T, M, C
www.vishay.com Vishay Dale
Revision: 09-Aug-2018 1Document Number: 33003
For technical questions, contact: thermistor1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NTC Thermistors, Radial Leaded and Coated
FEATURES
Small size - conformally coated
Wide resistance range
Available in 7 different R-T curves
Available in point matched tolerances down to
1 % and curve tracking precision down to
± 0.2 °C
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
Temperature measurement, sensing and control in
industrial, consumer and telecom applications. For
on-board sensing or for accurate remote sensing in metal
probes or housings.
DESCRIPTION
Models T, M, and C are conformally coated, leaded
thermistors. The coating is baked-on phenolic for durability
and long-term stability. Models M and C have tinned solid
copper leads. Model T has solid nickel wires with Teflon®
insulation.
DESIGN-IN SUPPORT
For complete Curve Computation, visit:
www.vishay.com/thermistors/curve-computation-list/
Note
(1) For information only, dissipation factor, response time, and thermal time constant are wire type and product size dependent
Note
Most popular and available values, intermediate resistance values and tolerances available on request
QUICK REFERENCE DATA
PARAMETER VALUE UNIT
Resistance value at 25 °C 30 to 1M
Tolerance on R25-value
(point matched) ± 1, ± 2, ± 3, ± 5, ± 10 %
Temperature accuracy
(curve tracking) ± 0.2, ± 0.5, ± 1 °C
B25/75 -value 3477 to 4842 K
B25/85 -value 3468 to 4875 K
Maximum dissipation 50 to 100 mW
Dissipation factor 
(for information only) 2 to 3.5 mW/K
Thermal time constant 
(for information only) 6 to 14 s
Response time (oil)
(for information only) 1.3 s
Operating temperature range
at zero power (short term) -40 to +125 (150) °C
Weight 0.075 to 0.15 g
T, M, C PRODUCT DATA AND R25 RESISTANCE RANGE AVAILABILITY
CURVE B25/75
(K)
B25/85
(K)
TCR25
(%/K)
T
(k)
M
(k)
C
(k)
R25 ± TOL.
AVAILABILITY
2 3477 3486 -3.84 0.03 to 3.3 1, 2, 3, 5, 10
9 3679 3694 -4.03 10 to 56 1, 2, 3, 5, 10
8 3925 3943 -4.30 20 to 220 1, 2, 3, 5, 10
1 3964 3974 -4.39 0.2 to 18 1, 2, 3, 5, 10
4 4247 4262 -4.67 10 to 100 1, 2, 3, 5, 10
7 4437 4461 -4.83 10 to 270 1, 2, 3, 5, 10
12 4842 4875 -5.23 47 to 1000 1, 2, 3, 5, 10
Maximum dissipation at 25 °C in mW 50 75 100
Dissipation factor in mW/K (1) 2.0 2.5 3.0
Response time in s (1) 1.3 1.2 1.4
Thermal time constant in s (1) 14 10 6
STANDARD RESISTANCE VALUES at 25 °C in
33 82 270 680 2.2K 5.6K 18K 50K 150K 500K
39 100 330 820 2.7K 6.8K 22K 56K 220K 560K
47 120 390 1K 3.3K 8.2K 27K 68K 270K 680K
50 150 470 1.2K 3.9K 10K 33K 82K 330K 820K
56 180 500 1.5K 4.7K 12K 39K 100K 390K 1M
68 220 560 1.8K 5.0K 15K 47K 120K 470K
T, M, C
www.vishay.com Vishay Dale
Revision: 09-Aug-2018 2Document Number: 33003
For technical questions, contact: thermistor1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) See following pages for tolerance explanations and details
DIMENSIONS in inches (millimeters)
Note
(1) Additional wire gauges (non-insulated) available as AWG24 (type E), AWG26 (type B) and AWG32 (type F). Please contact Vishay
(thermistor1@vishay.com) for further details
Note
Maximum body diameter is dependent on selected curve number and value, the lower resistance values have the largest diameter. For a
specific part number within the given resistance ranges, please contact thermistor1@vishay.com for maximum diameter information
GLOBAL PART NUMBER AND ORDERING INFORMATION
Global Part Numbering: 01C2001FP for POINT MATCHED THERMISTORS
CURVE NR GLOBAL MODEL RESISTANCE VAL POINT MATCH
TOLERANCE PACKAGING
01
02
04
07
08
09
12
T
M
C
2001 = 2K
1503 = 150K
F = ± 1 %
G = ± 2 %
H = ± 3 %
J = ± 5 %
K = ± 10 %
F = lead (Pb)-free, bulk
P = tin / lead, bulk
Global Part Numbering: 01C2001SPC3 for CURVE TRACKING THERMISTORS
CURVE GLOBAL MODEL RESISTANCE VAL CHARACTERISTICS PACKAGING CURVE TRACK
TOLERANCE (1)
01
04
08
09
T
M
C
2001 = 2K SF = lead (Pb)-free,
bulk
P = tin / lead, bulk
A3 A4 A5 A8
B3 B4 B5 B8
C3 C5 C8
PRODUCT TYPE WIRE GAUGE/DIAMETER (1)
Type M AWG 30: 0.0100 (0.254)
Type C AWG 28: 0.0126 (0.320)
Type T Insulated AWG 30: 0.0100 (0.254)
CURVE NUMBER R25 MIN.
()
MAX. DIAMETER
(INCH (mm))
STANDARD R25 RANGE
()
MAX. DIAMETER
(INCH (mm))
2 30 0.342 (8.69) 330 to 3K 0.095 (2.41) to 0.136 (3.45)
9 10K 0.150 (3.81) 10K to 56K 0.095 (2.41) to 0.150 (3.81)
8 20K 0.131 (3.33) 27K to 220K 0.095 (2.41) to 0.125 (3.18)
1 200 0.315 (8.00) 1.8K to 18K 0.095 (2.41) to 0.136 (3.45)
4 10K 0.136 (3.45) 10K to 100K 0.095 (2.41) to 0.136 (3.45)
7 10K 0.177 (4.50) 27K to 270K 0.095 (2.41) to 0.136 (3.45)
12 47K 0.252 (6.40) 330K to 1M 0.095 (2.41) to 0.136 (3.45)
TINNED COPPER WIRE TEFLON INSULATED NICKEL WIRE
D
0.25 (6.35) NOM.
1.5 (36.1) MIN.
CLEAN LEAD LENGTH 3 ± 0.25 (76.2 ± 6.4)
D
TYPE M, C TYPE T
2001 PF1C0
2001 PCS1C0 3
T, M, C
www.vishay.com Vishay Dale
Revision: 09-Aug-2018 3Document Number: 33003
For technical questions, contact: thermistor1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TOLERANCES AVAILABLE FOR TYPE T, M, AND C THERMISTORS
DESCRIPTION OF THERMISTOR TOLERANCES
The many applications of thermistors have mandated the need for two basic tolerance schemes for these products - curve
tracking and point match thermistors. An example of the resistance tolerance at various temperatures for the two different
tolerancing methods is described in the following graph:
Fig. 1
CURVE TRACKING TOLERANCE
Thermistors are calibrated at the high temperature of the curve track range and then final tested at the low temperature of
the curve track range. This ensures that the thermistor will meet the specified temperature accuracy at every temperature
within the desired temperature range. Several temperature ranges are available and the accuracy of the thermistor may be
± 0.2 °C, ± 0.5 °C, and ± 1.0 °C. The curve tracking temperature ranges and their code designators are shown in figure 1 and
“Standard Electrical Specifications for Curve Tracking Thermistors” table.
To specify, add the appropriate suffix from the following table to the part number.
Example: 01M1002SFB3 = curve 1, 10 k at +25 °C, curve tracking to ± 0.5 °C from 0 °C to +70 °C
STANDARD ELECTRICAL SPECIFICATIONS FOR CURVE TRACKING THERMISTORS
TEMPERATURE
RANGE FOR
SPECIFIED
ACCURACY
0 °C to +70 °C 0 °C to +100 °C 25 °C to +90 °C 0 °C to +50 °C
ACCURACY ± 1 °C ± 0.5 °C ± 0.2 °C ± 1 °C ± 0.5 °C ± 0.2 °C ± 1 °C ± 0.5 °C ± 0.2 °C ± 1 °C ± 0.5 °C ± 0.2 °C
PART NO.
SUFFIX - A3 - B3 - C3 - A4 - B4 - C4 - A5 - B5 - C5 - A8 - B8 - C8
CURVE NUMBER
01XX XXXn/aXX XXX X
04XX XXXn/aXX XXX X
08XX XXXn/aXX XXX X
09XX XXXn/aXX XXX X
TOLERANCE (± %)
TEMPERATURE (°C)
± 5 % POINT MATCH CURVE
± 1 °C CURVE TRACK CURVE
25 °C
10
9
8
7
6
5
4
3
2
1
0
- 50
- 40
- 30
- 20
- 10
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
A5
A4
A8
A3
T, M, C
www.vishay.com Vishay Dale
Revision: 09-Aug-2018 4Document Number: 33003
For technical questions, contact: thermistor1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
POINT MATCH TOLERANCE
The standard leaded thermistors are calibrated and tested at 25 °C to a tolerance of ± 5 % or ± 10 %; however, tighter tolerance,
point matched thermistors are readily available as are special point match temperatures to fit your application.
Since these thermistors have only one controlled point of reference (the point match temperature), the resistance at other
temperatures is given by the specific curve resistance vs. temperature ratio.
POINT MATCH TOLERANCES VS. TEMPERATURE
Fig. 1
Point match resistance tolerances at temperatures other
than 25 ºC are not the same as at the calibration
temperature. This difference is presented in figure 2.
The tolerance at any given temperature is the point match
tolerance plus a manufacturing tolerance depending on the
specific curve.
DESIGN-IN SUPPORT
A spreadsheet is available for the Vishay thermistor part numbers that gives you the resistance vs temperature data, the
temperature coefficients and accuracy levels at any given temperature range and step. The Steinhart & Hart formula and
coefficients A, B, and C are shown as well. This data can be obtained by visiting the Vishay NTC curve computation page at:
www.vishay.com/thermistors/curve-computation-list/ or send your part number with required temperature range and step to
thermistor1@vishay.com.
25 °C
NOMINAL R vs. T
MAX. R vs. T
MIN. R vs. T
PIVOT POINT
(CALIBRATION TEMPERATURE)
TEMPERATURE
RESISTANCE
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
01M2002SPB3 01M2502SPB3 01M1502SPB4 07C1003SPA3 01M5001JP 01M1002SPB3 01M1502SPB8
01M1002SPB4 01M1502SPA3 01M1002SPA3 01M1502SPA4 01M1002SPA5 12W5003KP 08C3002SPA3
01C3000SPC3 02C1751FP 04M6802JP 01C5101FP 01M1501JP 12M1003JP 02M1501JP 04T5002FP
04T5002JP 01M5001SPB4 01M6001SPC3 01M5001SPB3 01M5001SPC3 01C9001JP 01C4001JP 12C1503JP
01M1701JP 12C2503JP 01C1752SPC3 01M5001KP 01M1601KP 02C7500KP 12M5002JP 01M5000JP
02C9000FP 7M1203-5 7M5002-5 7M7502-5 01M2252FP 09T1002JP 09T1002FP 01T1002FP 01T1002JP
12W1003KP 01C1002JP 01C1002FP 01C6001JP 01C6001KP 04M1003SPC3 01M6001FP 01M6001JP
01T2251SPA3 02M1801SPB2 08C1003SPC3 08C1003SPB5 07C5002FP 02C5000SPA3 02C3000SPA2
08C1003FP 02C1001FP 04C1003SPC3 07C1003KP 02C1001KP 01C1001FP 01C1001JP 02C6000KP
02C5000KP 07M1203KP 02C5000FP 4M3002-C3 4M5002-A4 01M2251FP 01T3001FP 02M1201SPB3
04M5002FP 04T5002SPC5 04T1003JP 08T1003JP 02C1801JP 02C8000FP 08T4002SPC5 01C3001KP
08M3002SPB5 01C2001JP 01C6801SPC3 01T1001FP 04M1003JP 2C2200-5 12M1004JP 01M1502JP
01C7001JP 01C7001FP 08T1003SPC5 01T5001FP 01T5001JP 01M2502JP