GATE CONTROLLED DEVICE - Gate Turn Off Thyristors - Capsule Type VGK = 2V IT(AV) IT(RMS) TSINK = 55 C TSINK = 25 C ITSM(1) 10ms (A) (A) (kA) (kA) VGT @ tgt @ IGM = ITGQM IT tgq @ diGQ/dt IT = ITGQM VTM IT = ITGQM IGT @ 25 C 25 C (Typ) (kA s) (V) (A) (V) ( s) Note 5 2.5 1.0 0.8 0.4 10 10 20 ITSM(2) 2ms I t ton (min) toff (min) Rth j-hs Wt Mounting Force ( s) ( s) (K/W) (g) (kN) Note 7 Note 8 20.0 PDF Data Sheet Available VDRM New Part Number Notes 1&2 Note 2 Note 2 Note 3 Note 3 Note 4 Note 4 Note 4 WG5025Rx * S0500KC250 1200-2500 100-2000 18 500 1 330 640 4 7.2 80 x 10 90.0 0.065 120 45-90 WG6018Rx * S0600KC180 600-1800 100-1400 18 600 1.5 430 870 5 9 130 x 10 3 2.1 1.0 0.8 0.4 12 10 20 20.0 70.0 0.063 120 45-90 WG9014Rx * S0900KC140 600-1400 100-1100 18 900 3 445 890 5.5 9.8 150 x 10 3 2.3 1.0 0.8 0.4 15 12 20 20.0 75.0 0.063 120 45-90 WG5025FRx * H0500KC250 1200-2500 100-2000 18 500 1 280 540 3 5.4 45 x 10 3 3.2 1.5 0.8 0.8 30 5 40 10.0 60.0 0.065 120 45-90 WG6018FRx * H0600KC180 600-1800 100-1400 18 600 1.5 360 700 4 7.2 80 x 10 3 2.6 1.5 0.8 0.8 30 5 40 20.0 45.0 0.063 120 45-90 WG9014FRx * H0900KC140 600-1400 100-1100 18 900 3 370 730 4.5 8.1 100 x 10 3 3.0 1.5 0.8 0.8 40 6 40 10.0 50.0 0.063 120 45-90 WG10025SN Y G1000LC250 2500 1800 18 1000 2 500 970 5 8.9 125 x 10 3 2.5 1.0 1.0 2.0 20 16 25 2.0 16.0 0.080 170 10-12 101A288 WG10045SN Y G1000NC450 4500 1800 18 1000 2 380 750 8 14 80 x 103 4.0 1.0 1.2 2.0 20 16 25 2.0 16.0 0.080 480 15-25 Fig. 3 WG20025SN Y G2000LC250 2500 1800 18 2000 4 1020 2040 16 24 1.28 x 106 2.8 2.5 1.0 5.0 30 24 30 5.0 24.0 0.027 800 17-24 WG20045SN Y G2000NC450 4500 1800 18 2000 4 870 1730 13 22 0.85 x 106 3.5 2.5 1.0 8.0 30 25 30 8.0 25.0 0.027 800 17-24 WG30025SN Y G3000ZC250 2500 1800 18 3000 5 1640 3270 30 40 4.50 x 106 2.5 4.0 1.2 7.5 30 28 40 7.5 28.0 0.015 1500 36-44 WG30045SN Y G3000ZC450 4500 1800 18 3000 6 1180 2360 24 32 2.88 x 106 4.0 3.0 1.0 9.0 30 28 40 9.0 28.0 0.015 1300 36-44 WG30060SN Y G3000ZC600 6000 1800 18 3000 3 1100 2300 24 32 2.88 x 106 3.5 1.0 1.2 7.5 25 28 70 7.5 28.0 0.015 1500 36-44 WG40045SN Y G4000EC450 4500 1800 18 4000 6 1270 2540 25 32 3.1 x 106 4.4 4.0 1.2 7.5 50 28 40 7.5 28.0 0.015 1500 36-44 ton (min) toff (min) Rth j-hs Wt Mounting Force ( s) ( s) (K/W) (g) (kN) Note 7 Note 8 Old Part Number (V) VRRM VRGM (V) (V) ITGQM @ Cs (A) ( F) o o The information contained herein is confidential and is protected by Copyright. The information may not be used or disclosed except with the written permission of and in the manner permitted by the proprietors Westcode Semiconductors Limited. 2 2 3 o o ( s) (A) (A/ s) Note 6 Note 6 Outline No. 101A296 Fig. 4 Fig. 5 Fig. 6 In the interest of product improvement, Westcode reserves the right to change specifications at any time without prior notice. * These products, and their derivatives now undergoing obsolescence - please contact Factory for alternatives. Part Number OBSOLETE Data Sheet Available VDRM New Part Number (Not applicable) WG5045S N/A N/A WG8045S N/A N/A WG8060S N/A N/A WG7025S N/A N/A WG10025S N/A N/A WG40045S N/A N/A VGK = 2V VRRM VGK (V) (V) (V) Note 1 Note 1 Note 2 ITGQM @ Cs (A) ( F) IT(AV) IT(RMS) 1 2 VGK -2V. Not applicable to this table. 3 4 Double side cooled, single phase; 50Hz, 180o sinewave. 5 6 7 8 I2t VTM IT = ITGQM IGT @ (A) TSINK = 55 C TCASE = 25 C (A) (A) (kA) (kA) (A2s) (V) Note 3 Note 3 Note 4 Note 4 Note 4 Note 5 o The information contained herein is confidential and is protected by Copyright. The information may not be used or disclosed except with the written permission of and in the manner permitted by the proprietors Westcode Semiconductors Limited. Notes: ITSM(2) 2ms ITSM(1) 10ms o o 25 C VGT @ 25oC (Typ) (V) tgt @ IGM = ITGQM ( s) IT (A) Note 6 Not for new designs. Please refer to Factory for assistance. In the interest of product improvement, Westcode reserves the right to change specifications at any time without prior notice. Tj(initial) = 125oC, single phase, 180o sinewave, re-applied voltage VD = VR 10V. IT = 3000A repetitive, IGM = 30A, diGM/dt = 20A/s, for higher di/dt please consult Westcode Sales Office. With RCD snumber, R = 5 ohms and C is the value as for ITGQM Does not include snubber discharge time; refers only to minimum time for whole device to be in conduction with anode current di/dt > 10A/s Minimum time to re-fire the device. The gate drive circuit may require a longer period of low impedance option to ensure full extraction of the tail current tgq @ diGQ/dt IT = ITGQM ( s) (A/ s) Note 6 Outline No.