SPEC NO: DSAD2462 REV NO: V.5 DATE: NOV/29/2005 PAGE: 1 O F 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP:1332000615
Package Dimensions & Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
Description
The High Efficiency Red source color devices are made with
Gallium Arsenide Phosphide on Gallium Phosphide Orange
Light Emitting Diode.
P/N: TC23-11EWA HIGH EFFICIENCY RED
58mm (2.3 INCH) 8x8 DOT MATRIX DISPLAY
Features
2.3 INCH MATRIX HEIGHT.
DOT SIZE 5mm.
LOW CURRENT OPERATION.
HIGH CONTRAST AND LIGHT OUTPUT.
COMPATIBLE WITH ASCII AND EBCDIC CODES.
STACKABLE HORIZONTALLY.
COLUMN CATHODE AND COLUMN ANODE AVAILABLE.
EASY MOUNTING ON P.C. BOARDS OR SOCKETS.
MULTICOLOR AVAILABLE.
MECHANICALLY RUGGED.
STANDARD : GRAY FACE, WHITE DOT.
RoHS COMPLIANT.
SPEC NO: DSAD2462 REV NO: V.5 DATE: NOV/29/2005 PAGE: 2 O F 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP:1332000615
Selection Guide
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Part No. Dice Lens Type Iv (ucd)
@ 10mA
Min. Typ.
TC23-11EWA HIGH EFFICIENCY RED (GaAsP/GaP) WHITE DIFFUSED 1900 8000 Column Cathode
Description
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak Peak Wavelength High Efficiency Red 627 nm IF=20mA
λDDominant Wavelength High Efficiency Red 625 nm IF=20mA
∆λ1/2 Spectral Line Half-width High Efficiency Red 45 nm IF=20mA
C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz
VFForward Voltage High Efficiency Red 2.0 2.5 V IF=20mA
IRReverse Current High Efficiency Red 10 uA VR = 5V
Parameter High Efficiency Red Units
Power dissipation 105 mW
DC Forward Current 30 mA
Peak Forward Current [1] 160 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 5 Seconds
SPEC NO: DSAD2462 REV NO: V.5 DATE: NOV/29/2005 PAGE: 3 O F 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP:1332000615
High Efficiency Red TC23-11EWA
SPEC NO: DSAD2462 REV NO: V.5 DATE: NOV/29/2005 PAGE: 4 O F 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP:1332000615
PACKING & LABEL SPECIFICATIONS TC23-11EWA
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity/ Luminous Flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.