STTH15AC06 Turbo 2 ultrafast high voltage rectifier Datasheet - production data Description $ . The STTH15AC06 uses ST Turbo 2 600 V technology and is suited as a boost diode in air conditioning equipment for continuous mode interleaved power factor correction. The device is also intended for use as a freewheeling diode in power supplies and other power switching applications. Table 1. Device summary $ . 72)3$& Features * Ultrafast switching Symbol Value IF(AV) 15 A VRRM 600 V trr (typ) 40 ns VF (typ) 1.15 V Tj (max) 175 C * Low reverse current * Reduces switching and conduction losses * Low thermal resistance * Insulated package TO-220FPAC: - Insulated voltage: 2000 VRMS sine April 2015 This is information on a product in full production. DocID026243 Rev 2 1/8 www.st.com 8 Characteristics 1 STTH15AC06 Characteristics Table 2. Absolute ratings (limiting values at 25 C, unless otherwise specified) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage 600 V IF(RMS) Forward rms current 30 A IF(AV) Average forward current 15 A IFSM Surge non repetitive forward current 120 A Tstg Storage temperature range -65 to +175 C 175 C Tj tp = 10 ms sinusoidal Maximum operating junction temperature Table 3. Thermal parameters Symbol Rth(j-c) Parameter Junction to case Value Unit 4.4 C/W Table 4. Static electrical characteristics Symbol Parameter IR(1) Reverse leakage current VF(2) Forward voltage drop Test conditions Tj = 25 C Tj = 150 C Tj = 25 C Tj = 150 C Min. Typ. Max. Unit 2 VR = VRRM A 20 200 1.9 IF = 15 A V 1.15 1.50 1. Pulse test: tp = 5 ms, < 2% 2. Pulse test: tp = 380 s, < 2% To evaluate the conduction losses use the following equation: P = 1.2 x IF(AV) + 0.02 IF2(RMS) Table 5. Dynamic characteristics Symbol trr IRM tfr VFP 2/8 Test conditions Parameter Reverse recovery time Reverse recovery current Tj = 25 C IF = 0.5 A, Irr = 0.25 A, IR= 1 A 30 ns IF = 1 A, VR = 30 V, dIF/dt = -50 A/s 40 55 Tj = 125 C IF = 15 A, VR = 400 V, dIF/dt = -100 A/s 4.4 6 A IF = 15 A, VFR = 1.6 V, dIF/dt = 100 A/s 300 ns Tj = 25 C Forward recovery time Forward recovery voltage Min. Typ. Max. Unit DocID026243 Rev 2 2.5 V STTH15AC06 Characteristics Figure 1. Average forward power dissipation versus average forward current PF(AV)(W) 30 Figure 2. Forward voltage drop versus forward current (typical values) IF(A) 100.0 = 0.2 = 0.1 = 0.05 =1 = 0.5 25 Tj = 150 C 10.0 20 Tj = 25 C 15 10 1.0 T 5 tp =tp/T IF(AV)(A) VF(V) 0 0.1 0 2 4 6 8 10 12 14 16 18 Figure 3. Forward voltage drop versus forward current (maximum values) 100.0 IF(A) 0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 Figure 4. Relative variation of thermal impedance, junction to case, versus pulse duration 1.0 Zth(j-c)/Rth(j-c) Single pulse TO-220FPAC 0.9 0.8 Tj = 150 C 0.7 10.0 Tj = 25 C 0.6 0.5 0.4 1.0 0.3 0.2 VF(V) 0.1 0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 Figure 5. Peak reverse recovery current versus dIF/dt (typical values) 20 IRM(A) 0.1 1.E-02 1.E-01 1.E+00 1.E+01 1.E+02 Figure 6. Reverse recovery time versus dIF/dt (typical values) 400 IF = 15 A VR = 400 V Tj = 125 C tp(s) 0.0 1.E-03 trr(ns) IF = 15 A VR = 400 V Tj = 125 C 350 16 300 250 12 200 8 150 100 4 dIF/dt(A/s) 0 0 50 100 150 200 250 300 350 400 450 500 50 dIF/dt(A/s) 0 0 50 DocID026243 Rev 2 100 150 200 250 300 350 400 450 500 3/8 Characteristics STTH15AC06 Figure 7. Reverse recovery charges versus dIF/dt (typical values) Qrr(nC) 1000 3.0 IF = 15 A VR = 400 V Tj = 125 C 800 Figure 8. Reverse recovery softness factor versus dIF/dt (typical values) SFACTOR IF = 15 A VR = 400 V Tj = 125 C 2.5 2.0 600 1.5 400 1.0 200 0.5 dIF/dt(A/s) dIF/dt(A/s) 0.0 0 0 50 100 150 200 250 300 350 400 450 0 500 Figure 9. Relative variations of dynamic parameters versus junction temperature 100 150 200 250 300 350 400 450 500 Figure 10. Transient peak forward voltage versus dIF/dt (typical values) 1.2 10 IF=15 A VR=400 V Reference: Tj=125 C 1.0 50 VFP(V) IF = 15 A Tj = 125 C 8 0.8 SFACTOR 6 0.6 IRM 4 0.4 QRR 2 0.2 Tj(C) dIF/dt(A/s) 0.0 25 50 75 100 125 0 50 100 150 200 250 300 350 400 450 500 Figure 11. Forward recovery time versus dIF/dt Figure 12. Junction capacitance versus reverse (typical values) voltage applied (typical values) 250 tfr(ns) 1000 C(pF) F = 1 MHz VOSC = 30 mV RMS Tj = 25 C IF = 15 A VFR = 1.6 V Tj = 125 C 200 150 100 100 50 dIF/dt(A/s) 50 4/8 VR(V) 10 0 100 150 200 250 300 350 400 450 500 1 DocID026243 Rev 2 10 100 1000 STTH15AC06 2 Package information Package information * Epoxy meets UL94, V0 * Recommended torque value for TO-220FPAC: 0.55 N*m * Maximum torque value for TO-220FPAC: 0.7 N*m In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. 2.1 TO-220FPAC package information Figure 13. TO-220FPAC package outline A B H Dia L6 L2 L7 L3 F1 D L4 F G1 E G DocID026243 Rev 2 5/8 Package information STTH15AC06 Table 6. TO-220FPAC package mechanical data Dimensions Ref. Millimeters Min. Max. Min. Typ. Max. A 4.4 4.6 0.173 0.181 B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.70 0.018 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.70 0.045 0.067 G 4.95 5.20 0.195 0.205 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 L2 6/8 Typ. Inches 16 Typ. 0.63 Typ. L3 28.6 30.6 1.126 1.205 L4 9.8 10.6 0.386 0.417 L6 15.9 16.4 0.626 0.646 L7 9.00 9.30 0.354 0.366 Dia. 3.00 3.20 0.118 0.126 DocID026243 Rev 2 STTH15AC06 3 Ordering information Ordering information Table 7. Ordering information 4 Order code Marking Package Weight STTH15AC06FP STTH15AC06FP TO-220FPAC 1.8 g Base qty Delivery mode 50 Tube Revision history Table 8. Document revision history Date Revision Changes 17-Apr-2014 1 First release. 24-Apr-2015 2 Updated Features and Table 3. DocID026243 Rev 2 7/8 STTH15AC06 IMPORTANT NOTICE - PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST's terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers' products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. (c) 2015 STMicroelectronics - All rights reserved 8/8 DocID026243 Rev 2 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: STMicroelectronics: STTH15AC06FP