Plugs & Receptacles
PowerGard®
universal receptacles
& back boxes
Now cULus listed for use in Canada
Whether you are powering lighting fixtures or portable
equipment, you need a receptacle solution that stands up
to the harsh environmental and physical demands of
land-based drilling applications.
PowerGard® receptacles and back boxes meet and exceed
your power needs with an easy-install, universal footprint
suitable for rig maintenance, retrofits and new builds.
Receptacles engineered for real world
applications and challenging environments
Designed
for work
2EATON'S CROUSE-HINDS PowerGard® universal receptacles & back boxes
Universal receptacles & back boxes for land-based drilling
Introducing PowerGard®
Primary application
PowerGard® receptacles are
used to supply power to lighting
systems and lighting panels on
land-based drilling rigs.
Industry-best ease of
installation
• Classified for use with
Appleton® U-Line Series
• Easy-to-wire saddle clamp
terminals reduce installation
time and effort
• Molded-in-place phase/ground
markings reduce installation
errors
Best-in-class reliability
• Can handle temperature
extremes ranging from -50°C
to +55°C where comparable
products are not certified to
operate
• Epoxy powder coat finish,
integral gasket design and
stainless steel hardware
ensure suitability for NEMA
3RX applications
• Vibration tested at 1G to
ensure continuity in high
vibration areas
• Rugged Krydon® faceplate
stands up to abuse in the
field without cracking
Increased ease of operation
• Positive on-off position
identifies when unit has been
engaged and disengaged
• Clearly marked operating
instructions to eliminate risk
of improper operation
EXCLUSIVE FEATURES
• Extended temperature
range: -50°C to +55°C
• Certified for use wih Hard
Service Cords SOOW,
SEOOW and STOOW
• Saddle clamp wire
terminals
• NEMA 3RX rating
• Krydon® fiberglass-
reinforced polyester
faceplate
3
EATON'S CROUSE-HINDS PowerGard® universal receptacles & back boxes
Specifications & features
Electrical ratings
• 15 Amp, 125 VAC
• 20 Amp, 125 VAC
• 20 Amp, 250 VAC
Environmental ratings
• NEMA 3, 3R, 3RX
Ambient temperature ratings
• ULus, Group C, D
-50°C to +55°C
• cUL, Group C, D
-50°C to +40°C
• ULus, Group B, C, D
-25°C to +55°C
• cUL, Group B, C, D
-25°C to +40°C
Certifications and compliances
• NEC & CEC
- Class I, Groups B*, C, D
- Class II, Groups F, G
- Class III
* Group B certification not
applicable to double gang
assemblies. Reference page 6
for full details.
• UL Standards
- UL 1203 Explosionproof
and Dust-Ignition-proof
Electrical Equipment for
Use in Hazardous
(Classified) Locations
• CSA Standard
- CSA 22.2 No. 30
Explosionproof Enclosures
for Use in Class I
Hazardous Locations
- CSA 22.2 No. 159
Attachment plugs,
Receptacles, and similar
Wiring Devices for Use in
Hazardous Locations:
Class I, Groups A,B,C,D;
Class II Group G, in Coal or
Coke Dust, and in Gaseous
Mines.
• cULus File #10289
Standard materials
• Housing, covers and back
boxes: Copper-free aluminum
with Corro-free™ epoxy
powder coat
• Insulator and faceplate:
Krydon® fiberglass-reinforced
polyester material
• External hardware:
Stainless steel Box Style A B C D
Single
Gang
3.24"
[82.3]
2.70"
[68.6]
5.65"
[143.5]
6.48"
[164.7]
Double
Gang
6.38"
[162.2]
5.50"
[139.7]
5.69"
[144.4]
6.55'
[166.5]
149.2mm
5.87”
85.7mm
3.37”
121.6mm
4.79”
D
A
B
C
UNIVERSAL FOOTPRINT
• Provides field flexibility for
retrofits or installation in
tight places
• UL classified for use with
Appleton® U-Line Series
ROBUST CONSTRUCTION
• Can handle temperature extremes
ranging from -50°C to +55°C where
comparable products are not certified to
operate
• Epoxy powder coat finish, integral gasket
and stainless steel hardware ensure
suitability for NEMA 3RX applications
• Vibration tested at 1G to ensure
continuity in high vibration areas
SUPERIOR HARDWARE
• Stainless steel external
hardware eliminates
corrosion on critical
components and extends
product life
• Hex-head screws allow for
easy achievement of
specified torque values
ENHANCED SAFETY
• Rejects standard NEMA/
EEMAC plug configurations
that could potentially cause
an arc in hazardous areas
• Plug cannot be disengaged
under load
Dimensions
4EATON'S CROUSE-HINDS PowerGard® universal receptacles & back boxes
Wire Sizes
Solid 16-10 AWG
Stranded 16-12 AWG
SAFESPRING FACEPLATE
• Spring loaded faceplate
design prevents receptacle
from being energized
without use of UL certified
hazardous location plug
• Rugged Krydon® faceplate
won't crack after continued
use in the field
EASY-INSTALL TERMINALS
• Molded-in-place phase and ground
markings reduce installation errors
• Easy-to-wire saddle clamp terminals
reduce installation time and effort
• Receptacle suitable for though feed/loop
wiring; no additional wire nuts or
terminators needed
BEST-IN-CLASS COVER
• Combo head, stainless steel screws make
replacement easy
• Clearly marked operating instructions ensure
proper operation and safety when plugging
and unplugging
• Threaded cover option available for
exceptional watertight integrity
NG
FACEPLATE
a
ded fac
ep
late
e
vents receptacle
n
g energized
se of UL certified
s
location plu
g
K
rydon
f
aceplate
c
k
af
te
r
co
nt
in
ue
d
e
fi
e
ld
Terminal
Screw
Ground
Strap
Screw
Saddle
Clamp
5
EATON'S CROUSE-HINDS PowerGard® universal receptacles & back boxes
Ordering information
Type Config. Wire
Pole Hub
Size 20 AMP
125 VAC 20 AMP
250 VAC 15 AMP
125 VAC
Single Gang
Assembly *
Dead-end 2W, 3P
½ CFS150-2023-M15 CFS150-20232-M15 CFS150-1523-M15
¾ CFS175-2023-M15 CFS175-20232-M15 CFS175-1523-M15
1 CFS110-2023-M15 CFS110-20232-M15 CFS110-1523-M15
Thru-feed 2W, 3P
½ CFSC150-2023-M15 CFSC150-20232-M15 CFSC150-1523-M15
¾ CFSC175-2023-M15 CFSC175-20232-M15 CFSC175-1523-M15
1 CFSC110-2023-M15 CFSC110-20232-M15 CFSC110-1523-M15
Double Gang
Assembly **
Dead-end 2W, 3P
½ CFS250-2023-M15 CFS250-20232-M15 CFS250-1523-M15
¾ CFS275-2023-M15 CFS275-20232-M15 CFS275-1523-M15
1 CFS210-2023-M15 CFS210-20232-M15 CFS210-1523-M15
Thru-feed 2W, 3P
½ CFSC250-2023-M15 CFSC250-20232-M15 CFSC250-1523-M15
¾ CFSC275-2023-M15 CFSC275-20232-M15 CFSC275-1523-M15
1 CFSC210-2023-M15 CFSC210-20232-M15 CFSC210-1523-M15
Receptacle & Mounting Box
Type Config. Hub
Size Back
Box
Double
Gang
Dead-end
½ CFD250
¾ CFD275
1 CFD210
Thru-feed
½ CFDC250
¾ CFDC275
1 CFDC210
Type Config. Hub
Size Back
Box
Single
Gang *
Dead-end
½ CFD150
¾ CFD175
1 CFD110
Thru-feed
½ CFDC150
¾ CFDC175
1 CFDC110
Back Box
Replacement Parts
Type Cover
Spring Cover
Replacement PGSCA
Type Cover
Threaded Cover
Replacement PGTCA
Type Config.
Back Box
Hex Bolt
Replacement
PG SCREW PACK
PG SCREW PACK
SLOT
6EATON'S CROUSE-HINDS PowerGard® universal receptacles & back boxes
Type Wire
Pole 20 AMP
125 VAC 20 AMP
250 VAC 15 AMP
125 VAC
ENP
Standard
Plug
2W, 3P
ENP5201 ENP6202 ENP5151
Type Wire
Pole 20 AMP
125 VAC ** 20 AMP
250 VAC ** 15 AMP
125 VAC **
Replacement
Receptacle * 2W, 3P
*CFSR-2023-M15 CFSR-20232-M15 *CFSR-1523-M15
ENP Ark•Gard® Plug
Replacement Receptacle
* In order to be certified for Class I, Division 1, Group B applications, receptacles must be used on a single gang back box (part # CFD1XX or CFDC1XX)
** Both 15A/125 VAC and 20A/125 VAC PowerGard receptacles can accept either a 15A/125 VAC or 20A/125 VAC ENP plug.
* Single gang assembly listed for Class I, Division 1, Groups B, C, D for -25°C ambient and Class I, Division 1, Groups C, D for -50°C ambient.
** Double gang assembly Listed for Class I, Division 1, Groups C and D, Class I, Division 2, Groups B, C,and D. Manufacturer self certification of Class I, Division 1, Group B available.
7
EATON'S CROUSE-HINDS PowerGard® universal receptacles & back boxes
Rig Location
7, 8, 9
IEC 309 GHG 51 Series
Supplies power to portable
devices with requirements of
16 to 125A and features an
integrated AC3 rated
disconnect switch. Reinforced
polyester construction offers
reliability from -20° to +55°C.
Rig Location
2, 4, 5, 6, 9, 10
Roughneck™ Quick Connect
Quick connect, high
amperage, single conductor
connectors built to take
heavy abuse while providing
a simple, secure and safe
connection.
Single pole power Low to medium amp power Multi-pin control
Crouse-Hinds drilling solutions
Rig Location
1, 2, 3, 4, 5, 6, 7, 8, 9, 10
PowerGard® Series
Supplies power to lighting
systems, lighting panels and
portable hand tools on land-
based rigs.
Rig Location
1, 2, 4, 5, 6, 9, 10
Roughneck™ Single Pole Series
Secure, single pole power,
rated to 1135A for use in
hazardous and normal
locations. Ideal for delivering
power to the top drive. Rig Location
1, 2, 4, 5, 6, 9, 10
Roughneck™ Multi-pin Series
Heavy duty control and
instrumentation multi-pin
connectors for hazardous and
harsh industrial use.
# of pins# of pins # of pins
Rig
Se
rat
haz
loc
pow
Rig Location
1, 2, 4, 5, 6, 9, 10
Cam-Lok™ Single Pole Series
Quickly connect and
disconnect power systems
safely. Used for motors,
generators, indoor and
outdoor lighting distribution
panels and numerous other
power applications.
p
Connectors for
harsh/heavy
industrial areas
Connectors for
hazardous areas
1
2
3
4
5
10
9
8
6
7
Full portfolio
of land-based
Der
Der
r
ric
k/M
M
ast
a
1
VFD
/Ge
Ge
nerato
rs
2
FueFue
l T
ank
an
3
Motor
Con
on
tro
l/V
l/
FD/
D/
SCR
SCR
Ho
Ho
use
us
4
D
og
h
ouse
/
Ope
Ope
rat
rat
or'
or
s H
s H
s
ous
ous
e
e
e
5
Pow
Pow
er/
er/
PumPum
pS
p S
tat
tat
ionion
6
S
hale
S
hake
r
7
Mud
Mu
T
an
k
s
/Pu
/P
mp
s
8
Drawworks &
Top
Dr
i
v
e
9
Dri
Dri
lli
lli
ng
ng
Flo
Flo
or
or
10
powering
solutions
Rig Location
2, 4, 5
PowerMate™ Series
Supplies power to portable
devices such as motor
generator sets, compressors,
heating and cooling, welders
and lighting from 30 to 200A.
For more information:
If further assistance is
required, please contact
an authorized Eaton
Distributor, Sales Of ce,
or Customer Service
Department.
U.S. (Global Headquarters):
Eaton's Crouse-Hinds Business
1201 Wolf Street
Syracuse, NY 13208
TEL: (866) 764-5454
FAX: (315) 477-5179
FAX Orders Only:
(866) 653-0640
crousecustomerctr@eaton.com
Canada:
Toll Free: 800-265-0502
FAX: (800) 263-9504
FAX Orders only:
(866) 653-0645
Mexico/Latin America/
Caribbean:
TEL: 52-555-804-4000
FAX: 52-555-804-4020
ventascentromex@eaton.com
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Crouse-Hinds Division
1201 Wolf Street
Syracuse, NY 13208
© 2016 Eaton
All Rights Reserved
Printed in USA
Publication No. 5083-0816
August 2016