PRODUCT DESCRIPTION
CircuitWorks® Flux Remover Pens are
designed specifically to remove each type of
flux. The Rosin Flux Remover Pen quickly
cleans type R, RMA, and RA flux residues.
The No Clean Flux Remover Pen precisely
removes both organic and synthetic low solid
no clean fluxes.
A pen for removing rosin flux residues
A pen for spot removal of no clean fluxes
Penetrates hard to reach areas
Marker pen dispenser provides controlled
and exact application
Removes ionic and non-ionic residues
Excellent material compatibility
Fast drying
TYPICAL APPLICATIONS
CircuitWorks® Flux Remover Pens remove
flux residues and clean precise areas on:
Printed Circuit Boards
Chip Carriers
Heat Sinks
Surface Mount Device Pads
Switches
Sockets
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Rosin Flux Remover Pen
Flash Point (TCC) 70 °F (21 °C)
Vapor Density (air=1) > 1
Surface Tension 21.3 dyne/cm
Appearance Clear Liquid
Odor Alcohol
No Clean Flux Remover Pen
Flash Point (TCC) 102 °F (39 °C)
Vapor Density (air=1) > 1
Surface Tension 17.7 dyne/cm
Appearance Clear Liquid
Odor Characteristic
Water Soluble Flux Remover Pen
Flash Point (TCC) 70 °F (21 °C)
Vapor Density (air=1) > 1
Surface Tension 21.1 dyne/cm
Appearance Clear Liquid
Odor Alcohol
Shelflife 5 years
RoHS/WEEE
Status
CHEMTRONICS®
Technical Data Sheet
CircuitWorks® Flux Remover Pens
TDS # CW9000
COMPATIBILITY
CircuitWorks® Flux Remover Pens are
generally compatible with most mater i al s u s ed
in the electronics industry. As with any
cleaning agent, material compatibility should
be determined on a non-critical area prior to
use.
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Hold pen vertically and briefly depress tip to
start liquid flow. Rub pen tip on surface to be
cleaned. Wipe tip on a ControlWipe™ dry
wipe to remove buildup.
CAUTION: Product is Flammable - Do not use
near sources of ignition and energized equipment.
AVAILABILITY
CW9100 9 gm (0.32 oz) No Clean Flux Remover Pen
CW9200 8 gm (0.28 oz) Rosin Flux Remover Pen
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics® provides a technical hotline to
answer your technical and application related
questions. The toll free number is: 1-800-TECH-
401.
NOTE: This information is believed to be accurate. It is
intended for professional end users having the skills to
evaluate and use the data properly.
CHEMTRONICS® does not guarantee the accuracy of the
data and assumes no liability in connection with damages
incurred while using it.
MANUFACTURED BY:
ITW CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888 REV. C (06/06)
DISTRIBUTED BY:
