MIL-DTL-38999 Series III Type Connectors with PCB contacts TVP00R wall mounting receptacle (back panel mounting) (with clinch nuts) CONNECTOR WITH CLINCH NUTS (4 PLACES) S 2 PLACES LL M B THREAD R 2 PLACES L AA Z PCB TAIL STICKOUT .062 .001 DIA. FOR SIZE 16 CONTACTS T THREAD CLINCH NUT RED BAND .005 M BLUE BAND .019 .001 DIA. FOR SIZE 20 & 22D CONTACTS V THREAD 1.240 MAX. HOW TO ORDER * Order by applicable 88/91 part number in table below. 88 prefix designates olive drab cadmium plated connector shell. 91 prefix designates electroless nickel plated connector shell. * Add insert arrangement to end of number. Refer to insert availability chart on page 4 and pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for pins in normal position, S for sockets in normal position. See page 25 for alternate rotation letter to use. Example part number: 88-628741-35P designates shell size 9 with a 9-35 insert and pin contacts in normal position. * Z dimension is determined by contact type in the insert arrangement. * Most common options are shown; other options are available. Shell Size Part Number with Clinch Nuts B Thread Class 2A (Plated) 0.1P-0.3L-TS L Max. M +.000 -.005 Composite Series III connectors are available; consult Amphenol, Sidney, NY. R S Max. T Thread V Thread Metric Designates true position dimensioning Red band indicates fully mated Blue band indicates rear release contact retention system AA Max. LL Panel +.006 Thickness -.000 Z Size 16 & 20 Contacts Size 22D Contacts 9 88/91-628741-XXX .6250 .469 .820 .719 1.094 .112-40UNC-3B M12X1-6g .234 .905 .228-.178 .242-.181 11 742-XXX .7500 .469 .820 .812 1.187 .112-40UNC-3B M15X1-6g .234 .905 .228-.178 .242-.181 13 743-XXX .8750 .469 .820 .906 1.281 .112-40UNC-3B M18X1-6g .234 .905 .228-.178 .242-.181 15 744-XXX 1.0000 .469 .820 .969 1.344 .112-40UNC-3B M22X1-6g .234 .905 .228-.178 .242-.181 17 745-XXX 1.1875 .469 .820 1.062 1.437 .112-40UNC-3B M25X1-6g .234 .905 .228-.178 .242-.181 19 746-XXX 1.2500 .469 .820 1.156 1.531 .112-40UNC-3B M28X1-6g .234 .905 .228-.178 .242-.181 21 747-XXX 1.3750 .500 .790 1.250 1.625 .112-40UNC-3B M31X1-6g .204 .905 .228-.178 .242-.181 23 748-XXX 1.5000 .500 .790 1.375 1.750 .138-32UNC-3B M34X1-6g .204 .905 .228-.178 .242-.181 25 749-XXX 1.6250 .500 .790 1.500 1.875 .138-32UNC-3B M37X1-6g .204 .905 .228-.178 .242-.181 All dimensions for reference only. * Consult Amphenol for more information on ordering connectors with clinch nuts. 36