HRF-AT4510
________________________________________________________________________________________________________
Web Site: www.mysoiservices.com Honeywell
Email: mysoiservices@honeywell.com Solid State Electronics Center
15.5 dB, DC-4GHz, 5 Bit
Parallel Digital Attenuator
Features
x Very Low DC Power Consumption
x Attenuation In Steps From 0.5 dB To 15.5 dB
x Single Or Dual Power Supply Voltages
x Parallel Data Interface
x 50 Ohm Compatible Impedance
x Space Saving VQFN Surface Mount Packaging
Product Description
The Honeywell HRF-AT4510 is a 5-bit digital
attenuator that is ideal for use in broadband
communication system applications that require
accuracy, speed and low power consumption. The
HRF-AT4510 is manufactured with Honeywell's
patented Silicon On Insulator (SOI) CMOS
manufacturing technology, which provides the
performance of GaAs with the economy and
integration capabilities of conventional CMOS.
HRF-AT4510 in VQFN Package
RF Electrical Specifications @ + 25oC
Results @ Vdd = 5.0 +/- 10%, Vss = 0 unless otherwise stated, Z0 = 50 Ohms
Contact Honeywell for relative performance at other supply configurations
Parameter Test Condition Frequency Minimum Typical Maximum Units
Insertion Loss DC – 0.5 GHz
2.0 GHz
3.0 GHz
4.0 GHz
1.60
2.00
2.40
4.40
2.20
2.40
2.90
5.00
dB
dB
dB
dB
1dB Compression VSS = 0V, Input Power 1.0 GHz
2.0 GHz
22.5
21.0
dBm
dBm
1dB Compression VSS = - 3, Input Power 1.0 GHz
2.0 GHz
28.5
27.0
dBm
dBm
Input IP3 VSS = 0V Two-tone inputs
Up To +5 dBm @ 0 dB
Attenuation
2.0 GHz 36.0 dBm
Input IP3 Vss = - 3
Two-tone inputs Up To + 5
dBm @ 0 dB Attenuation
2.0 GHz >36.0 dBm
Return Loss* Any Bit or Combination of
Bits
DC - 4.0 GHz -11 -15 dB
Attenuation Accuracy All attenuation states
All attenuation states
All attenuation states
All attenuation states
DC - 1.0 GHz
2.0 GHz
3.0 GHz
4.0 GHz
+/-(0.17 + 3% of programmed IL)
+/-(0.22 + 3% of programmed IL)
+/-(0.33 + 3% of programmed IL)
+/-(0.45 + 3% of programmed IL)
dB
dB
dB
dB
Trise, Tfall*
Ton, Toff (Tpd)
Transients
10% To 90%
50% Cntl To 90%/10%RF
In-Band
10
15
30
nS
nS
mV
0.01uF Decoupling Capacitors Required On Power Supply Rails.
*
By design
12001 State Highway 55
2004 4510W Published August 2004 Page 1 Plymouth, Minnesota 55441-4799
1-800-323-8295
HRF-AT4510
________________________________________________________________________________________________________
Web Site: www.mysoiservices.com Honeywell
Email: mysoiservices@honeywell.com Solid State Electronics Center
Functional Schematic
RF In RF Out
S4 S3 S0S1S2
8dB 4dB 2dB 1dB .5dB
ESD, Buffer, Level Shift
DC Electrical Specifications @ + 25oC
Parameter Minimum Typical Maximum Units
VDD 3.315.0 5.5 V
VSS -5.0 V
IDD Power Supply Current 35 uA
CMOS Logic level (0) 0 0.8 V
CMOS Logic level (1) VDD – 0.8 VDD V
Input Leakage Current 10 uA
Note 1, performance curves are for VDD= +5.0 +/- 10%
Absolute Maximum Ratings2
.
Parameter Absolute Maximum Units
Input Power + 35 dBm
VDD +6.0 V
VSS -5.5 V
ESD Voltage 400 V
Operating Temperature -40 To +85 Degrees C
Storage Temperature -65 To +125 Degrees C
Digital Inputs VDD+0.6 max to -0.6 min V
(Note 2) Operation of this Device beyond any of these parameters may cause permanent damage.
Latch-Up: Unlike conventional CMOS digital attenuators, Honeywell's HRF-AT4510 is immune to latch-up.
ESD Protection: Although the HRF-AT4510 contains ESD protection circuitry on all digital inputs, conventional precautions should
be taken to ensure that the Absolute Maximum Ratings are not exceeded.
12001 State Highway 55
2004 4510W Published August 2004 Page 2 Plymouth, Minnesota 55441-4799
1-800-323-8295
HRF-AT4510
________________________________________________________________________________________________________
Web Site: www.mysoiservices.com Honeywell
Email: mysoiservices@honeywell.com Solid State Electronics Center
Package Outline Drawing
This package conforms to the LPCC
TM
4 x 4 mm 24 lead body dimensions.
See ASAT LPCC Marketing Outline Dwg. # DGMJ00004 Latest Rev. at
http://www.asat.com for additional dimensional information.
See Application Note 310, VQFN Surface Mount Application, on our web site at
http://www.mysoiservices.com/ for assembly recommendations.
Pin Configuration
Pin Function Pin Function
1 VDD 13 GROUND
2 GROUND 14 GROUND
3 GROUND 15 RF OUTPUT
4 RF INPUT 16 GROUND
5GROUND17 VSS
6 GROUND 18 GROUND
7GROUND19 S0
8GROUND20 S1
9GROUND21 S2
10 GROUND 22 S3
11 GROUND 23 S4
12 GROUND 24 OPEN
Note: Bottom ground plate must be grounded for proper RF performance.
Truth Table
S4 S3 S2 S1 S0 Output
0
0
0
0
0
1
1
0
0
0
0
1
0
1
0
0
0
1
0
0
1
0
0
1
0
0
0
1
0
1
0
0
0
0
1
Reference Input
0.5 dB
1 dB
2 dB
4 dB
8 dB
15.5 dB
Operation: Data on parallel input “S” pins are independently buffered and presented to the RF attenuator circuits.
"0" = CMOS Low, "1" = CMOS High.
12001 State Highway 55
2004 4510W Published August 2004 Page 3 Plymouth, Minnesota 55441-4799
1-800-323-8295
HRF-AT4510
________________________________________________________________________________________________________
Web Site: www.mysoiservices.com Honeywell
Email: mysoiservices@honeywell.com Solid State Electronics Center
Evaluation Circuit Board
HRF-AT4510 Evaluation Board
Honeywell's evaluation board provides an
easy to use method of evaluating the RF
performance of our attenuator. Simply
connect power, DC and RF signals to be
measuring attenuator performance in less
than 10 minutes.
Evaluation Circuit Board Layout Design Details
Item Description
PCB Impedance Matched Multi-Layer FR4
Attenuator HRF-AT4510 Digital Attenuator
Chip Capacitor Panasonic Model ECU-E1C103KBQ Capacitor, .01uf 0402 10% 16V
RF Connector Johnson Connectors Model 142-0701-801 SMA RF Coaxial Connector
DC Pin Mil-Max Model 800-10-064-10-001 Header Pins
Evaluation Circuit Board Connections
HRF-AT4510
Evaluation Board
Top View
HRF-AT4510
Honeywell
VDD VSS
Gnd
RF In RF Out
S0S1S2S3S4
Open Gnd
12001 State Highway 55
2004 4510W Published August 2004 Page 4 Plymouth, Minnesota 55441-4799
1-800-323-8295
HRF-AT4510
________________________________________________________________________________________________________
Web Site: www.mysoiservices.com Honeywell
Email: mysoiservices@honeywell.com Solid State Electronics Center
Performance Curves
Insertion Loss
AT4510 Insertion Loss By Attenuation State Vs Frequency
-20
-18
-16
-14
-12
-10
-8
-6
-4
-2
0
00.511.522.533.54
Frequency (GHz)
Insertion Loss (dB)
S12(00000
)
S12(00001
)
S12(00010
)
S12(00011
)
S12(00100
)
S12(00101
)
S12(00110
)
S12(00111
)
S12(01000
)
S12(01001
)
S12(01010
)
S12(01011
)
S12(01100
)
S12(01101
)
S12(01110
)
S12(01111
)
S12(10000
)
S12(10001
)
S12(10010
)
S12(10011
)
S12(10100
)
S12(10101
)
S12(10110
)
S12(10111
)
S12(11000
)
S12(11001
)
S12(11010
)
S12(11011
)
S12(11100
)
S12(11101
)
S12(11110
)
S12(11111)
Return Loss
AT4510 Return Loss By Attenuation State Vs Frequency
-60
-50
-40
-30
-20
-10
0
00.511.522.533.54
Frequency (GHz)
S11 Return Loss (dB)
S11(00000)
S11(00001)
S11(00010)
S11(00011)
S11(00100)
S11(00101)
S11(00110)
S11(00111)
S11(01000)
S11(01001)
S11(01010)
S11(01011)
S11(01100)
S11(01101)
S11(01110)
S11(01111)
S11(10000)
S11(10001)
S11(10010)
S11(10011)
S11(10100)
S11(10101)
S11(10110)
S11(10111)
S11(11000)
S11(11001)
S11(11010)
S11(11011)
S11(11100)
S11(11101)
12001 State Highway 55
2004 4510W Published August 2004 Page 5 Plymouth, Minnesota 55441-4799
1-800-323-8295
HRF-AT4510
________________________________________________________________________________________________________
Web Site: www.mysoiservices.com Honeywell
Email: mysoiservices@honeywell.com Solid State Electronics Center
Step Accuracy
AT4510 Step Accuracy Vs Attenuation
-1.5
-1.3
-1.1
-0.9
-0.7
-0.5
-0.3
-0.1
0.1
0.3
0.5
0246810121416
Programmed Attenuation (dB)
Step To Step Delta (dB)
StepAcc@0.01GHz
StepAcc@0.1GHz
StepAcc@0.5GHz
StepAcc@1GHz
StepAcc@2GHz
StepAcc@3GHz
StepAcc@4GHz
AT4510 Return Loss By Attenuation State Vs Frequency
-60
-50
-40
-30
-20
-10
0
00.511.522.533.54
Frequency (GHz)
S22 Return Loss (dB)
S22(00000)
S22(00001)
S22(00010)
S22(00011)
S22(00100)
S22(00101)
S22(00110)
S22(00111)
S22(01000)
S22(01001)
S22(01010)
S22(01011)
S22(01100)
S22(01101)
S22(01110)
S22(01111)
S22(10000)
S22(10001)
S22(10010)
S22(10011)
S22(10100)
S22(10101)
S22(10110)
S22(10111)
S22(11000)
S22(11001)
S22(11010)
S22(11011)
S22(11100)
S22(11101)
S22(11110)
S22(11111)
12001 State Highway 55
2004 4510W Published August 2004 Page 6 Plymouth, Minnesota 55441-4799
1-800-323-8295
HRF-AT4510
________________________________________________________________________________________________________
Web Site: www.mysoiservices.com Honeywell
Email: mysoiservices@honeywell.com Solid State Electronics Center
Relative Accuracy
AT4510 Relative Accuracy Vs Attenuation
-1.5
-1
-0.5
0
0.5
1
1.5
0246810121416
Programmed Attenuation (dB)
Relative Accuracy (dB)
RelAcc@0.01GHz
RelAcc@0.1GHz
RelAcc@0.5GHz
RelAcc@1GHz
RelAcc@2GHz
RelAcc@3GHz
RelAccMax
RelAccMin
Ordering Information
Ordering Number Delivery Method Units Per Shipment
HRF-AT4510-TR
HRF-AT4510-E
On Tape And Reel3
On Individual Engineering Evaluation Board
3000 Units Per Reel
One Board Per Box
(Note 3) Call Honeywell for details
Honeywell reserves the right to make changes to improve reliability, function or design. Honeywell does not assume
any liability arising out of the application or use of any product or circuit described herein; neither does it convey any
license under its patent rights nor the rights of others.
12001 State Highway 55
2004 4510W Published August 2004 Page 7 Plymouth, Minnesota 55441-4799
1-800-323-8295