Specification DIN EN 60751
Temperature range -70°C up to +850°C
Tolerance Class B: -70°C up to +650°C
Tolerance Class 2B: -70°C up to +850°C
Temperature coefficient TCR= 3850 ppm/K
Leads Pt- wire
Lead length (L) 6mm ±1mm
Long-term tests 1000h at 850°C (energized, open)
smaller then the allowed deviation according
to DIN B. 1000 h at 650°C (under current
as clean MI-type) smaller then the allowed
deviation according to DIN B
Vibration resistance at least 40g acceleration with 8ms half sine
wave signal, depends on the installation
Shock resistance at least 100g acceleration at frequencies
from 10Hz up to 2000Hz, depends on the
installation
Environmental conditions Unhoused for dry environment only,
Up to 650°C in housings also as clean MI-type
possible, above 650°C no reducing
atmosphere, free air admission necessary
Insulation resistance >100 M at 20°C; >2 M at 650°C
Self heating 0.2 K/mW
Response time Water current (v= 0.4m/s): t0.5 = 0.05s
t0.9 = 0.17s
Air stream (v= 2m/s): t0.5 = 3.3s
t0.9 = 13.0s
Measuring current 20°C max. 5mA; 850°C max. 2.8mA
(self heating has to be considered)
Note Other tolerances, values of resistance and wire
lengths are available on request.