Rev.0 Aug. 01, 2008 page 1 of 4
HL6362MG/63MG
Low Operating Current Visible Laser Diode ODE2026-00 (M)
Rev.0
Aug. 01, 2008
Description
The HL6362M G/6 3M G are 0.63 μm band AlGaInP laser diodes with a multi-quantum well (MQW) structure. They are
suitable as light sources for laser display, laser scanners and optical equipment for measurement.
Features
Visible light output: 640 nm Typ
Single longitudinal mode
Optical output power: 40 mW CW
Low operating current: 90 mA Typ
Low operating vol t age: 2.6 V Max
Operating temperature: +50°C
TE mode oscillation
LDPD
13
Internal Circuit
HL6362MG Internal Circuit
HL6363MG
Package Type
HL6362MG/63MG: MG
LDPD
13
22
Absolute Maximum Ratings
(TC = 25°C)
Item Symbol Ratings Unit
Optical output power PO 45 mW
LD reverse voltage VR(LD) 2 V
PD reverse voltage VR(PD) 30 V
Operating temperature Topr –10 to +50 °C
Storage temperature Tstg –40 to +85 °C
Optical and Electrical Characteristics
(TC = 25°C)
Item Symbol Min Typ Max Unit Test Condition
Threshold current Ith — 45 60 mA
Operating current IOP90 110 mA PO = 40 mW
Operating voltage VOP2.4 2.6 V PO = 40 mW
Beam divergence
parallel to the junction θ// 7 10 13 ° PO = 40 mW
Beam divergence
perpendicular to the junction θ⊥ 16 21 24 ° PO = 40 mW
Lasing wavelength λp — 640 643 nm PO = 40 mW
Monitor current IS 0.15 0.30 0.60 mA PO = 40 mW ,VR(PD) = 5 V
HL6362MG/63MG
Rev.0 Aug. 01, 2008 page 2 of 4
Typical Characteristic Curves
Slope Efficiency vs. Case Temperature
Case temperature, T
C
(°C)
Case temperature, T
C
(°C)
050
40
30
20
10
050
40
30
20
10
Slope efficiency, ηs (mW/mA)
0
0.2
0.4
0.6
0.8
1.4
Optical output power, P
O
(mW)
50
30
10
00100
Forward current, I
F
(mA)
Opticai Output Power vs. Forward Current 100
10
Threshold current, Ith (mA)
Threshold Current vs. Case Temperature
75
25
40
20
50 125
Monitor Current vs. Case Temperature
010 20 30 40
Monitor current, I
S
(mA)
0
0.2
0.3
0.4
0.5
50
Case temperature, T
C
(°C)
0.6
Lasing Wavelength vs. Case Temperature
Lasing wavelength, λp (nm)
630
635
645
650
640
010 20 30 40 50
Case temperature, T
C
(°C)
P
O
= 40mW
150 175
T
C
= 0°C
25°C
50°C
40°C
50
1.2
1.0
0.1
P
O
= 40mW
V
R(PD)
= 5V
Relative intensity
Angle, θ ( ° )
Far Feild Pattern
–40 –10 0 10 20 30–20–30 40
1.0
0.8
0.6
0.4
0.2
0
P
O
= 40mW
T
C
= 25°C Perpendicular
Parallel
HL6362MG/63MG
Rev.0 Aug. 01, 2008 page 3 of 4
Package Dimensions
OPJ Code
JEDEC
JEITA
Mass
(reference value)
LD/MG
0.3 g
1
2
3
5.6
+0
–0.025
φ
1.0 ± 0.1
(0.4)
(90°)
1.6 ± 0.2
φ
0.4
+0.1
–0
φ
φ
4.1 ± 0.3
3.55 ± 0.1
0.25
Glass
1.27
φ
3 – 0.45 ± 0.1
6.5 ± 1.0
1.2 ± 0.1 2.3 ± 0.2
φ
123
2.0 ± 0.2
Emitting Point
As of July, 2002
Unit: mm
HL6362MG/63MG
Rev.0 Aug. 01, 2008 page 4 of 4
Cautions
1. Opnext Japan,Inc.(OPJ) neither warrants nor grants licenses of any our rights or an y third party’s patent, copyright,
trademark, or other intellectual property rights for information contained in this document. OPJ bears no
responsibility for problems that may arise with third party’s rights, includin g intellectual property rights, in
connection with use of the information contained in this document.
2. Products and product specifications may be subject to change without notice. Confirm that you have received the
latest product standards or specifications before final design, purchase or use.
3. OPJ makes every attempt to ensure that its products are of high quality and reliability. However, contact o ur sales
office before using the product in an application that demands especially high qua lity and reliability or where its
failure or malfunction may directly threaten hum an life or cause risk of bodily injury, such as aerospace,
aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for
life support.
4. Design your application so that the product is used within the ranges guaranteed by OPJ particularly for maximum
rating, operating supply voltage range, heat radiation characteristics, installation conditions and oth er characteristics.
OPJ bears no responsibility for failure or damage wh en used beyond the guaranteed ranges. Even within the
guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and
employ systemic measures such as fail-safes, so that the equipment incorporating OPJ product does not cause bodily
injury, fire or other consequential damage due to operation of the OPJ product.
5. This product is not designed to be radiation resistant.
6. No one is permitted to rep roduce or duplicate, in any form, the whole or part of this document without written
approval from OPJ.
7. Contact our sales office for any questions regarding this document or OPJ products.
1. The laser light is harmful to human body especially to eye no matter what directly or indirectly. The laser beam
shall be observed or adjusted through infrared camera or equivalent.
2. This product contains gallium arsenide (GaAs), which may seriously endanger your health even at very low doses.
Please avoid treatment which may create GaAs powder or gas, such as disassembly or performing chemical
experiments, when you handle the product.
When disposing of the product, please follow the laws of your country and separate it from other waste such as
industrial waste and household garbage.
3. Definition of items shown in this CAS is in accordance with that shown in Opto Device Databook issued by OPJ
unless otherwise specified.
Sales Offices
Op
next Ja
p
an, Inc
.
Taka
g
i Bld
g
., 3F, 1-3-9, Iwamoto-cho, Chi
y
oda-ku, Tok
y
o 101-0032, Japan
Tel: (03) 3865-5591
For the detail of Opnext, Inc., see the following homepage:
©2008 Opnext Japan, Inc., All rights reserved. Printed in Japan.
Colophon 5.0
Japan (Japanese) http://www.opnext.com/jp/products/
Other area (English) http://www.opnext.com/products/