Data sheet
VSSC
VSSC6TRSLFG24VAC/DC0.5A
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date July 9, 2018 2:26:25 PM CEST
Catalogue status 29.06.2018 / We reserve the right to make technical changes. 3
Rated data IEC / EN
Dielectric strength at FG against PE ≥ 500 V Discharge current Imax (8/20µs) GND-PE 10 kA
Discharge current Imax (8/20µs) wire-PE 10 kA Discharge current In (8/20µs) GND-PE 2.5 kA
Discharge current In (8/20µs) wire-PE 2.5 kA Discharge current, max. (8/20 µs) 10 kA
Fuse 0.5 A Insertion loss 3.3 MHz
Leakage current at Un
2.8 mA
Lightning test current, Iimp (10/350 µs)
Wire–PE 10 kA
Max. continuous voltage, Uc (AC) 30 V Max. continuous voltage, Uc (DC) 42 V
Overload - failure mode Modus 2 Protection level UP (typ.) 150 V
Protection level on output side Wire-wire
1 kV/µs, typically 70 V
Protection level, UP GND - PE
1,400 V
Pulse-reset capacity ≤ 20 ms Rated current IN500 mA
Rated voltage (AC) 24 V Rated voltage (DC) 34 V, 24 V
Requirements category acc. to IEC
61643-21 C2, C3, D1
Signal transmission properties (-3 dB)
3.2 MHz
Standards
IEC 61643-21
Surge current-carrying capacity C2 2.5 kA 8/20 µs 5 kV
1.2/50 µs
Surge current-carrying capacity C3 10 A 10/1000 µs Surge current-carrying capacity D1 1 kA 10/350 μs
Voltage type AC/DC Volume resistance 1.8 Ω 10 %
Further details of approvals
GOST certificate GOST-Zertifikat
Connection data
Type of connection Screw connection, Torx®
T15, Slotted 0.8 x 4
Tightening torque, min.
0.5 Nm
Tightening torque, max. 0.8 Nm Clamping range, min. 0.5 mm²
Clamping range, max. 4 mm² Wire cross-section, solid, min. 0.5 mm²
Wire cross-section, solid, max.
6 mm²
Conductor cross-section, flexible, AEH
(DIN 46228-1), min. 0.5 mm²
Conductor cross-section, flexible, AEH
(DIN 46228-1), max. 4 mm²
Connection cross-section, stranded, min.
0.5 mm²
Connection cross-section, stranded,
max. 4 mm²
Rated data UL
Certificate No. (UL) E311081 UL certificate UL Zertifikat
Ratings IECEx/ATEX/cUL
cUL certificate cUL Certificate
Classifications
ETIM 3.0 EC000943 ETIM 5.0 EC000943
ETIM 6.0 EC000943 UNSPSC 30-21-19-21
eClass 5.1 27-13-08-01 eClass 6.2 27-13-08-05
eClass 7.1 27-13-08-09 eClass 8.1 27-13-08-11
eClass 9.0 27-13-08-11 eClass 9.1 27-13-08-07