www.element14.com
www.farnell.com
www.newark.com
Page <1> V1.010/07/12
MCR13-432
Toggle Switches
Features
•  Material : Metal lever and bushing are nickel plated metal
•  Terminals are nickel plated brass
•  Base is phenolic
•  Waterproof boot (W-72) is optional
Specications
Rating  :  18A 125V / 10A 250V AC 
3/4HP 125 - 250V AC 
(A.C.D.N.R) 
16A 125V / 10A 250V AC 
3/4HP 125 - 250V AC 
(G.H.I)
Contact resistance  : 50mΩ Max.
Insulation resistance  : DC 500V 100MΩ Min.
Dielectric strength  : AC 1,500V 1 minute
Dimensions : Millimeters
Description Part Number
Switch, Toggle, 3PDT ON-ON, SQ MCR13-432C1-01
Switch, Toggle, 3PDT ON-OFF-ON, SQ MCR13-432D1-01
Part Number Table
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted 
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change 
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any 
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any  
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the 
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. 
Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
MCR13-432