High Precision Wraparound
Thin Film Chip Resistors
P
Vishay Sfernice
www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 53017
60 Revision: 15-Nov-07
For low noise and precision applications, superior stability,
low temperature coefficient of resistance, and low voltage
coefficient, VISHAY SFERNICE’s proven precision
thin film wraparound resistors exceed requirements of
MIL-PRF-55342G characteristics Y ± 10 ppm/°C (- 55 °C;
+ 155 °C) down to ± 5 ppm/°C (- 25 °C; + 85 °C).
FEATURES
•Load life stability at ± 70 °C for 2000 h:
0.1 % under Pn/0.05 % under Pd
•Low temperature coefficient down to 5ppm/°C
(- 25 °C; + 85 °C)
•Very low noise < 35 dB and voltage coefficient
< 0.01 ppm/V
•Resistance range: 10 Ω to 3 MΩ depending on size
•Extended ohmic value range (see table)
•Tolerances to ± 0.01 %
•In lot tracking ≤ 5 ppm/°C
•Termination: thin film technology
•Gold plated or pre-tinned terminations over nickel barrier
•Short circuits (jumpers) r < 50 mR, I < 2 A
DIMENSIONS in millimeters [inches]
Note:
(1) Pn = nominal power - Pd = derated power intended to improve stability
Note:
• Using special NiCr and CrSi alloys we are able to extend the ohmic value range as indicated above.
* Pb containing terminations are not RoHS compliant, exemptions may apply
Available
Pb-free
RoHS*
COMPLIANT
A
D
D
C
E
E
B
CASE
SIZE
DIMENSION POWER RATING
mW LIMITING
ELEMENT
VOLTAGE
V
RESISTANCE
RANGE
(see below for
extended Ω range)
ABCD/E
MAX. TOL.
+ 0.152 [+ 0.006]
MIN. TOL.
- 0.152 [- 0.006]
MAX. TOL.
+ 0.127 [+ 0.005]
MIN. TOL.
- 0.127 [- 0.005]
MAX. TOL.
+ 0.127 [+ 0.005]
MIN. TOL.
- 0.127 [- 0.005]
MAX. TOL.
+ 0.13 [+ 0.005]
MIN. TOL.
- 0.13 [- 0.005] Pn (1) Pd (1)
0402 1.00 [0.040] 0.60 [0.023] 0.5 [0.02] 0.38 [0.015] 63 40 50 10 Ω to 100 kΩ
0505 1.35 [0.053] 1.27 [0.050] 0.5 [0.02] 0.38 [0.015] 125 50 50 10 Ω to 260 kΩ
0603 1.52 [0.060] 0.75 [0.030] 0.5 [0.02] 0.38 [0.015] 125 100 75 10 Ω to 332 kΩ
0705/
0805 1.91 [0.075] 1.27 [0.050] 0.5 [0.02] 0.38 [0.015] 200 125 150 10 Ω to 511 kΩ
1005 2.54 [0.100] 1.27 [0.050] 0.5 [0.02] 0.38 [0.015] 250 125 75 10 Ω to 500 kΩ
1206 3.06 [0.120] 1.60 [0.063] 0.5 [0.02] 0.38 [0.015] 330 250 200 10 Ω to 1.5 MΩ
1505 3.81 [0.150] 1.32 [0.054] 0.5 [0.02] 0.38 [0.015] 350 175 75 10 Ω to 500 kΩ
2010 5.08 [0.200] 2.54 [0.100] 0.5 [0.02] 0.38 [0.015] 1000 500 300 10 Ω to 3 MΩ
EXTENDED OHMIC VALUE RANGE FOR HIGH PRECISION WRAPAROUND THIN FILM CHIP RESISTORS
SIZE TIGHTEST TOLERANCE % EXTENDED OHMIC VALUE RANGE BEST TCR (ppm/°C)
0402 0.1 > 100K - 1M 50
0505 0.05 260K/300K 25
0.1 300K/2.5M 50
0603 0.05 332K/500K 25
0.1 500K/2.5M 50
0705/ 0.05 511K - 750K 25
0805 0.1 750K - 5M 50
1206 0.05 1.5M - 2M 25
0.1 2M - 15M 50
2010 0.05 3M - 6M 25
0.25 6M - 50M 50
P
High Precision Wraparound
Thin Film Chip Resistors Vishay Sfernice
Document Number: 53017 For technical questions, contact: sfer@vishay.com www.vishay.com
Revision: 15-Nov-07 61
ELECTRICAL SPECIFICATIONS
Resistance range: 10 Ω to 3 MΩ
Resistance tolerance: ± 0.1 % to ± 5 %
± 0.01 % to ± 0.05 % on Y type
Power dissipation: Pn: 50 mW to 1 W
Pd: 37 mW to 500 mW
on tolerance tighter than ± 0.05 %
Temperature coefficient: see table below
MECHANICAL SPECIFICATIONS
Substrate: Alumina
Technology: Thin film
Film: Nickel chromium with mineral
passivation or CrSi
Protection: Silicon
Terminations: B type: SnPb over nickel barrier
for solder reflow
N type: SnAg over nickel barrier
G type: gold over nickel barrier
for other applications
CLIMATIC SPECIFICATIONS
Operating temp. range: - 55 °C to + 155 °C
For temperature up to 200 °C, please consult factory
Notes:
(1) Reduced operating range: 0 °C; + 70 °C option available for
(- 25 °C; + 85 °C)
(2) R > 50 Ω on request for lower values
POWER DERATING CURVE
PACKAGING
Several types of packaging are available: tube, waffle-pack,
and tape and reel.
Note:
(3) 12 mm on request
Note:
(4) Reduced operating range: 0 °C; + 70 °C option available for
(- 25 °C; + 85 °C)
TEMPERATURE COEFFICIENT
TCR CODE FILM
± 5 ppm/°C (1) ZNiCr
± 10 ppm/°C (2) YNiCr
± 25 ppm/°C E NiCr
± 50 ppm/°C H NiCr or CrSi
± 100 ppm/°C K NiCr or CrSi
SIZE
NUMBER OF PIECES PER PACKAGE
TAPE
WIDTH
WAFFLE
PAC K
2" × 2"
TAPE AND REEL
MIN. MAX.
0402
100
100 4000 8 mm
0505
0603
0805
0705
1005
140
1206
1505
60
2010 100 2000 8 mm (3)
BEST TOL. AND TCR V RESISTANCE VALUE
TIGHTEST
TOLERANCE CODE OHMIC VALUES TCR
ppm/°C
± 0.25 % C R > 10 Ω± 25
± 0.10 % B R > 25 Ω± 20
± 0.05 % W R > 39 Ω
± 10
± 5 (4)
± 0.02 % P R > 100 Ω
± 0.01 % L R > 250 Ω
07020 40 60 80 100 120 140 155
0
20
40
60
80
100
Ambient Temperature in °C
Rated Power (%)
P
Vishay Sfernice High Precision Wraparound
Thin Film Chip Resistors
www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 53017
62 Revision: 15-Nov-07
Note:
(1) 0.05 % under Pd
Note:
• Chips ready to be trimmed available. (Ptrim) - Please consult Sfernice.
PERFORMANCE
TESTS CONDITIONS
Ta2N DRIFTS NiCr
MIL-PRF-55342G
requirements
Ty p i c al
performances MIL-PRF-55342G Ty p i c a l
performances
Thermal shock MIL-PRF-55342G
MIL-STD-202 F-Method 107 F ± 0.25 % ± 0.02 % ± 0.05 % ± 0.02 %
Short time overload MIL-PRF-55342G
Para 3.10.4.7.5 ± 0.10 % ± 0.01 % ± 0.05 % ± 0.01 %
Low temperature operation MIL-PRF-55342G
Para 3.9 and 4.7.4 ± 0.25 % ± 0.01 % ± 0.05 % ± 0.01 %
Resistance to solder heat MIL-PRF-55342G
Para 3.12, 4.7.7, 4.7.1.2 ± 0.25 % ± 0.04 % ± 0.05 % ± 0.03 %
Moisture resistance
MIL-PRF-55342G
Para 3.13 and 4.7.8
MIL-STD-202 F-Method 106 E
± 0.40 % ± 0.01 % ± 0.10 % ± 0.01 %
High temperature MIL-PRF-55342G
Para 3.11 and 4.7.6 ± 0.20 % ± 0.075 % ± 0.05 % ± 0.05 %
Load life
MIL-PRF-55342G
2000 h Pn at 70 °C
MIL-STD-202 F-Method 108 A
± 0.50 % ± 0.15 % ± 0.5 % ± 0.10 % (1)
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: P0505Y1003BBT0933
GLOBAL
MODEL SIZE TCR VALUE TOLERANCE TERMINATION PACKAGING OPTION
P 0402
0505
0603
0705
0805
1005
1206
1505
2010
K = ± 100
ppm/°C
H = ± 50 ppm/°C
E = ± 25 ppm/°C
Y = ± 10 ppm/°C
X = Jumper
Z = ± 5 ppm
(0.70 °C)
The first three digits (2
digits are enough for
tolerance G and J) are
significant figures and
the last digit specifies
the number of zeros to
follow, R designates
decimal point
10R0 = 10 Ω
3901 = 3900 Ω
1004 = 1 MΩ
0R00 = Jumper
L = ± 0.01 %
P = ± 0.02 %
W = ± 0.05 %
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F = ± 1 %
G = ± 2 %
J = ± 5 %
S = Special
X = Jumper
B: SnPb over
nickel barrier
N: SnAg over
nickel barrier
G: Gold over
nickel barrier
blank =
Waffle Pack
T = Tape
Leave
blank if no
option
B: Lead bearing version
N and G: Lead
(Pb)-free/RoHS version
Historical Part Number example: P 0505 Y 1003 B B TR R0933 e2
P 0505 Y 1003 B B TR R0933 e2
HISTORICAL
MODEL SIZE TCR VALUE TOLERANCE TERMINATION PACKAGING OPTION RoHS
P 0402
0505
0603
0705
0805
1005
1206
1505
2010
K = ± 100
ppm/°C
H = ± 50 ppm/°C
E = ± 25 ppm/°C
Y = ± 10 ppm/°C
X = Jumper
Z = ± 5 ppm
(0.70 °C)
The first three digits (2
digits are enough for
tolerance G and J) are
significant figures and
the last digit specifies
the number of zeros to
follow, R designates
decimal point
10R0 = 10 Ω
3901 = 3900 Ω
1004 = 1 MΩ
0R00 = Jumper
L = ± 0.01 %
P = ± 0.02 %
W = ± 0.05 %
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F = ± 1 %
G = ± 2 %
J = ± 5 %
S = Special
X = Jumper
B: SnPb over
nickel barrier
N: SnAg over
nickel barrier
G: Gold over
nickel barrier
blank =
Waffle Pack
TR = Tape
Leave blank
if no option
e2:
tin/silver
e4:
gold
blank:
SnPb
B: Lead bearing version
N and G: Lead (Pb)-free/RoHS
version
0505Y1003PBBT 0 9 33
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
