Plug-In Low Noise Amplifier 50 AMP-77+ 5 to 500 MHz Features * low noise, 3.3 dB typ. * high IP3, +32 dBm typ. * hermetic, TO-8 can CASE STYLE: PP120 PRICE: $60.45 ea. Qty. (1-9) Applications + RoHS compliant in accordance with EU Directive (2002/95/EC) * military, hi-rel applications * small signal amplifier * VHF/UHF The +Suffix has been added in order to identify RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications. Low Noise Amplifier Electrical Specifications MODEL NO. FREQUENCY (MHz) NOISE FIGURE (dB) GAIN (dB) MAXIMUM POWER (dBm) INTERCEPT POINT (dBm) VSWR (:1) Typ. DC POWER Flatness Max. AMP-77+ fL fU Typ. Min. m Total Range Output (1 dB Compr.) Input (no damage) IP3 Typ. In Out Volt (V) Nom. Current (mA) Max. 5 500 3.3 15 0.4 1.0 +16 +13 +32 2.0 2.0 15 56 m = mid range [2 fL to fU/2] Open load is not recommended, potentially can cause damage. With no load derate max input power by 20 dB Pin Connections Maximum Ratings RF IN 2 Operating Temperature RF OUT 4 Storage Temperature -54C to 85C DC 1 DC Voltage GROUND 3 CASE GROUND 3 Permanent damage may occur if any of these limits are exceeded. -55C to 100C +17V Max. Outline Drawing Outline Dimensions ( inch mm ) A .50 12.70 B .21 5.33 C .15 3.81 D .016 0.41 E .020 0.51 F .04 1.02 G wt .300 grams 7.62 1.5 Mini-Circuits (R) ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine For detailed performance specs & shopping online see web site (R) Provides ACTUAL Data Instantly at minicircuits.com IF/RF MICROWAVE COMPONENTS Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications and performance data contained herein are based on Mini-Circuit's applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, "Standard Terms"); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits' website at www.minicircuits.com/MCLStore/terms.jsp. REV. A M121747 AMP-77+ 090826 Page 1 of 2 AMP-77+ Typical Performance Data/Curves FREQUENCY (MHz) GAIN (dB) 12V 15V 5.00 11.30 33.40 98.80 195.40 16.26 16.55 16.75 16.74 16.55 16.25 16.58 16.79 16.77 16.59 246.20 309.60 373.10 436.50 500.00 16.43 16.27 16.13 16.04 15.92 16.47 16.32 16.19 16.08 15.98 DIRECTIVITY (dB) 16V 5.00 4.30 3.80 3.50 3.00 5.10 4.30 3.80 3.50 3.00 1.49 1.25 1.13 1.11 1.13 1.57 1.25 1.09 1.16 1.35 -- 3.30 3.27 3.30 3.24 18.30 18.96 19.66 19.68 19.62 16.46 16.28 16.14 16.04 15.93 2.50 2.20 1.80 1.40 1.10 2.70 2.30 1.90 1.60 1.30 2.70 2.40 2.00 1.70 1.40 1.15 1.18 1.21 1.23 1.24 1.41 1.47 1.45 1.44 1.36 3.24 3.27 3.25 3.26 3.28 19.49 19.24 19.08 19.11 19.25 AMP-77+ VSWR 2.0 15.6 15.0 0 100 200 300 FREQUENCY (MHz) 400 3.0 2.0 18.4 18.0 300 FREQUENCY (MHz) 400 500 1.6 1.4 1.2 1.0 0 NOISE FIGURE (dB) OUT POWER (dBm) 18.8 OUT 1.0 4.0 19.2 IN 1.8 100 200 300 400 0 500 100 200 300 400 500 FREQUENCY (MHz) FREQUENCY (MHz) 19.6 200 16V 0.0 500 20.0 100 15V 4.0 AMP-77+ OUTPUT POWER AT 1-dB COMPRESSION 0 12V 5.0 VSWR DIRECTIVITY (dB) 16.2 15V 5.00 4.30 3.80 3.50 2.90 16V 16.8 15V 16.23 16.55 16.76 16.76 16.57 AMP-77+ DIRECTIVITY 15V OUT 16V 6.0 12V 17.4 POUT at 1 dB COMPR. (dBm) 15V AMP-77+ GAIN IN NOISE FIGURE (dB) 12V 18.0 GAIN (dB) VSWR (:1) AMP-77+ NOISE FIGURE at 15V 3.8 3.6 3.4 3.2 3.0 0 100 200 300 FREQUENCY (MHz) 400 500 Mini-Circuits (R) ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine For detailed performance specs & shopping online see web site (R) Provides ACTUAL Data Instantly at minicircuits.com IF/RF MICROWAVE COMPONENTS Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications and performance data contained herein are based on Mini-Circuit's applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, "Standard Terms"); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits' website at www.minicircuits.com/MCLStore/terms.jsp. Page 2 of 2