EPSA13 Series * Programmable Spread Spectrum Oscillators * Low EMI LVCMOS Output * +3.3V Supply Voltage * Tri-State and Power Down Options * Center Spread and Down Spread Modulation Options * 4 Pad Ceramic SMD Package * RoHS Compliant (Pb-Free) EPSA13 H L W 1.6 7.0 5.0 OSCILLATOR ELECTRICAL SPECIFICATIONS Nominal Frequency Operating Temperature Range Storage Temperature Range Supply Voltage (VDD) Maximum Supply Voltage Input Current Frequency Tolerance / Stability Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise Time / Fall Time Duty Cycle Load Drive Capability Output Control Function Tri-State/Power Down Input Voltage Power Down Output Disable Time Power Down Output Enable Time Standby Current Tri-State Output Disable Time Tri-State Output Enable Time Disable Current Spread Spectrum Percentage 2.000MHz to 25.000MHz 25.001MHz to 50.000MHz 50.001MHz to 100.000MHz 100.001MHz to 166.000MHz 166.001MHz to 200.000MHz Inclusive of All Conditions: Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, 1st Year Aging at 25C, Shock, and Vibration IOH = -8mA IOL = +8mA 10% to 90% of waveform at 50% of waveform High Impedance Internal Pull Down Resistor of 100kOhms Typical on Pad 1 VIH of 70% of VDD Minimum No Connection VIL of 30% of VDD Maximum 90% of VDD Minimum 10% of VDD Maximum 3nSeconds Maximum 50 5(%) 15pF Maximum Tri-State or Power Down Enables Output Enables Output Disables Output: High Impedance 100nSec Maximum 3mSec Maximum 10A Maximum 100nSec Maximum 100nSec Maximum 20mA Maximum Center Spread Down Spread 30kHz Minimum, 32kHz Typical, 45kHz Maximum 100pSec Maximum 10mSec Maximum Unloaded; Pad 1 = Ground Unloaded; Pad 1 = Ground 0.25%, 0.50%, 0.75%, 1.0%, 1.5%, 2.0% -0.50%, -1.0%, -1.5%, -2.0%, -3.0%, -4.0% Modulation Frequency Period Jitter Start Up Time 2.000MHz to 200.000MHz -40C to 85C -55C to 125C 3.3VDC 10% -0.5VDC to 4.2VDC 15mA Maximum 23mA Maximum 27mA Maximum 30mA Maximum 40mA Maximum 50ppm Maximum Cycle to Cycle; Spread Spectrum-On MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EPSA13 CERAMIC 3.3V OS8F 10/10 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EPSA13 B B H A - 44.736M TR FREQUENCY TOLERANCE & STABILITY B=50ppm Maximum AVAILABLE OPTIONS Blank=Bulk TR=Tape and Reel OPERATING TEMPERATURE RANGE B=-40C to +85C FREQUENCY SPREAD SPECTRUM PERCENTAGE A = 0.25% Center Spread G = -0.50% Down Spread B = 0.50% Center Spread H = -1.00% Down Spread C = 0.75% Center Spread J = -1.50% Down Spread D = 1.00% Center Spread L = -2.00% Down Spread E = 1.50% Center Spread N = -3.00% Down Spread F = 2.00% Center Spread P = -4.00% Down Spread OUTPUT CONTROL FUNCTION H=Tri-State J=Power Down SUGGESTED SOLDER PAD LAYOUT MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS 2.20 0.15 5.00 0.15 MARKING ORIENTATION 2.0 (X4) 1 4 7.00 0.15 2.0 (X4) 1.4 0.2 5.08 0.15 3.68 0.15 2 3 1.60 0.20 1.4 0.1 Pin 1: Tri-State or Power Down Pin 3: Output Pin 4: Supply Voltage Pin 2: Case Ground TAPE AND REEL DIMENSIONS Solder Land (X4) 3.1 1.6 Tolerances= +0.1 ALL DIMENSIONS IN MILLIMETERS TAPE A 16.3 B C D E 7.5.1 6.75.1 4 .1 2.1 F G H J K 8.1 A0* 1.5 +.1-0 B0* .3 .05 F M N O P Q 1.5 MIN 50 MIN 20.2 MIN 13.2 40 MIN QTY/REEL 1,000 REEL L K0* R S T U V 2.5 MIN 10 MIN 22.4 MAX 360 MAX 16.4+2-0 *Compliant to EIA 481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS Characteristic Specification ESD Susceptibility Fine Leak Test Flammability Gross Leak test Mechanical Shock Moisture Resistance Moisture Sensitivity Resistance to Soldering Heat Resistance to Solvents Solderability Temperature Cycling Vibration MIL-STD-883, Method 3015, Class 1, HBM: 1500V MIL-STD-883, Method 1014, Condition A UL94-V0 MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 1004 J-STD-020, MSL 1 MIL-STD-202, Method 210, Condition K MIL-STD-202, Method 215 MIL-STD-883, Method 2003 MIL-STD-883, Method 1010, Condition B MIL-STD-883, Method 2007, Condition A Line 1: ECLIPTEK Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: S XXXXX Ecliptek Manufacturing Identifier Configuration Designator MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS ECLIPTEK CORP. OSCILLATOR EPSA13 CERAMIC 3.3V OS8F 800-ECLIPTEK www.ecliptek.com for latest revision REV.DATE 10/10 Specifications subject to change without notice.