TLP280,TLP280-4
1 2017-04-27
TO SHIBA Photo cou pler GaAs Ired & Photo-Transistor
TLP280, TLP280-4
Programmable Controllers
AC/DC-Input Module
PC Card Modem (PCMCIA)
TLP280 and T LP 280-4 is a very small and thin coupler, suitable for surface
mount assembly in applications such as PCMCIA fax modem, programmable
controllers.
TLP280 and T LP 280-4 consist of photo transistor, optically coupled to two
gallium arsenide infrared emitting diodes connected inv erse p ar all el, and can
operate directly by AC input current.
• Collector-emitter voltage: 80 V (min)
• Current transfer ratio: 50% (min)
Rank GB: 100% (min)
• Isolation voltage: 2500 Vrms (min)
• UL recognized: UL1577, file No. E67349
• cUL approved: CSA Component Acceptance Service No. 5A
File No.E67349
• Option (V4) type
VDE approved: EN60747-5-5
Note: When a EN60747-5-5 approved type is needed,
Please designate “Option(V4)”
Pin Configuration (top view)
TOSHIBA
11-3A1
Weight : 0.05 g (typ.)
TOSHIBA
11-10F1
Weight : 0.19 g (typ.)
Unit: mm
: Anode-
Cathode
: Cathode
Anode
: Emitter
: Collector
1,3,5,7
2,4,6,8
9,11,13,15
10,12,14,16
9
8
10
7
11
6
12
5
13
4
14
3
15
2
16
1
3
2
4
1
TLP280
1 : Anode
Cathode
2 : Cathode
Anode
3 : Emitter
4 : Collector
Start of commercial production
1996-03
Unit: mm
TLP280,TLP280-4
2 2017-04-27
Current Transfer Ratio
Note : For the supply status of TLP280 rank Y and BL products, please contact with our sales representative.
Note 1: When ordering product, please specify both the part number and the classification, e.g. TLP280(GB).
Note: Application type name for certification test, please use standard product type name, i.e.
TLP280(GB): TLP280, TLP280-4(GB): TLP280-4.
Absolute Maximum Ratings (Ta = 25°C)
Characteristic Symbol
Rating
Unit
TLP280
TLP280-4
LED
Forward current IF(RMS) ±50 mA
Forward current derati ng (Ta ≥25°C) ΔIF/°C -0.7 -0.5 mA/°C
Pulse forward current (100 μs pulse, 100 pps) IFP ±1 A
Diode power dissipat i on PD 100 70 mW
Diode power dissipat i on derating (Ta ≥25°C)
Δ
PD/°C -1 -0.7 mW/°C
Junction temperature Tj 125 °C
Detector
Collector-emitter voltage VCEO 80 V
Emitter-collector voltage VECO 7 V
Collector current IC 50 mA
Collect or power dissipat i on (1 circuit) PC 150 100 mW
Collect or power dissipat i on derating
(Ta ≥ 25°C) (1 circuit) ΔPC/°C -1.5 -1.0 mW/°C
Junction temperature Tj 125 °C
Storage temperature range Tstg -55 to 125 °C
Operating tem perature range Topr -55 to 100 °C
Lead soldering temperature (10 s) Tsol 260 °C
Total package power dissi pation (1 circuit) PT 200 170 mW
Total package power dissi pation derating
(Ta ≥ 25°C) (1 circuit) ΔPT/°C -2.0 -1.7 mW/°C
Isolation voltage (AC, 60 s, R. H.≤ 60%) (Note 1) BVS 2500 Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant
change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating
conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc)
Note 1: Device considered a two terminal device: LED side pins shorted together and detector side pins shorted together.
Part Number Classification
(Note 1)
Current Transf er Ratio (%)
(IC / IF)
Marking of
Classification
IF = 5 mA, VCE = 5 V, Ta = 25°C
min
max
TLP280
Blank 50 600 Blank, YE, GR, BL, GB
Rank Y 50 150 YE
Rank GR 100 300 GR
Rank BL 200 600 BL
Rank GB 100 600 GB, GR, BL
TLP280-4 Blank 50 600 Blank, GB
Rank GB 100 600 GB
TLP280,TLP280-4
3 2017-04-27
Electrical Characteristics (Ta = 25°C)
Characteristic Symbol Test Condition Min Typ Max Unit
LED
Forward voltage VF IF = ±10 mA 1.0 1.15 1.3 V
Capacitance CT V = 0 V, f = 1 MHz ― 60 — pF
Detector
Collector-emitter breakdown voltage V(BR)CEO IC = 0.5 mA 80 ― — V
Emitter-collector breakdown voltage V(BR)ECO IE = 0.1 mA 7 ― — V
Collector dark current (Note 1)
ICEO
VCE = 48 V ― 0.01 0.1 μA
Ambient light below (100 ℓx) ― 2 10
VCE = 48 V, Ta = 85°C ― 2 50 μA
Ambient light below (100 ℓx) ― 4 50
Capacitanc e (collector to emitter) CCE V = 0 V, f = 1 MHz ― 10 ― pF
Note 1: Because of the construction, leak current might be increased by ambient light. Please use photocoupler
with less ambient light.
Coupled Electric al Characteristics (Ta = 25°C)
Characteristic Symbol Test Condition MIn Typ. Max Unit
Current transf er ratio IC/IF IF = ±5 mA, VCE = 5 V 50 — 600 %
Rank GB
100 — 600
Saturated CTR IC/IF(sat) IF = ±1 mA, VCE = 0.4 V — 60 — %
Rank GB
30 — —
Collector-emitter
saturati on voltage VCE(sat)
IC = 2.4 mA, IF = ±8 mA — — 0.4
V
IC = 0.2 mA, IF = ±1 mA — 0.2 —
Rank GB
— — 0.4
Off-state collector current IC(off) VF = ± 0.7 V, V CE = 48 V — — 10 μA
CTR symmet ry IC(ratio) IC (IF = -5 mA) / IC (IF = 5 mA)
(Note 1)
0.33 — 3 —
Note 1:
5V)
CE
V,
F1
I
F
(I
C1
I5V)
CE
V,
F2
I
F
(I
C2
I
C(ratio)
I==
==
=
V
CE
IC1
IC2
IF1
IF2
TLP280,TLP280-4
4 2017-04-27
Isolation Characteristics (Ta = 25°C)
Characteristic Symbol Test Condition Min Typ. Max Unit
Capacitanc e input to output CS VS = 0 V, f = 1 MHz — 0.8 — pF
Isolation resist ance RS VS = 500 V, R.H.≤ 60% 5×1010 1014 — Ω
Isolation voltage BVS
AC, 60 s 2500 — — Vrms
AC, 1 s, in oil — 5000 —
DC, 60 s, in oi l — 5000 — Vdc
Switching Characteristics (Ta = 25°C)
Characteristic Symbol Test Condition Min Typ. Max Unit
Rise time tr
VCC = 10 V, IC = 2 mA
RL = 100 Ω
— 2 —
μs
Fall time tf — 3 —
Turn-on time ton — 3 —
Turn-off time toff — 3 —
Turn-on time tON RL = 1.9 kΩ (Fig.1)
VCC = 5 V, IF = ±16 mA
— 2 —
μs
Storage time ts — 25 —
Turn-off time tOFF — 40 —
Fig. 1: Switching time test circuit
VCE
VCC
RL
IF IF
VCE
VCC
0.5V
4.5V
tOFF
tON
tS
TLP280,TLP280-4
5 2017-04-27
Allowable forward current
IF (mA)
Ambient temperature Ta (°C)
TLP280-4
IF – Ta
TLP280
0
120
100
40
20
0
-20
20
40
80
100
80
60
60
Pulse forward current IFP (mA)
Duty cycle ratio DR
PULSE WIDTH
≤100μs
Ta=25°C
IFP – DR
10
1 100
30
50
100
1000
3000
10-1
300
500
10-2
10-3
Pulse forward current IFP (mA)
Pulse forward voltage VFP (V)
Pulse width≤10μs
Repetitive
Frequency=100Hz
Ta=25°C
IFP – VFP
1
3.0
2.6
1.8
1.4
1.0
0.6
3
5
10
30
300
500
1000
2.2
50
100
Forward voltage temperature coefficient
ΔVF /ΔTa (mV/°C)
Forward current IF (mA)
ΔVF /ΔTa– IF
-0.4
50
30
5
1
0.3
0.1
-0.8
-1.2
-1.6
-2.8
-3.2
10
-2.0
-2.4
0.5
3
Allowable collector power
Dissipation PC (mW)
PC – Ta
Ambient temperature Ta (°C)
TLP280-4
TLP280
0
120
100
60
20
0
-20
40
80
160
200
80
120
40
Forward current IF (mA)
Forward voltage VF (V)
100°C
IF – VF
75°C
50°C
25°C
0°C
-25°C
-50°C
0.1
1.6
1.2
1.0
0.8
0.6
1
100
1.4
10
*The above graphs show typical characteristic.
TLP280,TLP280-4
6 2017-04-27
Collect or cur re nt IC (mA)
IC – VCE
Collector-emitter voltage VCE (V)
IF = 5mA
PC(MAX.)
10
15
20
30
50
10
10 5 0
20
30
40
50
0
Collect or cur re nt IC (mA)
IC – VCE
IF = 2mA
50
40
30
20
10
5
Collector-emitter voltage VCE (V)
5
1.0 0..5 0
10
15
25
30
0
20
VCE = 10V
VCE = 5V
VCE = 0.4V
Collect or cur re nt IC (mA)
IC – IF
Forward current IF (mA)
Sample A
Sample B
1
100
100
10 1 0.1
0.1
10
ICEO – Ta
Ambient temperature Ta (°C)
VCE = 48V
5V
10V
24V
101
100 80 60 40 20 0
100
10-1
10-2
10-3
10-4
Collector dark current
ID (ICEO) (μA)
Forward current IF (mA)
IC / IF – IF
Current transfer ratio
IC / IF (%)
VCE = 10V
VCE = 5V
VCE = 0.4V
Sample B
Sample A
1000
100 10 1 0.1
100
10
Ta = 25°C
Ta = 25°C
*The above graphs show typical characteristic.
TLP280,TLP280-4
7 2017-04-27
Switching Time– Ta
Switching time (μs)
IF = 16mA
tOFF
Ambient temperature Ta (°C)
0.1
100
1
100
10
50
0
-20
VCC = 5V
RL = 1.9kΩ
ts
tON
VCE(sat) – Ta
collector-Emitter saturation
Voltage VCE(sat) (V)
Ambient temperature Ta (°C)
IF = 8mA, IC = 2.4mA
IF = 1mA, IC = 0.2mA
0
100
0
-40
0.24
50
0.20
0.16
0.12
0.08
0.04
25
10
5
1
IF = 0.5mA
VCE = 5V
Collect or cur re nt IC (mA)
IC – Ta
Ambient temperature Ta (°C)
0.1
100
0
-20
1
100
50
10
Switching time (μs)
Load resistance RL (KΩ)
Ta = 25°C
IF = 16mA
VCC = 5V
Switching Time– RL
100
1
100
1000
10
10
1
tOFF
ts
tON
*The above graphs show typical characteristic.
TLP280,TLP280-4
8 2017-04-27
RESTRICTIONS ON PRODUCT USE
• Toshi ba Corporation, and its subsidiaries and affiliates (coll ect i vely "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, soft ware and systems (coll ect i vel y "Product" ) without not ice.
• This document and any information herein may not be reproduced without pri or writt en permiss i on from TOSHIBA. Even with
TOSHIBA's written perm issi on, reproduc t i on is permiss i bl e only if reproduction is without alt eration/omission.
• Though TOSHIBA works continually to improve Product's quality and reliabil i ty, Product c an malfuncti on or fail. Cust omers are
responsible for complying with safety standards and for providing adequate des i gns and safeguards for thei r hardware, soft ware and
systems which minimi ze risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product,
or incorporate the Product int o their own applicati ons, cust om ers must also ref er to and comply with (a) the latest versions of all
relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for
Product and the precautions and conditions set forth in the " T OSH IBA Semiconductor Reliability Handb ook" and (b) the instructions for
the applicati on with which the Product will be used with or for. Customers are solely responsi ble for all aspects of thei r own product
design or applications, i ncludi ng but not limit ed to (a) determini ng the appropriatenes s of the use of this Product in such design or
applicat i ons; (b) evaluati ng and determi ni ng the applic abi l ity of any informati on contained i n this document, or in charts, diagrams,
programs, al gorithms, s ample applic ation circuits, or any other referenced documents; and (c) validating all operating parameters for
such designs and applications. TOSHIB A ASSUME S NO LIABILI TY FOR CUS TOMERS' PRODUCT DESIGN O R APPLICATIO NS.
• PRODUCT IS NEI THE R INTENDE D NO R WAR RANTED FOR USE I N EQUIPM E NTS OR SYSTEMS TH AT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR REL IABILITY, AND/OR A MALFUNCTION OR FAILURE O F WHICH
MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIO US PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). E xcept for s peci f ic applications as expressly stated in this document, Unintended Use includes, without
limitati on, equipm ent used in nuclear fac ili t i es, equipm ent used in the aerospace industry, m edical equipm ent, equipment us ed for
automobiles, trains, ships and other transport ation, traffic signal i ng equipment, equipment used to control combustions or explosions,
safety devices, elevators and escalators , devic es rel ated to electric power, and equipment used in finance-relat ed fiel ds. IF YOU USE
PRODUCT FOR UNINTE NDE D USE, TOSHI BA ASSUMES NO LI ABIL ITY FOR PRODUCT. For details, please contact your
TOSHIBA sal es representat i ve.
• Do not disassemble, anal yze, reverse-engineer, alter, modify, t ranslate or c opy Product, whether in whole or in part.
• Product shall not be used for or incorporated int o any products or systems whose manufacture, us e, or sale is prohibit ed under any
applicable l aws or regulations.
• The information cont ai ned herein is presented onl y as guidance for Product use. No responsi bility is ass umed by TOSHIBA for any
infringement of patents or any other intellect ual property ri ght s of thi rd parties t hat may result f rom the use of Product. No license to
any intellectual property right is granted by this document, whether expres s or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS P RO V IDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EX TE NT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WH ATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRE CT, CONSEQUENTI AL, SPE CIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WI THOUT LIMITATION, LOSS OF PROFI TS, LOS S OF OPPO RTUNITI ES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DIS CL AIM S ANY AND ALL EXPRES S OR IMPLI E D WARRANTIES AND CONDI TI O NS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCL UDING WARRANTIE S OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACC URACY OF INFORMATION, OR NONINFRINGEMENT.
• GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to hum ans if consu med or ab sorbed, w hether in the form of du st or vapor.
Handle with care and do not break, cut, crush, grind, dissol ve chemically or ot herwise expose GaAs i n Product.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,
for the design, development, use, stock pili ng or manufact uri ng of nuclear, chemical, or biol ogical weapons or miss ile t echnol ogy
products (mass destructi on weapons). Product and related software and technology may be controlled under the applicable export
laws and regulations includi ng, without limi t ation, t he Japanes e Foreign Exchange and Foreign Trade Law and the U.S. Export
Administ ration Regul at i ons. Export and re-export of Product or related software or technology are strictly prohibited except in
compliance with al l applicabl e export laws and regulati ons.
• Please contact your TOSHIBA sales representati ve for details as to environmental matters such as the RoHS compati bi lit y of Product.
Please use Product in compliance with all appli c able laws and regulations t hat regulate the inclusion or use of controlled substances,
including without limi t ation, the EU RoHS Directi ve. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES
OCCURRING AS A RESUL T OF NONCOMPLIANCE WITH APPLICABLE LAWS AND RE G ULATIONS.