Specification Tyco Electronics Control Drawing Raychem a) Part as supplied. 202K1**-100-01 t 4 H DIA - - - + J DIA a iN b) Part after unrestricted recovery. {at P }-ag JW H DIA - - ou =a] fa! so we 1 tl 2.0mm DIA HOLE DIMENSIONS ip millimetres fin inches, for reference} H J P R S T U JO HW JW Part No. Min Max = Min Max = #10% 410% = #10% = #10% = #10% = 410% = 420% = 20% a b a b b b b b b b b b 24 10.4 14 5.6 26 3 3.0 1.0 8.5 1.6 0.5 202K 121-100-01 {0. 94) {0.41} {0.55) {0. 22) {1. 02) {0. 35) {0. 12) {0. 04) @ {0. 33) {0. 06) {0. 02) 30 14.2 15 5.9 43 20 3.0 1.0 11.5 1.8 1.0 202K 132-100-01 {1.18} (0.56) {0.59} {0.23} {1.69} {0.79} (0.12) (0.04) {0. 45) (0.07) (0.04) 31 18.0 18 7.1 47 15 3.0 1.0 @ 17.0 1.8 1.0 202K142-100-O1 455) 0.71) 0.71) (0.28) ~7.85) 10.59) (0.12) (0. 04) (0.67) {0.07} {0.04} 36 22.4 21 8.4 60 22 3.0 1.0 19.5 2.0 1.0 202K 153-100-01 {1. 42) (0. 88) {0.83) {0.33} {2.36) {0.87} (0.12) (0.04) {0.77} {0.08} (0.04) 43 28.2 25 9.9 73 41 3.0 1.7 20 21.0 2.2 1.0 202K 163-100-01 (1.69) {1.71} {0.98) {0.39} {3.11} (1.61 (0.12) (0.07) {0.79} {0.83} {0.09} (0.04) 52 35.1 33 13.7 110 32 3.0 1.7 20 39.0 3.2 1S 202K174-100-01 (595) 7.38) 11.54) (0.62) (4.33) (2.05) (0.12) (0.07) (0.79) (1.54) (0.13) (0.08) _ _ 66 44.5 42 16.8 150 70 3.0 2,0 20 S1.5 3.8 2,0 202K185-100-01 (2.60) (1.75) (1.65) (0.66) (5.91) (2.76) {0.12} {0.08} {0.79} (2.03) {0.15} {0.08} # # # This is a trimmed variant Modified dimensions are shown thus:- # Copyright C!) The copyright in this drawing is the property of Tyco Electronics UK Ltd. The drawing is issued on the condition that it is not copied, reproduced or disclosed to a third party, either in whole or in part without the prior written consent of Tyco Electronics UK Ltd. Drawn A.LILLEY. Checked Issue 3 Date April 2007 Conforms to ISO Recommendations 3rd Angle Projection Approval Not to Scale mo Design MKTG. Q.A. Page 1 of 2 202K 1XX-100-01Part Number Specification Raychem 202K1**-100-01. tesve 3 Control Drawing Iss. Date Eee. Details of Change O. 2 eptember 2001] CRO1-HM-0018 "R dimension changed 3 April 2007 CRO7-HM-010 Document title was 202K121 thru 185-100-01 (Ordering Information) 202K 1 k 100-01 /*X PL Adhesive Slash Number Modification number Material Dash Number (see compatibility chart) Base Part Number (COMPATIBILITY CHART) Material Dash Number| Material Description SPEC Number Coating Slash Number NOTES @ Dimension U does not apply on sizes 202K121 thru 153 @) If eyelet clip COOOW21T2) is required with part then add C5-1858 to description Ci.e. 202K132-100-01-CS-1858-0) . GB) As supplied dimensions are for uncoated parts, when coating is added entry diameters will reduce by 1.5mm Max. Tyco Electronics UK Ltd. Tyco Electronics Corporation Faraday Road, 300, Constitution Drive, Swindon, Wiltshire, SN3 SHH Menlo Park, CA 94025 England USA Telephone: (01793) 528171 Fax: 572516 Telephone (650) 361-3860 Fax: (650) 361-5579 Cage Code K1010 Cage Code 060390 Page 2 of 2