The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. QM (1.78mm-.070") CONNECTORS-"MICRO 70" General Designed to fill the needs of high density and miniature interconnection, the QM series are Super-Small IDC Connection. This IDC plug uses I/O Cable <AWG # 30> with 0.89mm (.035") spacing. This new QM connectordesign ensures RFI/EMI shielding protection. Available in 8, 14, 26, and 32 way. Features (1) 1.78mm (.070") grid contact position enables high density designs. (2) Ribbon construction of contacts provides excellent mechanical strength. (3) Capable group IDC termination of 0.89 mm (.035") pitch cable <AWG No.30> to achieve labor saving in connection work. (4) The connectors can be grounded to the PCB to isolate EMI/FRI generated from the cable and connector as well as latched to PCB. (5) Zinc alloy die-cast shell and Metallic shell reduce the penetration of external EM noise. (6) Hood type and with Lock mechanism type are available for Cover shell. One touch lock mechanism assures easy and quick connection. Applications Suitable for personal terminals, peripherals and terminals. 177 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Specifications Material and Finish Item Specification Item Current Rating 0.5A Hood Voltage AC100V Insulation Insulation Resistance 100M or more DC100V Contact Resistance 35m or less DC100mA Withstanding Voltage 300V for 1 minute Contact Material Finish Zinc alloy die-cast Silver finish PET Resin Black Pin Beryllium copper Socket Phosphor bronze Selective gold plating Ordering Information QM 10 - 14 R L - PR (1) (2) (3) (4) (5) (6) QM 30 - 14 P - EP (1) (2) (3) (4) (6) (7) QM 14 - CS (1) (3) (6) (7) (7) (1) Series Number: QM (2) Series sign for series 10: Right Angle P.C. Mount receptacle 20: Straight P.C. Mount receptacle 30: IDC Plug 40: Solder Type (3) No. of Pins: 8, 14, 26 and 32 way (4) Type of opening P: Plug (for Hood cover) PA: Plug (for cover with Lock mechanism) R: Receptacle (5) Type of Shell Latch mounting Blank: Connector unit on a level with PCB. (see Fig 1) L: Protector on a level with PCB (see Fig 2) (6) Accessories CS: Cover case with Lock mechanism CV: Hood cover case CF: Hood PR: Protector CF1: Hood PR1: Protector (Without mounting hole) EP: Ground Plate SP: Stopper Plate (7) Specification (50): RoHS compliant Connector Unit Fig. 1 Fig. 2 Protector PCB 178 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Plug Connector 1. Applicable Cable No.of Core Size Pitch W 8 14 AWG No.30 AWG No.30 0.89 0.89 7.12 12.46 26 32 AWG No.30 AWG No.30 0.89 0.89 23.14 28.48 H 0.7-0.75 *When Vinyl Chloride is used as Insulator 2. I/O End Finish No.of pin A B 8 14 26 4.8 5.5 6.8 After holding shield braid over cable sheath, wrap metal shielded 32 7.3 tape up to about 1.5 circles. Metal-shielded tape 3. Tooking No.of pin 8 14 26 32 Part No. Pressure Block Guide Plate QM30-8PA-EP50 QM30-8GP QM30-8P-EP50 QM30-14PA-EP50 QM30-14P-EP50 CL902-0075-6 QM30-14GP CL902-0035-1 QM30-26PA-EP50 QM30-26P-EP50 QM30-PB CL902-0037-7 QM30-32PA-EP50 QM30-26GP CL902-0036-4 Connecting Press HIF Connecting Press HHP-502 CL550-0082-2 QM30-32GP CL902-0076-9 4. How to install Cover case Please refer to next page. 5. Precaution for Cable End Finish The cover case of QM series is made of zinc alloy die-cast which is effective for EMI shielding protection and the outside of cover case is coated with silver to provide excellent connection. The shield structure for this QM series comprises 5 parts as per figure below, Therfore, I/O End Finish Treatment is essential for EMI shielding protection. Grounding to PCB can be accomplished through the connection of plates provided on both sides of plug and receptacle. Cover case Protective plate Plate (A) Protector Plate (B) 179 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Plug Connector (1) Use HIROSE Connecting tools, to perform IDC connection to Connector Unit (QM30_*PA-EP). Connector unit Cable (2) Take out one side of the lock from the housing. Bend the accompanying clamp into a bow shape and install it on the housing. Clamp Lock Core case Hole for installing connector unit Clamp (3) Insert the lock plate into the slit at both sides of Connector Unit. Position for fixing spring portion of Lock Plate Slit (4) Insert another lock plate as described above, and fix connector unit into the correct position in the cover case. Lock plate Stopper hole (5) Fix spring portion of lock plate into the correct position. (6) Assemble it with attached screw (M25*0.45*6) (When assembling the cover case,do it by pushing the lock button; Connector unit be completely installed) Cover case Lock plate Caution: Be sure to install the cable, connector unit, and lock at the specified positions. Parts installed at improper positions will cause a gap in the housing and damage the connector unit. 180 Screw 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. QM40-P/QM40-PA (Solder Plug Connectors) The solder connectors have been developed for use with thinner cables than the conventional specified cables. The connectors are basically the same as the QM30. Design the harness by considering the following. 1. Solder wires quickly (15W * 3sec) because the connector housings are made of PET resin (thermoplastic). 2. Be sure to make the diameter cables to the dimensions specified on Page 177. Connector Setup View Cover case: QM-*-CV Connector : QM30-*P-EP(50) Cover case: QM-*-CS(50) Connector : QM30-*PA-EP(50) 181 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. P.C Mount Receptacle Connector 1. PCB Layout (mm) Max. 2. Mounting Style Thickness of PCB: 1.6 mm Min. No.of pin Part No. 8 14 QM*-8R QM*-14R 5.34 9.62 10.68 14.96 A B 26 32 QM*-26R QM*-32R 21.36 25.64 26.70 30.98 (mm) A Type PCB End No.of pin Part No. 8 14 26 QM10-8R-PR QM10-14R-PR QM10-26R-PR 32 QM10-32R-PR Panel B Type No.of pin Part No. 8 32 QM10-8RL-PR QM10-32RL-PR Panel C Type STOPPER PLATE assures strong holding force between connector and PCB against the external forces. No.of pin Part No. Part No. A 8 14 QM10-8RL-PR QM10-14RL-PR QM-8-SP1 QM-14-SP1 16.00 21.34 26 32 QM10-26RL-PR QM10-32RL-PR QM-26-SP1 QM-32-SP 32.02 37.36 PCB End 182 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 3. Panel Cutout (mm) Thickness of PCB: Max. 1.6 mm Max. No.of pin Part No. 8 14 QM*-8R*-PR* QM*-14R*-PR* 15.62 21.02 20.96 26.36 A B 26 32 QM*-26R*-PR* QM*-32R*-PR* 31.64 37.04 36.98 42.38 4. Precaution for selection of Cleaning Solvents Insulation material is PET that has excellent chemical and heat resistance. As for Protector, please refer to table - 1 below for selection of cleaning because of the coating treatment used. Table-1 Ultrasonic cleaning 1 Alcohol Vapor phase cleaning 2 1: Ultrasonic cleaning : 10 minutes 2: Vapor cleaning : 3 minutes (Repeat of vapor and ultrasonic cleaning (30 sec)). ; For thirty minutes to one hour after washing the connectors, handle PCBs on which the connectors are mounted with special care because the coating surface swells and can be easily flawed. 183 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Plug Connector (for Cover Case with Lock Mechanism) QM30-14PA-EP50 Unit: mm HRS No. No.of pin Part No. A B CL226-0061-4-50 CL226-0062-7-50 8 14 QM30-8PA-EP50 14.12 9.32 QM30-14PA-EP50 19.46 14.66 RoHS CL226-0063-0-50 CL226-0064-2-50 26 32 QM30-26PA-EP50 30.14 25.34 QM30-32PA-EP50 35.48 30.68 YES 30 Cable Exit Cover Case with Lock Mechanism QM-14-CS50 Unit: mm 184 HRS No. No.of pin Part No. A B CL226-0057-7-50 CL226-0058-0-50 8 14 QM-8-CS50 QM-14-CS50 18.02 23.36 o4.8 o5.5 CL226-0059-2-50 CL226-0060-1-50 26 32 QM-26-CS50 QM-32-CS50 34.04 5.5x8.5 39.38 5.5x9.5 RoHS YES 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Plug Connector (for Hood Cover Case) QM30-14P-EP(50) Unit: mm HRS No. No.of pin Part No. A B CL226-0039-5-50 CL226-0009-4-50 8 14 QM30-8P-EP50 14.12 9.32 QM30-14P-EP50 19.46 14.66 YES RoHS CL226-0010-3-50 26 QM30-26P-EP50 30.14 25.34 HRS No. No.of pin Part No. A B C RoHS CL226-0040-4 CL226-0011-6 8 14 QM-8-CV QM-14-CV 15.42 20.76 18.5 o4.8 o5.5 YES Hood Cover Case QM-14-CV Unit: mm 185 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Soldering Type (for use with a Hood Cover Case) ????? QM40-14P-EP50 Unit: mm HRS No. No.of pin Part No. A B CL226-0072-0-50 CL226-0078-7-50 8 14 QM40-8P-EP50 14.12 9.32 QM40-14P-EP50 19.46 14.66 YES RoHS CL226-0079-0-50 26 QM40-26P-EP50 30.14 25.34 Soldering Type (for use with a Cover Case with Lock) ????? QM40-14PA-EP50 Unit: mm 186 HRS No. No.of pin Part No. A B CL226-0083-7-50 CL226-0076-1-50 8 14 QM40-8PA-EP50 14.12 9.32 QM40-14PA-EP50 19.46 14.66 CL226-0080-9-50 CL226-0092-8-50 26 32 QM40-26PA-EP50 30.14 25.34 QM40-32PA-EP50 35.48 30.68 RoHS YES 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Dip Post Receptacle with Protector (Right Angle P.C. Mount Type) Dip Post QM10-14R-PR52 Unit: mm HRS No. No.of pin Part No. A B C CL226-0042-0-52 CL226-0015-7-52 8 14 QM10-8R-PR52 26.02 21.02 9.62 QM10-14R-PR52 31.36 26.36 14.96 YES RoHS CL226-0016-0-52 26 QM10-26R-PR52 42.04 37.04 25.64 Dip Post Receptacle with Protector (Right Angle P.C. Mount (L) Type) Dip Post QM10-14RL-PR52 Unit: mm HRS No. No.of pin Part No. A B C CL226-0044-5-52 CL226-0019-8-52 8 14 QM10-8RL-PR52 26.02 21.02 9.62 QM10-14RL-PR52 31.36 26.36 14.96 CL226-0020-7-52 CL226-0033-9-52 26 32 QM10-26RL-PR52 42.04 37.04 25.64 QM10-32RL-PR52 47.38 42.38 30.98 RoHS YES 187 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Dip Post Receptacle (without Mounting Hole) with Protector (Right Angle P.C. Mount Type) Dip Post QM10-14RL-PR150 Unit: mm HRS No. No.of pin Part No. A B CL226-0073-3-50 CL226-0023-5-50 8 14 QM10-8RL-PR150 17.82 9.62 QM10-14RL-PR150 23.16 14.96 CL226-0024-8-50 CL226-0053-6-52 26 32 QM10-26RL-PR150 33.84 25.64 QM10-32RL-PR152 39.18 30.98 RoHS YES Receptacle with Protector (Straight Dip Type) Dip Post Dip Post QM20-14R-PR(50) Unit: mm 188 HRS No. No.of pin CL226-0017-2-50 CL226-0018-5-50 14 26 Part No. A B C RoHS QM20-14R-PR50 31.36 26.36 14.96 YES QM20-26R-PR50 42.04 37.04 25.64 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Receptacle (without Mounting Hole) with Protector (Straight Dip Type) Dip Post Dip Post QM20-14R-PR1(50) Unit: mm HRS No. No.of pin Part No. A B CL226-0054-9-50 CL226-0055-1-50 14 26 QM20-14R-PR150 23.16 14.96 QM20-26R-PR150 33.84 25.64 YES RoHS CL226-0056-4-50 32 QM20-32R-PR150 39.18 30.98 HRS No. No.of pin Part No. A B RoHS CL226-0086-5 14 QM-14-CF 23.4 5.5 YES Hood (QM--CS) QM-14-CF Unit: mm 189 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Hood (QM--CV) QM-8-CF1 Unit: mm HRS No. No.of pin Part No. A B RoHS CL226-0091-5 14 QM-14-CF1 21 5.5 YES HRS No. No.of pin Part No. A CL226-0100-4-50 CL226-0101-7-50 8 14 QM-8-SP150 QM-14-SP150 17.18 22.52 YES CL226-0066-8-50 32 QM-32-SP50 38.54 Stopper Plate QM-14-SP150 Unit: mm 190 RoHS 04/2009