HTCM-SCE HIGH TEMPERATURE CABLE MARKER TECHNICAL DATASHEET TTDS-022 Revision 3, September 2014 HTCM-SCE Cable Markers are flat, non-adhesive labels that can be used to identify large cables and wire bundles in particularly aggressive environments. Cable Markers can be applied post cable termination using cable ties. Manufactured using a specially developed radiation cross-linked fluoropolymer, and formulated to give High Temperature, and Low Out Gassing performance which allows this product to be used in extreme environments, including space application. Suitable for Mass Transit, Military, Aerospace and Heavy Industrial applications. Cable Markers are available as part of a complete printing system from TE Connectivity. The system comprises of specific printers, ink cartridges and WINTOTAL software. This product is printed using a dot matrix system, also available is HTCM-SCE-TP for thermal transfer printing. PAGE 1 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 RAIL /// TTDS-022 - HTCM-SCE CABLE MARKER TE Proprietary Information TECHNICAL DATA SHEET TTDS-022 Features High temperature performance Self-extinguishing, non-flame Low vacuum out gassing identification marker - suitable for use on Spacecraft propagating Resistant to key military, aviation, rail and heavy industrial fluids (defined by RW-2524) Applications Post termination Cable Identification Identification of large cables, wire bundles or pipework Installation friendly - easy to replace, ideal for retrofitting and repairs. Cable ties are required for fixing Mass transit, Rail, Aerospace, Marine and Heavy Industrial Temperature Rating Operating Temperature Range -55C to 225C (-67F to 437F) Environmental Does not contain any declarable or prohibited substances from the UNIFE Railway Industry Substances List Does not promote mould growth (ASTM G21 - zero rating) No evolution of substances which may corrode electrical conductors or contacts - up to 200C (392F) Further information and a downloadable declaration covering RoHS and REACH compliance can be found at the `TE Product Compliance Support Centre': http://www.te.com/en/resources/product-compliance.html Specifications / Approvals TE Connectivity Standard RW-2524 Rail EN45545-2, Hazard Classification 3, In accordance with requirement set R24 Aerospace Airbus Directive ABD0031 Issue F, Fire worthiness requirements pressured section of fuselage, (15 s horizontal test - AITM 2.0003) Where possible, TE has tested product as a finished item, including the print. Operational tests are followed by an assessment of mark adherence to validate fit form and function. Further details can be found in TE standard RW-2524. PAGE 2 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 RAIL /// TTDS-022 - HTCM-SCE CABLE MARKER TE Proprietary Information TECHNICAL DATA SHEET TTDS-022 Part Description HTCM-SCE -2.5K -1/4 -4H -9 9 Colour 4H Cable tie fixing holes 1/4 Printable height of marker 2.5K Pack size HTCM-SCE Product family 4 Hole Position 4 hole option 12.7 (0.5) 25.4 (1.0) 20.0 (0.78) 10.4 (0.4) PERFORATION LINE (TEXTURED SURFACE) Available as a 4 hole option only 38.1 (1.5) 6 hole option PERFORATION LINE (TEXTURED SURFACE) 6 Hole Position 1/4 inch product 38.1 (1.5) Dimensions in mm (inches) 1/2 inch product Ordering Information Description Cable tie fixing holes Code Standard pack size Code Non standard pack size Code Standard colour Code Standard colour Code HTCM-SCE-1/4-4H-<colour> 4 4H 250 pieces Omit 2500 pieces 2.5K White 9 Yellow 4 HTCM-SCE-1/2-4H-<colour> 4 4H 250 pieces Omit 2500 pieces 2.5K White 9 Yellow 4 HTCM-SCE-1/2-6H-<colour> 6 6H 250 pieces Omit 2500 pieces 2.5K White 9 Yellow 4 Specify product name, pack size, height (inches), pack size (omit if standard), fixing holes and colour e.g. HTCM-SCE-2.5K-1/4-4H-9 PAGE 3 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 RAIL /// TTDS-022 - HTCM-SCE CABLE MARKER TE Proprietary Information TECHNICAL DATA SHEET TTDS-022 Printer Information Print quality and print performance can only be guaranteed when specific TE printer and ribbons are used. The current list of printers and ribbons can be found in TE document 411-121005 `Identification Printer Product Ribbon Matrix'. This document can be found at the TE document centre: http://www.te.com/commerce/DocumentDelivery/ Software Cable Markers are fully supported by WINTOTAL and PrintEasy label printing software, available from the TE product store: http://www.te.com/en/general/label-printing-software.html Contact a TE representative for further information te.com TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity`s obligations shall only be as set forth in TE Connectivity`s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. (c) 2014 TE Connectivity Ltd. family of companies All Rights Reserved. CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 RAIL /// TTDS-022 - HTCM-SCE CABLE MARKER PAGE 4 TE Proprietary Information Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: HTCM-SCE-TP-1/4-4H-9