NF4EB-4M-6V - Panasonic / NAiS

198

NF-RELAYS

FLATPACK RELAY

CSA

pending

mm inch

10.8

.425

20.0

.787

30.2

1.189

FEATURES

1. Flatpack

2. Long seller

SPECIFICATIONS

Contacts

1]. MBB types available: 2MBB & 4MBB

(See next page for contact positions.)

Coil

Remarks

* Speciﬁcations will vary with foreign standards certiﬁcation ratings.

*1Measurement at same location as "Initial breakdown voltage" section

*2Detection current: 10 mA

*3Excluding contact bounce time

Half-wave pulse of sine wave: 11ms; detection time: 10µs

*5Half-wave pulse of sine wave: 6ms

Detection time: 10µs

*7Refer to 5. Conditions for operation, transport and storage mentioned in

AMBIENT ENVIRONMENT (Page 61).

Characteristics (at 25°C 77°F, 50% R.H. seal level)

Arrangement1] 2 Form C, 4 Form C

Initial contact resistance

(By voltage drop 6 V DC 1 A) Max. 50 mOhm

Typical 25 mOhm

Contact material Movable contact Gold-clad silver

Stationary contact Gold-clad silver

Rating,

(resistive load)

Max. switching power 60 W 100 VA

Max. switching voltage 220 V AC, DC

Max. switching current 2 A

Expected life

(min. operations)

Mechanical 108

Electrical

(Resistive)

2 A 30 V DC 2 x 105

1 A 30 V DC 106

0.5 A 30 V DC 107

Nominal operating power, at 25∞C2C Approx. 300 mW

4C Approx. 480 mW

Max. operating power for continuous duty Approx. 1 W

at 40°C 104°F

Max. operating speed 50 cps

Initial insulation resistance*

1,000 MOhm at 500 V DC

Electrostatic

capacitance

Contact/Contact Approx. 4 pF

Contact/Coil Approx. 7 pF

Contact/Ground Approx. 6 pF

Initial

breakdown

voltage*

Between open contacts 750 Vrms

Between contact sets 1,000 Vrms

Between live parts and ground 1,000 Vrms

Between contacts and coil 1,000 Vrms

Operate time*

(at nominal voltage) Max. 15 ms (Approx. 10 ms)

Release time (without diode)*

(at nominal voltage) Max. 10 ms (Approx. 3 ms)

Contact bounce Approx. 1.5 ms

Shock

resistance Functional*

In de-energized

condition

Min. 29.4 m/s

{3 G}

(In contact direction)

Min. 98 m/s

{10 G}

(perpendicular to contact)

In energized

condition Min. 196 m/s

{20 G}

Destructive*

Min. 980 m/s

{100 G}

Vibration

resistance

Functional*

In de-energized

condition

29.4 m/s

{3 G}, 10 to 55 Hz

at double amplitude of 0.5 mm

(in contact direction)

98 m/s

{10 G}10 to 55 Hz

at double amplitude of 1.6 mm

(perpendicular to contact)

In energized

condition 117.6 m/s

{12 G}10 to 55 Hz

at double amplitude of 2 mm

Destructive 196 m/s

{20 G}, 10 to 55 Hz

at double amplitude of 3.3 mm

Conditions for operation,

transport and storage*

(Not freezing and condens-

ing at low temperature)

Ambient temp.

–40°C to + 65°C

–40°F to +149°F

Humidity 5 to 85%R.H.

Unit weight 2C Approx. 14 g .49 oz

4C Approx. 15.5 g .55 oz

TYPICAL APPLICATIONS

NF relays are widely acceptable in appli-

cations where small size and high sensi-

tivity are required.

Such applications include: Electronic

equipment, Household applications,

Alarm systems, Ofﬁce machines, Com-

munication equipment, Measuring equip-

ment, Remote control systems, General

control circuits, Machine tools, Industrial

machinery, etc.

199

ORDERING INFORMATION

Ex. NF

Contact arrangement Type classification MBB function Contact metarialCoil voltage (DC)

2: 2 Form C

4: 4 Form C EB: Standard Nil: Form C type

2M: 2MBB (2 Form D)

4M: 4MBB (4 Form D)

5, 6, 12,

24, 48 V Nil: Gold-clad silver

1: Gold-cap over silver palladium

4 EB 4M 48V 1

(Notes) 1. For VDE recognized types, add suffix VDE.

(Notes) 2. For UL/CSA recognized type, add suffix-A, as NF2EB-12V-A whose ground terminal is cut off.

(Notes) 3. Standard packing Carton: 20 pcs.; Case: 200 pcs.

*Less than 1,000 W:

*More than 1,000 W:±10%

±15%

Part No. Nominal voltage ,

V DC Pick-up voltage,

V DC (max.) Drop-out

voltage,

V DC (min.)

Max. allowable

voltage,

V DC (at 40°C) Coil resistance,*

Ohm Nominal

operating pow er ,

Inductance, H

Armarure

Open Close

NF2EB-5V 5 4.0 0.5 8.7 90 278 0.071 0.071

NF2EB-6V 6 4.8 0.6 10.5 137 260 0.093 0.094

NF2EB-12V 12 9.6 1.2 21 500 290 0.338 0.344

NF2EB-24V 24 19.2 2.4 42 2,000 290 1.29 1.31

NF2EB-48V 48 38.4 4.8 84 7,000 330 4.12 4.18

NF4EB-5V 5 4.0 0.5 7 53 472 0.029 0.029

NF4EB-6V 6 4.8 0.6 8.5 90 400 0.070 0.071

NF4EB-12V 12 9.6 1.2 17.0 330 440 0.22 0.23

NF4EB-24V 24 19.2 2.4 34 1,200 480 0.77 0.79

NF4EB-48V 48 38.4 4.8 68 4,200 550 2.22 2.25

DIMENSIONS

2 Form C

10.8±0.3

.425±.012

0.3

.012

3.3

.130

Resin rise

max. 0.5

max. .020

4-0.8 dia.

.031 dia.

Stand-off

20.6

.811

30.2

1.189

.787

.512

N.O.

Ground terminal

N.C. Coil terminal

Common terminal Terminal dimensions (except soldering)

Width: 0.8 .031

Thickness: 0.3 .012

MBB contact position

NF2-2M: terminal 6-7-8, 3-4-5

Schematic PC board pattern (Copper-side view)

(2.54)

(.100)

7.6±0.2

.3±.008

7.6±0.2

.3±.008

12.7±0.2

.5±.008

(2.54)

(.100)

4.9

.193

5.1±0.2

.2±.008

4.9

.193

1.13

.044 1.13

.044

1.3

.051 DIA.

–0.3 +0

–.012

Relay

outline

mm inch

4 Form C

General tolerance: ±0.5 ±.020

(Except for the cover height)

811

710

10.8±0.3

.425±.012

0.3

.012

3.3

.130

Resin rise

max. 0.5

max. .020

4-0.8 dia.

.031 dia.

Stand-off

20.6

.811

30.2

1.189

24.6

.969

13.6

.535

N.O.

Ground terminal

N.C. Coil terminal

Common terminal Terminal dimensions (except soldering)

Width: 0.8 .031

Thickness: 0.3 .012

Schematic

MBB contact position

NF4-2M: terminals 6-7-8, 9-10-11

NF4-2M: terminals 6-7-8, 3-4-5, 12-13-14, 9-10-11

PC board pattern (Copper-side view)

(2.54)

(.100)

7.6±0.2

.3±.008

7.6±0.2

.3±.008

12.7±0.2

.5±.008

(2.54)

(.100)

2.1

.083

5.1±0.2

.2±.008

2.1

.083

1.13

.044 1.13

.044

1.3

.051 DIA.

Relay

outline

–0.3 +0

–.012

TYPES AND COIL DATA (at 25°C 77°F)

200

REFERENCE DATA

1. Life curve 2. Coil temperature rise (resistance method) 3. H2S gas test

0.5 1 1.5 2 2.5

100

1,000

30 V DC Resistive

Load current, A

No. of operations, ×104

0.2 0.4 0.6 0.8 1.0 1.2 1.4

Coil temperature rise, °C

Operating power, W Exposure time, hrs

50mΩ

100mΩ

500mΩ

1Ω

5Ω

10Ω

50Ω

100Ω

Contact resistance

20 50100200 1,000

2,000500

Gas density:

2 to 5 ppm

Temperature: 40°C

Humidity: 90%

Sealed NFEB relay

4. Contact reliability

Test conditions:

1. Contact current/voltage: 10 µA 100 mV 1 kHz

2. Cycle rate 20 cps.

3. Miscontact detection level: 1 mW (= 100 Ohm)

4. Detection method: Observation of all changeover

contacts

Test result:

m = 1.5

m = 21.2 x 106

95% conﬁdence level = 3.1 x 106

17 contacts out of 20 achieved 10 million no miscon-

tact operations.

0.1 0.5 1.0 5.0 10.0 50 100

0.1

0.2

0.150.3

0.40.5

1.0

1.52.0

3.0

4.05.0

10.0

20.0

25.030.0

40.050.0

60.070.0

80.090.0

95.099.0

99.9

15.0

No. of operations, ×106

F(t)(%)

5. High temperature test

Test conditions:

Ambient temperature: 80°C ±2°C

Test method:

1. All contacts were switched for 100 operations on 2

A 30 V DC resistive load.

2. Samples then were exposed to 80°C temperature

for 5,000 hours, continuous

3. Contact resistance was measured with Hewlett-

Packard testing equipment.

Test result:

Amber relays sho wed a stable spread of contact resis-

tance within the initially speciﬁed 50 mW after 5,000

hours exposure.

100 200 300 400 500 1,000 5,000

3,000

Contact resistance, mΩ

Exposure, hrs.

N.C. contacts

N.O. contacts

Min.

Max.

Min.

Max.

NOTES

1. Prevention of vibration and shock

To reduce the likelihood of vibration and

shock, we recommend that you install so

that the contact action is not in the direc-

tion of gravity.

Top

Common terminal

Coil terminal

NC terminal

NO terminal Bottom

 2001 Matsushita Electric Works Group Europe

For Cautions for Use, see Relay Technical Information.