| 1000pF; 2KV @@ /@|@|@ 1 ELECTRICAL SPECIFICATIONS: NOTES 1.0 TURNS RATIO: (P6P5P4) : (J6JS > 1CT : 1CT 3% WINNER TTON ARE EMESTED P3-P2P1) : (WJ2-u1 > 1CT : 1CT + 3% ' 2.0 INDUCTANCE: PSB : J350uH MIN. @ 0.1V, 100KHz, 8mA DC Bias P3-P1 : 3550uH MIN. @ 0.1V, 100KHz, 8mA DC Bias 3.0 LEAKAGE INDUCTANCE: P6P4 (WITH J6 AND J3 SHORT : O.3 MAX. @ 1MHz P3P1 (WITH J2 AND J1 SHORT : 0.3 MAX. @ 1MHz 4.0 INTERWINDING CAPACITANCE: (P6,P5,P4) TO (J6,J3 : JOpf MAX @ 1MHz P3,P2,P1) TO (J2,J1 : 3Opf MAX. @ 1MHZ 5.0 DC RESISTANCE: (J6J3)=(J2J1) : 1.2 ohms Max. Bel Stewart Connector 11118 Susquehanna Trail, South Glen Rock, Pa 17327-9199 717.234.7512 hitp://www.stewartconnector.com THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND PROPERTY OF BEL STEWART ONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONTENT SHEET OF 4 DRAWING NO. S|I40006 REV. 17 OF BEL STEWART CONNECTOR. THE SUBJECT MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING.6.0 7.0 8.0 9.0 RETURN LOSS: 1MHz TO 3OMHz 60MHz TO 80MHz NOTE: 100 OHMS CONNECTED TO (J2J1) OR (J6J3). DIELECTRIC WITHSTAND: (J1, J2) TO (P1, P3) J3, J6) TO (P4,P6) INSERTION LOSS: RS=RL=100 ohms 100KHz TO 100MHz RISE TIME: RS=100 OHMS AND RL = 100 OHMS OUTPUT VOLTAGE = 1 V peak PULSE WIDTH= 112nS 10.0 CROSS TALK: 1MHz TO 100MHz 11.0 COMMON TO COMMON MODE ATTENUATION: 3OMHz TO 100MHz RECEIVE 18dB MIN. 12dB MIN. 1500 VAC 1500 VAC 1.1 dB TYP 35.0 nS MAX 3.0 nS MAX 40 dB TYP 35dB TYP OF BEL STEWART CONNECTOR. THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND PROPERTY OF BEL STEWART ONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONTENT THE SUBJECT MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. Bel Stewart Connector MagJad 11118 Susquehanna Trail, South Glen Rock, Pa 17327-9199 717.234.7512 hitp://www.stewartconnector.com eT OF 4 DRAWING NO. SI40006 47L .635 [16.13] MAX. | MagJack Part Number CNTRY YYWW FC Bel Stewart 850 [21.59] MAX. (.708 [17.98] J L 450 [11. ol OF (148 [3.75 HIGHEST POINT 050 [1.27] TYP +-(.599 [15.21] || (.014 [0.36]) ( .083 [2.12] ) HIGHEST POINT OF BEAM = }~.495 [10.79] f=) 025 [0.64] #.035 [0.89] +.003 [0.08] (8) 1 100 [2.54] TYP goos[ois]]} = = \ tyt_ 4 PIN Pt (SIGNAL) 1 a | _ 100 [2.54] #.062 [1.57] +.003 [0.08] (2) e TY |] @o06 [0.15]] (SHIELD) g > -<p- | 950 [6.35] ax Tt 120 [3.05] | 128 [3.25] NW L/ way tt bo o5 (2) (Posts) 160 [4.06] 125 [3.18] D+ GRN YEL | 006 [0.15] LO) J 1 | z .040 [1.02] 4.003 [0.08] (4) (LEDS) SY 2 [018] H 006 [0.15] 450 [11.43] v4 [Lon [15.26] 1 4 5 610 [15. a 6B a P.C.B. RECOMMENDED HOLE LAYOUT i SEEN FROM COMPONENT SIDE ALL CENTERLINE DIMENSIONS ARE BASIC. - .040 [1.02] NOTES: 1. CONNECTOR MATERIALS: HOUSING: THERMOPLASTIC UL94 V-0 CONTACT/SHIELD: COPPER ALLOY SHIELD PLATING: NICKEL OR TIN CONTACT PLATING: SELECTIVE GOLD, 50 MICRO-INCHES MIN. IN CONTACT AREA. PIN NOT ELECTRICALLY CONNECTED MAYBE OMITTED. SEE ELECTRICAL DRAWING FOR OMITTED PINS. TOLERANCES COMPLY WITH F.C.C. DIMENSION REQUIREMENTS. ALL TOLERANCES NOT OTHERWISE SPECIFIED TO BE +.005 [0.13] WAVE SOLDER COMPATIBLE PREHEAT 125C/90SECS. HIGH TEMPERATURE REFLOW COMPATIBLE 230C/90 SEC MAX. 3. LED SPECIFICATION 4. STANDARD LED | WAVELENGTH | FORWARD V (MAX)| #*(TYP) 9. GREEN 565 nm 25V] 22 V YELLOW 590 nm 25V] 21 *WITH A FORWARD CURRENT OF 20 mA (TYP) OF BEL STEWART CONNECTOR, THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND PROPERTY OF BEL STEWART ONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONTENT| THE SUBJECT MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. Bel Stewart Connector 11118 Susquehanna Trail, South Glen Rock, Pa 17327-9199 717.234.7512 MagJack http: //www.stewartconnector.com SHEET 3 OF 4 DRAWING NO. SI-40006|""'10656 ven] >\ 554 [14.07] SUGGESTED PANEL OPENING L 00 [0.00] (TOP OF PCB TO BOTTOM OF OPENING) 010 [0.25] MAX. RADIUS(4) 2. POINT OF CONTACT WITH PANEL 080 [2.03] ==> == \ + + tb 275 [6.98] MAX. 1. THE SUGGESTED PANEL OPENING IS INTENDED TO GIVE THE USER THE ABILITY TO HAVE REASONABLE JACK / PANEL CLEARANCES YET MAINTAIN RELIABLE GROUNDING CAPABILITY. TO BE +.005 [0.13] ALL TOLERANCES NOT OTHERWISE SPECIFIED THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND PROPERTY OF BEL STEWART Bel Stewart Connector 11118 Susquehanna Trail, South Glen Rock, Pa 17327-9199 717.234.7512 MagJad http://www.stewartconnector.com ONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONTENT) SUEET OF BEL STEWART CONNECTOR. THE SUBJECT MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. 4 OF 4 DRAWING NO. S|I-40006 REV. 08