Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 1 of 12
Device No: Prepared date: 10-Jan.-2013 Prepared by:Xiang Liudan
Technical Data Sheet
Right Angle Lens Chip LED with Bi-Color(Multi-Color)
12-22/R6GHC-A30/2C
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Mulit-color type.
․Pb-free.
․The product itself will remain within RoHS compliant version.
Descriptions
․The 12-22 SMD LED is much smaller
than lead frame type components, thus
enable smaller board size, higher packing
density, reduced storage space and finally
smaller equipment to be obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Chip
Emitted Color
Resin Color
Type
Material
R6
AlGaInP
Brilliant Red
Water Clear
GH
InGaN
Brilliant Green
12-22/R6GHC-A30/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 2 of 12
Device No: Prepared date: 10-Jan.-2013 Prepared by:Xiang Liudan
Package Outline Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
12-22/R6GHC-A30/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 3 of 12
Device No: Prepared date: 10-Jan.-2013 Prepared by:Xiang Liudan
Absolute Maximum Ratings (Ta=25℃)
Parameter
Rating
Unit
Reverse Voltage
5
V
Forward Current
R6:25
GH:25
mA
Peak Forward Current
(Duty 1/10 @1KHz)
R6:60
GH:100
mA
Power Dissipation
R6:60
GH:95
mW
Electrostatic Discharge(HBM)
R6:2000
GH:150
V
Operating Temperature
-40 ~ +85
℃
Storage Temperature
-40~ +90
℃
Soldering Temperature
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
12-22/R6GHC-A30/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 4 of 12
Device No: Prepared date: 10-Jan.-2013 Prepared by:Xiang Liudan
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Typ.
Max.
Unit
Condition
Luminous Intensity
Iv R6
GH
----
----
180
285
mcd
IF=20mA
Viewing Angle
2θ1/2
120
-----
deg
Peak Wavelength
λp R6
GH
632
518
-----
nm
Dominant Wavelength
λd R6
GH
624
525
----
----
nm
Spectrum Radiation
Bandwidth
△λ R6
GH
20
35
-----
nm
Forward Voltage
VF R6
GH
2.0
3.3
2.4
3.7
V
Reverse Current
IR R6
GH
-----
10
50
μA
VR=5V
Notes:
1.Tolerance of Luminous Intensity ±11%
12-22/R6GHC-A30/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 5 of 12
Device No: Prepared date: 10-Jan.-2013 Prepared by:Xiang Liudan
Bin Range Of Luminous Intensity
R6
Bin
Min
Max
Unit
Condition
Q
72
112
mcd
IF=20mA
R
112
180
GH
Bin
Min
Max
Unit
Condition
R
112
180
mcd
IF=20mA
S
180
285
Notes:
1.Tolerance of Luminous Intensity ±11%
12-22/R6GHC-A30/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 6 of 12
Device No: Prepared date: 10-Jan.-2013 Prepared by:Xiang Liudan
Typical Electro-Optical Characteristics Curves
R6
Relative luminous intensity
Ambient Temperature T (°C )
a
% )
(Relative luminous intensity()%
Wavelength λ(nm)
Ta=25°C
Forward Voltage V (V)
F
Forward Current I (mA)
Relative luminous intensity ()%
Forward Current I (mA)
Ta=25°C
Ambient Temperature T (°C
a)
Forward Current I (mA)
Ta=25°C
0°
0.5 0.3 0.1
0.7
0.8
0.9
1.0 40°
80°
0.60.2 0.4 90°
70°
60°
50°
10° 20° 30°
Ta=25°C
12-22/R6GHC-A30/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 7 of 12
Device No: Prepared date: 10-Jan.-2013 Prepared by:Xiang Liudan
Typical Electro-Optical Characteristics Curves
GH
Relative luminous intensity
Ambient Temperature T (°C )
a
% )
(Relative luminous intensity()%
Wavelength λ(nm)
Ta=25°C
Forward Voltage V (V)
F
Forward Current I (mA)
Relative luminous intensity ()%
Forward Current I (mA)
Ta=25°C
Ambient Temperature T (°C
a)
Forward Current I (mA)
Ta=25°C
0°
0.5 0.3 0.1
0.7
0.8
0.9
1.0 40°
80°
0.60.2 0.4 90°
70°
60°
50°
10° 20° 30°
Ta=25°C
12-22/R6GHC-A30/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 8 of 12
Device No: Prepared date: 10-Jan.-2013 Prepared by:Xiang Liudan
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
RoHS
Pb
CPN :
P N : XXXXXXXXXXXXX
XXXXXXXXXXXXX
QTY : XXX
LOT NO : XXXXXXXXXX
Reference : XXXXXXXX
CAT : XXX
HUE : XXX
REF : XXX
EVERLIGHT
MADE IN TAIWAN
12-22/R6GHC-A30/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 9 of 12
Device No: Prepared date: 10-Jan.-2013 Prepared by:Xiang Liudan
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Label Desiccant Label
Aluminum moisture-proof bag
12-22/R6GHC-A30/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 10 of 12
Device No: Prepared date: 10-Jan.-2013 Prepared by:Xiang Liudan
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level：90%
LTPD：10%
No.
Items
Test Condition
Test
Hours/Cycles
Sample
Size
Ac/Re
1
Reflow Soldering
Temp. : 260℃±5℃
Min. 5sec.
6 Min.
22 PCS.
0/1
2
Temperature Cycle
H : +100℃ 15min
∫ 5 min
L : -40℃ 15min
300 Cycles
22 PCS.
0/1
3
Thermal Shock
H : +100℃ 5min
∫ 10 sec
L : -10℃ 5min
300 Cycles
22 PCS.
0/1
4
High Temperature
Storage
Temp. : 100℃
1000 Hrs.
22 PCS.
0/1
5
Low Temperature
Storage
Temp. : -40℃
1000 Hrs.
22 PCS.
0/1
6
DC Operating Life
IF = 20 mA
1000 Hrs.
22 PCS.
0/1
7
High Temperature /
High Humidity
85℃/ 85%RH
1000 Hrs.
22 PCS.
0/1
12-22/R6GHC-A30/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 11 of 12
Device No: Prepared date: 10-Jan.-2013 Prepared by:Xiang Liudan
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
12-22/R6GHC-A30/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 12 of 12
Device No: Prepared date: 10-Jan.-2013 Prepared by:Xiang Liudan
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within
once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of the
hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267 -6306
Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com