M10, M11, M12, M25 Vishay Draloric Thin Film, Rectangular, Resistor Chips FEATURES * Metal film layer on high quality ceramic * Protective top coat * Pure tin on nickel barrier layer * Excellent stability at different environmental conditions * Low TC and tight tolerances * Resistant to extreme degrees of humidity (HAST - Test) STANDARD ELECTRICAL SPECIFICATIONS POWER RATING W70C LIMITING ELEMENT TEMPERATURE RESISTANCE TOLERANCE VOLTAGE MAX COEFFICIENT RANGE E-SERIES CECC EIA % METRIC V ppm/K 40401-801 575 SIZE MODEL INCH M10 0402 1005 0.063 0.063 25 25, 50 0.5, 1 10R - 20K*) M11 0603 1608 0.1 0.063 75 25 0.1, 0.25, 0.5, 1 10R - 56K*) 50 0.1, 0.25, 0.5, 1 10R - 56K*) 1R0 - 100K*) 25 0.1, 0.25 0.5, 1 10R - 100K*) 50 0.1, 0.25, 0.5, 1 10R - 100K*) 1R0 - 220K*) 25 0.1, 0.25 0.5, 1 10R - 220K*) 50 0.1, 0.25, 0.5, 1 10R - 220K*) 1R0 - 330K*) M12 M25 0805 1206 2012 0.125 3216 0.1 0.25 150 0.125 200 24 - 96 24 - 96 24 - 96 24 - 96 *Higher values on request, ask about extended value ranges * Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material * Marking: 4 digits, M10 - no marking TECHNICAL SPECIFICATIONS PARAMETER UNIT M10 W 0.063 Rated Dissipation at 70C (CECC 40401 | EIA 575) 0.125 M25 0.1 0.25 0.125 V 25 75 150 200 > 50 > 100 > 200 > 300 Thermal Resistance 1) K/W Insulation Resistance 8701) - 5501) 4401) - > 10 C - 55 / + 125 (+ 155) Failure Rate h-1 0.3 *10-9 g 0.65 Measuring conditions in acc. with CECC 40401 2) Rated voltage: - 2201) - 9 Category Temperature Range Weight / 1000pcs 1) M12 0.063 Vdc/ac peak Limiting Element Voltage 2) Insulation Voltage (1 min) M11 0.1 2 5.5 10 PxR ORDERING INFORMATION M12 25 562R .5% P5 MODEL TC ppm / K RESISTANCE VALUE TOLERANCE % PACKAGING P5-Papertape 5000 pcs www.vishay.com 144 For technical questions contact: ff1bresistors@vishay.com Document Number: 20028 Revision: 31-Jan-05 M10, M11, M12, M25 Vishay Draloric Thin Film, Rectangular, Resistor Chips DIMENSIONS SIZE DIMENSIONS [in millimeters] INCH METRIC L W H T1 T2 0402 1005 1.0 0.05 0.5 0.05 0.35 0.05 0.25 0.1 0.2 0.1 0603 1608 + 0.10 1.55 - 0.05 0.85 0.1 0.45 0.05 0.30 0.2 0.3 0.2 0805 2012 0.20 2.0 + - 0.10 1206 3216 0.10 3.2 + - 0.20 1.25 0.15 0.45 0.05 0.30+ 0.20 0.3 0.2 - 0.10 1.6 0.15 0.55 0.05 0.45 0.2 0.4 0.2 SOLDER PAD DIMENSIONS [in millimeters] 90 80 0402 0603 0805 1206 70 60 REFLOW SOLDERING INCH METRIC a b l 0402 1005 0.4 0.6 0.5 0603 1608 0.5 0.9 0805 2012 0.7 1206 3216 0.9 Rated Power in % Temperature Rise in C SIZE WAVE SOLDERING a b l 1.0 0.9 0.9 1.0 1.4 1.2 0.9 1.3 1.3 1.7 2.0 1.1 1.7 2.3 120 100 80 50 60 40 30 40 20 20 10 0 0 0.1 0.2 0.3 Temperature Rise 0.4 0.5 0 - 55 Power in W Derating -25 0 25 50 75 100 125 150 175 70 Ambient Temperature in C PACKAGING REEL MODEL DIAMETER PIECES / REEL 8mm Papertape 180mm / 7" 330mm / 13"2) 10000 50000 P0 PZ 8mm Paper-/Blistertape1) 180mm / 7" 180mm / 7" 255mm / 10" 330mm / 13" 1000* 5000 10000 20000 P1 P5 P0 PN M10 M11 to M25 PACKAGING CODE TAPE WIDTH PAPER BLISTER B1 B5 BN 1) only in combination with 180mm/7" and 330mm/13" plastic reel 2) plastic reel * further information about packaging: see appropriate catalog or web page * For TC25 and Tol 0.1% only Document Number: 20028 Revision: 31-Jan-05 For technical questions contact: ff1bresistors@vishay.com www.vishay.com 145 M10, M11, M12, M25 Thin Film, Rectangular, Resistor Chips 120 110 100 M25 Current Noise in V/V Non-Linearity A3 in dB Vishay Draloric 3 2 1 0.5 M10 M11 M12 M25 0.3 90 0.1 80 M12 M11 M10 0.05 0.03 70 60 10 100 1K 10K Phase Angle in Non-Linearity 100K Resistance Value in M11 40 20 M11 20 10 100 1K -20 1K -40 -40 -60 2 5 10 50 Frequency f in MHz M12 40 -80 20 2 5 10 50 100 500 1000 Frequency f in MHz 60 M12 40 20 10 0 10K HF Performance [Z]-RO in % RO 60 4.75K -60 4.75K 10K 500 1000 100 HF Performance Phase Angle in 100K 1M Resistance Value in 0 -20 -80 10K 40 10 100 0 1K 60 [Z]-RO in % RO 60 0.01 100 Current Noise 10 100 0 100 1K -20 -20 1K -40 -40 -60 -80 -60 2 5 10 50 3K M12 1K M11 100R 1K Single-Pulse High Voltage Overload Test 1.2 / 50s EN140000 4.27 www.vishay.com 146 10K 2 5 10 50 HF Performance 100 500 1000 Frequency f in MHz 3K 1K M12 M11 100 100 10 10R -80 Test Voltage in V Test Voltage in V HF Performance 100 10K 500 1000 Frequency f in MHz 10K 100K Resistance Value in 10 10R 100R 1K Single-Pulse High Voltage Overload Test 10 / 700s EN140000 4.27 For technical questions contact: ff1bresistors@vishay.com 10K 100K Resistance Value in Document Number: 20028 Revision: 31-Jan-05 M10, M11, M12, M25 Vishay Draloric 100 Power Rating P in W Power Rating P in W Thin Film, Rectangular, Resistor Chips M25 10 M12 M11 M10 100 M25 10 M12 M11 M10 1 1 0.1 0.1 Secondary conditions: a) P 0 (peak pulse, single pulse) b) u 70C C) Umax see diagram (Max pulse voltage) 10 - 3 10 - 2 Pulse Voltage Umax in V 0.01 10 - 5 10 - 4 Pulse Rating P 0 10 - 1 0.01 10-4 10-5 Pulse Rating P P70 1 10 Square Pulse ti in s 1000 Secondary conditions: a) P P70 (permissible constant power at u = 70C) b) u 70C C) Umax see diagram (Max pulse voltage) 10-3 10-2 10-1 1 10 Square Pulse ti in s Secondary conditions: a) P see diagram (pulse Rating) b) u 70C 800 600 M25 M12 400 200 M11 M10 0 10-5 10-4 10-3 10-2 Maximum Pulse Voltage 10-1 1 10 Square Pulse ti in s PERFORMANCE TEST RESULTS TEST CONDITIONS OF TEST Endurance Test at 70C IEC 60115-1 4.25.1 TOLERANCES 0.1% / 0.25% 0.5% / 1.0% 1000 hours at 70C, 1.5 hours "ON", 0.5 hours "OFF" 0.2% 0.5% Endurance at UCT IEC 60115-1 4.25.3 1000 hours at 125 C without load 0.2% 0.5% Overload Test IEC 60115-1 4.13 Short time overload for 2 seconds 2.5 x rated voltage or 2 x limiting element voltage 0.05% 0.1% Thermal Shock IEC 60115-1 4.19, IEC 60068-2-14 Rapid change between upper and lower category temperature 0.05% 0.1% Damp Heat Steady State IEC 60115-1 4.24, IEC 60068-2-3 56 days at 40C and 93% relative humidity 0.2% 0.5 Resistance to Soldering Heat IEC 60115-1 4.18, IEC 60068-2-20 10 seconds at 260C solder bath temperature 0.05% 0.2 APPLICABLE SPECIFICATIONS * CECC40000 / 40400 / 40401-801 * EN140400 / IEC 60115 - 1 Document Number: 20028 Revision: 31-Jan-05 For technical questions contact: ff1bresistors@vishay.com www.vishay.com 147