9334/DM9334 8-Bit Addressable Latch General Description The DM9334 is a high speed 8-bit Addressable Latch designed for general purpose storage applications in digital systems. It is a multifunctional device capable of storing single line data in eight addressable latches, and being a oneof-eight decoder and demultiplexer with active level high outputs. The device also incorporates an active level low common clear for resetting all latches, as well as an active level low enable. The DM9334 has four modes of operation which are shown in the mode selection table. In the addressable latch mode, data on the data line (D) is written into the addressed latch. The addressed latch will follow the data input with all nonaddressed latches remaining in their previous states. In the memory mode, all latches remain in their previous state and are unaffected by the data or address inputs. In the one-of-eight decoding or demultiplexing mode, the addressed output will follow the state of the D input with all other inputs in the low state. In the clear mode all outputs are low and unaffected by the address and data inputs. When operating the device as an addressable latch, changing more than one bit of the address could impose a transient wrong address. Therefore, this should only be done while in the memory mode. The function tables summarize the operation of the product. Features Y Y Y Y Y Y Y Common clear Easily expandable Random (addressable) data entry Serial to parallel capability 8 bits of storage/output of each bit available Active high demultiplexing/decoding capability Alternate Military/Aerospace device (9334) is available. Contact a National Semiconductor Sales Office/Distributor for specifications. Connection Diagram Dual-In-Line Package TL/F/6609 - 1 Order Number 9334DMQB, 9334FMQB, DM9334J or DM9334N See NS Package Number J16A, N16E or W16A C1995 National Semiconductor Corporation TL/F/6609 RRD-B30M105/Printed in U. S. A. 9334/DM9334 8-Bit Addressable Latch June 1989 Absolute Maximum Ratings (Note) Note: The ``Absolute Maximum Ratings'' are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the ``Electrical Characteristics'' table are not guaranteed at the absolute maximum ratings. The ``Recommended Operating Conditions'' table will define the conditions for actual device operation. If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Supply Voltage 7V Input Voltage 5.5V Operating Free Air Temperature Range b 55 C to a 125 C Military Commercial 0 to a 70 C Storage Temperature Range b 65 C to a 150 C Recommended Operating Conditions Symbol Military Parameter VCC Supply Voltage VIH High Level Input Voltage VIL Low Level Input Voltage IOH Commercial Units Min Nom Max Min Nom Max 4.5 5 5.5 4.75 5 5.25 2 2 V V 0.8 0.8 V High Level Output Current b 0.8 b 0.8 mA IOL Low Level Output Current 16 16 mA tW ENABLE Pulse Width (Fig. 1) (Note 4) tSU Setup Time (Note 4) tH TA Hold Time (Note 4) 19 13 19 13 Data 1 (Fig. 4) 20 13 20 13 Data 0 (Fig. 4) 20 14 20 14 Address (Fig. 6) (Note 1) 10 5 10 5 Data 1 (Fig. 4) 0 b 10 0 b 10 Data 0 (Fig. 4) 0 b 13 0 b 13 Free Air Operating Temperature b 55 125 ns ns ns 0 70 C Electrical Characteristics over recommended operating free air temperature range (unless otherwise noted) Symbol Parameter Conditions Min Typ (Note 2) Max Units b 1.5 V VI Input Clamp Voltage VCC e Min, II e b12 mA VOH High Level Output Voltage VCC e Min, IOH e Max VIL e Max, VIH e Min VOL Low Level Output Voltage VCC e Min, IOL e Max VIH e Min, VIL e Max II Input Current @ Max Input Voltage VCC e Max, VI e 5.5V IIH High Level Input Current VCC e Max VI e 2.4V E Input 60 Others 40 Low Level Input Current VCC e Max VI e 0.4V E Input b 2.4 Others b 1.6 Short Circuit Output Current VCC e Max (Note 3) Supply Current VCC e Max IIL IOS ICC 2.4 3.6 0.2 V 0.4 V 1 mA MIL b 30 b 100 COM b 30 b 100 56 86 mA mA mA mA Note 1: The ADDRESS setup time is the time before the negative ENABLE transition that the ADDRESS must be stable so that the correct latch is addressed without affecting the other latches. Note 2: All typicals are at VCC e 5V, TA e 25 C. Note 3: Not more than one output should be shorted at a time, and the duration should not exceed one second. Note 4: TA e 25 C and VCC e 5V. 2 Switching Characteristics at VCC e 5V and TA e 25 C (See Section 1 for Test Waveforms and Output Load) Symbol From (Input) To (Output) Parameter RL e 400X, CL e 15 pF Min Units Max tPLH Propagation Delay Time Low to High Level Output Enable to Output, Fig. 1 28 ns tPHL Propagation Delay Time High to Low Level Output Enable to Output, Fig. 1 27 ns tPLH Propagation Delay Time Low to High Level Output Data to Output, Fig. 2 35 ns tPHL Propagation Delay Time High to Low Level Output Data to Output, Fig. 2 28 ns tPLH Propagation Delay Time Low to High Level Output Address to Output, Fig. 3 35 ns tPHL Propagation Delay Time High to Low Level Output Address to Output, Fig. 3 35 ns tPHL Propagation Delay Time High to Low Level Output Clear to Output, Fig. 5 31 ns Function Tables E C Mode L H L H H L H L Addressable Latch Memory Active High Eight Channel Demultiplexer Clear Inputs Present Output States Mode C E D A0 A1 A2 Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 L H X X X X L L L L L L L L L L L L L L L L L H L H L L H H L L L L L L L L L H L L L L L H L L L L L L L L L L L L L L L L L L L L L L L L # # # # # # # # # # # # # # # L L H H H H L H H X X X X QN b 1 H H H H L L L L L H L H L L H H L L L L L L L L L H # # # # # # # # # H H L L L H QN b 1 QN b 1 # # # H H H H L L L Demultiplex L L L H Memory QN b 1 QN b 1 L H QNb1 QNb1 QN b 1 QN b 1 QN b 1 Addressable Latch # # # H H Clear QN b 1 QN b 1 QNb1 QNb1 X e Don't Care Condition L e Low Voltage Level H e High Voltage Level QNb1 e Previous Output State 3 L H Logic Diagram 9334 TL/F/6609 - 2 Switching Time Waveforms TL/F/6609 - 4 Other Conditions: E e L, C e H, A e Stable Figure 2 TL/F/6609 - 3 Other Conditions: C e H, A e Stable Figure 1 TL/F/6609 - 6 TL/F/6609 - 5 Other Conditions: C e H, A e Stable Other Conditions: E e L, C e L, D e H Figure 4 Figure 3 TL/F/6609 - 8 TL/F/6609 - 7 Other Conditions: C e H Other Conditons: E e H Figure 6 Figure 5 Note: The shaded areas indicate when the inputs are permitted to change for predictable output performance. 4 Physical Dimensions inches (millimeters) 16-Lead Ceramic Dual-In-Line Package (J) Order Number 9334DMQB or DM9334J NS Package Number J16A 16-Lead Molded Dual-In-Line Package (N) Order Number DM9334N NS Package Number N16E 5 9334/DM9334 8-Bit Addressable Latch Physical Dimensions inches (millimeters) (Continued) 16-Lead Ceramic Flat Package (W) Order Number 9334FMQB NS Package Number W16A LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation 1111 West Bardin Road Arlington, TX 76017 Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Europe Fax: (a49) 0-180-530 85 86 Email: cnjwge @ tevm2.nsc.com Deutsch Tel: (a49) 0-180-530 85 85 English Tel: (a49) 0-180-532 78 32 Fran3ais Tel: (a49) 0-180-532 93 58 Italiano Tel: (a49) 0-180-534 16 80 National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-043-299-2309 Fax: 81-043-299-2408 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.