ES1DLW - ES1JLW Taiwan Semiconductor CREAT BY ART 1A, 200V - 600V Surface Mount Super Fast Rectifiers FEATURES - Glass passivated junction chip - Ideal for automated placement - Low profile package - Low power loss, high efficiency - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC 61249-2-21 MECHANICAL DATA Case: SOD-123W SOD-123W Molding compound: UL flammability classification rating 94V-0 Moisture sensitivity level: level 1, per J-STD-020 Part no. with suffix "H" means AEC-Q101 qualified Packing code with suffix "G" means green compound (halogen-free) Terminal: Matte tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 2 whisker test Polarity: Indicated by cathode band Weight: 16 mg (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25C unless otherwise noted) PARAMETER SYMBOL Marking Code ES1DLW ES1GLW ES1JLW EDLW EGLW EJLW UNIT Maximum repetitive peak reverse voltage VRRM 200 400 600 V Maximum RMS voltage VRMS 140 280 420 V Maximum DC blocking voltage VDC 200 400 600 V Maximum average forward rectified current IF(AV) 1 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A Maximum instantaneous forward voltage (Note 1) @1A Maximum reverse current @ rated VR TJ=25C TJ=125C VF IR 0.95 1.30 5 100 1.70 V A Typical junction capacitance (Note 2) CJ 20 pF Maximum reverse recovery time (Note 3) trr 35 ns RJL RJA 25 80 C/W TJ - 55 to +175 C TSTG - 55 to +175 C Typical thermal resistance Operating junction temperature range Storage temperature range Note 1: Pulse test with PW=300s, 1% duty cycle Note 2: Measured at 1 MHz and applied VR=4.0 V Note 3: Test conditions: IF=0.5A, IR=1.0A, IRR=0.25A Document Number: DS_D0000174 Version: A15 ES1DLW - ES1JLW Taiwan Semiconductor ORDERING INFORMATION PART NO. PART NO. SUFFIX ES1xLW (Note 1, 2) PACKING CODE PACKING CODE SUFFIX RV RQ H G PACKAGE PACKING SOD-123W 3,000 / 7" Plastic reel 10,000 / 13" Paper reel Note 1: "x" defines voltage from 200V (ES1DLW) to 600V (ES1JLW) Note 2: Whole series with green compound ( halogen-free) EXAMPLE EXAMPLE P/N PART NO. ES1JLWHRVG ES1JLW PART NO. SUFFIX PACKING CODE PACKING CODE H DESCRIPTION SUFFIX RV AEC-Q101 qualified Green compound G RATINGS AND CHARACTERISTICS CURVES (TA=25C unless otherwise noted) FIG. 2 TYPICAL FORWARD CHARACTERISTICS FIG.1 FORWARD CURRENT DERATING CURVE 100 1 0.8 0.6 0.4 Resistive or inductive load 0.2 0 0 25 50 75 100 125 150 175 INSTANTANEOUS FORWARD CURRENT (A) AVERAGE FORWARD CURRENT (A) 1.2 Pulse width=300s 1% duty cycle ES1GLW 10 ES1DLW 1 ES1JLW 0.1 0 0.2 0.4 FIG. 3 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT INSTANTANEOUS REVERSE CURRENT (A) PEAK FORWARD SURGE CURRENT (A) 25 8.3ms single half sine wave 20 15 10 5 0 NUMBER OF CYCLES AT 60 Hz Document Number: DS_D0000174 1 1.2 1.4 1.6 1.8 2 FIG. 4 TYPICAL REVERSE CHARACTERISTICS 30 10 0.8 FORWARD VOLTAGE (V) LEAD TEMPERATURE (C) 1 0.6 100 100 10 TJ=125C 1 0.1 TJ=25C 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Version: A15 ES1DLW - ES1JLW Taiwan Semiconductor FIG. 5 TYPICAL JUNCTION CAPACITANCE 50 45 CAPACITANCE (pF) 40 35 30 25 20 15 10 f=1.0MHz Vsig=50mVp-p 5 0 0.1 1 10 100 REVERSE VOLTAGE (V) PACKAGE OUTLINE DIMENSIONS SOD-123W Unit (mm) DIM. Unit (inch) Min Max Min Max B 1.70 1.90 0.067 0.075 C 2.60 2.90 0.102 0.114 D 0.10 0.22 0.004 0.009 E 0.90 1.02 0.035 0.040 F 0.90 1.05 0.035 0.041 G 3.60 3.80 0.142 0.150 H 0.50 0.85 0.020 0.033 I 0.00 0.10 0.000 0.004 SUGGESTED PAD LAYOUT Symbol Unit (mm) Unit (inch) A 1.4 0.055 B 1.2 0.047 C 3.1 0.122 D 1.9 0.075 E 4.3 0.169 MARKING DIAGRAM P/N = Marking Code G = Green compound Code YW = Date Code F = Factory Code Document Number: DS_D0000174 Version: A15 ES1DLW - ES1JLW Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Document Number: DS_D0000174 Version: A15