P16E15.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. o Part Numbering CERALOCKr (MHz) (Part Number) CS T CE 16M0 V53 *** -R0 q w e r t y u qProduct ID tDesign Product ID CS Ceramic Resonators wFrequency/Capacitance Code Frequency/Capacitance A MHz No capacitance built-in T MHz Built-in Capacitance Code Design Gpp Thickness Shear mode T/Vpp Thickness Expander mode Xpp Thickness Expander mode (3rd overtone) pp indicates initial frequency tolerance and load capacity. yIndividual Specification Code Individual Specification *** Three-digit alphanumerics express "Individual Specification". eStructure/Size Code Structure/Size LS Round Lead Type CC Cap Chip Type With standard products, "yIndividual Specification" is omitted, and "uPackage Specification Code" is carried up. CR/CE/CG Small-cap Chip Type CV Monolithic Chip Type CW Small Monolithic Chip Type uPackaging Packaging Code -B0 Bulk rNominal Center Frequency -A0 Radial Taping H0=18mm Expressed by four-digit alphanumerics. The unit is in hertz (Hz). Decimal point is expressed by capital letter "M". -R0 Plastic Taping o=180mm -R1 Plastic Taping o=330mm Radial taping is applied to lead type and plastic taping to chip type. CERALOCKr (kHz) (Part Number) CS B FB 500K J58 *** -R1 q w e r t y u qProduct ID tDesign Product ID CS Ceramic Resonators wFrequency/Capacitance Code Design Epp Area Expansion mode Jpp Area Expansion mode (Closed Type) pp indicates initial frequency tolerance and load capacitance. Code Frequency/Capacitance B kHz No capacitance built-in yIndividual Specification Code Individual Specification *** Three-digit alphanumerics express "Individual Specification". eStructure/Size Code Structure/Size LA Two-Terminal Lead Type FB SMD Type rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (Hz). Capital letter "K" following three figures expresses the unit of "kHz". In case of 1.0MHz (1000kHz) or above, expressed by three figures and capital letter "M" for decimal point. 2 With standard products, "yIndividual Specification" is omitted, and "uPackage Specification Code" is carried up. uPackaging Code Packaging -B0 Bulk -R1 Plastic Taping o=330mm P16E15.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Resonators (CERALOCKr) 1 Chip Type Three Terminals CSTCC/R/E/G/V/W Series 3.00.2 0.450.3 Chip "CERALOCK" with built-in load capacitance in an extremely small package. MURATA's package technology expertise has enabled the development of the Chip "CERALOCK" with built-in load capacitors. High-density mounting can be realized because of the small package and the elimination of the need for an external load capacitor. 2.1 max. 7.20.2 0.50.05 0.30.3 6.6 max. 0.45 (Ref.) 0.45 (Ref.) t 0.45 (Ref.) (3) (2) (1) 1.20.2 1.40.2 1.20.2 t : 1.750.05 (2.00--2.99MHz) t : 1.550.05 (3.00MHz--) CSTCC_G(_A) 2.00-3.99MHz Features : EIAJ code 1.10.1 2.50.1 1. Oscillation circuits do not require external load capacitors. 2. The series is available in a wide frequency range. 3. The resonators are extremely small and have a low profile. 4. No adjustment is necessary for oscillation circuits. (in mm) 2.50.1 (3) 0.20.2 (2) 0.40.05 (1) 1.150.05 4.1 max. Applicatons 0.4 (ref.) 1. Clock oscillators for microprocessors 2. Electronic control circuits for small electronic equipment such as hand held video camera 3. Audio-visual applications (Camcorder, Remote Controller, etc.) 4. Office automation equipments (DVD, CD-ROM, HDD, FDD, etc.) 5. Automotive electronics (CSTCC_G_A series, CSTCR_G_B series, CSTCE_G_A series, CSTCE_V_A series, CSTCV_X_Q series) 6. Dual Tone Multi Frequency (DTMF) generator for cordless telephones 0.4 (ref.) 0.80.1 CSTCR_G(_B) 4.00-7.99MHz 0.4 (ref.) 0.80.1 1.4 max. 2.00.1 0.30.2 4.50.1 : EIAJ Monthly Code 0.80.1 0.40.1 0.40.1 0.750.1 1.50.1 1.50.1 0.40.1 (in mm) 1.1max. 1.30.15 0.100.10 3.20.15 0.40.1 0.10.1 0.50(ref.) 0.50(ref.) 0.700.10 3.0max. 0.50(ref.) (3) (2) (1) 0.40.1 0.40.1 0.40.1 CSTCE_G(_A) 8.00-12.50MHz (in mm) 0.40.1 1.20.1 1.20.1 3.20.15 0.40.1 0.10.1 1.85max. 0.62(ref.) 0.45(ref.) (3) (2) 0.850.1 0.90.1 0.62(ref.) 0.40.1 0.0750.075 3.0max. 1.1max. 1.30.15 0.100.10 1.1max. 0.100.10 1.30.15 2.00.15 0.52(ref.) (1) (3) 0.60.10.40.1 0.60.1 0.50.1 CSTCE_V(_A) 12.51-20.00MHz 0.650.1 0.950.1 0.950.1 (in mm) CSTCG_V 20.00-33.86MHz (Ultra small) 0.30.1 0.41(ref.) 0.52(ref.) (2) (1) 0.30.1 0.70.1 0.50.1 0.70.1 (in mm) Continued on the following page. 3 P16E15.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. 1.30.1 (0.7) (3) 3.10.2 M (0.9) (2) 2.5T0.2 * (0.7) (1) 0.05 +0.10 - 0.05 0.40.2 0.50.2 0.40.2 0.5 0.5 0.5 1.60.2 1.60.2 1.850.3 CSTCW_X 20.01-70.00MHz (in mm) (0.5) (2) (0.5) (1) 0.05 +0.10 - 0.05 Thickness varies with frequency and built-in capacitance. *: EIAJ code 1.0T0.2 1.0T0.2 (in mm) 1.25T0.2 Part Number Oscillating Frequency (MHz) Initial Tolerance (%) Temp. Stability (%) Temperature Range (C) Use CSTCC_G 2.00 to 3.99 0.5 0.3 [0.4%:Built-in Capacitance 47pF type within Freq.2.00 to 3.49MHz] -20 to +80 For consumer electronics CSTCC_G_A 2.00 to 3.99 0.5 CSTCR_G 4.00 to 7.99 0.5 0.2 -20 to +80 For consumer electronics CSTCR_G_B 4.00 to 7.99 0.5 0.15 -40 to +125 For automotive electronics CSTCE_G 8.00 to 12.50 0.5 0.2 -20 to +80 For consumer electronics CSTCE_G_A 8.00 to 12.50 0.5 0.2 -40 to +125 For automotive electronics CSTCE_V 12.51 to 20.00 0.5 0.3 -20 to +80 For consumer electronics CSTCE_V_A 12.51 to 20.00 0.5 0.3 -40 to +125 For automotive electronics CSTCG_V 20.00 to 33.86 0.5 0.3 -20 to +80 For consumer electronics CSTCV_X_Q 20.01 to 70.00 0.5 0.3 -40 to +125 For automotive electronics CSTCW_X 0.5 0.2 -20 to +80 For consumer electronics 20.01 to 70.00 0.4 For automotive -40 to +125 [-0.6% to +0.3%:Built-in Capacitance 47pF type within Freq.2.00 to 3.49MHz] electronics Irregular or stop oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use. Oscillation Frequency Measuring Circuit VDD To Frequency counter Rf Rd (1) (3) C1 C2 (2) 4 (0.5) (3) +0.3 +0.3 0.4 +0.3 - 0.2 0.4 - 0.2 0.4 - 0.2 0.5T0.2 0.5T0.2 0.5T0.2 Thickness varies with frequency and built-in c