Adapters 319-044 EMI/RFI Shield Sock Shrink Boot Adapter with Optional Shrink Boot Standard Profile - Self Locking - Rotatable Coupling CONNECTOR DESIGNATOR: A F H L S Finish B = Cadmium Plate, Olive Drab C = Anodize, Black G = Hard Coat, Anodic M = Electroless Nickel NF = Cadmium Plate, Olive Drab over Electroless Nickel (See Page H-3) MIL-DTL-5015, -26482, Series II and -83723 Series I and III MIL-DTL-38999 Series I, II Angle and Profile H = 45 J = 90 S = Straight MIL-DTL-38999 Series III and IV LN29729 Shield Length 1-inch increments Minimum 6 Inches Shrink Boot See Table IV (Omit for None) PATT 105, PATT 603, PATT 608 ROTATABLE COUPLING 319 F J 044 M SELF-LOCKING Product Series Connector Designator Basic Part Number TANDAR S A Thread (Table I) Length .060 (1.52) Min. Order Length 2.0 Inch (See Note 6) T OT D BO KI T 16 06 - 6 - 4 Shell Size See Table III Cable Entry See Table IV Length: S ONLY 1/2-inch increments (e.g. 4 = 2 inches) Add "T" to Part Number for Standard Boot Length * O-Ring * Length .060 (1.52) Minimum Order Length 1.5 Inch (See Note 6) E Typ. (Table I) STYLE 2 (STRAIGHT See Note 5) T Cable Entry Single Layer Shield Typ. (Tinned Copper) Anti-Rotation Device (Typ.) H F (Table III) (Table III) G (Table III) H 1.00 (25.4) Max J (Table III) .140/.130 (3.6/3.3) Typ. Shield Length (Approx.) STYLE 2 (45 & 90 See Note 5) (c) 2011 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com H-14 E-Mail: sales@glenair.com Adapters 319-044 EMI/RFI Shield Sock Shrink Boot Adapter with Optional Shrink Boot Standard Profile - Self Locking - Rotatable Coupling See Pages H-2 and H-3 for unabridged Tables I and II, and Pages H-4 and H-5 for MIL-DTL-5015 TABLE III: Connector Designators and Dimensions Shell Size - Conn. Desig. A-F-L-S H F Max G Max H Max J Max TABLE IV: Cable Entry, Dimensions and Shrink Boot 08 09 .986 (25.0) 1.045 (26.5) 1.096 (27.8) 1.155 (29.3) Dash No. 10 11 1.016 (25.8) 1.075 (27.3) 1.166 (29.6) 1.225 (31.1) 01 .188 (4.8) N/A 12 13 1.038 (26.4) 1.097 (27.9) 1.226 (31.1) 1.285 (32.6) 02 .2S0 (6.4) N/A 14 15 1.056 (26.8) 1.125 (28.6) 1.286 (32.7) 1.345 (34.2) 03 .312 (7.9) 770-001S103 16 17 1.066 (27.1) 1.145 (29.1) 1.346 (34.2) 1.405 (35.7) 18 19 1.106 (28.1) 1.165 (29.6) 1.396 (35.5) 1.455 (37.0) 04 .375 (9.5) 770-001S103 20 21 1.136 (28.9) 1.195 (30.4) 1.466 (37.2) 1.525 (38.7) 05 .438 (11.1) 770-001S103 22 23 1.156 (29.4) 1.215 (30.9) 1.516 (38.5) 1.575 (40.0) 06 .500 (12.7) 770-001S104 24 25 1.186 (30.1) 1.245 (31.6) 1.586 (40.3) 1.645 (41.8) 07 .562 (14.3) 770-001S104 08 .625 (15.9) 770-001S104 09 .688 (17.5) 770-001S105 10 .750 (19.1) 770-001S105 11 .812 (20.6) 770-001S105 12 .875 (22.2) 770-001S106 13 .938 (23.8) 770-001S106 14 1.000 (25.4) 770-001S106 3. Metric dimensions (mm) noted in parentheses are for reference only. 15 1.250 (31.8) 770-001S107 4. O-Ring not supplied with Connector Designator A. 16 1.500 (38.1) 770-001S108 5. When maximum entry is exceeded, Style 2 will be supplied and dimensions F, G, H and J will not apply. Please consult factory. 17 1.750 (44.5) 770-001S108 6. For shorter lengths on straight backshells, please consult the factory. 18 2.000 (50.8) 770-001S109 19 1.125 (28.6) 770-001S107 20 1.375 (34.9) 770-001S107 21 1.625 (41.3) 770-001S108 22 1.062 (27.0) 770-001S106 23 1.188 (30.2) 770-001S107 24 1.875 (47.6) 770-001S109 APPLICATION NOTES 1. Cable Entry is defined as the accomodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 2. See Backshell Interface Dimensions and Standards on Pages H-4 and H-5. (c) 2011 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Cable Entry Shrink Boot Part Number Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com H-15 E-Mail: sales@glenair.com H