AC-AC UL/cUL ADAPTOR AC 24V 60mA TAAAUZA A. Electrical specifications 1. Input voltage: AC 120V 410% 60Hz +0.5Hz REV. Status} 2. Output voltage and current: AC 24V at 6O0mA REVISION Vin 100% Load No Load 10/25/01 RJ 108 20.0VAC MIN = REVISION A 120 23.524.5VAC 30.0VAC MAX CHANGED 132 - 34.0VAC MAX A2 & A6 NOTE: Specification applies after 10 minutes warmup with full load 05/06/02 RJ and at any operating temperature. Re SeD SLOG 3. Operating temperature: 10 C to +40C LOCATION. ADDED 4. Storage temperature: 20 C to +85 C RoHS 5. Operating and Storage Humidity: 0 to 95% 05/17/06 MP without condensation 6. Withstand voltage: 1000Vrms 1 minute REVISION C @ input to output WITHSTAND B. Typical performance data test Condition: VOLTAGE WAS Ta= +25C measured after 10 minute 1500Vrms 08/01/06 MP PREPARED BY: warmup with input at 120V 60Hz TYPICAL PERFORMANCE CHART . Safety agencies UL and cUL File No, E218172 35 30 . Nameplate: Metallic Information is as follows: letters on a black background 25 20 Ac ADAPTOR wew-TamuraGroup.com CLASS 2 POWER SUPPLY 212AS24006 INPUT AC120V 6OHz SW OUTPUT AC 24V 6OmA Output Voltage (V) 20 30 40 OUTPUT CURRENT(mA) c US LISTED 218172 9K MADE IN CHINA [ 50 60 108V60Hz @- 120V60Hz Se | E. Mechanical Specifications All dimensions shown are nominal unless otherwise specified = 35.50+1.0[1.398+0.039] x) 0 1 Caution label ~ molded in. 63.50+1.0[2.5040.039] Nameplate / 1830[6 FT]MIN fo 40.00+1.0[1.575+0.039] AWG 24 X 2 tt 5.50[0.217] Female plug, |.D. 2.10[0.083] nickel plated 12.50[0.492] ~ Molded K. BRENNAN ENGINEER: IDWG CONTROL NO.]REV UL/cUL AC 24V 60mA M. PITCHAI ACAD pATibassrewg | C POWER SUPPLY 212AS24006 QUALITY CONTROL: CONTENTS OF THIS DRAWING ARE| TAMURA CORPORATION OF AMERICA| MODEL SPECIFICATION T. CLEM PRIOR NOTICE yo WITHOUT) 43352 Bae TS ORT RTE eS TCOIaD. Coe | DIM: mm(In} SCL: NONE | si: 1 OF 1 APPROVED: PROPRIETARY Nomice: : TMS DRAWING PRINT OR DOCUMENT AND SUBLECT | MATTER DISCLOSED HERENN ARE PROPRIETARY TEMS To WHICH TAMURA Y. SEKIGUCHI IVE RIGHT OF DISSEMINATION, REPRODUCTION, OR DOCUMENT IS SUBMITTED IN CONFIDENCE FOR CONSIDERATION BY THE RECIPIENT ALONE UNLESS. PERMISSION OR FURTHER DISCLOSURE iS EXPRESSLY GRANTED IN WRITING.