Preliminary Datasheet BCR1AM-12A R07DS0177EJ0500 Rev.5.00 Aug 03, 2015 600V-1A-Triac Low Power Use Features IT (RMS) : 1 A VDRM : 600 V IFGTI , IRGTI, IRGT III : 7 mA Non-Insulated Type Planar Passivation Type Halogen-free options available (#BD0) Outline RENESAS Package code: PRSS0003EA-A (Package name: TO-92*) RENESAS Package code: PRSS0003DJ-A (Package name: TO-92) 2 1. T1 Terminal 2. T2 Terminal 3. Gate Terminal 3 1 3 1 2 1 3 2 Applications Washing machine, electric fan, air purifier, electric pot, rice-cooker, electric blanket, refrigerator, Solid State Relay, and other general purpose AC control applications Maximum Ratings Parameter Voltage class Symbol Repetitive peak off-state voltageNote1 Non-repetitive peak off-state voltageNote1 VDRM VDSM Parameter RMS on-state current Symbol IT (RMS) Ratings 1.0 Unit A Surge on-state current ITSM 10 A I2t 0.41 A2 s PGM PG (AV) VGM IGM Tj Tstg -- 1 0.1 6 0.5 - 40 to +125 - 40 to +125 0.23 W W V A C C g I2t for fusing Peak gate power dissipation Average gate power dissipation Peak gate voltage Peak gate current Junction temperature Storage temperature Mass Unit 12 600 720 V V Conditions Commercial frequency, sine full wave 360 conduction, Tc = 56CNote3 60Hz sinewave 1 full cycle, peak value, non-repetitive Value corresponding to 1 cycle of half wave 60Hz, surge on-state current Typical value Notes: 1. Gate open. R07DS0177EJ0500 Rev.5.00 Aug 03, 2015 Page 1 of 7 BCR1AM-12A Preliminary Electrical Characteristics Parameter Symbol Repetitive peak off-state current On-state voltage Rated value IDRM VTM Min. -- -- Typ. -- -- Max. 0.5 1.6 Unit mA V Test conditions Tj = 125C, VDRM applied Tc = 25C, ITM = 1.5 A, Instantaneous measurement Gate trigger voltageNote2 VFGT VRGT VRGT -- -- -- -- -- -- 2.0 2.0 2.0 V V V Tj = 25C, VD = 6 V, RL = 6 , RG = 330 Gate trigger currentNote2 IFGT IRGT IRGT VGD Rth (j-c) -- -- -- 0.1 -- -- -- -- -- -- 7 7 7 -- 50 mA mA mA V C/W Tj = 25C, VD = 6 V, RL = 6 , RG = 330 Tj = 125C, VD = 1/2 VDRM Junction to caseNote3 (dv/dt)c 2 -- -- V/s Tj = 125C Gate non-trigger voltage Thermal resistance Critical-rate of rise of off-state commutating voltageNote4 Notes: 2. Measurement using the gate trigger characteristics measurement circuit. 3. Case temperature is measured at the T2 terminal 1.5 mm away from the molded case. 4. Test conditions of the critical-rate of rise of off-state commutating voltage is shown in the table below. Test conditions 1. Junction temperature Tj = 125C 2. Rate of decay of on-state commutating current (di/dt)c = - 0.5 A/ms 3. Peak off-state voltage VD = 400 V R07DS0177EJ0500 Rev.5.00 Aug 03, 2015 Commutating voltage and current waveforms (inductive load) Supply Voltage Time Main Current (di/dt)c Time Main Voltage (dv/dt)c Time VD Page 2 of 7 BCR1AM-12A Preliminary Performance Curves 102 7 Tj = 25C 5 3 2 Rated Surge On-State Current 10 Surge On-State Current (A) On-State Current (A) Maximum On-State Characteristics 101 7 5 3 2 100 7 5 3 2 2 3 4 5 7 101 2 3 4 5 7 102 Gate Characteristics Gate Trigger Current vs. Junction Temperature VGM = 6V PG(AV) = 0.1W PGM = 1W IGM = 0.5A IFGT I IRGT I IRGT III VGD = 0.1V 10-2 100 2 3 5 7 101 2 3 5 7 102 2 3 5 7 103 Gate Trigger Voltage (Tj = tC) x 100 (%) Gate Trigger Voltage (Tj = 25C) 2 Conduction Time (Cycles at 60Hz) Gate Trigger Current (Tj = tC) x 100 (%) Gate Trigger Current (Tj = 25C) 10-1 7 5 3 2 4 On-State Voltage (V) 103 7 5 4 3 2 Typical Example IFGT I, IRGT I 102 7 5 4 3 2 IRGT III 101 -60 -40 -20 0 20 40 60 80 100 120 140 Gate Current (mA) Junction Temperature (C) Gate Trigger Voltage vs. Junction Temperature Maximum Transient Thermal Impedance Characteristics (Junction to case, Junction to ambient) 103 7 5 4 3 2 Typical Example VFGT I, VRGT I 102 7 5 4 3 2 VRGT III 101 -60 -40 -20 0 20 40 60 80 100 120 140 Junction Temperature (C) R07DS0177EJ0500 Rev.5.00 Aug 03, 2015 Transient Thermal Impedance (C/W) Gate Voltage (V) 100 7 5 3 2 6 0 100 10-1 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 101 7 5 3 2 8 102 2 3 5 7 103 2 3 5 7 104 2 3 5 7 105 103 7 5 3 2 Junction to ambient 102 7 5 Junction to case 3 2 101 7 5 3 2 100 10-1 2 3 5 7 100 2 3 5 7 101 2 3 5 7 102 Conduction Time (Cycles at 60Hz) Page 3 of 7 BCR1AM-12A Preliminary Allowable Case Temperature vs. RMS On-State Current Maximum On-State Power Dissipation 1.6 1.2 0.8 0.4 0 360 Conduction Resistive, inductive loads 0 0.4 1.2 1.6 2.0 120 100 80 60 40 360 Conduction 20 Resistive, inductive loads 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Allowable Ambient Temperature vs. RMS On-State Current Repetitive Peak Off-State Current vs. Junction Temperature Curves apply regardless of conduction angle Resistive, inductive loads Natural convection 120 100 80 60 40 20 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 RMS On-State Current (A) 105 7 Typical Example 5 3 2 104 7 5 3 2 103 7 5 3 2 102 -60 -40 -20 0 20 40 60 80 100 120 140 Junction Temperature (C) Latching Current vs. Junction Temperature Holding Current vs. Junction Temperature 103 7 5 4 3 2 Typical Example Latching Current (mA) Holding Current (Tj = tC) x 100 (%) Holding Current (Tj = 25C) Curves apply regardless of conduction angle RMS On-State Current (A) 140 0 140 RMS On-State Current (A) 160 Ambient Temperature (C) 0.8 Case Temperature (C) 160 Repetitive Peak Off-State Current (Tj = tC) x 100 (%) Repetitive Peak Off-State Current (Tj = 25C) On-State Power Dissipation (W) 2.0 102 7 5 4 3 2 101 -60 -40 -20 0 20 40 60 80 100 120 140 Junction Temperature (C) R07DS0177EJ0500 Rev.5.00 Aug 03, 2015 102 7 5 3 2 Distribution T2+, G- Typical Example 101 7 5 3 2 100 7 5 3 2 T2+, G+ Typical Example T2-, G- 10-1 -60 -40 -20 0 20 40 60 80 100 120 140 Junction Temperature (C) Page 4 of 7 BCR1AM-12A Preliminary Breakover Voltage (dv/dt = xV/s) x 100 (%) Breakover Voltage (dv/dt = 1V/s) 160 Typical Example 140 120 100 80 60 40 20 0 -60 -40 -20 0 20 40 60 80 100120 140 101 7 5 4 3 2 Typical Example Tj = 125C 140 120 I Quadrant 100 80 60 40 III Quadrant 20 0 100 2 3 5 7 101 2 3 5 7 102 2 3 5 7 103 Commutation Characteristics Gate Trigger Current vs. Gate Current Pulse Width III Quadrant Minimum Characteristics Value I Quadrant 10-1 -1 10 160 Rate of Rise of Off-State Voltage (V/s) Typical Example Tj = 125C IT = 1A = 500s VD = 200V 100 7 5 4 3 2 Breakover Voltage vs. Rate of Rise of Off-State Voltage Junction Temperature (C) Gate Trigger Current (tw) x 100 (%) Gate Trigger Current (DC) Critical Rate of Rise of Off-State Commutating Voltage (V/s) Breakover Voltage (Tj = tC) x 100 (%) Breakover Voltage (Tj = 25C) Breakover Voltage vs. Junction Temperature 2 3 4 5 7 100 2 3 4 5 7 101 Rate of Decay of On-State Commutating Current (A/ms) 103 7 5 4 3 2 102 7 5 4 3 2 101 0 10 Typical Example IFGT I IRGT III IRGT I 2 3 4 5 7 101 2 3 4 5 7 102 Gate Current Pulse Width (s) Gate Trigger Characteristics Test Circuits 6 6 A 6V V A 6V 330 Test Procedure I V 330 Test Procedure II 6 A 6V V 330 Test Procedure III R07DS0177EJ0500 Rev.5.00 Aug 03, 2015 Page 5 of 7 BCR1AM-12A Preliminary Package Dimensions Package Name TO-92* JEITA Package Code SC-43A RENESAS Code PRSS0003EA-A Previous Code T920 MASS[Typ.] 0.23g Unit: mm 5.0Max 11.5Min 5.0Max 4.4 1.25 1.25 3.6 1.1 Circumscribed circle 0.7 JEITA Package Code RENESAS Code Previous Code MASS (Typ) [g] SC-43A PRSS0003DJ-A TO-92 0.23 Unit: mm +0.25 14.47 0.4 4.58 0.2 4.58 -0.15 +0.10 0.46 0.1 0.38 -0.05 (3.86 MAX) 1.02 0.1 1.27 R07DS0177EJ0500 Rev.5.00 Aug 03, 2015 Page 6 of 7 BCR1AM-12A Preliminary Ordering Information Orderable Part Number BCR1AM-12A#C01 BCR1AM-12A-A6#C01 BCR1AM-12A-TB#C01 BCR1AM-12A#BD0 Packing Note5 Quantity Remark Quality Grade Note7 TO-92* TO-92* TO-92* TO-92 Plastic Bag Plastic Bag Adhesive Tape Plastic Bag 500 pcs. 500 pcs. 2000 pcs. 1000 pcs. General Industrial & Consumer Use General Industrial & Consumer Use General Industrial & Consumer Use General Industrial & Consumer Use BCR1AM-12A-A6#BD0 TO-92 Plastic Bag 1000 pcs. BCR1AM-12A#FD0 BCR1AM-12A-A6#FD0 TO-92 TO-92 Plastic Bag Plastic Bag 1000 pcs. 1000 pcs. Straight type A6 Lead form A8 Lead form Straight type Halogen-free A6 Lead form Halogen-free Straight type A6 Lead form Package General Industrial & Consumer Use Special Consumer Use Note6 Special Consumer Use Note6 Notes: 5. Please confirm the specification about the shipping in detail. 6. "Special Consumer Use" grade product is not tested for the "Temperature Humidity Bias" reliability in the condition of rated VDRM. Please be sure to implement qualification tests and judge whether the product meets your criteria. If necessary, please apply moisture-proof measures according to user's conditions. 7. For further details about the classification in the Standard quality grade, please refer to the application note. R07DS0177EJ0500 Rev.5.00 Aug 03, 2015 Page 7 of 7 Notice 1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics 3. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Renesas Electronics assumes no responsibility for any losses incurred by you or 5. Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product. the product's quality grade, as indicated below. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by Renesas Electronics. 6. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. 8. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. It is the responsibility of the buyer or distributor of Renesas Electronics products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, Renesas Electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products. 11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. http://www.renesas.com SALES OFFICES Refer to "http://www.renesas.com/" for the latest and detailed information. Renesas Electronics America Inc. 2801 Scott Boulevard Santa Clara, CA 95050-2549, U.S.A. Tel: +1-408-588-6000, Fax: +1-408-588-6130 Renesas Electronics Canada Limited 9251 Yonge Street, Suite 8309 Richmond Hill, Ontario Canada L4C 9T3 Tel: +1-905-237-2004 Renesas Electronics Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K Tel: +44-1628-585-100, Fax: +44-1628-585-900 Renesas Electronics Europe GmbH Arcadiastrasse 10, 40472 Dusseldorf, Germany Tel: +49-211-6503-0, Fax: +49-211-6503-1327 Renesas Electronics (China) Co., Ltd. Room 1709, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100191, P.R.China Tel: +86-10-8235-1155, Fax: +86-10-8235-7679 Renesas Electronics (Shanghai) Co., Ltd. Unit 301, Tower A, Central Towers, 555 Langao Road, Putuo District, Shanghai, P. R. China 200333 Tel: +86-21-2226-0888, Fax: +86-21-2226-0999 Renesas Electronics Hong Kong Limited Unit 1601-1611, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong Tel: +852-2265-6688, Fax: +852 2886-9022 Renesas Electronics Taiwan Co., Ltd. 13F, No. 363, Fu Shing North Road, Taipei 10543, Taiwan Tel: +886-2-8175-9600, Fax: +886 2-8175-9670 Renesas Electronics Singapore Pte. Ltd. 80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre, Singapore 339949 Tel: +65-6213-0200, Fax: +65-6213-0300 Renesas Electronics Malaysia Sdn.Bhd. Unit 1207, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: +60-3-7955-9390, Fax: +60-3-7955-9510 Renesas Electronics India Pvt. Ltd. No.777C, 100 Feet Road, HALII Stage, Indiranagar, Bangalore, India Tel: +91-80-67208700, Fax: +91-80-67208777 Renesas Electronics Korea Co., Ltd. 12F., 234 Teheran-ro, Gangnam-Gu, Seoul, 135-080, Korea Tel: +82-2-558-3737, Fax: +82-2-558-5141 (c) 2015 Renesas Electronics Corporation. All rights reserved. Colophon 5.0