KPT/KPSE CONNECTORS KP-7/1/2000 KPT/KPSE Miniature circular connectors Contents Introduction Introduction .................................................... 2 Standard Data ................................................ 3 Series KPT ...................................................... 4 Series KPSE ................................................... 6 Contact arrangements .................................... 9 The miniature circular connectors series KPT and KPSE from Cannon are manufactured acc. to MIL-C-26482 with three point bayonet coupling and five-keyway polarization.They offer general purpose solder connectors and high performance crimp connectors. The broad product range provides the most complete familiy of connectors conform to MIL-C-26482, NFC 93422 HE 301 model, VG 95328 and LN 29500 specifications. Wall mounting receptacles ............................ 13 Cable connecting plugs ................................. 14 Box mounting receptacles ............................. 15 Thru-bulkhead receptacles ............................. 15 Straight plugs ................................................ 16 Jam nut receptacles ...................................... 17 Right angle plugs .......................................... 18 Special versions Connectors with grounding continuity .......... 19 Receptacles with straight solder pins ........... 22 Panel cutouts ................................................ 24 Dummy receptacle ........................................ 25 Protective caps .............................................. 26 Tools .............................................................. 27 Assembly instructions ................................... 28 Cross reference lists ..................................... 29 Product safety information ............................ 31 2 The versatility of these connectors has been proven by their usage in general as well as in high performance environmental applications. In addition to the basic series presented in this catalogue, connectors for special applications are available. They include corrosion resistant types, filter connectors for electromagnetic compatability and non-outgasing, radiation resistant versions. All connectors conform to the above mentioned specifications are fully intermateable and accept a wide range of interchangeable accessories. Thereby design modifications can be achieved more easily and at lower cost with connectors of the KPT/KPSE series. Subject to change KPT/KPSE Miniature circular connectors Technical Data KPT KPSE Material and Finishes Shell Insulator Grommet and Seal Contacts Aluminum alloy, conductive olive drab chromate over cadmium finish per QQ-P-416 Polychloroprene Polychloroprene Polychloroprene Polychloroprene Copper alloy, gold plated Copper alloy, gold plated Mechanical Data Shell styles Shell sizes Polarisation/Coupling Service classes Water tightness Operating temperature Durability Vibration 00 - Wall mounting receptacle 01 - Cable connecting plug 02 - Box mounting receptacle 06 - Straight plug 8 thru 24 five keyways/three point bayonet A - General duty B - General duty with strain relief E - Grommet seal F - Grommet seal with strain relief 07 - Jam nut receptacle 08 - Plug with 90 termination assemblies B - Thru-bulkhead receptacle (KPT only) see also pages 5 and 8 Acc. to VG 95319 Part 2, Test No. 5.9.2 For styles A to E and J to W, Z1, Z2 and Z3 and gaskets style A and B only Test pressure 0,2 bar overpressure Test duration 48 h Test temperature 25 3C The connector shall be free of moisture - 55 / 125C min. 500 mating cycles 200 m/s2 at 10 to 2000 Hz Electrical Data Number of contacts Wire size AWG Contact termination 2 thru 61 16 thru 24 Solder Contact rating Size AWG 20 16 5000 M Rated current A 7,5 22,0 Test current A 7,5 13,0 Millivolt drop mV less than 55 less than 50 Test voltage Sea level Service class 1 2 1 2 Vrms 1500 2300 375 550 With scoop proof connectors operating voltages acc. to MIL-C-26482 and VG 96912 are permitted Insulation resistance Service rating Exception Service rating between the central contact and the housing of the coaxial contact 21336 m (70 000 ft.) Operating voltage Service class 1 2 Operating voltage and connector usage 3 thru 61 12 thru 24 Crimp VDC 2100 3200 535 770 VG 95328 140 VDC/100 VAC 165 VDC/115 VAC MIL-C-26482 850 VDC/600 VAC 1400 VDC/1000 VAC When the connectors in this catalogue are used for voltages greater than 50 Volts and have touchable conductive shell parts they must be used in accordance with the safety regulations DIN VDE Part 410; IEC 60364-4-41. This regulation basically dictates that the power source should be turned off before any mating and unmating of the connector, this regulation does not provide for protection against electrical shock when mating and unmating the connectors in the live condition. 3 KPT/KPSE Miniature circular connectors KPT General purpose solder contact connectors General purpose Solder termination Closed entry socket contacts Series KPT from Cannon offers general purpose connectors, qualified for use in military applications but also widely used in industrial applications calling for a circular connector with fixed contacts for solder termination. The KPT series is MIL-C-26482 approved and is intermateable with all connectors acc. to the above mentioned specifications. 4 Subject to change KPT/KPSE Miniature circular connectors KPT General purpose solder contact connectors How to order* KPT 02 E 22 - 36 P W * Series KPT - Cannon Prefix Shell style Cannon designation 00 - wall mounting receptacle 01 - cable connecting plug 02 - box mounting receptacle (class E only), not with contact arrangement 14A4 06 - straight plug 07 - jam nut receptacle (hermetic version also available) 08 - 90 angle plug B - thru-bulkhead receptacle (class E only) Class A - general duty with intermediate endbell B - general duty with strain relief (may be used for potting) E - with a grommet seal, not for 02 and 3112 (MS Spec) F - grommet seal with strain relief (MS Spec) Shell sizes 8, 10, 12, 14, 16, 18, 20, 22 und 24 Contact arrangement see page 9 - 11 Contact type P - pin S - socket Alternate insert position W, X, Y and Z (omit for normal) see page 12 Modification code A232 - Zinc Cobalt, black A233 - Zinc Cobalt, green DN - Shrink boot adapter for shell styles 00, 01, 06 and 07 DZ - Endbell for shielding braids and shrink boots. Class E will always be used for these modifications. Consult factory for other modifications. Omit first digit (0) of shell style indication when using a modification code. *Note: The above mentioned order reference explanation refers only to the Cannon ordering system. For other order references according to a specification, please consult the cross reference list on pages 29 - 30. 5 KPT/KPSE Miniature circular connectors KPSE High performance crimp contact connectors High performance Crimp termination Closed entry socket contacts Series KPSE environmental, miniature circular, quick disconnect connectors are designed for the exacting requirements of today's electronic industry. They are intermateable, intermountable and interchangeable with all connectors manufactured acc. to MIL-C-26482, LN 29500, VG 95328, NFC 93422 HE 301 and NFL 54125. Connectors of Cannon series KPSE have obtained the VDE Expertise No. 63761. 1 Standard MIL-C-26482 or NFL 54 125 Hardware mates with any connector designed to MIL-C-26 482, LN 29500 or NF L 54 125 or NF C 93 422, HE 301 model 2 Crimp, snap-in contacts are designed to MIL-C-23216 and can be crimped with the standard M22520/1 crimp tool. CLOSED-ENTRY SOCKET CONTACTS eliminate damage from abuse by test probes and help to correct any misaligned pins during engagement. CONTACT INSERTION is accomplished from the rear of the connector. When the contact is fully inserted, the clip tines snap securely behind the contact shoulder. CONTACT EXTRACTION is accomplished with a front-inserted extraction tool. Pressing the tool plunger pushes the contact out through the rear of the connector. 3 Monobloc insulator does not leave any access to moisture and avoids interfacial empty space. 6 4 Contact retaining clip is completely encased in a tough plastic wafer to protect the clip from damage. Complete moisture sealing is achieved by combining four seals: shell, peripheral, interfacial and wire seals. SHELL SEAL is effected when the plug shell pushes against the sealing ring in the receptacle when the connectors are mated. PERIPHERAL SEAL around the edge of the pin insulator is designed so that mating the connector puts tension on the seal and greatly reduces compression set. INTERFACIAL SEAL is achieved by the insulator faces meeting when the plug and receptacle are mated. WIRE SEAL is accomplished by a multiple ripple design, exceeding the wire sealing requirements of MIL-C-26482. 5 Positive insert-to-shell mechanical retention with hard plastic wafer firmly locked into a groove in the shell, in addition to a strong adhesive bond between the insert and shell. Subject to change KPT/KPSE Miniature circular connectors KPSE High performance crimp contact connectors How to order acc. to VG 95328 VG 95328 A 18 - 1 S N Specification Shell style A - wall mouting receptacle with straight endbell B - wall mounting receptacle with cable clamp C - box mounting receptacle D - jam nut receptacle E - jam nut receptacle with cable clamp J - straight plug with adapter DN K - straight plug with cable clamp M- straight plug, version DZ N - straight plug R - wall mounting receptacle, version DZ S - jam nut receptacle with adapter DN T - jam nut receptacle, version DZ Shell size 8, 10, 12, 14, 16, 18, 20, 22 und 24 Contact arrangement see pages 9 - 11 Contact type P - pin S - socket Alternate insert position see page 12 7 KPT/KPSE Miniature circular connectors KPSE High performance crimp contact connectors KPSE 00 E 18 - 32 P X * How to order Series KPSE - Cannon prefix MS - MIL-C-26482 prefix Shell style Cannon designation 00 - wall mounting receptacle 01 - cable connecting plug 02 - box mounting receptacle 06 - straight plug 07 - jam nut receptacle 08 - 90 angle plug MS designation 3120 - wall mounting receptacle 3121 - cable connecting plug 3122 - box mounting receptacle 3124 - jam nut receptacle 3126 - straight plug Class A - general duty (not MS approved) B - general duty with strain relief (not MS approved) E - grommet seal (MS specification) F - grommet seal with strain relief (MS specification) Shell style 8, 10, 12, 14, 16, 18, 20, 22 und 24 Contact arrangement see pages 9 - 11 Contact type P - pin S - socket Alternate insert position W, X, Y and Z (omit for normal), see page 12 Modification code A232 - Zinc Cobalt, black A233 - Zinc Cobalt, green DN - Shrink boot adapter for shell styles 00, 01, 06 and 07 DZ - Endbell for shielding braids and shrink boots. Class E will always be used for these modifications. Consult factory for other modifications. Omit first digit (0) of shell style indication when using a modification code. *Note: The above mentioned order reference explanation refers only to the Cannon ordering system. For other order references according to a specification, please consult the cross reference list on pages 29 - 30. 8 Subject to change KPT/KPSE Miniature circular connectors Contact Arrangements No. of contacts Contact arrangement Contact size AWG Service rating 2 8-2 20 1 58 122 - - 3 8-3 20 1 60 210 - - 3 8-3A 20 1 60 - - - 3 8-33 20 1 90 - - - 4 8-4 20 1 45 - - - 6 10-6 20 1 90 - - - 6 10-98 20 1 90 180 240 270 3 12-3 16 2 - - 180 - 8 12-8 20 1 90 112 203 292 10 12-10 20 1 60 155 270 295 5 14-5 16 2 40 92 184 273 12 14-12 20 (8) 16 (4) 1 43 90 - - Legend KPT KPSE Insulator position W X Y Z Insulator weight (g) including contacts pin socket LN29500 authorized per MIL-C-26482 authorized per VG95328 9 KPT/KPSE Miniature circular connectors Contact Arrangements No. of contacts Contact arrangement Contact size AWG Service rating Insulator position W X 15 14-15 20 (14) 16 (1) 1 17 110 155 234 19 14-19 1 20 30 165 315 - 5 14-22 12 (4) 20 (1) 1 - - - - 4 14A4 Coax RG188U 1 - - - - Y Z Insulator weight (g) including contacts pin socket (not for receptacles shell style 02) 8 16-8 16 2 54 152 180 331 23 16-23 20 (22) 16 (1) 1 158 270 - - 26 16-26 20 1 60 - 275 338 11 18-11 2 16 62 119 241 340 32 18-32 1 20 85 138 222 265 Legend KPT KPSE 10 LN29500 authorized per MIL-C-26482 authorized per VG95328 Subject to change KPT/KPSE Miniature circular connectors Contact Arrangements No. of contacts Contact arrangement Contact size AWG Service rating Insulator position W X Y Z Insulator weight (g) including contacts pin 16 20-16 2 16 238 316 333 347 5 20A6 12 90 180 270 - 2 socket Note: contacts are 1 grounding pin and 4 standard size 12 pins 24 20-24 20 1 70 145 215 290 39 20-39 20 (37) 16 (2) 1 63 114 252 333 41 20-41 1 20 45 126 225 - 21 22-21 16 2 16 135 175 349 36 22-36 20 1 72 144 216 288 41 22-41 20 (27) 16 (14) 39 135 264 - 30 142 226 314 55 1 2 22-55 1 20 Legend KPT KPSE LN29500 authorized per MIL-C-26482 authorized per VG95328 11 KPT/KPSE Miniature circular connectors Contact arrangements No. of contacts 61 Contact arrangement Contact size AWG Service rating 24-61 20 1 Insulator position W X Y Insulator weight (g) including contacts Z pin 90 180 270 socket 324 Legend KPT KPSE LN29500 authorized per MIL-C-26482 authorized per VG95328 Alternate Insert Position The diagram indicates alternate insert positions. The six positions N, V, W, Y, Z differ in degree of rotation for various sizes and arrangements. For the exact degree of rotation, for the list of contact arrangements and for alternate positions available, refer to the table at the right. Shell size Nbr. of contacts Contact arr. V W 8 2 3 3 3 4 6 6 3 8 10 4 5 5 12 15 19 8 23 26 11 32 5 16 24 39 41 21 36 41 55 61 8-2 8-3 8-3A 8-33 8-4 10-6 10-98 12-3 12-8 12-10 14A4 14-22 14-22 14-5 14-15 14-19 16-8 16-23 16-26 18-11 18-32 20A6* 20-16 20-24 20-39 20-41 22-21 22-36 22-41 22-55 24-61 - 58 60 60 90 45 90 90 90 60 40 43 17 30 54 158 60 62 85 90 238 70 63 45 16 72 39 30 90 10 12 14 16 18 20 22 24 Degree of rotation X Y 122 210 180 112 155 92 90 110 165 52 270 119 138 180 318 145 114 126 135 144 135 142 180 240 180 203 270 184 155 315 180 275 241 222 270 333 215 252 225 175 216 264 226 270 Z 270 292 295 273 234 331 338 340 265 347 290 333 349 288 314 324 * This contact arrangement features five contacts size 12. Four are standard contacts and one is a first-to-mate contact. 12 Subject to change KPT/KPSE Miniature circular connectors Wall mounting receptacles KPT00/MS3110 KPSE00/MS3120 Solder KPT00/MS3110 Crimp KPSE00/MS3120 Without termination assembly Shell size* 8 10 12 14 16 18 20 22 24 KPT/KPSE OA +0,03 -0,13 12,00 15,00 19,05 22,23 25,40 28,58 31,75 34,93 38,10 L max. 21,6 21,6 21,6 21,6 21,6 21,6 26,8 26,8 26,8 Q Thread Type 2A 7/16-28UNEF 9/16-24UNEF 11/16-24UNEF 13/16-20UNEF 15/16-20UNEF 1- 1/16-18UNEF 1- 3/16-18UNEF 1- 5/16-18UNEF 1- 7/16-18UNEF K 0,25 13,5 13,5 13,5 13,5 13,5 13,5 16,5 16,5 17,3 M 0,15 11,6 11,6 11,6 11,6 11,6 11,6 14,25 14,25 15,1 R 0,15 15,1 18,3 20,6 23,0 24,6 27,0 29,4 31,8 34,9 S max. 21,0 24,2 26,6 29,0 31,3 33,7 36,9 40,1 43,3 T 0,15 3,05 3,05 3,05 3,05 3,05 3,05 3,05 3,05 3,75 KPT Z max. 12,3 12,3 12,3 12,3 12,3 12,3 10,8 10,8 10,0 With termination assemblies Type A Shell size* 8 10 12 14 16 18 20 22 24 Shell size* 8 10 12 14 16 18 20 22 24 Typ A BA max. 15,0 18,2 21,2 24,6 27,7 30,9 33,9 37,1 40,3 DA min. 8,5 11,8 15,0 17,9 21,1 24,1 26,5 30,4 32,8 Type B or F LA max. 38,0 38,0 38,0 38,0 38,0 38,0 43,1 43,1 43,1 Type E BE max. 14,2 17,2 20,4 23,4 26,6 29,6 32,8 36,0 39,2 * See page 5, 7 and 8 for ordering number information V Thread Type 2A 1/2-28UNEF 5/8-24UNEF 3/4-20UNEF 7/8-20UNEF 1 -20UNEF 1-3/16-18UNEF 1-3/16-18UNEF 1-7/16 -18UNEF 1-7/16-18UNEF LE max. 32,5 32,5 32,5 32,5 32,5 32,5 34,5 34,5 34,5 in Type E Typ B and F BBF max. 14,0 17,2 20,4 23,6 26,7 29,5 32,7 35,9 39,0 C Thread 6-32 6-32 6-32 6-32 6-32 8-32 8-32 8-32 8-32 Mod. DN or F 185 D2 -0,5 15,6 18,4 23,7 24,5 29,8 32,0 36,1 38,5 41,6 Mod. DN or F 185 DBF min. 6,0 7,5 10,7 13,9 15,5 19,6 19,6 23,6 25,2 GBF min. 2,9 4,5 7,7 9,3 12,4 15,6 15,6 18,8 20,1 L1 max. 35,0 35,0 35,0 35,0 37,0 37,0 42,0 42,0 42,0 HBF max. 19,3 20,8 24,4 27,2 28,7 35,3 35,3 39,9 43,2 LBF max. 45,1 45,1 45,1 45,1 48,2 48,2 50,0 50,0 50,0 L2 0,5 12,2 12,2 12,2 12,2 14,5 14,5 15,8 15,8 14,9 series KPSE only contact arrangements 8-3A and 8-33 available 13 KPT/KPSE Miniature circular connectors Cable connecting plugs KPT01/MS3111 KPSE01/MS3121 Solder KPT01/MS3111 Crimp KPSE01/MS3121 Without termination assembly Shell size* 8 10 12 14 16 18 20 22 24 KPT/KPSE OA +0,03 -0,13 12,00 15,00 19,05 22,23 25,40 28,58 31,75 34,93 38,10 K 0,25 13,5 13,5 13,5 13,5 13,5 13,5 16,5 16,5 17,5 L max. 21,5 21,5 21,5 21,5 21,5 21,5 26,8 26,8 26,8 M 0,15 11,6 11,6 11,6 11,6 11,6 11,6 14,25 14,25 15,1 Q Thread Type 2A 7/16-28UNEF 9/16-24UNEF 11/16-24UNEF 13/16-20UNEF 15/16-20UNEF 1- 1/16-18UNEF 1- 3/16-18UNEF 1- 5/16-18UNEF 1- 7/16-18UNEF S max. 20,6 23,8 26,15 28,5 30,7 33,3 36,5 39,6 42,8 KPT Z max. 12,3 12,3 12,3 12,3 12,3 12,3 10,8 10,8 10,0 OY max. 23,8 26,9 29,3 31,7 34,1 36,5 39,6 42,8 46,0 With termination assemblies Type A Shell size* 8 10 12 14 16 18 20 22 24 Shell size* 8 10 12 14 16 18 20 22 24 Typ A BA max. 15,0 18,2 21,2 24,6 27,7 30,9 33,9 37,1 40,3 DA min. 8,5 11,8 15,0 17,9 21,1 24,1 26,5 30,4 32,8 LA max. 38,0 38,0 38,0 38,0 38,0 38,0 43,1 43,1 43,1 Type E BE max. 14,2 17,2 20,4 23,4 26,6 29,6 32,8 36,0 39,2 * See page 5, 7 and 8 for ordering number information 14 V Thread Type 2A 1/2-28UNEF 5/8-24UNEF 3/4-20UNEF 7/8-20UNEF 1 -20UNEF 1-3/16-18UNEF 1-3/16-18UNEF 1-7/16-18UNEF 1-7/16-18UNEF LE max. 32,5 32,5 32,5 32,5 32,5 32,5 34,5 34,5 34,5 Type B or F Type B and F BBF max. 14,0 17,2 20,4 23,6 26,7 29,5 32,7 35,9 39,0 Type E C Thread 6-32 6-32 6-32 6-32 6-32 8-32 8-32 8-32 8-32 Mod. DN or F 185 D2 -0,5 15,6 18,4 23,7 24,5 29,8 32,0 36,1 38,5 41,6 DBF min. 6,0 7,5 10,7 13,9 15,5 19,6 19,6 23,6 25,2 L1 max. 35,0 35,0 35,0 35,0 37,0 37,0 42,0 42,0 42,0 Mod. DN or F 185 GBF min. 2,9 4,5 7,7 9,3 12,4 15,6 15,6 18,8 20,1 HBF max. 19,3 20,8 24,4 27,2 28,7 35,3 35,3 39,9 43,2 LBF max. 46,0 46,0 46,0 46,0 49,0 49,0 51,1 51,1 51,1 L2 0,5 12,2 12,2 12,2 12,2 14,5 14,5 15,8 15,8 14,9 in series KPSE only contact arrangements 8-3A and 8-33 available Subject to change KPT/KPSE Miniature circular connectors Box mounting receptacles KPT02/MS3112 KPSE02/MS3122 Solder KPT02/MS3112 Crimp KPSE02/MS3122 Without termination assemblies Shell size* 8 10 12 14 16 18 20 22 24 KPT/KPSE OA +0,03 -0,13 12,00 15,00 19,05 22,23 25,40 28,58 31,75 34,93 38,10 L max. 21,1 21,1 21,1 21,1 21,1 21,1 22,7 22,7 22,7 * See page 5, 7 and 8 for ordering number information N max. 11,1 14,3 17,5 20,6 23,8 27,0 30,2 33,4 36,5 K 0,25 13,5 13,5 13,5 13,5 13,5 13,5 16,5 16,5 17,3 M 0,15 11,6 11,6 11,6 11,6 11,6 11,6 14,25 14,25 15,1 R 0,15 15,1 18,3 20,6 23,0 24,6 27,0 29,4 31,8 34,9 S max. 21,0 24,2 26,6 29,0 31,3 33,7 36,9 40,1 43,3 T 0,15 3,05 3,05 3,05 3,05 3,05 3,05 3,05 3,05 3,75 KPT Z max. 12,3 12,3 12,3 12,3 12,3 12,3 10,8 10,8 10,0 in series KPSE only contact arrangements 8-3A and 8-33 available Thru-bulkhead receptacles KPTB/MS3119 KPTB/MS3119 Receptacle assembly Shell size* 8 10 12 14 16 18 20 22 24 OA +0,03 -0,13 12,00 15,00 19,05 22,23 25,40 28,58 31,75 34,93 38,10 K 0,5 16,1 16,1 16,1 16,1 16,1 16,1 20,1 20,1 20,1 * See page 5, 7 and 8 for ordering number information L max. 28,6 28,6 28,6 28,6 28,6 28,6 31,9 31,9 31,9 M 0,25 14,5 14,5 14,5 14,5 14,5 14,5 17,7 17,7 17,7 T max. 6,0 6,0 6,0 6,0 6,0 6,0 9,2 9,2 8,0 R 0,15 15,1 18,3 20,6 23,0 24,6 27,0 29,4 31,8 34,9 S max. 21,0 24,2 26,6 29,0 31,3 33,7 36,9 40,1 43,3 X 0,15 3,05 3,05 3,05 3,05 3,05 3,05 3,05 3,05 3,75 in series KPSE only contact arrangements 8-3A and 8-33 available 15 KPT/KPSE Miniature circular connectors Straight plugs KPT06/MS3116 KPSE06/MS3126 Solder KPT06/MS3116 Crimp KPSE06/MS3126 Without termination assemblies KPT/KPSE G max. 19,8 23,6 26,5 30,1 33,2 35,4 39,0 42,1 45,2 Shell size* 8 10 12 14 16 18 20 22 24 J 0,15 9,1 9,1 9,1 9,1 9,1 9,1 10,7 10,7 10,7 L max. 21,4 21,4 21,4 21,4 21,4 21,4 25,1 25,1 25,1 KPT Z max. 16,3 16,3 16,3 16,3 16,3 16,3 15,0 15,0 15,0 Q Thread Thread Type 2A 7/16-28UNEF 9/16-24UNEF 11/16-24UNEF 13/16-20UNEF 15/16-20UNEF 1- 1/16-18UNEF 1- 3/16-18UNEF 1- 5/16-18UNEF 1- 7/16-18UNEF With termination assemblies Type A Shell size* 8 10 12 14 16 18 20 22 24 Shell size* 8 10 12 14 16 18 20 22 24 Type A BA max. 15,0 18,2 21,2 24,6 27,7 30,9 33,9 37,1 40,3 DA min. 8,5 11,8 15,0 17,9 21,1 24,1 26,5 30,4 32,8 LA max. 42,0 42,0 42,0 42,0 42,0 42,0 45,0 45,0 45,0 16 V Thread Type 2A 1/2-28UNEF 5/8-24UNEF 3/4-20UNEF 7/8-20UNEF 1 -20UNEF 1-3/16-18UNEF 1-3/16-18UNEF 1-7/16-18UNEF 1-7/16-18UNEF Type E BE max. 14,2 17,2 20,4 23,4 26,6 29,6 32,8 36,0 39,2 * See page 5, 7 and 8 for ordering number information Type B or F LE max. 32,5 32,5 32,5 32,5 32,5 32,5 34,5 34,5 34,5 Typ B and F BBF max. 14,0 17,2 20,4 23,6 26,7 29,5 32,7 35,9 39,0 Type E C Thread 6-32 6-32 6-32 6-32 6-32 8-32 8-32 8-32 8-32 Mod. DN or F 185 D2 -0,5 15,6 18,4 23,7 24,5 29,8 32,0 36,1 38,5 41,6 Mod. DN or F 185 DBF min. 6,0 7,5 10,7 13,9 15,5 19,6 19,6 23,6 25,2 L1 max. 35,0 35,0 35,0 35,0 37,0 37,0 42,0 42,0 42,0 GBF min. 2,9 4,5 7,7 9,3 12,4 15,6 15,6 18,8 20,1 HBF max. 19,3 20,8 24,4 27,2 28,7 35,3 35,3 39,9 43,2 LBF max. 46,0 46,0 46,0 46,0 49,0 49,0 49,0 49,0 49,0 L2 0,5 12,2 12,2 12,2 12,2 14,5 14,5 15,8 15,8 14,9 in series KPSE only contact arrangements 8-3A and 8-33 available Subject to change KPT/KPSE Miniature circular connectors Jam nut receptacle KPT07/MS3114 KPSE07/MS3124 Solder KPT07/MS3114 Type A Crimp KPSE07/MS3124 Without termination assemblies Shell size* 8 10 12 14 16 18 20 22 24 KPT/KPSE A +0,03 -0,13 12,0 15,0 19,05 22,23 25,40 28,58 31,75 34,93 38,10 F 0,15 13,3 16,5 20,6 23,8 26,9 30,1 33,3 36,5 39,6 H 0,15 19,0 22,2 27,0 30,2 33,3 36,5 39,7 42,9 46,0 K 0,25 3,2 3,2 3,2 3,2 3,2 3,2 4,0 4,0 4,0 M 0,15 17,7 17,7 17,7 17,7 17,7 17,7 22,5 22,5 23,3 R Thread Type 2A 9/16-24UNEF 11/16-24UNEF 7/8-20UNEF 1 -20UNEF 1- 1/8-18UNEF 1- 1/4-18UNEF 1- 3/8-18UNEF 1- 1/2-18UNEF 1- 5/8-18UNEF S 0,5 24,0 27,0 32,0 35,0 38,5 41,5 46,0 49,5 52,5 T Panel thickness min. max. 1,6 3,5 1,6 3,5 1,6 3,5 1,6 3,5 1,6 3,5 1,6 3,5 1,6 6,5 1,6 6,5 1,6 6,5 OY max. 28,0 31,0 36,0 39,0 42,0 45,0 50,0 55,0 57,0 KPT Z max. 7,9 7,9 7,9 7,9 7,9 7,9 4,7 4,7 3,8 With termination assemblies Type B or F Shell size* 8 10 12 14 16 18 20 22 24 Type B and F BBF max. 18,2 21,5 24,6 27,8 31,0 34,1 38,1 41,3 44,5 DBF min. 6,0 7,5 10,7 13,9 15,5 19,6 19,6 23,6 25,2 GBF min. 2,9 4,5 7,7 9,3 12,4 15,6 15,6 18,8 20,1 * See page 5, 7 and 8 for ordering number information HBF max. 19,3 20,8 24,2 27,2 28,7 35,3 35,3 39,8 43,2 Type E Type E LBF max. 44,9 44,9 44,9 44,9 48,4 48,4 50,3 50,3 50,3 BE max. 18,2 21,5 24,6 27,8 31,0 34,1 38,1 41,3 44,5 Type DN LE max. 33,5 33,5 33,5 33,5 33,5 33,5 39,0 39,0 39,0 Modification DN or F 185 L1 max. 43,0 43,0 43,0 43,0 45,5 45,5 52,6 52,6 51,6 L2 0,5 12,2 12,2 12,2 12,2 14,5 14,5 15,8 15,8 14,9 D2 max. 15,6 18,4 23,7 24,7 29,8 32,0 36,1 28,5 41,6 in series KPSE only contact arrangements 8-3A and 8-33 available 17 KPT/KPSE Miniature circular connectors Right angle plug, 90 KPT08 KPSE08 Solder KPT08 Crimp KPSE08 Without termination assemblies Shell size* 8 10 12 14 16 18 20 22 24 KPT/KPSE G max. 19,8 23,6 26,5 30,1 33,2 35,4 39,0 42,1 45,2 J 0,15 9,1 9,1 9,1 9,1 9,1 9,1 10,7 10,7 10,7 L max. 21,4 21,4 21,4 21,4 21,4 21,4 25,1 25,1 25,1 KPT Z max. 16,3 16,3 16,3 16,3 16,3 16,3 15,0 15,0 15,0 Q Thread Type 2A 7/16-28UNEF 9/16-24UNEF 11/16-24UNEF 13/16-20UNEF 15/16-20UNEF 1- 1/16-18UNEF 1- 3/16-18UNEF 1- 5/16-18UNEF 1- 7/16-18UNEF With termination assemblies Type A or E Shell size* 8 10 12 14 16 18 20 22 24 Typ A and E BAE max. 15,6 18,9 21,2 24,8 27,7 31,4 34,7 36,9 41,1 LAE max. 36,1 38,3 40,9 41,6 42,5 44,7 48,3 52,1 52,1 * See page 5, 7 and 8 for ordering number information 18 DAE max. 20,9 21,7 23,3 24,9 26,5 28,1 29,6 31,7 33,6 Type B or F V Thread Type 2A 1/2-28UNEF 5/8-24UNEF 3/4-20UNEF 7/8-20UNEF 1 -20UNEF 1-3/16-18UNEF 1-3/16-18UNEF 1-7/16-18UNEF 1-7/16-18UNEF Type B and F BBF max. 15,6 18,9 21,2 24,8 27,7 31,4 34,7 36,9 41,1 DBF max. 31,4 32,2 35,4 38,6 40,2 41,8 43,4 47,9 49,9 LBF max. 36,1 38,3 40,9 41,6 42,5 44,7 48,3 52,1 52,1 in series KPSE only contact arrangements 8-3A and 8-33 available Subject to change KPT/KPSE Miniature circular connectors Special versions with grounding continuity These connectors are designed to ensure electrical continuity at the cable shielding level (to protect it against radio frequency interferences) at the grounding level (if it is connected to the shielding). The plugs are manufactured with grounding fingers fixed to the front face of the shell. They make contact with the inner side of the receptacle shell. Plug and receptacle feature a special endbell which supports the cable shielding. The connectors are in accordance with the VG 95328 specification. Receptacle with grounding continuity (for shielded cable) KPT/KPSE 0E ... DZ Shell size* 8 10 12 14 16 18 20 22 24 A +0,03 -0,13 12,00 15,00 19,05 22,23 25,40 28,58 31,75 34,93 38,10 B min. 6,6 9,2 12,2 15,2 18,3 20,0 23,0 26,0 28,8 C +0,5 16,0 18,0 22,0 25,0 28,0 32,0 34,0 38,0 41,0 * See pages 5 and 8 for ordering number information D max. 13,3 16,1 20,0 22,2 26,2 28,5 32,5 34,8 37,9 E 1,00 15,0 15,0 17,0 18,0 18,0 18,0 18,0 18,0 18,0 K 0,25 13,5 13,5 13,5 13,5 13,5 13,5 16,5 16,5 17,3 L max. 52,0 52,0 52,0 53,0 53,0 53,0 58,0 58,0 58,0 M 0,15 11,6 11,6 11,6 11,6 11,6 11,6 14,25 14,25 15,1 R 0,15 15,1 18,3 20,6 23,0 24,6 27,0 29,4 31,7 34,9 S max. 21,0 24,2 26,6 29,0 31,3 33,7 36,9 40,1 43,3 OT 0,15 3,05 3,05 3,05 3,05 3,05 3,05 3,05 3,05 3,75 in series KPSE only contact arrangements 8-3A and 8-33 available 19 KPT/KPSE Miniature circular connectors Cable connecting plug with grounding continuity (for shielding cable) KPT/KPSE 1E ... DZ Shell size* 8 10 12 14 16 18 20 22 24 A +0,03 -0,13 12,00 15,00 19,05 22,23 25,40 28,58 31,75 34,93 38,10 B min. 6,6 9,2 12,2 15,2 18,3 20,0 23,0 26,0 28,8 C +0,50 16,0 18,0 22,0 25,0 28,0 32,0 34,0 38,0 41,0 * See pages 5 and 8 for ordering number information D max. 13,3 16,1 20,0 22,2 26,2 28,5 32,5 34,8 37,9 E 1,0 15,0 15,0 17,0 18,0 18,0 18,0 18,0 18,0 18,0 K 0,25 13,5 13,5 13,5 13,5 13,5 13,5 16,5 16,5 17,5 L max. 52,0 52,0 52,0 53,0 53,0 53,0 58,0 58,0 58,0 M 0,15 11,6 11,6 11,6 11,6 11,6 11,6 14,25 14,25 15,10 S max. 18,5 23,0 29,0 29,5 32,0 35,0 38,5 42,0 46,0 OY max. 21,0 24,2 26,6 29,0 31,3 33,7 36,9 40,1 43,3 in series KPSE only contact arrangements 8-3A and 8-33 available Straight plug with grounding continuity KPT/KPSE6E.DZ Shell size* 8 10 12 14 16 18 20 22 24 A min. 6,6 9,2 12,2 15,2 18,3 20,0 23,0 26,0 28,8 B +0,50 16,0 18,0 22,0 25,0 28,0 32,0 34,0 38,0 41,0 * See pages 5 and 8 for ordering number information 20 C max. 19,1 22,0 26,2 29,4 32,8 35,4 39,0 42,1 45,2 D max. 20,0 15,0 26,0 30,0 33,0 36,0 40,0 43,0 46,0 E 1,0 15,0 15,0 17,0 18,0 18,0 18,0 18,0 18,0 18,0 L max. 48,0 48,0 48,0 49,0 49,0 49,0 53,0 53,0 53,0 S 0,2 17,0 19,0 23,0 26,0 29,0 33,0 35,0 39,0 42,0 in series KPSE only contact arrangements 8-3A and 8-33 available Subject to change KPT/KPSE Miniature circular connectors Jam nut receptacle with grounding continuity (for shielding cable) KPT/KPSE 7E ... DZ Shell size* 8 10 12 14 16 18 20 22 24 OA min. 6,6 9,2 12,2 15,2 18,3 20,0 23,0 26,0 28,8 OB +0,50 16,0 18,0 22,0 25,0 28,0 32,0 34,0 38,0 41,0 * See pages 5 and 8 for ordering number information OC max. 18,2 21,4 24,6 27,8 30,9 34,1 38,1 41,3 44,4 D max. 13,3 16,1 20,0 22,2 26,2 28,5 32,5 34,8 37,9 E 1,0 15,0 15,0 17,0 18,0 18,0 18,0 18,0 18,0 18,0 L max. 47,0 47,0 49,0 50,0 50,0 50,0 55,0 55,0 55,0 S 0,25 23,0 27,0 31,7 34,9 38,1 41,3 46,0 49,2 52,3 T 0,25 19,0 22,2 27,0 30,2 33,3 36,5 39,7 42,9 46,0 in series KPSE only contact arrangements 8-3A and 8-33 available Assembly of a connector with a ground continuity endbell KPT/KPSE ... DZ Shell size* 8 10 12 14 16 18 20 22 24 A max. 6,6 9,2 12,2 152 18,3 20,0 23,0 26,0 28,8 B max. 8,0 10,0 14,0 17,0 20,0 24,0 27,0 30,0 33,0 * See pages 5 and 8 for ordering number information in series KPSE only contact arrangements 8-3A and 8-33 available 21 KPT/KPSE Miniature circular connectors Receptacles with straight solder pins How to order KPT 2 E 22 - 36 P W * Series KPT - Cannon prefix Shell type Cannon designation 2 - box mounting receptacle (only class E), not layout 14 A 4 7 - jam nut receptacle (hermetic version also available) Class A - general duty (shell type 7 only) E - with grommet seal, not for 02 and 3112 (MS-Spezification), only shell type 2 Shell size 8, 10, 12, 14, 16, 18, 20, 22 and 24 Contact arrangements see page 9 - 11 Contact type P - pin S - socket Alternate insert position W, X, Y and Z (omit for normal position) see page 12 Modification EW - solder pin 0,6 x 7 mm EX - solder pin 0,76 x 7 mm 22 Subject to change KPT/KPSE Miniature circular connectors Box mounting receptacle KPT 2* P/S** .*** Shell size 8 10 12 14 16 18 20 22 24 A +0,03 -0,13 12,00 15,00 19,05 22,23 25,40 28,58 31,75 34,93 38,10 K 0,25 13,50 13,50 13,50 13,50 13,50 13,50 16,50 16,50 17,30 L max. 21,1 21,1 21,1 21,1 21,1 21,1 22,7 22,7 22,7 M 0,15 11,60 11,60 11,60 11,60 11,60 11,60 14,25 14,25 15,10 N max. 11,10 14,30 17,50 20,60 23,80 27,00 30,20 33,40 36,50 R 0,15 15,10 18,30 20,60 23,00 24,60 27,00 29,40 31,70 34,90 S max. 21,00 24,20 26,60 29,00 31,30 33,70 36,90 40,10 43,30 OT 0,15 3,05 3,05 3,05 3,05 3,05 3,05 3,05 3,05 3,75 Order ref. see page 22 Jam nut receptacle KPT 7* P/S** .*** Shell size* 8 10 12 14 16 18 20 22 24 A +0,03 -0,13 12,00 15,00 19,05 22,23 25,40 28,58 31,75 34,93 38,10 F 0,15 13,3 16,5 20,6 23,8 26,9 30,1 33,3 36,5 39,6 H 0,15 19,0 22,2 27,0 30,2 33,3 36,5 39,7 42,9 46,0 K 0,25 3,2 3,2 3,2 3,2 3,2 3,2 4,0 4,0 4,0 M 0,15 17,7 17,7 17,7 17,7 17,7 17,7 22,5 22,5 23,3 R Thread Type 2 A 9/16-24UNEF 11/16-24UNEF 7/8-20UNEF 1- 20UNEF 1- 1/8-18UNEF 1- 1/4-18UNEF 1- 3/8-18UNEF 1- 1/2-18UNEF 1- 5/8-18UNEF S 0,5 24,0 27,0 32,0 35,0 38,5 41,5 46,0 49,5 52,5 Panel thickness min. 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 Y max. 28,0 31,0 36,0 39,0 42,0 45,0 50,0 55,0 57,0 Order ref. see page 22 23 KPT/KPSE Panel cutouts Miniature circular connectors Box and wall mounting receptacle Shell size 8 10 12 14 16 18 20 22 24 for rear mounting D +0,25 / -0 14 17 22 25 28 31 34,5 37,5 41 for front mounting D +0,25 / -0 12,7 16 19 22,2 25,5 28,5 31,7 35 38 R 0,15 15,1 18,3 20,6 23,0 24,6 27,0 29,4 31,8 34,9 Mounting hole diameter Shell size 8 10 12 14 16 18 20 22 24 KPT/KPSE T +0,3 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,6 rear mounting P - Panel thickness screw head height included 2,2 2,2 2,2 2,2 2,2 2,2 5,4 5,4 5,4 front mounting Jam nut receptacle Shell size 8 10 12 14 16 18 20 22 24 24 KPT/KPSE A +0,25 -0 14,5 17,7 22,7 25,7 28,8 32 35,1 38,4 41,5 B +0 -0,12 13,6 16,8 20,9 24,1 27,2 30,4 33,6 36,8 40 Subject to change KPT/KPSE Dummy receptacles Miniature circular connectors How to order KPT MS 15 8 3115 - 10 A A Series Dummy receptacle Shell size Flange A-Standard Shell size *8A * 10 A * 12 A * 14 A * 16 A * 18 A * 20 A * 22 A * 24 A A +0,03 -0,13 12,00 15,00 19,05 22,23 25,40 28,58 31,75 34,93 38,10 K 0,4 1,6 1,6 1,6 1,6 1,6 1,6 2,4 2,4 2,4 M 0,15 12,1 12,1 12,1 12,1 12,1 12,1 14,5 14,5 15,4 R 0,15 15,1 18,3 20,6 23,0 24,6 27,0 29,4 31,8 34,9 S max. 21,0 24,2 26,6 29,0 31,3 33,7 36,9 40,1 43,3 OT 0,15 3,05 3,05 3,05 3,05 3,05 3,05 3,05 3,05 3,75 * Add KPT 15 or MS 3115 prefixes 25 KPT/KPSE Protective Miniature circular connectors caps 80 - for plugs cap with nylon cord D / preferred type Mater ial and finishes Protective cap Aluminum alloy Sash chain Stainless steel Cord Polyamide Ring Stainless steel Clip Aluminum alloy Gasket Fluor Silicone Endlink / rivet Stainless steel, passivated Bayonet pin Stainless steel, passivated Finishes A232 Zinc cobalt, black A233 Zinc cobalt, green A66 Olive drab chromate over cadmium How to order KPT80 - 10 D - A34 MS3180 - 10 Series KPT80 - for plug KPT81 - for receptacle 81 - for receptacles cap with nylon cord D / preferred type Shell size 8 - 24 Termination D - Preferred type: with nylon cord and end link clip and end link attached C - sash chain N - sash chain with ring (81 only) Modification A232 - Zinc cobalt, black A233 - Zinc cobalt, green without code = A66 - oliv drab chromate over cadmium VG95328 - Z2 C 10 VG Specification Shell Style Z1 - for receptacle Z2 - for plug 8 10 12 14 16 18 20 22 24 Termination C - with nylon cord and end link clip and end link attached Shell size 8 - 24 A size 18,26 21,44 25,40 28,58 31,75 34,92 38,10 41,28 44,45 L1 max 19,84 19,84 19,84 19,84 19,84 19,84 21,44 21,44 22,22 B max. 18,0 20,3 25,1 28,2 31.5 34,5 37,8 40,9 44,2 L2 max. 21,44 21,44 21,44 21,44 21,44 21,44 21,44 21,44 22,22 H max. 76 76 89 89 89 89 101 101 101 N 14,7 17,9 22,6 25,8 29,0 32,2 35,3 38,5 41,7 Crimp tool for clips upon request KPT 80 - for plugs cap with sash chain C or N 26 KPT 81 - for receptacles cap with sash chain C or N Subject to change KPT/KPSE Tools and Accessories Crimp tools Insertion/Extraction tool Miniature circular connectors KPSE Tool Designation Hand crimp tool M22520/1-01 Crimp machine WA27F-CE Crimp machine HACS * for contact sizes 20, 16, 12 Order ref. 995-0001-585 121586-5067 HACS Locator* M22520/1-02 M22520/1-02 - Order ref. 995-0001-736 995-0001-736 - Test gage M22520/3-1 M22520/3-1 - Order ref. 995-0001-684 995-0001-684 - Order ref. 995-0001-965 995-0001-965 995-0001-964 995-0001-966 LN W0,6LN29500 W0,6LN29500 W1,2LN29500 - KPSE Contact size Insertion tool Order ref. Old designation 20* 038894-0018 CIT-20-16 20** M24256A20 995-0001-950 CIT-20-5A 16 M24256A16 995-0001-951 CIT-16-1 12 M24256A12 995-0001-913 * without insulation support ** with insulation support Extraction tool MS2425R20 MS2425R20 MS2425R16 MS2425R12 KPT14A4 Contact type Coaxial Contacts Insertion tool - Order ref. - Old designation - Extraction tool CET-C6B Order ref. 070064-0000 LN - KPSE/VG 95328 Contact size Contact type 20 Socket with insulation support Pin with insulation support Socket Pin Socket Pin Grounding pin 16 12 Contact order ref. KPSE version 031-8704-203 VG 95328 version 031-8704-203 430-8560-006 430-8560-006 031-8704-000 430-8560-004 031-8704-012 430-8560-016 430-8560-020 031-8704-000 430-8560-004 KPT14A4 Coaxial Wire hole fillers/Grommet sealing plugs DM 53740-5001 DM 53742-5001 KPSE Contact size 20 16 12 Coaxial 14A4 Flange gaskets Pin Socket Colour code Red Blue Yellow Yellow MS MS3187A20 MS3187-16A MS3187-12 - Order ref. - LN BL0,6LN 29500 BL1,2LN 29500 - Cannon 225-1012-000 225-1011-000 225-0072-000 225-0018-000 KPSE Shell size 8 10 12 14 16 Alu-Flex conductive 075-8543-000 075-8543-001 075-8543-002 075-8543-003 075-8543-004 Chloroprene non conductive 075-8543-010 075-8543-011 075-8543-012 075-8543-013 075-8543-014 Shell size 18 20 22 24 Alu-Flex conductive 075-8543-005 075-8543-006 075-8543-007 075-8543-008 Chloroprene non conductive 075-8543-015 075-8543-016 075-8543-017 075-8543-018 27 KPT/KPSE Contact size 20 16 12 14A4 Coax Cable size mm2 (AWG) 0,93-0,21 (20-24) 1,91-0,60 (16-20) 3,18-1,91 (12-14) RG179B/u Assembly Miniature circularInstructions connectors Strip insulation 5,0 mm 6,5 mm 6,5 mm Crimping contacts 1. Strip wires according to the table above taking care not to cut or nick strands. 2. Insert stripped wire into contact crimp pot. Wire must be visible thru inspection hole. 3. Using correct crimp tool and locator, cycle the tool once to be sure the indentors are open. Insert contact and wire into locator. Squeeze tool handles firmly and completely to insure a proper crimp. The tool will not release unless the crimp indentors in the tool head have been fully actuated. 4. Release crimped contact and wire from tool. Be certain the wire is visible thru inspection hole in contact. Contact insertion 5. Remove hardware from plug and receptacle. Slide hardware over wire bundle in proper order for reassembly. 6. Use the proper contact insertion tool, and slide the tool over the terminal end of the contact. The size 16 contact lies in the tool and the tool tip butts against the contact shoulder. The rear, or insulation support, of the size 20 contact butts against an internal shoulder in the tool tip. 7. Beginning from center cavity and working outwards, insert wired contacts into rear of connector by hand until the front of the contact shoulder is no more than 1/8" from the grommet. Holding the connector securely, position tool behind contact. Push tool straight into contact cavity until contact snaps into position. A light pull on wire will assure that contact is locked securely. Repeat for remaining contacts. 8. Use wire hole fillers or grommet sealing plugs to fill any empty cavities and assemble hardware to rear of plug or receptacle. Completion 9. Check face of plug or receptacle for proper contact installation. 11. Use the proper extraction tool. There are two lines on the clip sleeve which are vital to the contact removal process. The first index line is used for removing pin contacts while the second index line is for removing socket contacts. Carefully place the tool tip over the contact to be extracted until the tool tip touches the insulator face. Carefully rotate the tool until the index line is slightly below the insulator face. Keep an even pressure against tool body; push plunger forward with thumb and index finger; and push the contact out through the clip. Carefully remove extraction tool from connector. Pull the wire by hand to complete the removal of the contact. Contact extraction 10. Slide hardware back over wire bundle. Using proper extraction tool or extraction end of proper insertion/ extraction tool, proceed as follows: Please ask for our detailed Assembly Instruction 28 Subject to change KPT/KPSE Miniature circular connectors Cross Reference List KPT/MIL-C-26482, NFL 54125, VG 95328 Part No. KPT Cannon KPT00B*-*** KPT00B*-*** KPT00E*-*** KPT00F*-*** KPT0E*-***DN KPT0E*-***DZ KPT01A*-*** KPT01B*-*** KPT01E*-*** KPT01F*-*** KPT1E*-***DN KPT06A*-*** KPT06B*-*** KPT06E*-*** KPT06F*-*** KPT06G*-*** KPT1E*-***DZ Part No. MIL-26482 MS3110E*-*** MS3110E*-*** Part No. NFL 54125 25100A*-***50 25100AC*-***50 25100E*-***50 25100EC*-***50 MS3111E*-*** MS3111F*-*** 25101A*-***50 25101AC*-***50 25101E*-***50 25101EC*-***50 MS3116E*-*** MS3116F*-*** Part No. VG 95328 Part No. LN 29500 25106A*-***50 25106AC*-***50 25106E*-***50 25106EC*-***50 25106J*-***50 25102E*-***50Y11* 25107A*-***50Y11* KPT6A*-***88 KPT6E*-***DN KPT6E*-***DZ KPT02E*-*** KPT07A*-*** KPT07E*-*** KPT07F*-*** KPT08E*-*** KPT08F*-*** KPT7E*-***DN KPTB*-*** MS3112E*-*** MS3114E*-*** MS3114F*-*** 25102E*-***50 25107A*-***50 25107E*-***50 25107EC*-***50 H*-***VG 95328 25108EC*-***50 MS3119E*-*** 251B*-*** Please note: Connectors acc. to VG 95328 and Cannon connectors series KPSE use different contacts - see page 27 Cross Reference List Protective Caps Part No. Cannon KPT80 KPT80...C KPT81 KPT81...C KPT81...N Part No. MIL-C-26482 MS 3180 Part No. NFL 54125 Part No. VG95328 Part No. LN 29500 Z 2...VG 95328 MS 3181 Z 1...VG 95328 MS 3181...N 29 KPT/KPSE Miniature circular connectors Cross Reference List KPSE/MIL-C-26482, NFL 54125, VG95328 Part No. KPSE Cannon KPSE00A*-*** KPSE00B*-*** KPSE00E*-*** KPSE00F*-*** KPSE0E*-***DZ KPSE0E*-***DN KSPE01A*-*** KPSE01B*-*** KPSE01E*-*** KPSE01F*-*** KPSE*-***DN KPSE02E*-*** KPSE06A*-*** KPSE06B*-*** KPSE06E*-*** KPSE06F*-*** KPSE6A*-***88 KPSE6E*-***88 KPSE6E*-***DN KPSE6E*-***DZ KPSE07A*-*** KPSE1E*-***DZ KPSE7E*-***DN KPSE07E*-*** KPSE07F*-*** KPSE08E*-*** KPSE08F*-*** KPSE7E*-***DZ Part No. MIL-C-26482 Part No. NFL 54-125 25100RA*-***50 Part No. VG 95328 MS3120E*-*** MS3120F*-*** 25100R*-***50 25100RC*-***50 A*-***VG 95328 B*-***VG 95328 R*-***VG 95328 25101RA*-***50 MS3121E*-*** MS3121F*-*** 25101R*-***50 25101RC*-***50 MS3122E*-*** 25102R*-***50 25106RA*-***50 MS3126E*-*** MS3126F*-*** 25106R*-*** 25106RC*-***50 C*-***VG 95328 K*-***VG 95328 N*-***VG 95328 J*-***VG 9532 M*-***VG 95328 25107RA*-***50 MS3124E*-*** MS3124F*-*** 25107R*-***50 25107RC*-***50 S*-***VG 95328 D*-***VG 95328 E*-***VG 95328 25108RC*-***50 T*-***VG 95328 Please note: Connectors acc. to VG 95328 and Cannon connectors series KPSE use different contacts - see page 27 30 Subject to change KPT/KPSE Miniature circular connectors Product Safety Information THIS NOTE SHOULD BE READ IN CONJUNCTION WITH THE PRODUCT DATA SHEET/CATALOGUE. FAILURE TO OBSERVE THE ADVICE IN THIS INFORMATION SHEET AND THE OPERATING CONDITIONS SPECIFIED IN THE PRODUCT DATA SHEET/ CATALOGUE COULD RESULT IN HAZARDOUS SITUATIONS. 1. MATERIAL CONTENT AND PHYSICAL FORM Electrical connectors do not usually contain hazardous materials. They contain conducting and non-conducting materials and can be divided into two groups. a) Printed circuit types and low cost audio types which employ all plastic insulators and casings. b) Rugged, Fire Barrier and High Reliability types with metal casings and either natural rubber, synthetic rubber, plastic or glass insulating materials. Contact materials vary with type of connector and also application and are usually manufactured from either copper, copper alloys, nickel, alumel, chromel or steel. In special applications, other alloys may be specified. 2. FIRE CHARACTERISTICS AND ELECTRIC SHOCK HAZARD There is no fire hazard when the connector is correctly wired and used within the specified parameters. Incorrect wiring or assembly of the connector or careless use of metal tools or conductive fluids, or transit damage to any of the component parts may cause electric shock or burns. Live circuits must not be broken by separating mated connectors as this may cause arcing, ionisation and burning. Heat dissipation is greater at maximum resistance in a circuit. Hot spots may occur when resistance is raised locally by damage, e.g. cracked or deformed contacts, broken strands of wire. Local overheating may also result from the use of the incorrect application tools or from poor quality soldering or slack screw terminals. Overheating may occur if the ratings in the Product Data Sheet/ Catalogue are exceeded and can cause breakdown of insulation and hence electric shock. If heating is allowed to continue it intensifies by further increasing the local resistance through loss of temper of spring contacts, formation of oxide film on contacts and wires, and leakage currents through carbonisation of insulation and tracking paths. Fire can then result in the presence of combustible materials and this may release noxious fumes. Overheating may not be visually apparent. Burns may result from touching overheated components. 3. HANDLING Care must be taken to avoid damage to any component parts of electrical connectors during installation and use. Although there are normally no sharp edges, care must be taken when handling certain components to avoid injury to fingers. Electrical connectors may be damaged in transit to the customers, and damage may result in creation of hazards. Products should therefore be examined prior to installation/use and rejected if found to be damaged. 4. DISPOSAL Incineration of certain materials may release noxious or even toxic fumes. 5. APPLICATION Connectors with exposed contacts should not be selected for use on the current supply side of an electrical circuit, because an electric shock could result from touching exposed contacts on an unmated connector. Voltages in excess of 30 V ac or 42.5 V dc are potentially hazardous and care should be taken to ensure that such voltages can not be transmitted in any way to exposed metal parts of the connector body. The connector and wiring should be checked, before making live, to have no damage to metal parts or insulators, no solder blobs, loose strands, conducting lubricants, swarf, or any other undesired conducting particles. Insulation resistance should be checked to make certain that no low resistance joints or spurious conducting path are existing between contacts and exposed metal parts of the connector body. Further the contact resistance of the connectors should be measured within the electrical circuit in order to identify high resistances which result in excessive connector heating. Always use the correct application tools as specified in the Data Sheet/Catalogue. Do not permit untrained personnel to wire, assemble or tramper with connectors. For operation voltage please see appropriate national regulations. IMPORTANT GENERAL INFORMATION. 1. Air and creepage paths/Operating voltage The admissible operating voltages depend on the individual applications and the valid national and other applicable safety regulations. For this reason the air and creepage path data are only reference values. Observe reduction of air and creepage paths due to PC board and/or harnessing. 2. Temperature All information given are temperature limits. The operation temperature depends on the individual application. 3. Other important information Cannon continuously endeavours to improve their products. Therefore, Cannon products may deviate from the description, technical data and shape as shown in this catalogue and data sheets. 4. Harnessing and Assembly Instructions If applicable, our special harnessing and/or assembly instruction has to be adhered to. This is provided at request. ITT Cannon, a division of ITT Industries, Inc. manufactures the highest quality products available in the marketplace; however these products are intended to be used in accordance with the specifications in this catalog. Any use or application that deviates from stated operating specifications is not recommended and may be unsafe. No information and data contained in this catalog shall be construed to create any liability on the part of Cannon. Any new issue of this catalog shall automatically invalidate and supersede any and all previous issues. A limited warranty applies to Cannon products. Except for obligations assumed by Cannon under this warranty, Cannon shall not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether or not based on express or implied warranty, contract, negligence or strict liability arising in connection with the design, manufacture, sale, use or repair of the products. Product availability, prices and delivery dates are exclusively subject to our respective order confirmation form; the same applies to orders based on development samples delivered. This catalog is not to be construed as an offer. It is intended merely as an invitation to make an offer. By this publication, Cannon does not assume responsibility or any liability for any patent infringements or other rights of third parties which may result from its use. Reprinting this catalog is generally permitted, indicating the source. However, Cannon's prior consent must be obtained in all cases. Cannon is a trademark of ITT Industries, Inc 31