T PL IA N M CO *R oH S Features Applications RoHS compliant* and halogen free** IEC 61000-4-2 ESD (Min. Level 4) Surface Mount SMA package IEC 61000-4-4 EFT Breakdown Voltage: 6.8 to 550 volts IEC 61000-4-5 Surge Peak Pulse Power: 400 watts Typical temperature coefficient: VBR = 0.1 % x VBR @ 25 C x T P4SMA Transient Voltage Suppressor Diode Series General Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AC (SMA) size format. The Transient Voltage Suppressor series offers a choice of Breakdown Voltages from 6.8 V up to 550 V. Typical fast response times are less than 1.0 picosecond for unidirectional devices and less than 5.0 picoseconds for bidirectional devices. Bourns(R) Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. Maximum Ratings (@ TA = 25 C Unless Otherwise Noted) Parameter Symbol Value Unit Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) PPK 400 Watts Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) IFSM 40 Amps VF 3.5 5.0 Volts TJ -55 to +150 C TSTG -55 to +150 C Instantaneous Forward Voltage @ 25 A (For Unidirectional Units Only) P4SMA6.8A ~ P4SMA200A P4SMA220A ~ P4SMA550A Operating Temperature Range Storage Temperature Range 1. 2. 3. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 C per Pulse Derating Curve. Mounted on 5.0 mm x 5.0 mm copper pad to each terminal. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). How to Order P4SMA 6.8 CA Series P4SMA = SMA/DO-214AC Breakdown Voltage 6.8 to 550 = 6.8 to 550 VBD (Volts) Asia-Pacific: Tel: +886-2 2562-4117 Fax: +886-2 2562-4116 EMEA: Tel: +36 88 520 390 Fax: +36 88 520 211 The Americas: Tel: +1-951 781-5500 Fax: +1-951 781-5700 www.bourns.com Suffix A = 5 % Tolerance Unidirectional Device CA = 5 % Tolerance Bidirectional Device * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. **Bourns considers a product to be "halogen free" if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. P4SMA Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 C Unless Otherwise Noted) Unidirectional Device Part No. P4SMA6.8A P4SMA7.5A P4SMA8.2A P4SMA9.1A P4SMA10A P4SMA11A P4SMA12A P4SMA13A P4SMA15A P4SMA16A P4SMA18A P4SMA20A P4SMA22A P4SMA24A P4SMA27A P4SMA30A P4SMA33A P4SMA36A P4SMA39A P4SMA43A P4SMA47A P4SMA51A P4SMA56A P4SMA62A P4SMA68A P4SMA75A P4SMA82A P4SMA91A P4SMA100A P4SMA110A P4SMA120A P4SMA130A P4SMA150A P4SMA160A P4SMA170A P4SMA180A P4SMA200A P4SMA220A P4SMA250A P4SMA300A P4SMA350A P4SMA400A P4SMA440A P4SMA480A P4SMA510A P4SMA530A P4SMA540A P4SMA550A Marking 6V8A 7V5A 8V2A 9V1A 10A 11A 12A 13A 15A 16A 18A 20A 22A 24A 27A 30A 33A 36A 39A 43A 47A 51A 56A 62A 68A 75A 82A 91A 100A 110A 120A 130A 150A 160A 170A 180A 200A 220A 250A 300A 350A 400A 440A 480A 510A 530A 540A 550A Bidirectional Device Part No. P4SMA6.8CA P4SMA7.5CA P4SMA8.2CA P4SMA9.1CA P4SMA10CA P4SMA11CA P4SMA12CA P4SMA13CA P4SMA15CA P4SMA16CA P4SMA18CA P4SMA20CA P4SMA22CA P4SMA24CA P4SMA27CA P4SMA30CA P4SMA33CA P4SMA36CA P4SMA39CA P4SMA43CA P4SMA47CA P4SMA51CA P4SMA56CA P4SMA62CA P4SMA68CA P4SMA75CA P4SMA82CA P4SMA91CA P4SMA100CA P4SMA110CA P4SMA120CA P4SMA130CA P4SMA150CA P4SMA160CA P4SMA170CA P4SMA180CA P4SMA200CA P4SMA220CA P4SMA250CA P4SMA300CA P4SMA350CA P4SMA400CA P4SMA440CA P4SMA480CA P4SMA510CA P4SMA530CA P4SMA540CA P4SMA550CA Breakdown Voltage VBR (Volts) Working Peak Reverse Voltage Maximum Reverse Leakage @ VRWM Maximum Reverse Voltage @ IRSM Maximum Reverse Surge Current Marking Min. Max. @ IT (mA) VRWM (V) IR (A) VRSM (V) IRSM (A) 6V8C 7V5C 8V2C 9V1C 10C 11C 12C 13C 15C 16C 18C 20C 22C 24C 27C 30C 33C 36C 39C 43C 47C 51C 56C 62C 68C 75C 82C 91C 100C 110C 120C 130C 150C 160C 170C 180C 200C 220C 250C 300C 350C 400C 440C 480C 510C 530C 540C 550C 6.45 7.13 7.79 8.65 9.5 10.5 11.4 12.4 14.3 15.2 17.1 19 20.9 22.8 25.7 28.5 31.4 34.2 37.1 40.9 44.7 48.5 53.2 58.9 64.6 71.3 77.9 86.5 95 105 114 124 143 152 162 171 190 209 237 285 332 380 418 456 485 503.5 513 522.5 7.14 7.88 8.61 9.55 10.5 11.6 12.6 13.7 15.8 16.8 18.9 21 23.1 25.2 28.4 31.5 34.7 37.8 41 45.2 49.4 53.6 58.8 65.1 71.4 78.8 86.1 95.5 105 116 126 137 158 168 179 189 210 231 263 315 368 420 462 504 535 556.5 567 577.5 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 5.8 6.4 7.02 7.78 8.55 9.4 10.2 11.1 12.8 13.6 15.3 17.1 18.8 20.5 23.1 25.6 28.2 30.8 33.3 36.8 40.2 43.6 47.8 53 58.1 64.1 70.1 77.8 85.5 94 102 111 128 136 145 154 171 185 214 256 300 342 376 408 434 477 486 495 1000 500 200 50 10 5 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.5 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77 85 92 103 113 125 137 152 165 179 207 219 234 246 274 328 344 414 482 548 602 658 698 725 740 760 39 36.3 33.9 30.6 28.3 26.3 24.6 22.5 19.3 18.2 16.1 14.8 13.4 12.3 10.9 9.9 9 8.2 7.6 6.9 6.3 5.8 5.3 4.8 4.5 4 3.6 3.3 3 2.7 2.5 2.3 2 1.9 1.8 1.7 1.5 1.3 1.2 1 0.9 0.8 0.7 0.6 0.6 0.6 0.5 0.5 Notes: 1. Suffix `A' denotes a 5 % tolerance unidirectional device. 2. Suffix `CA' denotes a 5 % tolerance bidirectional device. 3. For bidirectional devices with a VR of 10 volts or less, the IR limit is double. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. 3312 - 2Transient P4SMA mm SMD Voltage Trimming Suppressor Potentiometer Diode Series Rating & Characteristic Curves Pulse Derating Curve Maximum Non-Repetitive Surge Current 60 Peak Forward Surge Current (Amps) Peak Pulse Derating in Percent of Peak Power or Current 100 75 50 25 50 40 30 20 Pulse Width 8.3 ms Single Half Sine-Wave 10 0 0 0 50 25 75 100 125 150 175 1 200 2 5 Pulse Waveform 20 50 100 Typical Junction Capacitance 10000 150 tr = 10 T J = 25 C sec. Pulse Width (td) is defined as the point where the peak current decays to 50 % of IPPM Peak Value IPPM 100 Half Value- I PPM 2 50 Bidirectional V = 0 V CJ - Junction Capacitance (pF) IPPM - Peak Pulse Current, % IRSM 10 Number of Cycles at 60 Hz Ambient Temperature (C) 10/1000 sec. Waveform as defined by R.E.A. 1000 Unidirectional V = 0 V Unidirectional @VR 100 10 T J = 25 C f = 1.0 MHz Vsig = 50 mVp-p td 0 0 1.0 2.0 3.0 4.0 t - Time (ms) Bidirectional @VR 1 1 10 100 1000 V BR - Reverse Breakdown Voltage (V) Pulse Rating Curve Steady State Power Derating Curve 1.0 PP, Peak Power (KW) TA = 25 C Non-repetitive Pulse Waveform Shown in Pulse Waveform Graph 10 1.0 0.1 0.1 s 1.0 s 10 s 100 s TP, Pulse Width 1.0 ms 10 ms RM(AV) Steady State Power Dissipation (W) 100 0.8 0.6 0.4 0.2 60 Hz Resistive or Inductive Load 0.0 0 25 50 75 100 125 TL, Lead Temperature (C) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. 150 175 200 3312Transient - 2 mm SMD Trimming Potentiometer P4SMA Voltage Suppressor Diode Series Product Dimensions Recommended Footprint CATHODE BAND a A (FOR UNIDIRECTIONAL PRODUCTS ONLY) B b C c F Dimension a (Max.) E G D b (Min.) c (Min.) Dimension A B C D E F G SMA (DO-214AC) 3.99 - 4.57 (0.157 - 0.180) 2.29 - 2.92 (0.090 - 0.115) 1.25 - 1.65 (0.049 - 0.065) 4.83 - 5.59 (0.190 - 0.220) 0.05 - 0.203 (0.002 - 0.008) 1.98 - 2.62 (0.078 - 0.103) 0.76 - 1.52 (0.030 - 0.060) DIMENSIONS: SMA (DO-214AC) 2.70 (0.106) 2.10 (0.083) 1.27 (0.050) DIMENSIONS: MM (INCHES) Physical Specifications Case ...........................................Molded plastic per UL Class 94V-0 Polarity....................... Cathode band indicates unidirectional device No cathode band indicates bidirectional device MM (INCHES) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. CDDFN5-0504N - TVS/Steering Diode Array P4SMA Transient Voltage Suppressor Diode Series Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P 1 d T E Index Hole 120 F D2 W B D1 D P A Trailer End ....... ....... C Device ....... ....... ....... ....... Leader ....... ....... W1 Start DIMENSIONS: 10 pitches (min.) MM (INCHES) 10 pitches (min.) Direction of Feed Item Symbol Carrier Width A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel -- Devices are packed in accordance with EIA 481 standard specifications shown here. SMA (DO-214AC) 2.90 0.20 (0.114 0.008) 5.50 0.20 (0.217 0.008) 2.26 0.20 (0.089 0.008) 1.50 0.10 (0.061 0.004) 330 (12.992) 50.0 MIN. (1.969) 13.0 0.20 (0.512 0.008) 1.75 0.10 (0.069 0.004) 5.50 0.05 (0.217 0.002) 4.00 0.10 (0.157 0.004) 4.00 0.10 (0.157 0.004) 2.00 0.05 (0.079 0.002) 0.30 0.10 (0.012 0.004) 12.00 0.30 (0.472 0.012) 18.4 MAX. (0.724) 5,000 06/15 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Bourns: P4SMA91A P4SMA100A P4SMA27A P4SMA530CA P4SMA160CA P4SMA550CA P4SMA39CA P4SMA51A P4SMA43CA P4SMA8.2A P4SMA56A P4SMA8.2CA P4SMA27CA P4SMA91CA P4SMA110A P4SMA36A P4SMA220A P4SMA24A P4SMA440CA P4SMA170A P4SMA110CA P4SMA150CA P4SMA20A P4SMA350CA P4SMA15CA P4SMA160A P4SMA16A P4SMA550A P4SMA120A P4SMA7.5CA P4SMA180CA P4SMA480CA P4SMA9.1A P4SMA68CA P4SMA6.8A P4SMA22A P4SMA22CA P4SMA75A P4SMA82CA P4SMA56CA P4SMA39A P4SMA300A P4SMA180A P4SMA18A P4SMA510CA P4SMA530A P4SMA200A P4SMA170CA P4SMA510A P4SMA150A P4SMA12A P4SMA540A P4SMA62CA P4SMA47CA P4SMA10CA P4SMA11A P4SMA18CA P4SMA62A P4SMA68A P4SMA33CA P4SMA36CA P4SMA9.1CA P4SMA82A P4SMA250A P4SMA480A P4SMA75CA P4SMA400CA P4SMA15A P4SMA120CA P4SMA10A P4SMA300CA P4SMA250CA P4SMA16CA P4SMA100CA P4SMA200CA P4SMA43A P4SMA12CA P4SMA30A P4SMA130CA P4SMA20CA P4SMA130A P4SMA24CA P4SMA33A P4SMA400A P4SMA51CA P4SMA47A P4SMA440A P4SMA7.5A P4SMA6.8CA P4SMA30CA P4SMA540CA P4SMA350A P4SMA11CA P4SMA13CA P4SMA13A P4SMA220CA