KPT/KPSE
CONNECTORS
KP-7/1/2000
KPT/KPSE Miniature circular connectors
Subject to change
2
Contents
Introduction .................................................... 2
Standard Data ................................................ 3
Series KPT ...................................................... 4
Series KPSE ................................................... 6
Contact arrangements .................................... 9
Wall mounting receptacles ............................ 13
Cable connecting plugs ................................. 14
Box mounting receptacles ............................. 15
Thru-bulkhead receptacles ............................. 15
Straight plugs ................................................ 16
Jam nut receptacles ...................................... 17
Right angle plugs .......................................... 18
Special versions
Connectors with grounding continuity .......... 19
Receptacles with straight solder pins ........... 22
Panel cutouts ................................................ 24
Dummy receptacle ........................................ 25
Protective caps .............................................. 26
T ools .............................................................. 27
Assembly instructions ................................... 28
Cross reference lists ..................................... 29
Product safety information ............................ 31
Introduction
The miniature circular connectors series KPT
and KPSE from Cannon are manufactured acc.
to MIL-C-26482 with three point bayonet
coupling and five-keyway polarization.They offer
general purpose solder connectors and high
performance crimp connectors. The broad
product range provides the most complete
familiy of connectors conform to MIL-C-26482,
NFC 93422 HE 301 model, VG 95328 and LN
29500 specifications.
The versatility of these connectors has been
proven by their usage in general as well as in
high performance environmental applications.
In addition to the basic series presented in this
catalogue, connectors for special applications
are available. They include corrosion resistant
types, filter connectors for electromagnetic
compatability and non-outgasing, radiation
resistant versions.
All connectors conform to the above mentioned
specifications are fully intermateable and accept
a wide range of interchangeable accessories.
Thereby design modifications can be achieved
more easily and at lower cost with connectors
of the KPT/KPSE series.
KPT/KPSE Miniature circular connectors
3
Technical Data
KPT KPSE
Material and Finishes
Shell Aluminum alloy, conductive olive drab chromate over cadmium finish per QQ-P-416
Insulator Polychloroprene Polychloroprene
Grommet and Seal Polychloroprene Polychloroprene
Contacts Copper alloy, gold plated Copper alloy, gold plated
Mechanical Data
Shell styles 00 – Wall mounting receptacle 07 – Jam nut receptacle
01 – Cable connecting plug 08 – Plug with 90° termination assemblies
02 – Box mounting receptacle B – Thru-bulkhead receptacle (KPT only)
06 – Straight plug
Shell sizes 8 thru 24
Polarisation/Coupling five keyways/three point bayonet
Service classes A – General duty see also pages 5 and 8
B – General duty with strain relief
E – Grommet seal
F – Grommet seal with strain relief
Water tightness Acc. to VG 95319 Part 2, Test No. 5.9.2
For styles A to E and J to W, Z1, Z2 and Z3 and gaskets style A and B only
Test pressure 0,2 bar overpressure Test duration 48 h
Test temperature 25 ± 3°C The connector shall be free of moisture
Operating temperature – 55 / 125°C
Durability min. 500 mating cycles
Vibration 200 m/s2 at 10 to 2000 Hz
Electrical Data
Number of contacts 2 thru 61 3 thru 61
Wire size AWG 16 thru 24 12 thru 24
Contact termination Solder Crimp
Contact rating Size AWG Rated current A Test current A Millivolt drop mV
20 7,5 7,5 less than 55
16 22,0 13,0 less than 50
Insulation resistance ≈ 5000 MΩ
Service rating Test voltage Service class Vrms VDC With scoop proof connectors
Sea level 1 1500 2100 operating voltages
2 2300 3200 acc. to MIL-C-26482 and
21336 m 1 375 535 VG 96912 are
(70 000 ft.) 2 550 770 permitted
Operating voltage
Service class VG 95328 MIL-C-26482
1 140 VDC/100 VAC 850 VDC/600 VAC
2 165 VDC/115 VAC 1400 VDC/1000 VAC
Exception
Service rating between the
central contact and the housing
of the coaxial contact
When the connectors in this catalogue are used for voltages greater than 50 Volts and have touchable conductive
shell parts they must be used in accordance with the safety regulations DIN VDE Part 410; IEC 60364-4-41.
This regulation basically dictates that the power sour ce should be turned off before any mating and unmating of
the connector , this regulation does not provide for protection against electrical shock when mating and unmating
the connectors in the live condition.
Operating voltage and connector usage
KPT/KPSE Miniature circular connectors
Subject to change
4
KPT General purpose solder contact connectors
●General purpose
●Solder termination
●Closed entry socket contacts
Series KPT from Cannon offers general purpose
connectors, qualified for use in military appli-
cations but also widely used in industrial applica-
tions calling for a circular connector with fixed
contacts for solder termination.
The KPT series is MIL-C-26482 approved and
is intermateable with all connectors acc. to the
above mentioned specifications.
KPT/KPSE Miniature circular connectors
5
KPT 02 E 22 - 36 P W *
Series
KPT – Cannon Prefix
Shell style
Cannon designation
00 – wall mounting receptacle
01 – cable connecting plug
02 – box mounting receptacle (class E only), not with
contact arrangement 14A4
06 – straight plug
07 – jam nut receptacle (hermetic version also available)
08 – 90° angle plug
B – thru-bulkhead receptacle (class E only)
Class
A–general duty with intermediate endbell
B–general duty with strain relief
(may be used for potting)
E–with a grommet seal, not for 02 and 3112 (MS Spec)
F–grommet seal with strain relief (MS Spec)
Shell sizes
8, 10, 12, 14, 16, 18, 20, 22 und 24
Contact arrangement
see page 9 – 11
Contact type
P –pin
S –socket
Alternate insert position
W, X, Y and Z (omit for normal)
see page 12
Modification code
A232 – Zinc Cobalt, black
A233 – Zinc Cobalt, green
DN – Shrink boot adapter for shell styles 00, 01, 06 and 07
DZ – Endbell for shielding braids and shrink boots.
Class E will always be used for these modifications.
Consult factory for other modifications. Omit first digit (0) of shell
style indication when using a modification code.
*Note:
The above mentioned order reference explanation refers only to the Cannon
ordering system. For other order references according to a specification,
please consult the cross reference list on pages 29 – 30.
KPT General purpose solder contact connectors
How to order*
KPT/KPSE Miniature circular connectors
Subject to change
6
KPSE High performance crimp contact connectors
●High performance
●Crimp termination
●Closed entry socket contacts
Series KPSE environmental, miniature circular,
quick disconnect connectors are designed for
the exacting requirements of today’s electronic
industry.
They are intermateable, intermountable and
interchangeable with all connectors manufac-
tured acc. to MIL-C-26482, LN 29500, VG
95328, NFC 93422 HE 301 and NFL 54125.
Connectors of Cannon series KPSE have obtain-
ed the VDE Expertise No. 63761.
4 Contact retaining clip
is completely encased in a tough plastic wafer to
protect the clip from damage.
Complete moisture sealing
is achieved by combining four seals: shell,
peripheral, interfacial and wire seals.
SHELL SEAL
is effected when the plug shell pushes against the
sealing ring in the receptacle when the connectors
are mated.
PERIPHERAL SEAL
around the edge of the pin insulator is designed so
that mating the connector puts tension on the seal
and greatly reduces compression set.
INTERFACIAL SEAL
is achieved by the insulator faces meeting when
the plug and receptacle are mated.
WIRE SEAL
is accomplished by a multiple ripple design, exceed-
ing the wire sealing requirements of MIL-C-26482.
5 Positive insert-to-shell mechanical retention
with hard plastic wafer firmly locked into a groove
in the shell, in addition to a strong adhesive bond
between the insert and shell.
1 Standard MIL-C-26482 or NFL 54 125 Hardware
mates with any connector designed to MIL-C-26 482,
LN 29500 or NF L 54 125 or NF C 93 422, HE 301
model
2 Crimp, snap-in contacts
are designed to MIL-C-23216 and can be crimped
with the standard M22520/1 crimp tool.
CLOSED-ENTRY SOCKET CONTACTS
eliminate damage from abuse by test probes and
help to correct any misaligned pins during enga-
gement.
CONTACT INSERTION
is accomplished from the rear of the connector.
When the contact is fully inserted, the clip tines snap
securely behind the contact shoulder.
CONTACT EXTRACTION
is accomplished with a front-inserted extraction
tool. Pressing the tool plunger pushes the contact
out through the rear of the connector.
3 Monobloc insulator
does not leave any access to moisture and avoids
interfacial empty space.
KPT/KPSE Miniature circular connectors
7
VG 95328 A 18 - 1 S N
Specification
Shell style
A–wall mouting receptacle with straight endbell
B–wall mounting receptacle with cable clamp
C–box mounting receptacle
D–jam nut receptacle
E–jam nut receptacle with cable clamp
J–straight plug with adapter DN
K–straight plug with cable clamp
M–straight plug, version DZ
N–straight plug
R–wall mounting receptacle, version DZ
S–jam nut receptacle with adapter DN
T–jam nut receptacle, version DZ
Shell size
8, 10, 12, 14, 16, 18, 20, 22 und 24
Contact arrangement
see pages 9 – 11
Contact type
P–pin
S–socket
Alternate insert position
see page 12
How to order acc. to VG 95328
KPSE High performance crimp contact connectors
KPT/KPSE Miniature circular connectors
Subject to change
8
KPSE 00 E 18 - 32 P X *
Series
KPSE – Cannon prefix
MS – MIL-C-26482 prefix
Shell style
Cannon designation MS designation
00 – wall mounting receptacle 3120 – wall mounting receptacle
01 – cable connecting plug 3121 – cable connecting plug
02 – box mounting receptacle 3122 – box mounting receptacle
06 – straight plug 3124 – jam nut receptacle
07 – jam nut receptacle 3126 – straight plug
08 – 90° angle plug
Class
A–general duty (not MS approved)
B–general duty with strain relief (not MS approved)
E–grommet seal (MS specification)
F–grommet seal with strain relief (MS specification)
Shell style
8, 10, 12, 14, 16, 18, 20, 22 und 24
Contact arrangement
see pages 9 – 11
Contact type
P –pin
S –socket
Alternate insert position
W, X, Y and Z (omit for normal), see page 12
Modification code
A232 – Zinc Cobalt, black
A233 – Zinc Cobalt, green
DN – Shrink boot adapter for shell styles 00, 01, 06 and 07
DZ – Endbell for shielding braids and shrink boots.
Class E will always be used for these modifications.
Consult factory for other modifications. Omit first digit (0) of shell style
indication when using a modification code.
*Note:
The above mentioned order reference explanation refers only to the Cannon ordering
system. For other order references according to a specification, please consult the
cross reference list on pages 29 – 30.
How to order
KPSE High performance crimp contact connectors
KPT/KPSE Miniature circular connectors
9
Contact Arrangements
No. of Contact Service Insulator position Insulator weight (g)
contacts arrangement rating W X Y Z including contacts
Contact size
AWG pin socket
28-2 1 58 122 - -
20
38-3 1 60 210 - -
20
38-3A 160---
20
38-33 190---
20
48-4 145---
20
610-6 190---
20
610-98 1 90 180 240 270
20
312-3 2 - - 180 -
16
812-8 1 90 112 203 292
20
10 12-10 1 60 155 270 295
20
514-5 2 40 92 184 273
16
12 14-12 143 90--
20 (8)
16 (4)
Legend
KPT KPSE LN29500 authorized per MIL-C-26482 authorized per VG95328
KPT/KPSE Miniature circular connectors
Subject to change
10
Contact Arrangements
No. of Contact Service Insulator position Insulator weight (g)
contacts arrangement rating W X Y Z including contacts
Contact size
AWG pin socket
15 14-15 1 17 110 155 234
20 (14)
16 (1)
19 14-19 1 30 165 315 -
20
514-22 1----
12 (4)
20 (1)
414A4 1----
Coax RG188U
(not for receptacles shell style 02)
816-8 2 54 152 180 331
16
23 16-23 1 158 270 - -
20 (22)
16 (1)
26 16-26 1 60 - 275 338
20
11 18-11 2 62 119 241 340
16
32 18-32 1 85 138 222 265
20
Legend
KPT KPSE LN29500 authorized per MIL-C-26482 authorized per VG95328
KPT/KPSE Miniature circular connectors
11
Contact Arrangements
No. of Contact Service Insulator position Insulator weight (g)
contacts arrangement rating W X Y Z including contacts
Contact size
AWG pin socket
16 20-16 2 238 316 333 347
16
520A6 2 90 180 270 -
12
Note: contacts are 1 grounding pin and 4 standard size 12 pins
24 20-24 1 70 145 215 290
20
39 20-39 1 63 114 252 333
20 (37)
16 (2)
41 20-41 1 45 126 225 -
20
21 22-21 2 16 135 175 349
16
36 22-36 1 72 144 216 288
20
41 22-41 39 135 264 -
20 (27) 1
16 (14) 2
55 22-55 1 30 142 226 314
20
Legend
KPT KPSE LN29500 authorized per MIL-C-26482 authorized per VG95328
KPT/KPSE Miniature circular connectors
Subject to change
12
Shell Nbr. of Contact Degree of rotation
size contacts arr. V W X Y Z
8 2 8-2 - 58 122 - -
3 8-3 - 60 210 - -
3 8-3A - 60 - - -
3 8-33 - 90 - - -
4 8-4 - 45 - - -
10 6 10-6 - 90 - - -
6 10-98 - 90 180 240 270
12 3 12-3 - - 180 -
8 12-8 - 90 112 203 292
10 12-10 - 60 155 270 295
14 4 14A4 - - - - -
5 14-22 - - - - -
5 14-22 - 40 92 184 273
12 14-5 - 43 90 - -
15 14-15 - 17 110 155 234
19 14-19 - 30 165 315 -
16 8 16-8 - 54 52 180 331
23 16-23 - 158 270 - -
26 16-26 - 60 - 275 338
18 11 18-11 - 62 119 241 340
32 18-32 - 85 138 222 265
20 5 20A6* - 90 180 270 -
16 20-16 - 238 318 333 347
24 20-24 - 70 145 215 290
39 20-39 - 63 114 252 333
41 20-41 - 45 126 225 -
22 21 22-21 - 16 135 175 349
36 22-36 - 72 144 216 288
41 22-41 - 39 135 264 -
55 22-55 - 30 142 226 314
24 61 24-61 - 90 180 270 324
* This contact arrangement features five contacts size 12. Four are standard contacts and one is a first-to-mate contact.
Alternate Insert Position
The diagram indicates alternate insert positions.
The six positions N, V, W, Y, Z differ in degree of
rotation for various sizes and arrangements. For
the exact degree of rotation, for the list of contact
arrangements and for alternate positions
available, refer to the table at the right.
Contact arrangements
No. of Contact Service Insulator position Insulator weight (g)
contacts arrangement rating W X Y Z including contacts
Contact size
AWG pin socket
61 24-61 1 90 180 270 324
20
Legend
KPT KPSE LN29500 authorized per MIL-C-26482 authorized per VG95328
KPT/KPSE Miniature circular connectors
13
Without termination assembly
KPT/KPSE KPT
Shell Ø ALQ KMRSTZ
size* +0,03 -0,13 max. Thread Type 2A ±0,25 ±0,15 ±0,15 max. ±0,15 max.
◆8 12,00 21,6 7/16-28UNEF 13,5 11,6 15,1 21,0 3,05 12,3
10 15,00 21,6 9/16-24UNEF 13,5 11,6 18,3 24,2 3,05 12,3
12 19,05 21,6 11/16-24UNEF 13,5 11,6 20,6 26,6 3,05 12,3
14 22,23 21,6 13/16-20UNEF 13,5 11,6 23,0 29,0 3,05 12,3
16 25,40 21,6 15/16-20UNEF 13,5 11,6 24,6 31,3 3,05 12,3
18 28,58 21,6 1- 1/16-18UNEF 13,5 11,6 27,0 33,7 3,05 12,3
20 31,75 26,8 1- 3/16-18UNEF 16,5 14,25 29,4 36,9 3,05 10,8
22 34,93 26,8 1- 5/16-18UNEF 16,5 14,25 31,8 40,1 3,05 10,8
24 38,10 26,8 1- 7/16-18UNEF 17,3 15,1 34,9 43,3 3,75 10,0
Type E Mod. DN or F 185
Shell BELED2 L1 L2
size* max. max. -0,5 max. ±0,5
◆8 14,2 32,5 15,6 35,0 12,2
10 17,2 32,5 18,4 35,0 12,2
12 20,4 32,5 23,7 35,0 12,2
14 23,4 32,5 24,5 35,0 12,2
16 26,6 32,5 29,8 37,0 14,5
18 29,6 32,5 32,0 37,0 14,5
20 32,8 34,5 36,1 42,0 15,8
22 36,0 34,5 38,5 42,0 15,8
24 39,2 34,5 41,6 42,0 14,9
* See page 5, 7 and 8 for ordering number information ◆ in series KPSE only contact arrangements 8-3A and 8-33 available
With termination assemblies
Type A Type B or F Type E Mod. DN or F 185
Typ A Typ B and F
Shell BADALAVB
BF CD
BF GBF HBF LBF
size* max. min. max. Thread T ype 2A max. Thread min. min. max. max.
◆8 15,0 8,5 38,0 1/2-28UNEF 14,0 6-32 6,0 2,9 19,3 45,1
10 18,2 11,8 38,0 5/8-24UNEF 17,2 6-32 7,5 4,5 20,8 45,1
12 21,2 15,0 38,0 3/4-20UNEF 20,4 6-32 10,7 7,7 24,4 45,1
14 24,6 17,9 38,0 7/8-20UNEF 23,6 6-32 13,9 9,3 27,2 45,1
16 27,7 21,1 38,0 1 -20UNEF 26,7 6-32 15,5 12,4 28,7 48,2
18 30,9 24,1 38,0 1-3/16-18UNEF 29,5 8-32 19,6 15,6 35,3 48,2
20 33,9 26,5 43,1 1-3/16-18UNEF 32,7 8-32 19,6 15,6 35,3 50,0
22 37,1 30,4 43,1 1-7/16 -18UNEF 35,9 8-32 23,6 18,8 39,9 50,0
24 40,3 32,8 43,1 1-7/16-18UNEF 39,0 8-32 25,2 20,1 43,2 50,0
Crimp
KPSE00/MS3120
Solder
KPT00/MS3110
Wall mounting receptacles
KPT00/MS3110 KPSE00/MS3120
KPT/KPSE Miniature circular connectors
Subject to change
14
Without termination assembly
KPT/KPSE KPT
Shell Ø AK L MQ SØ YZ
size* +0,03 -0,13 ±0,25 max. ±0,15 Thread Type 2A max. max. max.
◆8 12,00 13,5 21,5 11,6 7/16-28UNEF 20,6 23,8 12,3
10 15,00 13,5 21,5 11,6 9/16-24UNEF 23,8 26,9 12,3
12 19,05 13,5 21,5 11,6 11/16-24UNEF 26,15 29,3 12,3
14 22,23 13,5 21,5 11,6 13/16-20UNEF 28,5 31,7 12,3
16 25,40 13,5 21,5 11,6 15/16-20UNEF 30,7 34,1 12,3
18 28,58 13,5 21,5 11,6 1- 1/16-18UNEF 33,3 36,5 12,3
20 31,75 16,5 26,8 14,25 1- 3/16-18UNEF 36,5 39,6 10,8
22 34,93 16,5 26,8 14,25 1- 5/16-18UNEF 39,6 42,8 10,8
24 38,10 17,5 26,8 15,1 1- 7/16-18UNEF 42,8 46,0 10,0
Type E Mod. DN or F 185
Shell BELED2 L1 L2
size* max. max. -0,5 max. ±0,5
◆8 14,2 32,5 15,6 35,0 12,2
10 17,2 32,5 18,4 35,0 12,2
12 20,4 32,5 23,7 35,0 12,2
14 23,4 32,5 24,5 35,0 12,2
16 26,6 32,5 29,8 37,0 14,5
18 29,6 32,5 32,0 37,0 14,5
20 32,8 34,5 36,1 42,0 15,8
22 36,0 34,5 38,5 42,0 15,8
24 39,2 34,5 41,6 42,0 14,9
* See page 5, 7 and 8 for ordering number information ◆ in series KPSE only contact arrangements 8-3A and 8-33 available
Type A Type B or F Type E Mod. DN or F 185
With termination assemblies
Typ A Type B and F
Shell BADALAVB
BF CD
BF GBF HBF LBF
size* max. min. max. Thread Type 2A max. Thread min. min. max. max.
◆8 15,0 8,5 38,0 1/2-28UNEF 14,0 6-32 6,0 2,9 19,3 46,0
10 18,2 11,8 38,0 5/8-24UNEF 17,2 6-32 7,5 4,5 20,8 46,0
12 21,2 15,0 38,0 3/4-20UNEF 20,4 6-32 10,7 7,7 24,4 46,0
14 24,6 17,9 38,0 7/8-20UNEF 23,6 6-32 13,9 9,3 27,2 46,0
16 27,7 21,1 38,0 1 -20UNEF 26,7 6-32 15,5 12,4 28,7 49,0
18 30,9 24,1 38,0 1-3/16-18UNEF 29,5 8-32 19,6 15,6 35,3 49,0
20 33,9 26,5 43,1 1-3/16-18UNEF 32,7 8-32 19,6 15,6 35,3 51,1
22 37,1 30,4 43,1 1-7/16-18UNEF 35,9 8-32 23,6 18,8 39,9 51,1
24 40,3 32,8 43,1 1-7/16-18UNEF 39,0 8-32 25,2 20,1 43,2 51,1
Cable connecting plugs
KPT01/MS3111 KPSE01/MS3121
Solder
KPT01/MS3111 Crimp
KPSE01/MS3121
KPT/KPSE Miniature circular connectors
15
Without termination assemblies
KPT/KPSE KPT
Shell Ø ALNKMRSTZ
size* +0,03 -0,13 max. max. ±0,25 ±0,15 ±0,15 max. ±0,15 max.
◆8 12,00 21,1 11,1 13,5 11,6 15,1 21,0 3,05 12,3
10 15,00 21,1 14,3 13,5 11,6 18,3 24,2 3,05 12,3
12 19,05 21,1 17,5 13,5 11,6 20,6 26,6 3,05 12,3
14 22,23 21,1 20,6 13,5 11,6 23,0 29,0 3,05 12,3
16 25,40 21,1 23,8 13,5 11,6 24,6 31,3 3,05 12,3
18 28,58 21,1 27,0 13,5 11,6 27,0 33,7 3,05 12,3
20 31,75 22,7 30,2 16,5 14,25 29,4 36,9 3,05 10,8
22 34,93 22,7 33,4 16,5 14,25 31,8 40,1 3,05 10,8
24 38,10 22,7 36,5 17,3 15,1 34,9 43,3 3,75 10,0
* See page 5, 7 and 8 for ordering number information ◆ in series KPSE only contact arrangements 8-3A and 8-33 available
Receptacle assembly
Shell Ø AKL MTRSX
size* +0,03 -0,13 ±0,5 max. ±0,25 max. ±0,15 max. ±0,15
◆8 12,00 16,1 28,6 14,5 6,0 15,1 21,0 3,05
10 15,00 16,1 28,6 14,5 6,0 18,3 24,2 3,05
12 19,05 16,1 28,6 14,5 6,0 20,6 26,6 3,05
14 22,23 16,1 28,6 14,5 6,0 23,0 29,0 3,05
16 25,40 16,1 28,6 14,5 6,0 24,6 31,3 3,05
18 28,58 16,1 28,6 14,5 6,0 27,0 33,7 3,05
20 31,75 20,1 31,9 17,7 9,2 29,4 36,9 3,05
22 34,93 20,1 31,9 17,7 9,2 31,8 40,1 3,05
24 38,10 20,1 31,9 17,7 8,0 34,9 43,3 3,75
* See page 5, 7 and 8 for ordering number information ◆ in series KPSE only contact arrangements 8-3A and 8-33 available
Box mounting receptacles
KPT02/MS3112 KPSE02/MS3122
KPTB/MS3119
Crimp
KPSE02/MS3122
Solder
KPT02/MS3112
Thru-bulkhead receptacles
KPTB/MS3119
KPT/KPSE Miniature circular connectors
Subject to change
16
Without termination assemblies
KPT/KPSE KPT
Shell G J L Q Thread Z
size* max. ±0,15 max. Thread Type 2A max.
◆8 19,8 9,1 21,4 7/16-28UNEF 16,3
10 23,6 9,1 21,4 9/16-24UNEF 16,3
12 26,5 9,1 21,4 11/16-24UNEF 16,3
14 30,1 9,1 21,4 13/16-20UNEF 16,3
16 33,2 9,1 21,4 15/16-20UNEF 16,3
18 35,4 9,1 21,4 1- 1/16-18UNEF 16,3
20 39,0 10,7 25,1 1- 3/16-18UNEF 15,0
22 42,1 10,7 25,1 1- 5/16-18UNEF 15,0
24 45,2 10,7 25,1 1- 7/16-18UNEF 15,0
With termination assemblies
Type A Typ B and F
Shell BADALAVB
BF CD
BF GBF HBF LBF
size* max. min. max. Thread Type 2A max. Thread min. min. max. max.
◆8 15,0 8,5 42,0 1/2-28UNEF 14,0 6-32 6,0 2,9 19,3 46,0
10 18,2 11,8 42,0 5/8-24UNEF 17,2 6-32 7,5 4,5 20,8 46,0
12 21,2 15,0 42,0 3/4-20UNEF 20,4 6-32 10,7 7,7 24,4 46,0
14 24,6 17,9 42,0 7/8-20UNEF 23,6 6-32 13,9 9,3 27,2 46,0
16 27,7 21,1 42,0 1 -20UNEF 26,7 6-32 15,5 12,4 28,7 49,0
18 30,9 24,1 42,0 1-3/16-18UNEF 29,5 8-32 19,6 15,6 35,3 49,0
20 33,9 26,5 45,0 1-3/16-18UNEF 32,7 8-32 19,6 15,6 35,3 49,0
22 37,1 30,4 45,0 1-7/16-18UNEF 35,9 8-32 23,6 18,8 39,9 49,0
24 40,3 32,8 45,0 1-7/16-18UNEF 39,0 8-32 25,2 20,1 43,2 49,0
Type A Type B or F Type E Mod. DN or F 185
Type E Mod. DN or F 185
Shell BELED2 L1 L2
size* max. max. -0,5 max. ±0,5
◆8 14,2 32,5 15,6 35,0 12,2
10 17,2 32,5 18,4 35,0 12,2
12 20,4 32,5 23,7 35,0 12,2
14 23,4 32,5 24,5 35,0 12,2
16 26,6 32,5 29,8 37,0 14,5
18 29,6 32,5 32,0 37,0 14,5
20 32,8 34,5 36,1 42,0 15,8
22 36,0 34,5 38,5 42,0 15,8
24 39,2 34,5 41,6 42,0 14,9
* See page 5, 7 and 8 for ordering number information ◆ in series KPSE only contact arrangements 8-3A and 8-33 available
Straight plugs
KPT06/MS3116 KPSE06/MS3126
Solder
KPT06/MS3116 Crimp
KPSE06/MS3126
KPT/KPSE Miniature circular connectors
17
Without termination assemblies
KPT/KPSE KPT
Shell A F H K M R S T Panel thickness Ø YZ
size* +0,03 -0,13 ±0,15 ±0,15 ±0,25 ±0,15 Thread Type 2A ±0,5 min. max. max. max.
◆8 12,0 13,3 19,0 3,2 17,7 9/16-24UNEF 24,0 1,6 3,5 28,0 7,9
10 15,0 16,5 22,2 3,2 17,7 11/16-24UNEF 27,0 1,6 3,5 31,0 7,9
12 19,05 20,6 27,0 3,2 17,7 7/8-20UNEF 32,0 1,6 3,5 36,0 7,9
14 22,23 23,8 30,2 3,2 17,7 1 -20UNEF 35,0 1,6 3,5 39,0 7,9
16 25,40 26,9 33,3 3,2 17,7 1- 1/8-18UNEF 38,5 1,6 3,5 42,0 7,9
18 28,58 30,1 36,5 3,2 17,7 1- 1/4-18UNEF 41,5 1,6 3,5 45,0 7,9
20 31,75 33,3 39,7 4,0 22,5 1- 3/8-18UNEF 46,0 1,6 6,5 50,0 4,7
22 34,93 36,5 42,9 4,0 22,5 1- 1/2-18UNEF 49,5 1,6 6,5 55,0 4,7
24 38,10 39,6 46,0 4,0 23,3 1- 5/8-18UNEF 52,5 1,6 6,5 57,0 3,8
Jam nut receptacle
KPT07/MS3114 KPSE07/MS3124
Type B and F Type E Type DN
Shell BBF DBF GBF HBF LBF BELE L1L2D2
size* max. min. min. max. max. max. max. max. ±0,5 max.
◆8 18,2 6,0 2,9 19,3 44,9 18,2 33,5 43,0 12,2 15,6
10 21,5 7,5 4,5 20,8 44,9 21,5 33,5 43,0 12,2 18,4
12 24,6 10,7 7,7 24,2 44,9 24,6 33,5 43,0 12,2 23,7
14 27,8 13,9 9,3 27,2 44,9 27,8 33,5 43,0 12,2 24,7
16 31,0 15,5 12,4 28,7 48,4 31,0 33,5 45,5 14,5 29,8
18 34,1 19,6 15,6 35,3 48,4 34,1 33,5 45,5 14,5 32,0
20 38,1 19,6 15,6 35,3 50,3 38,1 39,0 52,6 15,8 36,1
22 41,3 23,6 18,8 39,8 50,3 41,3 39,0 52,6 15,8 28,5
24 44,5 25,2 20,1 43,2 50,3 44,5 39,0 51,6 14,9 41,6
* See page 5, 7 and 8 for ordering number information ◆ in series KPSE only contact arrangements 8-3A and 8-33 available
With termination assemblies
Type B or F Type E Modification DN or F 185
Solder
KPT07/MS3114 Type A Crimp
KPSE07/MS3124
KPT/KPSE Miniature circular connectors
Subject to change
18
Without termination assemblies
KPT/KPSE KPT
Shell G J L Q Z
size* max. ±0,15 max. Thread Type 2A max.
◆8 19,8 9,1 21,4 7/16-28UNEF 16,3
10 23,6 9,1 21,4 9/16-24UNEF 16,3
12 26,5 9,1 21,4 11/16-24UNEF 16,3
14 30,1 9,1 21,4 13/16-20UNEF 16,3
16 33,2 9,1 21,4 15/16-20UNEF 16,3
18 35,4 9,1 21,4 1- 1/16-18UNEF 16,3
20 39,0 10,7 25,1 1- 3/16-18UNEF 15,0
22 42,1 10,7 25,1 1- 5/16-18UNEF 15,0
24 45,2 10,7 25,1 1- 7/16-18UNEF 15,0
Type A or E Type B or F
Typ A and E Type B and F
Shell BAE LAE DAE VB
BF DBF LBF
size* max. max. max. Thread Type 2A max. max. max.
◆8 15,6 36,1 20,9 1/2-28UNEF 15,6 31,4 36,1
10 18,9 38,3 21,7 5/8-24UNEF 18,9 32,2 38,3
12 21,2 40,9 23,3 3/4-20UNEF 21,2 35,4 40,9
14 24,8 41,6 24,9 7/8-20UNEF 24,8 38,6 41,6
16 27,7 42,5 26,5 1 -20UNEF 27,7 40,2 42,5
18 31,4 44,7 28,1 1-3/16-18UNEF 31,4 41,8 44,7
20 34,7 48,3 29,6 1-3/16-18UNEF 34,7 43,4 48,3
22 36,9 52,1 31,7 1-7/16-18UNEF 36,9 47,9 52,1
24 41,1 52,1 33,6 1-7/16-18UNEF 41,1 49,9 52,1
* See page 5, 7 and 8 for ordering number information ◆ in series KPSE only contact arrangements 8-3A and 8-33 available
Right angle plug, 90°
KPT08 KPSE08
Solder
KPT08 Crimp
KPSE08
With termination assemblies
KPT/KPSE Miniature circular connectors
19
Shell A B C D E K L M R S ØT
size* +0,03 -0,13 min. +0,5 max. 1,00 ±0,25 max. ±0,15 ±0,15 max. ±0,15
◆8 12,00 6,6 16,0 13,3 15,0 13,5 52,0 11,6 15,1 21,0 3,05
10 15,00 9,2 18,0 16,1 15,0 13,5 52,0 11,6 18,3 24,2 3,05
12 19,05 12,2 22,0 20,0 17,0 13,5 52,0 11,6 20,6 26,6 3,05
14 22,23 15,2 25,0 22,2 18,0 13,5 53,0 11,6 23,0 29,0 3,05
16 25,40 18,3 28,0 26,2 18,0 13,5 53,0 11,6 24,6 31,3 3,05
18 28,58 20,0 32,0 28,5 18,0 13,5 53,0 11,6 27,0 33,7 3,05
20 31,75 23,0 34,0 32,5 18,0 16,5 58,0 14,25 29,4 36,9 3,05
22 34,93 26,0 38,0 34,8 18,0 16,5 58,0 14,25 31,7 40,1 3,05
24 38,10 28,8 41,0 37,9 18,0 17,3 58,0 15,1 34,9 43,3 3,75
* See pages 5 and 8 for ordering number information ◆ in series KPSE only contact arrangements 8-3A and 8-33 available
These connectors are designed to ensure
electrical continuity
●at the cable shielding level
(to protect it against radio frequency
interferences)
●at the grounding level
(if it is connected to the shielding).
The plugs are manufactured with grounding
fingers fixed to the front face of the shell. They
make contact with the inner side of the receptacle
shell.
Plug and receptacle feature a special endbell
which supports the cable shielding. The
connectors are in accordance with the VG 95328
specification.
Receptacle with grounding continuity (for shielded cable)
KPT/KPSE 0E ... DZ
Special versions with grounding continuity
KPT/KPSE Miniature circular connectors
Subject to change
20
Shell A B C D E K L M S Ø Y
size* +0,03 -0,13 min. +0,50 max. ±1,0 ±0,25 max. ±0,15 max. max.
◆8 12,00 6,6 16,0 13,3 15,0 13,5 52,0 11,6 18,5 21,0
10 15,00 9,2 18,0 16,1 15,0 13,5 52,0 11,6 23,0 24,2
12 19,05 12,2 22,0 20,0 17,0 13,5 52,0 11,6 29,0 26,6
14 22,23 15,2 25,0 22,2 18,0 13,5 53,0 11,6 29,5 29,0
16 25,40 18,3 28,0 26,2 18,0 13,5 53,0 11,6 32,0 31,3
18 28,58 20,0 32,0 28,5 18,0 13,5 53,0 11,6 35,0 33,7
20 31,75 23,0 34,0 32,5 18,0 16,5 58,0 14,25 38,5 36,9
22 34,93 26,0 38,0 34,8 18,0 16,5 58,0 14,25 42,0 40,1
24 38,10 28,8 41,0 37,9 18,0 17,5 58,0 15,10 46,0 43,3
* See pages 5 and 8 for ordering number information ◆ in series KPSE only contact arrangements 8-3A and 8-33 available
Shell A B C D E L S
size* min. +0,50 max. max. ±1,0 max. ±0,2
◆8 6,6 16,0 19,1 20,0 15,0 48,0 17,0
10 9,2 18,0 22,0 15,0 15,0 48,0 19,0
12 12,2 22,0 26,2 26,0 17,0 48,0 23,0
14 15,2 25,0 29,4 30,0 18,0 49,0 26,0
16 18,3 28,0 32,8 33,0 18,0 49,0 29,0
18 20,0 32,0 35,4 36,0 18,0 49,0 33,0
20 23,0 34,0 39,0 40,0 18,0 53,0 35,0
22 26,0 38,0 42,1 43,0 18,0 53,0 39,0
24 28,8 41,0 45,2 46,0 18,0 53,0 42,0
* See pages 5 and 8 for ordering number information ◆ in series KPSE only contact arrangements 8-3A and 8-33 available
Cable connecting plug with grounding continuity (for shielding cable)
KPT/KPSE 1E ... DZ
Straight plug with grounding continuity
KPT/KPSE6E.DZ
KPT/KPSE Miniature circular connectors
21
Shell Ø A Ø B Ø CD E L ST
size* min. +0,50 max. max. 1,0 max. ±0,25 ±0,25
◆8 6,6 16,0 18,2 13,3 15,0 47,0 23,0 19,0
10 9,2 18,0 21,4 16,1 15,0 47,0 27,0 22,2
12 12,2 22,0 24,6 20,0 17,0 49,0 31,7 27,0
14 15,2 25,0 27,8 22,2 18,0 50,0 34,9 30,2
16 18,3 28,0 30,9 26,2 18,0 50,0 38,1 33,3
18 20,0 32,0 34,1 28,5 18,0 50,0 41,3 36,5
20 23,0 34,0 38,1 32,5 18,0 55,0 46,0 39,7
22 26,0 38,0 41,3 34,8 18,0 55,0 49,2 42,9
24 28,8 41,0 44,4 37,9 18,0 55,0 52,3 46,0
* See pages 5 and 8 for ordering number information ◆ in series KPSE only contact arrangements 8-3A and 8-33 available
Assembly of a connector with a ground continuity endbell
KPT/KPSE ... DZ
Shell ± A ± B
size* max. max.
◆8 6,6 8,0
10 9,2 10,0
12 12,2 14,0
14 152 17,0
16 18,3 20,0
18 20,0 24,0
20 23,0 27,0
22 26,0 30,0
24 28,8 33,0
* See pages 5 and 8 for ordering number information ◆ in series KPSE only contact arrangements 8-3A and 8-33 available
Jam nut receptacle with grounding continuity (for shielding cable)
KPT/KPSE 7E ... DZ
KPT/KPSE Miniature circular connectors
Subject to change
22
Series
KPT – Cannon prefix
Shell type
Cannon designation
2 – box mounting receptacle (only class E),
not layout 14 A 4
7 – jam nut receptacle
(hermetic version also available)
Class
A – general duty (shell type 7 only)
E – with grommet seal, not for 02 and
3112 (MS-Spezification), only shell type 2
Shell size
8, 10, 12, 14, 16, 18, 20, 22 and 24
Contact arrangements
see page 9 – 11
Contact type
P – pin
S – socket
Alternate insert position
W, X, Y and Z (omit for normal position)
see page 12
Modification
EW – solder pin 0,6 x 7 mm
EX – solder pin 0,76 x 7 mm
How to order
KPT 2 E 22 - 36 P W *
Receptacles with straight solder pins
KPT/KPSE Miniature circular connectors
23
Box mounting receptacle
KPT 2* P/S** .***
Jam nut receptacle
KPT 7* P/S** .***
Shell A K L M N R S Ø T
size +0,03 -0,13 ±0,25 max. ±0,15 max. ±0,15 max. ±0,15
8 12,00 13,50 21,1 11,60 11,10 15,10 21,00 3,05
10 15,00 13,50 21,1 11,60 14,30 18,30 24,20 3,05
12 19,05 13,50 21,1 11,60 17,50 20,60 26,60 3,05
14 22,23 13,50 21,1 11,60 20,60 23,00 29,00 3,05
16 25,40 13,50 21,1 11,60 23,80 24,60 31,30 3,05
18 28,58 13,50 21,1 11,60 27,00 27,00 33,70 3,05
20 31,75 16,50 22,7 14,25 30,20 29,40 36,90 3,05
22 34,93 16,50 22,7 14,25 33,40 31,70 40,10 3,05
24 38,10 17,30 22,7 15,10 36,50 34,90 43,30 3,75
Order ref. see page 22
Shell A F H K M R S Panel thickness Y
size* +0,03 -0,13 ±0,15 ±0,15 ±0,25 ±0,15 Thread Type 2 A ±0,5 min. max.
8 12,00 13,3 19,0 3,2 17,7 9/16-24UNEF 24,0 1,6 28,0
10 15,00 16,5 22,2 3,2 17,7 11/16-24UNEF 27,0 1,6 31,0
12 19,05 20,6 27,0 3,2 17,7 7/8-20UNEF 32,0 1,6 36,0
14 22,23 23,8 30,2 3,2 17,7 1- 20UNEF 35,0 1,6 39,0
16 25,40 26,9 33,3 3,2 17,7 1- 1/8-18UNEF 38,5 1,6 42,0
18 28,58 30,1 36,5 3,2 17,7 1- 1/4-18UNEF 41,5 1,6 45,0
20 31,75 33,3 39,7 4,0 22,5 1- 3/8-18UNEF 46,0 1,6 50,0
22 34,93 36,5 42,9 4,0 22,5 1- 1/2-18UNEF 49,5 1,6 55,0
24 38,10 39,6 46,0 4,0 23,3 1- 5/8-18UNEF 52,5 1,6 57,0
Order ref. see page 22
KPT/KPSE Miniature circular connectors
Subject to change
24
Jam nut receptacle
Shell KPT/KPSE
size A +0,25 B +0
-0 -0,12
8 14,5 13,6
10 17,7 16,8
12 22,7 20,9
14 25,7 24,1
16 28,8 27,2
18 32 30,4
20 35,1 33,6
22 38,4 36,8
24 41,5 40
Box and wall mounting receptacle
Shell size for rear mounting for front mounting
D +0,25 / -0 D +0,25 / -0 R ±0,15
8 14 12,7 15,1
10 17 16 18,3
12 22 19 20,6
14 25 22,2 23,0
16 28 25,5 24,6
18 31 28,5 27,0
20 34,5 31,7 29,4
22 37,5 35 31,8
24 41 38 34,9
Panel cutouts
Mounting hole diameter
Shell size KPT/KPSE P - Panel thickness
T +0,3 screw head height included
8 3,1 2,2
10 3,1 2,2
12 3,1 2,2
14 3,1 2,2
16 3,1 2,2
18 3,1 2,2
20 3,1 5,4
22 3,1 5,4
24 3,6 5,4
rear mounting front mounting
KPT/KPSE Miniature circular connectors
25
Shell size A K M R S Ø T
+0,03 -0,13 ±0,4 ±0,15 ±0,15 max. ±0,15
* 8 A 12,00 1,6 12,1 15,1 21,0 3,05
* 10 A 15,00 1,6 12,1 18,3 24,2 3,05
* 12 A 19,05 1,6 12,1 20,6 26,6 3,05
* 14 A 22,23 1,6 12,1 23,0 29,0 3,05
* 16 A 25,40 1,6 12,1 24,6 31,3 3,05
* 18 A 28,58 1,6 12,1 27,0 33,7 3,05
* 20 A 31,75 2,4 14,5 29,4 36,9 3,05
* 22 A 34,93 2,4 14,5 31,8 40,1 3,05
* 24 A 38,10 2,4 15,4 34,9 43,3 3,75
* Add KPT 15 or MS 3115 prefixes
Dummy receptacles
Series
Dummy receptacle
Shell size
Flange
A-Standard
KPT 15 - 8 A
MS 3115 - 10 A
How to order
KPT/KPSE Miniature circular connectors
Subject to change
26
How to order
Series
KPT80 – for plug
KPT81 – for receptacle
Shell size
8 – 24
Termination
D –Preferred type: with nylon cord and end link
clip and end link attached
C – sash chain
N – sash chain with ring (81 only)
Modification
A232 – Zinc cobalt, black
A233 – Zinc cobalt, green
without code = A66 – oliv drab chromate over cadmium
VG95328 - Z2 C 10
VG Specification
Style
Z1 – for receptacle
Z2 – for plug
Termination
C –with nylon cord and end link
clip and end link attached
Shell size
8 – 24
Shell A L1 B L2 H N
size max max. max. max.
8 18,26 19,84 18,0 21,44 76 14,7
10 21,44 19,84 20,3 21,44 76 17,9
12 25,40 19,84 25,1 21,44 89 22,6
14 28,58 19,84 28,2 21,44 89 25,8
16 31,75 19,84 31.5 21,44 89 29,0
18 34,92 19,84 34,5 21,44 89 32,2
20 38,10 21,44 37,8 21,44 101 35,3
22 41,28 21,44 40,9 21,44 101 38,5
24 44,45 22,22 44,2 22,22 101 41,7
KPT80 - 10 D - A34
MS3180 - 10
Protective caps
Material and finishes
Protective cap Aluminum alloy
Sash chain Stainless steel
Cord Polyamide
Ring Stainless steel
Clip Aluminum alloy
Gasket Fluor Silicone
Endlink / rivet Stainless steel, passivated
Bayonet pin Stainless steel, passivated
Finishes
A232 Zinc cobalt, black
A233 Zinc cobalt, green
A66 Olive drab chromate over cadmium
81 – for receptacles
cap with nylon cord D / preferred type
KPT 80 – for plugs
cap with sash chain C or N KPT 81 – for receptacles
cap with sash chain C or N
Crimp tool for clips upon request
80 – for plugs
cap with nylon cord D / preferred type
KPT/KPSE Miniature circular connectors
27
KPT14A4
Contact type Insertion tool Order ref. Old designation Extraction tool Order ref. LN
Coaxial - - - CET-C6B 070064-0000 -
KPSE/VG 95328
Contact size Contact type Contact order ref.
KPSE version VG 95328 version
20 Socket with 031-8704-203 031-8704-203
insulation support
Pin with 430-8560-006 430-8560-006
insulation support
16 Socket 031-8704-000 031-8704-000
Pin 430-8560-004 430-8560-004
12 Socket 031-8704-012
Pin 430-8560-016
Grounding pin 430-8560-020
KPSE
Tool Designation Order ref. Locator* Order ref. Test gage Order ref.
Hand crimp tool M22520/1-01 995-0001-585 M22520/1-02 995-0001-736 M22520/3-1 995-0001-684
Crimp machine WA27F-CE 121586-5067 M22520/1-02 995-0001-736 M22520/3-1 995-0001-684
Crimp machine HACS HACS - - - -
* for contact sizes 20, 16, 12
Tools and Accessories
KPT14A4
Coaxial Pin DM 53740-5001
Socket DM 53742-5001
KPSE
Contact size Colour code MS Order ref. LN Cannon
20 Red MS3187A20 - BL0,6LN 29500 225-1012-000
16 Blue MS3187-16A - BL1,2LN 29500 225-1011-000
12 Yellow MS3187-12 - - 225-0072-000
Coaxial 14A4 Yellow - - - 225-0018-000
KPSE
Shell Alu-Flex Chloroprene
size conductive non conductive
8 075-8543-000 075-8543-010
10 075-8543-001 075-8543-011
12 075-8543-002 075-8543-012
14 075-8543-003 075-8543-013
16 075-8543-004 075-8543-014
Shell Alu-Flex Chloroprene
size conductive non conductive
18 075-8543-005 075-8543-015
20 075-8543-006 075-8543-016
22 075-8543-007 075-8543-017
24 075-8543-008 075-8543-018
Crimp tools
Insertion/Extraction tool
Contacts
Wire hole fillers/Grommet sealing plugs
Flange gaskets
KPSE
Contact size Insertion tool Order ref. Old designation Extraction tool Order ref. LN
20* - 038894-0018 CIT-20-16 MS2425R20 995-0001-965 W0,6LN29500
20** M24256A20 995-0001-950 CIT-20-5A MS2425R20 995-0001-965 W0,6LN29500
16 M24256A16 995-0001-951 CIT-16-1 MS2425R16 995-0001-964 W1,2LN29500
12 M24256A12 995-0001-913 - MS2425R12 995-0001-966 -
* without insulation support ** with insulation support
KPT/KPSE Miniature circular connectors
Subject to change
28
Contact Cable size Strip
size mm2 (AWG) insulation
20 0,93-0,21 (20-24) 5,0 mm
16 1,91-0,60 (16-20) 6,5 mm
12 3,18-1,91 (12-14) 6,5 mm
14A4 Coax RG179B/u
Contact insertion
5. Remove hardware from plug and receptacle. Slide
hardware over wire bundle in proper order for re-
assembly.
6. Use the proper contact insertion tool, and slide the
tool over the terminal end of the contact. The size 16
contact lies in the tool and the tool tip butts against the
contact shoulder . The rear , or insulation support, of the
size 20 contact butts against an internal shoulder in
the tool tip.
4. Release crimped contact and wire from tool. Be
certain the wire is visible thru inspection hole in contact.
7. Beginning from center cavity and working outwards,
insert wired contacts into rear of connector by hand
until the front of the contact shoulder is no more than
1/8" from the grommet. Holding the connector securely ,
position tool behind contact. Push tool straight into
contact cavity until contact snaps into position. A light
pull on wire will assure that contact is locked securely.
Repeat for remaining contacts.
Contact extraction
10. Slide hardware back over wire bundle. Using pro-
per extraction tool or extraction end of proper insertion/
extraction tool, proceed as follows:
8. Use wire hole fillers or grommet sealing plugs to fill
any empty cavities and assemble hardware to rear of
plug or receptacle.
11. Use the proper extraction tool. There are two lines
on the clip sleeve which are vital to the contact
removal process. The first index line is used for
Completion
9. Check face of plug or receptacle for proper contact
installation.
Crimping contacts
1. Strip wires according to the table above taking care
not to cut or nick strands.
2. Insert stripped wire into contact crimp pot. Wire must
be visible thru inspection hole. 3. Using correct crimp tool and locator, cycle the tool
once to be sure the indentors are open. Insert contact
and wire into locator. Squeeze tool handles firmly and
completely to insure a proper crimp. The tool will not
release unless the crimp indentors in the tool head
have been fully actuated.
removing pin contacts while the second index line is
for removing socket contacts. Carefully place the tool
tip over the contact to be extracted until the tool tip
touches the insulator face. Carefully rotate the tool until
the index line is slightly below the insulator face. Keep
an even pressure against tool body; push plunger
forward with thumb and index finger; and push the
contact out through the clip. Carefully remove extraction
tool from connector. Pull the wire by hand to complete
the removal of the contact.
Please ask for our detailed
Assembly Instruction
Assembly Instructions
KPT/KPSE Miniature circular connectors
29
Part No. Part No. Part No. Part No. Part No.
Cannon MIL-C-26482 NFL 54125 VG95328 LN 29500
KPT80 MS 3180
KPT80...C Z 2...VG 95328
KPT81 MS 3181
KPT81...C Z 1...VG 95328
KPT81...N MS 3181...N
Cross Reference List KPT/MIL-C-26482, NFL 54125, VG 95328
Part No. KPT Part No. Part No. Part No. Part No.
Cannon MIL-26482 NFL 54125 VG 95328 LN 29500
KPT00B*-*** 25100A*-***50
KPT00B*-*** 25100AC*-***50
KPT00E*-*** MS3110E*-*** 25100E*-***50
KPT00F*-*** MS3110E*-*** 25100EC*-***50
KPT0E*-***DN
KPT0E*-***DZ
KPT01A*-*** 25101A*-***50
KPT01B*-*** 25101AC*-***50
KPT01E*-*** MS3111E*-*** 25101E*-***50
KPT01F*-*** MS3111F*-*** 25101EC*-***50
KPT1E*-***DN
KPT06A*-*** 25106A*-***50
KPT06B*-*** 25106AC*-***50
KPT06E*-*** MS3116E*-*** 25106E*-***50
KPT06F*-*** MS3116F*-*** 25106EC*-***50
KPT06G*-*** 25106J*-***50
KPT1E*-***DZ 25102E*-***50Y11*
25107A*-***50Y11*
KPT6A*-***88
KPT6E*-***DN
KPT6E*-***DZ
KPT02E*-*** MS3112E*-*** 25102E*-***50 H*-***VG 95328
KPT07A*-*** 25107A*-***50
KPT07E*-*** MS3114E*-*** 25107E*-***50
KPT07F*-*** MS3114F*-*** 25107EC*-***50
KPT08E*-***
KPT08F*-*** 25108EC*-***50
KPT7E*-***DN
KPTB*-*** MS3119E*-*** 251B*-***
Cross Reference List Protective Caps
Please note: Connectors acc. to VG 95328 and Cannon connectors series KPSE use different contacts – see page 27
KPT/KPSE Miniature circular connectors
Subject to change
30
Cross Reference List KPSE/MIL-C-26482, NFL 54125, VG95328
Part No. KPSE Part No. Part No. Part No.
Cannon MIL-C-26482 NFL 54-125 VG 95328
KPSE00A*-*** 25100RA*-***50
KPSE00B*-***
KPSE00E*-*** MS3120E*-*** 25100R*-***50 A*-***VG 95328
KPSE00F*-*** MS3120F*-*** 25100RC*-***50 B*-***VG 95328
KPSE0E*-***DZ R*-***VG 95328
KPSE0E*-***DN
KSPE01A*-*** 25101RA*-***50
KPSE01B*-***
KPSE01E*-*** MS3121E*-*** 25101R*-***50
KPSE01F*-*** MS3121F*-*** 25101RC*-***50
KPSE*-***DN
KPSE02E*-*** MS3122E*-*** 25102R*-***50 C*-***VG 95328
KPSE06A*-*** 25106RA*-***50
KPSE06B*-***
KPSE06E*-*** MS3126E*-*** 25106R*-***
KPSE06F*-*** MS3126F*-*** 25106RC*-***50 K*-***VG 95328
KPSE6A*-***88
KPSE6E*-***88 N*-***VG 95328
KPSE6E*-***DN J*-***VG 9532
KPSE6E*-***DZ M*-***VG 95328
KPSE07A*-*** 25107RA*-***50
KPSE1E*-***DZ
KPSE7E*-***DN S*-***VG 95328
KPSE07E*-*** MS3124E*-*** 25107R*-***50 D*-***VG 95328
KPSE07F*-*** MS3124F*-*** 25107RC*-***50 E*-***VG 95328
KPSE08E*-***
KPSE08F*-*** 25108RC*-***50
KPSE7E*-***DZ T*-***VG 95328
Please note: Connectors acc. to VG 95328 and Cannon connectors series KPSE use different contacts – see page 27
KPT/KPSE Miniature circular connectors
31
Product Safety Information
THIS NOTE SHOULD BE READ IN CONJUNCTION
WITH THE PRODUCT DATA SHEET/CATALOGUE.
FAILURE TO OBSERVE THE ADVICE IN THIS INFOR-
MATION SHEET AND THE OPERATING CONDITIONS
SPECIFIED IN THE PRODUCT DATA SHEET/
CATALOGUE COULD RESULT IN HAZARDOUS
SITUATIONS.
1. MATERIAL CONTENT AND PHYSICAL
FORM
Electrical connectors do not usually contain
hazardous materials. They contain conducting and
non-conducting materials and can be divided into
two groups.
a) Printed circuit types and low cost audio types
which employ all plastic insulators and casings.
b) Rugged, Fire Barrier and High Reliability types
with metal casings and either natural rubber,
synthetic rubber, plastic or glass insulating
materials.
Contact materials vary with type of connector and
also application and are usually manufactured from
either copper , copper alloys, nickel, alumel, chromel
or steel. In special applications, other alloys may
be specified.
2. FIRE CHARACTERISTICS AND ELECTRIC
SHOCK HAZARD
There is no fire hazard when the connector is
correctly wired and used within the specified
parameters. Incorrect wiring or assembly of the
connector or careless use of metal tools or
conductive fluids, or transit damage to any of the
component parts may cause electric shock or
burns. Live circuits must not be broken by sepa-
rating mated connectors as this may cause arcing,
ionisation and burning.
Heat dissipation is greater at maximum resistance
in a circuit. Hot spots may occur when resistance
is raised locally by damage, e.g. cracked or
deformed contacts, broken strands of wire. Local
overheating may also result from the use of the
incorrect application tools or from poor quality
soldering or slack screw terminals. Overheating may
occur if the ratings in the Product Data Sheet/
Catalogue are exceeded and can cause breakdown
of insulation and hence electric shock.
If heating is allowed to continue it intensifies by
further increasing the local resistance through loss
of temper of spring contacts, formation of oxide
film on contacts and wires, and leakage currents
through carbonisation of insulation and tracking
paths. Fire can then result in the presence of
combustible materials and this may release noxious
fumes. Overheating may not be visually apparent.
Burns may result from touching overheated
components.
ITT Cannon, a division of ITT Industries, Inc. manufactures the highest quality products available in the marketplace;
however these products are intended to be used in accordance with the specifications in this catalog. Any use or application
that deviates from stated operating specifications is not recommended and may be unsafe. No information and data
contained in this catalog shall be construed to create any liability on the part of Cannon. Any new issue of this catalog shall
automatically invalidate and supersede any and all previous issues. A limited warranty applies to Cannon products.
Except for obligations assumed by Cannon under this warranty , Cannon shall not be liable for any loss, damage, cost
of repairs, incidental or consequential damages of any kind, whether or not based on express or implied warranty,
contract, negligence or strict liability arising in connection with the design, manufacture, sale, use or repair of the
products. Product availability , prices and delivery dates are exclusively subject to our respective order confirmation form;
the same applies to orders based on development samples delivered. This catalog is not to be construed as an offer. It is
intended merely as an invitation to make an offer. By this publication, Cannon does not assume responsibility or any
liability for any patent infringements or other rights of third parties which may result from its use. Reprinting this catalog
is generally permitted, indicating the source. However, Cannon's prior consent must be obtained in all cases.
Cannon is a trademark of ITT Industries, Inc
3. HANDLING
Care must be taken to avoid damage to any
component parts of electrical connectors during
installation and use. Although there are normally
no sharp edges, care must be taken when handling
certain components to avoid injury to fingers.
Electrical connectors may be damaged in transit to
the customers, and damage may result in creation
of hazards. Products should therefore be examined
prior to installation/use and rejected if found to be
damaged.
4. DISPOSAL
Incineration of certain materials may release
noxious or even toxic fumes.
5. APPLICATION
Connectors with exposed contacts should not be
selected for use on the current supply side of an
electrical circuit, because an electric shock could
result from touching exposed contacts on an
unmated connector. Voltages in excess of 30 V ac
or 42.5 V dc are potentially hazardous and care
should be taken to ensure that such voltages can
not be transmitted in any way to exposed metal parts
of the connector body. The connector and wiring
should be checked, before making live, to have no
damage to metal parts or insulators, no solder blobs,
loose strands, conducting lubricants, swarf, or any
other undesired conducting particles. Insulation
resistance should be checked to make certain that
no low resistance joints or spurious conducting path
are existing between contacts and exposed metal
parts of the connector body. Further the contact
resistance of the connectors should be measured
within the electrical circuit in order to identify high
resistances which result in excessive connector
heating.
Always use the correct application tools as specified
in the Data Sheet/Catalogue.
Do not permit untrained personnel to wire, assemble
or tramper with connectors.
For operation voltage please see appropriate national
regulations.
IMPORTANT GENERAL INFORMATION.
1. Air and creepage paths/Operating voltage
The admissible operating voltages depend on the
individual applications and the valid national and
other applicable safety regulations.
For this reason the air and creepage path data
are only reference values. Observe reduction of air
and creepage paths due to PC board and/or harness-
ing.
2. Temperature
All information given are temperature limits. The
operation temperature depends on the individual
application.
3. Other important information
Cannon continuously endeavours to improve their
products. Therefore, Cannon products may deviate
from the description, technical data and shape as
shown in this catalogue and data sheets.
4. Harnessing and Assembly Instructions
If applicable, our special harnessing and/or assem-
bly instruction has to be adhered to. This is provid-
ed at request.
