Datasheet Rev. IJ1
Issued 2009/10
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para -
me ters, test conditions and
processing information only
to be used together with the
'Definitions' section in the
cat -
alogue or at schrackrelays.com
in the ‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays SCHRACK
1
Power Relay RF
n1 pole 16 A, 1 NO or 1 NC contact
nSwitching capacity 4000 VA
nCoil power 400 mW
nReinforced insulation (EN 61810, 60335, 60730)
nAmbient temperature up to 105°C
nQuick connect terminals for load side
nWG version: Materials in accordance to IEC 60335-1
Applications
Oven control, electric heating, power supplies, air conditioning,
microwares, hobs
F0273-BI
Approvals
VREG.-Nr. A652, ZE214025
Technical data of approved types on request
Contact data
Contact configuration 1NO or 1NC
Contact set single contact
Type of interruption micro disconnection
Rated voltage / max. switching voltage AC 250 / 400 VAC
Rated current 16 A
Maximum breaking capacity AC 4000 VA
Limiting making capacity, max 4 s, duty factor 10% 25 A
Contact material AgNi90/10
Minimum contact load 12VAC / 500mA
Rated frequency of operation with / without load 6 / 1200 min-1
Operate- / release time max. 11 / 7 ms
Bounce time NO / NC contact max. 4 / 4 ms
Contact ratings
Type Contact Load Ambient Cycles
temp. [°C]
IEC 61810
RF334; RFH34 NO 16 A, 250 VAC, cosϕ=1 85°C 100x103
RF334; RFH34 NO 11 A, 250 VAC, cosϕ=1 85°C 250x103
RF334; RFH34 NO 20 A, 250 VAC, cosϕ=1 85°C 25x103
RF334; RFH34 NO 25 A, 250 VAC, cosϕ=1 70°C 15x103
RF354; RFH54 NC 16 A, 250 VAC, cosϕ=1 85°C 100x103
RF354; RFH54 NC 20 A, 250 VAC, cosϕ=1 85°C 50x103
RF354; RFH54 NC 25 A, 250 VAC, cosϕ=1 70°C 20x103
RFH34 NO 16 A, 250 VAC, cosϕ=1 105°C 100x103
RFH34 NO 11 A, 250 VAC, cosϕ=1 105°C 250x103
RFH34 NO 18.5 A, 250 VAC, cosϕ=1 105°C 20x103
RFH34 NO 10 A, 400 VAC, cosϕ=1 105°C 150x103
Coil data
Rated coil voltage DC coil 5...60 VDC
Operative range to IEC 61810 2
Coil insulation system according UL1446 Class F