CKB-38-79180 - TE CONNECTIVITY

CSM_M2P_DS_E_3_2

Indicator (Rectangular)

M2P

Large Rectangular-bodied Indicators

• Excellent illumination with even surface brightness.

• Three-color models (green, orange, red; chameleon lighting)

included in lineup.

Refer to Safety Precautions for All Pushbutton Switches/

Indicators and Safety Precautions of A3P.

List of Models

Model Appearance

M2PJ

(Rectangular)

M2PA

(Square)

M2PT

(Round)

52 max.

6.7

52 max.

6.7

52 max.

6.4

32 dia.

■ Panel cutout dimensions: Refer to page 12. ■ Dimensions: Refer to page 11.

■ Accessories, replacements, and tools: Refer to the A3P. ■ Specifications: Refer to the A3P.

M2P

Model Number Structure

Model Number Legend ..... The model numbers used to order sets of Units are illustrated below. One set comprises the Display, Lamp,

and Socket.

For information on combinations, refer to Ordering Information.

(4) (5)

24E R ..........Single screen

(1) (2) (3) Upper Lower

M2P J -90A 1 1 - 24E RW ........................... Horizontal 2-split screen

(2) Screen Pattern

*1.

With chameleon models, the whole screen

lights red, green, or orange. When not lit, the

display is white.

•The available rectangular models are shown

below. Select from among the individual

products shown on page 7.

The above diagrams show the Sockets with

the “ ” mark facing down.

Colored-illumination models up to the

4-split screen models are available as

individual

Units. Refer to page 7.

“Colored-illumination” models operate

in the way shown

below:

Illumination-only models

Symbol

Screen pattern

Single screen

2-split screen

Chameleon *1

Note: The chameleon screen

pattern is not available

with M2PT models.

The chameleon screen

pattern is only available

with 12 or 24-VDC

models.

Vertical 2-split

screen models

4-split screen

models

Horizontal 3-split

screen models

Vertical 3-split

screen models

White

The built-in

LED is colored.

Color

R (Red) Upper

W (White)

Lower

(3) Case Color

Note: M2PT model is available

in light gray only.

Symbol

Color

1Black

Light gray

(1)

Shape of Display

Symbol

Shape

Rectangular

A Square

T Round

Number of Built-in

LED Lamps

*2. These split screen models are available only as individual Units.

They cannot be ordered as sets.

Screen

pattern A3PJ A3PA A3PT

Single screen Built-in LED

models

Horizontal 2-

split screen ---

Vertical 2-split

screen

Horizontal 3-

split screen

Vertical 3-split

screen

4-split screen

*2--- ---

(4) Lighting Method

LED-lighted Models

(M2PJ and M2PA Only)

LED Lamp-lighted

Models (M2PT Only)

Note: M2PJ and M2PA can also be

ordered separately. Refer to

page 7 for details.

Incandescent Lamp

lighted Models

Symbol

Rated voltage

05E

5 VDC

12E

12 VDC

24E

24 VDC

Symbol

Rated voltage

05C

5 VDC

12C

12 VDC

24C

24 VDC

Symbol

Rated voltage

06 6 VAC/VDC

14 14 VAC/VDC

28 28 VAC/VDC

(5) Color of Display

For LED

•The chameleon screen pattern is not

available with M2PT models.

•The chameleon screen pattern is only

available with 12 or 24-VDC models.

For Incandescent Lamp

•Includes colored plate. Refer to page 8

for details.

•(Low-power incandescent lamp)

Symbol

Color

RRed

Orange

Green

White

Chameleon

Symbol

Color

No symbol

Red, Orange,

White, Blue,

Green

umber of Built-in

Incandescent Lamp

Screen

pattern

A3PJ A3PA A3PT

Single screen 2 1 2

Horizontal 2-

split screen 4

(Low-

power

incan-

descent

lamp)

2---

Vertical 2-split

screen --- ---

3-split,

E shape/

T shape

--- ---

4-split screen --- ---

M2P

Ordering Information

Ordering as a Set ................................. The model numbers used to order sets of Units are given in the following tables. One set comprises

the Display, Lamp, and Socket.

M2PJ (Rectangular) Single Screen Models

Note: Enter the desired color symbol for the Display in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White.

Example: Red MPJ-90A11-24E R

*1. You can change the screen colors of chameleon models between red, green, and orange by changing the terminal wiring. Refer to page 14 for details.

*2. Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use the appropriate

combination.

Note: Enter the desired color symbols for the Display in (1) and (2). (R) = Red, (O) = Orange, (G) = Green, (W) = White.

* Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use the appropriate

combination.

Case color Black Light gray Display color symbol

Lighting method

LED

5 VDC M2PJ-90A11-05E(1) M2PJ-90A12-05E(1) R

12 VDC M2PJ-90A11-12E(1) M2PJ-90A12-12E(1)

24 VDC M2PJ-90A11-24E(1) M2PJ-90A12-24E(1)

Chameleon 12 VDC M2PJ-90AG1-12EK M2PJ-90AG2-12EK *1

24 VDC M2PJ-90AG1-24EK M2PJ-90AG2-24EK

Incandescent

lamp

6 VDC/VAC M2PJ-90A11-06 M2PJ-90A12-06

14 VDC/VAC M2PJ-90A11-14 M2PJ-90A12-14

28 VDC/VAC M2PJ-90A11-28 M2PJ-90A12-28

Case color Black Light gray Display color symbol

Lighting method

LED 24 VDC M2PJ-90A21-24E(1)(2) M2PJ-90A22-24E(1)(2) R O G W

Incandes-

cent lamp

6 VDC/VAC M2PJ-90A21-06 ---

14 VDC/VAC M2PJ-90A21-14 M2PJ-90A22-14

28 VDC/VAC M2PJ-90A21-28 M2PJ-90A22-28

Example: Red Upper M2PJ-90A21-24E R W

White Lower Red White

Single

screen (1)

Rectangular

(Single Screen)

2-split

screen

(1)

(2)

Rectangular

(Single Screen)

Individual models: Refer to pages 6 to 8.

(The Display, Lamp, and Socket can be ordered separately.)

■ Specifications: Refer to the A3P.

■

Dimensions: Refer to page 11. Accessories: Refer to the A3P.

M2P

Ordering Information

Ordering as a Set ..................................The model numbers used to order sets of Units are given in the following tables. One set comprises

the Display, Lamp, and Socket.

M2PA (Square) Single Screen Models

Note: Enter the desired color symbol for the Display in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White.

Example: Red M2PA-90A11-24E R

*1. You can change the screen colors of chameleon models between red, green, and orange, by changing the terminal wiring. Refer to page 14 for details.

*2. Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use the appropriate

combination.

Note: Enter the desired color symbols for the Display in (1) and (2). (R) = Red, (O) = Orange, (G) = Green, (W) = White.

* Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use the appropriate

combination.

M2PT (Round) Single Screen Models

Note: Enter the desired color symbol for the Display in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White.

Example: Red M2PT-90A12-24C R

* Incandescent lamps are supplied with a colored plates (white, red, green, blue, and orange). Use the appropriate combination. Models A3PT and M2PT (round

models), however, are not supplied with legend plates.

Case color Black Light gray Display color symbol

Lighting method

LED

5 VDC M2PA-90A11-05E(1) M2PA-90A12-05E(1)

ROGW

12 VDC M2PA-90A11-12E(1) M2PA-90A12-12E(1)

24 VDC M2PA-90A11-24E(1) M2PA-90A12-24E(1)

Chameleon 12 VDC M2PA-90AG1-12EK M2PA-90AG2-12EK *1

24 VDC M2PA-90AG1-24EK M2PA-90AG2-24EK

Incandescent

lamp

6 VDC/VAC M2PA-90A11-06 M2PA-90A12-06

14 VDC/VAC M2PA-90A11-14 M2PA-90A12-14

28 VDC/VAC M2PA-90A11-28 M2PA-90A12-28

Case color Black Light gray Display color symbol

Lighting method

LED 24 VDC M2PA-90A21-24E(1)(2) M2PA-90A22-24E(1)(2) R O G W

Incandescent

lamp

6 VDC/VAC M2PA-90A21-06 M2PA-90A22-06

14 VDC/VAC M2PA-90A21-14 M2PA-90A22-14

28 VDC/VAC M2PA-90A21-28 M2PA-90A22-28

Example: Red Upper M2PA-90D21-24E R W

White Lower Red White

Case color Light gray Display color symbol

Lighting method

LED

5 VDC M2PT-90A12-05C(1)

ROGW

12 VDC M2PT-90A12-12C(1)

24 VDC M2PT-90A12-24C(1)

Incandescent

lamp 28 VDC/VAC M2PT-90A12-28 *

Square

(Single Screen)

Single

screen (1)

Square

(Horizontal 2-split screen)

2-split

screen

(1)

(2)

Round

(Single Screen)

Single

screen (1)

Individual models: Refer to pages 6 to 8.

(The Display, Lamp, and Socket can be ordered separately.)

■ Specifications: Refer to the A3P.

■

Dimensions: Refer to page 11. Accessories: Refer to the A3P.

M2P

Ordering Information

Illumination-only and Colored-illumination LED Models

“Illumination only” describes LED models for which the screen color is the same whether the LED is lit or not. The screen simply becomes brighter

when the LED lights.

Example: Red LED

“Colored illumination” describes LED models for which the screen color is white when the LED is not lit and changes to the color of the LED lamp

when the LED is lit.

Example: Red LED

Ordering: For a colored-illumination Indicator, order the Display, Lamp, and Socket as shown in the following table.

Display Lamp Socket

•Select the LED lamp-lighted model required

from the selection on page 7. Each assembly

includes the number of white colored plates

required to enable colored illumination for

the corresponding screen-split configuration.

For example, 4-split screen models includes

4 white colored plates.

•Select the LED lamps to suit your desired

coloration from the selection on page 8.

•Number of necessary LED lamps (standard):

M2PJ (rectangular): 4

M2PA (square): 2

M2PT (round): 2

•Select from the Sockets on page 8.

Legend plate (transparent)

Cap (transparent)

Not lit

Red

Colored plate (red)

Lamp holder

LED lamp (red) - - - Lamp

Display

Lit

Red

Legend plate (transparent)

Cap (transparent)

Not lit

White

Colored plate (white)

Lamp holder

LED lamp (red) - - - Lamp

Display

Lit

Red

M2P

Ordering Information

Ordering Individually....... Displays, Lamps, and Sockets can be ordered separately. Combinations that are not available as sets can be

created using individual Units. Also, store the parts as spares for maintenance and repairs.

* The Socket is compatible with LED-lighted, LED lamp-lighted, and incandescent lamp-lighted models.

LED-lighted/Chameleon Models

(LED is built into the Display.)

LED Lamp-lighted Models

(LED lamp and Display are separate.)

Incandescent Lamp-lighted Models

(Incandescent lamp and Display are separate.)

Display Display Display

Round (M2PT) models not available.

Lamp (LED Lamp) *1Lamp (Incandescent Lamp) *2

Socket *Socket * Socket *

*1. Number of necessary LED lamps. *2. Number of necessary incandescent lamps.

Screen pattern M2PJ M2PA M2PT Screen pattern M2PJ M2PA M2PT

Single screen

2 2 Single screen 2 1 2

Horizontal 2-split

screen 2--- Horizontal 2-split

screen 4

(low-

power in-

candes-

cent

lamp)

2 ---

Vertical 2-split

screen

--- ---

Vertical 2-split

screen

--- ---

Vertical 3-split screen

Horizontal 3-split screen

--- ---

Vertical 3-split screen

Horizontal 3-split screen

--- ---

4-split screen --- --- 4-split screen --- ---

•M2P@-5@@@-@@E

(for Indicator)

•M2P@-502@

(for Indicator)

•M2P@-501@

(for Indicator)

SLL-@@E@

•Standard lamp: SLL-@@

•Low-power lamp: SLL-@@H

•M2P@-7@@@-@

(for Indicator)

•M2P@-7@@@-@

(for Indicator)

•M2P@-7@@@-@

(for Indicator)

Ordering set combinations: Refer to pages 3 to 4. ■ Specifications: Refer to the A3P.

■

Dimensions: Refer to page 11. Accessories: Refer to the A3P.

M2P

Ordering Information

Ordering Individually .......Displays, Lamps, and Sockets can be ordered separately. Combinations that are not available as sets can be

created using individual Units. Also, store the parts as spares for maintenance and repairs.

LED-lighted Models (LED is built-in.)

Note: 1. A cap, legend plate (transparent), colored plate, white plunger case, and LED (with a current-limiting resistor) are built into the standard lighting unit.

2. Split-screen coloring configurations are given with the “ ” mark on the Sockets facing down.

LED Lamp-lighted Models (LED is not built-in.)

Display

Appearance Split-screen color

(color symbol) White (W) Red (R) Green (G) Orange (O) Selection precautions

Rectangular

models

Single

screen

M2PJ-5701-@@E M2PJ-5702-@@E M2PJ-5703-@@E M2PJ-5706-@@E•

Enter the voltage to be

used in the

at the

end of the model

number.

Examples of voltage

used:

5 V= 0 5 E

12 V= 1 2 E

24 V= 2 4 E

Horizontal 2-split

screen models

support only 24V.

•For the color of the

shaded part, select the

model according to the

colors given at the top

of the table.

Horizontal

2- 2 split

screen

M2PJ-5711-@@E M2PJ-5712-@@E M2PJ-5713-@@E M2PJ-5716-@@E

M2PJ-5721-@@E M2PJ-5722-@@E M2PJ-5723-@@E M2PJ-5726-@@E

M2PJ-5731-@@E M2PJ-5732-@@E M2PJ-5733-@@E M2PJ-5736-@@E

M2PJ-5741-@@E M2PJ-5742-@@E M2PJ-5743-@@E M2PJ-5746-@@E

Square

models

Single

screen

M2PA-5701-@@E M2PA-5702-@@E M2PA-5703-@@E M2PA-5706-@@E

Horizontal

2-split

screen

M2PA-5711-@@E M2PA-5712-@@E M2PA-5713-@@E M2PA-5716-@@E

M2PA-5721-@@E M2PA-5722-@@E M2PA-5723-@@E M2PA-5726-@@E

M2PA-5731-@@E M2PA-5732-@@E M2PA-5733-@@E M2PA-5736-@@E

M2PA-5741-@@E M2PA-5742-@@E M2PA-5743-@@E M2PA-5746-@@E

Model

Rectan-

gular

models

Square

models

Round

models Selection precautions

Screen pattern Screen Model Screen Model Screen Model

Single screen M2PJ-5021 M2PA-5021 M2PT-5021

•Colored plates (white, red, green, and orange), a legend

plate (transparent), and a light baffle (split-screen models

only) are included. Use the appropriate combination for

the LED coloring required.

•The number of white colored plates required to enable

colored illumination for the corresponding screen-split

configuration is included. (For example, 4-split screen

models include 4 white colored plates).

•The number of colored plates included for each model are

shown in the following table.

Horizontal 2-split

screen

M2PJ-5022 M2PA-5022 ---

Vertical 2-split

screen M2PJ-5023 --- ---

Horizontal 3-split

screen

M2PJ-5024 --- ---

Vertical 3-split

screen

M2PJ-5025 --- ---

4-split screen M2PJ-5026 --- ---

White

Red

Green

Orange

White

Red

Green

Orange

Screen pattern White Red

Green

Orange

Single screen 1 1 1 1

Horizontal 2-split screen

Vertical 2-split screen

2111

Horizontal 3-split screen

Vertical 3-split screen

3222

4-split screen 4 1 1 1

Ordering set combinations: Refer to pages 3 to 4. ■ Specifications: Refer to the A3P.

■

Dimensions: Refer to page 11. Accessories: Refer to the A3P.

M2P

Ordering Information

Ordering Individually...........Displays, Lamps, and Sockets can be ordered separately. Combinations that are not available as sets can

be created using individual Units. Also, store the parts as spares for maintenance and repairs.

Incandescent Lamp-lighted Models (Incandescent lamp is not built-in.)

Chameleon Models (with Built-in LED)

LED Lamp

Incandescent Lamp

Display

Model

Rectan-

gular

models

Square

models

Round

models Selection precautions

Screen pattern Screen Model Model Model Model Model

Single screen M2PJ-5011 M2PA-5011

M2PT-5011

•Colored plates (white, red, green, orange, and blue), a legend

plate (transparent), and a light baffle (split-screen models only)

are supplied.

* M2PT (round) models do not contain a legend plate.

•The number of colored plates supplied is shown in the following

table.

Horizontal 2-

split screen M2PJ-5012 M2PA-5012 ---

Vertical 2-split

screen M2PJ-5013 --- ---

Horizontal 3-

split screen M2PJ-5014 --- ---

Vertical 3-split

screen M2PJ-5015 --- ---

4-split screen M2PJ-5016 --- ---

Shape Rated voltage

Chameleon indicator

Rectangular

12 VDC M2PJ-5800-12E

Note: 1. With the chameleon models, the whole screen lights red, green,

or orange (i.e., red and green simultaneously).

2. A cap, legend plate (transparent), white colored plate, and LED

(with a current-limiting resistor) are built into the Display.

24 VDC M2PJ-5800-24E

Square

12 VDC M2PA-5800-12E

24 VDC M2PA-5800-24E

Lamp (For mounting, refer to the A3P.)

Voltage 5 VDC 12 VDC 24 VDC Applicable cap (color)

(colored plate) Selection precautions

Color Model (DC only) Model (DC only) Model (DC only)

Red SLL-05ER SLL-12ER SLL-24ER Red

In the standard setup, 4 LED lamps are

used with M2PJ models and 2 LED lamps

are used with M2PA and M2PT models.

Yellow SLL-05EY SLL-12EY SLL-24EY Orange

Green SLL-05EG SLL-12EG SLL-24EG Green

White SLL-05EW SLL-12EW SLL-24EW White

Voltage

Lamp type

Standard lamp Low-voltage lamp Selection precautions

5 VAC/VDC SLL-06 SLL-06H •In the standard setup for M2PJ models, 2 lamps are used with single screen models, and

4 lamps are used with split-screen models. If 3 or 4 lamps are lit continuously, use low-

power lamps.

•In the standard setup for M2PA models, 1 lamp is used with single screen models, and 2

lamps are used with split-screen models.

•In the standard setup for M2PT models, 2 lamps are used.

12 VAC/VDC SLL-14 SLL-14H

24 VAC/VDC SLL-28 SLL-28H

Socket (common to both incandescent lamp-lighted and LED-lighted models)

Rectangular Square Round Selection precautions

Model Model Model

M2PJ-7010-1 M2PA-7010-1 M2PT-7010-2

•The end digit denotes the color of the flange: -1 denotes a

black flange, and -2 denotes a light gray flange. Round

switches are available only in light gray, and not in black.

Screen pattern White Red

Green

Orange Blue

Single screen 11111

Horizontal 2-split screen

Vertical 2-split screen

11111

Horizontal 3-split screen

Vertical 3-split screen

22222

4-split screen 2 2 2 2 2

Ordering set combinations: Refer to pages 3 to 4. ■ Specifications: Refer to the A3P.

■

Dimensions: Refer to page 11. Accessories: Refer to the A3P.

M2P

Ordering Information

Accessories

Accessories are the same as those for the A3P Lighted Pushbutton

Switches. Refer to the A3P.

LED and Incandescent Lamp Ratings and

Characteristics

Ratings and characteristics the same as those for the A3P Lighted

Pushbutton Switches. Refer to the A3P.

Approved Standard Ratings

UL (File No. E41515), CSA (File No. LR45258)

LED: 24 VDC max.

Incandescent lamp: 28 VAC/VDC,1.2 W max.

Note: Certification has been obtained for the Indicator.

For detailed information on individual products that have received

certification, consult your supplier.

Nomenclature

Construction

LED-lighted models

LED-lighted models LED lamp-lighted models Incandescent

lamp-lighted models

Cap

(transparent)

Legend plate

(transparent)

Colored plate

LED Unit

Built-in

LED

Chameleon models (full screen

illumination in one of three colors)

Cap

(transparent)

Legend plate

(transparent)

LED Unit

3-color emitter

Colored plate

Cap

(transparent)

Legend plate *

(transparent)

Colored plate

Lamp holder

Display

Lamp

Socket

●Display Colors:

· LED-lighted and LED

lamp-lighted models

White, Red, Green, Orange

· Incandescent lamp-lighted models

White, Red, Green, Blue, Orange

* Incandescent lamp-lighted

M2PT models do not contain

legend plates.

●Case Color

Select either black or light gray

to suit your panel design. (The

round M2PT models are available

in light gray only.)

(Split-screen models

contain light baffles.)

Lighting

method

LED-lighted models

(LED is built-in.)

LED lamp-lighted models

(LED is not built-in.)

Incandescent lamp-lighted models

(Incandescent lamp is not built-in.)

Models

M2PJ M2PA

M2PJ

M2PA M2PT

M2PJ

M2PA M2PT

Screen pat-

tern

Single

screen

Single

screen

Single

screen

Vertical 3-split

screen

Single

screen

Single

screen

Single

screen

Vertical 3-split

screen

Single

screen

Single

screen

Horizontal 2-

split screen

Horizontal 2-

split screen

Horizontal 2-

split screen

Horizontal 3-

split screen

Horizontal

2-split

screen

Horizontal 2-

split screen

Horizontal 3-

split screen

Horizontal

2-split

screen

Chameleon

(3-color)

Chameleon

(3-color)

Vertical 2-

split screen 4-split

screen

Vertical 2-

split screen 4-split

screen

Note: The above diagram for LED lamp-lighted and incandescent lamp-lighted models shows the M2PJ model.

M2P

Nomenclature

M2P Lighting Method Diagram

Single screen

models

LED

models

Incandescent

lamplighted models

LED-lighted

models

LED lamp-lighted

models

Chameleon

models

Horizontal 2-split

screen models

M2PJ

(rectangular)

M2PA

(square)

M2PT

(round)

Single screen

models

Single screen models

Vertical 3-split

screen models

Horizontal 3-split

screen models

4-split screen

models

Vertical 3-split

screen models*

Horizontal 3-split

screen models*

4-split screen

models*

Horizontal 2-split

screen models

(Full screen illumination in

one of three colors)

Vertical 2-split

screen models

Single screen

models

Horizontal 2-split

screen models

Single screen

models

Horizontal 2-split

screen models

Single screen

models

Horizontal 2-split

screen models

Single screen

models

Single screen models

Horizontal 2-split

screen models

Vertical 2-split

screen models*

LED

models

LED

models

Incandescent

lamplighted models

Incandescent

lamplighted models

LED-lighted

models

LED lamp-lighted

models

LED lamp-lighted

models

Chameleon

models

•As a set: See page 3.

•Individually: See page 6.

(Not available as a set.)

•As a set: See page 3.

•Individually: See page 6.

As a set: See page 3.

Individually: See page 6.

*Models indicated with an asterisk are only

available individually.

•As a set: See page 3.

•Individually: See page 6.

•As a set: See page 3.

•Individually: See page 6.

(Not available as a set.)

•As a set: See page 3.

•Individually: See page 6.

•As a set: See page 3.

•Individually: See page 6.

•As a set: See page 3.

•Individually: See page 6.

M2P

Dimensions (Unit: mm)

Note: Use a panel thickness of 0.5 mm for tab terminals #110 and solder terminals.

Accessory Mounting Dimensions

Dimensions for mounting accessories are the same as those for the A3P Lighted Pushbutton Switches. Refer to the A3P.

2.8

#110 quick connect terminal

/soldered terminal

OMRON logo

26.1 29.9±0.2

25±0.1

32±0.1

18.9

6.7 43.6

52 max.

22.9±0.2

0.5

M2PJ (Rectangular) Models

OMRON logo #110 quick connect terminal

/soldered terminal

43.6

22.9±0.2

6.7

52 max.

@19.1

25±0.1

M2PA (Square) Models

22.4 28.5 dia.

OMRON logo

23.8

43.6

32 dia.

24.9 dia.

6.4

52 max.

#110 quick connect terminal/soldered terminal

M2PT (Round) Models

M2P

Dimensions (Unit: mm)

Panel Cutout

M2PJ (Rectangular) Models

Note: 1. n: Number of Units

2. Recommended panel thickness: 1 to 5 mm

3. Mount the panel before mounting the Switch Guard.

4. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the coating.

M2PA (Square) Models

Note: 1. n: Number of Units

2. Recommended panel thickness: 1 to 5 mm

3. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the coating.

M2PT (Round) Models

Classification Mounting design Panel cutout Remarks

Flange

mount

models

Individual mount-

ing (Horizontal)

Panel cutout spacing between rows of

Units:

Multiple mount-

ing (Horizontal)

Individual mount-

ing (Vertical)

Mount to long mount-

ing plate (A3PJ-

3002) before use.

Multiple mount-

ing (Vertical)

Mount to long mount-

ing plate (A3PJ-

3002) before use.

Barrier

mount

models

Individual mount-

ing (Horizontal) For barrier mount models, refer to Ac-

cessories on the A3P.

Panel cutout spacing between rows of

Units:

Dotted line indicates the position of each

mounting barrier.

Multiple mount-

ing (Horizontal)

Individual mount-

ing (Vertical)

Mount to long mount-

ing plate (A3PJ-

3002) before use.

Multiple mount-

ing (Vertical)

Mount to long mount-

ing plate (A3PJ-

3002) before use.

Classification Mounting design Panel cutout Remarks

Flange

mount

models

Individual mount-

ing

Panel cutout spacing between rows of

Units:

Multiple mount-

ing

Barrier

mount

models

Individual mount-

ing

Panel cutout spacing between rows of

Units:

Dotted line indicates the position of each

mounting barrier.

Multiple mount-

ing

32±0.1

25±0.1 30.5±0.3

23.5±0.3

3 min.

6 min.

32n±0.5

12 n

25±0.1 32n-1.5

±0.3

23.5

±0.3

25±0.1

32±0.1

23.5±0.3

30.5±0.3

25n±0.5

12n

32±0.1

25n-1.5±0.3

30.5±0.3

27 36.4±0.3

23.5±0.3

6 min.

1.3

33n+6±1

n21

27 32.9n+3.5±0.3

23.5±0.3

32±0.1

29.4±0.3

30.5±0.3

34 n12

26n+6±1

25.9n+3.5±0.3

30.5±0.3

25±0.1

22.5±0.3

23.5±0.3

33 min.

6 min.

25n±0.1

12 n

25±0.1

25n-2.5±0.3

23.5±0.3

27.8±0.3

23.5±0.3

6 min.

1.3

6 min.

26n+6.5±1

1n2

26n+2.5±0.3

23.5±0.3

4 min.

6.4 dia.

29±0.3 dia.

R11.8+0.2

−0

Note: 1. Recommended panel thickness: 1 to 5 mm

2. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after

the coating

M2P

Dimensions (Unit: mm)

Terminal connections

LED-lighted Models

Rated voltage

5 VDC 12 VDC 24 VDC

Model Screen

pattern

M2PJ

Single

screen

2-split

screen

M2PA

Single

screen

2-split

screen

NO1

NC1

L4−

L3−

L1−

L2−

LC+

Terminal

arrangement

BOTTOM VIEW TOP VIEW

Lighting block

NO1

NC1

L4−

L3−

L1−

L2−

LC+

Terminal

arrangement

BOTTOM VIEW TOP VIEW

Lighting block

NO1

NC1

L4−

L3−

L1−

L2−

LC+

Terminal

arrangement

BOTTOM VIEW TOP VIEW

Lighting block

NO1

NC1

L4−

L3−

L1−

L2−

LC+

Terminal

arrangement

BOTTOM VIEW TOP VIEW

Lighting block

NO1

NC1

L4−

L3−

L1−

L2−

LC+

Terminal

arrangement

BOTTOM VIEW TOP VIEW

Lighting block

Terminal

arrangement

BOTTOM VIEW TOP VIEW

NO1

NC1

−

LC+

Terminal

arrangement

BOTTOM VIEW TOP VIEW

Lighting bloc

NO1

NC1

−

LC+

Terminal

arrangement

BOTTOM VIEW TOP VIEW

Lighting bloc

NO1

NC1

−

LC+

Terminal

arrangement

BOTTOM VIEW TOP VIEW

Lighting bloc

NO1

NC1

−

LC+

NO1

NC1

−

LC+

Terminal

arrangement

BOTTOM VIEW TOP VIEW

Lighting bloc

M2P

Incandescent Lamp-lighted/LED Lamp-lighted Models

(All are shown with the OMRON logo facing down. The terminal arrangements are the same as for the LED-lighted models.)

LED Chameleon Models

Terminal Arrangement and Coloring

Chameleon Models

Safety Precautions

Refer to Safety Precautions for All Pushbutton Switches/Indicators and Safety Precautions for the A3P.

Model Rectangular M2PJ models Square M2PA models Round M2PT models

Type

Indicator

Rated voltage 24 VDC

Model

Rectangular M2PJ

model

Square M2PA model

Wiring

LC+ LC+ LC+

L1- L2- L1- and L2-

shorted

Coloring Green Red Orange

BOTTOM VIEW TOP VIEW

Terminal

arrangement

Lighting block

L4−

LC+

L1−

L2−

L3−

BOTTOM VIEW TOP VIEW

Terminal

arrangement

Lighting bloc

LC+ L1−

L2−

LC+

BOTTOM VIEW TOP VIEW

Terminal

arrangement

Lighting bloc

L2−

L1−

L4−

LC+

L1−

L2−

L3−

LC+

L1−

L2−

Read and Understand This Catalog

Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or

comments.

Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)

from date of sale by OMRON.

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR

FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS

DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS

IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT

LIABILITY.

In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.

IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS

OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT

SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.

Application Considerations

SUITABILITY FOR USE

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's

application or use of the products.

At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the

products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,

machine, system, or other application or use.

The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible

uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:



Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.



Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,

safety equipment, and installations subject to separate industry or government regulations.



Systems, machines, and equipment that could present a risk to life or property.

Please know and observe all prohibitions of use applicable to the products.

NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE

SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND

INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

PROGRAMMABLE PRODUCTS

OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.

Disclaimers

CHANGE IN SPECIFICATIONS

Product specifications and accessories may be changed at any time based on improvements and other reasons.

It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.

However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or

establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual

specifications of purchased products.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

PERFORMANCE DATA

Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the

result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON

Warranty and Limitations of Liability.

ERRORS AND OMISSIONS

The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,

typographical, or proofreading errors, or omissions.

2012.9

In the interest of product improvement, specifications are subject to change without notice.

OMRON Corporation

Industrial Automation Company

http://www.ia.omron.com/