LM105/LM205/LM305/LM305A, LM376 Voltage Regulators General Description The LM105 series are positive voltage regulators similar to the LM100, except that an extra gain stage has been added for improved regulation. A redesign of the biasing circuitry removes any minimum load current requirement and at the same time reduces standby current drain, permitting higher voltage operation. They are direct, plug-in replacements for the LM100 in both linear and switching regulator circuits with output voltages greater than 4.5V. Important characteristics of the circuits are: Y Output voltage adjustable from 4.5V to 40V Y Output currents in excess of 10A possible by adding external transistors Y Load regulation better than 0.1%, full load with current limiting DC line regulation guaranteed at 0.03%/V Ripple rejection on 0.01%V Y 45 mA output current without external pass transistor (LM305A) Like the LM100, they also feature fast response to both load and line transients, freedom from oscillations with varying resistive and reactive loads and the ability to start reliably on any load within rating. The circuits are built on a single silicon chip and are supplied in a TO-99 metal can. The LM105 is specified for operation for b55 C s TA s a 125 C, and the LM305/LM305A is specified for 0 C s TA s a 70 C. Y Y Schematic and Connection Diagrams Metal Can Package TL/H/7755 - 3 Top View Order Number LM105H, LM105H/883, SMD Y5962-8958801, LM305H or LM305AH See NS Package Number H08C TL/H/7755 - 1 C1995 National Semiconductor Corporation TL/H/7755 RRD-B30M115/Printed in U. S. A. LM105/LM205/LM305/LM305A, LM376 Voltage Regulators January 1995 Absolute Maximum Ratings If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. (Note 5) LM105 LM305 LM305A Input Voltage 50V 40V 50V Input-Output Differential 40V 40V 40V Power Dissipation (Note 1) 800 mW 800 mW 800 mW b 55 C to a 125 C b 0 C to a 70 C Operating Temperature Range 0 C to a 70 C b 65 C to a 150 C b 65 C to a 150 C b 65 C to a 150 C Storage Temperature Range Lead Temperature (Soldering, 10 seconds) 300 C 300 C 300 C Electrical Characteristics (Note 2) Parameter LM105 Conditions Min Typ LM305 Max Min Typ LM305A Max Min Typ Units Max Input Voltage Range 8.5 50 8.5 40 8.5 50 V Output Voltage Range 4.5 40 4.5 30 4.5 40 V Input-Output Voltage Differential 3.0 30 3.0 30 3.0 30 V Load Regulation (Note 3) RSC e 10X, TA e 25 C 0.02 0.05 0.02 0.05 % RSC e 10X, TA e TA(MAX) 0.03 0.1 0.03 0.1 % 0.03 0.1 0.03 0.1 % RSC e 10X, TA e TA(MIN) 0 s IO s 12 mA 0 s IO s 12 mA RSC e 0X, TA e 25 C 0.02 0.2 % RSC e 0X, TA e 70 C 0.03 0.4 % RSC e 0X, TA e 0 C 0.03 0.4 % 0 s IO s 45 mA Line Regulation Temperature Stability TA e 25 C %/V 0 C s TA s a 70 C %/V VIN b VOUT s 5V, TA e 25 C 0.025 0.06 0.025 0.06 0.025 0.06 %/V VIN b VOUT t 5V, TA e 25 C 0.015 0.03 0.015 0.03 0.015 0.03 %/V 0.3 1.0 0.3 1.0 0.3 1.0 % TA(MIN) s TA s TA(MAX) 2 Electrical Characteristics (Note 2) (Continued) Parameter Feedback Sense Voltage Output Noise Voltage Standby Current Drain LM105 Conditions LM305 Max Min Typ Max Min Typ Max 1.63 1.7 1.81 1.63 1.7 1.81 1.55 1.7 1.85 V 10 Hz s f s 10 kHz CREF e 0 0.005 0.005 0.005 CREF e 0.1 mF 0.002 0.002 0.002 % % VIN e 30V, TA e 25 C mA 0.8 VIN e 50V TA e 25 C, RSC e 10X, VOUT e 0V, (Note 4) 225 0.8 2.0 300 375 Long Term Stability Ripple Rejection Units Typ VIN e 40V Current Limit Sense Voltage LM305A Min CREF e 10 mF, f e 120 Hz 225 300 2.0 375 mA 225 0.8 2.0 mA 300 375 mV 0.1 0.1 0.1 % 0.003 0.003 0.003 %/V iJA TO-99 Board Mount in Still Air 230 230 230 C/W iJA TO-99 Board Mount in 400 LF/Min Air Flow 92 92 92 C/W iJC TO-99 25 25 25 C/W Note 1: The maximum junction temperature of the LM105 and LM305A is 150 C, and the LM305 is 85 C. For operation at elevated temperatures, devices in the H08C package must be derated based on a thermal resistance of 168 C/W junction to ambient, or 25 C/W junction to case. Peak dissipations to 1W are allowable providing the dissipation rating is not exceeded with the power average over a five second interval for the LM105 and averaged over a two second interval for the LM305. Note 2: Unless otherwise specified, these specifications apply for temperatures within the operating temperature range, for input and output voltages within the range given, and for a divider impedance seen by the feedback terminal of 2 kX. Load and line regulation specifications are for a constant junction temperature. Temperature drift effects must be taken into account separately when the unit is operating under conditions of high dissipation. Note 3: The output currents given, as well as the load regulation, can be increased by the addition of external transistors. The improvement factor will be roughly equal to the composite current gain of the added transistors. Note 4: With no external pass transistor. Note 5: Refer to RETS105X Drawing for military specifications for the LM105. 3 Typical Performance Characteristics LM105/LM305/LM305A Load Regulation Current Limiting Characteristics Current Limit Sense Voltage Short Circuit Current Optimum Divider Resistance Values Minimum Input Voltage Regulator Dropout Voltage Supply Voltage Rejection Minimum Output Voltage Standby Current Drain Transient Response Load Regulation TL/H/7755 - 6 4 Typical Applications 10A Regulator with Foldback Current Limiting Solid tantalum. *Electrolytic TL/H/7755 - 4 1.0A Regulator with Protective Diodes Protects against shorted input or inductive leads on unregulated supply. *Protects against input voltage reversal. Protects against output voltage reversal. TL/H/7755 - 5 Linear Regulator with Foldback Current Limiting Current Regulator TL/H/7755 - 8 TL/H/7755 - 9 5 Typical Applications (Continued) Shunt Regulator TL/H/7755 - 10 Switching Regulator Basic Positive Regulator with Current Limiting Solid tantaium. 125 turns e 22 on Arnold Engineering A262123-2 molybdenum permally core. TL/H/7755-11 TL/H/7755 - 12 1.0A Regulator with Protective Diodes Protects against shorted input or inductive loads on unregulated supply. *Protects against input voltage reversal. Protects against output voltage reversal. TL/H/7755 - 13 Linear Regulator with Foldback Current Limiting TL/H/7755 - 14 6 7 LM105/LM205/LM305/LM305A, LM376 Voltage Regulators Physical Dimensions inches (millimeters) Metal Can Package (H) Order Number LM105H, LM105H/883, SMD Y5962-8958801, LM305H or LM305AH NS Package Number H08C LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation 1111 West Bardin Road Arlington, TX 76017 Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Europe Fax: (a49) 0-180-530 85 86 Email: cnjwge @ tevm2.nsc.com Deutsch Tel: (a49) 0-180-530 85 85 English Tel: (a49) 0-180-532 78 32 Fran3ais Tel: (a49) 0-180-532 93 58 Italiano Tel: (a49) 0-180-534 16 80 National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-043-299-2309 Fax: 81-043-299-2408 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.