2015-12-22 1
2015-1 2-22
Reflective Interrupter
Version 1.5
SFH 9206
Ordering Information
Features:
•940nm emitter in combination with a silicon NPN phototransistor
•Optimal operating distance 1 mm to 5 mm
•Daylight cut-off filter
•Emitter and detector electrically isolated
•Soldering Methode: IR Reflow Soldering
•Product complies to MSL Level 4
Applications
•Position reporting
•End position switch
•Speed monitoring and regulating
•Motion transmitter
Type: Collector-emitter current Ordering Code
IPCE [µA]
Kodak neutral white testcard with
90% reflection; IF = 10 mA, VCE = 5 V,
d = 1 mm
SFH 9206 160 ... 2000 Q65111A3179
SFH 9206-4 160 ... 320 -
SFH 9206-5/6 250 ... 800 Q65111A3177
SFH 9206-6/7 400 ... 1250 Q65111A3178
SFH 9206-8 1000 ... 2000 -
2015-12-22 2
Version 1.5 SFH 9206
Maximum Ratings (TA = 25 °C)
Characteristics (TA = 25 °C)
Parameter Symbol Values Unit
Emitter
Reverse voltage VR5 V
Forward current IF50 mA
Surge current
(tp ≤ 10 μs, D=0)
IFSM 0.7 A
Power consumption Ptot 100 mW
Thermal resistance junction - ambient 1) page 14 RthJA 495 K / W
Detector
Collector-emitter voltage VCE 16 V
Collector-emitter voltage
(t ≤ 2 min)
VCE 30 V
Emitter-collector voltage VEC 7 V
Collector current IC10 mA
Total Power dissipation Ptot 100 mW
Thermal resistance junction - ambient 1) page 14 RthJA 495 K / W
Interrupter
Operating and storage temperature range Top; Tstg -40 ... 100 °C
Ambient temperature range TA-40 ... 100 °C
Total power dissipation Ptot 150 mW
Electrostatic discharge VESD 2 kV
Parameter Symbol Values Unit
Emitter
Peak wavelength
(IF = 50 mA, tp = 20 ms)
(typ) λpeak 950 nm
Forward voltage
(IF = 50 mA, tp = 20 ms)
(typ (max)) VF1.45 (≤ 1.8) V
Reverse current
(VR = 5 V)
IRnot designed for
reverse operation
µA
Detector
Version 1.5 SFH 9206
2015-12-22 3
Capacitance
(VCE = 0 V, f = 1 MHz, E = 0)
(typ) CCE 5 pF
Dark current
(VCE = 16 V, E = 0)
(typ (max)) ICE0 1 (≤ 50) nA
Photocurrent (ambient light sensitivity)
(VCE = 5 V, EV = 1000 lx)
(typ) IPCE 1 mA
Interrupter
Collector-emitter current
(Kodak neutral white testcard with 90% reflection;
IF = 10 mA, VCE = 5 V, d = 1 mm)
(min)
(typ)
(max)
IPCE
IPCE
IPCE
160
600
2000
µA
µA
µA
Collector-emitter saturation voltage
(Kodak neutral white testcard with 90% reflection; IF
= 10 mA, IC = 55 µA, d = 1 mm)
(typ (max)) VCEsat 200 (< 600) mV
Switching Times
Turn-on time 2) page 14
(VCC = 5 V, IC = 100 µA, RL = 1 kΩ)
(typ) ton 40 µs
Rise time 2) page 14
(VCC = 5 V, IC = 100 µA, RL = 1 kΩ)
(typ) tr30 µs
Turn-off time 2) page 14
(VCC = 5 V, IC = 100 µA, RL = 1 kΩ)
(typ) toff 45 µs
Fall time 2) page 14
(VCC = 5 V, IC = 100 µA, RL = 1 kΩ)
(typ) tf40 µs
Parameter Symbol Values Unit
2015-12-22 4
Version 1.5 SFH 9206
Mechanical test setup
Test Circuit for Switching and Response Time
OHM02257
d
Reflector
with 90% reflexion
(Kodak neutral white
test card)
OHM02258
Ι
FVCC
RL
Ι
COutput
Version 1.5 SFH 9206
2015-12-22 5
Collector Current 3) page 14
IC / ICmax = f(d), TA = 25°C
Collector Current 3) page 14
IC = f(IF), d = 1 mm, 90% reflection, TA = 25°C
Photocurrent 3) page 14
IC = f(VCE), d = 1 mm, 90% reflection, TA = 25°C
Relative Spectral Emission 3) page 14
(typ) Irel = f(λ), TA = 25°C
0
OHF05610
I
C max
d
0
C
I
20
40
60
80
%
100
1 2 3 4 mm 5
Kodak neutral
white test card Mirror
70
50
30
10
OHF05611
C
I
0
0
1
2
3
4
5
6
F
I
5 10 15 20 25 30 35 mA 50
mA
OHF05612
02
10
CE
V
1010
1010-1 V
I
C
0.5
1.0
1.5
2.0
2.5
mA
I
= 15 mA
I
F= 10 mA
= 5 mA
F
I
= 20 mA
= 25 mA
F
I
I
F
F
800
0nm
%
OHF04134
20
40
60
80
100
I
rel
λ
850 900 950 1025
2015-12-22 6
Version 1.5 SFH 9206
Forward Current 3) page 14
IF = f(VF), single pulse, tp = 100 µs
Max. Permissible Forward Current
IF = f(TA)
Permissible Pulse Handling Capability
IF = f(tp), TA = 25 °C, duty cycle D = parameter
Permissible Pulse Handling Capability
IF = f(tp), TA = 85 °C, duty cycle D = parameter
OHF03828
F
I
10-4 0.5 1 1.5 2 2.5 V 3
100
A
0
F
V
-1
10
5
5
10-2
-3
5
10
210-1-2-3-4-5 1010 1010 10
t
p
10 10s10
0
T
t
A
I
F
D
=
I
P
T
F
P
t
OHF05615
1
0.5
0.01
0.05
0.1
0.2
0.02
0.005
D
=
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.55
0.60
0.75
210-1-2-3-4-5 1010 1010 10
t
p
10 10s10
0
T
t
A
I
F
D
=
I
P
T
F
P
t
OHF05616
1
0.5
0.01
0.05
0.1
0.2
0.02
0.005
D
=
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.55
0.60
0.75
Version 1.5 SFH 9206
2015-12-22 7
Dark Current 3) page 14
ICEO = f(TA), VCE = 20 V, E = 0
Collector-Emitter Capacitance 3) page 14
CCE = f(VCE), f = 1 MHz, E = 0, TA = 25°C
Relative Spectral Sensitivity 3) page 14
Srel = f(λ), TA = 25°C
Photocurrent 3) page 14
IPCE / IPCE(25°C) = f(TA), VCE = 5 V, If=10mA
T
OHF01530
A
CEO
Ι
-1
10
10 0
10 1
10 2
10 3
-25
nA
0 25 50 75 100
˚C
V
OHF01528
CE
-2
10
CE
C
10 -1 10 010 110 2
0V
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
5.0
pF
OHF05686
-60 ˚C
A
T
0
(25 ˚C)
I
pce
I
pce
0.2
0.4
0.6
0.8
1.0
1.4
-40 -20 0 20 40 60 80 120
2015-12-22 8
Version 1.5 SFH 9206
Pinning
Package Outline
Dimensions in mm.
Pin Description
1 Anode
2 -
3 Emitter
4 Collector
5 -
6 Cathode
Package
Reflective Interrupter
Approximate Weight:
40.0 mg
Version 1.5 SFH 9206
2015-12-22 9
Recommended Solder Pad
Dimensions in mm (inch).
Reflow Soldering Profile
Product complies to MSL Level 4 acc. to JEDEC J-STD-020D.01
0
0s
OHA04525
50
100
150
200
250
300
50 100 150 200 250 300
t
T
˚C
S
t
t
P
t
T
p
240 ˚C
217 ˚C
245 ˚C
25 ˚C
L
2015-12-22 10
Version 1.5 SFH 9206
Taping
Dimensions in mm (inch).
OHA04612
Profile Feature
Profil-Charakteristik
Ramp-up rate to preheat*)
25 °C to 150 °C
2 3 K/s
Time tS
TSmin to TSmax
tS
tL
tP
TL
TP
100 12060
10 20 30
80 100
217
2 3
245 260
3 6
Time
25 °C to TP
Time within 5 °C of the specified peak
temperature TP - 5 K
Ramp-down rate*
TP to 100 °C
All temperatures refer to the center of the package, measured on the top of the component
* slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range
Ramp-up rate to peak*)
TSmax to TP
Liquidus temperature
Peak temperature
Time above liquidus temperature
Symbol
Symbol
Unit
Einheit
Pb-Free (SnAgCu) Assembly
Minimum MaximumRecommendation
K/s
K/s
s
s
s
s
°C
°C
480
Version 1.5 SFH 9206
2015-12-22 11
Tape dimensions [mm]
Tape dim ensions in m m
Reel dimensions [mm]
Reel dim ensions in m m
Barcode-Product-Label (BPL)
Tape and Reel
12 mm tape with 1000 pcs. on ∅ 180 mm reel
WP0P1P2D0E F
12 + 0.3 / - 0.1 4 ± 0.1 4 ± 0.1
or
8 ± 0.1
2 ± 0.05 1.5 ± 0.1 1.75 ± 0.1 5.5 ± 0.05
A W Nmin W1W2max
180 12 60 12.4 + 2 18.4
D0
2
P
P
0
1
P
W
F E
Direction of unreeling
N
W1
2
W
A
OHAY0324
Label
Leader:
Trailer:
13.0
Direction of unreeling
±0.25
min. 160 mm *
min. 400 mm *
*) Dimensions acc. to IEC 60286-3; EIA 481-D
OHA04563
(G) GROUP:
1234567890(1T) LOT NO: (9D) D/C: 1234
(X) PROD NO: 123456789
(6P) BATCH NO: 1234567890
LX XXXX
RoHS Compliant
BIN1: XX-XX-X-XXX-X
ML
XTemp ST
XXX °C X
Pack: RXX
DEMY XXX
X_X123_1234.1234 X
9999(Q)QTY:
Semiconductors
OSRAM Opto
XX-XX-X-X
EXAMPLE
X_X123_1234.1234 XX_X123_1234.1234 X
EXAMPLE
EXAMPLE
EXAMPLE
XXXXXX
X_X123_1234.1234 XX_X123_1234.1234 X
XX-XX-X-XXX-XX-X-X
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
XXXXXX
X_X123_1234.1234 XX_X123_1234.1234 X
XX-XX-X-XXX-XX-X-X
EXAMPLE
Pack: RXX
XXX
X_X123_1234.1234 XX_X123_1234.1234 X
XX-XX-X-X
EXAMPLE
Pack: RXXPack: RXX
DEMY DEMY
EXAMPLE
12341234
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
(9D) D/C:(9D) D/C:
12341234
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
1234
EXAMPLE
Pack: RXXPack: RXX
DEMY
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
(9D) D/C:(9D) D/C:
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
(9D) D/C:
(9D) D/C:
1234
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
(9D) D/C:
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
12345678901234567890
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
(6P) BATCH NO:(6P) BATCH NO:
12345678901234567890
SemiconductorsSemiconductors
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
(6P) BATCH NO:(6P) BATCH NO:
12345678901234567890
EXAMPLE
SemiconductorsSemiconductors
OSRAM OptoOSRAM Opto
EXAMPLE
EXAMPLE
1234567890
X_X123_1234.1234 X
Pack: RXX
DEMY
X_X123_1234.1234 X
(9D) D/C:
1234
(9D) D/C:
1234567890
(6P) BATCH NO:
1234567890
OSRAM Opto
XXX
X_X123_1234.1234 X
XX-XX-X-X
Pack: RXX
DEMY
Semiconductors
2015-12-22 12
Version 1.5 SFH 9206
Dry Packing Process and Materials
Note:
Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card.
Regarding dry pack you will find further information in the internet. Here you will also find the normative
references like JEDEC.
Transportation Packing and Materials
Dimensions of transportation box in mm
Width Length Height
195 ± 5 195 ± 5 30 ± 5
OHA00539
OSRAM
Moisture-sensitive label or print
Barcode label
Desiccant
Humidity indicator
Barcode label
OSRAM
Please check the HIC immidiately after
bag opening.
Discard if circles overrun.
Avoid metal contact.
WET
Do not eat.
Comparator
check dot
parts still adequately dry.
examine units, if necessary
examine units, if necessary
5%
15%
10% bake units
bake units
If wet,
change desiccant
If wet,
Humidity Indicator
MIL-I-8835
If wet,
Moisture Level 3 Floor time 168 Hours Moisture Level 6 Floor time 6 Hours
a) Humidity Indicator Card is > 10% when read at 23 ˚C ± 5 ˚C, or
reflow, vapor-phase reflow, or equivalent processing (peak package
2. After this bag is opened, devices that will be subjected to infrared
1. Shelf life in sealed bag: 24 months at < 40 ˚C and < 90% relative humidity (RH).
Moisture Level 5a
at factory conditions of
(if blank, seal date is identical with date code).
a) Mounted within
b) Stored at
body temp.
3. Devices require baking, before mounting, if:
Bag seal date
Moisture Level 1
Moisture Level 2
Moisture Level 2a
4. If baking is required,
b) 2a or 2b is not met.
Date and time opened:
reference IPC/JEDEC J-STD-033 for bake procedure.
Floor time see below
If blank, see bar code label
Floor time > 1 Year
Floor time 1 Year
Floor time 4 Weeks
10% RH.
_
<
Moisture Level 4
Moisture Level 5
˚C).
OPTO SEMICONDUCTORS
MOISTURE SENSITIVE
This bag contains
CAUTION
Floor time 72 Hours
Floor time 48 Hours
Floor time 24 Hours
30 ˚C/60% RH.
_
<
LEVEL
If blank, see
bar code label
OHA02044
PACKVAR:
R077
Additional TEXT
P-1+Q-1
Multi TOPLED
Muster
OSRAM Opto
Semiconductors
(6P) BATCH NO:
(X) PROD NO:
1
0
(9D) D/C:
11
(1T) LOT NO:
210021998
123GH1234
024 5
(Q)QTY:2000
0144
(G) GROUP:
260 C RT
240 C R
3
220 C R
ML
Bin3:
Bin2: Q-1-20
Bin1: P-1-20
LSY T676
2
2a
Temp ST
R18DEMY
PACKVAR:
R077
Additional TEXT
P-1+Q-1
Multi TOPLED
Muster
OSRAM Opto
Semiconductors
(6P) BATCH NO:
(X) PROD NO:
1
0
(9D) D/C:
1
1
(1T) LOT NO:
210021998
123GH1234
02
4 5
(Q)QTY:2000
0144
(G) GROUP:
260 C RT
240 C R
3
220 C R
ML
Bin3:
Bin2: Q-1-20
Bin1: P-1-20
LSY T676
2
2a
Temp ST
R18DEMY
OSRAM
Packing
Sealing label
Barcode label
Moisture Level 3 Floor time 168 Hours Moisture Level 6 Floor time 6 Hours
a) Humidity Indicator Card is > 10% when read at 23 ˚C ± 5 ˚C, or
reflow, vapor-phase reflow, or equivalent processing (peak package
2. After this bag is opened, devices that will be subjected to infrared
1. Shelf life in sealed bag: 24 months at < 40 ˚C and < 90% relative humidity (RH).
Moisture Level 5a
at factory conditions of
(if blank, seal date is identical with date code).
a) Mounted within
b) Stored at
body temp.
3. Devices require baking, before mounting, if:
Bag seal date
Moisture Level 1
Moisture Level 2
Moisture Level 2a
4. If baking is required,
b) 2a or 2b is not met.
Date and time opened:
reference IPC/JEDEC J-STD-033 for bake procedure.
Floor time see below
If blank, see bar code label
Floor time > 1 Year
Floor time 1 Year
Floor time 4 Weeks
10% RH.
_
<
Moisture Level 4
Moisture Level 5
˚C).
OPTO SEMICONDUCTORS
MOISTURE SENSITIVE
This bag contains
CAUTION
Floor time 72 Hours
Floor time 48 Hours
Floor time 24 Hours
30 ˚C/60% RH.
_
<
LEVEL
If blank, see
bar code label
Barcode label
Version 1.5 SFH 9206
2015-12-22 13
Disclaimer
Language english will prevail in case of any discrepancies or deviations between the two language wordings.
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances.
For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the latest version in the Internet.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any
costs incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose!
Critical components* may only be used in life-support devices** or systems with the express written approval of
OSRAM OS.
*) A critical component is a component used in a life-support device or system whose failure can reasonably be
expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that
device or system.
**) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or
maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be
endangered.
2015-12-22 14
Version 1.5 SFH 9206
Glossary
1) Thermal resistance: Mounting on PC-board with > 5 mm2 pad size
2) IC as a function of the forward current of the emitting diode, the degree of reflection and the distance between
reflector and component (d)
3) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or
calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily
correspond to the actual parameters of each single product, which could differ from the typical data and calculated
correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data
will be changed without any further notice.
2015-12-22 15
Version 1.5 SFH 9206
Published by OSRAM Opto Semiconductors GmbH
Leibnizstraße 4, D-93055 Regensburg
www.osram-os.com © All Rights Reserved.