WR3M - High-End Rework Content WR3M - Innovation newly designed The WR3M Accessories Technical data Scope of delivery Weller Flexibility. 4-9 6 8 9 9 10-13 Refer to the matrix on page 26 to make your choice of connecting tools for the WR3M. Hot Air Nozzles 14-15 For hot air pencil HAP1 and HAP200 Nozzles 16 For DSX80, DXV80 Soldering Tips 17-22 Plug-in adjusted soldering tip set for WMRT 17 Soldering tips for WMRP 18 Soldering tips for WSP80, WP80 and MPR80 19-20 SMT soldering tip for reworks on SMT components 20 Soldering tips for micro soldering pencil WMP 21 Soldering tips for soldering iron WSP150 22 Additional Safety Rests 23-24 Accessories 25 Matrix 26 Make your choice of connecting tools. 2 3 WR3M - Rework on the highest level Accessories New Design 3 independent tool channels High-Speed Micro Tools USB port Weller has taken the rerwork station to the highest level; with the new WR3M. with automatic tool detection guarantee the simultaneous operation of 3 soldering tools. The versatile repair station is specifically tailored to the needs and requirements of professional repairs to latest-technology electronic sub-assemblies in industrial production engineering and in the repair and laboratory fields. Precise temperature control performance at the soldering tip is guaranteed by the digital control electrotechnology together with superior-quality sensor and heat-transfer technology. High-speed measured-value acquisition provides for maximum temperature precision and optimum dynamic temperature performance in load situations. All Weller High-Speed Micro Tools such as the WMRP micro soldering pencil and the WMRT micro desoldering tweezers can be connected. But also extremely powerful accessories, such as the new HAP200 hot-air pencil, can be easily connected. The WR3M is equipped with a mini USB port. The extensive PC software supplied can be used to update the software on the control unit. Software for monitoring, parameterising and data logging is included in the software package. Hot-air pencil HAP200 Operation simplicity The HAP 200 provides a directional hot air flow that is adjustable. Electronic temperature control from 150F to 999F. Different nozzles available as accessory. Finger switch controls adjustable pump. (For use with WR 3M only.) The big LCD display allows clear information and simple handling. Innovative special functions such as automatic channel changing, temperature preselection buttons for each channel, Factory Calibration Check. Technical data Dimensions: L x W x H (inches): 10.75 x 9.25 x 4.02 Weight: Approximately 14.8 lbs. Power supply voltage: 120 VAC, 60 Hz Power consumption: 400 Watts EOS / ESD Properties All Tool Handles, Cordsets and Air Flow are Static Free Fuse: 4 Amp Temperature control range: Variable in (1) degree increments from 150F - 999F WRK Rework Set The newly developed, innovative desoldering system facilitates soldering and desoldering of large SMT components up to 30 x 30 mm. The desoldering system can be connected to the additional vacuum channel (pick up) of the WR 3M. Temperature accuracy: 17F (Average tip temperature can be offset 9F at idle with no load) Temperature stability: 9F Hot Air / Vacuum Pump (duty cycle: 30 seconds on, 30 seconds off) Vacuum Pick-up Pump (duty cycle: 60 seconds on, 30 seconds off) Max. vacuum 0.7 bar Max. delivery rate 18 l/min Hot air max. 15 l/min Max. vacuum 0.5 bar Max. delivery rate 1.7 l/min WVP Components can be easily and safely moved with the aid of the WVP vacuum pipette. The housing is antistatic and the vacuum nipples are available in 2 different sizes. The desoldering system can be connected to the additional vacuum channel (pick up) of the WR 3M. DXV80 Desoldering Iron 80 W / 24 V DSX80 Desoldering Iron 80 W / 24 V (optional accessory) 6 7 Order No. WR3M WR3M repair station Adapter for HAP 200 hot-air pencil CD with USB software USB cable Controllable temperature range is tool-dependent HAP 200 Hor air pencil WP 80 Soldering Iron, 80 W / 24 V WR3M scope of delivery 8 WR3000M set scope of delivery Order No. WR3M WR3M Repair Station HAP200 Hot-air pencil with WDH30 Safety rest DXV80 Desoldering iron with WDH40 Safety rest WP80 Soldering iron with WDH10T Stop + go Safety rest WVP Vacuum pick up WDC2 Dry cleaner Adapter for HAP200 Hot-air Pencil CD with use software USB cable Nozzle replacement tool 1.2mm and 3.0mm hot gas nozzles Nozzle adapter for HAP200 2.3mm and 2.5mm desoldering nozzles Desoldering cleaning tools, brush, and spare filters Color-coded clips for easy tool identification 9 Weller Flexibility WR3M - Innovation newly designed 3 tool channels with automatic tool detection Refer to the matrix to make your choice of connecting tools for the WR3M. (See Matrix page 26) HAP200 Hot air pencil set DSX80 Desoldering iron set and service kit WMRP Soldering pencil set for RT soldering tips WP80 Micro Soldering pencil set HAP200 0052711799 DSX80 0051318399 WMRP 0052919099 WP80 0052918199 The HAP200, 200 W/24 V, provides a directional hot airflow that is adjustable and static-free. Electronically temperature controlled from 150F to 999F. Different nozzles available as accessories. Finger switch controls speed adjustable pump. Hot air pencil set, consisting of HAP 200 with finger switch, WDH 30 Safety rest for pencil, nozzle 1,2 mm and 3,0 mm, key and nutdriver for nozzle changing. For pencil only, order 0052711699. An 80 W/24 V desoldering iron for electronics rework. Electronically temperature controlled. Micro-finger switch controls quick-start, fast action vacuum pump. Different interchangeable tiplets are available as accessories. DSX80 set, consisting of DSX80 Desoldering iron, WDH30 Safety rest, cleaning tool, glass collector, two desoldering nozzles, gasket, anti-bloc paste, filter. For pencil only, order 0051319099. The RT soldering tips have an extremely short heat-up time. All component parts of the system, such as the sensor and heating element, are designed for optimum heat transfer. This ensures absolute efficiency in the utilization of the power provided by the supply unit. The recovery time is minimized. Changing soldering tips is quick, easy, and, most importantly, requires no tools. WMRP set, consisting of WMRP soldering pencil, RT3 soldering tip and WDH50 Safety rest. For pencil only, order 0052917199. The 80 W micro soldering pencil WP80 persuades with its short tipto-grip design, being of big advantage for work under microscopes. The distance from grip to the tip is 40 mm only. WP80 set, consisting of WP80 soldering pencil and WDH10 Safety rest. For pencil only, order 0052918099. HAP1 Hot air pencil set DXV80 Inline desoldering set WSP80 Micro soldering pencil set MPR80 Peritronic soldering pencil set HAP1 0052711899 DXV80 0051318299 WSP80 0052917899 MPR80 0053313199 The HAP1, 100 W/24 V, provides a directional hot airflow that is adjustable and static-free. Electronically temperature controlled from 150F to 999F. Different nozzles available as accessories. Finger switch controls speed adjustable pump. Hot air pencil set, consisting of HAP1 with finger switch, WDH30 Safety rest for pencil, nozzle 1,2 and 3,0 mm, key and nutdriver for nozzle changing. Connectable to all 80 W desoldering stations. Handle utilizes the replaceable solder collector to hold the extracted solder. Use off thred less DX nozzles. DXV80 set, consisting of DXV80 Desoldering iron, and WDH40 Safety rest for iron. For pencil only, order 0051318099. A micro soldering pencil, 80 W/24 V. This soldering pencil can be universally used in all situations from extremely delicate soldering to those where there is a greater temperature requirement. WSP80 set, consisting of WSP80 Micro soldering pencil with WDH10 Safety rest. For pencil only, order WSP80. An 80 W Antistatic Peritronic soldering pencil that gives all-round vision when making intricate connections. Antistatic cord and handle. Electronically temperature controlled. Consists of MPR80 Peritronic soldering iron and KH25P Safety rest. Large LCD display Own vacuum channel for pick-up USB port Innovative special functions Comprehensive PC software All High-Speed Micro-Tools can be connected New powerful hot-air pencil 10 11 Weller Flexibility Weller Flexibility Refer to the matrix to make your choice of connecting tools for the WR3M. (See Matrix page 26) Refer to the matrix to make your choice of connecting tools for the WR3M. (See Matrix page 26) WMPT Micro soldering pencil set with stop + go stand WMP 0053315999 WSP150 Soldering iron set WSP150 0052918999 WSB80 Solder Bath WSB150 Solder Bath WSB80 0052704099 WSB150 0052704299 The WSB80 is a very useful rework preparation tool. The solder bath is temperature controlled continuously from 150F to 850F via an existing 80 W power unit (sold separately). The solder bath can be used to tin wire ends and clean leads of all extraneous solder particles in preparation for reworking. (Usable with lead free solder.) Compatible with WD1, WD1M, WD2, WD2M, WRS3000, or WR3M power units. The WSB150 solder bath is optimally suited to tin coating and preparation of soldering components. It has a temperature range of 150F - 999F with heat output of 150 W. To guard against dripping solder residue, the solder bath is placed in a V2A tray, supplied as an optional extra. (Usable with lead free solder.) Compatible with WD2, WD2M, or WR3M power units. The 65 W micro pencil is up to the task with superior performance for both heat-up and thermal efficiency. Suitable to handle all micro components and fine pitch tasks. The WMP provides an extremely short tip-to-grip distance. The heater is integrated into the handle. When the tip wears out the heating element goes on. WMP set consisting of WMP micro soldering pencil and WDH20T Safety rest with Stop + Go function for WMP. For pencil with WDH20 stand, order 0052917999. For pencil only, order WMP. The WSP150, 150 W/24 V, soldering iron was specially developed for soldering tasks with extremely high heat requirements. The 150 W heater power combined with optimal transfer of heat to the soldering tip guarantees the high performance capability of the soldering pencil. WSP150 set, consisting of WSP150 Soldering pencil, WDH30 Safety rest for iron. For pencil only, order 0052917099. WHP80 (80 W/24 V) Preheating Plate WRK Chip Removal Kit WHP80 0052702899 WRK Chip kit 0051515599 WMRT Tweezers set WTA50 Tweezers set With a heating surface of 80 x 50 mm, for preheating IC boards prior to micro rework. Compatible with WD1, WD1M, WD2, WD2M, WRS3000, or WR3M power units. WMRT 0051317399 WTA50 0053313399 Innovative desoldering system to solder and desolder SMD components up to the size of 30 x 30 mm. Connectable to the additional vacuum channel of the WR3M. WVP Vacuum Pick-Up WVP Vacuum pick-up 0052918499 The new WMRT desoldering tweezers 80 W/24 V enable with their twin parallel adjusted tiplets a significant precise and desoldering of very small SMD components. Placed in the Safety rest WDH60 the tips are automatically switched off for increasing endurance. For tweezers only, order 0051317299. 12 The tweezers are used to desolder SMD components. The tweezers have two moveable heating elements. WTA50 set, consisting of WTA50 Tweezers, AK51 Safety rest for Tweezers. For tweezers only, order 0051317199. Vacuum pick-up for easy manually handling of SMD components. The housing is antistatic. The vacuum nipples are available in two different sizes. 13 Hot Air Nozzles Hot Air Nozzles for hot air pencil HAP1 and HAP200 for hot air pencil HAP1 and HAP200 HAP1 (page 10) x HAP1 (page 10) HAP200 (page 10) HAP200 (page 10) Adapter Order No. 0058761728 y y Description 14 Adapter Order No. 0058761728 x Dimensions (mm) x y Type Hot air nozzle four sides heated with hot plate 18.0 x 18.0 16.0 x 16.0 12.0 x 12.0 Q10 SK769B SK709 0058727785 0058727816 0058727812 Hot air nozzle four sides heated with hot plate 12.5 x 15.0 Q08 0058727783 Hot air nozzle four sides heated with hot plate 15.0 x 10.0 Hot air nozzle four sides heated with hot plate 6.0 x 9.0 Hot air nozzle four sides heated with hot plate 6.0 x 6.5 Hot air nozzles two sides heated with hot plate 10.0 x 18.0 Hot air nozzle two sides heated with hot plate 15.0 x 10.0 Hot air nozzle two sides heated with hot plate 10.0 x 13.0 Hot air nozzle two sides heated with hot plate 10.5 x 10.5 Q06 Q04 Q02 D10 D08 D06 D04 Order No. Description Dimensions (mm) x y Type Order No. Flat nozzle 12.0 x 1.5 F06 0058727772 Flat nozzle 10.5 x 1.5 F04 0058727773 Flat nozzle 8.0 x 1.5 F02 0058727774 Round nozzle long straight O 2.0 R10 0058727787 Round nozzle long bent O 2.0 R08 0058727786 Round nozzle O 3.0 R06 0058727822 Round nozzle O 1.2 R04 0058727821 Round nozzle O 0.8 R02 0058727823 Dual nozzle O 1.5 x 10.0 FD4 0058727775 Dual nozzle O 1.5 x 8.0 FD2 0058727776 0058727780 0058727778 0058727777 0058727784 0058727781 0058727782 0058727779 15 Nozzles Soldering Tips Threadless nozzles for desoldering iron DSX80 and DXV80 Plug-in adjusted Soldering Tip Set for WMRT The new X series nozzle feature a threadless fixture system whereby the nozzle is inserted into the head and locked into place by apllying a 1/4 turn. This feature allows the nozzles to be quickly and easily exchanged and also improves the rate of thermal transfer from the head to the nozzle. WMRT (page 12) DSX80 (page 10) DXV80 (page 10) Model Description mm mm mm Order No. DX110 Nozzle 1.9 0.7 23 0051314099 DX111 Nozzle 2.5 0.7 23 0051314199 DX112 Nozzle 2.3 1.0 23 0051314299 DX113 Nozzle 2.5 1.2 23 0051314399 Nozzle 2.5 1.2 23 0051315099 DX113HM Type Description Width A Thickness B Order No. RTW 1 Tip set bent 45 O 0.4mm RTW 2 Tip set bent 45, Chisel 0.7mm 0.4mm 0054465299 RTW 3 Tip set bent 45, Chisel 3mm 1.0mm 0054465399 RTW 4 Tip set bent 45, Chisel 6mm 1.0mm 0054465499 0054465199 with improved thermal transfer DX114 Nozzle 3.3 1.8 23 0051314499 DX115 Nozzle 1.9 0.7 23 0051314599 DX116 Nozzle 2.7 1.2 29 0051314699 DX117 Nozzle 2.9 1.5 23 0051314799 DX118 Nozzle 1.5 0.7 23 0051314899 Needle Tiplet 1.1 0.7 31 0051315199 DX119 with not wettable stainless steel tube for removal of solder bridges in connection with hot air pencil DX120 Nozzle 2.5 1.1 22 0051315299 without inside tube, for cleaning of SMD pads Conus insert 16 cleaning tool 0058706794 17 Soldering Tips Soldering Tips Soldering tips for WMRP for WSP80, WP80 and MPR80 WSP80 (page 11) WMRP (page 10) Type Description Width A RT1 Needle tip O 0.2mm RT1SC Chisel 0.4mm Thickness B Order No. 0054460199 0.15mm Round tip slim O 0.8mm RT3 Chisel tip 1.3mm 0.4mm 0054460399 RT4 Chisel tip 1.5mm 0.4mm 0054460499 0054460299 RT5 Chisel tip bent 30 0.8mm RT6 Round tip 45 sloped 1.2mm 0054460699 RT7 Knife tip 45 sloped 2.2mm 0054460799 0054460599 RT8 Chisel tip 2.2mm 0.4mm 0054460899 RT9 Chisel tip 0.8mm 0.4mm 0054460999 RT10GW Gull wing 1.2mm 2.0mm 0054461099 RT11 Chisel tip 3.6mm 0.9mm 0054461199 Type K Thermocouple Assembly 1.5mm 0.4mm Type Description LT 1SC LT H LT A LT B LT C LT D MPR80 (page 11) Width A Thickness B Length Order No. Chisel Chisel Chisel Chisel Chisel Chisel 0.4mm 0.8mm 1.6mm 2.4mm 3.2mm 4.6mm 0.14mm 0.4mm 0.7mm 0.8mm 0.8mm 0.8mm 15.0mm 13.5mm 13.5mm 13.5mm 13.5mm 13.5mm LT1SC LTH LTA LTB LTC LTD LT K LT L LT M Chisel long Chisel long Chisel long 1.2mm 2.0mm 3.2mm 0.4mm 1.0mm 1.2mm 21.0mm 21.0mm 21.0mm LTK LTL LTM LT HX LT ALX LT BX Chisel bent Chisel bent Chisel bent 0.8mm 1.6mm 2.4mm 0.4mm 0.7mm 0.8mm 18.0mm 18.0mm 18.0mm LTHX LTALX LTBX LT AX LT 4X Chisel bent Chisel bent 30 1.6mm O 1.2mm 0.8mm 0.4mm 13.5mm 16.5mm LTAX LT4X LT 1S LT 1SA LT 1A Round slim O 0.2mm O 0.5mm O 0.5mm -- 15.0mm 16.0mm 14.0mm LT1S LT1SA LT1A LT 1 LT AS LT CS Round Round Round 14.0mm 13.5mm 13.5mm LT1 LTAS LTCS LT 1SLX Round slim bent 30 O 2.0mm 20.5mm LT1SLX LT 1X Round bent 30 O 0.4mm 12.5mm LT1X LT 4 Round sloped 45 slim O 1.2mm 15.0mm LT4 LT F Round sloped 45 O 1.2mm 13.5mm LTF LT BB LT CC Round sloped 45 long Round sloped 45 long 18.0mm 18.0mm LTBB LTCC 0054461299 RT2 0.4mm WP80 (page 10) O 0.25mm O 1.6mm O 3.2mm O 0.4mm K1101 2.4mm 3.2mm 4.0mm 6.0mm Use only Weller(R) soldering tips. The use of non-Weller(R) components may void product warranty if the non-Weller(R) component causes damage to the unit. All Weller "Longlife" tips are designed for working with leadfree application Use only Weller(R) soldering tips. The use of non-Weller(R) components may void product warranty if the non-Weller(R) component causes damage to the unit. 18 19 Soldering Tips Soldering Tips for WSP80, WP80 and MPR80 for micro soldering pencil WMP WSP80 (page 11) WP80 (page 10) MPR80 (page 11) WMP (page 11) Type Description Width A LT 1L LT S Conical long Conical long O 0.2mm O 0.4mm Thickness B Length Order No. 26.4mm 21.0mm LT1L LTS NT-Tip LT 1LX Conical long bent O 0.2mm LT GW Gull wing 45 O 2.3mm LT KN Knife tip 6.2mm Type K Thermocouple Assembly 2.4mm Type K Thermocouple Assembly for WP80 2.4mm 26.4mm LT1LX 18.8mm LTGW 16.0mm LTKN 0.8mm 13.5mm K181 0.8mm 13.5mm K1111 3.2mm Description Width A Thickness B Length C Type/Order No. Chisel tip 0.4mm 0.8mm 1.2mm 1.6mm 1.6mm 2.4mm 3.2mm 4.0mm 0.15mm 0.4mm 0.4mm 0.4mm 0.4mm 0.8mm 0.8mm 0.8mm 14.0mm 8.4mm 8.4mm 9.5mm 7.4mm 7.8mm 8.2mm 8.6mm NT1SC NTH NTK NTA NT6 NTB NTC NTD Chisel tip, bent Round tip, bent 45 1.6mm O 0.4mm 0.4mm 8.2mm 8.6mm NTAX NT1X Round tip O 0.25mm - 7.4mm NT1 Round tip slim O 0.25mm - 8.5mm NT1S Round tip, sloped 45 O 1.2mm - 9.9mm NT4 Gull wing 2.0mm 3.0mm 13.4mm NTGW Type K Thermocouple Assembly 2.4mm 0.8mm 7.8mm K191 All Weller "Longlife" tips are designed for working with leadfree application Use only Weller(R) soldering tips. The use of non-Weller(R) components may void product warranty if the non-Weller(R) component causes damage to the unit. SMT soldering tip for reworks on SMT compontents Type Description Width A Thickness B Length C Order No. B C A 20 LT SMT01 LT SMT02 LT SMT03 Blade Blade Blade 10.4mm 16.8mm 20.8mm 0.6mm 0.6mm 0.6mm 7.1mm 7.1mm 7.1mm LTSMT01 LTSMT02 LTSMT03 Use only Weller(R) soldering tips. The use of non-Weller(R) components may void product warranty if the non-Weller(R) component causes damage to the unit. 21 Additional Safety Rests Soldering Tips for soldering iron WSP150 Safety rests with Stop+Go Function WSP150 (page 11) Type Description LHT C LHT D LHT E LHT F Chisel LHT DX LHT EX LHT FX Chisel bent LHT D 45 Sloped 45 for solar panel production Width A Thickness B Order No. 1.2mm 1.8mm 1.8mm 1.8mm 0054445599 0054445299 0054445199 0054445099 5mm 7mm 9mm 2mm 2mm 2mm 0054446299 0054446199 0054446099 5mm - 0054445699 3.2mm 5.0mm 7.0mm 9.3mm The safety rests with Stop+Go function have an integrated micro switch which is activated when the soldering iron is picked up or put down. The operator can decide between an immediate or delayed (20 min) temperature reduction (SETBACK) to 150C (300F) and program the power unit accordingly. For digital Soldering units only. WMPT Soldering Set (0053315999) Use only Weller(R) soldering tips. The use of non-Weller(R) components may void product warranty if the non-Weller(R) component causes damage to the unit. Consisting of WMP Soldering Iron and WDH 20T Safety rest with Stop + Go function. Standard Safety rests complete with sponge 22 WDH10 (0051512199) WDH20 (0051512299) WDH30 (0051515299) Safety rest for WP80 Micro soldering pencil and WSP80 Micro soldering pencil Safety rest for WMP Micro soldering pencil Safety rest for HAP200 Hot air pencil, HAP1 Hot air pencil, DSX80 Desoldering iron, and WSP150 Soldering iron 23 Accessories WDH40 (0051515399) WDH50 (0051515699) WDC2 Dry Cleaner (0051512599) Tip Activator (0051303199) Soft solution for cleaning from lead free solder with metal wool. Replacement wools 0051382499 (2 pcs.) Soft solution for cleaning from lead free solder with metal wool. For WDH safety rests. Replacement wools 0051382499 (2 pcs.) For regeneration of oxidized tips, works fast and easy with low temperature. Environmentally safe, no halides, lead, rosin or residue. Regular use will prolong life time of the tips. Cleaning Tool (0051350099) Service Set (0051312499) Barrel for Soldering Iron WSP80 and WP80 For cleaning of desoldering nozzles and for nozzle exchange. Spare filter for Desoldering iron DSX80 (available as of the third quarter 2007) Barrel for WSP80 0058744710 Barrel long for WP80 (55mm) 0058744846 Barrel short for WP80 (40mm) 00 8744845 WMRTH (0051514699) Safety rest for DXV80 Desoldering iron Safety rest for WMRP Micro soldering pencil with Stop + Go function Safety rest for WMRT with Stop + Go function WDH10T (0051516199) WDH20T (0051516299) KH25P (0051503399) Safety rest for WMP Micro soldering pencil with Stop + Go function Safety rest for MPR80 Peritronic soldering pencil Safety rest for WP80 and WSP80 Micro soldering pencil with Stop + Go function WDC Dry Cleaner (0051512499) AK51 (0051504299) Cartridge (0058741815) Polishing Bar (WPB1) Sponge (0052241999) Spare cartridge for Desoldering iron DXV80 (5 pieces) Grindstone for removal of compact oxid films Dimensions 70 x 55 x 16mm (5 pcs.) Safety rest for WTA50 Tweezer 24 25 Matrix Weller brings to the market an extended generation of versatile soldering / desoldering and hot air tools. Performance has been increased with soldering irons and desoldering irons up to 200 W. The Weller WR3M station easily connects to a variety of new and existing Weller tools and accessories to provide even greater flexibility. The matrix below makes selection easy, and puts you firmly in control of all your workbench needs. 26 Order No. Soldering Tip Included HAP200 Hot Air Pencil (WDH30 Safety rest for HAP200) 0052711799 None HAP1 Hot Air Pencil (WDH30 Safety rest for HAP1) 0053311499 R 06 WMP Micro Soldering Pencil 65 W (WDH20 Safety rest for WMP) 0053315999 NT 1 DSX80 Desoldering Iron 80 W (WDH30 Safety rest for DSX80) 0053313899 DX 113HM DXV80 Desoldering Iron 80 W (WDH40 Safety rest for DXV80) 0051318299 DX 113HM WMRP Soldering Pencil (WDH50 Safety rest for WMRP) 0052918399 RT 3 WP80 Micro Soldering Pencil 80 W (WDH10 Safety rest for WP80) 0052918199 LTB WSP150 Soldering Iron 150 W (WDH30 Safety rest for WSP150) 0053313599 LHTF WSP80 Micro Soldering Pencil 80 W (WDH10 Safety rest for WSP80) 0053312599 LTB MPR80 Antistatic Peritronic soldering pencil set (KH25P Safety rest for MPR80) 0053313199 LTB WMRT Tweezer (WDH60 Safety rest for WMRT) 0051317399 RTW 2 WSB80 Solder Bath 0052704099 WTA50 Tweezer (AK51 Safety rest for WTA50) 0053313399 WSB150 Solder Bath 0052704299 WHP80 Preheating Plate 0052702899 WR3M N/A WTA 1 N/A N/A 27 P.O. Box 728 Apex, NC 27502 www.cooperhandtools.com CHT07-11383/MW/?????/10M/PRINTED 07/07/USA COOPER NO. 550664 (c) 2007, Cooper Industries, LLC Specifications subject to change without notice.