R44E.pdf Oct.6,2016 NTC Thermistors !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. EU RoHS Compliant F**2&#.0-"3!21',2&'1!2*-%!-+.*7 5'2& - @ F - '12&# 30-.#,'0#!2'4# |z{{GG -,2&##120'!2'-,-$2&# 1#-$#02', 80"-313 12,!#1', *#!20'!*," *#!20-,'! /3'.+#,2@ FFor+-0#"#2'*1A.*#1#0#$#r2o-ur 5# 1'2#'Mur21A..roc&$o0 - ' H&22.BGG555@+302@!-+G#,#3G13..-02G!-+.*',!#G0-&1J@ R44E.pdf Oct.6,2016 R44E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Contents Product specifications are as of August 2016. Oct.6,2016 Part Numbering p2 Basic Characteristics p6 1 Temperature Sensor and Compensation 0201 (0603) Size p7 2 Temperature Sensor and Compensation 0402 (1005) Size/NCP Series p8 Temperature Sensor and Compensation 0402 (1005) Size/NCU Series p9 3 Temperature Sensor and Compensation 0603 (1608) Size/NCP Series p10 Temperature Sensor and Compensation 0603 (1608) Size/NCU Series p11 4 Temperature Sensor and Compensation 0805 (2012) Size p12 Temperature Sensor and Compensation Chip Type Standard Land Pattern Dimensions p13 Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value) p14 Temperature Sensor and Compensation Chip Type !Caution/Notice p17 Temperature Sensor and Compensation Chip Type Package p21 5 Temperature Sensor Thermo String Type p24 Temperature Sensor Thermo String Type Specifications and Test Methods p25 6 Temperature Sensor Lead Type Temperature Sensor Lead Type Specifications and Test Methods 7 Temperature Sensor Lead Insulation Type 1 2 3 4 5 p27 p28 6 p29 Temperature Sensor Lead Insulation Type Specifications and Test Methods p30 Temperature Sensor Thermo String/Lead Type Temperature Characteristics (Center Value) p31 Temperature Sensor Thermo String/Lead Type !Caution/Notice p32 Temperature Sensor Thermo String/Lead Type Package p34 8 Inrush Current Suppression Lead Type p35 Current-R Ratio (RT/R25)/ Current-Temperature Characteristics (Typical) p37 Inrush Current Suppression Lead Type !Caution/Notice p41 Inrush Current Suppression Lead Type Package p43 Please check the MURATA website (http://www.murata.com/) if you cannot find a part number in this catalog. 7 8 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. o Part Numbering NTC Thermistors for Temp. Sensor and Compensation Chip Type (Part Number) NC P 18 XH 103 J 03 RB 1 2 3 4 5 6 7 8 5Resistance 1Product ID Expressed by three-digit alphanumerics. The unit is ohm (). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures. Product ID NC NTC Thermistors Chip Type 2Series Ex. Resistance Series 102 1k P Plated Termination Series 103 10k U High Reliability Series 104 100k 3Dimensions (L x W) 6Resistance Tolerance Code Dimensions (L x W) EIA Code Resistance Tolerance 03 0.60 x 0.30mm 0201 D 0.5% 15 1.00 x 0.50mm 0402 F 1% 18 1.60 x 0.80mm 0603 E 3% 21 2.00 x 1.25mm 0805 J 5% 4Temperature Characteristics 2 Code Code Code Temperature Characteristics XC Nominal B-Constant 3100-3149K XF 7Individual Specifications Structures and other specifications are expressed by two figures. Ex. Code Individual Specifications Nominal B-Constant 3250-3299K 03/05/10/12/60 Standard Type pS Automotive Type XH Nominal B-Constant 3350-3399K XM Nominal B-Constant 3500-3549K XQ Nominal B-Constant 3650-3699K XV Nominal B-Constant 3900-3949K Code Packaging XW Nominal B-Constant 3950-3999K RA Plastic Taping 4mm Pitch (4000 pcs.) WB Nominal B-Constant 4050-4099K RB Paper Taping 4mm Pitch (4000 pcs.) WD Nominal B-Constant 4150-4199K RC Paper Taping 2mm Pitch (10000 pcs.) WF Nominal B-Constant 4250-4299K RL Paper Taping 2mm Pitch (15000 pcs.) WL Nominal B-Constant 4450-4499K WM Nominal B-Constant 4500-4549K 8Packaging R44E.pdf Oct.6,2016 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Oct.6,2016 NTC Thermistor for Temperature Sensor Thermo String Type (Part Number) NXF T 15 XH 103 1 2 3 4 5 F A 2 1Product ID 025 : 7Lead Wire Type Product ID NXF B 6 7 8 9 NTC Thermistors Sensor Thermo String Type Code Lead Wire Type A o0.3mm Copper Lead Wire with Polyurethane Coat 2Individual Specifications Code Individual Specifications T Commercial Type 8Shape of the Lead Wire Kink 3Chip Dimensions Code Dimensions (L x T) EIA 15 1.00 x 0.50mm 0402 4Temperature Characteristics Code Temperature Characteristics XH Nominal B-Constant 3350-3399K Code Shape of the Lead Wire Kink 1 Twisted Lead Wire Type 2 Standard Type 9Packaging Code Packaging B Bulk :Dimensions (Full Length) XV Nominal B-Constant 3900-3949K Code Dimensions (Full Length) WB Nominal B-Constant 4050-4099K 025 25mm WF Nominal B-Constant 4250-4299K 030 30mm 040 40mm 050 50mm 060 60mm 070 70mm 080 80mm 5Resistance Expressed by three figures. The unit is (). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures. Ex. Code Resistance 103 10k 473 47k 104 100k 6Resistance Tolerance Code Resistance Tolerance F 1% 090 90mm 100 100mm 110 110mm 120 120mm 130 130mm 140 140mm 150 150mm 3 R44E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.6,2016 NTC Thermistor for Temperature Sensor/Lead Type (Part Number) NXR T 15 XH 103 1 2 3 4 5 F A 1Product ID B 040 : 7Lead Wire Type Product ID NXR 1 6 7 8 9 NTC Thermistor Sensor/Lead Type Code Lead Wire Type A Lead Type: o0.4mm Copper-clad Fe Wire, Tinned Lead Insulation Type: o0.46mm Cu Wire with Coat 2Individual Specifications Code Individual Specifications T Commercial Type 3Chip Dimensions Code Dimensions (L x T) 15 1.00 x 0.50mm 8Shape of the Lead Wire Code Shape of the Lead Wire 1 Lead Spacing 2.5mm 3 Lead Spacing 5.0mm 5 Lead Spacing 2.5mm (Insulation Type) 9Packaging 4Temperature Characteristics Code Packaging Code Temperature Characteristics A Ammo Pack Taping XH Nominal B-Constant 3350-3399K B Bulk XM Nominal B-Constant 3500-3549K XV Nominal B-Constant 3900-3949K WB Nominal B-Constant 4050-4099K Code Lead Type Lead Insulation Type WF Nominal B-Constant 4250-4299K 010 10mm - 020 20mm - 025 - 25mm 030 30mm 30mm 035 - 35mm 040 40mm - 016 16mm (Taping Type) - 5Resistance Expressed by three figures. The unit is (). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures. Ex. Code Resistance 202 2.0k 103 10k 104 100k 6Resistance Tolerance 4 Code Resistance Tolerance F 1% E 3% J 5% :Dimensions (Full Length) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Oct.6,2016 NTC Thermistors for Inrush Current Suppression Lead Type (Part Number) NT PA7 160 L 1 2 3 BM B0 5 6 4 1Product ID 4Resistance Tolerance Product ID NT NTC Thermistors 2Series Code Resistance Tolerance L 15% 5Individual Specifications Code Series Nominal Body Diameter The lead structure and other specifications are expressed by two-digit alphanumerics. PA5 o5mm PA6 o6mm Code Individual Specifications PA7 o7mm B1 Standard Type (Ammo Pack) o7mm, o9mm BM Standard Type (Bulk) o7mm, o9mm Inrush Current Suppression Lead Type PA9 PAA o9mm Body Diameter Standard Type (Ammo Pack) o10mm, o13mm o10mm D6 PAD o13mm DK Standard (Bulk) o18mm, o22mm PAJ o18mm DN Standard (Bulk) o10mm, o13mm PAN o22mm 6Packaging 3Resistance Expressed by three-digit alphanumerics. The unit is ohm (). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures. If there is a decimal point, it is expressed by the capital letter "R." In this case, all figures are significant digits. Ex. Code Code Packaging A0 Ammo Pack Taping B0 Bulk Resistance 3R0 3 100 10 5 R44E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.6,2016 Basic Characteristics Basic Characteristics Resistance vs. Temperature 102 Resistance vs. Temperature Characteristics, R/R25 1. Zero-power Resistance of Thermistor: R R=R0 expB (1/T-1/T0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. (1) R: Resistance in ambient temperature T (K) (K: absolute temperature) R0: Resistance in ambient temperature T0 (K) B: B-Constant of Thermistor 2. B-Constant as (1) formula B= n (R/R0) / (1/T-1/T0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (2) 3. Thermal Dissipation Constant When electric power P (mW) is spent in ambient temperature T1 and thermistor temperature rises T2, the formula is as follows P=C (T2-T1) .......... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . (3) 1 10-1 B=3450 B=3900 B=4100 10-2 -20 C: Thermal dissipation constant (mW/C) Thermal dissipation constant is varied with dimensions, measurement conditions, etc. 4. Thermal Time Constant Period in which the thermistor's temperature will change 63.2% of its temperature difference from ambient temperature T0 (C) to T1 (C). 101 0 20 40 60 80 100 120 Temperature (C) Thermal Time Constant T1 Temperature X 63.2% T0 Time Performance Item Resistance Condition Measured by zero-power in specified ambient temperature. Calculated between two specified ambient temperatures by the next formula. T and T0 is absolute temperature (K). B-Constant B= Thermal Dissipation Constant n (R/R0) 1/T-1/T0 Shows necessary electric power that Thermistor's temperature rises 1C by self-heating. It is calculated by the next formula (mW/C). C= P T-T0 Rated Electric Power Shows the required electric power that causes the thermistor's temperature to rise to a specified temperature by self-heating, at ambient temperature of 25 C. Permissible Operating Current It is possible to keep the thermistor's temperature rising max. 1C. Please inquire about test conditions and ratings. 6 R44E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.6,2016 NTC Thermistors 1 Temperature Sensor and Compensation 0201 (0603) Size 0.300.03 Chip NTC Thermistors' Ni barrier termination provides excellent solderability and their unique construction offers high stability in the application's environment. 0.150.05 Features 0.150.05 0.600.03 0.300.03 1. Excellent solderability and high stability in the application's environment 2. Excellent long-term stability 3. High accuracy in resistance and B-Constant 4. Reflow soldering possible 5. NCP series are recognized by UL/cUL. (UL1434, File No.E137188) Electrode (Ag System + Ni Plating + Sn Plating) (in mm) Detailed are accessable from the following URL. http://www.murata.com/en-global/products/thermistor/ntc/ncp Applications 1. Temperature compensation for transistors, ICs, and crystal oscillators in mobile communications 2. Temperature sensor for rechargeable batteries Part Number Resistance B-Constant B-Constant B-Constant B-Constant Permissible Operating Rated Electric Typical Dissipation (25C) (25-50C) (25-80C) (25-85C) (25-100C) Current (25C) Power (25C) Constant (25C) (ohm) (K) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/C) NCP03XM102p05RL 1.0k 3500 1% 3539 3545 3560 1.00 100 1 NCP03XM152p05RL 1.5k 3500 1% 3539 3545 3560 0.81 100 1 NCP03XM222p05RL 2.2k 3500 1% 3539 3545 3560 0.67 100 1 NCP03XM332p05RL 3.3k 3500 1% 3539 3545 3560 0.55 100 1 NCP03XM472p05RL 4.7k 3500 1% 3539 3545 3560 0.46 100 1 NCP03XH682p05RL 6.8k 3380 1% 3428 3434 3455 0.38 100 1 NCP03XH103F05RL 10k 1% 3380 1% 3428 3434 3455 0.31 100 1 NCP03XH103p05RL 10k 3380 1% 3428 3434 3455 0.31 100 1 NCP03XV103p05RL 10k 3900 1% 3930 3934 3944 0.31 100 1 NCP03XH153p05RL 15k 3380 1% 3428 3434 3455 0.25 100 1 NCP03XH223p05RL 22k 3380 1% 3428 3434 3455 0.21 100 1 NCP03WF333p05RL 33k 4250 1% 4303 4311 4334 0.17 100 1 NCP03WB473p05RL 47k 4050 3% 4101 4108 4131 0.14 100 1 NCP03WL473p05RL 47k 4485 1% 4537 4543 4557 0.14 100 1 NCP03WF683p05RL 68k 4250 1% 4303 4311 4334 0.12 100 1 NCP03WL683p05RL 68k 4485 1% 4537 4543 4557 0.12 100 1 100k 1% 4250 1% 4303 4311 4334 0.10 100 1 NCP03WF104F05RL NCP03WF104p05RL 100k 4250 1% 4303 4311 4334 0.10 100 1 NCP03WL104p05RL 100k 4485 1% 4537 4543 4557 0.10 100 1 NCP03WL154p05RL 150k 4485 1% 4537 4543 4557 0.08 100 1 NCP03WL224p05RL 220k 4485 1% 4537 4543 4557 0.06 100 1 p is filled with resistance tolerance codes (E: 3%, J: 5%). Rated Electric Power shows the required electric power that the thermistor's temperature rise to 125C by self-heating, at ambient temperature of 25 C. Operating Temperature Range: -40C to +125C 7 R44E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.6,2016 NTC Thermistors Temperature Sensor and Compensation 0402 (1005) Size/NCP Series 0.50.05 2 Chip NTC Thermistors' Ni barrier termination provides excellent solderability and their unique construction offers high stability in the application's environment. 0.250.10 Features 0.250.10 1.00.05 0.50.05 1. Excellent solderability and high stability in the application's environment 2. Excellent long-term stability 3. High accuracy in resistance and B-Constant 4. Reflow soldering possible 5. Same B-constant in the same resistance in the three sizes (0805 size/0603 size/0402 size) Downsize is easy for design. 6. NCP series are recognized by UL/cUL. (UL1434, File No.E137188) Electrode (Ag System + Ni Plating + Sn Plating) (in mm) Detailed are accessable from the following URL. http://www.murata.com/en-global/products/thermistor/ntc/ncp Applications 1. Temperature compensation for transistors, ICs, and crystal oscillators in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits Part Number 8 Resistance B-Constant B-Constant B-Constant B-Constant Permissible Operating Rated Electric Typical Dissipation (25C) (25-50C) (25-80C) (25-85C) (25-100C) Current (25C) Power (25C) Constant (25C) (ohm) (K) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/C) NCP15XM221p03RC 220 3500 3% 3539 3545 3560 2.10 100 1 NCP15XM331p03RC 330 3500 3% 3539 3545 3560 1.70 100 1 NCP15XQ471p03RC 470 3650 2% 3688 3693 3706 1.40 100 1 NCP15XQ681p03RC 680 3650 3% 3688 3693 3706 1.20 100 1 NCP15XQ102p03RC 1.0k 3650 2% 3688 3693 3706 1.00 100 1 NCP15XW152p03RC 1.5k 3950 3% 3982 3987 3998 0.81 100 1 NCP15XW222p03RC 2.2k 3950 3% 3982 3987 3998 0.67 100 1 NCP15XW332p03RC 3.3k 3950 3% 3982 3987 3998 0.55 100 1 NCP15XM472p03RC 4.7k 3500 2% 3539 3545 3560 0.46 100 1 NCP15XW472p03RC 4.7k 3950 3% 3982 3987 3998 0.46 100 1 NCP15XW682p03RC 6.8k 3950 3% 3982 3987 3998 0.38 100 1 NCP15XV103p03RC 10k 3900 3% 3930 3934 3944 0.31 100 1 NCP15XW153p03RC 15k 3950 3% 3982 3987 3998 0.25 100 1 NCP15XW223p03RC 22k 3950 3% 3982 3987 3998 0.21 100 1 NCP15WL223p03RC 22k 4485 1% 4537 4543 4557 0.21 100 1 NCP15WB333p03RC 33k 4050 3% 4101 4108 4131 0.17 100 1 NCP15WL333p03RC 33k 4485 1% 4537 4543 4557 0.17 100 1 NCP15WL473p03RC 47k 4485 1% 4537 4543 4557 0.14 100 1 NCP15WD683p03RC 68k 4150 3% 4201 4209 4232 0.12 100 1 NCP15WL683p03RC 68k 4485 1% 4537 4543 4557 0.12 100 1 NCP15WL104p03RC 100k 4485 1% 4537 4543 4557 0.10 100 1 NCP15WL154p03RC 150k 4485 1% 4537 4543 4557 0.08 100 1 NCP15WM154p03RC 150k 4500 3% 4571 4582 4614 0.08 100 1 NCP15WM224p03RC 220k 4500 3% 4571 4582 4614 0.06 100 1 NCP15WM474p03RC 470k 4500 3% 4571 4582 4614 0.04 100 1 p is filled with resistance tolerance codes (E: 3%, J: 5%). Rated Electric Power shows the required electric power that the thermistor's temperature rise to 125C by self-heating, at ambient temperature of 25 C. Operating Temperature Range: -40C to +125C R44E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.6,2016 NTC Thermistors Temperature Sensor and Compensation 0402 (1005) Size/NCU Series 0.50.05 0402/0603 sized Chip NTC Thermistors have Ni barrier termination, provide excellent solderability and offer high stability in environment due to unique inner construction. This is new series, available market where request the high reliability for wide temperature sensing and compensation. 0.250.10 2 0.250.10 0.50.05 1.00.05 Features Electrode (Cu System + Ni Plating + Sn Plating) 1. Excellent solderability and high stability in the application's environment 2. Excellent long-term stability 3. High accuracy in resistance and B-Constant 4. Reflow soldering possible 5. Same B-constant in the same resistance in the three sizes (0805 size/0603 size/0402 size) Downsize is easy for design. 6. NCU series are recognized by UL/cUL. (UL1434, File No.E137188) (in mm) Detailed are accessable from the following URL. http://www.murata.com/en-global/products/thermistor/ntc/ncu Applications 1. Temperature compensation for transistors, ICs, and crystal oscillators in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits Part Number NCU15XH103D60RC NCU15XH103F60RC NCU15XH103p60RC NCU15WB473D60RC Resistance (25C) (ohm) B-Constant B-Constant B-Constant B-Constant Permissible Operating Rated Electric Typical Dissipation (25-50C) (25-80C) (25-85C) (25-100C) Current (25C) Power (25C) Constant (25C) (K) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/C) 10k 0.5% 3380 0.7% 3428 3434 3455 0.31 100 1 10k 1% 3380 1% 3428 3434 3455 0.31 100 1 10k 3380 1% 3428 3434 3455 0.31 100 1 4101 4108 4131 0.14 100 1 47k 0.5% 4050 0.5% NCU15WB473F60RC 47k 1% 4050 1% 4101 4108 4131 0.14 100 1 NCU15WB473p60RC 47k 4050 1% 4101 4108 4131 0.14 100 1 NCU15WF104D60RC 100k 0.5% 4250 0.5% 4303 4311 4334 0.1 100 1 NCU15WF104F60RC 100k 1% 4250 1% 4303 4311 4334 0.1 100 1 NCU15WF104p60RC 100k 4250 1% 4303 4311 4334 0.1 100 1 p is filled with resistance tolerance codes (E: 3%, J: 5%). Rated Electric Power is necessary electric power for Thermistor's temperature to rise 100C by self heating at 25C in still air. Operating Temperature Range: -40C to +125C If there is any additionally electrical characteristics, please contact from close sales office or website. 9 R44E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.6,2016 NTC Thermistors Temperature Sensor and Compensation 0603 (1608) Size/NCP Series 0.80.15 Chip NTC Thermistors' Ni barrier termination provides excellent solderability and their unique construction offers high stability in the application's environment. 0.2-0.6 Features 3 0.2-0.6 1.60.15 0.80.15 1. Excellent solderability and high stability in the application's environment 2. Excellent long-term stability 3. High accuracy in resistance and B-constant 4. Flow/Reflow soldering possible 5. Same B-Constant in the same resistance in the three sizes (0805 size/0603 size/0402 size) Downsize is easy for design. 6. NCP series are recognized by UL/cUL. (UL1434, File No.E137188) Electrode (Ag System + Ni Plating + Sn Plating) (in mm) Detailed are accessable from the following URL. http://www.murata.com/en-global/products/thermistor/ntc/ncp Applications 1. Temperature compensation for transistors, ICs, and crystal oscillators in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits Part Number Resistance B-Constant B-Constant B-Constant B-Constant Permissible Operating Rated Electric Typical Dissipation (25C) (25-50C) (25-80C) (25-85C) (25-100C) Current (25C) Power (25C) Constant (25C) (ohm) (K) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/C) NCP18XM221p03RB 220 3500 3% 3539 3545 3560 2.10 100 1 NCP18XM331p03RB 330 3500 3% 3539 3545 3560 1.70 100 1 NCP18XQ471p03RB 470 3650 2% 3688 3693 3706 1.40 100 1 NCP18XQ681p03RB 680 3650 3% 3688 3693 3706 1.20 100 1 NCP18XQ102p03RB 1.0k 3650 2% 3688 3693 3706 1.00 100 1 NCP18XW152p03RB 1.5k 3950 3% 3982 3987 3998 0.81 100 1 NCP18XW222p03RB 2.2k 3950 3% 3982 3987 3998 0.67 100 1 NCP18XW332p03RB 3.3k 3950 3% 3982 3987 3998 0.55 100 1 NCP18XM472p03RB 4.7k 3500 2% 3539 3545 3560 0.46 100 1 NCP18XW472p03RB 4.7k 3950 3% 3982 3987 3998 0.46 100 1 NCP18XW682p03RB 6.8k 3950 3% 3982 3987 3998 0.38 100 1 NCP18XV103p03RB 10k 3900 3% 3930 3934 3944 0.31 100 1 NCP18XW153p03RB 15k 3950 3% 3982 3987 3998 0.25 100 1 NCP18XW223p03RB 22k 3950 3% 3982 3987 3998 0.21 100 1 NCP18WB333p03RB 33k 4050 3% 4101 4108 4131 0.17 100 1 NCP18WD683p03RB 68k 4150 3% 4201 4209 4232 0.12 100 1 NCP18WM154p03RB 150k 4500 3% 4571 4582 4614 0.08 100 1 NCP18WM224p03RB 220k 4500 3% 4571 4582 4614 0.06 100 1 NCP18WM474p03RB 470k 4500 3% 4571 4582 4614 0.04 100 1 p is filled with resistance tolerance codes (E: 3%, J: 5%). Rated Electric Power shows the required electric power that the thermistor's temperature rise to 125C by self-heating, at ambient temperature of 25 C. Operating Temperature Range: -40C to +125C 10 R44E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.6,2016 NTC Thermistors Temperature Sensor and Compensation 0603 (1608) Size/NCU Series 0.80.15 0402/0603 sized Chip NTC Thermistors have Ni barrier termination, provide excellent solderability and offer high stability in environment due to unique inner construction. This is new series, available market where request the high reliability for wide temperature sensing and compensation. 0.2-0.6 0.2-0.6 0.80.15 1.60.15 Features Electrode (Cu System + Ni Plating + Sn Plating) 1. Excellent solderability and high stability in the application's environment 2. Excellent long-term stability 3. High accuracy in resistance and B-constant 4. Flow/Reflow soldering possible 5. Same B-Constant in the same resistance in the three sizes (0805 size/0603 size/0402 size) Downsize is easy for design. 6. NCU series are recognized by UL/cUL. (UL1434, File No.E137188) (in mm) 3 Detailed are accessable from the following URL. http://www.murata.com/en-global/products/thermistor/ntc/ncu Applications 1. Temperature compensation for transistors, ICs, and crystal oscillators in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits Part Number NCU18XH103D60RB Resistance (25C) (ohm) B-Constant B-Constant B-Constant B-Constant Permissible Operating Rated Electric Typical Dissipation (25-50C) (25-80C) (25-85C) (25-100C) Current (25C) Power (25C) Constant (25C) (K) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/C) 10k 0.5% 3380 0.7% 3428 3434 3455 0.31 100 1 NCU18XH103F60RB 10k 1% 3380 1% 3428 3434 3455 0.31 100 1 NCU18XH103p60RB 10k 3380 1% 3428 3434 3455 0.31 100 1 NCU18WB473D60RB 4101 4108 4131 0.14 100 1 NCU18WB473F60RB 47k 0.5% 4050 0.5% 47k 1% 4050 1% 4101 4108 4131 0.14 100 1 NCU18WB473p60RB 47k 4050 1% 4101 4108 4131 0.14 100 1 NCU18WF104D60RB 100k 0.5% 4250 0.5% 4303 4311 4334 0.1 100 1 NCU18WF104F60RB 100k 1% 4250 1% 4303 4311 4334 0.1 100 1 NCU18WF104p60RB 100k 4250 2% 4303 4311 4334 0.1 100 1 p is filled with resistance tolerance codes (E: 3%, J: 5%). Rated Electric Power is necessary electric power for Thermistor's temperature to rise 100C by self heating at 25C in still air. Operating Temperature Range: -40C to +125C If there is any additionally electrical characteristics, please contact from close sales office or website. 11 R44E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.6,2016 NTC Thermistors 1.250.2 Temperature Sensor and Compensation 0805 (2012) Size Chip NTC Thermistors' Ni barrier termination provides excellent solderability and their unique construction offers high stability in the application's environment. 0.2-0.7 Features 4 0.2-0.7 2.00.2 0.850.15 1. Excellent solderability and high stability in the application's environment 2. Excellent long-term stability 3. High accuracy in resistance and B-constant 4. Flow/Reflow soldering possible 5. Same B-Constant in the same resistance in the three sizes (0805 size/0603 size/0402 size) Downsize is easy for design. 6. NCP series are recognized by UL/cUL. (UL1434, File No.E137188) Electrode (Ag System + Ni Plating + Sn Plating) (in mm) Detailed are accessable from the following URL. http://www.murata.com/en-global/products/thermistor/ntc/ncp Applications 1. Temperature compensation for transistors, ICs, and crystal oscillators in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits Part Number Resistance B-Constant B-Constant B-Constant B-Constant Permissible Operating Rated Electric Typical Dissipation (25C) (25-50C) (25-80C) (25-85C) (25-100C) Current (25C) Power (25C) Constant (25C) (ohm) (K) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/C) NCP21XM221J03RA 220 5% 3500 3% 3539 3545 3560 3.00 200 2 NCP21XQ471J03RA 470 5% 3650 3% 3688 3693 3706 2.00 200 2 NCP21XQ102J03RA 1.0k 5% 3650 3% 3688 3693 3706 1.40 200 2 NCP21XW222J03RA 2.2k 5% 3950 3% 3982 3987 3998 0.90 200 2 NCP21XM472J03RA 4.7k 5% 3500 3% 3539 3545 3560 0.65 200 2 NCP21XV103J03RA 10k 5% 3900 3% 3930 3934 3944 0.44 200 2 NCP21XW153J03RA 15k 5% 3950 3% 3982 3987 3998 0.36 200 2 NCP21XW223J03RA 22k 5% 3950 3% 3982 3987 3998 0.30 200 2 NCP21WB333J03RA 33k 5% 4050 3% 4101 4108 4131 0.24 200 2 NCP21WB473J03RA 47k 5% 4050 3% 4101 4108 4131 0.20 200 2 NCP21WF104J03RA 100k 5% 4250 3% 4303 4311 4334 0.14 200 2 Rated Electric Power shows the required electric power that the thermistor's temperature rise to 125C by self-heating, at ambient temperature of 25 C. Operating Temperature Range: -40C to +125C 12 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Oct.6,2016 Temperature Sensor and Compensation Chip Type Standard Land Pattern Dimensions c Chip b Solder Resist Land a Dimensions (mm) Soldering Methods Chip (LxW) a b Reflow Soldering 0.6x0.3 NCP03 0.25 0.3 NCP15/NCU15 Reflow Soldering 1.0x0.5 0.4 0.4-0.5 0.6-1.0 0.8-0.9 Flow Soldering 1.6x0.8 NCP18 0.6-0.8 0.6-0.7 Reflow Soldering 0.6-1.2 0.8-0.9 Flow Soldering 1.6x0.8 NCU18 0.6-1.2 0.6-0.7 Reflow Soldering 1.0-1.1 0.9-1.0 Flow Soldering 2.0x1.25 NCP21 1.0-1.1 0.6-0.7 Reflow Soldering Part Number c 0.3 0.5 0.6-0.8 0.6-0.8 0.6-0.8 0.6-0.8 1.0-1.2 1.0-1.2 13 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Oct.6,2016 Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value) Part Number NCPppXM221 NCPppXM331 NCPppXQ471 NCPppXQ681 NCPppXM102 NCPppXQ102 NCPppXM152 NCPppXW152 Resistance 220 330 680 1.0k 470 1.0k 1.5k 1.5k B-Constant 3500K 3650K 3500K 3500K 3650K 3650K 3500K 3950K Temp. (C) Resistance () Resistance () Resistance () Resistance () Resistance (k) Resistance (k) Resistance (k) Resistance (k) -40 4947.904 7421.856 17104.854 21.266 11822.473 25.154 31.899 51.791 -35 3703.755 5555.632 12685.248 16.150 8767.745 18.655 24.225 37.172 -30 2798.873 4198.309 9505.855 12.347 6570.224 13.979 18.520 27.005 -25 2135.887 3203.831 7193.219 9.503 4971.784 10.578 14.255 19.843 -20 1645.037 2467.555 5493.436 7.365 3796.933 8.079 11.047 14.728 -15 1278.034 1917.051 4229.599 5.747 2923.400 6.220 8.621 11.044 -10 1000.620 1500.930 3283.675 4.516 2269.599 4.829 6.773 8.362 -5 789.612 1184.418 2568.411 3.572 1775.225 3.777 5.358 6.389 0 627.752 941.628 2024.158 2.844 1399.050 2.977 4.266 4.922 5 502.474 753.711 1606.275 2.280 1110.220 2.362 3.419 3.825 10 405.010 607.514 1283.691 1.839 887.257 1.888 2.758 2.994 15 328.480 492.720 1032.245 1.492 713.463 1.518 2.238 2.361 20 268.044 402.066 835.351 1.218 577.375 1.229 1.827 1.876 25 220.000 330.000 680.000 1.000 470.000 1.000 1.500 1.500 30 181.576 272.365 556.733 0.825 384.800 0.819 1.238 1.207 35 150.668 226.002 458.287 0.685 316.757 0.674 1.027 0.978 40 125.681 188.521 379.320 0.571 262.177 0.558 0.857 0.797 45 105.336 158.004 315.504 0.479 218.069 0.464 0.718 0.653 50 88.717 133.076 263.749 0.403 182.297 0.388 0.605 0.538 55 75.059 112.588 221.579 0.341 153.150 0.326 0.512 0.446 60 63.777 95.666 186.998 0.290 129.249 0.275 0.435 0.371 65 54.415 81.622 158.499 0.247 109.551 0.233 0.371 0.311 70 46.631 69.946 134.960 0.212 93.281 0.199 0.318 0.261 75 40.115 60.172 115.383 0.182 79.750 0.170 0.274 0.221 80 34.637 51.955 99.029 0.157 68.446 0.146 0.236 0.187 85 30.013 45.019 85.356 0.136 58.996 0.126 0.205 0.160 90 26.110 39.165 73.839 0.119 51.036 0.109 0.178 0.137 95 22.790 34.186 64.140 0.104 44.332 0.094 0.155 0.117 100 19.957 29.935 55.905 0.091 38.640 0.082 0.136 0.101 105 17.541 26.312 48.888 0.080 33.790 0.072 0.120 0.088 110 15.453 23.180 42.918 0.070 29.664 0.063 0.105 0.076 115 13.663 20.494 37.795 0.062 26.123 0.056 0.093 0.067 120 12.114 18.171 33.409 0.055 23.091 0.049 0.083 0.058 125 10.778 16.168 29.618 0.049 20.472 0.044 0.074 0.051 Part Number NCPppXM222 NCPppXW222 NCPppXM332 NCPppXW332 NCPppXM472 NCPppXW472 NCPppXH682 NCPppXW682 3.3k 4.7k 3.3k 2.2k 4.7k Resistance 2.2k 6.8k 6.8k 3950K 3950K 3500K 3500K 3500K 3950K B-Constant 3380K 3950K Temp. (C) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) 162.279 70.179 -40 46.786 105.705 75.961 133.043 234.787 113.941 116.474 53.295 -35 35.530 79.126 54.520 100.756 168.515 81.779 84.615 40.743 -30 27.162 59.794 39.607 77.076 122.422 59.411 62.173 31.360 -25 20.907 45.630 29.103 59.540 89.953 43.654 46.147 24.304 -20 16.203 35.144 21.601 46.401 66.766 32.401 34.604 18.966 -15 12.644 27.303 16.198 36.482 50.066 24.297 26.200 14.901 -10 9.934 21.377 12.264 28.904 37.906 18.396 20.018 11.787 -5 7.858 16.869 9.370 23.047 28.963 14.055 10.829 15.423 9.386 0 6.257 13.411 7.219 18.509 22.313 8.414 11.984 7.523 5 5.015 10.735 5.609 14.974 17.338 6.586 9.380 6.067 10 4.045 8.653 4.391 12.189 13.571 5.195 7.399 4.924 15 3.283 7.018 3.463 9.978 10.705 4.126 5.877 4.019 20 2.680 5.726 2.751 8.215 8.503 3.300 4.700 3.300 25 2.200 4.700 2.200 6.800 6.800 2.656 3.783 2.724 30 1.816 3.879 1.771 5.654 5.474 2.152 3.064 2.260 35 1.507 3.219 1.434 4.725 4.434 1.753 2.497 1.885 40 1.257 2.685 1.169 3.967 3.613 1.437 2.046 1.580 45 1.053 2.250 0.958 3.344 2.961 1.184 1.686 1.331 50 0.887 1.895 0.789 2.829 2.440 0.981 1.397 1.126 55 0.751 1.604 0.654 2.404 2.022 0.817 1.164 0.957 60 0.638 1.363 0.545 2.050 1.683 0.684 0.974 0.816 65 0.544 1.163 0.456 1.759 1.409 0.575 0.819 0.700 70 0.466 0.996 0.383 1.515 1.185 0.486 0.692 0.602 75 0.401 0.857 0.324 1.309 1.001 0.412 0.587 0.520 80 0.346 0.740 0.275 1.135 0.849 0.351 0.500 0.450 85 0.300 0.641 0.234 0.988 0.724 0.301 0.428 0.392 90 0.261 0.558 0.200 0.862 0.620 0.258 0.368 0.342 95 0.228 0.487 0.172 0.755 0.532 0.223 0.318 0.299 100 0.200 0.426 0.149 0.662 0.459 0.193 0.275 0.263 105 0.175 0.375 0.129 0.583 0.398 0.168 0.239 110 0.232 0.155 0.330 0.112 0.515 0.346 0.146 0.208 115 0.205 0.137 0.292 0.098 0.457 0.302 0.128 0.182 120 0.182 0.121 0.259 0.085 0.406 0.264 0.113 0.160 125 0.162 0.108 0.230 0.075 0.361 0.232 Continued on the following page. 14 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Oct.6,2016 Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value) Continued from the preceding page. Part Number NCPppXV103 NCPppXH153 NCPppXW153 NCPppXH223 NCPppXW223 NCPppWL223 NCPppWB333 NCPppWF333 22k 33k 33k 15k Resistance 10k 15k 22k 22k 3380K 4250K 4050K 3380K 3900K B-Constant 3950K 3950K 4485K Temp. (C) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) 430.434 -40 1227.263 293.478 328.996 517.912 759.605 1073.436 1451.049 325.976 -35 874.449 222.256 237.387 371.724 545.196 753.900 1019.238 249.364 -30 630.851 170.021 173.185 270.048 396.070 535.073 725.084 522.021 192.629 -25 460.457 131.338 127.773 198.426 291.025 383.590 379.842 150.121 -20 339.797 102.355 95.327 147.278 216.008 277.643 279.371 118.029 -15 253.363 80.474 71.746 110.439 161.977 202.813 207.566 93.514 -10 190.766 63.759 54.564 83.617 122.638 149.462 155.639 74.563 -5 144.964 50.838 41.813 63.888 93.702 111.082 117.814 59.881 0 111.087 40.828 32.330 49.221 72.191 83.233 89.925 48.446 5 85.842 33.032 25.194 38.245 56.093 62.858 69.204 39.436 10 66.861 26.888 19.785 29.936 43.907 47.831 53.675 32.282 15 52.470 22.010 15.651 23.613 34.633 36.664 41.937 26.577 20 41.471 18.121 12.468 18.756 27.509 28.304 33.000 22.000 25 33.000 15.000 10.000 15.000 22.000 22.000 26.143 18.292 30 26.430 12.472 8.072 12.074 17.709 17.214 20.845 15.285 35 21.298 10.422 6.556 9.780 14.344 13.557 16.723 12.834 40 17.266 8.751 5.356 7.969 11.688 10.744 13.498 10.817 45 14.076 7.375 4.401 6.531 9.578 8.566 10.954 9.154 50 11.538 6.241 3.635 5.382 7.894 6.871 8.940 7.777 55 9.506 5.302 3.019 4.459 6.540 5.544 7.334 6.631 60 7.870 4.521 2.521 3.713 5.446 4.498 6.046 5.690 65 6.549 3.879 2.115 3.108 4.559 3.669 5.011 4.901 70 5.475 3.341 1.781 2.613 3.832 3.009 4.170 4.234 75 4.595 2.887 1.509 2.208 3.239 2.479 3.487 3.671 80 3.874 2.503 1.284 1.873 2.748 2.052 2.928 3.195 85 3.282 2.178 1.097 1.597 2.342 1.707 2.469 2.790 90 2.789 1.902 0.941 1.367 2.004 1.426 2.091 2.441 95 2.379 1.664 0.810 1.174 1.722 1.196 1.777 2.142 100 2.038 1.461 0.701 1.013 1.486 1.008 1.516 1.888 105 1.751 1.287 0.608 0.878 1.287 0.852 1.298 1.668 110 1.509 1.137 0.530 0.763 1.119 0.724 1.116 1.477 115 1.306 1.007 0.463 0.665 0.975 0.617 0.962 1.312 120 1.134 0.895 0.406 0.582 0.854 0.528 0.832 1.169 125 0.987 0.797 0.358 0.511 0.750 0.454 Part Number NCPppWL333 NCPppWL473 NCPppWD683 NCPppWF683 NCPppWL683 NCPppWL104 NCPppWL154 NCPppWM154 68k 33k 100k 47k 150k 150k Resistance 68k 68k 4485K 4485K 4485K 4485K 4485K 4500K B-Constant 4250K 4150K Temp. (C) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) 3317.893 1610.154 4879.254 2293.249 7318.881 -40 7899.466 2990.041 2735.359 2330.237 1130.850 3426.818 1610.605 5140.228 -35 5466.118 2100.247 1937.391 1653.862 802.609 2432.149 1143.110 3648.224 -30 3834.499 1494.113 1389.345 1185.641 575.385 1743.590 819.487 2615.385 -25 2720.523 1075.679 1008.014 858.168 416.464 1262.012 593.146 1893.018 -20 1951.216 782.705 738.978 626.875 304.219 921.875 433.281 1382.813 -15 1415.565 575.674 547.456 461.974 224.193 679.373 319.305 1019.059 -10 1036.984 427.712 409.600 343.345 166.623 504.919 237.312 757.379 -5 767.079 320.710 309.217 257.266 124.850 378.333 177.816 567.499 0 572.667 242.768 235.606 194.287 94.287 285.717 134.287 428.575 5 431.264 185.300 180.980 147.841 71.747 217.414 102.184 326.121 10 327.405 142.603 140.139 113.325 54.996 166.654 78.327 249.981 15 250.538 110.602 109.344 87.484 42.455 128.653 60.467 192.979 20 193.166 86.415 85.929 68.000 33.000 100.000 47.000 150.000 25 150.000 68.000 68.000 53.208 25.822 78.247 36.776 117.370 30 117.281 53.871 54.167 41.903 20.335 61.622 28.962 92.433 35 92.293 42.954 43.421 33.208 16.115 48.835 22.952 73.252 40 73.090 34.460 35.016 26.477 12.849 38.937 18.301 58.406 45 58.240 27.814 28.406 21.237 10.306 31.231 14.679 46.846 50 46.665 22.572 23.166 17.137 8.317 25.202 11.845 37.803 55 37.605 18.422 18.997 13.904 6.748 20.448 9.610 30.671 60 30.453 15.113 15.657 11.342 5.504 16.679 7.839 25.018 65 24.804 12.459 12.967 9.299 4.513 13.675 6.427 20.513 70 20.293 10.325 10.794 7.662 3.718 11.268 5.296 16.902 75 16.679 8.592 9.021 6.343 3.078 9.329 4.384 13.993 80 13.776 7.185 7.575 5.276 2.560 7.758 3.646 11.638 85 11.428 6.033 6.387 4.407 2.139 6.481 3.046 9.721 90 9.520 5.087 5.407 3.697 1.794 5.437 2.555 8.155 95 7.966 4.309 4.598 3.114 1.511 4.580 2.152 6.869 100 6.688 3.661 3.922 2.634 1.278 3.873 1.820 5.810 105 5.639 3.124 3.359 2.236 1.085 3.289 1.546 4.933 110 4.772 2.675 2.887 1.907 0.925 2.804 1.318 4.206 115 4.052 2.299 2.489 1.632 0.792 2.400 1.128 3.601 120 3.454 1.983 2.155 1.403 0.681 2.064 0.970 3.096 125 2.955 1.715 1.870 Continued on the following page. 15 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value) Continued from the preceding page. Part Number NCPppWL224 NCPppWM224 NCPppWM474 470k Resistance 220k 220k 4500K B-Constant 4500K 4485K Temp. (C) Resistance (k) Resistance (k) Resistance (k) -40 24751.661 10734.358 11585.884 -35 17127.169 7539.001 8016.973 -30 12014.762 5350.729 5623.931 -25 8524.305 3835.898 3990.100 -20 6113.811 2776.427 2861.784 -15 4435.437 2028.126 2076.162 -10 3249.216 1494.620 1520.909 -5 2403.515 1110.822 1125.049 0 1794.358 832.332 839.912 5 1351.294 628.577 632.521 10 1025.870 478.310 480.194 15 785.018 366.639 367.455 20 605.252 283.036 283.310 25 470.000 220.000 220.000 30 367.480 172.143 172.012 35 289.186 135.569 135.364 40 229.014 107.436 107.198 45 182.485 85.662 85.419 50 146.215 68.708 68.441 55 117.828 55.444 55.153 60 95.420 44.984 44.665 65 77.718 36.694 36.379 70 63.584 30.085 29.763 75 52.260 24.789 24.462 80 43.166 20.523 20.205 85 35.808 17.068 16.761 90 29.828 14.258 13.962 95 24.961 11.961 11.684 100 20.955 10.075 9.809 105 17.668 8.521 8.270 110 14.951 7.236 6.998 115 12.695 6.169 5.942 120 10.824 5.281 5.067 125 9.259 4.540 4.334 Part Number NCUppXH103D NCUppXH103 NCUppWB473D NCUppWB473 NCUppWF104D NCUppWF104 10k0.5% Resistance 10k 47k0.5% 100k0.5% 47k 100k 3380K 3380K B-Constant 4050K 4250K 4050K 4250K Temp. (C) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) 197.390 1690.586 4221.283 195.652 -40 4397.119 1747.920 1245.428 149.390 1215.318 2995.044 148.171 -35 3088.599 898.485 114.340 882.908 2146.996 113.347 -30 2197.225 655.802 88.381 647.911 1554.599 87.559 -25 1581.881 483.954 68.915 480.069 1136.690 68.237 -20 1151.037 360.850 54.166 359.009 839.019 53.650 -15 846.579 271.697 42.889 270.868 624.987 42.506 -10 628.988 206.463 34.196 206.113 469.678 33.892 -5 471.632 158.214 27.445 158.126 355.975 27.219 0 357.012 122.259 22.165 122.267 272.011 22.021 5 272.500 95.227 18.010 95.256 209.489 17.926 10 209.710 74.730 14.720 74.754 162.559 14.674 15 162.651 59.065 12.099 59.075 127.057 12.081 20 127.080 47.000 10.000 47.000 100.000 10.000 25 100.000 37.643 8.309 37.636 79.222 8.315 30 79.222 30.334 6.939 30.326 63.167 6.948 35 63.167 24.591 5.824 24.583 50.677 5.834 40 50.677 20.048 4.911 20.043 40.904 4.917 45 40.904 16.433 4.160 16.433 33.195 4.161 50 33.195 13.539 3.539 13.545 27.091 3.535 55 27.091 11.209 3.024 11.223 22.224 3.014 60 22.224 9.328 2.593 9.345 18.323 2.586 65 18.323 7.798 2.233 7.818 15.184 2.228 70 15.184 6.544 1.929 6.571 12.635 1.925 75 12.635 5.518 1.673 5.548 10.566 1.669 10.566 80 4.674 1.455 4.704 8.873 1.452 8.873 85 3.972 1.270 4.004 7.481 1.268 7.481 90 3.388 1.112 3.422 6.337 1.110 6.337 95 2.902 0.976 2.936 5.384 0.974 5.384 100 2.494 0.860 2.528 4.594 0.858 4.594 105 2.150 0.759 2.184 3.934 0.758 3.934 110 1.860 0.673 1.893 3.380 0.672 3.380 115 1.615 0.598 1.646 2.916 0.596 2.916 120 1.406 0.532 1.436 2.522 0.531 2.522 125 16 Continued on the following page. R44E.pdf Oct.6,2016 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Oct.6,2016 Temperature Sensor and Compensation Chip Type !Caution/Notice !Caution (Storage and Operating Conditions) This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because all of these factors can deteriorate the product characteristics or cause failures and burn-out. 1. Corrosive gas or deoxidizing gas (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) 2. Volatile or flammable gas 3. Dusty conditions 4. Under vacuum, or under high or low pressure 5. Wet or humid locations 6. Places with salt water, oils, chemical liquids or organic solvents 7. Strong vibrations 8. Other places where similar hazardous conditions exist !Caution (Others) Be sure to provide an appropriate fail-safe function on your product to prevent secondary damage that may be caused by the abnormal function or the failure of our product. Notice (Storage and Operating Conditions) To keep the solderability of the product from degrading, the following storage conditions are recommended. 1. Storage condition: Temperature -10 to +40C Humidity less than 75%RH (not dewing condition) 2. Storage term: Use this product within 6 months after delivery by first-in and first-out stocking system. 3. Storage place: Do not store this product in corrosive gas (Sulfuric acid gas, Chlorine gas, etc.) or in direct sunlight. Notice (Rating) Use this product within the specified temperature range. Higher temperature may cause deterioration of the characteristics or the material quality of this product. Notice (Handling) The ceramic of this product is fragile, and care must be taken not to load an excessive press-force or to cause a shock at handling. Such forces may cause cracking or chipping. 17 R44E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.6,2016 Temperature Sensor and Compensation Chip Type !Caution/Notice Notice (Soldering and Mounting) 1. Mounting Position Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board. Component Direction Locate this product horizontal to the direction in which stress acts. Mounting Close to Board Separation Line C Perforation Holes A (a) Solder within the temperature and time combinations indicated by the slanted lines in the following graphs. (b) Excessive soldering conditions may cause dissolution of metallization or deterioration of solder-wetting on the external electrode. (c) In case of repeated soldering, the accumulated soldering time should be within the range shown in the figure below. (For example, Reflow peak temperature: 260C, twice -> The total accumulated soldering time at 260C is within 30 seconds.) D Slit Keep this product on the PC Board away from the Separation Line. Worst A-C-B-D Better NCP03/15 Series, NCU15 Series Allowable Reflow Soldering Temp. and Time 280 Temperature (C) 2. Allowable Soldering Temperature and Time B 270 260 250 240 230 220 0 10 20 30 40 50 60 70 80 90 Time (sec.) NCP18/21 Series, NCU18 Series Allowable Reflow Soldering Temp. and Time 280 280 270 270 Temperature (C) Temperature (C) Allowable Flow Soldering Temp. and Time 260 250 240 230 220 210 260 250 240 230 220 210 0 10 20 Time (sec.) 30 0 10 20 30 40 50 60 70 80 90 100110 Time (sec.) Continued on the following page. 18 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Oct.6,2016 Temperature Sensor and Compensation Chip Type !Caution/Notice Continued from the preceding page. (a) Insufficient preheating may cause a crack on the ceramic body. The difference between preheating temperature and maximum temperature in the profile shall be 100 C. (b) Rapid cooling by dipping in solvent or by other means is not recommended. NCP03/15 Series, NCU15 Series Reflow Soldering Conditions Temperature (C) 3. Recommended Temperature Profile for Soldering 300 Preheating (in air) Soldering 1-2 min. *20sec. Gradual Cooling (in air) 200 100 0 * In case of repeated soldering, the accumulated soldering time should be within the range shown in the figure of section 2. Preheating: 16010C, 1-2 min. Soldering: 240-270C, 20sec. NCP18/21 Series, NCU18 Series 300 Preheating (in air) Reflow Soldering Conditions Gradual Cooling Soldering (in air) Temperature (C) Temperature (C) Flow Soldering Conditions 200 100 0 1-2 min. Soldering 1-2 min. *20sec. Gradual Cooling (in air) 200 100 0 *10sec. Preheating (in air) 300 Preheating: 16010C, 1-2 min. Soldering: 230-270C, 20sec. Preheating: 16010C, 1-2 min. Soldering: 230-260C, 10sec. 4. Solder and Flux (1) Solder and Paste (a) Reflow Soldering: NCP03/15/18/21 Series, NCU15/18 Series Use RA/RMA type or equivalent type of solder paste. For your reference, we use the solder paste below for any internal tests of this product. aRMA9086 90-4-M20 (Sn:Pb=63wt%:37wt%) (Manufactured by Alpha Metals Japan Ltd.) aM705-221BM5-42-11 (Sn:Ag:Cu=96.5wt%:3.0wt%:0.5wt%) (Manufactured by Senju Metal Industry Co., Ltd.) (b) Flow Soldering: NCP18/21 Series, NCU18 Series We use the solder paste below for any internal tests of this product. aSn:Pb=63wt%:37wt% aSn:Ag:Cu=96.5wt%:3.0wt%:0.5wt% (2) Flux Use rosin type flux in the soldering process. If the flux listed below is used, some problems might be caused in the product characteristics and reliability. Please do not use the following flux. a Strong acidic flux (with halide content exceeding 0.1wt%). a Water-soluble flux (*Water-soluble flux can be defined as non-rosin type flux including wash-type flux and non-wash-type flux.) 5. Cleaning Conditions For removing the flux after soldering, observe the following points in order to avoid deterioration of the characteristics or any change of the external electrodes' quality. a Please keep mounted parts and a substrate from an occurrence of resonance in ultrasonic cleaning. a Please do not clean the products in the case of using a non-wash-type flux. NCP03/15, NCU15 NCP18/21, NCU18 Solvent Isopropyl Alcohol Isopropyl Alcohol Dipping Cleaning Less than 5 minutes at room temp. or less than 2 minutes at 40C max. Less than 5 minutes at room temp. or less than 2 minutes at 40C max. Ultrasonic Cleaning Less than 5 minutes and 20W/ Frequency of 28kHz to 40kHz Less than 1 minute and 20W/ Frequency of several 10kHz to 100kHz 6. Drying After cleaning, promptly dry this product. Continued on the following page. 19 R44E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.6,2016 Temperature Sensor and Compensation Chip Type !Caution/Notice Continued from the preceding page. 7. Printing Conditions of Solder Paste Reference: Optimum Solder Amount o The amount of solder is critical. Standard height of fillet is shown in the table below. o Too much solder may cause mechanical stress, resulting in cracking, mechanical and/or electronic damage. E T Electrode Solder Solder Part Number Solder Paste Thickness NCP03 100m NCP15, NCU15 150m NCP18/NCP21, NCU18 200m 8. Adhesive Application and Curing o Thin or insufficient adhesive may result in loose component contact with land during flow soldering. o Low viscosity adhesive causes chips to slip after mounting. 20 T 1/3E< =T< =E 1/3E< =T< =E 0.2mm< =T< =E R44E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.6,2016 Temperature Sensor and Compensation Chip Type Package Minimum Quantity Guide Part Number Quantity (pcs.) Paper Tape NCP03 15000 NCP15, NCU15 10000 NCP18, NCU18 4000 NCP21 - Embossed Tape 4000 Tape Carrier Packaging 1. Dimensions of Reel 2.00.5 o60 +1.0 -0 o13.00.2 o21.00.8 +1.0 9.0-0 +0 o180-1.5 (in mm) 2. Taping Method (1) A tape in a reel contains Leader unit and Trailer unit where products are not packed. (Please refer to the figure at the Leader Unit 190-250 210-250 40 min. Trailer Unit Vacant Section Top Tape alone Cover Tape alone right.) (2) The top and base tapes or plastic and cover tape are not Chip-mounting Unit stuck at the first five pitches minimum. (3) A label should be attached on the reel. (MURATA's part number, inspection number and quantity should be marked on the label.) Direction of Feed (in mm) (4) Taping reels are packed in a package. Continued on the following page. 21 R44E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.6,2016 Temperature Sensor and Compensation Chip Type Package Continued from the preceding page. 3. Paper Tape (NCP03/15/18 Series, NCU15/18 Series) 0.8 max. 0.38* 8.00.3 o1.5+0.1/-0 1.15* 8.00.3 0.68* 2.00.05 4.00.1 0.5 max. 3.50.05 1.750.1 o1.5+0.1/-0 3.50.05 2.00.05 4.00.1 1.750.1 NCP15, NCU15 Series NCP03 Series 0.65* Direction of Feed Direction of Feed * Reference Value * Reference Value 1.1 max. 1.85* 8.00.3 o1.5+0.1/-0 3.50.05 2.00.05 4.00.1 4.00.1 1.750.1 NCP18, NCU18 Series 1.05* Direction of Feed * Reference Value (in mm) (1) Other Conditions (a) Packaging Products are packaged in the cavity of the base tape and sealed by a top tape and bottom tape. (b) Tape The top tape and bottom tape have no joints and products are packaged and sealed in the cavity of the base tape, continuously. (2) Peeling Force of Top Tape 165-180 F * 1 Peeling angle: 165 to 180 against the fixed surface of tape. * 2 Peeling speed: 300mm/min. * 3 Peeling force: 0.1 - 0.6N (3) Pull Strength Pull strength of top tape is specified at 10N minimum. Pull strength of bottom tape should be specified 5N minimum. Continued on the following page. 22 R44E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.6,2016 Temperature Sensor and Compensation Chip Type Package Continued from the preceding page. 2.00.05 4.00.1 4.00.1 (a) Packaging Products are packaged in the each cavity of Embossed +0.1 o1.5 -1 2.25* Cover tape has no joints. 3.50.05 tape and sealed by Cover tape. (b) Tape o1.0 +0.3 -0 1.45* Direction of Feed 1.05 0.2 8.00.3 (1) Other Conditions 1.750.1 4. Embossed Tape (NCP21 Series) * Reference Value (in mm) (2) Peeling Force of Cover Tape 165-180 F * 1 Peeling angle: 165 to 180 against the fixed surface of tape. * 2 Peeling speed: 300mm/min. * 3 Peeling force: 0.1 - 0.7N (3) Tape Strength Pull strength of Embossed tape and Cover tape should be specified 10N minimum. 23 R44E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.6,2016 NTC Thermistors Temperature Sensor Thermo String Type This product is a small flexible lead type NTC Thermistor with a small head and a thin lead wire. 1.20.4 1.20.4 25 to 1002 110 to 1503 Features The full length 25mm, 30 to 150mm interval 10mm. (in mm) NXFT15_1B Type (twist) 1.20.4 25 to 1002 110 to 1503 1.20.4 o0.300.05 3+2/-1 Applications 5 o0.300.05 3+2/-1 1. This small and highly accurate NTC Thermistor provides extremely precise temperature sensing. 2. The small sensing head and thin lead wire deliver temperature sensing in a narrow space. 3. Flexibility and a wide variety of lengths (25mm to 150mm) enable the design of flexible temperature sensing architectures. 4. This product is compatible with our 0402 (EIA) size chip Thermistor. 5. Excellent long-term stability 6. This is a halogen free product. * * Cl= max.900ppm, Br=max.900ppm and Cl+Br=max.1500ppm 7. NXFT series are recognized by UL/cUL. (UL1434, File No.E137188). 1. Temperature compensation for transistors, ICs, and crystal oscillators in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits The full length 25mm, 30 to 150mm interval 10mm. (in mm) NXFT15_2B Type (without twist) Detailed are accessable from the following URL. http://www.murata.com/en-global/products/thermistor/ntc/nxf Part Number Resistance B-Constant B-Constant B-Constant B-Constant Operating Current Rated Electric Typical Dissipation Thermal Time (25C) (25-50C) (25-80C) (25-85C) (25-100C) for Sensor (25C) Power (25C) Constant (25C) Constant (ohm) (K) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/C) (25C) (s) NXFT15XH103FApBppp 10k 1% 3380 1% 3428 3434 3455 0.12 7.5 1.5 4 NXFT15XV103FApBppp 10k 1% 3936 1% 3971 3977 3988 0.12 7.5 1.5 4 NXFT15WB473FApBppp 47k 1% 4050 1% 4101 4108 4131 0.06 7.5 1.5 4 NXFT15WF104FApBppp 100k 1% 4250 1% 4303 4311 4334 0.04 7.5 1.5 4 p is filled with lead shape (1: twist, 2: without twist). ppp is filled with Total-length codes. (25mm, 30 to 150mm interval 10mm, ex. 050=50mm) Operating Current for Sensor rises Thermistor's temperature by 0.1C Rated Electric Power shows the required electric power that the thermistor's temperature rise to 30C by self-heating, at ambient temperature of 25 C. Operating Temperature Range: -40C to +125C 24 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Oct.6,2016 Temperature Sensor Thermo String Type Specifications and Test Methods No. Item Specifications 1 High Temperature Storage Test 2 Low Temperature Storage Test 3 Humidity Storage Test 602C, 90 to 95%RH in air, for 1000 +48/-0 hours without loading. 4 Temperature Cycle -40 +0/-3C, 30 minutes in air +252C, 10 to 15 minutes in air +1252C, 30 minutes in air +25 +2/-0C, 10 to 15 minutes in air (1 cycle) Continuous 100 cycles, without loading. 5 High Temperature Load 6 Insulation Break down Voltage * Resistance (R25C) fluctuation rate: less than 1%. * B-Constant (B25/50C) fluctuation rate: less than 1%. * Resistance (R25C) fluctuation rate: less than 2%. * B-Constant (B25/50C) fluctuation rate: less than 1%. Test Methods 1252C in air, for 1000 +48/-0 hours without loading. -40 +0/-3C in air, for 1000 +48/-0 hours without loading. 852C in air, with 'Operating Current for Sensor' for 1000 +48/-0 hrs. * No damage electrical characteristics at DC100 V, 1 min. 2mm length of coating resin from the top of Thermistor is to be dipped into beads of lead (Pb), and DC100V 1 minute is applied to circuit between beads of lead (Pb) and lead wire. Both lead wires are dipped into 35010C solder for 3.50.5 seconds, or 2605C solder for 101 seconds according to Fig-1 (solder <JIS Z 3282 SnAgCu>). 7 Resistance to Soldering Heat * Resistance (R25C) fluctuation rate: less than 1%. * B-Constant (B25/50C) fluctuation rate: less than 1%. 1 to 2mm Solder Fig-1 8 Solderability More than 90% of lead wire surface shall be covered by solder. 5 Both lead wires are dipped into flux (25wt% colophony <JIS K 5902> isopropyl alcohol <JIS K 8839>) for 5 to 10 seconds. Then both lead wires are dipped into 2455C solder <JIS Z 3282 SnAgCu> for 20.5 seconds according to Fig-1. The lead wire shall be inserted in a o1.0mm hole until resin part contacts with a substrate as shown in fig.-2, and 1N force for 10 seconds shall be applied to the lead wire. 9 Lead Wire Pull Strength * Resistance (R25C) fluctuation rate: less than 1%. * B-Constant (B25/50C) fluctuation rate: less than 1%. 1N (10 sec.) Fig-2 Hold the lead wires as in Fig-3. Bend by 90 degrees and again bend back to the initial position. Then bend to the other side by 90 degrees and again bend back to the initial position. After bending process, 10N force for 3 seconds shall be applied to the lead wire. 10 Lead Wire Bending Strength * Lead wire does not break. 10N (3 sec.) Fig-3 * * R25 is zero-power resistance at 25C. * B25/50 is calculated by zero-power resistance of Thermistor in 25C-50C. * After each test, NTC Thermistor should be kept for 1 hour at room temperature (normal humidity and normal atmospheric pressure). Continued on the following page. 25 R44E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.6,2016 Temperature Sensor Thermo String Type Specifications and Test Methods Continued from the preceding page. No. Item Specifications Test Methods NTC Thermistor shall be dropped without any force onto concrete floor from 1 meter height one time. 11 Free Fall NTC Thermistor shall be fixed to the vibration test equipment. Vibration of total 1.5 mm amplitude, Frequency sequence of 10Hz - 55Hz - 10Hz in 1 minute shall be applied for right angled 3 directions for 2 hours duration each. 12 Vibration * Resistance (R25C) fluctuation rate: less than 1%. * B-Constant (B25/50C) fluctuation rate: less than 1%. * No visible damage at resin part. Mount Oscillating Direction Z Solder is attached from the reverse side. Oscillating Direction Y Oscillating Direction X * * R25 is zero-power resistance at 25C. * B25/50 is calculated by zero-power resistance of Thermistor in 25C-50C. * After each test, NTC Thermistor should be kept for 1 hour at room temperature (normal humidity and normal atmospheric pressure). 5 26 R44E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.6,2016 NTC Thermistors Temperature Sensor Lead Type This thermistor is for normal temperature level sensors having self-subsistence due to strong lead strength based on chip NTC. 4.0 max. 2.0 max. 1. This highly accurate NTC Thermistor provides extremely precise temperature sensing. 2. This product is compatible with 1005 (1.0mm x 0.5mm) size NTC Thermistor. 3. The variation per hour of this product is highly stable. 4. This product is produced with an automation line that was consistent from lead to packaging so that a product of uniform quality may be obtained at low cost in large quantities. 5. Since this product has strong lead intensity with original lead mounting technique, it is bent at the time of use and can withstand processing, etc., readily. Taping package can be supported. 10.0 to 40.01.0 Features 2.51 o0.400.05 The full length 10.0 to 40.0mm interval 10.0mm (in mm) Detailed are accessable from the following URL. http://www.murata.com/en-global/products/thermistor/ntc/nxr Applications 1. For temperature detection of a rechargeable battery pack 2. For temperature detection of a charge circuit 3. For temperature detection of a printer head 4. For temperature detection of a DC fan motor 5. For temperature detection of home electronics Part Number NXRT15XM202EA1Bppp Resistance B-Constant B-Constant B-Constant B-Constant Operating Current Rated Electric Typical Dissipation Thermal Time (25C) (25-50C) (25-80C) (25-85C) (25-100C) for Sensor (25C) Power (25C) Constant (25C) Constant (ohm) (K) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/C) (25C) (s) 2k 3% 3500 1.5% 3539 3545 3560 0.27 7.5 1.5 4 NXRT15XV502FA1Bppp 5k 1% 3936 1% 3972 3977 3989 0.17 7.5 1.5 4 NXRT15XH103FA1Bppp 10k 1% 3380 1% 3428 3434 3455 0.12 7.5 1.5 4 NXRT15XV103FA1Bppp 10k 1% 3936 1% 3971 3977 3988 0.12 7.5 1.5 4 NXRT15WB333JA1Bppp 33k 5% 4050 3% 4101 4108 4131 0.07 7.5 1.5 4 NXRT15WB473FA1Bppp 47k 1% 4050 1% 4101 4108 4131 0.06 7.5 1.5 4 NXRT15WF104FA1Bppp 100k 1% 4250 1% 4303 4311 4334 0.04 7.5 1.5 4 6 ppp is filled with Total-length codes. (10 to 40mm interval 10mm, ex. 040=40mm) Operating Current for Sensor rises Thermistor's temperature by 0.1C. Rated Electric Power is necessary electric power that thermistor's temperature rises 5C by self-heating at 25C in still air. Taping type of part numbers with "3A016" is available (Lead Spacing=5mm). Operating Temperature Range: -40C to +125C 27 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Oct.6,2016 Temperature Sensor Lead Type Specifications and Test Methods No. Item Specifications Test Methods 1 Low Temperature Storage Test 2 High Temperature Storage Test 3 High Temperature Load 852C in air, with `Operating Current for Sensor' for 1000 +48/-0 hrs. 4 Humidity Storage Test 602C, 90 to 95%RH in air, for 1000 +48/-0 hours without loading. 5 Temperature Cycle 6 Insulation Break down Voltage * Resistance (R25C) fluctuation rate: less than 1%. * B-Constant (B25/50C) fluctuation rate: less than 1%. * Resistance (R25C) fluctuation rate: less than 2%. * B-Constant (B25/50C) fluctuation rate: less than 1%. * No damage electrical characteristics on D.C.100 V, 1 min. -40 +0/-3C in air, for 1000 +48/-0 hours without loading. 1252C in air, for 1000 +48/-0 hours without loading. -40C +0/-3C, 30 minutes in air +25C2C, 10 to 15 minutes in air +125C +3/-0C, 30 minutes in air +25C +2/-0C, 10 to 15 minutes in air (1 cycle) Continuous 100 cycles, without loading. 2mm length of coating resin from the top of thermistor is to be dipped into beads of lead (Pb), and DC100V 1 minute is applied to circuit between beads of lead (Pb) and lead wire. Both lead wires are dipped into 35010C solder for 3.50.5 seconds, or 2605C solder for 101 seconds according to Fig-1. (solder <Sn-3Ag-0.5Cu>) 7 Resistance to Soldering Heat * Resistance (R25C) fluctuation rate: less than 1%. * B-Constant (B25/50C) fluctuation rate: less than 1%. Solder Fig-1 8 Solderability * More than 90% of lead wire surface shall be covered by solder. Both lead wires are dipped into flux (25wt% colophony <JIS K 5902> isopropyl alcohol <JIS K 8839>) for 5 to 10 seconds. Then both lead wires are dipped into 2455C solder <Sn-3Ag-0.5Cu> for 20.5 seconds according to Fig-1. One end of a lead wire shall be fixed and 2.5N force for 10 seconds shall be applied to the other lead wire as shown in Fig-2. 6 9 Lead Wire Pull Strength * Resistance(R25C) fluctuation rate: less than 1%. * B-Constant(B25/50C) fluctuation rate: less than 1%. * No visible damage at resin part. 2.5N (10sec.) Fig-2 One lead wire is held and 2.5N force is applied. Then the body of NTC thermistor is bent by 90 and again bent back to the initial position. This sequence shall be completed twice. See Fig-3. 10 Lead Wire Bending Strength * Lead wire does not break. 90 2.5N Fig-3 11 Free Fall 12 Vibration * Resistance (R25C) fluctuation rate: less than 1%. * B-Constant (B25/50C) fluctuation rate: less than 1%. * No visible damage at resin part. NTC thermistor shall be dropped without any force onto concrete floor from 1 meter height one time. NTC thermistor shall be fixed to the vibration test Equipment. Vibration of total 1.5mm amplitude, Frequency sequence of 10Hz - 55Hz - 10Hz in 1 minute, shall be applied for right angled 3 directions for 2 hours duration each. * * R25 is zero-power resistance at 25C. * B25/50 is calculated by zero-power resistance of Thermistor in 25C-50C. * After each test, NTC Thermistor should be kept for 1 hour at room temperature (normal humidity and normal atmospheric pressure). 28 R44E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.6,2016 NTC Thermistors Temperature Sensor Lead Insulation Type 4.0 max. (5.0mm) 2.0 max. Features A 2.51.0 1. NXR series can accurately detect temperature with NCP15 series on the head of parts. 2. The insulation coat with polyulethane on the surface of lead wire : 100VDC. 3. You can choose NTC characteristics from NCP15 series. 4. The resistance drift is low in the reliability test. 5. The production capacity is bigger and NXR is produced almost entirely in an automation line. 6. Adopt to Sb regulation B 25.0 to 35.01.0 This thermistor is for normal temperature level sensors having self-subsistence due to strong lead strength based on chip NTC. 0.460.05 The full length 25.0 to 45.0mm interval 5.0mm A: Epoxy Resin B: Copper Lead Wire with Polyurethane Coat (in mm) Detailed are accessable from the following URL. http://www.murata.com/en-global/products/thermistor/ntc/nxr Applications 1. Secondary battery 2. Temperature detection for charging 3. Temperature detection for DC fan motor 4. Temperature sensing for appliance 5. Self-standing temperature sensing for fire detector Part Number Resistance B-Constant B-Constant B-Constant B-Constant Operating Current Rated Electric Typical Dissipation Thermal Time (25C) (25-50C) (25-80C) (25-85C) (25-100C) for Sensor (25C) Power (25C) Constant (25C) Constant (ohm) (K) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/C) (25C) (s) NXRT15XM202EA5Bppp 2k 3% 3500 1.5% 3539 3545 3560 0.36 13 2.6 4 NXRT15XV502FA5Bppp 5k 1% 3936 1% 3972 3977 3989 0.22 13 2.6 4 NXRT15XH103FA5Bppp 10k 1% 3380 1% 3428 3434 3455 0.16 13 2.6 4 NXRT15XV103FA5Bppp 10k 1% 3936 1% 3971 3977 3988 0.16 13 2.6 4 NXRT15WB333JA5Bppp 33k 5% 4050 3% 4101 4108 4131 0.08 13 2.6 4 NXRT15WB473FA5Bppp 47k 1% 4050 1% 4101 4108 4131 0.07 13 2.6 4 NXRT15WF104FA5Bppp 100k 1% 4250 1% 4303 4311 4334 0.05 13 2.6 4 ppp is fulled with Total-length codes. (25 to 35mm interval 5mm, ex. 030=30mm) Operating Current for Sensor rises Thermistor's temperature by 0.1C. Rated Electric Power is necessary electric power that thermistor's temperature rises 5C by self-heating at 25C in still air. Operating Temperature Range: -40C to +125C 7 29 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Oct.6,2016 Temperature Sensor Lead Insulation Type Specifications and Test Methods No. Item Specifications Test Methods Both lead wires are dipped into 35010C solder for 3.50.5 seconds, or 260 5C solder for 101 seconds according to Fig-1. (solder <SnAgCu>) 1 Resistance to Soldering Heat (Flow) * Resistance (R25C) fluctuation rate: less than 1%. * B-Constant (B25/50C) fluctuation rate: less than 1%. Solder 1 to 2mm Fig-1 2 Solderability (Flow) * More than 90% of lead wsire surface shall be covered by solder. Both lead wires are dipped into flux (25wt% colophony <JIS K 5902> isopropyl alcohol <JIS K 8839>) for 5 to 10 seconds. Then both lead wire are dipped into 2455C solder <SnAgCu> for 20.5 seconds according to Fig-1. One end of a lead wire shall be fixed and 2.5N force for 10 seconds shall be applied to the other lead wire as shown in Fig-2. 3 Lead Wire Breaking Strength * Resistance (R25C) fluctuation rate: less than 1%. * B-Constant (B25/50C) fluctuation rate: less than 1%. 2.5N (10sec.) Fig-2 One lead wire is held and 2.5N force is applied. Then the body of NTC thermistor is bent by 90 and again bent back to the initial position. This sequence shall be completed twice. See Fig-3. 4 Lead Wire Bending Strength * Lead wire does not break. 90 2.5N Fig-3 5 Free Fall * Resistance (R25C) fluctuation rate: less than 1%. * B-Constant (B25/50C) fluctuation rate: less than 1%. * No visible damage at resin part. NTC thermistor shall be fixed to the vibration test equipment. Vibration of total 1.5 mm amplitude, frequency sequence of 10Hz - 55Hz - 10Hz in 1 minute, shall be applied for right angled 3 directions for 2 hours duration each. 6 Vibration 7 Cold 8 Dry Heat 1252C in air, for 1000 +48/-0 hours without loading. 9 High Temperature with Continuous Load 852C in air, with `Operating Current for Sensor' for 1000 +48/-0 hrs. 7 10 Damp Heat * Resistance (R25C) fluctuation rate: less than 1%. * B-Constant (B25/50C) fluctuation rate: less than 1%. * Resistance (R25C) fluctuation rate: less than 2%. * B-Constant (B25/50C) fluctuation rate: less than 1%. Change of 11 Temperature Dielectric 12 Breakdown Voltage 30 NTC thermistor shall be dropped without any force onto concrete floor from 1 meter height one time. * No damage electrical characteristics on D.C.100V, 1 min. -40 +0/-3C in air, for 1000 +48/-0 hours without loading. 602C, 90 to 95%RH in air, for 1000 +48/-0 hours without loading. -40C +0/-3C, 30 minutes in air +25C2C, 10 to 15 minutes in air +125C +3/-0C, 30 minutes in air +25C +2/-0C, 10 to 15 minutes in air (1 cycle) Continuous 100 +4/-0 cycles, without loading. 2mm length of coating resin from the top of thermistor is to be dipped into beads of lead (Pb), and DC100V 1 minute is applied to circuit between beads of lead (Pb) and lead wire. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Oct.6,2016 Temperature Sensor Thermo String/Lead Type Temperature Characteristics (Center Value) Part Number NXFT15XH103 NXFT15XV103 NXFT15WB473 NXFT15WF104 Resistance 10k 10k 100k 47k B-Constant 3380K 4250K 3936K 4050K Temp. (C) Resistance (k) Resistance (k) Resistance (k) Resistance (k) -40 197.388 4221.280 337.503 1690.590 -35 149.395 2995.040 243.332 1215.320 -30 114.345 2147.000 177.496 882.908 -25 88.381 1554.600 130.859 647.911 -20 68.915 1136.690 97.428 480.069 -15 54.166 839.019 73.230 359.009 -10 42.889 624.987 55.529 270.868 -5 34.196 469.678 42.467 206.113 0 27.445 355.975 32.747 158.126 5 22.165 272.011 25.450 122.267 10 18.010 209.489 19.932 95.256 15 14.720 162.559 15.727 74.754 20 12.099 127.057 12.498 59.075 25 10.000 100.000 10.000 47.000 30 8.309 79.222 8.054 37.636 35 6.939 63.167 6.529 30.326 40 5.824 50.677 5.324 24.583 45 4.911 40.904 4.366 20.043 50 4.160 33.195 3.601 16.433 55 3.539 27.091 2.985 13.545 60 3.024 22.224 2.488 11.223 65 2.593 18.323 2.083 9.345 70 2.233 15.184 1.752 7.818 75 1.929 12.635 1.480 6.571 80 1.673 10.566 1.256 5.548 85 1.455 8.873 1.070 4.704 90 1.270 7.481 0.916 4.004 95 1.112 6.337 0.787 3.422 100 0.976 5.384 0.679 2.936 105 0.860 4.594 0.588 2.528 110 0.759 3.934 0.512 2.184 115 0.673 3.380 0.446 1.893 120 0.598 2.916 0.391 1.646 125 0.532 2.522 0.343 1.436 Part Number NXRT15XM202 NXRT15XV502 NXRT15XH103 NXRT15XV103 NXRT15WB333 NXRT15WB473 NXRT15WF104 2.0k Resistance 10k 10k 5.0k 100k 33k 47k 3500K B-Constant 3380K 3936K 3936K 4250K 4050K 4050K Temp. (C) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) Resistance (k) -40 44.981 195.652 337.503 168.752 4397.119 1227.263 1747.920 -35 33.671 148.171 243.332 121.666 3088.599 874.449 1245.428 -30 25.444 113.347 177.496 88.748 2197.225 630.851 898.485 -25 19.417 87.559 130.859 65.430 1581.881 460.457 655.802 -20 14.955 68.237 97.428 48.714 1151.037 339.797 483.954 -15 11.619 53.650 73.230 36.615 846.579 253.363 360.850 -10 9.097 42.506 55.529 27.764 628.988 190.766 271.697 -5 7.178 33.892 42.467 21.233 471.632 144.964 206.463 0 5.707 27.219 32.747 16.374 357.012 111.087 158.214 5 4.568 22.021 25.450 12.725 272.500 85.842 122.259 10 3.682 17.926 19.932 9.966 209.710 66.861 95.227 15 2.986 14.674 15.727 7.864 162.651 52.470 74.730 20 2.437 12.081 12.498 6.249 127.080 41.471 59.065 25 2.000 10.000 10.000 5.000 100.000 33.000 47.000 30 1.651 8.315 8.054 4.027 79.222 26.430 37.643 35 1.370 6.948 6.529 3.264 63.167 21.298 30.334 40 1.143 5.834 5.324 2.662 50.677 17.266 24.591 45 0.958 4.917 4.366 2.183 40.904 14.076 20.048 50 0.807 4.161 3.601 1.801 33.195 11.538 16.433 55 0.682 3.535 2.985 1.493 27.091 9.506 13.539 60 0.580 3.014 2.488 1.244 22.224 7.870 11.209 65 0.495 2.586 2.083 1.041 18.323 6.549 9.328 70 0.424 2.228 1.752 0.876 15.184 5.475 7.798 75 0.365 1.925 1.480 0.740 12.635 4.595 6.544 80 0.315 1.669 1.256 0.628 10.566 3.874 5.518 85 0.273 1.452 1.070 0.535 8.873 3.282 4.674 90 0.237 1.268 0.916 0.458 7.481 2.789 3.972 95 0.207 1.110 0.787 0.394 6.337 2.379 3.388 100 0.181 0.974 0.679 0.340 5.384 2.038 2.902 105 0.160 0.858 0.588 0.294 4.594 1.751 2.494 110 0.141 0.758 0.512 0.256 3.934 1.509 2.150 115 0.124 0.672 0.446 0.223 3.380 1.306 1.860 120 0.110 0.596 0.391 0.195 2.916 1.134 1.615 125 0.098 0.531 0.343 0.172 2.522 0.987 1.406 31 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Sensor Thermo String/Lead Type !Caution/Notice !Caution (Storage and Operating Conditions) This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because all of these factors can deteriorate the product characteristics or cause failures and burn-out. 1. Corrosive gas or deoxidizing gas (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) 2. Volatile or flammable gas 3. Dusty conditions 4. Under vacuum, or under high or low pressure 5. Wet or humid locations 6. Places with salt water, oils, chemical liquids or organic solvents 7. Strong vibrations 8. Other places where similar hazardous conditions exist !Caution (Others) Be sure to provide an appropriate fail-safe function on your product to prevent secondary damage that may be caused by the abnormal function or the failure of our product. Notice (Storage and Operating Conditions) To keep the solderability of the product from degrading, the following storage condition is recommended. 1. Storage condition: Temperature -10 to +40C Humidity less than 75%RH (not dewing condition) 2. Storage term: Use this product within 6 months after delivery by first-in and first-out stocking system. 3. Handling after unpacking: After unpacking, reseal product promptly or store it in a sealed container with a drying agent. 4. Storage place: Do not store this product in corrosive gas (Sulfuric acid gas, Chlorine gas, etc.) or in direct sunlight. Notice (Rating) Use this product within the specified temperature range. Higher temperature may cause deterioration of the characteristics or the material quality of this product. Notice (Soldering and Mounting) NXF Series Please note as shown below when you mount this product. 1. Do not melt the solder in the resin head when you solder this product. If you do so, there is a possibility of wire breakage, electric short mode failure and wire coating breakage. If you cut the lead wire of this product less than 20mm from the resin head, the heat of the melted solder at the lead wire edge is propagated easily to the resin head along the lead wire. 2. Do not touch the resin head directly with the soldering iron. It may cause the melting of solder in the resin head. 3. Do not separate the parallel lead wires 10mm or less from the resin. 4. If you mold this product with resin, please evaluate the quality of this product before you use it. 5. Do not bend the lead wire radius 1mm or more. Continued on the following page. 32 R44E.pdf Oct.6,2016 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Oct.6,2016 Temperature Sensor Thermo String/Lead Type !Caution/Notice Continued from the preceding page. Notice (Soldering and Mounting) NXR Series Please note as shown below when you mount this product. 1. Do not melt the solder in the resin head, when you solder this product. If you melt the solder in resin the head, the wire could break and short. If you cut the lead wire of this product less than 8mm from the resin head, the heat of the melted solder at the lead wire edge is propagated easily to the resin head along the lead wire. Please do not cut this product below 9mm. 2. Do not touch the resin head directly with the solder iron. It may cause the melting of solder in the resin head. 3. If you mold this product with resin, please evaluate the quality of this product before you use it. Notice (Soldering and Mounting) NXR Series (Insulation Type) Please note as shown below when you mount this product. 1. Do not melt the solder in the resin head when you solder this product. (more than 25mm in full length of the product). If you melt the solder in the resin head, it has posibility that the wire could break and short. 2. Do not touch the resin head directly with the solder iron. It may cause the melting of solder in the resin head. 3. When additonal processing is carried out on this product (such as bonding, resin molding, and resin coating, etc.), please perform an audit of quality level on an automated machine and only use the product after confirming its reliability. Please talk to us if you have concern matter, like process it under the high temperature and the high pressure. (For example, exposed to high-temperature and high-pressure environment as mold sealing with injection molding.) Notice (Handling) NXF/NXR Series 1. The ceramic element of this product is fragile, and care must be taken not to load an excessive press-force or not to cause a shock at handling. Such forces may cause cracking or chipping. 2. Do not apply excessive force to the lead. Otherwise, it may cause the junction between lead and element to break or crack. Holding the element by the side lead wire is recommended when lead wire is bent or cut. Notice (Handling) NXR Series (Insulation Type) 1. The ceramic element of this product is fragile, and care must be taken not to load an excessive press-force or not to cause a shock at handling. Such forces may cause cracking or chipping. Especially under high-temperature environment, there is a possibility that epoxy resin will become soft. When you set up the processing environment, please examine the processing method after evaluating the quality of this product. 2. Do not apply excessive force to the lead. Otherwise, it may cause the junction between lead and element to break or crack. Holding the element by the side lead wire is recommended when lead wire is bent or cut. Handle the lead with care; there is a possibility that a crack may go into the polyurethane insulated coat when bending the lead. 33 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Sensor Thermo String/Lead Type Package Minimum Order Quantity Bulk Ammo Pack Taping Minimum Quantity (pcs.) Part Number NXF 1000 - - NXR 500 NXRT_3A016 2500 Part Number Minimum Quantity (pcs.) Taping Dimensions (NXRT_3A016 Series) h1 P2 P h2 T S H3 D od Item Code Dimensions (mm) Pitch of Component P 12.71.0 Pitch of Sprocket Hole P0 12.70.3 Lead Spacing F 5.01.0 Length from Hole Center to Component Center P2 6.351.3 Length from Hole Center to Lead P1 3.850.7 Body Diameter D 4.0 max. Deviation Along Tape, Left or Right S 02.0 Carrier Tape Width W3 18.00.5 Position of Sprocket Hole W1 9.00.5 Lead Distance between Reference and Bottom Planes H0 16.01.0 Height of Component H3 7.51.0 I +0.5 to -1.0 oD0 4.00.1 Lead Diameter od 0.400.05 Total Tape Thickness t1 0.60.3 Total Thickness, Tape and Lead Wire t2 1.6 max. Protrusion Length Diameter of Sprocket Hole Deviation Across Tape h1, h2 1.0 max. Portion to Cut in Case of Defect L3 11.0 +0 -2.0 Hold down Tape Width W0 9.5 min. Hold down Tape Position W2 1.51.5 T 2.0 max. Thickness 34 oD0 t1 P0 t2 I W3 W0 W1 L3 H0 W2 F P1 R44E.pdf Oct.6,2016 R44E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.6,2016 NTC Thermistors Inrush Current Suppression Lead Type NTPAN : 23.0 max. NTPAJ : 20.0 max. 5.5 max. 10.0 max. This product effectively supresses surge currents that are generated when switching power regulators are turned on. Features Coating Extension on Lead : to line A A 3.51.0 1. Lead is not contained in the ceramic element, the terminations, the solder for inner connection and the coating resin. 2. Most suitable for power supplies of less than 100W 3. Excellent recovery characteristics due to resin coating with excellent heat characteristics 4. Highly reliable NTPAN/NTPAJ Series o0.80.05 Sn plated Cu wire 10.01.5 (in mm) NTPAD : 16.0 max. NTPAA : 12.0 max. Applications 10.0 max. 1. Switching power supplies 2. CRT monitors 3. Color televisions 4. VCR power supplies 5. Other power circuits 5.5 max. 5.0 max. Coating Extension on Lead : to line A 3.51.0 A NTPAD/NTPAA Series o0.80.05 Sn plated Cu wire 7.51.5 (in mm) 5.0 max. 6.0 max. NTPA9: 11.0 max. NTPA7: 9.0 max. NTPA5: 6.0 max. A 3.51.0 Coating Extension on Lead: to line A NTPA5/NTPA7/NTPA9 Series o0.60.05 Sn plated Cu wire 5.01.5 (in mm) Detailed are accessable from the following URL. http://www.murata.com/en-global/products/thermistor/ntc/ntp Resistance (25C) (ohm) Permissible Max. Current (25C) (A) Permissible Max. Current (55C) (A) Thermal Time Constant (25C) (s) Thermal Dissipation Constant (25C) (mW/C) NTPAN3R0LDKB0 3.0 15% 5.4 4.7 135 26.8 NTPAN4R0LDKB0 4.0 15% 4.7 4.1 130 26.8 NTPAN6R0LDKB0 6.0 15% 3.9 3.4 130 26.8 NTPAJ4R0LDKB0 4.0 15% 4.0 3.5 125 21.8 NTPAJ6R0LDKB0 6.0 15% 3.4 2.9 125 21.8 NTPAJ8R0LDKB0 8.0 15% 3.0 2.6 130 21.8 NTPAJ100LDKB0 10.0 15% 2.6 2.2 130 Part Number 8 21.8 Continued on the following page. 35 R44E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.6,2016 Continued from the preceding page. Resistance (25C) (ohm) Permissible Max. Current (25C) (A) Permissible Max. Current (55C) (A) Thermal Time Constant (25C) (s) Thermal Dissipation Constant (25C) (mW/C) NTPAD3R9LDNB0 3.9 15% 3.3 2.9 65 18.2 NTPAD5R1LDNB0 5.1 15% 3.0 2.6 85 18.8 NTPAD8R0LDNB0 8.0 15% 2.7 2.3 65 18.7 NTPAD160LDNB0 16.0 15% 2.0 1.7 100 19.1 NTPAA2R2LDNB0 2.2 15% 3.7 3.2 70 13.5 Part Number NTPAA3R9LDNB0 3.9 15% 2.7 2.3 70 13.5 NTPAA5R1LDNB0 5.1 15% 2.5 2.2 70 13.5 NTPAA8R2LDNB0 8.2 15% 2.0 1.7 70 13.5 NTPAA100LDNB0 10.0 15% 1.7 1.5 70 13.5 NTPA9160LBMB0 16.0 15% 1.4 1.2 65 11.6 NTPA74R0LBMB0 4.0 15% 2.3 2.0 40 9.4 NTPA75R0LBMB0 5.0 15% 1.9 1.6 40 9.4 NTPA78R0LBMB0 8.0 15% 1.7 1.5 40 9.5 NTPA7100LBMB0 10.0 15% 1.4 1.2 40 9.5 NTPA7160LBMB0 16.0 15% 1.2 1.0 40 9.9 NTPA7220LBMB0 22.0 15% 1.0 0.88 40 9.1 NTPA55R0LBMB0 5.0 15% 1.7 1.5 20 5.6 NTPA5100LBMB0 10.0 15% 1.2 1.1 20 5.6 NTPAD/NTPAA/NTPA9/NTPA7 series are also available on tape. The final alphabet of the part number should be "DNB0=>D6A0", "BNB0 =>B1A0". Operating Temperature Range: -20C to +160C Permissible Electrolytic Capacitor Voltage (AC) 100Vrms 120Vrms 132Vrms 220Vrms 240Vrms 264Vrms NTPAN 8600F 5972F 4936F 1777F 1493F 1234F NTPAJ 5000F 3472F 2870F 1033F 868F 717F NTPAD 2700F 1875F 1550F 558F 469F 387F NTPAA 1400F 972F 803F 289F 243F 201F NTPA9 800F 556F 459F 165F 139F 115F 700F 486F 402F 145F 122F 100F 570F 396F 327F 118F 99F 82F 400F 278F 230F 83F 69F 57F 346F 240F 198F 71F 60F 50F Part Number NTPA74R0 NTPA75R0 NTPA78R0 NTPA7100 NTPA7160 NTPA7220 NTPA5 Application Circuit Determination of Allowable Current 1.0 -t + 8 - Max. Current Ratio NTC 0.5 0 36 20 40 60 80 100 120 Ambient Temperature (C) 140 160 R44E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.6,2016 Current-R Ratio (RT/R25)/Current-Temperature Characteristics (Typical) NTPAN4R0L Type Resistance Ratio Thermistor's Temperature (C) 1 100 0.1 0.1 1 10 1 Resistance Ratio Thermistor's Temperature (C) 1 100 0.1 0.01 0.01 10 0.1 Current (A) NTPAJ4R0L Type 100 1 10 0.1 0.1 1 10 1 Resistance Ratio Thermistor's Temperature (C) 100 1 10 0.1 0.01 0.01 0.1 Current (A) NTPAJ8R0L Type 100 1 0.1 10 0.1 1 10 1 1000 Resistance Ratio Thermistor's Temperature (C) 100 1 0.1 0.01 0.01 10 0.1 Current (A) Thermistor's Temperature (C) Resistance Ratio Thermistor's Temperature (C) Ta=25C 10 Resistance Ratio (Rt/R25) Resistance Ratio (Rt/R25) 1000 Thermistor's Temperature (C) Ta=25C 10 1 10 1 Current (A) NTPAJ100L Type NTPAD3R9L Type 1000 1 100 0.1 10 0.1 1 Current (A) 1 10 Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (C) Ta=25C 10 Thermistor's Temperature (C) Ta=25C 10 Resistance Ratio (Rt/R25) 1 10 1 Current (A) NTPAJ6R0L Type 0.01 0.01 1000 Thermistor's Temperature (C) Resistance Ratio Thermistor's Temperature (C) Ta=25C 10 Resistance Ratio (Rt/R25) Resistance Ratio (Rt/R25) 1000 Thermistor's Temperature (C) Ta=25C 10 0.01 0.01 1 10 1 Current (A) NTPAN6R0L Type 0.01 0.01 1000 1000 Resistance Ratio Thermistor's Temperature (C) 1 100 0.1 0.01 0.01 10 0.1 1 Thermistor's Temperature (C) 0.01 0.01 10 Ta=25C 10 Resistance Ratio (Rt/R25) Resistance Ratio (Rt/R25) 1000 Thermistor's Temperature (C) Ta=25C 10 Thermistor's Temperature (C) NTPAN3R0L Type 8 1 10 Current (A) Continued on the following page. 37 R44E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.6,2016 Current-R Ratio (RT/R25)/Current-Temperature Characteristics (Typical) Continued from the preceding page. NTPAD8R0L Type Resistance Ratio Thermistor's Temperature (C) 1 100 0.1 0.1 1 10 1 Resistance Ratio Thermistor's Temperature (C) 1 100 0.1 0.01 0.01 10 0.1 Current (A) NTPAA2R2L Type 100 1 10 0.1 0.1 1 10 1 Resistance Ratio Thermistor's Temperature (C) 100 1 10 0.1 0.01 0.01 0.1 Current (A) NTPAA5R1L Type 100 1 0.1 10 0.1 1 10 1 100 1 0.1 0.01 0.01 10 0.1 Current (A) NTPAA100L Type 1000 1 100 0.1 10 0.1 1 Current (A) 1 10 Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (C) Ta=25C 10 Thermistor's Temperature (C) Ta=25C 10 Resistance Ratio (Rt/R25) 1 10 1 Current (A) NTPAA8R2L Type 38 1000 Resistance Ratio Thermistor's Temperature (C) Thermistor's Temperature (C) Resistance Ratio Thermistor's Temperature (C) Ta=25C 10 Resistance Ratio (Rt/R25) Resistance Ratio (Rt/R25) 1000 Thermistor's Temperature (C) Ta=25C 10 0.01 0.01 1 10 1 Current (A) NTPAA3R9L Type 8 1000 Thermistor's Temperature (C) Resistance Ratio Thermistor's Temperature (C) Ta=25C 10 Resistance Ratio (Rt/R25) Resistance Ratio (Rt/R25) 1000 Thermistor's Temperature (C) Ta=25C 10 0.01 0.01 1 10 1 Current (A) NTPAD160L Type 0.01 0.01 1000 1000 Resistance Ratio Thermistor's Temperature (C) 1 100 0.1 0.01 0.01 10 0.1 1 Thermistor's Temperature (C) 0.01 0.01 10 Ta=25C 10 Resistance Ratio (Rt/R25) Resistance Ratio (Rt/R25) 1000 Thermistor's Temperature (C) Ta=25C 10 Thermistor's Temperature (C) NTPAD5R1L Type 1 10 Current (A) Continued on the following page. R44E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.6,2016 Current-R Ratio (RT/R25)/Current-Temperature Characteristics (Typical) Continued from the preceding page. NTPA74R0L Type 1 100 0.1 0.1 Resistance Ratio Thermistor's Temperature (C) 1 100 0.1 0.01 0.01 1 10 1 10 0.1 NTPA78R0L Type 1 100 0.1 10 0.1 100 1 10 0.1 0.1 Current (A) NTPA7160L Type 100 0.1 10 0.1 100 1 0.1 0.01 0.01 1 10 1 1000 Resistance Ratio Thermistor's Temperature (C) 10 0.1 Current (A) Thermistor's Temperature (C) 1 Resistance Ratio (Rt/R25) Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (C) Ta=25C 10 1000 Thermistor's Temperature (C) Ta=25C 10 1 10 1 Current (A) NTPA7220L Type NTPA55R0L Type 1000 1 100 0.1 10 0.1 1 Current (A) 1 10 Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (C) Ta=25C 10 Thermistor's Temperature (C) Ta=25C 10 Resistance Ratio (Rt/R25) 1 10 1 Current (A) NTPA7100L Type 0.01 0.01 1000 Resistance Ratio Thermistor's Temperature (C) 0.01 0.01 1 10 1 Resistance Ratio (Rt/R25) Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (C) Ta=25C 10 1000 Thermistor's Temperature (C) Ta=25C 10 Thermistor's Temperature (C) NTPA75R0L Type 0.01 0.01 1 10 1 Current (A) Current (A) 0.01 0.01 1000 1000 Resistance Ratio Thermistor's Temperature (C) 1 100 0.1 0.01 0.01 10 0.1 1 Thermistor's Temperature (C) 0.01 0.01 10 Resistance Ratio (Rt/R25) Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (C) Ta=25C 10 1000 Thermistor's Temperature (C) Ta=25C 10 Thermistor's Temperature (C) NTPA9160L Type 8 1 10 Current (A) Continued on the following page. 39 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Current-R Ratio (RT/R25)/Current-Temperature Characteristics (Typical) Continued from the preceding page. NTPA5100L Type Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (C) 1 100 0.1 0.01 0.01 10 0.1 1 Current (A) 8 40 1000 1 10 Thermistor's Temperature (C) Ta=25C 10 R44E.pdf Oct.6,2016 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Oct.6,2016 Inrush Current Suppression Lead Type !Caution/Notice !Caution (Storage and Operating Conditions) 1. This product is designed for Switching Power Supplies with smoothing capacitors. Other applications of this product may result in fire. 2. Use this product within the specified maximum current. Otherwise it may catch fire in the worst case. 3. Use this product with smoothing capacitors within the specified maximum capacitance value. Otherwise it may catch fire in the worst case. 4. This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because all these factors can deteriorate the product characteristics cause failure and burn-out. (1) Corrosive gas or deoxidizing gas. (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) Volatile or flammable gas (3) Dusty conditions (4) Under high or low pressure (5) Wet or humid conditions (6) Near with salt water, oils, chemical liquids or organic solvents (7) Strong vibrations (8) Other places where similar hazardous conditions exist. !Caution (Others) Be sure to provide an appropriate fail-safe function on your product to prevent secondary damage that may be caused by the abnormal function or the failure of our product. Notice (Storage and Operating Conditions) To keep the solderability of the product from degrading, the following storage condition is recommended. 1. Storage condition: Temperature -10 to +40C Humidity less than 75%RH (not dewing condition) 2. Storage term: Use this product within 6 months after delivery by first-in and first-out stocking system. 3. Handling after unpacking: After unpacking, reseal product promptly or store it in a sealed container with a drying agent. 4. Storage place: Do not store this product in corrosive gas (Sulfuric acid gas, Chlorine gas, etc.) or in direct sunlight. Notice (Rating) Use this product within the specified temperature range. Higher temperature may cause deterioration of the characteristics or the material quality of this product. Notice (Soldering and Mounting) 1. Be sure that the preheat-up does not melt the soldering of this product. Excessive heat may cause failure to open, short or insulation break down. 2. Do not touch the body with the soldering iron. The soldering point should be min. 5mm away from the root of the lead wire. 8 41 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Inrush Current Suppression Lead Type !Caution/Notice Notice (Handling) 1. When this product is operated, the temperature of some areas may be about 160C. Use proper surrounding parts and material that withstand such temperature. If they are inadequate and kept at high temperature for a long time, they may be deteriorated or may produce harmful gas. Such harmful gas may deteriorate the element of this product. 2. This product does not have waterproof construction. Splashed water may cause failure mode such as deterioration of characteristics or current leak. Therefore, do not apply clean by immersing it into water or any solvent. Notice (Others) 1. This product may allow the passing of higher current than its initial value if it receives inrush current again before it cools down enough to recover its original resistance. Be sure to consider the highest current under actual operating conditions operating temperature. 2. The resin coating of this product does not guarantee insulating. Keep an adequate insulating distance from surrounding parts. 8 42 3. The ceramic element of this product is fragile, and care must be taken not to load an excessive press-force or not to cause a shock at handling. Such forces may cause cracking or chipping to the element. 4. Do not apply excessive force to the lead wire. Otherwise, it may cause the junction between lead wire and element to break or crack, or may crack the element. Therefore, fix the lead wire of the element side when the lead wire is bent or cut. R44E.pdf Oct.6,2016 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Oct.6,2016 Inrush Current Suppression Lead Type Package Minimum Order Quantity Bulk Ammo Pack Taping Part Number Minimum Quantity (pcs.) Part Number Minimum Quantity (pcs.) NTPAN_DKB0 50 - - NTPAJ_DKB0 100 - - NTPAD_DNB0 150 NTPAD_D6A0 400 NTPAA_DNB0 300 NTPAA_D6A0 750 NTPA9_BMB0 300 NTPA9_B1A0 1000 NTPA7_BMB0 500 NTPA7_B1A0 1000 NTPA5_BMB0 500 NTPA5_B1A0 1500 Taping Dimensions (NTPAD/A_D6A0 Series) S P P2 h1 D h2 e H2 T F d W W1 t1 t2 0 Item oD P0 l W0 L H0 P1 W2 A Code Dimensions (mm) Pitch of Component P 30.0 Pitch of Sprocket Hole P0 15.00.3 Lead Spacing F 7.50.5 Length from Hole Center to Component Center P2 7.51.5 Length from Hole Center to Lead P1 3.751.0 Body Diameter D (refer to the table below) T (refer to the table below) Body Thickness Deviation Along Tape, Left or Right S 2.0 Carrier Tape Width W 18.00.5 Position of Sprocket Hole W1 9.00.5 Lead Distance between Reference and Bottom Plane H0 16.00.5 Height of Component H2 10.0 max. I +0.5 to -6.0 Protrusion Length Diameter of Sprocket Hole D0 4.00.1 Lead Diameter d 0.80.05 Total Tape Thickness t1 0.60.3 Total Thickness, Tape and Lead Wire t2 2.0 max. Deviation Across Tape h1, h2 Portion to Cut in Case of Defect L 2.0 max. 11.0+0 -2.0 Hold down Tape Width W0 11.5 min. Hold down Tape Position W2 4.0 max. e to line A Coating Extension on Lead D (mm) T (mm) NTPAD Type 16.0 max. 5.5 max. NTPAA 12.0 max. 5.0 max. 8 Continued on the following page. 43 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Inrush Current Suppression Lead Type Package Continued from the preceding page. Taping Dimensions (NTPA9/7/5_B1A0 Series) P P2 S h1 h2 D e H2 T d W2 Item t1 Dimensions (mm) P 12.7 Pitch of Sprocket Hole P0 12.70.3 Lead Spacing F 5.0 +0.8 -0.3 Length from Hole Center to Component Center P2 6.351.3 Length from Hole Center to Lead P1 3.850.8 Body Diameter D (refer to the table below) Body Thickness T 5.0 max. S 1.5 Carrier Tape Width W 18.00.5 Position of Sprocket Hole W1 9.0 +0.5 -0.75 Lead Distance between Reference and Bottom Planes H0 16.01.0 Height of Component H2 6.0 max. I +0.5 to -4.0 D0 4.00.3 Lead Diameter d 0.60.05 Total Tape Thickness t1 0.60.3 Total Thickness, Tape and Lead Wire t2 2.0 max. Protrusion Length Diameter of Sprocket Hole Deviation Across Tape h1, h2 Portion to Cut in Case of Defect L 1.5 max. 11.0 +0 -2.0 Hold down Tape Width W0 11.0 min. Hold down Tape Position W2 4.0 max. e to line A Coating Extension on Lead Type 44 Code Pitch of Component Deviation Along Tape, Left or Right 8 t2 P0 W W0 L W1 H0 F 0 oD P1 l A D (mm) NTPA9 11.0 max. NTPA7 9.0 max. NTPA5 6.0 max. R44E.pdf Oct.6,2016 R44E.pdf Oct.6,2016 Cat. No. R44E-17 Global Locations For details please visit www.murata.com Note 1 Export Control For customers outside Japan: No Murata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or otherwise contribution to (1) any weapons (Weapons of Mass Destruction [nuclear, chemical or biological weapons or missiles] or conventional weapons) or (2) goods or systems specially designed or intended for military end-use or utilization by military end-users. For customers in Japan: For products which are controlled items subject to the "Foreign Exchange and Foreign Trade Law" of Japan, the export license specified by the law is required for export. 2 Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage a third party's life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. 1 Aircraft equipment 2 Aerospace equipment 3 Undersea equipment 4 Power plant equipment 5 Medical equipment 6 Transportation equipment (vehicles, trains, ships, etc.) 7 Traffic signal equipment 8 Disaster prevention / crime prevention equipment 9 Data-processing equipment 10 Application of similar complexity and/or reliability requirements to the applications listed above Murata Manufacturing Co., Ltd. www.murata.com 3 Product specifications in this catalog are as of August 2016. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4 Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5 This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6 Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7 No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.