2SC5227A
No. A1063-1/8
Features
• Low-noise : NF=1.0dB typ (f=1GHz)
• High gain : ⏐S21e⏐2=12dB typ (f=1GHz)
• High cut-off frequency : fT=7GHz typ
Specifi cations
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Collector-to-Base Voltage VCBO 20 V
Collector-to-Emitter Voltage VCEO 10 V
Emitter-to-Base Voltage VEBO 2V
Collector Current IC70 mA
Collector Dissipation PC200 mW
Junction Temperature Tj 150 °C
Storage Temperature Tstg --55 to +150 °C
Package Dimensions
unit : mm (typ)
7013A-009
Ordering number : ENA1063A
71812 TKIM/51408AB TIIM TC-00001342
SANYO Semiconductors
DATA SHEET
2SC5227A
NPN Epitaxial Planar Silicon Transistor
VHF to UHF Wide-Band Low-Noise
Amplifi er Applications
http://semicon.sanyo.com/en/network
Product & Package Information
• Package : CP
• JEITA, JEDEC : SC-59, TO-236, SOT-23, TO-236AB
•
Minimum Packing Quantity
: 3,000 pcs./reel
Packing Type: TB Marking
Electrical Connection
1 : Base
2 : Emitter
3 : Collector
SANYO : CP
12
3
1.5
2.5
1.1
0.3
0.05
2.9
0.95 0.4
0.1
0.5
0.5
TB LN
LOT No.
R
A
N
K
LOT No.
2SC5227A-4-TB-E
2SC5227A-5-TB-E
3
2
1
2SC5227A
No. A1063-2/8
Electrical Characteristics at Ta=25°C
Parameter Symbol Conditions Ratings Unit
min typ max
Collector Cutoff Current ICBO VCB=10V, IE=0A 1.0 μA
Emitter Cutoff Current IEBO VEB=1V, IC=0A 10 μA
DC Current Gain hFE VCE=5V, IC=20mA 60* 270*
Gain-Bandwidth Product fTVCE=5V, IC=20mA 5 7 GHz
Output Capacitance Cob VCB=10V, f=1MHz 0.75 1.2 pF
Reverse Transfer Capacitance Cre 0.5 pF
Forward Transfer Gain ⏐S21e⏐21V
CE=5V, IC=20mA, f=1GHz 9 12 dB
⏐S21e⏐22V
CE=2V, IC=3mA, f=1GHz 8 dB
Noise Figure NF VCE=5V, IC=7mA, f=1GHz 1.0 1.8 dB
* : The 2SC5227A is classifi ed by 20mA hFE as follows :
Rank 3 4 5
hFE 60 to 120 90 to 180 135 to 270
Ordering Information
Device Package Shipping memo
2SC5227A-4-TB-E CP 3,000pcs./reel Pb Free
2SC5227A-5-TB-E CP 3,000pcs./reel
hFE -- IC
Collector Current, IC -- mA
DC Current Gain, hFE
Cre -- VCB
Collector-to-Base Voltage, VCB -- V
Reverse Transfer Capacitance, Cre -- pF
Collector Current, IC -- mA
Gain-Bandwidth Product, fT -- GHz
fT -- IC
Cob -- VCB
Collector-to-Base Voltage, VCB -- V
Output Capacitance, Cre -- pF
ITR08204
f=1MHz
ITR07966
f=1MHz
ITR08202
53332
1.0 757 2 2
10 57
100
353
2
1.0 10
7
35
2
0.1 7
72 35 32
1.0 7352
0.1 772
10
1.0
0.1
2
3
5
7
5
7
2
3
1.0
0.1
2
3
5
7
5
7
2
3
VCE=5V
ITR08203
23 3577101.0 7100
522
7
10
1.0
5
7
5
2
3
2
VCE=5V
100
10
2
3
5
7
5
7
2
3
2SC5227A
No. A1063-3/8
⏐S21e⏐2 -- IC
Collector Current, IC -- mA
Forward Transfer Gain, ⏐S21e⏐2 -- dB
Collector Current, IC -- mA
Collector Dissipation, PC -- mW
PC -- Ta
Ambient Temperature, Ta -- °C
Noise Figure, NF -- dB
NF -- IC
ITR08206
0
14
12
10
8
6
4
2
357
1.0 23 57
10 100
22357
VCE=5V
f=1GHz
0 20 40 60 80 100 120 140 160
0
40
80
120
160
200
240
ITR08208
VCE=2V
0
12
10
8
6
4
2
ITR08207
32 57 3
1.0
35722
10 57100
VCE=5V
f=1GHz
2SC5227A
No. A1063-4/8
f=100MHz, 200MHz to 2000MHz(200MHz Step) f=100MHz, 200MHz to 2000MHz(200MHz Step)
f=100MHz, 200MHz to 2000MHz(200MHz Step) f=100MHz, 200MHz to 2000MHz(200MHz Step)
j50
j25
j10
010
--j10
--j25
--j50
--j100
--j150
--j200
--j250
j100
j150
j200
j250
100 150 250
90°
120°
150°
±180°
--150°
--120°
--90°
--30°
--60°
0
60°
30°
16 201284
90°
120°
150°
±180°
--150°
--120°
--90°
--30°
--60°
0
60°
30°
0.04 0.08 0.160.12 0.2
j50
j25
j10
010 25
--j10
--j25
--j50
--j100
--j150
--j200
--j250
j100
j150
j200
j250
100
150 250
50
ITR08209 ITR08210
ITR08211 ITR08212
25
50
2.0GHz
VCE=2V
IC=3mA
VCE=5V
IC=20mA
VCE=5V
IC=7mA
0.1GHz
0.1GHz
0.1GHz
2.0GHz
2.0Hz
0.1GHz
0.1GHz
0.1GHz
VCE=5V
IC=7mA
VCE=2V
IC=3mA
VCE=5V
IC=20mA
2.0GHz
2.0GHz
2.0GHz
VCE=2V
IC=3mA
VCE=5V
IC=7mA
VCE=5V
IC=20mA
0.1GHz
0.1GHz
0.1GHz
2.0GHz
2.0GHz
2.0GHz
2.0GHz
2.0GHz
2.0GHz
VCE=5V
IC=20mA
0.1GHz
0.1GHz
0.1GHz
VCE=2V
IC=3mA
VCE=5V
IC=7mA
2SC5227A
No. A1063-5/8
S Parameters (Common emitter)
VCE=5V, IC=7mA, ZO=50Ω
Freq(MHz) ⏐S11⏐∠
S11 ⏐S21⏐∠
S21 ⏐S12⏐∠
S12 ⏐S22⏐∠
S22
100 0.722 -41.6 17.352 148.7 0.029 70.9 0.883 -21.3
200 0.587 -73.2 13.419 127.6 0.046 60.8 0.710 -33.1
400 0.426 -113.0 8.371 105.1 0.067 56.9 0.507 -40.7
600 0.369 -136.6 5.914 92.7 0.084 58.4 0.423 -42.5
800 0.344 -152.9 4.593 83.9 0.102 60.3 0.382 -43.9
1000 0.334 -165.7 3.750 76.7 0.121 61.5 0.360 -46.3
1200 0.326 -177.9 3.178 70.3 0.141 62.0 0.350 -49.1
1400 0.324 172.3 2.784 64.9 0.162 61.8 0.341 -52.2
1600 0.328 163.4 2.476 59.5 0.183 61.2 0.334 -56.4
1800 0.335 154.5 2.246 54.6 0.204 60.5 0.328 -60.8
2000 0.346 147.5 3.073 50.0 0.226 59.6 0.328 -65.4
VCE=5V, IC=20mA, ZO=50Ω
Freq(MHz) ⏐S11⏐∠
S11 ⏐S21⏐∠
S21 ⏐S12⏐∠
S12 ⏐S22⏐∠
S22
100 0.477 -66.8 28.090 133.6 0.022 67.7 0.726 -32.7
200 0.358 -104.1 17.995 112.9 0.035 65.3 0.506 -41.6
400 0.288 -142.2 9.903 95.9 0.057 68.3 0.350 -42.4
600 0.273 -159.8 6.777 86.7 0.081 69.9 0.299 -41.8
800 0.270 -171.7 5.181 79.9 0.104 70.2 0.278 -43.2
1000 0.271 178.7 4.209 73.9 0.129 69.1 0.269 -45.9
1200 0.273 169.4 3.554 68.5 0.153 67.9 0.264 -49.6
1400 0.275 161.1 3.085 63.6 0.177 66.2 0.258 -53.3
1600 0.284 153.4 2.749 59.1 0.202 64.3 0.253 -58.3
1800 0.294 145.6 2.479 54.6 0.224 62.5 0.249 -63.4
2000 0.302 140.8 2.295 50.6 0.248 60.4 0.248 -68.7
VCE=2V, IC=3mA, ZO=50Ω
Freq(MHz) ⏐S11⏐∠
S11 ⏐S21⏐∠
S21 ⏐S12⏐∠
S12 ⏐S22⏐∠
S22
100 0.858 -30.5 9.283 157.3 0.039 73.6 0.944 -15.6
200 0.769 -57.4 8.036 138.7 0.068 61.4 0.834 -27.5
400 0.607 -97.1 5.756 113.9 0.099 48.4 0.641 -40.5
600 0.528 -123.2 4.302 98.1 0.114 44.4 0.525 -46.5
800 0.486 -141.6 3.414 87.0 0.125 43.9 0.465 -50.2
1000 0.460 -156.4 2.834 78.0 0.137 45.4 0.429 -53.7
1200 0.453 -169.4 2.429 70.3 0.149 47.5 0.408 -57.3
1400 0.440 179.8 2.143 63.6 0.163 49.2 0.395 -60.9
1600 0.441 170.1 1.919 57.4 0.179 50.8 0.385 -65.4
1800 0.447 160.4 1.739 51.7 0.196 52.3 0.381 -70.1
2000 0.454 152.5 1.621 46.4 0.215 53.3 0.379 -75.2
2SC5227A
No. A1063-6/8
Embossed Taping Specifi cation
2SC5227A-4-TB-E, 2SC5227A-5-TB-E
2SC5227A
No. A1063-7/8
Outline Drawing Land Pattern Example
2SC5227A-4-TB-E, 2SC5227A-5-TB-E
Mass (g) Unit
0.013
* For reference
mm Unit: mm
0.950.95
1.0
2.4
0.8
2SC5227A
PS No. A1063-8/8
This catalog provides information as of July, 2012. Specifi cations and information herein are subject
to change without notice.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal
system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten
human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they
grant any guarantee thereof. If you should intend to use our products for new introduction or other application
different from current conditions on the usage of automotive device, communication device, office equipment,
industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.)
prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be
solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are
not guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an
independent device, the customer should always evaluate and test devices mounted in the customer's
products or equipment.
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating
condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
Co.,Ltd. products described or contained herein.
Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature,
high current, high voltage, or drastic temperature change, even if it is used within the range of absolute
maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a
confirmation.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures
or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give
rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment,
adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but
are not limited to protective circuits and error prevention circuits for safe design, redundant design, and
structural design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or
otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Upon using the technical information or products described herein, neither warranty nor license shall be
granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any
third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third
party's intellectual property rights which has resulted from the use of the technical information and products
mentioned above.
