REV. Status ISSUE 1 4/28/92 YN ISSUE 2 REFORMATTED TEMECULA WAS CARSON 9/13/95 DS PREPARED BY: K. Georgeson Vin 108 120 132 3. Safety agencies UL File No. 82180 CSA File No. LR38236 1. Electrical specifications 1.1 Input voltage: AC 120V 410% 60 Hz +0.5 Hz 1.2 Output voltage and current: AC 20V at 1000mA 2. Typical performance data test condition: Ta = +25 C, measured after 10 minute warmup with input at 120V 6O0Hz 4. Nameplate: See drawing PN111159 for detail 5. Mechanical Specifications; All dimensions shown are nominal unless otherwise specified 50(1.97) MAX = 1000mA_Load 100mA Load 16.6 VAC MIN - 18.720.9 VAC 23.3 VAC MAX - 25.8 VAC MAX 1.3 Operating temperature: 0 C to +40 C 1.4 Storage temperature: 1.5 Operating and Storage Humidity: 0 to 95% without condensation 1.6 1.7 -20 C to +85 C Withstand voltage: AC 1500Vrms 1 minute @ input to output Input earth prong is connected to output G terminal NOTE: Specification applies after 10 minutes warmup with 1000mA load and at any operating temperature UL AND CSA RATING > ij 2 Ped deedecde fected. Hs Sev << Trt fe tee Peete Pees fesPeete Pesta 5 a o : : : Pore fe dee dedendes deapeedeapedens > / 108V KE A > seslecs[eccdecs[ecslecsleccdec[ecstees[ecedecs[ecstecsecedees[ecsteesleredesPectens a - = L : 2 glib Ep ep oe ee fe 0 400 800 1200 1600 OUTPUT CURRENT (mA) | of - 75(2.95)MAX f a Oo 4 gels OPEN av) G Caution Label 4 Molded in ~ 63(2.48) MAX ~ ENGINEER: DWG CONTROL NO.| REV UL/CSA AC 20V 1000mA D. Suzuki ACAD PRAT ETON A POWER SUPPLY 8 3 OA O 0 6 5 _ 0 5 QUALITY CONTROL: V. Casey PRIOR NOTICE CONTENTS OF THIS DRAWING ARE SUBJECT TO CHANGE WITHOUT CORPORATION OF AMERICA MODEL SPECIFICATION 433552 BUSINESS PARK DRIVE, TEMECULA, CA. 92590-6624 909) 699-1270 FAX 9096769482 DIM: mm(In} SCL: NONE | SH: 1 OF 1 APPROVED: V. Casey PROPRIETARY NOTICE: THIS DRAWING PRINT OR DOCUMENT AND SUBJECT MATTER DISCLOSED HEREIN ARE PROPRIETARY ITEMS TO WHICH TAMURA RETAINS THE EXCLUSIVE RIGHT OF DISSEMINATION, REPRODUCTION, MANUFACTURE AND SALE. THIS CONFIDENCE FOR CONSIDERATION BY THE RECIPIENT ALONE UNLESS PERMISSION FOR FURTHER DISCLOSURE IS EXPRESSLY GRANTED IN WRITING. DRAWING, PRINT OR DOCUMENT IS SUBMITTED IN