100-120W, 90-264Vac Input, Open-frame Switching Mode Power Supply
Technical Sales / Customer Service: +1-818-338-7788 • Email: sales@autec.com
31328 Via Colinas Suite 102 • Westlake Village, CA 91362 USA • www.autec.com
May 8, 2019
1 / 4
SP120 Series
◼ Features
• Single output from 100-120W
• Input voltage range: 90-2464V
• Output current(0-8400mA)
• 2.5”x 5” and 3”x 5” form factor
• High variety of output voltages from 12Vdc-48Vdc
• Efficiency to 85%
• Protections: OVP, SCP, Brown-out, and overload
• UL, cUL, CE, FCC, TUV certifications
◼ Applications
• Network system, telecommunication system, storage system, industrial equipment, and printers
◼ Model List*(See part number scheme for model number details)
Notes:
1. Load regulation is tested at 10% to 100% of the rated load.
2. Peak-to-peak for 100W, and 120W models, convection rating @115Vac MIN.; Measurements with a
20MHz bandwidth and terminated with a 22uF electrolytic Cap. In parallel with a 0.1uF ceramic Cap.
Model
Number
Input
Voltage
Output
Power
Output
Voltage
Output
Current Min.
Output
Current Max.
Efficiency
Ripple &
Noise
(mVp-p)
Certificates
SP120-1121
90–264Vac
100W
12V
0
8.4A
84%
120
UL/cUL/CB
TUV/CE/FCC
SP120-1151
90–264Vac
120W
15V
0
8A
85%
150
UL/cUL/-
-/CE/FCC
SP120-1191
90–264Vac
120W
19V
0
6.32A
85%
190
-/-/-
-/CE/FCC
SP120-1241
90–264Vac
120W
24V
0
5A
85%
240
UL/cUL/CB
TUV/CE/FCC
SP120-1301
90–264Vac
120W
30V
0
4A
85%
300
-/-/-
-/CE/FCC
SP120-1361
90–264Vac
120W
36V
0
3.33A
85%
360
UL/cUL/CB
TUV/CE/FCC
SP120-1481
90–264Vac
120W
48V
0
2.5A
85%
480
UL/cUL/CB
TUV/CE/FCC
*Product images are for illustrative purposes
only and may vary from actual design.
100-120W, 90-264Vac Input, Open-frame Switching Mode Power Supply
Technical Sales / Customer Service: +1-818-338-7788 • Email: sales@autec.com
31328 Via Colinas Suite 102 • Westlake Village, CA 91362 USA • www.autec.com
May 8, 2019
2 / 4
SP120 Series
◼ Technical Data
◼ Safety and EMC Approval
Input Voltage
90 – 264Vac
Frequency
50/60 Hz
Input Current
@115Vac 2.0A rms ; @230Vac 1.0A rms
Inrush Current
Cold Start@ 115Vac, at25℃ < 40 Ap-p
Cold Start@ 230Vac, at25℃ < 80 Ap-p
Load Regulation
±5%
Line Regulation
±0.5%
Turn-on Time
<3 Sec (Full Load @115Vac)
Hold-up Time
> 16mSec (Full Load @115Vac)
Safety Ground Leakage
Current
<3.5mA (Class I Type@230Vac 50Hz)
Brown-out Protection
Auto-Recovery
Over Voltage Protection
Latch off (140%±30%)
Over Load Protection
Hiccup/Auto-Recovery
Short circuit protection
Hiccup/Auto-Recovery
Operating Temperature
0-50℃
Storage Temperature
-40-85℃
Storage Humidity
5%-95% RH
UL 60950-1
(some models)
cUL 60950-1
(some models)
CB Report(IEC60950-1)
(some models)
TUV EN 60950-1
(some models)
CE
FCC
100-120W, 90-264Vac Input, Open-frame Switching Mode Power Supply
Technical Sales / Customer Service: +1-818-338-7788 • Email: sales@autec.com
31328 Via Colinas Suite 102 • Westlake Village, CA 91362 USA • www.autec.com
May 8, 2019
3 / 4
SP120 Series
◼ Mechanical Diagram
Dimensions:
Type A: 2.55”x5”x0.9” (W x L x H inch)
Type B: 3.0”x5”x0.9” (W x L x H inch)
◼ Connector Types & PIN Assignments
Connector
Connector Type
PIN Number
Signal
CON 1
(INPUT)
Molex 10-63-4027 or Equivalent parts
Mating Type=Molex 09-50-1031 or Equivalent
PIN 1
PIN 2
PIN 3
LINE
NC
NEUTRAL
CON2
(OUTPUT)
Molex 09-65-268 or Equivalent parts
Mating Type= Molex 09-50-1061 or Equivalent
PIN 4~6
PIN 1~3
+V
RETURN
100-120W, 90-264Vac Input, Open-frame Switching Mode Power Supply
Technical Sales / Customer Service: +1-818-338-7788 • Email: sales@autec.com
31328 Via Colinas Suite 102 • Westlake Village, CA 91362 USA • www.autec.com
May 8, 2019
4 / 4
SP120 Series
Part Number Scheme
SP 120-1 XX 1
SP=Open-frame series
1=Single output
120=Output power Watts
XX=Rated Voltage
Ex.) 12=12V
48=48V
*Product images are for illustrative purposes only and may vary from actual design.
*Specifications are subject to change without notice. Autec is not responsible for issues arising from errors
or omissions.
1=Single Input
