Silizium-PIN-Fotodiode mit sehr kurzer Schaltzeit in SMR(R) Gehause Silicon PIN Photodiode with Very Short Switching Time in SMR(R) Package Lead (Pb) Free Product - RoHS Compliant SFH 2500/FA SFH 2505/FA SFH 2500 SFH 2500FA SFH 2505 SFH 2505FA Wesentliche Merkmale Features * Speziell geeignet fur Anwendungen im Bereich von 400 nm bis 1100 nm (SFH 2500/2505) und bei 880 nm (SFH 2500 FA/2505 FA) * SMR(R) (Surface Mount Radial) Gehause * Kurze Schaltzeit (typ. 5 ns) * Passend zu IRED SFH 451x, SFH 458x, SFH 450x * Fur Oberflachenmontage (SMT) geeignet * Gegurtet lieferbar * Especially suitable for applications from 400 nm to 1100 nm (SFH 2500/2505) and of 880 nm (SFH 2500 FA/2505 FA) * SMR(R) (Surface Mount Radial) package * Short switching time (typ. 5 ns) * Matches IRED SFH 451x, SFH 458x, SFH 450x * Suitable for surface mounting (SMT) * Available on tape and reel Anwendungen Applications * Industrieelektronik * Messen/Steuern/Regeln" * Schnelle Lichtschranken fur Gleich- und Wechselbetrieb * Datenubertragung * * * * 2007-04-03 1 Industrial electronics For control and drive circuits Photointerrupters Data transmission SFH 2500/FA, SFH 2505/FA Typ Type Bestellnummer Ordering Code Gehause Package SFH 2500 Q65110A1201 SFH 2505 Q65110A1203 SFH 2500 FA Q65110A1202 SFH 2505 FA Q65110A1204 5-mm-SMR(R)-Gehause (T 1 3/4), klares (SFH 2500/2505) und schwarz eingefarbtes (SFH 2500 FA/2505 FA) Epoxy-Gieharz, Anschlusse (SFH 2500/2500 FA gebogen, SFH 2505/2505 FA gerade) im 2.54-mm-Raster (1/10''), Kathodenkennzeichnung: siehe Mazeichnung. 5 mm SMR(R) package (T 1 3/4), clear (SFH 2500/2505) and black-colored (SFH 2500 FA/2505 FA) epoxy resin, solder tabs (SFH 2500/2500 FA bent, SFH 2505/2505 FA straight) lead spacing 2.54 mm (1/10''), cathode marking: see package outline. Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebs- und Lagertemperatur Operating and storage temperature range Top; Tstg - 40 ... + 85 C Sperrspannung Reverse voltage VR 50 V Verlustleistung Total power dissipation Ptot 100 mW 2007-04-03 2 SFH 2500/FA, SFH 2505/FA Kennwerte (TA = 25 C) Characteristics Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit SFH 2500 SFH 2505 SFH 2500 FA SFH 2505 FA IP 100 - A IP 70 (> 50) 70 (> 50) A Wellenlange der max. Fotoempfindlichkeit Wavelength of max. sensitivity S max 850 900 nm Spektraler Bereich der Fotoempfindlichkeit S = 10% von Smax Spectral range of sensitivity S = 10% of Smax 400 ... 1100 750 ... 1100 nm Bestrahlungsempfindliche Flache Radiant sensitive area A 1 1 mm2 1x1 1x1 mmxmm Fotostrom Photocurrent VR = 5 V, Normlicht/standard light A, T = 2856 K, EV = 1000 lx VR = 5 V, = 870 nm, Ee = 1 mW/cm2 Abmessung der bestrahlungsempfindlichen Flache L x B Dimensions of radiant sensitive area LxW Halbwinkel Half angle 15 15 Grad deg. Dunkelstrom, VR = 20 V Dark current IR 0.1 ( 5) 0.1 ( 5) nA Leerlaufspannung Open-circuit voltage Ev = 1000 Ix, Normlicht/standard light A, T = 2856 K Ee = 0.5 mW/cm2, = 870 nm VO 430 - mV VO 390 (> 320) 390 (> 320) mV Kurzschlussstrom Short-circuit current Ev = 1000 Ix, Normlicht/standard light A, T = 2856 K Ee = 1.0 mW/cm2, = 870 nm ISC 100 - A ISC 70 70 A Anstiegs- und Abfallzeit des Fotostromes Rise and fall time of the photocurrent RL = 50 ; VR = 20 V; = 850 nm; Ip = 800 A tr , tf 5 5 ns Kapazitat, VR = 0 V, f = 1 MHz, E = 0 Capacitance C0 11 11 pF 2007-04-03 3 SFH 2500/FA, SFH 2505/FA Kennwerte (TA = 25 C) Characteristics (cont'd) Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit SFH 2500 SFH 2505 SFH 2500 FA SFH 2505 FA TCV - 2.6 - 2.6 mV/K TCI 0.18 0.1 - 0.1 %/K Rauschaquivalente Strahlungsleistung Noise equivalent power VR = 20 V, = 850 nm NEP 2.9 x 10- 14 2.9 x 10- 14 Nachweisgrenze, VR = 20 V, = 850 nm Detection limit D* 3.5 x 1012 3.5 x 1012 Temperaturkoeffizient von VO Temperature coefficient of VO Temperaturkoeffizient von ISC Temperature coefficient of ISC Normlicht/standard light A = 870 nm 2007-04-03 4 W -----------Hz cm x Hz -------------------------W SFH 2500/FA, SFH 2505/FA Relative Spectral Sensitivity Srel = f () SFH 2500/2505 Relative Spectral Sensitivity Srel = f () SFH 2500 FA/2505 FA OHF01034 100 OHF01773 100 S rel % S rel % 80 80 60 60 Photocurrent IP = f (Ev), VR = 5 V Open-Circuit Voltage VO = f (Ev) SFH 2500/2505 OHF00301 10 3 P A 10 4 mV 10 2 10 3 VO VO 10 1 40 40 20 20 10 2 P 10 0 0 400 600 0 400 1000 nm 1200 800 OHF00302 10 3 P 800 1000 nm 1200 Photocurrent IP = f (Ee), VR = 5 V Open-Circuit-Voltage VO = f (Ee) SFH 2500 FA/2505 FA A 600 Total Power Dissipation Ptot = f (TA) 10 4 mV Ptot VO 10 -1 10 0 10 1 10 2 10 0 lx 10 4 10 3 Ev Dark Current IR = f (VR), E = 0 OHF00392 120 mW 10 1 R OHF01026 10 4 pA 100 10 3 10 2 10 3 80 VO 10 1 10 2 60 P 10 2 40 10 0 10 1 20 10 -1 10 -3 10 -2 10 -1 mW/cm 2 Ee 10 0 10 1 0 0 20 40 60 80 100 C 120 TA Directional Characteristics Srel = f () 40 30 20 10 0 OHF00303 1.0 50 0.8 60 0.6 70 0.4 80 0.2 0 90 100 1.0 2007-04-03 0.8 0.6 0.4 0 20 40 60 80 100 5 120 10 1 0 10 20 V VR 30 SFH 2500/FA, SFH 2505/FA Mazeichnung Package Outlines SFH 2500/FA 5.5 (0.217) 2.8 (0.110) 2.4 (0.094) 14.7 (0.579) 13.1 (0.516) 2.54 (0.100) spacing 3.3 (0.130) -0.1...0.2 (-0.004...0.008) 3.7 (0.146) 6.0 (0.236) 5.4 (0.213) 4.5 (0.177) 3.9 (0.154) 7.7 (0.303) 7.1 (0.280) Cathode/ Collector ((3.2) (0.126)) ((R2.8 (0.110)) ((3.2) (0.126)) 4.4 (0.173) 2.05 (0.081) R 1.95 (0.077) 4.8 (0.189) 7.5 (0.295) 2.7 (0.106) 2.4 (0.094) Chip position 4.5 (0.177) 3.9 (0.154) GEOY6968 SFH 2505/FA Cathode/ Collector 4.8 (0.189) 4.4 (0.173) 2.54 (0.100) spacing 15.5 (0.610) 14.7 (0.579) 4.5 (0.177) 3.9 (0.154) 7.7 (0.303) 7.1 (0.280) ((3.2) (0.126)) ((R2.8 (0.110)) ((3.2) (0.126)) 6.0 (0.236) 5.4 (0.213) GEOY6969 Mae in mm (inch) / Dimensions in mm (inch). 2007-04-03 -0.15...0.15 (-0.006...0.006) 7.4 (0.291) 2.7 (0.106) 2.4 (0.094) 8.0 (0.315) Chip position 4.5 (0.177) 3.9 (0.154) 2.05 (0.081) R 1.95 (0.077) 6 SFH 2500/FA, SFH 2505/FA Lotbedingungen Soldering Conditions Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile C T Vorbehandlung nach JEDEC Level 3 Preconditioning acc. to JEDEC Level 3 (nach J-STD-020C) (acc. to J-STD-020C) 255 C 240 C 250 C 260 C +0 -5 C 5 245 C C C 235 C +5 -0 C 217 C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 Ramp Up 3 K/s (max) 50 25 C 0 0 50 100 150 200 250 s 300 t Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com (c) All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2007-04-03 7