System pro Mcompact
Supplementary Protectors
Miniature MCCBs
AC1645
Table of Content
pro Mcompact
General information ............................................................................................1.1
S200 - Supplementary protectors ......................................................................1.7
S200U - Miniature MCCBs ................................................................................1.12
Accessories ........................................................................................................1.16
Technical data ....................................................................................................1.21
Approximate dimension ......................................................................................1.25
Cross-reference ..................................................................................................1.28
pro MSupplementary Protectors
General information ............................................................................................2.2
S280 (W) ..............................................................................................................2.4
S280UC ..............................................................................................................2.5
S290 ....................................................................................................................2.7
S220 ....................................................................................................................2.8
Accessories ........................................................................................................2.9
Technical data ....................................................................................................2.13
Approximate dimension ......................................................................................2.17
pro MS500 Supplementary Protectors
S500 ....................................................................................................................3.2
S500UC ..............................................................................................................3.4
Accessories ........................................................................................................3.6
Technical data ....................................................................................................3.7
Approximate dimension ......................................................................................3.8
pro Mcompact - Residual current devices
F200AC, F200A ..................................................................................................4.2
Approximate dimension & circuit diagrams........................................................4.3
pro M- Modular installation equipment
Switches..............................................................................................................5.2
Disconnect switches ..........................................................................................5.3
Pilot devices ........................................................................................................5.4
Technical data ....................................................................................................5.5
Approximate dimensions ....................................................................................5.6
1
2
3
4
5
ABB 1.1
AC 1645 – 11/07
pro M compact
Supplementary Protectors
Miniature MCCBs
The new generation of miniature circuit breakers.
System pro Mcompact S200 series.
The new S200 series covers all your circuit breaker needs
up to 63 amps. We have redesigned our popular supplementary
protectors and have now introduced a brand new range of
miniature molded case circuit breakers suitable for use as
branch circuit protection according to UL 489/CSA C22.2 No.5.0.
Alongside the redesigned S200 supplementary protectors,
the new S200 U and S200 UP miniature MCCBs offer
the familiar ABB advantages; small size, excellent
protection and easy installation.
S200 U and UP series are UL 489, CSA C22.2
No 5 approved as well as IEC 947.
For the first time one circuit breaker
fulfills North American and global approval
requirements. Global circuit breakers for
OEMs building global equipment.
By building on the proven technology
of our supplementary protectors and
introducing the new range of miniature
MCCBs, ABB now offer a full solution of the
highest quality that fits into the minimum
space. This allows you to better meet the
wishes of your customers by offering even
more compact global solutions.
The new S200 series is the first truly
compact and modular full circuit breaker
solution for use in both North American
and global markets.
UL
pro Mcompact
pro Mcompact
1.2ABB
AC1645 – 11/07
General information
Tripping characteristics
Time-current curves
ABB miniature circuit breakers are available with different trip
characteristics, allowing for maximum system protection.
B characteristic
Available with the S200 series has rated currents of 6 through 63
amperes in 10 steps. The "B" time-current curve is designed primarily
for use in cable protection applications. Instantaneous tripping occurs
between approximately 3 to 5 times rated current in 50/60Hz systems.
This quick trip curve maximizes protection of control circuits under low
short circuit fault levels that could damage control wiring.
C characteristic
Available in the S200 series with rated currents up through 63
amperes. The "C" time-current curve is designed for medium magnetic
start-up currents. Instantaneous tripping occurs between 5 and 10
times rated current in 50/60 Hz systems. The ‘’C’’ characteristic is also
available in other S2 series MCBs.
D characteristic
The new magnetic trip action has an instantaneous trip point of
approximately 15 times the breaker rating. Thus, the S200-D can
be a good protective solution for applications involving high in-rush
transformers, motors and other high inductive systems. The 200-D
is also suitable for any application where a high instantaneous trip
point is desired. Available in the S200 series.
K characteristic
The "K" time-current characteristic considers high magnetic start-up
currents from motors, transformers and other equipment.
Instantaneous tripping occurs between 8 and 12 times rated current in
50/60Hz systems. The "K" characteristic is available up through 63
amperes.
The "K" curve offers the best protection for the broadest range of elec-
trical systems. The higher magnetic trip settings maximizes protection
while allowing for higher in-rush currents during system start-up.
Available in the S200, S200U and S200UP. series.
Z characteristic
Also available up through 63 amperes, the "Z" characteristic offers
instantaneous tripping between 2 and 3 times rated current in 50/60Hz
systems.
Many applications require a very low short circuit trip settings in order
to protect semiconductor or other sensitive devices and the "Z" trip
characteristic may provide maximum protection and service in these
applications. Available in S200, S200U and S200UP.
General information
Miniature circuit breakers (MCBs) are used throughout the world in
all types of electrical installations. ABB MCBs are recognized by UL
and CSA as supplementary circuit protectors in systems rated 240VAC
and 480VAC.
MCBs are approved per IEC-898 and VDE 0641, and certified under
IEC-947 and VDE 0660 standards for use in systems rated 415VAC.
MCBs can be applied to 16 2/3Hz – 400Hz and DC power systems.
Continuous current ratings are as low as 0.2 amperes and up to 63
amperes maximum.
MCBs are of compact size and can be quickly mounted on standard
35mm DIN rail or can be front mounted by use of a front mounting kit.
MCBs include line and load side terminals for conductors from 18
through 4AWG (0.75 – 25mm2).
MCBs can also be connected via busbar conductors which can be
either upper or lower mounted for top feed or bottom feed. Dual func-
tion terminals allow busbars to be connected with main incoming line
conductors without separate lugs.
Accessories
Auxiliary devices can be added to S200 series MCBs:
• Shunt trips
• Auxiliary contacts
• Trip contacts
• Aux/trip contacts
• Undervoltage release
Accessory device modules can be field mounted to all above listed
ABB MCBs.
Applications
MCBs can be used for equipment protection, in commercial appli-
ances, protection of control circuits against overcurrent faults, comput-
er equipment and other computer peripheral devices.
UL 489 / CSA C22.2 NO5.0
S200U and S200UP MCBs are listed as molded case circuit breakers
for use as branch circuit devices. MCCBs and accessories are listed
under UL file E212323 and CSA file LR98793 certificate 1546332.
UL 1077 / CSA C22.2 NO235
S200 and S200P MCBs are recognized as supplementary protectors
and are intended for use as overcurrent protection within an appliance
or other electrical equipment where branch circuit overcurrent protec-
tion is already provided or not required. MCBs and accessories are
recognized under UL File E76126 and CSA file LR98793 certificates
1530107 and 1546299.
pro Mcompact
ABB 1.3
AC 1645 – 11/07
General information
Interrupting ratings
Trip characteristics overview
120 VAC 10kA 6 - 63A S200-B Single pole
0.5 - 63A S200-C, D, K, Z Single pole
240 VAC 10kA 6 - 63A S200-B Single pole
0.5 - 63A S200-C, D, K, Z Single pole
6 - 63A S200-B Multi pole
0.5 - 63A S200-C, D, K, Z Multi pole
277 VAC 6kA 6 - 63A S200-B Single pole
0.5 - 63A S200-C, D, K, Z Single pole
480Y/277 VAC 6kA 6 - 63A S200-B Multi pole
0.5 - 63A S200-C, D, K, Z Multi pole
60 VDC 10kA 6 - 63A S200-B Single pole
0.5 - 63A S200-C, D, K, Z Single pole
125 VDC 10kA 6 - 63A S200-B Multi pole
0.5 - 63A S200-C, D, K, Z Multi pole
Voltage Rated interrupting Rated MCB Comment
capacity current type
Trip characteristics overview
B 3 - 5X 1.25X S200
C 5 - 10X 1.25X S200
D 10 - 20X 1.25X S200
K 8 - 12X 1.05X S200
Z 2 - 3X 1.05X S200
Curve Magnetic Thermal Series
characteristic 1characteristic
1All values are relative to MCB's ampere rating.
Supplementary Protectors
Interrupting ratings
120 VAC 10kA 0.2 - 63A S200U-K, Z Single pole
0.2 - 25A S200UP-K, Z Single pole
240 VAC 10kA 0.2 - 63A S200U-K, Z Single pole
0.2 - 63A S200U-K, Z Multi pole
0.2 - 25A S200UP-K, Z Single pole
0.2 - 25A S200UP-K, Z Multi pole
277 VAC 10kA 0.2 - 25A S200UP-K, Z Single pole
480Y/277 VAC 10kA 0.2 - 25A S200UP-K, Z Multi pole
Voltage Rated interrupting Rated MCB Comment
capacity current type
Miniature Molded Case Circuit Breakers
Interrupting ratings
pro Mcompact
1.4ABB
AC1645 – 11/07
General information
Tripping curves
Supplementary Protectors
pro Mcompact
ABB 1.5
AC 1645 – 11/07
General information
Tripping curves
Miniature MCCBs
S200U
S200UP
pro Mcompact
1.6ABB
AC1645 – 11/07
General information
Construction details
Space for
identification
marker
Tripping lever
Operator
Operating
mechanism
Electro-magnetic protection
Thermal protection-bimetal
Upper terminal
Fixed contact
Moving contact
Lower terminal
DIN rail holder
Arc chamber
pro Mcompact
ABB 1.7
AC 1645 – 11/07
UL 1077 CSA C22.2 NO235
IEC-898/947-2
Cable protection
B
S200
480Y/277VAC
Supplementary Protectors
Rated Catalog List Delivery Sugg. Wgt. kg
current number price class order (1 pc.)
qty
Rated Catalog List Delivery Sugg. Wgt. kg
current number price class order (1 pc.)
qty
S200
B
Discount schedule DS-S2
S201-B16
S202-B16
S203-B16
S204-B16
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
3 pole
6 S203-B6
10 S203-B10
13 S203-B13
16 S203-B16
20 S203-B20 A 1 0.375
25 S203-B25
32 S203-B32
40 S203-B40
50 S203-B50
63 S203-B63
3 pole + neutral
6 S203-B6NA
10 S203-B10NA
13 S203-B13NA
16 S203-B16NA
20 S203-B20NA C 1 0.500
25 S203-B25NA
32 S203-B32NA
40 S203-B40NA
50 S203-B50NA
63 S203-B63NA
4 pole
6 S204-B6
10 S204-B10
13 S204-B13
16 S204-B16
20 S204-B20 C 1 0.510
25 S204-B25
32 S204-B32
40 S204-B40
50 S204-B50
63 S204-B63
1 pole
6 S201-B6
10 S201-B10
13 S201-B13
16 S201-B16
20 S201-B20 A 10 0.125
25 S201-B25
32 S201-B32
40 S201-B40
50 S201-B50
63 S201-B63
1 pole + neutral
6 S201-B6NA
10 S201-B10NA
13 S201-B13NA
16 S201-B16NA
20 S201-B20NA C 5 0.250
25 S201-B25NA
32 S201-B32NA
40 S201-B40NA
50 S201-B50NA
63 S201-B63NA
2 pole
6 S202-B6
10 S202-B10
13 S202-B13
16 S202-B16
20 S202-B20 A 5 0.250
25 S202-B25
32 S202-B32
40 S202-B40
50 S202-B50
63 S202-B63
pro Mcompact
1.8ABB
AC1645 – 11/07
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
S200
480Y/277VAC
Supplementary Protectors
CUL 1077 CSA C22.2 - NO235
IEC-898/947-2
Cable & equipment protection
Rated Catalog List Delivery Sugg. Wgt. kg
current number price class order (1 pc.)
qty
S201-C16
S202-C16
S203-C16
Rated Catalog List Delivery Sugg. Wgt. kg
current number price class order (1 pc.)
qty
S200
C
Discount schedule DS-S2C
1 pole
0.5 S201-C0.5
1 S201-C1
1.6 S201-C1.6
2 S201-C2
3 S201-C3
4 S201-C4
6 S201-C6
8 S201-C8
10 S201-C10 B 10 0.125
13 S201-C13
16 S201-C16
20 S201-C20
25 S201-C25
32 S201-C32
40 S201-C40
50 S201-C50
63 S201-C63
1 pole + neutral
0.5 S201-C0.5NA
1 S201-C1NA
1.6 S201-C1.6NA
2 S201-C2NA
3 S201-C3NA
4 S201-C4NA
6 S201-C6NA
8 S201-C8NA
10 S201-C10NA C 5 0.250
13 S201-C13NA
16 S201-C16NA
20 S201-C20NA
25 S201-C25NA
32 S201-C32NA
40 S201-C40NA
50 S201-C50NA
63 S201-C63NA
2 pole
0.5 S202-C0.5
1 S202-C1
1.6 S202-C1.6
2 S202-C2
3 S202-C3
4 S202-C4
6 S202-C6
8 S202-C8 B 5 0.250
10 S202-C10
13 S202-C13
16 S202-C16
20 S202-C20
25 S202-C25
32 S202-C32
40 S202-C40
50 S202-C50
63 S202-C63
3 pole
0.5 S203-C0.5
1 S203-C1
1.6 S203-C1.6
2 S203-C2
3 S203-C3
4 S203-C4
6 S203-C6
8 S203-C8 B 1 0.375
10 S203-C10
13 S203-C13
16 S203-C16
20 S203-C20
25 S203-C25
32 S203-C32
40 S203-C40
50 S203-C50
63 S203-C63
3 pole + neutral
0.5 S203-C0.5NA
1 S203-C1NA
1.6 S203-C1.6NA
2 S203-C2NA
3 S203-C3NA
4 S203-C4NA
6 S203-C6NA
8 S203-C8NA B 1 0.500
10 S203-C10NA
13 S203-C13NA
16 S203-C16NA
20 S203-C20NA
25 S203-C25NA
32 S203-C32NA
40 S203-C40NA
50 S203-C50NA
63 S203-C63NA
4 pole
0.5 S204-C0.5
1 S204-C1
1.6 S204-C1.6
2 S204-C2
3 S204-C3
4 S204-C4
6 S204-C6
8 S204-C8 C 1 0.500
10 S204-C10
13 S204-C13
16 S204-C16
20 S204-C20
25 S204-C25
32 S204-C32
40 S204-C40
50 S204-C50
63 S204-C63
pro Mcompact
ABB 1.9
AC 1645 – 11/07
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
S200
480Y/277VAC
Supplementary Protectors
DUL 1077 CSA C22.2 - NO235
IEC-898/947-2
Cable & equipment protection
Rated Catalog List Delivery Sugg. Wgt. kg
current number price class order (1 pc.)
qty
S201-D16
S202-D16
S203-D16
Rated Catalog List Delivery Sugg. Wgt. kg
current number price class order (1 pc.)
qty
S200
D
Discount schedule DS-S2
1 pole
0.5 S201-D0.5
1 S201-D1
1.6 S201-D1.6
2 S201-D2
3 S201-D3
4 S201-D4
6 S201-D6
8 S201-D8
10 S201-D10 B 10 0.125
13 S201-D13
16 S201-D16
20 S201-D20
25 S201-D25
32 S201-D32
40 S201-D40
50 S201-D50
63 S201-D63
1 pole + neutral
0.5 S201-D0.5NA
1 S201-D1NA
1.6 S201-D1.6NA
2 S201-D2NA
3 S201-D3NA
4 S201-D4NA
6 S201-D6NA
8 S201-D8NA
10 S201-D10NA C 5 0.250
13 S201-D13NA
16 S201-D16NA
20 S201-D20NA
25 S201-D25NA
32 S201-D32NA
40 S201-D40NA
50 S201-D50NA
63 S201-D63NA
2 pole
0.5 S202-D0.5
1 S202-D1
1.6 S202-D1.6
2 S202-D2
3 S202-D3
4 S202-D4
6 S202-D6
8 S202-D8 B 5 0.250
10 S202-D10
13 S202-D13
16 S202-D16
20 S202-D20
25 S202-D25
32 S202-D32
40 S202-D40
50 S202-D50
63 S202-D63
3 pole
0.5 S203-D0.5
1 S203-D1
1.6 S203-D1.6
2 S203-D2
3 S203-D3
4 S203-D4
6 S203-D6
8 S203-D8 B 1 0.375
10 S203-D10
13 S203-D13
16 S203-D16
20 S203-D20
25 S203-D25
32 S203-D32
40 S203-D40
50 S203-D50
63 S203-D63
3 pole + neutral
0.5 S203-D0.5NA
1 S203-D1NA
1.6 S203-D1.6NA
2 S203-D2NA
3 S203-D3NA
4 S203-D4NA
6 S203-D6NA
8 S203-D8NA C 1 0.500
10 S203-D10NA
13 S203-D13NA
16 S203-D16NA
20 S203-D20NA
25 S203-D25NA
32 S203-D32NA
40 S203-D40NA
50 S203-D50NA
63 S203-D63NA
4 pole
0.5 S204-D0.5
1 S204-D1
1.6 S204-D1.6
2 S204-D2
3 S204-D3
4 S204-D4
6 S204-D6
8 S204-D8 C 1 0.500
10 S204-D10
13 S204-D13
16 S204-D16
20 S204-D20
25 S204-D25
32 S204-D32
40 S204-D40
50 S204-D50
63 S204-D63
pro Mcompact
1.10 ABB
AC1645 – 11/07
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
KUL 1077 CSA C22.2 - NO235
IEC-947-2
Cable & equipment protection
S200
480Y/277VAC
Supplementary Protectors
S201-K15
Rated Catalog List Delivery Sugg. Wgt. kg
current number price class order (1 pc.)
qty
S202-K15
S203-K15
S200
K
Discount schedule DS-S2
3 pole
0.5 S203-K0.5
1 S203-K1
1.6 S203-K1.6
2 S203-K2
3 S203-K3
4 S203-K4
5 S203-K5
6 S203-K6
8 S203-K8
10 S203-K10 A 1 0.375
13 S203-K13
15 S203-K15
16 S203-K16
20 S203-K20
25 S203-K25
30 S203-K30
32 S203-K32
40 S203-K40
50 S203-K50
60 S203-K60
63 S203-K63
3 pole + neutral
0.5 S203-K0.5NA
1 S203-K1NA
1.6 S203-K1.6NA
2 S203-K2NA
3 S203-K3NA
4 S203-K4NA
6 S203-K6NA
8 S203-K8NA
10 S203-K10NA C 1 0.500
13 S203-K13NA
16 S203-K16NA
20 S203-K20NA
25 S203-K25NA
32 S203-K32NA
40 S203-K40NA
50 S203-K50NA
63 S203-K63NA
4 pole
0.5 S204-K0.5
1 S204-K1
1.6 S204-K1.6
2 S204-K2
3 S204-K3
4 S204-K4
6 S204-K6
8 S204-K8 C 1 0.500
10 S204-K10
13 S204-K13
16 S204-K16
20 S204-K20
25 S204-K25
32 S204-K32
40 S204-K40
50 S204-K50
63 S204-K63
1 pole
0.5 S201-K0.5
1 S201-K1
1.6 S201-K1.6
2 S201-K2
3 S201-K3
4 S201-K4
5 S201-K5
6 S201-K6
8 S201-K8 A 10 0.125
10 S201-K10
13 S201-K13
15 S201-K15
16 S201-K16
20 S201-K20
25 S201-K25
30 S201-K30
32 S201-K32
40 S201-K40
50 S201-K50
60 S201-K60
63 S201-K63
1 pole + neutral
0.5 S201-K0.5NA
1 S201-K1NA
1.6 S201-K1.6NA
2 S201-K2NA
3 S201-K3NA
4 S201-K4NA
6 S201-K6NA
8 S201-K8NA
10 S201-K10NA C 5 0.250
13 S201-K13NA
16 S201-K16NA
20 S201-K20NA
25 S201-K25NA
32 S201-K32NA
40 S201-K40NA
50 S201-K50NA
63 S201-K63NA
2 pole
0.5 S202-K0.5
1 S202-K1
1.6 S202-K1.6
2 S202-K2
3 S202-K3
4 S202-K4
5 S202-K5
6 S202-K6
8 S202-K8
10 S202-K10 A 5 0.250
13 S202-K13
15 S202-K15
16 S202-K16
20 S202-K20
25 S202-K25
30 S202-K30
32 S202-K32
40 S202-K40
50 S202-K50
60 S202-K60
63 S202-K63
Rated Catalog List Delivery Sugg. Wgt. kg
current number price class order (1 pc.)
qty
pro Mcompact
ABB 1.11
AC 1645 – 11/07
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
Rated Catalog List Delivery Sugg. Wgt. kg
current number price class order (1 pc.)
qty
ZUL 1077 CSA C22.2 - NO235
IEC-947-2
Fast trip characteristics
S200
480Y/277VAC
Supplementary Protectors
S201-Z16
Rated Catalog List Delivery Sugg. Wgt. kg
current number price class order (1 pc.)
qty
S202-Z16
S203-Z16
S200
Z
Discount schedule DS-S2
1 pole
0.5 S201-Z0.5
1 S201-Z1
1.6 S201-Z1.6
2 S201-Z2
3 S201-Z3
4 S201-Z4
6 S201-Z6
8 S201-Z8 C 10 0.125
10 S201-Z10
16 S201-Z16
20 S201-Z20
25 S201-Z25
32 S201-Z32
40 S201-Z40
50 S201-Z50
63 S201-Z63
1 pole + neutral
0.5 S201-Z0.5NA
1 S201-Z1NA
1.6 S201-Z1.6NA
2 S201-Z2NA
3 S201-Z3NA
4 S201-Z4NA
6 S201-Z6NA
8 S201-Z8NA
10 S201-Z10NA C 5 0.250
16 S201-Z16NA
20 S201-Z20NA
25 S201-Z25NA
32 S201-Z32NA
40 S201-Z40NA
50 S201-Z50NA
63 S201-Z63NA
2 pole
0.5 S202-Z0.5
1 S202-Z1
1.6 S202-Z1.6
2 S202-Z2
3 S202-Z3
4 S202-Z4
6 S202-Z6
8 S202-Z8
10 S202-Z10 C 5 0.250
16 S202-Z16
20 S202-Z20
25 S202-Z25
32 S202-Z32
40 S202-Z40
50 S202-Z50
63 S202-Z63
3 pole
0.5 S203-Z0.5
1 S203-Z1
1.6 S203-Z1.6
2 S203-Z2
3 S203-Z3
4 S203-Z4
6 S203-Z6
8 S203-Z8 C 1 0.375
10 S203-Z10
16 S203-Z16
20 S203-Z20
25 S203-Z25
32 S203-Z32
40 S203-Z40
50 S203-Z50
63 S203-Z63
3 pole + neutral
0.5 S203-Z0.5NA
1 S203-Z1NA
1.6 S203-Z1.6NA
2 S203-Z2NA
3 S203-Z3NA
4 S203-Z4NA
6 S203-Z6NA
8 S203-Z8NA
10 S203-Z10NA C 1 0.500
16 S203-Z16NA
20 S203-Z20NA
25 S203-Z25NA
32 S203-Z32NA
40 S203-Z40NA
50 S203-Z50NA
63 S203-Z63NA
4 pole
0.5 S204-Z0.5
1 S204-Z1
1.6 S204-Z1.6
2 S204-Z2
3 S204-Z3
4 S204-Z4
6 S204-Z6
8 S204-Z8 C 1 0.500
10 S204-Z10
16 S204-Z16
20 S204-Z20
25 S204-Z25
32 S204-Z32
40 S204-Z40
50 S204-Z50
63 S204-Z63
pro Mcompact
1.12 ABB
AC1645 – 11/07
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
Rated Catalog List Delivery Sugg. Wgt. kg.
current number price class order (1 pc.)
qty
KUL 489 CSA C22.2 - NO5.0
IEC 947-2
Cable & equipment protection
S200U
240VAC
Miniature MCCBs
Rated Catalog List Delivery Sugg. Wgt. kg
current number price class order (1 pc.)
qty
S201U-K15
S202U-K15
S203U-K15
S200U
K
Discount schedule DS-SU
1 pole
0.2 S201U-K0.2
0.3 S201U-K0.3
0.5 S201U-K0.5
0.75 S201U-K0.75
1 S201U-K1
1.6 S201U-K1.6
2 S201U-K2
3 S201U-K3
4 S201U-K4
5 S201U-K5
6 S201U-K6
8 S201U-K8 A 10 0.140
10 S201U-K10
13 S201U-K13
15 S201U-K15
16 S201U-K16
20 S201U-K20
25 S201U-K25
30 S201U-K30
32 S201U-K32
40 S201U-K40
50 S201U-K50
60 S201U-K60
63 S201U-K63
2 pole
0.2 S202U-K0.2
0.3 S202U-K0.3
0.5 S202U-K0.5
0.75 S202U-K0.75
1 S202U-K1
1.6 S202U-K1.6
2 S202U-K2
3 S202U-K3
4 S202U-K4
5 S202U-K5
6 S202U-K6 A 5 0.280
8 S202U-K8
10 S202U-K10
13 S202U-K13
15 S202U-K15
16 S202U-K16
20 S202U-K20
25 S202U-K25
30 S202U-K30
32 S202U-K32
40 S202U-K40
50 S202U-K50
60 S202U-K60
63 S202U-K63
3 pole
0.2 S203U-K0.2
0.3 S203U-K0.3
0.5 S203U-K0.5
0.75 S203U-K0.75
1 S203U-K1
1.6 S203U-K1.6
2 S203U-K2
3 S203U-K3
4 S203U-K4
5 S203U-K5
6 S203U-K6 A 1 0.420
8 S203U-K8
10 S203U-K10
13 S203U-K13
15 S203U-K15
16 S203U-K16
20 S203U-K20
25 S203U-K25
30 S203U-K30
32 S203U-K32
40 S203U-K40
50 S203U-K50
60 S203U-K60
63 S203U-K63
4 pole
0.2 S204U-K0.2
0.3 S204U-K0.3
0.5 S204U-K0.5
0.75 S204U-K0.75
1 S204U-K1
1.6 S204U-K1.6
2 S204U-K2
3 S204U-K3
4 S204U-K4
5 S204U-K5
6 S204U-K6 C 1 0.560
8 S204U-K8
10 S204U-K10
13 S204U-K13
15 S204U-K15
16 S204U-K16
20 S204U-K20
25 S204U-K25
30 S204U-K30
32 S204U-K32
40 S204U-K40
50 S204U-K50
60 S204U-K60
63 S204U-K63
pro Mcompact
ABB 1.13
AC 1645 – 11/07
S200U
Z
ZUL 489 CSA C22.2 NO5.0
IEC 947-2
Cable & equipment protection
Rated Catalog List Delivery Sugg. Wgt. kg
current number price class order (1 pc.)
qty
S201U-Z15
S202U-Z15
S203U-Z15
Rated Catalog List Delivery Sugg. Wgt. kg
current number price class order (1 pc.)
qty
S200U
240VAC
Miniature MCCBs
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
Discount schedule DS-SU
1 pole
0.5 S201U-Z0.5
1 S201U-Z1
1.6 S201U-Z1.6
2 S201U-Z2
3 S201U-Z3
4 S201U-Z4
5 S201U-Z5
6 S201U-Z6
8 S201U-Z8
10 S201U-Z10 B 10 0.140
15 S201U-Z15
16 S201U-Z16
20 S201U-Z20
25 S201U-Z25
30 S201U-Z30
32 S201U-Z32
40 S201U-Z40
50 S201U-Z50
60 S201U-Z60
63 S201U-Z63
2 pole
0.5 S202U-Z0.5
1 S202U-Z1
1.6 S202U-Z1.6
2 S202U-Z2
3 S202U-Z3
4 S202U-Z4
5 S202U-Z5
6 S202U-Z6
8 S202U-Z8
10 S202U-Z10 B 5 0.280
15 S202U-Z15
16 S202U-Z16
20 S202U-Z20
25 S202U-Z25
30 S202U-Z30
32 S202U-Z32
40 S202U-Z40
50 S202U-Z50
60 S202U-Z60
63 S202U-Z63
3 pole
0.5 S203U-Z0.5
1 S203U-Z1
1.6 S203U-Z1.6
2 S203U-Z2
3 S203U-Z3
4 S203U-Z4
5 S203U-Z5
6 S203U-Z6
8 S203U-Z8
10 S203U-Z10 B 1 0.420
15 S203U-Z15
16 S203U-Z16
20 S203U-Z20
25 S203U-Z25
30 S203U-Z30
32 S203U-Z32
40 S203U-Z40
50 S203U-Z50
60 S203U-Z60
63 S203U-Z63
4 pole
0.5 S204U-Z0.5
1 S204U-Z1
1.6 S204U-Z1.6
2 S204U-Z2
3 S204U-Z3
4 S204U-Z4
5 S204U-Z5
6 S204U-Z6
8 S204U-Z8
10 S204U-Z10 C 1 0.500
15 S204U-Z15
16 S204U-Z16
20 S204U-Z20
25 S204U-Z25
30 S204U-Z30
32 S204U-Z32
40 S204U-Z40
50 S204U-Z50
60 S204U-Z60
63 S204U-Z63
pro Mcompact
1.14 ABB
AC1645 – 11/07
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
Rated Part List Delivery Sugg. Wgt. kg
current number price class order (1 pc.)
qty
KUL 489 CSA C22.2 - NO5.0
IEC 947-2
Cable & equipment protection
S200UP
480Y/277VAC
Miniature MCCBs
Rated Part List Delivery Sugg. Wgt. kg
current number price class order (1 pc.)
qty
S201UP-K15
S202UP-K15
S203UP-K15
S200UP
K
Discount schedule DS-SU
1 pole
0.2 S201UP-K0.2
0.3 S201UP-K0.3
0.5 S201UP-K0.5
0.75 S201UP-K0.75
1 S201UP-K1
1.6 S201UP-K1.6
2 S201UP-K2
3 S201UP-K3
4 S201UP-K4 A 10 0.140
5 S201UP-K5
6 S201UP-K6
8 S201UP-K8
10 S201UP-K10
13 S201UP-K13
15 S201UP-K15
16 S201UP-K16
20 S201UP-K20
25 S201UP-K25
2 pole
0.2 S202UP-K0.2
0.3 S202UP-K0.3
0.5 S202UP-K0.5
0.75 S202UP-K0.75
1 S202UP-K1
1.6 S202UP-K1.6
2 S202UP-K2
3 S202UP-K3
4 S202UP-K4 A 5 0.280
5 S202UP-K5
6 S202UP-K6
8 S202UP-K8
10 S202UP-K10
13 S202UP-K13
15 S202UP-K15
16 S202UP-K16
20 S202UP-K20
25 S202UP-K25
3 pole
0.2 S203UP-K0.2
0.3 S203UP-K0.3
0.5 S203UP-K0.5
0.75 S203UP-K0.75
1 S203UP-K1
1.6 S203UP-K1.6
2 S203UP-K2
3 S203UP-K3
4 S203UP-K4 A 1 0.420
5 S203UP-K5
6 S203UP-K6
8 S203UP-K8
10 S203UP-K10
13 S203UP-K13
15 S203UP-K15
16 S203UP-K16
20 S203UP-K20
25 S203UP-K25
4 pole
0.2 S204UP-K0.2
0.3 S204UP-K0.3
0.5 S204UP-K0.5
0.75 S204UP-K0.75
1 S204UP-K1
1.6 S204UP-K1.6
2 S204UP-K2
3 S204UP-K3
4 S204UP-K4 C 1 0.560
5 S204UP-K5
6 S204UP-K6
8 S204UP-K8
10 S204UP-K10
13 S204UP-K13
15 S204UP-K15
16 S204UP-K16
20 S204UP-K20
25 S204UP-K25
pro Mcompact
ABB 1.15
AC 1645 – 11/07
S201UP-Z15
S202UP-Z15
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
Rated Part List Delivery Sugg. Wgt. kg
current number price class order (1 pc.)
qty
ZUL 489 CSA C22.2 - NO5.0
IEC 947-22
Cable & equipment protection
S200UP
480Y/277VAC
Miniature MCCBs
Rated Part List Delivery Sugg. Wgt. kg
current number price class order (1 pc.)
qty
S204UP-Z15
S200UP
Z
Discount schedule DS-SU
1 pole
0.5 S201UP-Z0.5
1 S201UP-Z1
1.6 S201UP-Z1.6
2 S201UP-Z2
3 S201UP-Z3
4 S201UP-Z4
5 S201UP-Z5
6 S201UP-Z6 B 10 0.140
8 S201UP-Z8
10 S201UP-Z10
13 S201UP-Z13
15 S201UP-Z15
16 S201UP-Z16
20 S201UP-Z20
25 S201UP-Z25
2 pole
0.5 S202UP-Z0.5
1 S202UP-Z1
1.6 S202UP-Z1.6
2 S202UP-Z2
3 S202UP-Z3
4 S202UP-Z4
5 S202UP-Z5
6 S202UP-Z6 B 5 0.280
8 S202UP-Z8
10 S202UP-Z10
13 S202UP-Z13
15 S202UP-Z15
16 S202UP-Z16
20 S202UP-Z20
25 S202UP-Z25
3 pole
0.5 S203UP-Z0.5
1 S203UP-Z1
1.6 S203UP-Z1.6
2 S203UP-Z2
3 S203UP-Z3
4 S203UP-Z4
5 S203UP-Z5
6 S203UP-Z6 B 1 0.420
8 S203UP-Z8
10 S203UP-Z10
13 S203UP-Z13
15 S203UP-Z15
16 S203UP-Z16
20 S203UP-Z20
25 S203UP-Z25
4 pole
0.5 S204UP-Z0.5
1 S204UP-Z1
1.6 S204UP-Z1.6
2 S204UP-Z2
3 S204UP-Z3
4 S204UP-Z4
5 S204UP-Z5
6 S204UP-Z6 B 1 0.560
8 S204UP-Z8
10 S204UP-Z10
13 S204UP-Z13
15 S204UP-Z15
16 S204UP-Z16
20 S204UP-Z20
25 S204UP-Z25
L1....
L1 L2 L1 L2....
L1 L2 L3 L4 L1 L2 L3 L4....
L1 L2 L3 L1 L2 L3....
L1 L2 L3
L1 L2
L1
L1
L2 L3
L4
1 Phase
2 Phase
3 Phase
4 Phase
Amp Number Busbar End cap Catalog List Delivery Suggested Weight
rating of length catalog number price class order qty. kg
poles number quantity (1 pc.)
For use
on:
63 60 1053 PS-END0 PS1/60 B 1 0.260
80 60 1053 PS-END0 PS1/60/16 0.410
6 103 – PS1/6/16BP 0.040
80 12 206 – PS1/12/16BP B 1 0.082
18 310 – PS1/18/16BP 0.122
S200
S200U &
S200UP
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
NOTE
ALL BUSBARS MAY BE CENTER FED IN ORDER
TO DOUBLE THE AMPACITY RATING
(TERMINAL LIMITS: S200=1104, S200U/UP=140A)
NOTE
BUSBARS MAY BE USED ON LINE OR LOAD
OF MCBS
pro Mcompact
1.16 ABB
AC1645 – 11/07
Accessories
Busbars (UL and IEC approved only)
S200, S200U and S200UP
Amp Number Busbar End cap Catalog List Delivery Suggested Weight
rating of length catalog number price class order qty. kg
poles number quantity (1 pc.)
For use
on:
63 58 1019 PS-END PS2/58SP B 1 0.312
80 58 1019 PS-END PS2/58/16SP 0.510
6 103 – PS2/6/16BP 0.051
80 12 206 – PS2/12/16BP B 1 0.105
18 310 – PS2/18/16BP 0.159
S200
S200U &
S200UP
Amp Number Busbar End cap Catalog List Delivery Suggested Weight
rating of length catalog number price class order qty. kg
poles number quantity (1 pc.)
For use
on:
63 60 1055 PS-END PS3/60SP B 1 0.340
80 60 1055 PS-END PS3/60/16SP 0.567
6 103 – PS3/6/16BP 0.057
80 12 206 – PS3/12/16BP B 1 0.114
18 310 – PS3/18/16BP 0.170
S200
S200U &
S200UP
Amp Number Busbar End cap Catalog List Delivery Suggested Weight
rating of length catalog number price class order qty. kg
poles number quantity (1 pc.)
For use
on:
80 60 1056 PS-END1 PS4/60/16SP B 1 0.624S200
Discount schedule DS-S2A
pro Mcompact
ABB 1.17
AC 1645 – 11/07
Accessories
Busbars (UL and IEC approved only)
S200
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
Amp Number Busbar End cap Catalog List Delivery Suggested Weight
rating of length catalog number price class order qty. kg
poles number quantity (1 pc.)
For use
on:
63 38 1053 PS-END0 PS1/38H B 1 0.210
80 38 1053 PS-END0 PS1/38/16H 0.286
S200
Amp Number Busbar End cap Catalog List Delivery Suggested Weight
rating of length catalog number price class order qty. kg
poles number quantity (1 pc.)
For use
on:
80 48 1046 PS-END PS2/48/16SP B 1 0.661S200
Amp Number Busbar End cap Catalog List Delivery Suggested Weight
rating of length catalog number price class order qty. kg
poles number quantity (1 pc.)
For use
on:
80 48 1020 PS-END PS3/48/16SP B 1 0.641S200
Amp Number Busbar End cap Catalog List Delivery Suggested Weight
rating of length catalog number price class order qty. kg
poles number quantity (1 pc.)
For use
on:
80 52 1019 PS-END1 PS4/52/16SP B 1 0.873S200
Discount schedule DS-S2A
NOTE
ALL BUSBARS MAY BE CENTER FED IN ORDER
TO DOUBLE THE AMPACITY RATING
(TERMINAL LIMITS: S200=1104, S200U/UP=140A)
NOTE
BUSBARS MAY BE USED ON LINE OR LOAD
OF MCBS
pro Mcompact
1.18 ABB
AC1645 – 11/07
Accessories
Busbars (UL and IEC approved only)
S200, S200U and S200UP
SZ-BSK
SZ-ESK2
SZ-AST55I
SZ-AST50I
Description Catalog List Delivery Suggested Weight kg
number price class order qty qty (1 pc.)
Busbar end caps 1 phase PS-END0
2 & 3 phase PS-END A 10 0.001
4 phase PS-END1
Busbar tooth covers (5 pcs) SZ-BSK A 10 0.024
(shrouds unused portion of busbar)
Busbar mounted terminal block,
1 pole, for use on all busbars, SZ-ESK2 A 1 0.003
wire size: 14 AWG to 2 AWG (IEC only)
Cross section For use on: Catalog List Delivery Suggested Weight kg
AWG / mm2number price class order qty qty (1 pc.)
1/0 (50mm2) Straight S200 SZ-AST55I B10 0.014
1/0 (50mm2) 90OSZ-AST50I 10 0.014
1/0 (50mm2) Straight S200U & SZ-AST55U B10 0.014
1/0 (50mm2) 90OS200UP SZ-AST50U 10 0.014
Ring tongue S200U & SZ-AST55UP B 10
S200UP
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
Discount schedule DS-S2A
ABB 1.19
AC 1645 – 11/07
Accessories
S200, S200U and S200UP
S2C-H6R
S2C-A1
S2C-H10
S2C-UA12DC
S2C-H6RU
Auxiliary contacts
For field mounting right side: S200 S2C-H6R
1 form ‘’C’’ contact S200U & S2C-H6RU A 1 0.04
S200UP
For field mounting below:
1 N.O. S200 S2C-H10 A 15 0.02
1 N.C. S200 S2C-H01
The auxiliary contacts will signal whether the breaker is in the ON or OFF position. Wire size: 18 AWG to 14 AWG.
Bell alarm or auxiliary contacts (universal)
For field mounting right side:
1 form ‘’C’’ contact S200 S2C-S/H6R
S200U & S2C-S6RU A 1 0.04
S200UP
The bell alarm includes a set of contacts that will only signal when the breaker has tripped. Typically the contacts would be connected to an alarm or
bell to signal the operator that an overcurrent trip has occured. The bell alarm also includes a test button for testing the alarm contacts without open-
ing the breaker. Wire size: 18 AWG to 16 AWG.
Shunt Trip
For field mounting right side:
A1-12-60VAC (12-60VDC) S200 S2C-A1
A2-110-415VAC (110-250VDC) S2C-A2 A 1 0.150
S200U & S2C-A1U
S200UP S2C-A2U
For remote tripping of breaker, a shunt trip device can be added to the MCB. The solenoid device opens the breaker after control voltage is applied,
Shunt trips are available for on control system voltage (12-415VAC-VDC).
Undervoltage release
For field mounting:
12VDC S2C-UA12DC
24VAC S2C-UA24AC
24VDC S2C-UA24DC
48VAC S2C-UA48AC
48VDC S200 S2C-UA48DC B 1 0.09
110VAC S2C-UA110AC
110VDC S2C-UA110DC
230VAC S2C-UA230AC
230VDC S2C-UA230DC
400VAC S2C-UA400AC
When control voltage drops below approximately 50% of rated voltage, the UVR opens the breaker. The breaker can not be operated unless proper
control voltage is first applied to the UVR coil. Similar in size and mounting to the shunt trip accessory.
Factory mounting
All accessories can be easily mounted in the field. For factory mounting of any accessory devices, add $50 list to total price per
breaker. To create complete catalog number, take suffix of accessory device following «S2C-» and add suffix to end of breaker
part number. Multiple suffixesmust be added in alphabetical order.
Example: S202-K20A1 $ 240 (2 pole, 20A breaker with type A1 shunt trip) S202-K20 @ $82 + S2C-A1
S202-K20A2H6R $ 268 (2 pole, 20A breaker eith type A2 shunt trip and H6R aux. contacts)
S202-K20 @ $82 + S2C-A1 @ $108 + S2C-H6R @ $28 + factory mounting @ $50 = $260
Auxiliary contacts and shunt trips may be mounted in combination.
Auxiliary contacts
Rating
Rated current: 10A
Min. voltage: 24VAC/VDC
Mechanical life: 10,000 operations
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
Discount schedule DS-S2A
pro Mcompact
Electrical For use Catalog List Delivery Sugg. Wgt. kg
accessories on: number price class order qty (1 pc.)
pro Mcompact
1.20 ABB
AC1645 – 11/07
Accessories
S200
Electrical Catalog List Delivery Suggested Wgt. kg
accessories number price class order quantities (1 pc.)
S2C-DH
SA2
SA1
MB-3PD
MB-CL
S500-ME2
Front mounting kit
For 2 poles S500-ME1 0.060
For 2 – 5 poles S500-ME2 A1
0.082
For 2 – 10 poles S500-ME3 0.102
Includes flange, mounting rail and hardware.
Front mounting clip
For 1 – 4 poles MB-CL B 1 0.057
Simple mounting clip for up to four module mounting.
Front mounting bracket
For 1 – 2 poles MB-2PD B 1 0.071
For 1 – 3 poles MB-3PD
For flush mounting of three pole MCBs: includes hardware.
Locking device
Adaptor only SA1 A10
—
Padlock only w/ 2 keys SA2 —
Allows breaker to be locked in ON or OFF position.
Labeling accessory
1 sheet = 40 blank labels BS
1 sheet = 40 numbered labels BS/40 A1—
Enclosure, IP55 (IEC only)
For 4 modules 12644 0.230
For 6 modules 12646 B1
0.307
For 10 modules 12650 0.581
For 20 modules 12652 1.162
Molded plastic complete with mounting rail and knock-outs for cable entries.
Blanking plates
Single pole (set of 10) BP-1P B 1 —
Rotary mechanism
S2C-DH A 1 0.261
For use with 2, 3 and 4 pole S2 MCBs and disconnect switch selector handles with 5mm shaft.
Discount schedule DS-S2A
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
pro Mcompact
ABB 1.21
AC 1645 – 11/07
Technical data
S200
Approvals:
UL 1077 1077 1077 1077
CSA C22.2 — No. 235 C22.2 — No. 235 C22.2 — No. 235 C22.2 — No. 235
IEC/EN 60898, 60947-2 60898, 60947-2 60947-2 60947-2
No. of poles: 1, 2, 3, 4, 1+N, 3+N 1, 2, 3, 4, 1+N, 3+N 1, 2, 3, 4, 1+N, 3+N 1, 2, 3, 4, 1+N, 3+N
Tripping characteristic: B C, D K Z
Rated currents: 6 to 63A 0.5 to 63A 0.5 to 63A 0.5 to 63A
Minimum operating voltage: 12V 12V 12V 12V
UL/CSA rated voltage & Single pole
Multi pole
Single pole
Multi pole Single pole
Multi pole Single pole Multi pole
interrupting capacity
120VAC 10kA —10kA —10kA —6kA —
240VAC 6kA 10kA 6kA 10kA 6kA 10kA 6kA 6kA
277VAC 6kA —6kA —6kA —6kA —
480Y / 277VAC —6kA —6kA —6kA —6kA
60VDC 10kA 10kA 10kA 10kA 10kA 10kA 10kA 10kA
125VDC —10kA —10kA — 10kA 10kA 10kA
Frequency: 50/60Hz (see below) 50/60 Hz (see below) 50/60Hz (see below) 50/60Hz (see below)
Rated voltage
IEC single pole 230VAC 230VAC 230VAC 230VAC
60VDC 60VDC 60VDC 60VDC
IEC multi-pole 400VAC 400VAC 400VAC 400VAC
125VDC 125VDC 125VDC 125VDC
Protection category: IP20 IP20 IP20 IP20
Depth of unit per DIN 43880: 68mm 68mm 68mm 68mm
Mounting position: optional optional optional optional
Standard mounting: 35mm DIN rail 35mm DIN rail 35mm DIN rail 35mm DIN-rail
Main & shunt trip terminals:
Wire size 0.75 – 25mm20.75 – 25mm20.75 – 25mm20.75 – 25mm2
Torque 2.8Nm 2.8Nm 2.8Nm 2.8Nm
Accessory terminals 0.75 – 2.5mm20.75 – 2.5mm20.75 – 2.5mm20.75 – 2.5mm2
Tool #1 Posidrive #1 Posidrive #1 Posidrive #1 Posidrive
Service life at rated load: In<32A, 20,000 operations In<32A, 20,000 operations In<32A, 20,000 operations In<32A, 20,000 operations
In>32A, 10,000 operations In>32A, 10,000 operations In>32A, 10,000 operations In>32A, 10,000 operations
Ambient temperatures: -25°C to +55°C -25°C to +55°C -25°C to +55°C -25°C to +55°C
Storage temperatures: -40°C to +70°C -40°C to +70°C -40°C to +70°C -40°C to +70°C
Shock resistance: 30g minimum of 2 impacts, 30g minimum of 2 impacts, 30g minimum of 2 impacts, 30g minimum of 2 impacts,
shock duration of 13ms shock duration of 13ms shock duration of 13ms shock duration of 13ms
Vibration resistance: 5g, 20 cycles, 5 Hz, 150 Hz 5g, 20 cycles, 5 Hz, 150 Hz 5g, 20 cycles, 5 Hz, 150 Hz 5g, 20 cycles, 5 Hz, 150 Hz
@ 0.8 - In@ 0.8 - In@ 0.8 - In@ 0.8 - In
Trip indication No No No No
Item S200 - B S200 - C, D S200 - K S200 - Z
Influence of frequency on electro-magnetic trips
Magnetic trip values shown on trip curves are validfor 50/60Hz applications. For frequencies other
than 50/60Hz, the magnetic (instaneous) trip values are increase by th e factor given below.
16-2/3 to 60Hz 100Hz 200Hz 400Hz DC
Approx. factor 1 1.1 1.2 1.5 1.5
Thermanl trippingis independent of frequency.
pro Mcompact
1.22 ABB
AC1645 – 11/07
Technical data
S200U, S200UP
Approvals:
UL 489 489
CSA C22.2 — No. 5.0 C22.2 — No. 5.0
IEC/EN 60947-2 60947-2
No. of poles: 1, 2 ,3 ,4 1, 2, 3, 4
Tripping characteristic: K, Z K, Z
Rated currents: 0.2 to 63A 0.2 to 25A
Minimum operating voltage: 12V 12V
UL/CSA rated voltage & Single pole Multi pole Single pole Multi pole
interrupting capacity
120VAC 10kA — — —
240VAC 10kA 10kA — —
277VAC — — 10kA —
480Y/ 277VAC — — — 10kA
Frequency: 50/60Hz 50/60Hz
Rated voltage
IEC single pole 230VAC 230VAC
60VDC 60VDC
IEC multi-pole 400VAC 400VAC
125VDC 125VDC
Protection category: IP20 IP20
Depth of unit per DIN 43880: 68mm 68mm
Mounting position: optional optional
Standard mounting: 35mm DIN rail 35mm DIN rail
Main terminals: 0.75 – 25mm20.75 – 25mm2
Wire size (18 - 4 AWG) (18 - 4 AWG)
Torque 2.8Nm 2.8Nm
Service life at rated load: 20,000 operations 20,000 operations
Ambient temperatures: -25°C to +55°C -25°C to +55°C
Shock resistance: 30g minimum of 20 impacts, 10g minimum of 20 impacts,
shock duration of 13ms shock duration of 13ms
Vibration resistance: 5g, 20 cycles, 5 Hz, 150 Hz 5g, 20 cycles, 5 Hz, 150 Hz
@ 0.8 - In@ 0.8 - In
Trip indicator Yes Yes
Item S200U S200UP
pro Mcompact
ABB 1.23
AC 1645 – 11/07
Technical data
Terminal marking and accessories mounting
S201 S202 S203 S204 S201 Na S203 Na
11
12 14 2 12 14 2 12 14 2
111 1111
S2C-H6R
S2C-H11L S2C-H20L S2C-H02L S2C-H10 S2C-H01
Automatic
opening Manual
opening
95
96 98 2 96 98 2 96 98 2
195 9511
S2C-S/H6R Automatic
opening Manual
opening
14 22 2
13 21 1
12 22 2
11 21 1
14 24 2
13 23 1 13
14
11
12
Terminal data
Input optional from top or bottom
Possible mounting arrangements of MCB accessories
pro Mcompact
1.24 ABB
AC1645 – 11/07
Technical data
Busbars & connectors
Connection methods
Dual function terminals provid-
ed in open position for connec-
tion to busbars or cable.
Terminals allow for connection
of cable 18-4 AWG.
Two slots per terminal offer the
ability to connect, independent-
ly, two conductors.
Top and bottom terminals can
be bussed together with single
phase or multi-phase busbars
as shown. Both line and load
side terminals can be busbar
connected.
Easy removal of devices from
an assembly when using busbar
in the bottom, load side
terminals. Supplementary
protectors only.
Conductors can only be inserted
into open terminals, preventing
mis-wiring and potential prob-
lems.
pro Mcompact
ABB 1.25
AC 1645 – 11/07
Approximate dimension
S200, S200U, S200UP
S200
S200U
S200UP
69
44
17.5 35 52.5 70
17.5
69
49
6.8
45
100
45
88
17.5
22
6.8
17.5
22
35 52.5 70
mm
mm
mm
pro Mcompact
1.26 ABB
AC1645 – 11/07
Approximate dimension
Accessories S200
MB-CL
S2C-H10
S2C-H01
S2C-A/UA
S2C-S/H6R
MB-3PD
mm
mm
mm
pro Mcompact
ABB 1.27
AC 1645 – 11/07
Approximate dimension
Accessories S200
12644
12646
12650
12652
S2C-DH
mm
pro Mcompact
1.28 ABB
AC1645 – 11/07
Cross-reference
Older Suggested Physical Electrical
version replacement comparison comparison
series
S260B S200B Same pole spacing Same trip characteristic
S260C S200C Same pole spacing Same trip characteristic
S260D S200D Same pole spacing Same trip characteristic
S270K S200K Same pole spacing Same trip characteristic
S280K S200K Same pole spacing Same trip characteristic except 6kA IC
S280Z S200Z Same pole spacing Same trip characteristic except 6kA IC
Many older styles of ABB miniature circuit breakers have been replaced by new and improved versions. Many of these newer styles can
be directly interchanged, both electrically and physically, with the older version. There are also many international styles of ABB circuit
breakers which are not normal stock items and may be interchanged with stocked ABB versions.
pro M
Description
The S2 series of miniature circuit breakers
offer a compact solution to protection
requirements. The breakers are recognized
under standard UL 1077 and CSA C22.2
NO235 as supplemental devices. The S2
devices are current limiting, DIN rail mount-
ed and can offer a good equivalent to fused
systems.
The S2 is available with application-specific
trip characteristics to provide maximum
circuit protection. The breakers offer
thermal-magnetic trip protection according
to K and Z characteristics.
For the worldwide market, the breakers carry
UL, CSA, IEC, CE and many other agency
approvals and certifications.
pro M
Supplementary Protectors
S280, S220, S290
Features
• Current limiting
• Fast breaking time (2.5 – 3.5 msec)
• Unique bus connection system
• Wide range of accessories
• Available with variable depth handle
mechanism
• Optional Z curve for SCR protection
• CE certified and marked
• DIN rail or front plated mounting
• Finger safe terminals
• Multi-function terminals
• Suitable for reverse feed
• UL 1077 and CSA C22.2 NO235
• 480Y/277VAC, 600Y/347VAC
and 500VDC versions
ABB 2.1
AC1645 – 11/07
pro M
General information
Interrupting ratings
Trip characteristics overview & tripping curves
Z
1 2 3 5 10 20 30
0.01
0.1
10
100
1000
10,000
1
0.05
0.5
50
500
5000
5
AC
DC
seconds
multiple of rated current
UC-Z
1 2 3 5 10 20 30
0.01
0.1
10
100
1000
10,000
1
0.05
0.5
50
500
5000
5
DC
seconds
multiple of rated current
1 2 3 5 10 20 30
UC-K
0.01
0.1
10
100
1000
10,000
1
0.05
0.5
50
500
5000
5
DC
seconds
multiple of rated current
120VAC 18kA 32 - 63A S500-B,C,D Single pole
26 - 45A S500-K
30kA 6 - 25A S500-B,C,D
0.15 - 25A S500-K
240VAC 18kA 32 - 63A S500-B,D
26 - 45A S500-K
30kA 6 - 25A S500-B,C,D
0.15 - 25A S500-K
277VAC 6kA 50 - 63A S280-K,Z Single pole
10kA 0.2 - 40A S280-K,Z Single pole
480Y/277VAC 6kA 40 - 63A S280-K,Z Multi pole
10kA 0.2 - 32A S280-K,Z Multi pole
347VAC 3kA 0.2 - 63A S220-K Single pole
600Y/347VAC 3kA 0.2 - 63A S220-K Multi pole
125VDC 10kA 0.2 - 63A S280UC-K,Z Single pole
250VDC 4.5kA 0.2 - 63A S280UC-K,Z Single pole
500VDC 4.5kA 0.2 - 63A S280UC-K,Z Multi pole
Voltage Rated interrupting Rated MCB Comment
capacity current type
Trip characteristics overview
B3-5X 1.25X S500
C 5 - 10X 1.25X S290, S500
D 10 - 20X 1.25X S500
K 8 - 12X 1.05X S280, S500
Z 2 - 3X 1.05X S280
Curve Magnetic Thermal Series
characteristic 1characteristic
1All values are relative to MCB's ampere rating.
Interrupting ratings
Tripping curves
2.2ABB
AC1645 – 11/07
pro M
General information
Construction details (S280 shown)
Space for
identification
marker
Tripping lever
Trip indicator
Operator
Operating
mechanism
Electro-magnetic protection
Thermal protection-bimetal
Upper terminal
Fixed contact
Moving contact
Lower terminal
DIN rail holder
Arc chamber
ABB 2.3
AC1645 – 11/07
pro M
S280 (W) - for use with ring tongue terminal connectors
480Y/277VAC
Supplementary Protectors
Rated Catalog List Delivery Sugg. Wgt. kg
current number price class order (1 pc.)
qty
KUL 1077
CSA C22.2 - NO235
Cable & equipment protection
S281-K16W
S282-K1W
S283-K63W
For use with ring tongue or cable terminals only. Cannot be used with busbar system.
2No charge when ordered with the S280(W).
Rated Catalog List Delivery Sugg. Wgt. kg
current number price class order (1 pc.)
qty
PKG of 20 screws S2-SCR No
charge
Catalog List
Item number price 2
Screws (must be ordered separately)
S280(W)
K
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
1 pole
0.2 S281-K0.2W $ 52
0.3 S281-K0.3W 52
0.5 S281-K0.5W 52
0.75 S281-K0.75W 52
1 S281-K1W 52
1.6 S281-K1.6W 52
2 S281-K2W 52
3 S281-K3W 52
4 S281-K4W 52
6 S281-K6W 52
8 S281-K8W 52 C100.125
10 S281-K10W 52
13 S281-K13W 52
16 S281-K16W 52
20 S281-K20W 52
25 S281-K25W 54
32 S281-K32W 56
40 S281-K40W 62
50 S281-K50W 68
63 S281-K63W 76
2 pole
0.2 S282-K0.2W $ 123
0.3 S282-K0.3W 123
0.5 S282-K0.5W 123
0.75 S282-K0.75W 123
1 S282-K1W 123
1.6 S282-K1.6W 123
2 S282-K2W 123
3 S282-K3W 123
4 S282-K4W 123
6 S282-K6W 123 C50.250
8 S282-K8W 123
10 S282-K10W 123
13 S282-K13W 123
16 S282-K16W 123
20 S282-K20W 123
25 S282-K25W 125
32 S282-K32W 129
40 S282-K40W 142
50 S282-K50W 156
63 S282-K63W 176
3 pole
0.2 S283-K0.2W $ 186
0.3 S283-K0.3W 186
0.5 S283-K0.5W 186
0.75 S283-K0.75W 186
1S283-K1W 186
1.6 S283-K1.6W 186
2S283-K2W 186
3S283-K3W 186
4S283-K4W 186
6S283-K6W 186 C30.375
8S283-K8W 186
10 S283-K10W 186
13 S283-K13W 186
16 S283-K16W 186
20 S283-K20W 186
25 S283-K25W 190
32 S283-K32W 193
40 S283-K40W 206
50 S283-K50W 237
63 S283-K63W 270
2.4ABB
AC1645 – 11/07
Discount schedule DS-CB
pro M
KUL 1077
CSA 22.2 NO235
Cable and Equipment Protection
Rated Catalog List Delivery Sugg. Wgt. kg
current number price class order (1 pc.)
qty
1 pole
0.2 S281UC-K0.2 $ 100
0.3 S281UC-K0.3 100
0.5 S281UC-K0.5 100
0.75 S281UC-K0.75 100
1 S281UC-K1 100
1.6 S281UC-K1.6 100
2 S281UC-K2 100
3 S281UC-K3 100
4 S281UC-K4 100
6 S281UC-K6 100 C100.125
8 S281UC-K8 100
10 S281UC-K10 100
16 S281UC-K16 100
20 S281UC-K20 100
25 S281UC-K25 105
32 S281UC-K32 106
40 S281UC-K40 112
50 S281UC-K50 131
63 S281UC-K63 146
2 pole
0.2 S282UC-K0.2 $ 232
0.3 S282UC-K0.3 232
0.5 S282UC-K0.5 232
0.75 S282UC-K0.75 232
1 S282UC-K1 232
1.6 S282UC-K1.6 232
2 S282UC-K2 232
3 S282UC-K3 232
4 S282UC-K4 232 C50.250
6 S282UC-K6 232
8 S282UC-K8 232
10 S282UC-K10 232
16 S282UC-K16 232
20 S282UC-K20 232
25 S282UC-K25 239
32 S282UC-K32 246
40 S282UC-K40 256
50 S282UC-K50 300
63 S282UC-K63 336
Rated Catalog List Delivery Sugg. Wgt. kg
current number price class order (1 pc.)
qty
3 pole
0.2 S283UC-K0.2 $ 342
0.3 S283UC-K0.3 342
0.5 S283UC-K0.5 342
0.75 S283UC-K0.75 342
1 S283UC-K1 342
1.6 S283UC-K1.6 342
2 S283UC-K2 342
3 S283UC-K3 342
4 S283UC-K4 342 C30.375
6 S283UC-K6 342
8 S283UC-K8 342
10 S283UC-K10 342
16 S283UC-K16 342
20 S283UC-K20 342
25 S283UC-K25 354
32 S283UC-K32 362
40 S283UC-K40 378
50 S283UC-K50 451
63 S283UC-K63 492
S281UC-K25
S282UC-K8
Direct current applications
The S280UC differs from standard miniature circuit breakers in that the UC versions include a permanent
magnet which aids in the extinguishing of the arc during medium and high level faults. It is necessary to
observe the correct polarity and current direction when connecting the UC breakers. Two examples of
correct connection are shown below.
Termination points are marked on all UC type MCBs, points one (1) and four (4) are negative and points two (2)
and three (3) are positive. Four pole breakers are also available for voltage reversal applications.
Maximum voltage between leads
CDV005CDV052
eloP owTeloP elgniS
CU282SCU182S
S283UC-K16
S280UC
500 VDC - 480Y/277VAC
L- L+
-1
+2
- +
LOAD
L- L+
-1
+2
- +
LOAD
3+
4-
S280UC
K
1 2 3 5 10 20 30
UC-K
0.01
0.1
10
100
1000
10,000
1
0.05
0.5
50
500
5000
5
DC
seconds
multiple of rated current
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
Supplementary Protectors
ABB 2.5
AC1645 – 11/07
Discount schedule DS-CB
pro M
ZUL 1077
CSA 22.2 NO235
Fast trip characteristic
Rated Catalog List Delivery Sugg. Wgt. kg
current number price class order (1 pc.)
qty
S280UC
500VDC - 480Y/277VAC
Supplementary Protectors
1 pole
0.5 S281UC-Z0.5 $ 162
1 S281UC-Z1 162
1.6 S281UC-Z1.6 162
2 S281UC-Z2 162
3 S281UC-Z3 162
4 S281UC-Z4 162
6 S281UC-Z6 162
8 S281UC-Z8 162
10 S281UC-Z10 162 C100.125
16 S281UC-Z16 162
20 S281UC-Z20 162
25 S281UC-Z25 163
32 S281UC-Z32 169
40 S281UC-Z40 182
50 S281UC-Z50 208
63 S281UC-Z63 233
2 pole
0.5 S282UC-Z0.5 $ 376
1 S282UC-Z1 376
1.6 S282UC-Z1.6 376
2 S282UC-Z2 376
3 S282UC-Z3 376
4 S282UC-Z4 376
6 S282UC-Z6 376
8 S282UC-Z8 376 C50.250
10 S282UC-Z10 376
16 S282UC-Z16 376
20 S282UC-Z20 376
25 S282UC-Z25 383
32 S282UC-Z32 394
40 S282UC-Z40 410
50 S282UC-Z50 479
63 S282UC-Z63 537
3 pole
0.5 S283UC-Z0.5 $ 548
1 S283UC-Z1 548
1.6 S283UC-Z1.6 548
2 S283UC-Z2 548
3 S283UC-Z3 548
4 S283UC-Z4 548
6 S283UC-Z6 548
8 S283UC-Z8 548 C30.375
10 S283UC-Z10 548
16 S283UC-Z16 548
20 S283UC-Z20 548
25 S283UC-Z25 556
32 S283UC-Z32 573
40 S283UC-Z40 592
50 S283UC-Z50 697
63 S283UC-Z63 780
500 VDC Class
S280 (UC) Z
UC-Z
1 2 3 5 10 20 30
0.01
0.1
10
100
1000
10,000
1
0.05
0.5
50
500
5000
5
DC
seconds
multiple of rated current
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
2.6ABB
AC1645 – 11/07
Discount schedule DS-CB
S281UC-Z16
S282UC-Z32
S283UC-Z32
pro M
CIEC 898
Cable and equipment protection
Rated Catalog List Delivery Sugg. Wgt. oz.
current number price class order (1 pc.)
qty
S290
400/230VAC
1 pole
80 S291-C80 $ 230
100 S291-C100 246 C6 9.2
125 S291-C125 329
2 pole
80 S292-C80 $ 600
100 S292-C100 638 C 3 18.4
125 S292-C125 998
3 pole
80 S293-C80 $ 940
100 S293-C100 968 C 2 27.6
125 S293-C125 1288
4 pole
80 S294-C80 $ 1233
100 S294-C100 1297 C 1 36.8
125 S294-C125 1700
Auxiliary contact
S290-H11 $ 57 C1 1.75
Bell alarm
S290-S $ 88 C1 1.75
Shunt trip
S290-A1 $ 116 C1 6.2
For field mounting, left side, 110V – 415VAC
S290-A2 $ 116 C1 6.2
For field mounting, left side, 24 – 48VDC
400VAC Class
S290
C
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
pro M
CIEC 898
Cable and equipment protection
Rated Catalog List Delivery Sugg. Wgt. oz.
current number price class order (1 pc.)
qty
S290
400/230VAC
1 pole
80 S291-C80 $ 230
100 S291-C100 246 C6 9.2
125 S291-C125 329
2 pole
80 S292-C80 $ 600
100 S292-C100 638 C 3 18.4
125 S292-C125 998
3 pole
80 S293-C80 $ 940
100 S293-C100 968 C 2 27.6
125 S293-C125 1288
4 pole
80 S294-C80 $ 1233
100 S294-C100 1297 C 1 36.8
125 S294-C125 1700
Auxiliary contact
S290-H11 $ 57 C1 1.75
Bell alarm
S290-S $ 88 C1 1.75
Shunt trip
S290-A1 $ 116 C1 6.2
For field mounting, left side, 110V – 415VAC
S290-A2 $ 116 C1 6.2
For field mounting, left side, 24 – 48VDC
400VAC Class
S290
C
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
ABB 2.7
AC1645 – 11/07
Discount schedule DS-CB
S291-C80
S290-H11
pro M
S220
600Y/347VAC
Supplementary Protectors
Rated Catalog List Delivery Sugg. Wgt. kg
current number price class order (1 pc.)
qty
KUL 1077
CSA C22.2 - NO235
Cable & equipment protection
Rated Catalog List Delivery Sugg. Wgt. kg
current number price class order (1 pc.)
qty
S220-H11 $ 40 A100.05
Auxiliary Contacts 1NO / 1NC
For field mounting. Can be modified to 2 NO or 2NC
S220
K
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
S223-K20
S221-K10
S222-K10
0.2
0.3
0.5
0.75
1
1.6
2
3
4
6
8
10
16
20
25
32
40
50
63
0.2
0.3
0.5
0.75
1
1.6
2
3
4
6
8
10
16
20
25
32
40
50
63
S221-K0.2
S221-K0.3
S221-K0.5
S221-K0.75
S221-K1
S221-K1.6
S221-K2
S221-K3
S221-K4
S221-K6
S221-K8
S221-K10
S221-K16
S221-K20
S221-K25
S221-K32
S221-K40
S221-K50
S221-K63
S222-K0.2
S222-K0.3
S222-K0.5
S222-K0.75
S222-K1
S222-K1.6
S222-K2
S222-K3
S222-K4
S222-K6
S222-K8
S222-K10
S222-K16
S222-K20
S222-K25
S222-K32
S222-K40
S222-K50
S222-K63
$ 66
66
66
66
66
66
66
66
66
66
66
66
66
66
70
74
87
99
110
$ 144
144
144
144
144
144
144
144
144
144
144
144
144
144
153
160
183
207
233
0.2
0.3
0.5
0.75
1
1.6
2
3
4
6
8
10
16
20
25
32
40
50
63
$ 226
226
226
226
226
226
226
226
226
226
226
226
226
226
241
256
289
328
367
S223-K0.2
S223-K0.3
S223-K0.5
S223-K0.75
S223-K1
S223-K1.6
S223-K2
S223-K3
S223-K4
S223-K6
S223-K8
S223-K10
S223-K16
S223-K20
S223-K25
S223-K32
S223-K40
S223-K50
S223-K63
B 3 0.540
A100.180
B 5 0.360
elop 3elop 1
2 pole
2.8ABB
AC1645 – 11/07
Discount schedule DS-CB
pro M
Accessories
Busbars & connectors (UL and IEC approved only)
S220, S280
L1....
L1 L2 L1 L2....
L1 L2 L3 L4 L1 L2 L3 L4....
L1 L2 L3 L1 L2 L3....
L1 L2 L3
L1 L2
L1
L1L2 L3 L4
1 Phase
2 Phase
3 Phase
4 Phase
Amp Number Busbar End cap Catalog List Delivery Suggested Weight
rating of length catalog number price class order qty. ounce
).cp 2(ytitnauqrebmunselop
55 12 207 – SZ-KS1/12 $ 10 10 0.6
55 56 988 – SZ-KS1/56 28 B52.6
85 56 988 – SZ-KS2/56 36 55.2
110 56 988 – SZ-VB45.32 53 5 10.0
50 58 1035 PSB-END3 SZ-PSB54N $ 96 14.4
65 58 1035 PSB-END3 SZ-PSB56N 96 B 1 19.1
50 12 213 – PSB-53UL 32 4.0
Amp Number Busbar End cap Catalog List Delivery Suggested Weight
rating of length catalog number price class order qty. ounce
).cp 2(ytitnauqrebmunselop
50 12 213 – PSB-3UL $ 32 34.3
65 60 1065 PSB-END6 SZ-PSB4N 101 B 1 21.4
50 60 1065 PSB-END6 SZ-PSB12N 138 1 34.2
Amp Number Busbar End cap Catalog List Delivery Suggested Weight
rating of length catalog number price class order qty. ounce
).cp 2(ytitnauqrebmunselop
50 60 1035 PSB-END4 SZ-PSB62N $ 161 B1
23.2
65 60 1035 PSB-END4 SZ-PSB64N 186 31.6
Amp Number Busbar End cap Catalog List Delivery Suggested Weight
rating of length catalog number price class order qty. ounce
).cp 2(ytitnauqrebmunselop
Uninsulated copper bar mounts flush with bottom edge of circuit breakers.
For use on bottom and lower sides of S280 and S220.
Insulated busbar assembly contains 2 separate circuits for use with 1, 1+N or 2 pole MCBs.
For use on bottom and lower sides of S280 and S220.
Insulated busbar assembly contains 3 separate circuits for use with 1 or 3 pole MCBs.
For use on bottom and lower sides of S280 and S220.
Insulated busbar assembly contains 4 separate circuits for use with 3+N1 or 4 pole MCBs.
For use on bottom and lower sides of S280 and S220.
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
ABB 2.9
AC1645 – 11/07
Discount schedule DS-CBA
pro M
Accessories
Busbars & connectors (UL and IEC approved only)
S220, S280
L1
L1
L1 L2 L3
L1 L2
L1 L2 L3
L1
L1
L2 L1 L2 L1 L2....
L2 L3 L1 L2 L3....
L1 L2 L3....
L1 L1....
1 Phase with 1 auxiliary
3 Phase for 1 pole MCB's with 1 auxillary
2 Phase with 1 auxillary
3 Phase with 1 auxillary
Amp Number Busbar End cap Catalog List Delivery Suggested Weight
rating of length catalog number price class order qty. ounce
).cp 2(ytitnauqrebmunselop
50 39 1044 SZ-KS3/39N $ 39 B1 7.4
65 39 1044 SZ-KS4/39N 44 B 1 10.1
Amp Number Busbar End cap Catalog List Delivery Suggested Weight
rating of length catalog number price class order qty. ounce
).cp 2(ytitnauqrebmunselop
65 48 1065 PSB-END3 SZ-PSB92N $ 136 B 1 23.2
Amp Number Busbar End cap Catalog List Delivery Suggested Weight
rating of length catalog number price class order qty. ounce
).cp 2(ytitnauqrebmunselop
50 48 980 PSB-END3 SZ-PSB50N $ 97 B 1 15.8
65 48 980 PSB-END3 SZ-PSB52N 124 B 1 22.6
Insulated copper bar mounts flush with bottom edge of circuit breakers.
For use on bottom and lower sides of S280 and S220.
Insulated busbar assembly contains 3 separate circuits for use with 1 or 3 pole MCBs.
For use on bottom and lower sides of S280 and S220.
Insulated busbar assembly contains 4 separate circuits for use with 3+N1 or 4 pole MCBs.
For use on bottom and lower sides of S280 and S220.
Amp Number Busbar End cap Catalog List Delivery Suggested Weight
rating of length catalog number price class order qty. ounce
).cp 2(ytitnauqrebmunselop
50 58 1044 PSB-END3 SZ-PSB46N $ 97 B 1 16.1
65 58 1044 PSB-END3 SZ-PSB48N 124 B 1 22.1
Insulated busbar assembly contains 2 separate circuits for use with 1, 1+N or 2 pole MCBs.
For use on bottom and lower sides of S280 and S220.
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
2.10 ABB
AC1645 – 11/07
Discount schedule DS-CBA
pro M
Accessories
Busbars & connectors (UL and IEC approved only)
S220, S280
L1 N L2 N L3 N L1 N L2....
NL1 L2 L3
3 Phase + N, for use with 2 pole MCB's
on 3 phase / 4W system
Catalog List Delivery Suggested Weight
ecnuo.ytq redrossalcecirprebmunnoitpircseD
qty. (2 pc.)
PSB-END3
Busbar end caps PSB-END4 $ 2 B10—
PSB-END5
PSB-END6
Amp Number Busbar End cap Catalog List Delivery Suggested Weight
rating of length catalog number price class order qty. ounce
).cp 2(ytitnauqrebmunselop
50 58 1048 PSB-END4 SZ-PSB58N $ 155 B 1 22.3
65 58 1048 PSB-END4 SZ-PSB60N 186 B 1 30.8
Insulated busbar assembly contains 4 separate circuits for use with 1+N or 2 pole MCBs.
For use on bottom and lower sides of S280 and S220.
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
ABB 2.11
AC1645 – 11/07
Discount schedule DS-CBA
pro M
Accessories
S280
S2-H11
S2-A1
S2-S
S2-S/H
S2-NT
.zo .tgWdetsegguS yrevileD tsiL golataClacirtcelE
).cp 1(seititnauq redrossalcecirprebmunseirossecca
Auxiliary contacts
For field mounting: left side
11H-2S.C.N 1 /.O.N 1 $ 28
02H-2S.O.N 2 28
20H-2S.C.N 2 28 B11.4
21H-2S.C.N 2 /.O.N 1 40
12H-2S.C.N 1 /.O.N 2 40
2 N.O./ 1 N.C. (low voltage) S2-H21KL 45
The S2-H11 auxiliary switch can be field S280 series breaker. The auxiliary contacts will signal whether the breaker is in the ON or OFF position.
The contacts are rated 6A/240 VAC and 1.5A/110 VDC. Minimum operating voltage is 12 VAC/VDC.
Bell alarm
For field mounting, left side S2-S $ 36 B11.4
The S2-S bell alarm includes a set of contacts that will only signal when the breaker has tripped. Typically the contacts would be connected to an
alarm or bell to signal the operator that an overcurrent trip has occured. The bell alarm also includes a test button for testing the alarm contacts
without opening the breaker. The contact is rated 6A/240 VAC and 1.5A/110 VDC. Minimum operating voltage is 12 VAC/VDC.
Bell alarm with auxiliary contact
For field mounting, left side S2-S/H $ 45 B11.4
The S2-S/H bell alarm with auxiliary contact device combines one set of bell alarm contacts with one set of auxiliary contacts (N.O.).
Shunt trip
For field mounting, left side
12-60 VAC (12-60VDC) S2-A1 $ 108 B15.2
110-415 VAC (110-250 VDC) S2-A2
For remote tripping of breaker, a shunt trip device can be added to the MCB. The solenoid device opens the breaker after control voltage is applied.
Shunt trips are available depending on control system voltage (12-415 VAC/VDC).
Undervoltage release
For field mounting, left or right side
21AU-2SV21
42AU-2SV42
84AU-2SV84 $ 170 B15.2
011AU-2SV011
022AU-2SV022
083AU-2SV083
When control voltage drops below approximately 50% of rated voltage, the S2-UA opens the breaker. The breaker can not be operated unless prop-
er control voltage is first applied to the UVR coil. Similar in size and mounting to the shunt trip accessory; can be left or right side mounted.
Hand operated neutral disconnect
For field mounting, right side, 40A max. S2-NT $ 22 B11.4
When switching of neutral with breaker contacts is desired, the neutral module S2-UA can be added to S280 MCB. The neutral connection makes
before the MCB contacts connect line to load. Makes contact before MCB contacts close. Must be opened manually.
Factory mounting
All accessories can be easily mounted in the field. For factory mounting of any accessory devices, add $50 list
to total price per breaker. To create complete catalog number, take suffix of accessory device following “S2-”
and add suffix to end of breaker part number. Multiple suffixes must be added in alphabetical order.
Example: S282UC-K20 $ 390
(2 pole, 20A breaker with type A1 shunt trip)
S282UC-K20 @ $232 + S2-A1 @ $108
+ factory mounting @ $50
S282UC-K20A2H11 $ 418 (2 pole, 20A breaker with type A2 shunt trip and H11 aux. contacts)
S282UC-K20 @ $232 + S2-A1 @ $108 + S2-H11 @ $28 + factory mounting @ $50
Auxiliary contacts and shunt trips may be mounted in combination.
NOTE: Above accesssories are for use with S280 Supplementary Protectors only.
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
2.12 ABB
AC1645 – 11/07
Discount schedule DS-CBA
pro M
ABB 2.13
AC1645 – 11/07
Technical data
Mounting and operating instructions
pro M
2.14 ABB
AC1645 – 11/07
Technical data
Busbars & connectors
Connection methods
pro M
S280
Technical data
S280UC, S280
ABB 2.15
AC1645 – 11/07
Technical data
S280UC, S280
pro M
S290
S220
Technical data
S290, S220
2.16 ABB
AC1645 – 11/07
Technical data
S290, S220
pro M
ABB 2.17
AC1645 – 11/07
pro M
2.18 ABB
AC1645 – 11/07
S500
Supplementary Protectors
S500
ABB 3.1
AC1645 – 11/07
elop 1elop 1
elop 2elop 2
elop 3elop 3
S500
S500 600Y/347VAC
S500 Supplementary Protectors
3.2ABB
AC1645 – 11/07
Discount schedule DS-CB
S500
1 pole
2 pole
3 pole
1 pole
2 pole
3 pole
S500
600Y/347VAC
IEC 898 IEC 947-2
Supplementary Protectors
ABB 3.3
AC1645 – 11/07
Discount schedule DS-CB
1 pole
2 pole
3 pole
4 pole
S500
S500 600Y/347VAC - 600VDC
Supplementary Protectors
3.4ABB
AC1645 – 11/07
Discount schedule DS-CB
1 pole
2 pole
3 pole
4 pole
S500
S500
600Y/347VAC - 600VDC
Supplementary Protectors
ABB 3.5
AC1645 – 11/07
Discount schedule DS-CB
S500
3.6ABB
AC1645 – 11/07
Discount schedule DS-CB
S500
ABB 3.7
AC1645 – 11/07
Technical data
S500
S500
3.8ABB
AC1645 – 11/07
ABB 4.1
AC1645 – 11/07
System pro Mcompact
Residual current devices
F200 series
Description
RCDs provide ground fault equipment
protection by monitoring the leakage of
current to ground. The F200 series will trip
when ground faults are detected in excess of
the GF trip rating of the device. These devices
provide GF protection only and are used in
series with standard MCBs which provide
overload and short circuit protection. The
F200 series can be used as a main device
providing GF protection for several MCB
branch devices.
2 Pole 4 Pole
The F200 series is cURus recognized accord-
ing to UL 1053 and to CSA C22.2 no.144.
The F202 is for use in single phase/two wire or
two wire systems. The F204 is for use in three
phase/four wire systems.
The F200 series RCDs replaces the F360
series with no change in form, fit or function.
The F200 have a profile similar to the S2
MCBs and can be used with the MCB bus-
bars.
pro Mcompact RCCB
pro Mcompact RCCB
4.2ABB
AC1645 – 11/07
Residual current devices
F200AC, F200A
F202AC Two pole 10mA 16 F202AC-16/0.01 $ 505
480VAC 30mA 25 F202AC-25/0.03 350
40 F202AC-40/0.03 395
63 F202AC-63/0.03 665
100mA 25 F202AC-25/0.1 350
40 F202AC-40/0.1 395 B 6 0.225
63 F202AC-63/0.1 565
300mA 25 F202AC-25/0.3 245
40 F202AC-40/0.3 275
63 F202AC-63/0.3 405
500mA 25 F202AC-25/0.5 395
40 F202AC-40/0.5 545
63 F202AC-63/0.5 365
F204AC Four pole 30mA 25 F204AC-25/0.03 $ 275
480VAC 40 F204AC-40/0.03 415
63 F204AC-63/0.03 615
100mA 25 F204AC-25/0.1 350
40 F204AC-40/0.1 415
63 F204AC-63/0.1 615 B 3 0.375
300mA 25 F204AC-25/0.3 260
40 F204AC-40/0.3 290
63 F204AC-63/0.3 420
500mA 25 F204AC-25/0.5 260
40 F204AC-40/0.5 290
63 F204AC-63/0.5 420
Breaker GF trip Rated Catalog List Delivery Suggested Wgt. kg
level current number price class order qty (1 Pc.)
F202A Two pole 10mA 16 F202A-16/0.01 $ 590
480VAC 30mA 25 F202A-25/0.03 410
40 F202A-40/0.03 466
63 F202A-63/0.03 660
100mA 25 F202A-25/0.1 410
40 F202A-40/0.1 465 B 6 0.225
63 F202A-63/0.1 660
300mA 25 F202A-25/0.3 285
40 F202A-40/0.3 320
63 F202A-63/0.3 475
500mA 25 F202A-25/0.5 460
40 F202A-40/0.5 640
63 F202A-63/0.5 425
F204A Four pole 30mA 25 F204A-25/0.03 $ 320
480VAC 40 F204A-40/0.03 485
63 F204A-63/0.03 725
100mA 25 F204A-25/0.1 425
40 F204A-40/0.1 485
63 F204A-63/0.1 725 B 3 0.375
300mA 25 F204A-25/0.3 305
40 F204A-40/0.3 340
63 F204A-63/0.3 495
500mA 25 F204A-25/0.5 305
40 F204A-40/0.5 340
63 F204A-63/0.5 495
Breaker GF trip Rated Catalog List Delivery Suggested Wgt. kg
level current number price class order qty (1 Pc.)
A type - for alternating current and/or current with DC components
AC type - for alternating current only
F202
F204
Discount schedule DS-CB
F200
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
pro Mcompact RCCB
ABB 4.3
AC1645 – 11/07
Approximate dimensions & circuit diagrams
Residual current devices, F200
Approximate dimensions
Circuit diagrams
1For use on 3p/3w systems, add jumper between 4 and 8N for operation of test button.
2 pole
2.76
70
3.54
90
1.38
35
2.91
74
1.96
50.2
1.77
45
4 pole
pro Mcompact RCCB
4.4ABB
AC1645 – 11/07
NOTES
ABB 5.1
AC1645 – 11/07
System pro M compact
Modular installation equipment
Description
• Safe connection by box terminals
• Captive screws with Pozidrive slotted head,
Pozidrive system, Gr. 1
• Snap-on labels available
• Quick mounting with snap-on clip, easily
accessible and detachable at the bottom
• Protection against unintentional direct touch
• System approach for control and circuit
protection
• Compact size that dimensionally matches
the S2 MCB series
• Control and pilot functions can be along
side protective devices
• DIN rail mounted with 45mm front opening
• For use in auxiliary and logic devices
• Provide additional user functions for system
control and operation
• Include pushbuttons, indicating lights and
selector switches
• ABB System pro Mcompatibility
• Most devices are UL 508 and CSA C22.2
NO 14 recognized and are IEC compliant
• Labeled with the CE Mark
pro MMDRC
pro MMDRC
5.2ABB
AC1645 – 11/07
Modular installation equipment
Switches, 240VAC
16 & 25A
E221-10
Discount schedule DS-CB
Type Rated Catalog List Delivery Minimum Weight (Oz.)
current number price schedule order quantity 1 piece
Switches
Note: Above devices are UL 508 recognized CSA C22.2 N° 14 approved and IEC certified.
A300 pilot duty
1 Pole 16 E221-4 $ 66 C10 2.12
2 Pole 16 E221-4/2 98 2.47
1 Pole 25 E222-4 $ 100 C 10 2.12
Form “C” switches (I-O-II, Hand-OFF-Automatic)
1 Change-over contact 16 E221-6 $ 46 C10 2.12
2 Change-over contacts 16 E221-6/2 83 2.47
1 Change-over contact 25 E222-6 $85 C 10 2.12
Form “C” switches
1 N.O. + 1 N.C. 16 E221-11 $ 60
2 N.O. + 2 N.C. 16 E221-22 118 C 10 2.46
3 N.O. + 1 N.C. 16 E221-31 118
1 N.O. 16 E221-10 $39 1.94
2 N.O. 16 E221-20 73 C10 2.12
3 N.O. 16 E221-30 80 2.29
4 N.O. 16 E221-40 106 2.47
1 N.O. + 1 N.C. 25 E222-11 $93 2.47
1 N.O. 25 E222-10 71 1.94
2 N.O. 25 E222-20 94 C 10 2.12
3 N.O. 25 E222-30 106 2.29
4 N.O. 25 E222-40 159 2.47
Pilot
devices
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
pro MMDRC
ABB 5.3
AC1645 – 11/07
Modular installation equipment
Disconnect switches
45, 63, 80 & 100A
Single pole, 240V 45 E201/45r $ 36
63 E201/63r 40 C 10 2.82
80 E201/80r 48
100 E201/100r 64
125 E201/125r 69
Two pole, 415V 45 E202/45r $ 76
63 E202/63r 84 C 5 6.17
80 E202/80r 100
100 E202/100r 136
125 E202/125r 146
Three pole, 415V 45 E203/45r $ 116
63 E203/63r 128 C 3 9.52
80 E203/80r 152
100 E203/100r 204
125 E203/125r 218
Four pole, 415V 45 E204/45r $ 156
63 E204/63r 172 C 2 12.87
80 E204/80r 204
100 E204/100r 272
125 E204/125r 282
Isolator switches
The E201 series operate as disconnect switches
and are typically used as a main disconnect for
several branch MCB devices. The isolator switches
offer no overcurrent protection. The E201 series is
the same physical size and shape as the S260,
S270 & S280 series. The switches include dual
function terminals and can be connected via
standard ABB busbar through the upper or lower
terminals.
Type Rated Catalog List Delivery Suggested Weight (Oz.)
current number price schedule order qtys 1 piece
E201/125r
E203/45r
Discount schedule DS-CB
Above devices are IEC certified.
Disc.
Sws.
Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
pro MMDRC
5.4ABB
AC1645 – 11/07
Modular installation equipment
Pilot devices
Pushbutton, 1 N.O. + 1 N.C. contact
E225-11F
E227-10E
Type Catalog List Delivery Pack Weight (Oz.)
number price schedule units pcs. 1 piece
Discount schedule DS-CB
Lamps
Clear E229-B/110
Red E229-C/110
Green E229-D/110 $ 62 C 10 1.59
Yellow E229-E/110
Blue E229-G/110
Pilot light with lamp, 120 VAC
Clear E227-10B/110
Red E227-10C/110
Green E227-10D/110 $ 67 C 10 1.94
Yellow E227-10E/110
Blue E227-10G/110
Illuminated pushbutton, 1 N.O. contact with lamp, 120 VAC
Grey E225-11B
Red E225-11C
Green E225-11D $ 50 C 10 1.94
Yellow E225-11E
Black E225-11F
Blue E225-11G
Pilot
devices
24 VAC, 60 Hz E233-24/60
120 VAC, 60 Hz E233-120/60 $ 95 C 1 0.045
240 VAC, 60 Hz E233-240/60
Type Catalog List Delivery Pack Weight (KG)
number price schedule units pcs. 1 piece
Elapsed time meter
Special features
• Safe connection via box terminals
• Captive screws with Phillips/Slotted head, Posidriv system, Gr. 1
• Snap-on labels available
• Protection against unintentional touch acc. to DIN VDE 0106 Part 100
• Lenses and pushbuttons in six colors
Note: Above devices are UL 508 recognized and IEC certified.
• Non-resettable
• 100,000 hours (99999.99) Delivery Class
A- Standard item, stock to 2 weeks lead time
B- Stock to 4 weeks lead time
C- 6 to 8 week lead time
24 VAC E10/24
120 VAC E10/110 $ 16 C 1 0.14
230 VAC E10/230
pro MMDRC
ABB 5.5
AC1645 – 11/07
Components for quick mounting onto DIN rails (35mm)
Mounting depth: 68mm
Mounting width: 1, 2, 3 and 4 pole switches = 17.5mm (= 1 module)
E220 Switches, 16 & 25A
Switching capacity: 1.25 In, 1.1Un, cos j = 0.6
Short-circuit withstanding capacity: 3 kA, 380V, cos j = 0.9
Toggle sealable: In ON and OFF positions
Connection cross-sections: Up to 1 x 6mm2or 2 x 2.5mm2
Rated AC voltage: 240 VAC UL/CSA (E171252)
250/440 VAC IEC
E240/270 Disconnect switches, 45, 63, 80, & 100A
Switching capacity: 1.25 In, 1.1Un, cos j = 0.3
Short-circuit withstanding capacity: E240 = 10kA, E270 = 25kA RMS
Connection cross-sections: E240 up to 25mm2
E270 up to 50mm2
Rated AC voltage: 240/400/415 VAC
E Series components for quick mounting onto DIN rails (35mm)
Mounting depth 68mm
Mounting width: 17.5mm (=1 module)
Color: RAL 7035, grey
Connection cross sections: Up to 1 X 6mm2or 2 X 2.5mm2
Rated current: 16A
Rated voltage: 250 VAC IEC
Rated voltage: 240 VAC UL/CSA (E171252)
Modular installation equipment
Technical data
Terminal markings
Terminal assignments for pushbuttons and indicator lights
Disc.
Sws.
pro MMDRC
5.6ABB
AC1645 – 11/07
Modular installation equipment
Approximate dimensions
E220, 16 & 25A
E220
E240/270
E233
Dims
Quick information
Control Products Power Quality Products
Entrelec Products
Circuit Protective Devices
Atlantic Region
Brockway Enterprises
51 Cobequid Road
Lower Sackville, NS
B4C 2N1
Tel.: (902) 864-8236
Fax: (902) 865-8252
Eastern Region
ABB Inc.
2117, 32eAvenue
Lachine, QC CANADA
H8T 3J1
Tel.: (514) 420-3100
Fax: (514) 420-3137
Central Region
ABB Inc.
201 Westcreek Blvd.
Brampton, ON L6T 5S6
Tel.: (905) 460-3000
Fax: (905) 460-3395
Central Region
Adanac Sales Inc.
# 3 - 2075 Brigantine Drive
Coquitlam, BC V3K 7B8
Tel.: (604) 540-0220
Fax: (604) 540-0124
Mid-West Region
ABB Inc.
# 110 - 4411-6 th Street S.E.
Calgary, AB T2G 4E8
Tel.: (403) 278-7111
Fax: (403) 278-8232
Electro-Tech Sales Ltd.
# 10 - 2166 Notre-Dame Ave.
Winnipeg, MB R3H 0K2
Tel.: (204) 694-7063
Fax: (204) 697- 0568
ABB Inc.
2117, 32eAvenue
Lachine, QC CANADA H8T 3J1
Tel.: (514) 420-3100
Fax: (514) 420-3137
Web site: www.abb.ca
AC1645 - November 2007
