RAIL /// TTDS-022 – HTCM-SCE CABLE MARKER
PAGE 1
CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 TE Proprietary Information
HTCM-SCE
HIGH TEMPERATURE
CABLE MARKER
HTCM-SCE Cable Markers are flat, non-adhesive labels that can be used to identify large cables
and wire bundles in particularly aggressive environments. Cable Markers can be applied post
cable termination using cable ties.
Manufactured using a specially developed radiation cross-linked fluoropolymer, and formulated to
give High Temperature, and Low Out Gassing performance which allows this product to be used
in extreme environments, including space application.
Suitable for Mass Transit, Military, Aerospace and Heavy Industrial applications.
Cable Markers are available as part of a complete printing system from TE Connectivity. The
system comprises of specific printers, ink cartridges and WINTOTAL software.
This product is printed using a dot matrix system, also available is HTCM-SCE-TP for thermal
transfer printing.
TECHNICAL DATASHEET
TTDS-022 Revision 3, September 2014
RAIL /// TTDS-022 – HTCM-SCE CABLE MARKER
PAGE 2
CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 TE Proprietary Information
Where possible, TE has tested product as a finished item, including the print. Operational tests are followed by an
assessment of mark adherence to validate fit form and function. Further details can be found in TE standard RW-2524.
TECHNICAL DATA SHEET
TTDS-022
High temperature performance
Low vacuum out gassing identification
marker - suitable for use on Spacecraft
Self-extinguishing, non-flame
propagating
Resistant to key military, aviation, rail
and heavy industrial fluids (defined by
RW-2524)
Features
Applications
Post termination Cable Identification
Identification of large cables, wire bundles or pipework
Installation friendly – easy to replace, ideal for retrofitting and repairs. Cable ties are required for fixing
Mass transit, Rail, Aerospace, Marine and Heavy Industrial
Environmental
Does not contain any declarable or prohibited substances from the UNIFE Railway Industry
Substances List
Does not promote mould growth (ASTM G21 – zero rating)
No evolution of substances which may corrode electrical conductors or contacts – up to 200°C (392°F)
Further information and a downloadable declaration covering RoHS and REACH compliance can be
found at the ‘TE Product Compliance Support Centre’:
http://www.te.com/en/resources/product-compliance.html
Temperature Rating
Operating Temperature Range -55°C to 225°C (-67°F to 437°F)
Specifications / Approvals
TE Connectivity Standard RW-2524
Rail EN45545-2, Hazard Classification 3,
In accordance with requirement set R24
Aerospace Airbus Directive ABD0031 Issue F, Fire worthiness require-
ments pressured section of fuselage, (15 s horizontal test –
AITM 2.0003)
RAIL /// TTDS-022 – HTCM-SCE CABLE MARKER
PAGE 3
CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 TE Proprietary Information
Specify product name, pack size, height (inches), pack size (omit if standard), fixing holes and colour
e.g. HTCM-SCE-2.5K-1/4-4H-9
Part Description
HTCM-SCE -2.5K -1/4 -4H -9
9 Colour
4H Cable tie fixing holes
1/4 Printable height of marker
2.5K Pack size
HTCM-SCE Product family
Ordering Information
1/4 inch product
1/2 inch product
Description Cable tie
fixing
holes
Code Standard
pack size
Standard
colour
Code Standard
colour
Code
HTCM-SCE-1/4-4H-<colour> 4 4H 250 pieces White 9 Yellow 4
HTCM-SCE-1/2-4H-<colour> 4 4H 250 pieces White 9 Yellow 4
HTCM-SCE-1/2-6H-<colour> 6 6H 250 pieces White 9 Yellow 4
Non standard
pack size
2500 pieces
2500 pieces
2500 pieces
Code
2.5K
2.5K
2.5K
Code
Omit
Omit
Omit
Available as a
4 hole option
only
4 hole option
6 hole option
Dimensions in mm (inches)
TECHNICAL DATA SHEET
TTDS-022
12.7 (0.5)
10.4 (0.4)
38.1 (1.5)
PERFORATION LINE (TEXTURED SURFACE)
20.0 (0.78)
25.4 (1.0)
PERFORATION LINE
(TEXTURED SURFACE)
4 Hole Position
6 Hole Position
38.1 (1.5)
RAIL /// TTDS-022 – HTCM-SCE CABLE MARKER
PAGE 4
CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 TE Proprietary Information
te.com
TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or
company names referred to herein might be trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purpos-
es only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness
and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Con-
nectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any
incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE
Connectivity products should make their own evaluation to determine the suitability of each such product for the specific
application.
© 2014 TE Connectivity Ltd. family of companies All Rights Reserved.
Software
Cable Markers are fully supported by WINTOTAL and
PrintEasy label printing software, available from the TE
product store:
http://www.te.com/en/general/label-printing-software.html
Contact a TE representative for further information
Print quality and print performance can only be
guaranteed when specific TE printer and ribbons are
used.
The current list of printers and ribbons can be found in
TE document 411-121005 ‘Identification Printer Product
Ribbon Matrix’. This document can be found at the TE
document centre:
http://www.te.com/commerce/DocumentDelivery/
Printer Information
TECHNICAL DATA SHEET
TTDS-022
