https://www.phoenixcontact.com/us/products/2902993
03/22/2021Page1/9
Power supply unit-UNO-PS/1AC/24DC/100W-2902993
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/100 W
Product Description
UNO POWER power supplies with basic functionality
Thanks to their high power density, compact UNO POWER power supplies are the ideal solution for loads up to 240 W, particularly in compact control
boxes. The power supply units are available in various performance classes and overall widths. Their high degree of efficiency and low idling losses
ensure a high level of energy efficiency.
Your advantages
Flexible mounting by simply snapping onto the DIN rail
More space in the control cabinet with up to 20 % higher power density
Maximum energy efficiency, thanks to over 90 % efficiency and extremely low idling losses under 0.3 W
Outdoor installation, thanks to the wide temperature range from -25°C to +70°C
Key Commercial Data
Packing unit 1 pc
GTIN
GTIN 4046356729215
Weight per Piece (excluding packing) 390.000 g
Custom tariff number 85044030
Country of origin Vietnam
Technical data
Dimensions
Width 55 mm
https://www.phoenixcontact.com/us/products/2902993
03/22/2021Page2/9
Power supply unit-UNO-PS/1AC/24DC/100W-2902993
Technical data
Dimensions
Height 90 mm
Depth 84 mm
Installation distance right/left 0 mm / 0 mm
Installation distance top/bottom 30 mm / 30 mm
Ambient conditions
Degree of protection IP20
Inflammability class in acc. with UL 94 (housing / terminal blocks) V0
Ambient temperature (operation) -25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K)
Ambient temperature (start-up type tested) -40 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing)
Climatic class 3K3 (in acc. with EN 60721)
Degree of pollution 2
Input data
Nominal input voltage range 100 VAC ... 240 VAC
Input voltage range 85 VAC ... 264 VAC
Frequency range (fN)50 Hz ... 60 Hz 10%
Current consumption 2.1 A (100VAC)
0.95 A (240VAC)
Nominal power consumption 242.6 VA
Inrush current < 40 A (typical)
Mains buffering time > 20 ms (120VAC)
> 100 ms (230 V AC)
Input fuse 4 A (slow-blow, internal)
Recommended breaker for input protection 6 A ... 16 A (Characteristics B, C, D, K)
Power factor (cos phi) 0.47
Type of protection Transient surge protection
Protective circuit/component Varistor
Output data
Nominal output voltage 24 VDC ±1%
Nominal output current (IN)4.2 A (-25°C...55°C)
Derating 55 °C ... 70 °C (2.5%/K)
Connection in parallel Yes, for redundancy and increased capacity
Connection in series yes
Feedback voltage resistance < 35 VDC
Protection against overvoltage at the output (OVP) ≤ 35 VDC
https://www.phoenixcontact.com/us/products/2902993
03/22/2021Page3/9
Power supply unit-UNO-PS/1AC/24DC/100W-2902993
Technical data
Output data
Control deviation < 1 % (change in load, static 10 % ... 90 %)
< 2 % (Dynamic load change 10 % ... 90 %, 10 Hz)
< 0.1 % (change in input voltage ±10 %)
Residual ripple < 30 mVPP (with nominal values)
Output power 100 W
Typical response time < 1 s
Maximum power dissipation in no-load condition < 0.5 W
Power loss nominal load max. < 11 W
General
Net weight 0.34 kg
Efficiency typ. 88 % (120VAC)
typ. 89 % (230 V AC)
MTBF (IEC 61709, SN 29500) > 738000 h (40°C)
Insulation voltage input/output 4 kV AC (type test)
3 kV AC (routine test)
Degree of protection IP20
Protection class II (in closed control cabinet)
Inflammability class in acc. with UL 94 (housing / terminal blocks) V0
Housing material Polycarbonate
Foot latch material POM (Polyoxymethylen)
Mounting position horizontal DIN rail NS 35, EN 60715
Assembly instructions alignable: 0mm horizontally, 30mm vertically
Connection data, input
Connection method Screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 14
Stripping length 8 mm
Screw thread M3
Connection data, output
Connection method Screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
https://www.phoenixcontact.com/us/products/2902993
03/22/2021Page4/9
Power supply unit-UNO-PS/1AC/24DC/100W-2902993
Technical data
Connection data, output
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 14
Stripping length 8 mm
Screw thread M3
Standards
EMC requirements for noise immunity EN61000-6-1
EN61000-6-2
EMC requirements for noise emission EN61000-6-3
EN61000-6-4
Standard - Safety of transformers EN61558-2-16
Standard - Electrical safety IEC62368-1/VDE0805 (SELV)
Standard – Electronic equipment for use in electrical power installations
and their assembly into electrical power installations EN50178/VDE0160 (PELV)
Standard – Safety extra-low voltage IEC62368-1 (SELV) und EN60204-1 (PELV)
Standard - Safe isolation DINVDE0100-410
Standard – Limitation of mains harmonic currents EN61000-3-2
Mains variation/undervoltage EN61000-4-11
Conformance/approvals
UL approvals UL/C-UL listed UL 508
UL/C-UL Listed ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D
T4 (Hazardous Location)
UL/C-UL Recognized UL 60950-1
CSA CAN/CSA-C22.2 No.60950-1-07
CSA-C22.2 No.107.1-01
CAN/CSA-C22.2 No. 213 Class I, Division 2, Groups A, B, C, D T4
(Hazardous Location)
EMC data
Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Low Voltage Directive Conformance with Low Voltage Directive 2014/35/EC
Electrostatic discharge EN 61000-4-2
Contact discharge 6 kV (Test Level 3)
Discharge in air 8 kV (Test Level 3)
Electromagnetic HF field EN61000-4-3
Frequency range 80 MHz ... 1 GHz
Test field strength 10 V/m
https://www.phoenixcontact.com/us/products/2902993
03/22/2021Page5/9
Power supply unit-UNO-PS/1AC/24DC/100W-2902993
Technical data
EMC data
Frequency range 1 GHz ... 2 GHz
Test field strength 10 V/m
Frequency range 2 GHz ... 3 GHz
Test field strength 10 V/m
Comments Criterion A
Fast transients (burst) EN61000-4-4
Input 4 kV (Test Level 4 - asymmetrical)
Output 2 kV (Test Level 3 - asymmetrical)
Comments Criterion A
Surge voltage load (surge) EN61000-4-5
Input 2 kV (Test Level 3 - symmetrical)
4 kV (Test Level 4 - asymmetrical)
Output 1 kV (Test Level 2 - symmetrical)
2 kV (Test Level 1 - asymmetrical)
Comments Criterion B
Conducted interference EN61000-4-6
Frequency range 150 kHz ... 80 MHz
Voltage 10 V (Test Level 3)
Comments Criterion A
Voltage dips EN61000-4-11
Criterion A Normal operating behavior within the specified limits.
Criterion B Temporary impairment to operational behavior that is corrected by the
device itself.
Environmental Product Compliance
China RoHS Environmentally Friendly Use Period = 25;
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Block diagram
N
L
+
+
–
–
https://www.phoenixcontact.com/us/products/2902993
03/22/2021Page6/9
Power supply unit-UNO-PS/1AC/24DC/100W-2902993
Classifications
eCl@ss
eCl@ss 10.0.1 27040701
eCl@ss 11.0 27040701
eCl@ss 4.0 27040700
eCl@ss 4.1 27040700
eCl@ss 5.0 27049000
eCl@ss 5.1 27049000
eCl@ss 6.0 27049000
eCl@ss 7.0 27049002
eCl@ss 9.0 27040701
ETIM
ETIM 3.0 EC001039
ETIM 4.0 EC000599
ETIM 6.0 EC002540
ETIM 7.0 EC002540
UNSPSC
UNSPSC 6.01 30211502
UNSPSC 7.0901 39121004
UNSPSC 11 39121004
UNSPSC 12.01 39121004
UNSPSC 13.2 39121004
UNSPSC 18.0 39121004
UNSPSC 19.0 39121004
UNSPSC 20.0 39121004
UNSPSC 21.0 39121004
Approvals
Approvals
Approvals
UL Listed / UL Recognized / cUL Recognized / IECEE CB Scheme / cUL Listed / EAC / EAC / cULus Recognized / cULus Listed
Ex Approvals
UL Listed / cUL Listed / cULus Listed
https://www.phoenixcontact.com/us/products/2902993
03/22/2021Page7/9
Power supply unit-UNO-PS/1AC/24DC/100W-2902993
Approvals
Approval details
UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 123528
UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 214596
cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 214596
IECEE CB Scheme http://www.iecee.org/ DK-39228-A1-UL
cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 123528
EAC EAC-Zulassung
EAC RU*DE*08.B.01873/19
cULus Recognized
cULus Listed
https://www.phoenixcontact.com/us/products/2902993
03/22/2021Page8/9
Power supply unit-UNO-PS/1AC/24DC/100W-2902993
Accessories
Accessories
Device circuit breakers
Electronic circuit breaker-CBMC E4 24DC/1-4A NO-2906031
Multi-channel electronic circuit breaker for protecting four loads at 24 V DC in the event of overload and short circuit. With
electronic locking of the set nominal currents. For installation on DIN rails.
Electronic circuit breaker-CBMC E4 24DC/1-10A NO-2906032
Multi-channel electronic circuit breaker for protecting four loads at 24 V DC in the event of overload and short circuit. With
electronic locking of the set nominal currents. For installation on DIN rails.
Device protection
Type 3 surge protection device-PLT-SEC-T3-230-FM-UT-2907919
Type2/3 surge protection, consisting of protective plug and base element with screw connection. For single-phase power
supply network with integrated status indicator and remote signaling. Nominal voltage: 230VAC/DC
Type 3 surge protection device-PLT-SEC-T3-24-FM-UT-2907916
Type3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote
signaling for single-phase power supply networks. Nominal voltage: 24VAC/DC
Redundancy module
https://www.phoenixcontact.com/us/products/2902993
03/22/2021Page9/9
Power supply unit-UNO-PS/1AC/24DC/100W-2902993
Accessories
Redundancy module-UNO-DIODE/5-24DC/2X10/1X20-2905489
Redundancy module, 5 V - 24 V DC, 2 x 10 A, 1 x 20 A.
Phoenix Contact 2021 © - all rights reserved
http://www.phoenixcontact.com