EC26 Series EC26 * RoHS Compliant (Pb-Free) * Ceramic SMD package * 3.3V supply voltage * LVCMOS Output * Stability to 20ppm * Standby Function * Available in tube or tape and reel H 1.6 L 7.0 W 5.0 OSCILLATOR ELECTRICAL SPECIFICATIONS Frequency Range 1.544MHz to 125MHz, 125.00093MHz, 125.00312MHz, 125.009MHz, 125.00937MHz, 125.01MHz, 126MHz, 127MHz, 128MHz, 130MHz, 131.072MHz, 131.25MHz, 132MHz, 133MHz, 133.33MHz, 133.333MHz, 133.3333MHz, 135MHz, 136MHz, 137.472MHz, 140MHz, 142MHz, 142.85MHz, 143MHz, 145MHz, 148.351MHz, 148.3516MHz, 148.5MHz, 150MHz, 155MHz, 155.52MHz, 156.25MHz, 159.375MHz, 159.38MHz, 161.1328MHz, 162.5MHz, 166MHz, 175MHz, 187.5MHz, and 200MHz -10C to 70C Operating Temperature Range -40C to 85C -55C to 125C Storage Temperature Range 3.3VDC 10% Supply Voltage (VDD) 10mA Maximum Input Current 1.544MHz to 32.000MHz 18mA Maximum 32.000001MHz to 50.000MHz 20mA Maximum 50.000001MHz to 70.000MHz 40mA Maximum 70.000001MHz to 125.000MHz 60mA Maximum 125.009MHz to 200.000MHz 100ppm Maximum Frequency Tolerance / Stability Inclusive of all conditions: Calibration Tolerance at 25C, 50ppm Maximum Frequency Stability over the Operating Temperature Range, 25ppm Maximum Supply Voltage Change, Output Load Change, First Year Aging 20ppm Maximum at 25C, Shock, and Vibration 90% of VDD Minimum Output Voltage Logic High (VOH) IOH= -8mA 10% of VDD Maximum Output Voltage Logic Low (VOL) IOL= +8mA Rise / Fall Time Measured at 20% to 80% of Waveform 7nSeconds Maximum with 30pF CMOS Load < 35.000MHz 5nSeconds Maximum with 15pF CMOS Load < 35.000MHz 3nSeconds Maximum with 15pF CMOS Load 35.001MHz to 165.000MHz 2nSeconds Maximum with 15pF CMOS Load > 165.000MHz 50 10(%) (Standard) Duty Cycle at 50% of Waveform with CMOS Load 50 5(%) (Optional) 30pF CMOS Load Maximum Load Drive Capability < 35.000MHz 15pF CMOS Load Maximum > 35.000MHz Enables Output Tri-State Input Voltage No Connection Enables Output VIH :70% of VDD Disables Output: High Impedance VIL :30% of VDD 10A Maximum Standby Current Disabled Output: High Impedance 10 mSeconds Maximum Start Up Time 1pSeconds Maximum RMS Phase Jitter 12kHz to 20MHz offset frequency MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EC26 CERAMIC 3.3V OS30 03/09 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EC26 00 ET T TS - 40.000M TR PACKAGING OPTIONS Blank=Bulk, TR=Tape and Reel (Standard) FREQUENCY TOLERANCE / STABILITY 00=100ppm Maximum (Standard) 45=50ppm Maximum 25=25ppm Maximum 20=20ppm Maximum FREQUENCY OUTPUT CONTROL FUNCTION TS=Tri-State OPERATING TEMPERATURE RANGE Blank=-10C to 70C (Standard) ET=-40C to 85C DUTY CYCLE Blank=50 10(%) (Standard), T=50 5(%) MECHANICAL DIMENSIONS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS Pin 1: Tri-State Pin 2: Case Ground TAPE AND REEL DIMENSIONS Pin 3: Output Pin 4: Supply Voltage Tolerances = 0.1 ALL DIMENSIONS IN MILLIMETERS TAPE A B C D E 16+.3-.1 7.5.1 6.75.1 4 .1 2.1 F M N O P Q 1.5 MIN 50 MIN 20.2 MIN 13.2 40 MIN QTY/REEL 1,000 REEL F G H J K L R S T U V 8.1 B0* 1.5 +.1-0 A0* .3 .05 K0* 2.5 MIN 10 MIN 22.4 MAX 360 MAX 16.4+2-0 *Compliant to EIA 481A MARKING SPECIFICATIONS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Line 1: ECLIPTEK Characteristic Specification Fine Leak Test Gross Leak Test Mechanical Shock Vibration Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-202, Method 210 MIL-STD-202, Method 215 Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EC26 CERAMIC 3.3V OS30 03/09 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.