Revised January 1999 MM88C29 * MM88C30 Quad Single-Ended Line Driver * Dual Differential Line Driver General Description The MM88C30 is a dual differential line driver that also performs the dual four-input NAND or dual four-input AND function. The absence of a clamp diode to VCC in the input protection circuitry of the MM88C30 allows a CMOS user to interface systems operating at different voltage levels. Thus, a CMOS digital signal source can operate at a VCC voltage greater than the VCC voltage of the MM88C30 line driver. The differential output of the MM88C30 eliminates ground-loop errors. The MM88C29 is a non-inverting single-wire transmission line driver. Since the output ON resistance is a low 20 typ., the device can be used to drive lamps, relays, solenoids, and clock lines, besides driving data lines. Features Wide supply voltage range: High noise immunity: 3V to 15V 0.45 VCC (typ.) Low output ON resistance: 20 (typ.) Ordering Code: Order Number Package Number Package Description MM88C29N N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide MM88C30M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150" Narrow MM88C30N N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Devices also available in Tape and Reel. Specify by appending suffix letter "X" to the ordering code. Connection Diagrams Pin Assignments for DIP and SOIC MM88C30 Pin Assignments for DIP MM88C29 Top View Top View (c) 1999 Fairchild Semiconductor Corporation DS005908.prf www.fairchildsemi.com MM88C29 * MM88C30 Quad Single-Ended Line Driver * Dual Differential Line Driver October 1987 MM88C29 * MM88C30 Logic Diagrams 1/4 MM88C29 1/2 MM88C30 www.fairchildsemi.com 2 Voltage at Any Pin (Note 2) Operating Temperature Range Average Current at Output -0.3V to VCC +16V -40C to +85C Small Outline 500 mW 260C Note 1: "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. Except for "Operating Temperature Range" they are not meant to imply that the devices should be operated at these limits. The Electrical Characteristics tables provide conditions for actual device operation. 3V to 15V 18V Absolute Maximum VCC 150C (Soldering, 10 seconds) 700 mW Operating VCC Range 25 mA Lead Temperature Power Dissipation (PD) Dual-In-Line 50 mA MM88C29 Maximum Junction Temperature, Tj -65C to +150C Storage Temperature MM88C30 Note 2: AC Parameters are guaranteed by DC correlated testing. DC Electrical Characteristics Min/Max limits apply across temperature range unless otherwise noted Symbol Parameter Conditions Min Typ Max Units CMOS TO CMOS VIN(1) Logical "1" Input Voltage VCC = 5V 3.5 VCC = 10V 8 VIN(0) Logical "0" Input Voltage VCC = 5V IIN(1) Logical "1" Input Current VCC = 15V, VIN = 15V IIN(0) Logical "0" Input Current VCC = 15V, VIN = 0V ICC Supply Current VCC = 5V V V 1.5 VCC = 10V 0.005 -1 2 V 1 A 100 mA -0.005 0.05 V A OUTPUT DRIVE ISOURCE ISINK Output Source Current VOUT = VCC - 1.6V, VCC 4.75V, Tj = 25C -47 -80 mA Tj = 85C -32 -60 mA MM88C29 VOUT = VCC - 0.8V -2 -20 mA MM88C30 VCC 4.5V Tj = 25C 9.5 22 mA Tj = 85C 8 18 mA Output Sink Current VOUT = 0.4V, VCC = 4.75V, VOUT = 0.4V, VCC = 10V, ISOURCE ISINK Output Source Resistance Output Sink Resistance Tj = 25C 19 40 mA Tj = 125C 15.5 33 mA VOUT = VCC - 1.6V, VCC 4.75V, Tj = 25C 20 34 Tj = 85C 27 50 Tj = 25C 18 41 Tj = 85C 22 50 Tj = 25C 10 21 Tj = 85C 12 26 VOUT = 0.4V, VCC = 4.75V, VOUT = 0.4V, VCC = 10V, Output Resistance Temperature Coefficient JA Source 0.55 Sink 0.40 %/C 150 C/W Thermal Resistance %/C (N-Package) 3 www.fairchildsemi.com MM88C29 * MM88C30 Absolute Maximum Ratings(Note 1) MM88C29 * MM88C30 AC Electrical Characteristics (Note 2) TA = 25C, CL = 50 pF Symbol tpd Parameter Logical "1" or "0" MM88C29 MM88C30 tpd Differential Propagation Delay Time to Logical "1" or "0" MM88C30 CIN CPD Conditions Min Typ Max Units VCC = 5V 80 200 ns VCC = 10V 35 100 ns VCC = 5V 110 350 ns VCC = 10V 50 150 ns VCC = 5V 400 ns VCC = 10V 150 ns Propagation Delay Time to (See Figure 1) RL = 100, CL = 5000 pF (See Figure 2) Input Capacitance MM88C29 (Note 3) 5.0 pF MM88C30 (Note 3) 5.0 pF MM88C29 (Note 3) 150 pF MM88C30 (Note 3) 200 pF Power Dissipation Capacitance Note 3: Capacitance is guaranteed by periodic testing. Note 4: CPD determines the no load AC power consumption of any CMOS device. For complete explanation see Family Characteristics application note AN-90 (CMOS Logic Databook). AC Test Circuits FIGURE 1. FIGURE 2. www.fairchildsemi.com 4 MM88C29 * MM88C30 Typical Applications Digital Data Transmission Note A: Exact value depends on line length. Note B: Optional to control response time. Note C: VCC= 4.5V to 5.5V for the DS7820, VCC=4.5V to 15V for the DS78C20. VCC is 3V to 15V. Typical Data Rate vs Transmission Line Length Note: The transmission line used was #22 gauge unshielded twisted pair (40k termination). Note: The curves generated assume that both drivers are driving equal lines, and that the maximum power is 500 mW/package. 5 www.fairchildsemi.com MM88C29 * MM88C30 Typical Performance Characteristics MM88C29 Typical Propagation Delay vs Load Capacitance MM88C30 Typical Propagation Delay vs Load Capacitance MM88C29 Typical Propagation Delay vs Load Capacitance Typical Sink Current vs Output Voltage Typical Source Current vs Output Voltage MM88C30 Typical Propagation Delay vs Load Capacitance www.fairchildsemi.com 6 MM88C29 * MM88C30 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150" Narrow Package Number M14A 7 www.fairchildsemi.com MM88C29 * MM88C30 Quad Single-Ended Line Driver * Dual Differential Line Driver Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N14A LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or systems device or system whose failure to perform can be reawhich, (a) are intended for surgical implant into the sonably expected to cause the failure of the life support body, or (b) support or sustain life, and (c) whose failure device or system, or to affect its safety or effectiveness. to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the www.fairchildsemi.com user. Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications.