TH E WORLD ' S M OST COM P L ETE SE LE C TI ON OF M I L -SP EC BACKSHELLS AND CO N NE C T O R AC C E SS O RIES--F ROM AS850 49 TO MIL -DTL -38 9 9 9 NOVEMBER 2013 QUALIFIED MIL-SPEC Connector Backshells and Accessories Tens of thousands of parts in-stock and ready for immediate shipment M ost customers have a simple expectation when they go shopping for safety-critical interconnect components: they want fast and accurate service. Glenair stocks tens of thousands of qualified mil-spec backshells and connector accessories--bagged and tagged and ready for immediate shipment. In fact, Glenair is the world's largest manufacturer and supplier of mil-spec backshells and connector accessories with more listed QPL's and more manufacturing experience than any other supplier. You have a simple expectation: fast and accurate service. At Glenair, we're ready to give you exactly that. It's a promise. Glenair, Inc. 1211 Air Way Glendale, CA 91201-2497 818-247-6000 sales@glenair.com www.glenair.com INDEX AND INTRODUCTION Military Standard Backshells and Accessories Industry Specification Number Part Identification Number AS85049/123 M85049/123 AS85049/124 M85049/124 AS85049/126 M85049/126 AS85049/127 M85049/127 AS85049/128-3 AS85049/128-4 AS85049/130 QUALIFIED PRODUCTS * SECTION B Glenair Military Part Number Superseded Commercial Part Number -- 620FA038 90 Strain Relief, Self-Locking Non-Self-Locking -- 620HS038 Sraight Strain Relief, Self-Locking Non-Self-Locking -- 620HA038 or 90 Strain Relief, Self-Locking Part Non-Self-Locking -- 687-581 600-052 600-052-1 Bushing Strip Standard Clamping Band Band Precoiled Standard Clamping M85049/128-3 M85049/128-4 M85049/130 -- Description or or Glenair Connector Designator/ Interface "F" II; MIL-DTL-38999 Series I & MIL-DTL-27599 "H" MIL-DTL-38999 Ser. III & IV EN3645 Page No. B-130 B-132 "H" Military Standard Backshells III & IV B-134 MIL-DTL-38999 Ser. and Accessories EN3645 and Page Number IndexB-136 -- SECTION AS85049/128 B-137 -- B-138 INDEX AND INTRODUCTION INDEX AND INTRODUCTION and Accessories Military Standard Backshells Index Part and Page Number SECTION B * AS85049 A Gasket D * MIL-DTL-28840 QUALIFIED Consult FactoryIndustry B-140 -- PRODUCTS * SECTION Part Military C or L D Specification GS85049/139 Glenair Telescoping Bushing, Identification B-142 Part Number 687 Number Commercial Number Boot Superseded Glenair Connector B-144 Part Number Straight Lipped Heat Shrink Designator/ Boot -- 770-003S107 Description MIL-DTL-28840/1 B-146 Page Long Tail Low Profile H.S. Boot Interface 770-006S102W1 Str. Lipped Mini. M28840/1 Long Tail Low Profile H.S. -- No. 620GS051 StraightB-148 Non-Self-Locking Strain Relief 770-007S104 Str. Lipped Sealing Heat Shrink Boot "G" Straight LippedM28840/2 MIL-DTL-28840/2 AS85049/140 B-150 770-018S102 MIL-DTL-28840 D-2 -- 620GA051 B-152 90 Non-Self-Locking -- 90 Lipped Heat Shrink Boot Shrink Boot Strain Relief 770-003A105 "G" B-154 Profile Heat MIL-DTL-28840/3 LowM28840/3 Boot M85049/141-03 770-006A103 90 Lipped Mini. MIL-DTL-28840 D-3 Low Profile Heat Shrink -- MS3117 620GB051 B-156 45 Non-Self-Locking 770-007A103 90 Lipped AS85049/141 M85049/141-10 Strain Relief "G" B-158 MIL-DTL-28840/4 M85049/141-19 Wide Body Heat Shrink Boot -- Boot MIL-DTL-28840 770-011T102 Tee TransitionM28840/4 D-4 B-160 Wide Body Heat Shrink-- -- Metal-Core Conduit M85049/142-02 770-010Y105 Wye TransitionWide Body Heat Shrink Boot -- "G" 1:3 Transition MIL-DTL-28840/5 770-013110W1 M28840/5 AS85049/142 M85049/142-05 C MIL-DTL-28840 D-5 * SECTION -- M85049/142-10 -- QUALIFIED PRODUCTS Straight Backshell for Metal-Core Glenair Connector Conduit Page "G" SECTION C * MIL-DTL-38999 M28840/6 A MIL-DTL-28840/6 Designator/ MIL-DTL-28840 D-6 390AB001 Glenair -- M28840/6 B Military Interface Strt. EMI/RFINo. Environmental Backshell, Style Part 370 Series Commercial A Industry Straight Environmental Backshell, Description Part Number "G" MIL-DTL-28840/7 Identification D-7 Style B Part Number C-2 M28840/7 Specification Superseded MIL-DTL-28840 MIL-DTL-38999 Series I -- Number D-8 650GS001 Number Protective Plug Cover Dummy Storage Receptacle, 660-012 Threaded Coupling MS20048 "G" Protective Receptacle M28840/8-Cover MIL-DTL-28840/8 MS27501 660-013 C-3 MIL-DTL-38999 Series II MS20047 MIL-DTL-28840 D-9 MIL-DTL-38999 -- M28840/8 MS27502 90 Environmental Backshell, Cover A 390-061 Protective Plug MIL-DTL-38999 Style A 660-014 90 EMI/RFI Environmental MS27352 C-4 "G" Protective Receptacle M28840/9 BCover MS27510 MIL-DTL-28840/9 Backshell, Style B 660-015 D-10 MIL-DTL-38999, Series III MS27353 MIL-DTL-28840 Threaded MIL-DTL-38999 -- Coupling M28840/9 MS27511 Receptacle, 45 Environmental A D-11 390-061 Dummy Storage III & IV; C-5 Backshell, Style A 650HS010 MIL-DTL-38999 Series -- MIL-DTL-28840/13 45 "G" D38999/22 M28840/13 EN3645 EMI/RFI Environmental Backshell D-12 MIL-DTL-38999/22 MIL-DTL-28840/15 with Safety Wire Holes MIL-DTL-28840 660-010 -- Protective Threaded Receptacle Consult Factory Jam Nut M28840/15 D-13 -- C-6 Cover 660-011 Series IIIThreaded D38999/28 MIL-DTL-38999,Protective MIL-DTL-38999/28 Plug Cover MIL-DTL-28840/22 or Metal Threaded Plug Cover Cover MIL-DTL-28840 CompositeM28840/22 660-023 Receptacle D-14 -- C-7 Composite or Metal Threaded -- D38999/32 Series IV Conduit -- 660-024 Metal-Core MIL-DTL-38999, MIL-DTL-38999/32 Bushing Coupling Bayonet "G" D38999/33 Receptacle, MIL-DTL-28840/23 Dummy Storage MIL-DTL-38999/33 M28840/23 650HS007 MIL-DTL-28840 D-15 -- -- Consult Factory E Nut, D38999/50 Non-Self-Locking MIL-DTL-38999/50 "G" MIL-DTL-28840/24 M28840/24 MIL-DTL-28840 D-16 -- Consult Factory Gasket "G" SECTION E * MIL-DTL-83723 MIL-DTL-28840 D-17 QUALIFIED PRODUCTS Industry Part * SECTION E Military Specification Glenair Identification Part Number Number Commercial Number Glenair Connector Superseded Part Number Designator/ Description MIL-DTL-83723/27 Page M83723/27M Interface -- No. 310KS002 Straight Shrink Boot Adapter "K" M83723/35S MIL-DTL-83723/35 MIL-DTL-83723 Series II E-2 M83723/35A Strt. Non-Environmental -- Consult Factory 90 Non-Environmental Strain Relief Backshell M83723/35N Strain Relief Backshell E-3 "K" Non-Self-Locking E-Nut M83723/50 R MIL-DTL-83723 Series II E-4 MIL-DTL-83723/50 M83723/50 B Straight Qwik-Ty(R) Strain Relief E-5 -- Consult Factory 45 Qwik-Ty M83723/50 A (R) Strain Relief K" MIL-DTL-83723/59 90 Qwik-Ty(R) Strain Relief M83723/59-1 MIL-DTL-83723 Series II E-6 MS27292 MIL-DTL-83723/60 660-021 M83723/60-1 Protective Plug Cover, Threaded MS27293 Coupling 660-022 MIL-DTL-83723/59 Protective Receptacle Cover, without notice. M83723/59-2 MIL-DTL-83723, Series III are subject to change Printed in U.S.A. Threaded Coupling MS27294 MIL-DTL-83723/60 (millimeters) and E-7 660-019 M83723/60-2 Dimensions in inches Protective Plug Cover Bayonet MS27295 660-020 U.S. CAGE Code 06324 MIL-DTL-83723/70 Protective Receptacle Cover Coupling M83723/70 MIL-DTL-83723, Series III 818-500-9912 Bayonet Coupling -- Consult Factory* FAX E-8 (c) 2013 Glenair, Inc. Straight Quick Disconnect CA 91201-2497 * 818-247-6000 Receptacle Adapter E-Mail: sales@glenair.com AIR WAY * GLENDALE, -- E-9 GLENAIR, INC. * 1211 A-6 AS85049/139 M85049/139 M85049/140-05 M85049/140-09 M85049/140-20 M85049/140-25 -- Part Number Index and Introduction A AS85049 Qualified Backshells and Connector Accessories B MIL-DTL-38999 Qualified Connector Accessories C MIL-DTL-28840 Qualified Backshells and Connector Accessories D MIL-DTL-83723 Qualified Backshells and Connector Accessories E AS81511 Qualified Backshells and Connector Accessories F Miscellaneous Qualified Backshells and Connector Accessories G Backshell-to-Connector Assembly Tools H MS3420 MS3109 A www.glenair.com Dimensions in inches (c) 2013 Glenair, Inc. (millimeters) and are subject U.S. CAGE to change without notice. Code 06324 GLENAIR, INC. * 1211 Printed in U.S.A. AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 A-7 www.glenair.com Quick Reference P/N to Page No. E-Mail: sales@glenair.com and Accessories Military Standard Backshells Index Number to Page Number Quick-Reference Part Part Number AS25042 AS25043 AS50151 AS81511/13 AS81511/14 AS81511/14 AS81511/17 AS81511/18 AS81511/19 AS81511/20 AS81511/29 AS81511/30 AS85049/1 AS85049/2 Page G-2 G-8 F-2 F-3 F-5 F-7 F-8 F-9 F-7 F-10 B-2 B-3 B-4 B-5 AS85049/3 B-6 B-7 B-9 AS85049/4 B-11 B-13 B-15 AS85049/5 B-17 B-19 AS85049/6 B-21 AS85049/7 B-23 AS85049/8 B-25 AS85049/9 B-27 AS85049/10 B-31 AS85049/11 B-35 AS85049/14 B-36 AS85049/15 B-36 AS85049/16 B-37 AS85049/17 B-38 AS85049/18 B-39 AS85049/19 B-41 AS85049/20 B-42 AS85049/21 B-43 AS85049/23 B-45 AS85049/24 B-47 AS85049/25 B-51 AS85049/26 B-52 B-53 AS85049/27 B-54 AS85049/28 Part Number AS85049/29 AS85049/30 AS85049/31 AS85049/33 AS85049/34 AS85049/36 AS85049/37 AS85049/38 AS85049/39 AS85049/41 AS85049/42 AS85049/43 AS85049/44 AS85049/45 AS85049/46 AS85049/47 AS85049/48 AS85049/49 AS85049/50 AS85049/51 AS85049/52 AS85049/53 AS85049/54 AS85049/55 AS85049/56 AS85049/57 AS85049/58 AS85049/59 Page B-55 B-56 B-57 B-58 B-59 B-60 B-61 B-62 B-63 B-64 B-65 B-66 B-67 B-68 B-69 B-70 B-71 B-72 B-73 B-74 B-75 B-76 B-77 AS85049/60 AS85049/61 AS85049/62 AS85049/63 AS85049/69 AS85049/74 AS85049/75 AS85049/76 AS85049/77 AS85049/78 AS85049/79 AS85049/80 Dimensions in inches (c) 2013 Glenair, Inc. B-78 B-79 B-80 B-81 B-82 B-83 B-84 B-85 B-86 B-87 B-88 B-89 B-90 B-91 B-92 B-93 B-94 Page Part Number B-96 AS85049/81 AS85049/82 B-97 AS85049/83 AS85049/84 AS85049/85 B-99 AS85049/86 AS85049/87 AS85049/88 B-101 AS85049/89 AS85049/90 AS85049/91 B-103 AS85049/92 B-104 AS85049/93 B-105 AS85049/94 B-106 AS85049/95 B-107 AS85049/96 B-108 AS85049/103 B-110 AS85049/104 B-112 AS85049/105 B-114 AS85049/109 B-116 AS85049/111 B-118 AS85049/112 B-120 AS85049/114 B-122 AS85049/115 B-124 AS85049/118 B-126 AS85049/120 B-128 AS85049/121 B-130 AS85049/123 B-132 AS85049/124 B-134 AS85049/126 B-136 AS85049/127 AS85049/128-3 B-137 AS85049/128-4 B-138 AS85049/130 B-140 AS85049/139 B-142 B-144 AS85049/140 B-146 B-148 B-150 B-152 AS85049/141 B-154 B-156 B-158 AS85049/142 B-160 G-5 MIL-DTL-26500 (millimeters) and are subject U.S. CAGE Code 06324 Part Number MIL-DTL-26500 MIL-DTL-28840/1 MIL-DTL-28840/2 MIL-DTL-28840/3 MIL-DTL-28840/4 MIL-DTL-28840/5 MIL-DTL-28840/6 MIL-DTL-28840/7 MIL-DTL-28840/8 MIL-DTL-28840/9 MIL-DTL-83723/59 MIL-DTL-83723/60 MIL-DTL-83723/59 MIL-DTL-83723/60 MIL-DTL-83723/70 MIL-S-81824/1 MS17349 MS17350 MS27291 J Quick-Reference Part Number Index E-7 E-8 E-9 G-17 G-3 G-4 I to change without notice. CA 91201-2497 AIR WAY * GLENDALE, GLENAIR, INC. * 1211 Quick-Reference Page G-6 D-2 D-3 D-4 D-5 D-6 D-7 D-8 D-9 D-10 D-11 D-12 D-13 MIL-DTL-28840/13 D-14 MIL-DTL-28840/15 D-15 MIL-DTL-28840/22 D-16 MIL-DTL-28840/23 D-17 MIL-DTL-28840/24 MIL-DTL-38999 C-2 MIL-DTL-38999 C-3 MIL-DTL-38999 C-4 MIL-DTL-38999/22 C-5 MIL-DTL-38999/28 C-6 MIL-DTL-38999/32 MIL-DTL-38999/33 C-7 MIL-DTL-38999/50 G-15 MIL-DTL-83513/05 G-16 MIL-DTL-83538/9 E-2 MIL-DTL-83723/27 E-3 E-4 MIL-DTL-83723/35 E-5 E-6 MIL-DTL-83723/50 Printed in U.S.A. 818-500-9912 * 818-247-6000 * FAX E-Mail: sales@glenair.com www.glenair.com (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com A-1 E-Mail: sales@glenair.com INDEX AND INTRODUCTION Military Standard Backshells and Accessories Part and Page Number Index SECTION B * AS85049 QUALIFIED PRODUCTS * SECTION B A Industry Specification Number AS85049/1 AS85049/2 Part Identification Number M85049/1 M85049/2 Military Part Number Superseded MS3057 "B" MS3057 "C" Glenair Commercial Part Number Description 620-053 Style B Straight Strain Relief 620-053 Style C Straight Environmental Strain Relief Glenair Connector Designator/ Interface MS "V" Thread MS "V" Thread AS85049/3 M85049/3 Style 1 MS17340/MS90571 Style 1 M85049/3 Style 2 MS17340/MS90571 Style 2 M85049/3 Style 3 MS17340/MS90571 Style 3 GS85049/3 377 Straight Environmental Backshell "C" MIL-DTL-22992, C, J & R AS85049/4 M85049/4 Style 1 MS17342/MS90569 Style 1 M85049/4 Style 2 MS17342/MS90569 Style 2 M85049/4 Style 3 MS17342/MS90569 Style 3 GS85049/4 377 Straight Step-Up Environmental Backshell "C" MIL-DTL-22992, C, J & R AS85049/5 M85049/5 Style 1 MS17341/MS90570 Style 1 M85049/5 Style 2 MS17341/MS90570 Style 2 M85049/5 Style 3 MS17341/MS90570 Style 3 377-034 Straight Step-Down Environmental Backshell "C" MIL-DTL-22992, C, J & R AS85049/6 M85049/6 MS3189A 390AB001 45 RFI/EMI Environmental Backshell AS85049/7 M85049/7 MS3189B 370AB001 45 Environmental Backshell AS85049/8 M85049/8 MS3188A 390AA001 90 RFI/EMI Environmental Backshell AS85049/9 M85049/9 MS3188B 360-061 AS85049/10 M85049/10 MS3437A 390AS001 Straight RFI/EMI Environmental Backshell AS85049/11 M85049/11 MS3437B 370AS001 Straight Environmental Backshell MIL-C-85049/14 610HS011 AS85049/14 AS85049/15 AS85049/16 M85049/14M85049/14 N M85049/14 S M85049/15M85049/15 N M85049/15 S M85049/15 G M85049/15 H M85049/16M85049/16 N M85049/16 S M85049/16 G M85049/16 H MIL-C-85049/15 MIL-C-85049/16 450HB001 450HB041 450HB043 450HB043 "G" 450HB041 "G" 450HA001 450HA041 450HA043 450HA043 "G" 450HA041 "G" 90 Environmental Backshell E Nut E Nut, Non-Detented, Self Locking E Nut, Detented, Self-Locking 45 Qwik-Ty(R) Strain Relief Non-Detented, Self-Locking Detented Self-Locking Detented, Self-Locking, Ground Lug Non-Detented Self-Locking, Ground Lug 90 Qwik-Ty(R) Strain Relief Non-Detented, Self-Locking Detented Self-Locking Detented, Self-Locking, Ground Lug Non-Detented Self-Locking, Ground Lug AS85049/17 M85049/17 MIL-C-38999/5 390FS012 Straight RFI/EMI Environmental Backshell AS85049/18 M85049/18 MIL-C-85049/18 390HS011 Straight RFI/EMI Environmental Backshell AS85049/19 M85049/19 MIL-C-85049/19 380HS007 Straight Environmental Backshell (c) 2013 Glenair, Inc. "A" AS50151; MIL-DTL-26482, Series 2; AS81703 Series 3; MIL-DTL-83723, Series III "A" AS50151; MIL-DTL-26482, Series 2; AS81703 Series 3; MIL-DTL-83723, Series III "A" AS50151; MIL-DTL-26482, Series 2; AS81703 Series 3; MIL-DTL-83723, Series III "A" AS50151; MIL-DTL-26482, Series 2; AS81703 Series 3; MIL-DTL-83723, Series III "A" AS50151; MIL-DTL-26482, Series 2; AS81703 Series 3; MIL-DTL-83723, Series III "A" AS50151; MIL-DTL-26482, Series 2; AS81703 Series 3; MIL-DTL-83723, Series III "H" MIL-DTL-38999, Ser. III & IV EN3645 B-2 B-3 B-4 B-5 B-6 B-7 B-9 B-11 B-13 B-15 B-17 B-19 B-21 B-23 B-25 B-27 B-31 B-35 "H" MIL-DTL-38999, Ser. III & IV; EN3645 B-36 "H" MIL-DTL-38999, Ser. III & IV; EN3645 B-36 "F" MIL-DTL-38999 Series I & II "H" MIL-DTL-38999, Ser. III & IV; EN3645 "H" MIL-DTL-38999, Ser. III & IV; EN3645 Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells and Accessories U.S. CAGE Code 06324 Page No. B-37 B-38 B-39 Rev. 5/30/14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com A-2 E-Mail: sales@glenair.com INDEX AND INTRODUCTION Military Standard Backshells and Accessories Part and Page Number Index SECTION B * AS85049 QUALIFIED PRODUCTS * SECTION B Industry Specification Number Part Identification Number Military Part Number Superseded Glenair Commercial Part Number Description AS85049/20 M85049/20 MIL-C-85049/20 440HS063 Straight Crimp Ring Backshell and Crimp Ring AS85049/21 M85049/21 MIL-C-85049/21 360HS002 Straight Non-Environmental Strain Relief Backshell AS85049/23 M85049/23 MS3189C 380AB001 45 RFI-EMI Non-Environmental Backshell AS85049/24 M85049/24 MS3188C 390AA001 90 RFI-EMI Non-Environmental Backshell AS85049/25 M85049/25 MS3437C 380AS001 Straight RFI-EMI Non-Environmental Backshell AS85049/26 M85049/26-1 M85049/26-2 M85049/26-3 MS3419 MS3161 MIL-C-85049/26-3 440AS063 687-150 Adapter Only Crimp Ring Only Adapter with Crimp Ring MIL-DTL-38999/1 610FS011 M83733/15 G61570 AS85049/28 M85049/27M85049/27 N M85049/27 S M85049/28 AS85049/29 M85049/29 MIL-DTL-38999/6 360FS002 AS85049/30 M85049/30 MIL-DTL-38999/4 400FS001 AS85049/31 M85049/31M85049/31 N M85049/31 S MS3416 610AS011 AS85049/33 M85049/33-2 MIL-DTL-38999/2 440FS063 AS85049/34 M85049/34 MS3484 320 AS85049/36 M85049/36 MIL-DTL-38999/7 380FS008 Straight RFI-EMI Non-Environmental Backshell AS85049/37 M85049/37 MIL-DTL-38999/8 380FD007 90 RFI-EMI Non-Environmental Backshell AS85049/38 M85049/38 N M85049/38 S MIL-C-85049/38- 620HS011 620HS048 Str. Strain Relief, Non-Detented Self-Locking Straight Strain Relief, Detented Self-Locking AS85049/39 M85049/39 MIL-C-85049/39 620HA011 620HA048 90 Strain Relief, Non-Detented Self-Locking 90 Strain Relief, Detented Self-Locking AS85049/41 AS85049/42 AS85049/43 AS85049/44 M85049/41 M85049/42 M85049/43 M85049/44 MS3057A MS3057D MS3415 M83733/16 620-053 Style A 620-053 Style H 620AB047 G61257 Straight Strain Relief Straight Strain Relief 45 Strain Relief Straight Rectangular Strain Relief Backshell AS85049/45 M85049/45 MS27663 440FS037 Straight Strain Relief AS85049/46 M85049/46 MS27663 440FA037 90 Non-Self-Locking Composite Strain Relief AS85049/27 (c) 2013 Glenair, Inc. E Nut E Nut, Non-Detented, Self-Locking E Nut, Detented, Self-Locking Strt. Rectangular Non-Environmental Backshell Straight Non-Environmental Strain Relief Backshell Straight RFI-EMI Individual Shield Termination Backshell E Nut E Nut, Non-Detented, Self-Locking E Nut, Detented, Self Locking Straight Crimp Ring Non-Environmental Backshell Straight Adapter and Extender For use with MS3114 & MS3124 Connectors Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Glenair Connector Designator/ Interface "H" MIL-DTL-38999, Ser. III & IV; EN3645 "H" MIL-DTL-38999, Ser. III & IV; EN3645 "A" AS50151; MIL-DTL-26482, Series 2; AS81703 Series 3; MIL-DTL-83723, Series III "A" AS50151; MIL-DTL-26482, Series 2; AS81703 Series 3; MIL-DTL-83723, Series III "A" AS50151; MIL-DTL-26482, Series 2; AS81703 Series 3; MIL-DTL-83723, Series III "A" AS50151; MIL-DTL-26482, Series 2; AS81703 Series 3; MIL-DTL-83723, Series III "F" MIL-DTL-38999 Series I & II -- "F" MIL-DTL-38999 Series I & II "F" MIL-DTL-38999 Series I & II "A" AS50151; MIL-DTL-26482, Series 2; AS81703 Series 3; MIL-DTL-83723, Series III "F" MIL-DTL-38999 Series I & II "D" MIL-DTL-26482 Series I "F" MIL-DTL-38999 Series I & II "F" MIL-DTL-38999 Series I & II ""H" MIL-DTL-38999 Series III & IV EN3645 "H" MIL-DTL-38999 Series III & IV; EN3645 MS "V" Thread MS "V" Thread -- -- "F" MIL-DTL-38999 Series I & II "F" MIL-DTL-38999 Series I & II Page No. B-41 B-42 B-43 B-45 B-47 B-51 B-52 B-53 B-54 B-55 B-56 B-57 B-58 B-59 B-60 B-61 B-62 B-63 B-64 B-65 B-66 B-67 B-68 B-69 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com A-3 E-Mail: sales@glenair.com A INDEX AND INTRODUCTION Military Standard Backshells and Accessories Part and Page Number Index SECTION B * AS85049 QUALIFIED PRODUCTS * SECTION B A Industry Specification Number Part Identification Number Military Part Number Superseded Glenair Commercial Part Number AS85049/47 M85049/47 MS27507 620FA012 AS85049/48 M85049/48-1 M85049/48-2 M85049/48-3 M24308/20 M24308/21 M24308/22 GS85049/48 550/557 AS85049/49 M85049/49-2 MS27506 620FS054 AS85049/50 M85049/50 MS24308/19 GS85049/50 550/557 Glenair Connector Designator/ Interface "F" MIL-DTL-38999 Series I & II Description 90 Self-Locking or Non-Self-Locking Strain Relief Rectangular Strain Relief Backshell Straight Strain Relief Rectangular Strain Relief Backshell Page No. B-70 MIL-DTL-24308 B-71 B-72 B-73 "F" MIL-DTL-38999 Series I & II B-74 MIL-DTL-24308 B-75 "A" AS50151; MIL-DTL-26482, Series 2; AS81703 Series 3; MIL-DTL-83723, Series III "A" AS50151; MIL-DTL-26482, Series 2; AS81703 Series 3; MIL-DTL-83723, Series III "A" AS50151; MIL-DTL-26482, Series 2; AS81703 Series 3; MIL-DTL-83723, Series III "F" MIL-DTL-38999 Ser. I & II "F" MIL-DTL-38999 Ser. I & II "C" MIL-DTL-22992 "A" AS50151; MIL-DTL-26482, Series 2; AS81703 Series 3; MIL-DTL-83723, Series III AS85049/51 M85049/51 MS3418 620AA046 90 Self-Locking or Non-Self-Locking Strain Relief AS85049/52 M85049/52 MS3417 620AS046 Straight Self-Locking or Non-Self-Locking Strain Relief AS85049/53 AS85049/54 AS85049/55 M85049/53 M85049/54 M85049/55 MS3152 MS3153 MS3154 450AS001 450BS001 450AA001 Straight Qwik-Ty(R) Strain Relief 45 Qwik-Ty(R) Strain Relief 90 Qwik-Ty(R) Strain Relief AS85049/56 AS85049/57 M85049/56 M85049/57 MS27668 MS27669 Straight Qwik-Ty(R) Strain Relief 45 Qwik-Ty(R) Strain Relief AS85049/58 M85049/58 MS27485 450FS001 450FB001 GS85049/58 310 AS85049/59 M85049/59 MS90568 310CS002 Straight Shrink Boot Adapter AS85049/60 M85049/60-1 M85049/60-2G MS3158 MS3416 310AS001 310AS002 Straight Shrink Boot Adapter Straight Shrink Boot Adapter AS85049/61 M85049/61 MS27332 GS85049/61 310 AS85049/62 M85049/62 M38999/2 310FS001 Straight Shrink Boot Adapter AS85049/63 M85049/63 MS27670 450FA001 90 Qwik-Ty(R) Strain Relief AS85049/69 M85049/69 MIL-C-85049/69 310HS001 Straight Shrink Boot Adapter AS85049/74 M85049/74 MS27333 B-88 M85049/75 MS27486 Potting Boot for Use with AS85049/61 Potting Boot Ring (Page B-84) Potting Boot for Use with AS85049/58 Potting Boot Ring (Page B-80) -- AS85049/75 GS85049/74 687 GS85049/75 687 -- B-89 AS85049/76 M85049/76 MIL-C-85049/76 390FL011 90 EMI/RFI Environmental Backshell AS85049/77 M85049/77 MIL-C-85049/77 390FK011 45 EMI/RFI Environmental Backshell AS85049/78 M85049/78 MIL-C-85049/78 390HK011 45 EMI/RFI Environmental Backshell AS85049/79 MIL-C-85049/79 390HL011 390HL011 90 EMI/RFI Environmental Backshell "F" MIL-DTL-38999 Ser. I & II "F" MIL-DTL-38999 Ser. I & II "H" MIL-DTL-38999 Ser. III & IV EN3645 "H" MIL-DTL-38999 Ser. III & IV EN3645 AS85049/80 M85049/80 MIL-C-85049/80 GS85049/80 687 (c) 2013 Glenair, Inc. Potting Boot Ring Potting Boot Ring MIL-DTL-27599 "F" MIL-DTL-38999 Ser. I & II "F" MIL-DTL-38999 Ser. I & II "H" MIL-DTL-38999 Ser. III & IV EN3645 Sealing Plug, Sizes 8, 12 and 16 MIL-DTL-38999 Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 B-76 B-77 B-78 B-79 B-80 B-81 B-82 B-83 B-84 B-85 B-86 B-87 B-90 B-91 B-92 B-93 B-94 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com A-4 E-Mail: sales@glenair.com INDEX AND INTRODUCTION Military Standard Backshells and Accessories Part and Page Number Index SECTION B * AS85049 QUALIFIED PRODUCTS * SECTION B Industry Specification Number Part Identification Number Military Part Number Superseded AS85049/81 M85049/81 MIL-C-85049/81 Glenair Commercial Part Number GS85049/81 687 AS85049/82 AS85049/83 AS85049/84 M85049/82 M85049/83 M85049/84 MIL-C-85049/82 MIL-C-85049/83 MIL-C-85049/84 440AS069 440AH069 440AJ069 Straight Banding Backshell 45 Banding Backshell 90 Banding Backshell AS85049/85 AS85049/86 AS85049/87 AS85049/88 AS85049/89 AS85049/90 M85049/85 M85049/86 M85049/87 M85049/88 M85049/89 M85049/90 MIL-C-85049/85 MIL-C-85049/86 MIL-C-85049/87 MIL-C-85049/88 MIL-C-85049/89 MIL-C-85049/90 440FS069 440FH069 440FJ069 440HS069 440HH069 440-HJ069 Straight Banding Backshell 45 Banding Backshell 90 Banding Backshell Straight Banding Backshell 45 Banding Backshell 90 Banding Backshell AS85049/91 AS85049/92 M85049/91 M85049/92 MIL-C-85049/91 MIL-C-85049/92 620HS042 620HA042 Straight Strain Relief 90 Strain Relief AS85049/93 M85049/93 MIL-C-85049/93 AS85049/94 M85049/94 MIL-C-88528/1 AS85049/95 M85049/95 MIL-C-88528/2 AS85049/96 M85049/96 MIL-C-88528/3 687-207 GS85049/94 687 GS85049/95 687 GS85049/96 687 AS85049/103 M85049/103 -- 447HS557 AS85049/104 M85049/104 -- 447HB557 AS85049/105 M85049/105 -- 447HA557 AS85049/109 M85049/109 88064 319AS001 Straight Shield Sock Shrink Boot Adapter with Detented or Non-Detented Self-Locking or Non-Self Locking Coupling Nut AS85049/111 M85049/111 89018 319AJ001 90 Shield Sock Sock Shrink Boot Adapter with Optional Self-Locking Coupling Nut AS85049/112 M85049/112 89014 319FS001 AS85049/114 M85049/114 89016 319FJ001 Straight Shield Sock Sock Shrink Boot Adapter with Optional Self-Locking Coupling Nut 90 Shield Sock Shrink Boot Adapter with Detented or Non-Detented Self-Locking Coupling Nut AS85049/115 M85049/115 89013 319HS001 Straight Shield Sock Shrink Boot Adapter with Optional Self-Locking Coupling Nut AS85049/118 M85049/118 -- 620AS038 Straight Strain Relief, Self-Locking or Non-Self-Locking AS85049/120 M85049/120 -- 620AA038 90 Strain Relief, Self-Locking or Non-Self-Locking AS85049/121 M85049/121 -- 620FS038 Straight Strain Relief, Self-Locking or Non-Self-Locking (c) 2013 Glenair, Inc. Description Sealing Plug Glenair Connector Designator/ Interface Page No. MIL-DTL-38999 B-96 "A" AS50151; MIL-DTL-26482, Series 2; AS81703 Series 3; MIL-DTL-83723, Series III "F" MIL-DTL-38999 Series I & I "H" MIL-DTL-38999 Ser. III & IV EN3645 "H" MIL-DTL-38999 Ser. III & IV EN3645 -- Banding Split Ring B-97 B-99 B-101 B-103 B-104 Full Perimeter Mounting Flange -- B-105 3/4 Perimeter Mounting Flange -- B-106 1/4 Perimeter Mounting Flange -- B-107 Straight Shield Sock Composite Adapter with Detented or Non-Detented Self-Locking Coupling Nut 45 Shield Sock Composite Adapter with Detented or Non-Detented Self-Locking Coupling Nut 90 Shield Sock Composite Adapter with Detented or Non-Detented Self-Locking Coupling Nut "H" MIL-DTL-38999 Ser. III & IV EN3645 "H" MIL-DTL-38999 Ser. III & IV EN3645 "H" MIL-DTL-38999 Ser. III & IV EN3645 "A" AS50151; MIL-DTL-26482, Series 2; AS81703 Series 3; MIL-DTL-83723, Series III "A" AS50151; MIL-DTL-26482, Series 2; AS81703 Series 3; MIL-DTL-83723, Series III "F" MIL-DTL-38999 Series I & II "F" MIL-DTL-38999 Series I & II "H" MIL-DTL-38999 Ser. III & IV EN3645 "A" AS50151; MIL-DTL-26482, Series 2; AS81703 Series 3; MIL-DTL-83723, Series III "A" AS50151; MIL-DTL-26482, Series 2; AS81703 Series 3; MIL-DTL-83723, Series III "F" MIL-DTL-38999 Series I & II; MIL-DTL-27599 Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 B-108 B-110 B-112 B-114 B-116 B-118 B-120 B-122 B-124 B-126 B-128 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com A-5 E-Mail: sales@glenair.com A INDEX AND INTRODUCTION Military Standard Backshells and Accessories Part and Page Number Index SECTION B * AS85049 QUALIFIED PRODUCTS * SECTION B A Industry Specification Number Part Identification Number Military Part Number Superseded Glenair Commercial Part Number AS85049/123 M85049/123 -- 620FA038 90 Strain Relief, Self-Locking or Non-Self-Locking AS85049/124 M85049/124 -- 620HS038 Sraight Strain Relief, Self-Locking or Non-Self-Locking AS85049/126 M85049/126 -- 620HA038 90 Strain Relief, Self-Locking or Non-Self-Locking AS85049/127 AS85049/128-3 AS85049/128-4 AS85049/130 M85049/127 M85049/128-3 M85049/128-4 M85049/130 -- -- Bushing Strip Standard Clamping Band Precoiled Standard Clamping Band Gasket AS85049/139 M85049/139 MS3420 687-581 600-052 600-052-1 Consult Factory GS85049/139 687 AS85049/140 M85049/140-05 M85049/140-09 M85049/140-20 M85049/140-25 MS3109 AS85049/141 M85049/141-03 M85049/141-10 M85049/141-19 MS3117 AS85049/142 M85049/142-02 M85049/142-05 M85049/142-10 -- -- Glenair Connector Designator/ Interface "F" MIL-DTL-38999 Series I & II; MIL-DTL-27599 "H" MIL-DTL-38999 Ser. III & IV EN3645 "H" MIL-DTL-38999 Ser. III & IV EN3645 -- B-136 AS85049/128 B-137 -- B-138 Telescoping Bushing, C or L -- B-140 770-003S107 770-006S102W1 770-007S104 770-018S102 Straight Lipped Heat Shrink Boot Str. Lipped Long Tail Low Profile H.S. Boot Str. Lipped Mini. Long Tail Low Profile H.S. Boot Straight Lipped Sealing Heat Shrink Boot -- 770-003A105 770-006A103 770-007A103 90 Lipped Heat Shrink Boot 90 Lipped Low Profile Heat Shrink Boot 90 Lipped Mini. Low Profile Heat Shrink Boot -- 770-011T102 Tee Transition Wide Body Heat Shrink Boot 770-010Y105 Wye Transition Wide Body Heat Shrink Boot 770-013110W1 1:3 Transition Wide Body Heat Shrink Boot -- Description Page No. B-130 B-132 B-134 B-142 B-144 B-146 B-148 B-150 B-152 B-154 B-156 B-158 B-160 SECTION C * MIL-DTL-38999 QUALIFIED PRODUCTS * SECTION C Industry Specification Number MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999/22 Part Identification Number MS27501 MS27502 MS27510 MS27511 D38999/22 Military Part Number Superseded MS20048 MS20047 MS27352 MS27353 -- Glenair Commercial Part Number 660-012 660-013 660-014 660-015 650HS010 MIL-DTL-38999/28 D38999/28 -- Consult Factory MIL-DTL-38999/32 MIL-DTL-38999/33 MIL-DTL-38999/50 D38999/32 D38999/33 D38999/50 -- 660-023 660-024 650HS007 MIL-DTL-38999 (c) 2013 Glenair, Inc. -- Description Protective Plug Cover Protective Receptacle Cover Protective Plug Cover Protective Receptacle Cover Dummy Storage Receptacle, Threaded Coupling Jam Nut with Safety Wire Holes Composite or Metal Threaded Plug Cover Composite or Metal Threaded Receptacle Cover Dummy Storage Receptacle, Bayonet Coupling Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Glenair Connector Designator/ Interface Page No. MIL-DTL-38999 Series I C-2 MIL-DTL-38999 Series II C-3 MIL-DTL-38999, Series III MIL-DTL-38999 Series III & IV; EN3645 C-4 C-5 MIL-DTL-38999, Series III C-6 MIL-DTL-38999, Series IV C-7 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com A-6 E-Mail: sales@glenair.com INDEX AND INTRODUCTION Military Standard Backshells and Accessories Part and Page Number Index SECTION D * MIL-DTL-28840 QUALIFIED PRODUCTS * SECTION D Industry Specification Number Part Identification Number Military Part Number Superseded Glenair Commercial Part Number MIL-DTL-28840/1 M28840/1 -- 620GS051 Straight Non-Self-Locking Strain Relief MIL-DTL-28840/2 M28840/2 -- 620GA051 90 Non-Self-Locking Strain Relief MIL-DTL-28840/3 M28840/3 -- 620GB051 45 Non-Self-Locking Strain Relief MIL-DTL-28840/4 M28840/4 -- -- Metal-Core Conduit MIL-DTL-28840/5 M28840/5 -- -- Straight Backshell for Metal-Core Conduit MIL-DTL-28840/6 M28840/6 A M28840/6 B -- 390AB001 370 Series Strt. EMI/RFI Environmental Backshell, Style A Straight Environmental Backshell, Style B MIL-DTL-28840/7 M28840/7 -- 650GS001 Dummy Storage Receptacle, Threaded Coupling MIL-DTL-28840/8 -- 390-061 -- 390-061 MIL-DTL-28840/13 MIL-DTL-28840/15 M28840/8M28840/8 A M28840/9 B M28840/9 A M28840/13 M28840/15 -- 660-011 660-010 MIL-DTL-28840/22 M28840/22 -- -- MIL-DTL-28840/23 M28840/23 -- Consult Factory E Nut, Non-Self-Locking MIL-DTL-28840/24 M28840/24 -- Consult Factory Gasket Industry Specification Number Part Identification Number Military Part Number Superseded Glenair Commercial Part Number MIL-DTL-83723/27 M83723/27M -- 310KS002 -- Consult Factory -- Consult Factory MS27292 MS27293 MS27294 MS27295 -- 660-021 660-022 660-019 660-020 Consult Factory MIL-DTL-28840/9 Description 90 Environmental Backshell, Style A 90 EMI/RFI Environmental Backshell, Style B 45 Environmental Backshell, Style A 45 EMI/RFI Environmental Backshell Protective Threaded Receptacle Cover Protective Threaded Plug Cover Glenair Connector Designator/ Interface "G" MIL-DTL-28840 "G" MIL-DTL-28840 "G" MIL-DTL-28840 "G" MIL-DTL-28840 "G" MIL-DTL-28840 "G" MIL-DTL-28840 "G" MIL-DTL-28840 "G" MIL-DTL-28840 "G" MIL-DTL-28840 MIL-DTL-28840 "G" MIL-DTL-28840 "G" MIL-DTL-28840 "G" MIL-DTL-28840 Metal-Core Conduit Bushing Page No. D-2 D-3 D-4 D-5 D-6 D-7 D-8 D-9 D-10 D-11 D-12 D-13 D-14 D-15 D-16 D-17 SECTION E * MIL-DTL-83723 QUALIFIED PRODUCTS * SECTION E MIL-DTL-83723/35 MIL-DTL-83723/50 MIL-DTL-83723/59 MIL-DTL-83723/60 MIL-DTL-83723/59 MIL-DTL-83723/60 MIL-DTL-83723/70 M83723/35S M83723/35A M83723/35N M83723/50 R M83723/50 B M83723/50 A M83723/59-1 M83723/60-1 M83723/59-2 M83723/60-2 M83723/70 (c) 2013 Glenair, Inc. Glenair Connector Designator/ Interface "K" MIL-DTL-83723 Series II Description Straight Shrink Boot Adapter Strt. Non-Environmental Strain Relief Backshell 90 Non-Environmental Strain Relief Backshell Non-Self-Locking E-Nut Straight Qwik-Ty(R) Strain Relief 45 Qwik-Ty(R) Strain Relief 90 Qwik-Ty(R) Strain Relief Protective Plug Cover, Threaded Coupling Protective Receptacle Cover, Threaded Coupling Protective Plug Cover Bayonet Coupling Protective Receptacle Cover Bayonet Coupling Straight Quick Disconnect Receptacle Adapter Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells and Accessories U.S. CAGE Code 06324 Page No. E-2 "K" MIL-DTL-83723 Series II E-3 E-4 E-5 K" MIL-DTL-83723 Series II E-6 MIL-DTL-83723, Series III E-7 MIL-DTL-83723, Series III E-8 -- E-9 Rev. 5/30/14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com A-7 E-Mail: sales@glenair.com A INDEX AND INTRODUCTION Military Standard Backshells and Accessories Part and Page Number Index SECTION F * AS81511 QUALIFIED PRODUCTS * SECTION F A Industry Specification Number Part Identification Number Military Part Number Superseded Glenair Commercial Part Number AS81511/13 M81511/13 -- 620JS001 AS81511/14 -- AS81511/17 AS81511/18 AS81511/19 AS81511/20 AS81511/29 M81511/14 A M81511/14 B M81511/14 C M81511/14 D M81511/17 M81511/18 M81511/19 M81511/20 M81511/29 -- -- -- 390JS012 390JS012 380JS008 380JS008 660-017 660-018 650JS002 Consult Factory 660-016 AS81511/30 M81511/30 -- 650JS001 Industry Specification Number AS25042 AS25043 MS17349 MS17350 Part Identification Number MS25042 MS25043 MS17349 MS17350 Military Part Number Superseded MS25042 MS25043 MS27291 AS81511/14 -- -- Glenair Connector Designator/ Interface "J" AS81511 Series I, II, III & IV "J" AS81511 Series I, II, III & IV "J" AS81511 Series I, II, III & IV Description Straight Non-Self-Locking Strain Relief Straight EMI/RFI Environmental Backshell A Straight EMI/RFI Environmental Backshell B Str. EMI/RFI Non-Environmental Backshell C Str. EMI/RFI Non-Environmental Backshell D Protective Plug Cover Protective Receptacle Cover Dummy Storage Receptacle Jam Nut Protective Plug Cover Dummy Storage Receptacle Bayonet Coupling Page No. F-2 F-3 F-5 AS81511 Series I, II, III & IV F-7 AS81511 Series I, II, III & IV AS81511 Series I, II, III & IV AS81511 Series I, II, III & IV MIL-DTL-26500 and MIL-DTL-83723, Series III F-8 F-9 F-7 F-10 SECTION G * MISCELLANEOUS QUALIFIED PRODUCTS * SECTION G -- Glenair Commercial Part Number 660-004 660-005 660-007 660-006 Description Threaded Protective Plug Cover Threaded Protective Receptacle Cover Threaded Protective Receptacle Cover Threaded Protective Plug Cover MS27291 -- 620ES050 Straight Non-Self-Locking Strain Relief MIL-DTL-26500 MS27558 -- G2221-A 90 Non-Self-Locking Strain Relief MIL-DTL-26500 MS27559 -- G2221-B 90 Non-Self-Locking Strain Relief -- MS27741 -- 410-003 AS50151 -- MS3105 MS3115 MS3180 MS3181 -- -- 650BS001 650DS001 660-008 660-009 TAG Ring for Reliable Terminations Dummy Storage Receptacle, Threaded Coupling Dummy Storage Receptacle, Bayonet Coupling Protective Plug Cover, Bayonet Coupling Protectiove Receptacle Cover, Bayonet Coupling -- -- (R) -- MS27512 MS3186 Consult Factory Jam Nut with Safety Wire Holes -- -- MIL-DTL-83513/05 MIL-DTL-83538/9 MIL-S-81824/1 M29504/04 M29504/05 M83513/05 M83538/9S M81824/1 -- -- -- -- -- Consult Factory Consult Factory Consult Factory Consult Factory 070-001 Fiber Optic Pin Terminus, Size 16 Fiber Optic Socket Terminus, Size 16 Micro-D Jackscrew Kits Straight Adapter and Extender In-Line Splice, Insulated and Environmental (c) 2013 Glenair, Inc. Glenair Connector Designator/ Interface Page No. AS50151 G-2 MIL-DTL-22992 G-3 "E" MIL-DTL-26500 "E" MIL-DTL-26500 "E" MIL-DTL-26500 -- AS50151 MIL-DTL-26482 G-6 MIL-DTL-26482 G-10 AS50151; MIL-DTL-26482; MIL-DTL-26500; MIL-DTL-83723 Series I; MIL-DTL-83723, Series III MIL-DTL-38999 Series I; MIL-DTL38999 Series II; MIL-DTL-28840; MIL-DTL-27599 MIL-DTL-29504 MIL-DTL-29504 MIL-DTL-83513/05 MIL-DTL-83538/4 -- Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells and Accessories U.S. CAGE Code 06324 Rev 8-19-14 G-4 G-5 G-7 G-8 G-9 G-11 G-13 G-14 G-15 G-16 G-17 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com A-8 E-Mail: sales@glenair.com INDEX AND INTRODUCTION Military Standard Backshells and Accessories Part and Page Number Index SECTION H * GLENAIR QUALIFIED TOOLS * SECTION H Industry Specification Number Part Identification Number Military Part Number Superseded Glenair Commercial Part Number -- -- -- TG37 Description Connector Wrench for MIL-DTL-26500 and MIL-DTL-83723 Series III -- MS3481 -- TG39 Connector Wrench for MIL-DTL-26482, Ser. I & II; MIL-DTL-83723, Ser. I & NAS 1599 -- -- -- TG47 -- -- -- TG48 -- -- -- TG52 -- -- -- TG60 -- -- -- -- -- -- TG83 TG90 -- -- -- 600B005 -- -- -- 600C005 -- -- -- 600D005 -- -- -- 600E005 -- -- -- 600F005 -- -- -- 600FF005 -- -- -- 600G005 -- -- -- 600H005 -- -- -- 600HH005 -- -- -- 600J005 Connector Wrench for MIL-DTL-22992, Classes C, J and R Connector Wrench for MIL-DTL-38999, Series II Connector Wrench for MIL-C-81511, MIL-C-81511 Series II & IV Series II and IV Connector Wrench for MIL-DTL-27599 and MIL-DTL-27599; MIL-DTL-38999, Series I MIL-DTL-38999 Series I Wrench for SJT Connectors (LN29729) LN29729 Connector Wrench For MIL-DTL-38999, Ser III MIL-DTL-38999 Series III Plug and Receptacle Holder for MIL-DTL-50155 Series MS3100 MIL-DTL-5015555 Series MS3100 Solder & Crimp Solder and Crimp; and MIL-DTL-83723, Series II MIL-DTL-83723 Series II Plug and Receptacle Holder for MIL-DTL-22992 MIL-DTL-22992 Classes C, J and R Classes C, J and R Plug and Receptacle Holder for MIL-DTL-26482 Series I & II; MIL-DTL-26482, Series I and II, MIL-DTL-83723 Series I; MIL-DTL-83723, Series I and NAS 1599 NAS 1599 Plug and Receptacle Holder for MIL-DTL-26500 MIL-DTL-26500; and MIL-DTL-83723 Series III MIL-DTL-83723 Series III Plug and Receptacle Holder for MIL-DTL-27599 MIL-DTL-27599; and MIL-DTL-38999 Series I MIL-DTL-38999 Series I Plug and Receptacle Holder for MIL-DTL-38999 Series II MIL-DTL-38999, Series II Plug and Recetacle Holder for MIL-DTL-28840 MIL-DTL-28840 Plug and Receptacle Holder for MIL-DTL-38999 Series III MIL-DTL-38999, Series III Plug and Receptacle Holder for MIL-DTL-38999 Series IV MIL-DTL-38999, Series IV Plug and Receptacle Holder for MIL-DTL-81511 MIL-DTL-81511, Series I, II, III and IV Series I, II, III & IV (c) 2013 Glenair, Inc. Glenair Connector Designator/ Interface MIL-DTL-26500; MIL-DTL-83723 Series III MIL-DTL-26482 Series I & II; MIL-DTL-83723 Series I; NAS 1599 MIL-DTL-22992, Classes C, J and R MIL-DTL-38999 Series II Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Page No. H-2 H-3 H-4 H-5 H-6 H-7 H-8 H-9 H-10 H-11 H-12 H-13 H-14 H-15 H-16 H-17 H-18 H-19 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com A-9 E-Mail: sales@glenair.com A INDEX AND INTRODUCTION Standard Materials, Finishes and Tolerances AS85049/GLENAIR FINISH CODE CROSS-REFERENCE A AS85049 Finish Code Recommended Glenair Accessory Finish Code Material, Finish A Aluminum, Black Anodize (RoHS Compliant) B Stainless Steel, Cadmium Plate, Black C ZU G Aluminum, Electroless Nickel Plate (Space Grade) MA J Composite, Cadmium Plate, Olive Drab XW L Composite, Cadmium Plate, Olive Drab, Selective XX M Composite, Electroless Nickel Plate (RoHS Compliant) XM N Aluminum, Electroless Nickel Plate P Aluminum, Cadmium Plate, Olive Drab, Selective S Stainless Steel, Pasivate (RoHS Compliant) Z1 T Composite, Unplated (RoHS Compliant) XO W Aluminum, Cadmium Plate, Olive Drab NF X Aluminum, Nickel Fluorocarbon Polymer (RoHS Compliant) MT XC Composite, Nickel Fluorocarbon Polymer (RoHS Compliant) XMT XS Stainless Steel, Nickel Fluorocarbon Polymer (RoHS Compliant) ZMT M NFP Y Aluminum, Pure Dense Electrodeposited Aluminum (RoHS Compliant) AL YC Composite, Pure Dense Electrodeposited Aluminum (RoHS Compliant) XAL YL Composite, Pure Dense Electrodeposited Aluminum, Selective (RoHS Compliant) XAP YP Aluminum, Pure Dense Electrodeposited Aluminum, Selective (RoHS Compliant) ALP YS Stainless Steel, Pure Dense Electrodeposited Aluminum, Selective (RoHS Compliant) ZAL Z Aluminum, Zinc Nickel, Black (RoHS Compliant) ZR ZC Composite, Zinc Nickel, Black (RoHS Compliant) XZR XZS ZL Composite, Zinc Nickel, Black, Selective (RoHS Compliant) ZP Aluminum, Zinc Nickel, Black, Selective (RoHS Compliant) ZS Stainless Steel, Zinc Nickel, Black (RoHS Compliant) Note: Every effort has been made to present accurate information in this catalog. Editorial errors that are brought to our attention will be corrected in future editions. All dimensions presented in this catalog should be confirmed by the factory prior to inclusion within designs or specifications. We are constantly incorporating product improvements and therefore Glenair reserves the right to make changes without notice. Any liability or warranty as to quality, performance, or fitness for use of Glenair products is always based on the condition that they apply to only new, unused products that are properly stored, handled, installed, used, maintained and inspected by the user in a manner appropriate for the intended use of the product. (c) 2013 Glenair, Inc. ZS ZZR TOLERANCES On all length callouts, tolerance is .060 unless otherwise specified. Unless otherwise specified, the following other dimensional tolerances will apply: .xx = .030 (.080) .xxx = .015 (0.400) Lengths = .060 (1.524) Angles = 5 Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com A-10 E-Mail: sales@glenair.com INDEX AND INTRODUCTION Recommended Torque Values INSTALLATION TORQUE VALUES FOR CIRCULAR ELECTRICAL CONNECTOR ACCESSORIES Shell Sizes Group 1 Light and Medium Duty Group 2 Heavy Duty AS50151 (AS31001 Series) MIL-DTL-26482 Series I MIL-DTL-26500 MIL-DTL-27599 MIL-DTL-38999 Series I and II MIL-C-81511 Series I, II, III and IV AS81703 Series I AS50151 (AS34001 Series) MIL-DTL-22992 MIL-DTL-26482 Series II MIL-DTL-28840 MIL-DTL-38999 Series III and IV AS81703 Series III MIL-DTL-83723 Series I, II and III Group 2 Composite Material Coupling Threads (See Note 1) Torque Requirements in Inch-Pounds 8, 9, A 30/40 51/61 35 3, 10, 10SL, 11, B 30/40 71/81 35 7, 12, 12S, 13, C 35/45 103/113 45 14, 14S, 15, D 35/45 111/121 45 16, 16S, 17, E 35/45 111/121 45 18, 19, 27, F 35/45 111/121 45 20, 21, 37, G 75/85 131/141 80 22, 23, H 75/85 131/141 80 24, 25, 61, J 75/85 131/141 80 28, 29 115/125 143/153 120 32, 33 115/125 143/153 120 36 115/125 142/153 120 40 155/165 159/169 N/A 44 155/165 159/169 N/A 48 155/165 159/169 N/A TORQUE VALUES FOR CABLE CLAMP SCREWS CABLE CLAMP WITH GROMMET - TORQUE VALUES Torque requirements in Inch-Pounds for corrosion resitant or steel plated screws only Into Aluminum or Corrosion Screw Size Resistant Steel 2-56 4-40 6-32 8-32 10-32 .250-20 Torque Requirements in Inch-Pounds Clamp Size Torque Min/Max Values 1.5/2.5 3.5/4.5 5.0/7.0 7.0/9.0 9.0/11.0 11.0/13.0 1) Use Glenair 600-091 and 600-007 Torque Tools when tightening hexagonal composite accessory couplings. 2) For additional guidance or values/conditions not listed, refer to SAE AIR6151. (c) 2013 Glenair, Inc. 3 4 6 8 10 12 16 30/40 30/40 35/55 35/55 35/55 40/60 40/60 20 40/60 24 80/100 28 80/100 32 80/100 40 80/100 EMI/RFI shielding terminated with conical metal ferrule(s) should employ a minimum recommended torque of 35 in-lb. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells and Accessories U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com A-11 E-Mail: sales@glenair.com A INDEX AND INTRODUCTION A Military Standard Connector Index The following is a list of circular connectors defined by U.S. Military Specifications, cross-referenced to the applicable active or inactive part number series. The symbols in the Connector Designator column are an essential element in Glenair's commercial backshell part number developments. MILITARY STANDARD CONNECTOR INDEX Part No. Connector Designator AS50151 Specification Series MS3100 B AS50151 AS31001 Receptacle, Wall Mtg (Solder) MS3101 B AS50151 AS31001 Receptacle MS3102 ** AS50151 AS31001 Receptacle, Box Mtg (Solder) MS3103 ** AS50151 AS31001 Receptacle, Potting (Solder) MS3105 ** AS50151 AS31001 Dummy Receptacle MS3106 B AS50151 AS31001 Plug, Straight (Solder) MS3107 B AS50151 AS31001 Plug, Quick Disconnect (Solder) MS3108 B AS50151 AS31001 MS3110 D-729 MIL-DTL-26482 1 Receptacle, Wall Mtg Description Plug, 90 (Solder) MS3111 D MIL-DTL-26482 1 Plug, Cable Connecting MS3112 ** MIL-DTL-26482 1 Receptacle, Box Mount MS3113 ** MIL-DTL-26482 1 Receptacle, Solder Mtg MS3114 D-717 MIL-DTL-26482 1 Receptacle, Jam Nut MS3115 ** MIL-DTL-26482 1-2 Dummy Receptacle MS3116 D MIL-DTL-26482 1 Plug, Straight MS3119 ** MIL-DTL-26482 1 Receptacle, Thru-Bulkhead MS3120 D MIL-DTL-26482 1 Receptacle, Wall Mtg (Crimp) MS3121 D MIL-DTL-26482 1 Plug, Straight (Crimp) MS3122 ** MIL-DTL-26482 1 Receptacle, Box Mtg (Crimp) MS3124 D-717 MIL-DTL-26482 1 Receptacle, Reart Mtg, Jam Nut (Crimp) MS3126 D MIL-DTL-26482 1 Plug, Straight (Crimp) MS3127 ** MIL-DTL-26482 1 Receptacle, Box Mtg (Crimp) MS3128 * MIL-DTL-26482 1 Plug, Straight (Crimp) MS3130 * AS81703 1 Receptacle, Push Pull, Wide Flange MS3132 X-706 AS81703 1 Receptacle, Push Pull, Box Mtg MS3134 X-706 AS81703 1 Receptacle, Push Pull, Jam Nut MS3135 ** AS81703 1 Dummy Receptacle MS3137 X-706 AS81703 1 Plug, Straight, Push Pull MS3138 X-706 AS81703 1 Plug, Lanyard, Push Pull MS3139 ** AS81703 1 Receptackle, Thru-Bulkhead MS3140 X-706B AS81703 2 Receptacle, Push Pull, Wall Mtg MS3142 ** AS81703 AS31001 Receptacle, Hermetic, Box Mtg MS3143 ** AS81703 AS31001 Receptacle, Hermetic, Solder Mount MS3144 X-706B AS81703 2 Receptacle, Push Pull, Jam Nut MS3145 ** AS81703 3 Receptacle, Hermetic, Push Pull, Box Mount MS3146 ** AS81703 3 Receptacle, Push Pull, Hermetic, Solder Mount MS3147 X-706B AS81703 2 Plug, Push Pull (Crimp) MS3148 X706B AS81703 2 Plug, Push Pull, Lanyard (Crimp) 3 Receptacle, Push Pull, Hermetic MS3149 ** AS81703 * Consult Factory ** Connector does not accommodate rear accessories. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com A-12 E-Mail: sales@glenair.com INDEX AND INTRODUCTION Military Standard Connector Index and Reference Guide Part No. Connector Designator MS3400 MS3401 MS3402 MS3404 MS3406 MS3408 MS3409 MS3412 MS3424 MS3440 MS3442 MS3443 MS3445 MS3446 MS3449 MS3450 MS3451 MS3452 MS3454 MS3456 MS3459 MS3463 MS3464 MS3466 MS3467 MS3468 MS3469 MS3470 MS3471 MS3472 MS3473 MS3474 MS3475 MS3476 MS3477 MS3479 MS17343 MS17344 MS17345 MS17346 MS17347 MS17348 MS18062 MS20026 MS20027 MS20028 MS20029 * Consult Factory (c) 2013 Glenair, Inc. A A ** A A A A A A ** ** ** * A ** A A ** A A A ** A ** A A ** A A A ** A A A ** ** C C C C C C ** * * * ** Specification Series Description AS50151 AS34001 Receptacle, Wall Mtg AS50151 AS34001 Receptacle, Cable Connecting AS50151 AS34001 Receptacle, Box Mtg AS50151 AS34001 Receptacle, Jam Nut AS50151 AS34001 Plug AS50151 AS34001 Plug, 90 AS50151 AS34001 Plug, 45 AS50151 AS34001 Receptacle, Wall Mtg AS81703 3 Receptacle, Push Pull, Wall Mtg MIL-DTL-26482 2 Receptacle, Narrow Flange Mtg (Was M83723/9/10) MIL-DTL-26482 2 Receptacle, Wide Flange Mtg MIL-DTL-26482 2 Receptacle, Solder Flange Mtg AS81703 2 Plug, push Pull, Rack and Panel Mtg AS81703 3 Plug, Rack and Panel MIL-DTL-26482 2 Receptacle, Single Hole Mtg AS50151 AS34501 Receptacle, Wall Mtg (Was M83723/9/10) AS50151 AS34501 Receptacle, Cable Connecting (Was M83723/19/20) AS50151 AS34501 Receptacle, Box Mtg (Was M83723/21/22) AS50151 AS34501 Receptacle, Jam Nut AS50151 AS34501 Plug, Straight (Was M83723/52/53) AS50151 AS34501 Plug, Straight, Self-Locking (Was M83723/17/18) AS81703 3 Receptacle, Push Pull AS81703 3 Receptacle, Push Pull, Jam Nut AS81703 3 Receptacle, Push Pull, Hermetic AS81703 3 Plug, Push Pull AS81703 3 Plug, Push Pull, Lanyard AS81703 3 Receptacle, Push Pull, Hermetic, Jam Nut MIL-DTL-26482 2 Receptacle, Narrow Flange Mtg (Was M83723/1/2) MIL-DTL-26482 2 Receptacle, Cable Connecting (Was M83723/7/8) MIL-DTL-26482 2 Receptacle, Wide Flange Mtg (Was M83723/3/4)) MIL-DTL-26482 2 Receptacle, Solder Mtg, Hermetic MIL-DTL-26482 2 Receptacle, Rear Mtg, Jam Nut (Was M83723/5/6) MIL-DTL-26482 2 Plug, RFI Shielded (Was M83723/42/43) MIL-DTL-26482 2 Plug, Straight, (Was M83723/13/14) MIL-DTL-26482 2 Receptacle, Hermetic, Box Mtg MIL-DTL-26482 2 Receptacle, Hermetic, Rear Mtg, Jam Nut MIL-DTL-22992 R Receptacle, Wall Mtg MIL-DTL-22992 R Plug, Straight MIL-DTL-22992 R Plug, Cable Connecting MIL-DTL-22992 R Receptacle, Box Mtg MIL-DTL-22992 R Receptacle, Jam Nut MIL-DTL-22992 R Receptacle, Jam Nut, Box Mtg MIL-DTL-22992 R Dummy Receptacle MIL-DTL-27599 Receptacle, Wall Mtg, Solder MIL-DTL-27599 Receptacle, Line MIL-DTL-27599 Plug, Straight MIL-DTL-27599 Receptacle, Jam Nut Mtg ** Connector does not accommodate rear accessories. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com A-13 E-Mail: sales@glenair.com A INDEX AND INTRODUCTION A Military Standard Connector Index and Reference Guide Part No. Connector Designator MS20030 MS20031 MS20032 MS20034 MS20035 MS24264 MS24265 MS24266 MS25183 MS27034 MS27334 MS27335 MS27336 MS27337 MS27338 MS27339 MS27340 MS27341 MS27466 MS27467 MS27468 MS27469 MS27470 MS27471 MS27472 MS27473 MS27474 MS27475 MS27476 MS27477 MS27478 MS27479 MS27480 MS27481 MS27482 MS27483 MS27484P MS27484T MS27496 MS27497 MS27498 MS27499 MS27500 MS27503 MS27504 M81511/23 M81511/24 * Consult Factory (c) 2013 Glenair, Inc. * ** ** * * E E E ** ** * ** * * * ** ** ** F F F ** ** ** F F F F ** ** ** F F F F ** ** F ** F F ** F ** ** J ** Specification Series Description MIL-DTL-27599 Receptacle, Box Mtg, Hermetic MIL-DTL-27599 Receptacle, Jam Nut, Hermetic MIL-DTL-27599 Receptacle, Solder Mtg, Hermetic MIL-DTL-27599 Receptacle, Wall Mtg MIL-DTL-27599 Receptacle, Box Mtg MIL-DTL-26500 F, G & R Receptacle, Flange Mtg MIL-DTL-26500 F, G & R Receptacle, Single Hole Mtg MIL-DTL-26500 F, G & R Plug, Straight AS50151 AMS31001 Plug, Potting Seal MIL-DTL-26500 Receptacle, Hermetic, Solder Mtg MIL-DTL-27599 Receptacle, Wall Mtg MIL-DTL-27599 Receptacle, Box Mtg MIL-DTL-27599 Plug, Straight MIL-DTL-27599 Receptacle, Jam Nut MIL-DTL-27599 Receptacle, Wall Mtg, Hermetic MIL-DTL-27599 Receptacle, Box Mtg, Hermetic MIL-DTL-27599 Receptacle, Jam Nut Mtg, Hermetic MIL-DTL-27599 Receptacle, Solder Mtg, Hermetic MIL-DTL-38999 I Receptacle, Wall Mtg MIL-DTL-38999 I Plug, Straight MIL-DTL-38999 I Receptacle, Jam Nut MIL-DTL-38999 I Receptacle, Wall Mtg, Hermetic MIL-DTL-38999 I Receptacle, Jam Nut, Hermetic MIL-DTL-38999 I Receptacle, Solder Mtg, Hermetic MIL-DTL-38999 II Receptacle, Wall Mtg MIL-DTL-38999 II Plug, Straight MIL-DTL-38999 II Receptacle, Jam Nut MIL-DTL-38999 II Receptacle, Wall Mtg MIL-DTL-38999 II Receptacle, Box Mtg, Hermetic MIL-DTL-38999 II Receptacle, Jam Nut, Hermetic MIL-DTL-38999 II Receptacle, Solder Mtg, Hermetic MIL-DTL-38999 II Inactive Use MS27472 MIL-DTL-38999 II Inactive Use MS27473 MIL-DTL-38999 II Inactive Use MS27474 MIL-DTL-38999 II Inactive Use MS27475 MIL-DTL-38999 II Inactive Use MS27477 MIL-DTL-38999 II Plug, Straight MIL-DTL-38999 II Plug, Straight MIL-DTL-38999 I Receptacle, Box Mtg MIL-DTL-38999 II Receptacle, Back Panel Wall Mtg MIL-DTL-38999 I Plug, 90 MIL-DTL-38999 II Receptacle, Box Mtg MIL-DTL-38999 II Inactive See MS27473 MIL-DTL-38999 II Inactive See MS27478 MIL-DTL-38999 II Inactive See MS27499 AS81511 1 Receptacle, Jam Nut AS-81511 1 Receptacle, Jam Nut ** Connector does not accommodate rear accessories. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com A-14 E-Mail: sales@glenair.com INDEX AND INTRODUCTION Military Standard Connector Index and Reference Guide Part No. Connector Designator MS27505 MS27508 MS27513 MS27515 MS27613 MS27614 MS27615 MS27652 MS27653 MS27654 MS27656 MS27661 MS27662 MS27664 MS27665 MS27667 MS90555 MS90556 MS90557 MS90558 M28840/10 M28840/11 M28840/12 M28840/14 M28840/16 D38999/20 D38999/21 D38999/23 D38999/24 D38999/25 D38999/26 D38999/27 D38999/29 D38999/30 D38999/40 D38999/42 D38999/44 D38999/46 D38999/47 M81511/1 M81511/2 M81511/3 M81511/4 M81511/5 M81511/6 M81511/21 M81511/22 * Consult Factory (c) 2013 Glenair, Inc. Specification Series Description A ** MIL-DTL-38999 I Receptacle, Back Panel Box Mtg ** MIL-DTL-38999 II Receptacle, Back Panel Box Mtg ** MIL-DTL-38999 II Receptacle, Box Mtg F MIL-DTL-38999 I Inactive Use MS27656 E-710 MIL-DTL-26500K Receptacle, Panel Mtg E-710 MIL-DTL-26500K Receptacle, D-Hole Mtg E-710 MIL-DTL-26500K Plug, Straight F MIL-DTL-38999 I Inactive Use MS27466 F MIL-DTL-38999 I Inactive Use MS27467 F MIL-DTL-38999 I Inactive Use MS27656 F MIL-DTL-38999 I Receptacle, Back Panel, Wall Mtg F-752 MIL-DTL-38999 I Plug, Lanyard Release ** MIL-DTL-38999 I Receptacle, Thru-Bulkhead ** MIL-DTL-38999 II Receptacle, Back-Panel Wall Mtg F MIL-DTL-38999 I Plug, Rack & Panel Mtg ** MIL-DTL-38999 II Receptacle, Thru-Bulkhead * MIL-DTL-22992 L Receptacle, Wall Mtg * MIL-DTL-22992 L Plug, Straight * MIL-DTL-22992 L Plug, Cable Connecting * MIL-DTL-22992 L Receptacle, W/Coupling Ring, Wall Mtg G MIL-DTL-28840 Receptacle, Wall Mtg G MIL-DTL-28840 Receptacle, Cable Connecting ** MIL-DTL-28840 Receptacle, Box Mtg G MIL-DTL-28840 Receptacle, Jam Nut G MIL-DTL-28840 Plug, Straight H MIL-DTL-38999 III Receptacle, Wall Mtg ** MIL-DTL-38999 III Receptacle, Hermetic ** MIL-DTL-38999 III Receptacle, Hermetic, Jam Nut H MIL-DTL-38999 III Receptacle, Jam Nut ** MIL-DTL-38999 III Receptacle, Hermetic, Solder Mtg H MIL-DTL-38999 III Plug, Straight ** MIL-DTL-38999 III Receptacle, Hermetic, Weld Mtg * MIL-DTL-38999 III Plug, Lanyard Release H-701 MIL-DTL-38999 III Plug, Lanyard Release H MIL-DTL-38999 IV Receptacle, Wall Mtg H MIL-DTL-38999 IV Receptacle, Box Mtg H-715 MIL-DTL-38999 IV Receptacle, Jam Nut H MIL-DTL-38999 IV Plug, Straight, EMI H MIL-DTL-38999 IV Plug, Straight J AS81511 2 Receptacle, Flange Mtg ** AS81511 2 Receptacle, Solder Flange J AS81511 2 Receptacle, Jam Nut ** AS81511 2 Receptacle, Jam Nut J AS81511 2 Plug, Cable Connecting J AS81511 2 Plug J AS81511 1 Receptacle, Flange Mtg ** AS81511 1 Receptacle, Solder Flange Mtg ** Connector does not accommodate rear accessories. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com A-15 E-Mail: sales@glenair.com INDEX AND INTRODUCTION A Military Standard Connector Index and Reference Guide Part No. Connector Designator M81511/23 M81511/24 M81511/25 M81511/26 M81511/27 M81511/28 M81511/31 M81511/32 M81511/33 M81511/34 M81511/35 M81511/36 M81511/37 M81511/38 M81511/41 M81511/42 M81511/44 M81511/45 M81511/46 M81511/47 M81511/48 M81511/49 M81511/50 M81511/51 M81511/52 M81511/53 M81511/54 M81511/55 M81511/56 M81511/57 M81582/1 M81582/2 M83723/1 M83723/2 M83723/3 M83723/4 M83723/5 M83723/6 M83723/7 M83723/8 M83723/9 M83723/10 M83723/11 M83723/12 M83723/13 M83723/14 M83723/17 * Consult Factory (c) 2013 Glenair, Inc. J ** J J ** ** J J J J J J J J J ** ** J J ** ** J ** J ** J ** J J ** * * A A A A A A A A ** ** ** ** A A K Specification Series Description AS81511 1 Receptacle, Jam Nut AS81511 1 Receptacle, Jam Nut AS81511 1 Receptacle, Cable Connecting AS81511 1 Plug AS81511 1 Receptacle Thru-Bulkhead, Jam Nut AS81511 2 Receptacle, Thru-Bulkhead, Single Hole Mtg AS81511 2 Receptacle, Flange Mtg AS81511 2 Receptacle, Jam Nut Mtg AS81511 2 Recepacle,Cable Connecting AS81511 2 Plug AS81511 1 Receptacle, Flange Mtg AS81511 1 Receptacle, Jam Nut AS81511 1 Receptacle, Cable Connecting AS81511 1 Plug AS81511 3 Receptacle, Flange Mtg AS81511 3 Receptacle, Solder Flange Mtg AS81511 3 Receptacle, Jam Nut AS81511 3 Receptacle, Cable Connecting AS81511 3 Plug AS81511 3 Receptacle, Solder Flange Mtg AS81511 3 Receptacle, Jam Nut AS81511 3 Receptacle, Jam Nut AS81511 4 Receptacle, Jam Nut AS81511 4 Receptacle, Flange Mtg AS81511 4 Receptacle, Solder Flange Mtg AS81511 4 Receptacle, Jam Nut AS81511 4 Receptacle, Jam Nut AS81511 4 Receptacle, Cable Connecting AS81511 4 Plug AS81511 4 Receptacle, Solder Flange Mtg MIL-C-81582 Receptacle, Single Hole Mtg MIL-C-81582 Plug, Lanyard Release MIL-DTL-83723 I Superseded by MS3470 MIL-DTL-83723 I Superseded by MS3470 MIL-DTL-83723 I Superseded by MS3472 MIL-DTL-83723 I Superseded by MS3472 MIL-DTL-83723 I Superseded by MS3474 MIL-DTL-83723 I Superseded by MS3474 MIL-DTL-83723 I Superseded by MS3471 MIL-DTL-83723 I Superseded by MS3471 MIL-DTL-83723 I Superseded by MS3440 MIL-DTL-83723 I Superseded by MS3442 MIL-DTL-83723 I Superseded by MS3443 MIL-DTL-83723 I Superseded by MS3443 MIL-DTL-83723 I Superseded by MS3476 MIL-DTL-83723 I Superseded by MS3476 MIL-DTL-83723 II Superseded by MS3451 ** Connector does not accommodate rear accessories. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com A-16 E-Mail: sales@glenair.com INDEX AND INTRODUCTION Military Standard Connector Index and Reference Guide Part No. Connector Designator MS27505 MS27508 MS27513 MS27515 MS27613 MS27614 MS27615 MS27652 MS27653 MS27654 MS27656 MS27661 MS27662 MS27664 MS27665 MS27667 MS90555 MS90556 MS90557 MS90558 M28840/10 M28840/11 M28840/12 M28840/14 M28840/16 D38999/20 D38999/21 D38999/23 D38999/24 D38999/25 D38999/26 D38999/27 D38999/29 D38999/30 D38999/40 D38999/42 D38999/44 D38999/46 D38999/47 M81511/1 M81511/2 M81511/3 M81511/4 M81511/5 M81511/6 M81511/21 M81511/22 * Consult Factory (c) 2013 Glenair, Inc. Specification Series Description A ** MIL-DTL-38999 I Receptacle, Back Panel Box Mtg ** MIL-DTL-38999 II Receptacle, Back Panel Box Mtg ** MIL-DTL-38999 II Receptacle, Box Mtg F MIL-DTL-38999 I Inactive Use MS27656 E-710 MIL-DTL-26500K Receptacle, Panel Mtg E-710 MIL-DTL-26500K Receptacle, D-Hole Mtg E-710 MIL-DTL-26500K Plug, Straight F MIL-DTL-38999 I Inactive Use MS27466 F MIL-DTL-38999 I Inactive Use MS27467 F MIL-DTL-38999 I Inactive Use MS27656 F MIL-DTL-38999 I Receptacle, Back Panel, Wall Mtg F-752 MIL-DTL-38999 I Plug, Lanyard Release ** MIL-DTL-38999 I Receptacle, Thru-Bulkhead ** MIL-DTL-38999 II Receptacle, Back-Panel Wall Mtg F MIL-DTL-38999 I Plug, Rack & Panel Mtg ** MIL-DTL-38999 II Receptacle, Thru-Bulkhead * MIL-DTL-22992 L Receptacle, Wall Mtg * MIL-DTL-22992 L Plug, Straight * MIL-DTL-22992 L Plug, Cable Connecting * MIL-DTL-22992 L Receptacle, W/Coupling Ring, Wall Mtg G MIL-DTL-28840 Receptacle, Wall Mtg G MIL-DTL-28840 Receptacle, Cable Connecting ** MIL-DTL-28840 Receptacle, Box Mtg G MIL-DTL-28840 Receptacle, Jam Nut G MIL-DTL-28840 Plug, Straight H MIL-DTL-38999 III Receptacle, Wall Mtg ** MIL-DTL-38999 III Receptacle, Hermetic ** MIL-DTL-38999 III Receptacle, Hermetic, Jam Nut H MIL-DTL-38999 III Receptacle, Jam Nut ** MIL-DTL-38999 III Receptacle, Hermetic, Solder Mtg H MIL-DTL-38999 III Plug, Straight ** MIL-DTL-38999 III Receptacle, Hermetic, Weld Mtg * MIL-DTL-38999 III Plug, Lanyard Release H-701 MIL-DTL-38999 III Plug, Lanyard Release H MIL-DTL-38999 IV Receptacle, Wall Mtg H MIL-DTL-38999 IV Receptacle, Box Mtg H-715 MIL-DTL-38999 IV Receptacle, Jam Nut H MIL-DTL-38999 IV Plug, Straight, EMI H MIL-DTL-38999 IV Plug, Straight J AS81511 2 Receptacle, Flange Mtg ** AS81511 2 Receptacle, Solder Flange J AS81511 2 Receptacle, Jam Nut ** AS81511 2 Receptacle, Jam Nut J AS81511 2 Plug, Cable Connecting J AS81511 2 Plug J AS81511 1 Receptacle, Flange Mtg ** AS81511 1 Receptacle, Solder Flange Mtg ** Connector does not accommodate rear accessories. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com A-17 E-Mail: sales@glenair.com INDEX AND INTRODUCTION A Military Standard Connector Index and Reference Guide Part No. Connector Designator Specification Series Description M83723/94 M83723/95 M83723/96 M83723/97 M83723/98 NATC00 NATC06 NATC07 NATC09 NATC77 NATC99 NBO NBOH NB3H NB4 NB5H NB6 NB6G NB7 NB7H NB8H NLSO NLS3H NLS6 NLS6G NLS7 NLS7H NZGL00 NZGL03 NZGL06 NZGL07 NZGL09 NZGL66 NZGL77 NZGL99 ** A A A A H* H* H* *** *** *** A ** ** A ** A A A ** ** F ** F F F ** H** *** H** H** *** H** *** *** MIL-DTL-83723 MIL-DTL-83723 MIL-DTL-83723 MIL-DTL-83723 MIL-DTL-83723 SSQ221635 SSQ221635 SSQ221635 SSQ221635 SSQ221635 SSQ221635 40M39569 40M39569 40M39569 40M39569 40M39569 40M39569 40M39569 40M39569 40M39569 40M39569 40M38277 40M38277 40M38277 40M38277 40M38277 40M38277 SSQ21635 SSQ21635 SSQ21635 SSQ21635 SSQ21635 SSQ21635 SSQ21635 SSQ21635 III III III III III Receptacle, Bayonet, Single Hole Mtg., Hermetic Plug, Threaded, Socket Contact, Self-Locking Plug, Threaded, Pin Contact, Self-Locking Plug, Threaded, RFI, Socket Contact, Self-Locking Plug, Threaded, Pin Contact, Self-Locking Receptacle, Flange Plug Receptacle, Jam Nut Receptacle, Weld Mtg. Receptacle, Jam Nut Receptacle, Weld Mtg. Receptacle, Flange Mtg. Receptacle, Hermetic Receptacle, Hermetic Receptacle, Flange Mtg. Through-Bulkhead, Hermetic Plug, Straight Plug, Straight, EMI Receptacle, Jam Nut Receptacle, Hermetic Receptacle, Hermetic Receptacle, Flange Mtg. Receptacle, Hermetic Plug, Straight Plug, Straight, EMI Receptacle, Jam Nut Receptacle, Jam Nut Receptacle, Flange Receptacle, Lever Plug Receptacle, Weld Mtg Receptacle, Weld Mtg Plug Receptacle, Jam Nut Receptacle, Weld Mtg * Consult Factory ** Connector does not accommodate rear accessories. H* NATC Series size 09 through 25 mates to Glenair connector designator H. Consult factory for sizes 33 and 37. H** NZGL Series requires special accessories manufactured by Glenair. Consult factory. *** Connector noted does not have accessory thread (NZGL and NATC hermetic/control leakage classes). (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com A-18 E-Mail: sales@glenair.com Part No. AS85049/1 AS85049/2 AS85049/3 AS85049/4 AS85049/5 AS85049/6 AS85049/7 AS85049/8 AS85049/9 AS85049/10 AS85049/11 AS85049/14 AS85049/15 Description Straight Strain Relief Straight Environmental Strain Relief Straight Environmental Backshell Straight Step-Up Environmental Backshell Straight Step-Down Environmental Backshell 45 RFI/EMI Environmental Backshell 45 Environmental Backshell 90 RFI/EMI Environmental Backshell 90 Environmental Backshell Straight RFI/EMI Environmental Backshell Straight Environmental Backshell E Nuts 45 Qwik-Ty(R) Strain Reliefs AS85049/16 AS85049/17 AS85049/18 AS85049/19 AS85049/20 AS85049/21 AS85049/23 AS85049/24 AS85049/25 AS85049/26 AS85049/27 AS85049/28 AS85049/29 AS85049/30 AS85049/31 AS85049/33 AS85049/34 AS85049/36 AS85049/37 AS85049/38 AS85049/39 AS85049/41 AS85049/42 AS85049/43 AS85049/44 AS85049/45 AS85049/46 AS85049/47 AS85049/48 AS85049/49 AS85049/50 AS85049/51 AS85049/52 90 Qwik-Ty(R) Strain Reliefs Straight RFI/EMI Environmental Backshell Straight RFI/EMI Environmental Backshell Straight Environmental Backshell Straight Crimp Ring Backshell and Crimp Ring Straight Non-Environmental Strain Relief 45 RFI-EMI Non-Environmental Backshell 90 RFI-EMI Non-Environmental Backshell Straight RFI-EMI Non-Environmental Backshell Adapter / Crimp Ring E Nuts Strt. Rectangular Non-Environmental Backshell Straight Non-Environmental Strain Relief Straight RFI-EMI Shield Termination Backshell E Nuts Straight Crimp Ring Non-Env. Backshell Straight Adapter and Extender Straight RFI-EMI Non-Environmental Backshell 90 RFI-EMI Non-Environmental Backshell Straight Strain Reliefs 90 Strain Reliefs Straight Strain Relief Straight Strain Relief 45 Strain Relief Straight Rectangular Strain Relief Backshell Straight Strain Relief 90 Non-Self-Locking Composite Strain Relief 90 Strain Reliefs Rectangular Strain Relief Backshell Straight Strain Relief Rectangular Strain Relief Backshell 90 Strain Reliefs Straight Strain Reliefs (c) 2013 Glenair, Inc. Page No. B-2 B-3 B-4-6 B-7-11 B-13-17 B-19 B-21 B-23 B-25 B-27 B-31 B-35 AS85049 AS85049 Qualified Backshells and Connector Accessories Page No. Part No. Description AS85049/53 /54 /55 Qwik-Ty(R) Strain Reliefs AS85049/56 /57 AS85049/58 AS85049/59 AS85049/60 AS85049/61 AS85049/62 AS85049/63 AS85049/69 AS85049/74 AS85049/75 AS85049/76 AS85049/77 AS85049/78 AS85049/79 AS85049/80 AS85049/81 AS85049/82 /83 /84 AS85049/85 /86 /87 AS85049/88 /89 /90 AS85049/91 /92 AS85049/93 AS85049/94 AS85049/95 AS85049/96 AS85049/103 AS85049/104 AS85049/105 AS85049/109 AS85049/111 AS85049/112 AS85049/114 AS85049/115 AS85049/118 AS85049/120 AS85049/121 AS85049/123 AS85049/124 AS85049/126 AS85049/127 AS85049/128-3, -4 AS85049/130 AS85049/139 AS85049/140 AS85049/141 AS85049/142 B-36 B-36 B-37 B-38 B-39 B-41 B-42 B-43 B-45 B-47 B-51-52 B-53 B-54 B-55 B-56 B-57 B-58 B-59 B-60 B-61 B-62 B-63 B-64 B-65 B-66 B-67 B-68 B-69 B-70 B-71-73 B-74 B-75 B-76 B-77 Qwik-Ty(R) Strain Reliefs Potting Boot Ring Straight Shrink Boot Adapter Straight Shrink Boot Adapters Potting Boot Ring Straight Shrink Boot Adapter 90 Qwik-Ty(R) Strain Relief Straight Shrink Boot Adapter Potting Boot Potting Boot 90 EMI/RFI Environmental Backshell 45 EMI/RFI Environmental Backshell 45 EMI/RFI Environmental Backshell 90 EMI/RFI Environmental Backshell Sealing Plug, Sizes 8, 12 and 16 Sealing Plug Banding Backshells Banding Backshells Banding Backshells Strain Reliefs Banding Split Ring Full Perimeter Mounting Flange 3/4 Perimeter Mounting Flange 1/4 Perimeter Mounting Flange Straight Shield Sock Composite Adapter 45 Shield Sock Composite Adapter 90 Shield Sock Composite Adapter Straight Shield Sock Shrink Boot Adapter 90 Shield Sock Sock Shrink Boot Adapter Straight Shield Sock Sock Shrink Boot Adapter 90 Shield Sock Shrink Boot Adapter Straight Shield Sock Shrink Boot Adapter Straight Strain Relief 90 Strain Relief Straight Strain Relief 90 Strain Relief Sraight Strain Relief 90 Strain Relief Bushing Strip Clamping Bands Gasket Telescoping Bushing, C or L Straight Lipped Heat Shrink Boots 90 Lipped Heat Shrink Boots Wide Body Heat Shrink Boot Transitions Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 B-78 B-79 B-80 B-81 B-82-83 B-84 B-85 B-86 B-87 B-88 B-89 B-90 B-91 B-92 B-93 B-94 B-96 B-97 B-99 B-101 B-103 B-104 B-105 B-106 B-107 B-108 B-110 B-112 B-114 B-116 B-118 B-120 B-122 B-124 B-126 B-128 B-130 B-132 B-134 B-136 B-137 B-138 B-140 B-142-148 B-150-154 B-156-160 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-1 E-Mail: sales@glenair.com B AS85049 AS85049/1 and MS3057B Strain Reliefs Basic Part Number Dash No. Superseded Part Number MS3057-16B M85049/1 - 12B Basic Part No. Dash No. B H F E Thread G TABLE I: Shell Size, Cable Entry and Backshell Dimensions Dash No. 3B 4B 6B 8B 10B 12B 16B 20B 24B 28B 32B 40B Conn. Shell Ref.(s) 8S, 10S 10SL, 12S, 12 14S, 14 16S, 16 18 20, 22 24, 28 32 36 40 44 48 E Thread Class 2B 1/2 - 28 UNEF 5/8 - 24 UNEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1 - 20 UNEF 1 3/16 - 18 UNEF 1 7/16 - 18 UNEF 1 3/4 - 18 UNS 2 - 18 UNS 2 1/4 - 16 UN 2 1/2 - 16 UN 3 - 16 UN F Max 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.094 (27.8) 1.219 (31.0) 1.219 (31.0) 1.344 (34.1) 1.547 (39.3) 1.547 (39.3) 1.734 (44.0) 1.781 (45.2) OG Max .812 (20.6) .937 (23.8) 1.062 (27.0) 1.188 (30.2) 1.312 (33.3) 1.562 (39.7) 1.750 (44.5) 2.250 (57.2) 2.375 (60.3) 2.625 (66.7) 2.812 (71.4) 3.312 (84.1) H Min .231 .315 .440 .515 .614 .738 .926 1.200 1.363 1.611 1.865 2.365 (5.9) (8.0) (11.2) (13.1) (15.6) (18.7) (23.5) (30.5) (34.6) (40.9) (47.4) (60.1) APPLICATION NOTES 1. Finish on M85049/1 is Cadmium Olive Drab over Electroless Nickel (1,000 hour salt spray. 2. Assembly to be identified with manufacturer's name and part number, space permitting. 3. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 4. For complete dimensions, see the applicable Military Specification. 5. Metric dimensions (mm) are in parentheses. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-2 E-Mail: sales@glenair.com Basic Part Number AS85049 AS85049/2 and MS3057C Strain Reliefs Superseded Part Number Dash No. MS3057-16C M85049/2 - 12C Basic Part No. Dash No. B Clamping Bars F E Thread Cable Entry H (See Note 3) G TABLE I: Shell Size, Cable Entry and Backshell Dimensions Dash No. 3C 4C 6C 8C 10C 12C 16C 20C 24C 28C 32C Conn. Shell Ref.(s) 8S, 10S 10SL, 12S, 12 14S, 14 16S, 16 18 20, 22 24, 28 32 36 40 44 E Thread Class 2B 1/2 - 28 UNEF 5/8 - 24 UNEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1 - 20 UNEF 1 3/16 - 18 UNEF 1 7/16 - 18 UNEF 1 3/4 - 18 UNS 2 - 18 UNS 2 1/4 - 16 UN 2 1/2 - 16 UN F Max 1.375 (34.9) 1.375 (34.9) 1.375 (34.9) 1.375 (34.9) 1.437 (36.5) 1.437 (36.5) 1.562 (39.7) 1.812 (46.0) 2.062 (52.4) 2.062 (52.4) (55.6) 2.188 OG Max .812 (20.6) .937 (23.8) 1.062 (27.0) 1.188 (30.2) 1.312 (33.3) 1.562 (39.7) 1.750 (44.5) 2.250 (57.2) 2.375 (60.3) 2.625 (66.7) 2.812 (71.4) H Max Closed .217 (5.5) .296 (7.5) .390 (9.9) .434 (11.0) .434 (11.0) .596 (15.1) .596 (15.1) .858 (21.8) .858 (21.8) 1.107 (28.1) 1.421 (36.1) Cable Entry Max .219 (5.6) .312 (7.9) .438 (11.1) .531 (13.5) .625 (15.9) .750 (19.1) .938 (23.8) 1.250 (31.8) 1.375 (34.9) 1.625 (41.3) 1.875 (47.6) APPLICATION NOTES 1. Finish on M85049/2 is Cadmium Olive Drab over Electroless Nickel, 1,000 hour salt spray. 2. Assembly to be identified with manufacturer's name and part number, space permitting. 3. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 4. For complete dimensions, see the applicable Military Specification. 5. Metric dimensions (mm) are in parentheses. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-3 E-Mail: sales@glenair.com AS85049 AS85049/3 Style 1 Straight Environmental Backshell CONNECTOR DESIGNATOR: C A = Black Anodize W = Cadmium, Olive Drab Y = Pure Dense Electrodeposited Aluminum MIL-DTL-22992 Classes C, J and R TABLE II: Cable Range B Dash No. Shell Size 1 12 2 3 M85049/3 Cable Range Min Max .281 (7.1) .375 (9.5) 12 .188 (4.8) .281 (7.1) 14 .344 (8.7) .438 (11.1) 4 16 .511 (13.0) .605 (15.4) 5 16 .436 (11.1) .530 (13.5) 6 16 .311 (7.9) .405 (10.3) 7 18 .531 (13.5) .625 (15.9) 8 18 .605 (15.4) .699 (17.8) 9 18 .406 (10.3) .500 (12.7) 10 18 .361 (9.2) .455 (11.6) 11 20 .715 (18.2) .828 (21.0) 12 20 .449 (11.4) .562 (14.3) 13 22 .637 (16.2) .750 (19.1) 14 22 .787 (20.0) .900 (22.9) 15 22 .692 (17.6) .805 (20.4) 16 24 .930 (23.6) 1.055 (26.8) 17 24 .675 (17.1) 1.000 (25.4) 18 24 .984 (25.0) 1.109 (28.2) 19 24 .755 (19.2) .880 (22.4) 20 28 1.055 (26.8) 1.180 (30.0) 21 28 1.105 (28.1) 1.230 (31.2) 22 28 1.185 (30.1) 1.310 (33.3) 23 32 1.320 (33.5) 1.455 (37.0) 24 32 1.406 (35.7) 1.531 (38.9) 25 32 1.250 (31.8) 1.375 (34.9) 26 36 1.531 (38.9) 1.656 (42.1) 27 36 1.437 (36.5) 1.562 (39.7) 28 44 2.105 (53.5) 2.250 (57.2) 29 44 2.025 (51.4) 2.170 (55.1) Basic Part Number 1. 2. 3. 4. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Approximate chain lengths: Dash No. 01-12 = 5.0 (127.0); Dash No. 13-29 = 6.0 (152.4). (c) 2013 Glenair, Inc. W 10 A 1 Type A or B Dash Number (Table II) Style 1 TABLE I : Shell Size and Dimensions Shell Size APPLICATION NOTES Finish X = Nickel Fluorocarbon Polymer Z = Zinc Nickel A Thread Class 2B-LH B Dia .015 (0.4) E Max G Dia Max H Max J Thread (Plated) Class 2 (A or B) 12 .7500 - 20 UNEF 14 .8750 - 20 UNEF 1.057 (26.8) 3.678 (93.4) 1.219 (31.0) .765 (19.4) 1.000-0.1P-0.2L-DS .933 (23.7) 3.365 (85.5) 1.094 (27.8) .765 (19.4) 0.875-0.1P-0.2L-DS 16 1.0000 - 20 UNEF 1.183 (30.0) 4.177 (106.1) 1.344 (34.1) .980 (24.9) 1.125-0.1P-0.2L-DS 18 1.1250 - 18 UNEF 1.307 (33.2) 4.489 (114.0) 1.469 (37.3) .980 (24.9) 1.250-0.1P-0.2L-DS 20 1.2500 - 18 UNEF 1.433 (36.4) 4.615 (117.2) 1.562 (39.7) .980 (24.9) 1.375-0.1P-0.2L-DS 22 1.3750 - 18 UNEF 1.557 (39.5) 4.647 (118.0) 1.608 (40.8) .980 (24.9) 1.500-0.1P-0.2L-DS 24 1.6250 - 18 UNEF 1.807 (45.9) 4.896 (124.4) 1.938 (49.2) .980 (24.9) 1.750-0.1P-0.2L-DS 28 1.8750 - 16 UN 2.057 (52.2) 4.959 (126.0) 2.219 (56.4) .980 (24.9) 2.000-0.1P-0.2L-DS 32 2.0625 - 16 UNS 2.307 (58.6) 5.021 (127.5) 2.469 (62.7) .980 (24.9) 2.250-0.1P-0.2L-DS 36 2.3125 - 16 UNS 2.557 (64.9) 5.083 (129.1) 2.719 (69.1) .980 (24.9) 2.500-0.1P-0.2L-DS 44 2.8750 - 16 UN 3.120 (79.2) 6.471 (164.4) 2.969 (75.4) .980 (24.9) 3.000-0.1P-0.2L-DS Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-4 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: C AS85049 AS85049/3 Style 2 Straight Environmental Backshell A = Black Anodize W = Cadmium, Olive Drab Y = Pure Dense Electrodeposited Aluminum MIL-DTL-22992 Classes C, J and R M85049/3 Finish X = Nickel Fluorocarbon Polymer Z = Zinc Nickel W Basic Part Number 10 Dash Number (Table II) A Type A or B 2 Style 2 TABLE II: Dash No. and Cable Range Dash No. Shell Size Cable Range Min Max 1 12 .246 (6.2) .396 (10.1) 2 14 .321 (8.2) .521 (13.2) 3 16 .446 (11.3) .646 (16.4) 4 18 .565 (14.4) .765 (19.4) 5 20 .690 (17.5) .890 (22.6) 6 22 .815 (20.7) 1.015 (25.8) 7 24 .980 (24.9) 1.180 (30.0) 8 28 1.230 (31.2) 1.430 (36.3) 9 28 1.030 (26.2) 1.230 (31.2) 10 32 1.430 (36.3) 1.670 (42.4) 11 36 1.660 (42.2) 1.860 (47.2) 12 40 1.860 (47.2) 2.110 (53.6) TABLE I: Shell Size and Dimensions Shell Size A Thread Class 2B-LH B Dia .015 (0.4) E Max G Dia Max H Max J Thread (Plated) Class 2 (A or B) 12 .7500 - 20 UNEF 14 .8750 - 20 UNEF 1.057 (26.8) 4.100 (104.1) 1.219 (31.0) .765 (19.4) 1.000-0.1P-0.2L-DS 16 1.0000 - 20 UNEF 1.183 (30.0) 4.400 (111.8) 1.344 (34.1) .980 (24.9) 1.125-0.1P-0.2L-DS 18 1.1250 - 18 UNEF 1.307 (33.2) 4.900 (124.5) 1.469 (37.3) .980 (24.9) 1.250-0.1P-0.2L-DS 20 1.2500 - 18 UNEF 1.433 (36.4) 4.900 (124.5) 1.562 (39.7) .980 (24.9) 1.375-0.1P-0.2L-DS 22 1.3750 - 18 UNEF 1.557 (39.5) 4.900 (124.5) 1.688 (42.9) .980 (24.9) 1.500-0.1P-0.2L-DS 24 1.6250 - 18 UNEF 1.807 (45.9) 5.000 (127.0) 1.938 (49.2) .980 (24.9) 1.750-0.1P-0.2L-DS .933 (23.7) 4.000 (101.6) 1.094 (27.8) .765 (19.4) 0.875-0.1P-0.2L-DS 28 1.8750 - 16 UN 2.057 (52.2) 5.300 (134.6) 2.219 (56.4) .980 (24.9) 2.000-0.1P-0.2L-DS 32 2.0625 - 16 UNS 2.307 (58.6) 5.600 (142.2) 2.469 (62.7) .980 (24.9) 2.250-0.1P-0.2L-DS 36 2.3125 - 16 UNS 2.557 (64.9) 5.600 (142.2) 2.719 (69.1) .980 (24.9) 2.500-0.1P-0.2L-DS 40 2.6250 - 16 UN 2.870 (72.9) 5.725 (145.4) 2.969 (75.4) .980 (24.9) 2.750-0.1P-0.2L-DS (c) 2013 Glenair, Inc. APPLICATION NOTES 1. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Approximate chain lengths: Dash No. 01-12 = 5.0 (127.0); Dash No. 13-29 = 6.0 (152.4). 2. 3. 4. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-5 E-Mail: sales@glenair.com B AS85049 AS85049/3 Style 3 Straight Environmental Backshell CONNECTOR DESIGNATOR: C A = Black Anodize W = Cadmium, Olive Drab Y = Pure Dense Electrodeposited Aluminum MIL-DTL-22992 Classes C, J and R TABLE II: Dash Number and Cable Range B Dash No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Shell Size 12 12 14 16 16 16 18 18 18 20 20 22 22 24 24 24 28 28 28 32 32 32 36 36 44 44 Cable Range Min Max .281 (7.1) .219 (5.6) .400 (10.2) .511 (13.0) .436 (11.1) .316 (8.0) .605 (15.4) .560 (14.2) .361 (9.2) .715 (18.2) .449 (11.4) .787 (20.0) .637 (16.2) .984 (25.0) .875 (22.2) .755 (19.2) 1.185 (30.1) 1.105 (28.1) 1.055 (26.8) 1.406 (35.7) 1.320 (33.5) 1.250 (31.8) 1.531 (38.9) 1.437 (36.5) 2.105 (53.5) 2.025 (51.4) .377 (9.6) .281 (7.1) .438 (11.1) .605 (15.4) .530 (13.5) .405 (10.3) .699 (17.8) .625 (15.9) .455 (11.6) .828 (21.0) .562 (14.3) .900 (22.9) .750 (19.1) 1.109 (28.2) 1.000 (25.4) .880 (22.4) 1.310 (33.3) 1.230 (31.2) 1.180 (30.0) 1.531 (38.9) 1.455 (37.0) 1.375 (34.9) 1.656 (42.1) 1.562 (39.7) 2.250 (57.2) 2.170 (55.1) M85049/3 F Appr. Free Length 3.344 (84.9) 1.062 (27.0) 4.344 (110.3) 5.188 (131.8) 4.688 (119.1) 3.688 (93.7) 6.188 (157.2) 6.188 (157.2) 4.188 (106.4) 6.688 (169.9) 5.188 (131.8) 7.188 (182.6) 6.688 (169.9) 7.688 (195.3) 7.188 (182.6) 6.688 (169.9) 8.688 (220.7) 8.188 (208.0) 8.188 (208.0) 10.688 (271.5) 9.688 (246.1) 9.688 (246.1) 12.688 (322.3) 11.188 (284.2) 17.188 (436.6) 17.188 (436.6) Basic Part Number Finish X = Nickel Fluorocarbon Polymer Z = Zinc Nickel W 10 Dash Number (Table II) A Type A or B 3 Style 3 TABLE I: Shell Size and Dimensions Shell Size A Thread Class 2B-LH B Dia .015 (0.4) E Max G Dia Max H Max J Thread (Plated) Class 2 (A or B) 12 .7500 - 20 UNEF 14 .8750 - 20 UNEF 1.057 (26.8) 3.248 (82.5) 1.219 (31.0) .765 (19.4) 1.000-0.1P-0.2L-DS .933 (23.7) 2.935 (74.5) 1.094 (27.8) .765 (19.4) 0.875-0.1P-0.2L-DS 16 1.0000 - 20 UNEF 1.183 (30.0) 3.712 (94.3) 1.344 (34.1) .980 (24.9) 1.125-0.1P-0.2L-DS 18 1.1250 - 18 UNEF 1.307 (33.2) 4.024 (102.2) 1.469 (37.3) .980 (24.9) 1.250-0.1P-0.2L-DS 20 1.2500 - 18 UNEF 1.433 (36.4) 4.115 (104.5) 1.562 (39.7) .980 (24.9) 1.375-0.1P-0.2L-DS 22 1.3750 - 18 UNEF 1.557 (39.5) 4.150 (105.4) 1.688 (42.9) .980 (24.9) 1.500-0.1P-0.2L-DS 24 1.6250 - 18 UNEF 1.807 (45.9) 4.212 (107.0) 1.938 (49.2) .980 (24.9) 1.750-0.1P-0.2L-DS 28 1.8750 - 16 UN 2.057 (52.2) 4.275 (108.6) 2.219 (56.4) .980 (24.9) 2.000-0.1P-0.2L-DS 32 2.0625 - 16 UNS 2.307 (58.6) 4.337 (110.2) 2.469 (62.7) .980 (24.9) 2.250-0.1P-0.2L-DS 36 2.3125 - 16 UNS 2.557 (64.9) 4.399 (111.7) 2.719 (69.1) .980 (24.9) 2.500-0.1P-0.2L-DS 44 2.8750 - 16 UN 3.120 (72.9) 5.799 (147.3) 3.217 (81.7) .980 (24.9) 3.000-0.1P-0.2L-DS (c) 2013 Glenair, Inc. APPLICATION NOTES 1. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Approximate chain lengths: Dash No. 01-12 = 5.0 (127.0); Dash No. 13-29 = 6.0 (152.4). 2. 3. 4. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-6 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: C MIL-DTL-22992 Classes C, J and R AS85049 AS85049/4 Style 1 Straight Environmental Backshell A = Black Anodize W = Cadmium, Olive Drab Y = Pure Dense Electrodeposited Aluminum M85049/4 Basic Part Number Finish X = Nickel Fluorocarbon Polymer Z = Zinc Nickel W 10 Dash Number (Table II) A Type A or B 1 Style 1 APPLICATION NOTES 1. 2. 3. 4. (c) 2013 Glenair, Inc. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Approximate chain lengths: Dash No. 01-12 = 5.0 (127.0); Dash No. 13-29 = 6.0 (152.4). Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-7 E-Mail: sales@glenair.com B AS85049 AS85049/4 Style 1 Straight Environmental Backshell TABLE I: Shell Size and Dimensions B Shell Size A Thread Class 2B-LH B Dia .015 (0.4) G Dia Max H Max J Thread (Plated) Class 2 (A or B) 12 .7500 - 20 UNEF 14 .8750 - 20 UNEF 1.057 (26.8) 1.219 (31.0) .765 (19.4) 1.000-0.1P-0.2L-DS 18 1.1250 - 18 UNEF 1.307 (33.2) 1.469 (37.3) .980 (24.9) 1.250-0.1P-0.2L-DS 20 1.2500 - 18 UNEF 1.433 (36.4) 1.562 (39.7) .980 (24.9) 1.375-0.1P-0.2L-DS 22 1.3750 - 18 UNEF 1.557 (39.5) 1.688 (42.9) .980 (24.9) 1.500-0.1P-0.2L-DS 24 1.6250 - 18 UNEF 1.807 (45.9) 1.938 (49.2) .980 (24.9) 1.750-0.1P-0.2L-DS .933 (23.7) 1.094 (27.8) .765 (19.4) 0.875-0.1P-0.2L-DS 28 1.8750 - 16 UN 2.057 (52.2) 2.219 (56.4) .980 (24.9) 2.000-0.1P-0.2L-DS 32 2.0625 - 16 UNS 2.307 (58.6) 2.469 (62.7) .980 (24.9) 2.250-0.1P-0.2L-DS 36 2.3125 - 16 UNS 2.557 (64.9) 2.719 (69.1) .980 (24.9) 2.500-0.1P-0.2L-DS 40 2.6250 - 16 UN 44 2.8750 - 16 UN 3.120 (79.2) 3.217 (81.7) .980 (24.9) 3.000-0.1P-0.2L-DS 2.870(72.9) 2.969(75.4) .980 (24.9) 2.750-0.1P-0.2L-DS TABLE II: Dash Number and Cable Range Dash No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 (c) 2013 Glenair, Inc. Shell Size 12 12 12 14 14 14 14 18 20 20 20 20 22 22 24 24 24 24 28 28 28 32 32 32 32 36 36 36 36 36 40 40 40 40 44 E Max 4.275 (108.6) 3.678 (93.4) 4.275 (108.6) 4.177 (106.1) 4.489 (114.0) 4.177 (106.1) 4.177 (106.1) 4.584 (116.4) 4.647 (118.0) 4.896 (124.4) 4.647 (118.0) 4.896 (124.4) 4.896 (124.4) 4.896 (124.4) 4.959 (126.0) 4.959 (126.0) 4.959 (126.0) 4.959 (126.0) 5.021 (127.5) 5.021 (127.5) 5.021 (127.5) 5.083 (129.1) 5.385 (136.8) 5.083 (129.1) 5.385 (136.8) 5.354 (136.0) 5.354 (136.0) 5.354 (136.0) 5.354 (136.0) 5.385 (136.8) 5.682 (144.3) 5.682 (144.3) 5.620 (142.7) 5.620 (142.7) 6.471 (164.4) F .031 (0.8) 1.375 (34.9) 1.125 (28.6) 1.375 (34.9) 1.375 (34.9) 1.562 (39.7) 1.375 (34.9) 1.375 (34.9) 1.688 (42.9) 1.812 (46.0) 2.125 (54.0) 1.812 (46.0) 2.125 (54.0) 2.125 (54.0) 2.125 (54.0) 2.469 (62.7) 2.469 (62.7) 2.469 (62.7) 2.625 (66.7) 2.625 (66.7) 2.625 (66.7) 2.625 (66.7) 2.953 (75.0) 3.171 (80.5) 2.953 (75.0) 3.171 (80.5) 3.171 (80.5) 3.171 (80.5) 3.171 (80.5) 3.171 (80.5) 3.375 (85.7) 3.625 (92.1) 3.500 (88.9) 3.375 (85.7) 3.375 (85.7) 3.531 (89.7) Cable Range Min Max .436 (11.1) .406 (10.3) .311 (7.9) .511 (13.0) .531 (13.5) .436 (11.1) .311 (7.9) .715 (18.2) .637 (16.2) .875 (22.2) .787 (20.0) .930 (23.6) .875 (22.2) .984 (25.0) 1.055 (26.8) 1.185 (30.1) 1.105 (28.1) 1.250 (31.8) 1.320 (33.5) 1.406 (35.7) 1.250 (31.8) 1.531 (38.9) 1.700 (43.2) 1.437 (36.5) 1.605 (40.8) 1.775 (45.1) 1.605 (40.8) 1.700 (43.2) 1.859 (47.2) 1.917 (48.7) 2.230 (56.6) 2.105 (53.5) 2.000 (50.8) 1.917 (48.7) 2.183 (55.4) .530 (13.5) .500 (12.7) .405 (10.3) .605 (15.4) .625 (15.9) .530 (13.5) .405 (10.3) .828 (21.0) .750 (19.1) 1.000 (25.4) .900 (22.9) 1.055 (26.8) 1.000 (25.4) 1.109 (28.2) 1.180 (30.0) 1.310 (33.3) 1.230 (31.2) 1.375 (34.9) 1.445 (36.7) 1.531 (38.9) 1.375 (34.9) 1.656 (42.1) 1.828 (46.4) 1.562 (39.7) 1.730 (43.9) 1.900 (48.3) 1.730 (43.9) 1.825 (46.4) 1.984 (50.4) 2.062 (52.4) 2.375 (60.3) 2.250 (57.2) 2.145 (54.5) 2.062 (52.4) 2.328 (59.1) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-8 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: C MIL-DTL-22992 Classes C, J and R A = Black Anodize W = Cadmium, Olive Drab Y = Pure Dense Electrodeposited Aluminum M85049/4 Basic Part Number (c) 2013 Glenair, Inc. AS85049 AS85049/4 Style 2 Straight Environmental Backshell Finish X = Nickel Fluorocarbon Polymer Z = Zinc Nickel W 10 Dash Number (Table II) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 A Type A or B 2 Style 2 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-9 E-Mail: sales@glenair.com B AS85049 AS85049/4 Style 2 Straight Environmental Backshell TABLE I: Shell Size and Dimensions B Shell Size A Thread Class 2B-LH B Dia .015 (0.4) E Max G Dia Max H Max J Thread (Plated) Class 2 (A or B) 12 .7500 - 20 UNEF 14 .8750 - 20 UNEF 1.057 (26.8) 4.100 (104.1) 1.219 (31.0) .765 (19.4) 1.000-0.1P-0.2L-DS 16 1.0000 - 20 UNEF 1.183 (30.0) 4.400 (111.8) 1.344 (34.1) .980 (24.9) 1.125-0.1P-0.2L-DS 18 1.1250 - 18 UNEF 1.307 (33.2) 4.900 (124.5) 1.469 (37.3) .980 (24.9) 1.250-0.1P-0.2L-DS .933 (23.7) 4.000 (101.6) 1.094 (27.8) .765 (19.4) 0.875-0.1P-0.2L-DS 20 1.2500 - 18 UNEF 1.433 (36.4) 4.900 (124.5) 1.562 (39.7) .980 (24.9) 1.375-0.1P-0.2L-DS 22 1.3750 - 18 UNEF 1.557 (39.5) 4.900 (124.5) 1.688 (42.9) .980 (24.9) 1.500-0.1P-0.2L-DS 24 1.6250 - 18 UNEF 1.807 (45.9) 5.000 (127.0) 1.938 (49.2) .980 (24.9) 1.750-0.1P-0.2L-DS 28 1.8750 - 16 UN 2.057 (52.2) 5.300 (134.6) 2.219 (56.4) .980 (24.9) 2.000-0.1P-0.2L-DS 32 2.0625 - 16 UNS 2.307 (58.6) 5.600 (142.2) 2.469 (62.7) .980 (24.9) 2.250-0.1P-0.2L-DS 36 2.3125 - 16 UNS 2.557 (64.9) 5.600 (142.2) 2.719 (69.1) .980 (24.9) 2.500-0.1P-0.2L-DS 40 2.6250 - 16 UN 2.870 (72.9) 5.725 (145.4) 2.969 (75.4) .980 (24.9) 2.750-0.1P-0.2L-DS TABLE II: Dash No. and Cable Range Dash No. Shell Size F .005 (0.1) Cable Range Min Max 1 12 1.219 (31.0) .321 (8.2) .521 (13.2) 2 14 1.344 (34.1) .446 (11.3) .646 (16.4) 3 16 1.469 (37.3) .565 (14.4) .765 (19.4) 4 18 1.625 (41.3) .690 (17.5) .890 (22.6) 5 20 1.750 (44.5) .815 (20.7) 1.015 (25.8) 6 22 2.000 (50.8) .980 (24.9) 1.180 (30.0) 7 24 2.250 (57.2) 1.230 (31.2) 1.430 (36.3) 8 24 2.250 (57.2) 1.030 (26.2) 1.230 (31.2) 9 28 2.500 (63.5) 1.430 (36.3) 1.670 (42.4) 10 32 2.750 (69.9) 1.660 (42.2) 1.860 (47.2) 11 36 3.062 (77.8) 1.860 (47.2) 2.110 (53.6) 12 40 3.437 (87.3) 2.200 (55.9) 2.400 (61.0) 13 40 3.437 (87.3) 2.200 (55.9) 2.200 (55.9) APPLICATION NOTES 1. 2. 3. 4. (c) 2013 Glenair, Inc. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Approximate chain lengths: Dash No. 01-12 = 5.0 (127.0); Dash No. 13-29 = 6.0 (152.4). Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-10 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: C AS85049 AS85049/4 Style 3 Straight Environmental Backshell A = Black Anodize W = Cadmium, Olive Drab Y = Pure Dense Electrodeposited Aluminum MIL-DTL-22992 Classes C, J and R M85049/4 Basic Part Number Finish X = Nickel Fluorocarbon Polymer Z = Zinc Nickel W 10 Dash Number (Table II) A Type A or B 3 Style 3 APPLICATION NOTES 1. 2. 3. 4. (c) 2013 Glenair, Inc. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Approximate chain lengths: Dash No. 01-12 = 5.0 (127.0); Dash No. 13-29 = 6.0 (152.4). Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-11 E-Mail: sales@glenair.com B AS85049 AS85049/4 Style 3 Straight Environmental Backshell TABLE I: Shell Size and Dimensions Shell Size B A Thread Class 2B-LH B Dia .015 (0.4) G Dia Max H Max J Thread (Plated) Class 2 (A or B) 12 .7500 - 20 UNEF 14 .8750 - 20 UNEF 1.057 (26.8) 1.219 (31.0) .765 (19.4) 1.000-0.1P-0.2L-DS 18 1.1250 - 18 UNEF 1.307 (33.2) 1.469 (37.3) .980 (24.9) 1.250-0.1P-0.2L-DS 20 1.2500 - 18 UNEF 1.433 (36.4) 1.562 (39.7) .980 (24.9) 1.375-0.1P-0.2L-DS 22 1.3750 - 18 UNEF 1.557 (39.5) 1.688 (42.9) .980 (24.9) 1.500-0.1P-0.2L-DS 24 1.6250 - 18 UNEF 1.807 (45.9) 1.938 (49.2) .980 (24.9) 1.750-0.1P-0.2L-DS .933 (23.7) 1.094 (27.8) .765 (19.4) 0.875-0.1P-0.2L-DS 28 1.8750 - 16 UN 2.057 (52.2) 2.219 (56.4) .980 (24.9) 2.000-0.1P-0.2L-DS 32 2.0625 - 16 UNS 2.307 (58.6) 2.469 (62.7) .980 (24.9) 2.250-0.1P-0.2L-DS 36 2.3125 - 16 UNS 2.557 (64.9) 2.719 (69.1) .980 (24.9) 2.500-0.1P-0.2L-DS 40 2.6250 - 16 UN 2.870 (72.9) 2.969 (75.4) .980 (24.9) 3.000-0.1P-0.2L-DS TABLE II: Dash Number and Cable Range Dash Shell No. Size 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 (c) 2013 Glenair, Inc. 12 12 12 14 14 14 14 18 20 20 20 20 22 22 24 24 24 24 28 28 28 32 32 32 36 36 36 36 36 40 40 40 40 E Max F Appr. Free Length 3.810 (96.8) 3.248 (82.5) 3.810 (96.8) 4.024 (102.2) 3.712 (94.3) 3.712 (94.3) 3.712 (94.3) 4.087 (103.8) 4.212 (107.0) 4.212 (107.0) 4.150 (105.4) 4.150 (105.4) 4.212 (107.0) 4.212 (107.0) 4.275 (108.6) 4.275 (108.6) 4.275 (108.6) 4.275 (108.6) 4.337 (110.2) 4.337 (110.2) 4.337 (110.2) 4.704 (119.5) 4.704 (119.5) 4.399 (111.7) 4.704 (119.5) 4.673 (118.7) 4.673 (118.7) 4.673 (118.7) 4.673 (118.7) 5.000 (127.0) 5.000 (127.0) 4.939 (125.5) 4.939 (125.5) 4.688 (119.1) 4.344 (110.3) 3.688 (93.7) 6.188 (157.2) 5.188 (131.8) 4.688 (119.1) 3.688 (93.7) 6.688 (169.9) 7.688 (195.3) 7.188 (182.6) 7.188 (182.6) 7.188 (182.6) 7.688 (195.3) 7.188 (182.6) 9.688 (246.1) 8.688 (220.7) 8.188 (208.0) 8.188 (208.0) 10.688 (271.5) 9.688 (246.1) 9.688 (246.1) 13.688 (347.7) 13.688 (347.7) 12.688 (322.3) 14.188 (360.4) 13.688 (347.7) 13.688 (347.7) 13.688 (347.7) 13.688 (347.7) 18.188 (462.0) 17.188 (436.6) 14.188 (360.4) 14.188 (360.4) Cable Range Min Max 436 (11.1) .406 (10.3) .316 (8.0) .560 (14.2) .511 (13.0) .430 (10.9) .316 (8.0) .715 (18.2) .930 (23.6) .875 (22.2) .787 (20.0) .637 (16.2) .984 (25.0) .875 (22.2) 1.250 (31.8) 1.185 (30.1) 1.105 (28.1) 1.055 (26.8) 1.406 (35.7) 1.320 (33.5) 1.250 (31.8) 1.700 (43.2) 1.605 (40.8) 1.531 (38.9) 1.917 (48.7) 1.859 (47.2) 1.775 (45.1) 1.700 (43.2) 1.605 (40.8) 2.230 (56.6) 2.105 (53.5) 2.000 (50.8) 1.917 (48.7) .530 (13.5) .500 (12.7) .405 (10.3) .625 (15.9) .605 (15.4) .530 (13.5) .405 (10.3) .828 (21.0) 1.055 (26.8) 1.000 (25.4) .900 (22.9) .750 (19.1) 1.109 (28.2) 1.000 (25.4) 1.375 (34.9) 1.310 (33.3) 1.230 (31.2) 1.180 (30.0) 1.531 (38.9) 1.445 (36.7) 1.375 (34.9) 1.825 (46.4) 1.730 (43.9) 1.656 (42.1) 2.062 (52.4) 1.984 (50.4) 1.900 (48.3) 1.825 (46.4) 1.730 (43.9) 2.375 (60.3) 2.250 (57.2) 2.145 (54.5) 2.062 (52.4) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-12 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: C MIL-DTL-22992 Classes C, J and R AS85049 AS85049/5 Style 1 Straight Environmental Backshell A = Black Anodize W = Cadmium, Olive Drab Y = Pure Dense Electrodeposited Aluminum M85049/5 Basic Part Number Finish X = Nickel Fluorocarbon Polymer Z = Zinc Nickel W 10 Dash Number (Table II) A Type A or B 1 Style 1 APPLICATION NOTES 1. 2. 3. 4. (c) 2013 Glenair, Inc. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Approximate chain lengths: Dash No. 01-12 = 5.0 (127.0); Dash No. 13-29 = 6.0 (152.4). Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-13 E-Mail: sales@glenair.com B AS85049 AS85049/5 Style 1 Straight Environmental Backshell TABLE I: Shell Size and Dimensions Shell Size 12 B A Thread Class 2B-LH B Dia .015 (0.4) .7500 - 20 UNEF G Dia Max H Max J Thread (Plated) Class 2 (A or B) .933 (23.7) 1.094 (27.8) .765 (19.4) 0.875-0.1P-0.2L-DS 18 1.1250 - 18 UNEF 1.307 (33.2) 1.469 (37.3) .980 (24.9) 1.250-0.1P-0.2L-DS 20 1.2500 - 18 UNEF 1.433 (36.4) 1.562 (39.7) .980 (24.9) 1.375-0.1P-0.2L-DS 22 1.3750 - 18 UNEF 1.557 (39.5) 1.688 (42.9) .980 (24.9) 1.500-0.1P-0.2L-DS 24 1.6250 - 18 UNEF 1.807 (45.9) 1.938 (49.2) .980 (24.9) 1.750-0.1P-0.2L-DS 28 1.8750 - 16 UN 2.057 (52.2) 2.219 (56.4) .980 (24.9) 2.000-0.1P-0.2L-DS 32 2.0625 - 16 UNS 2.307 (58.6) 2.469 (62.7) .980 (24.9) 2.250-0.1P-0.2L-DS 36 2.3125 - 16 UNS 2.557 (64.9) 2.719 (69.1) .980 (24.9) 2.500-0.1P-0.2L-DS 40 2.6250 - 16 UN 2.870 (72.9) 2.969 (75.4) .980 (24.9) 2.750-0.1P-0.2L-DS 44 2.8750 - 16 UN 3.120 (79.2) 3.217 (81.7) .980 (24.9) 3.000-0.1P-0.2L-DS TABLE II: Dash Number and Cable Range Dash Shell No. Si ze 1 12 2 18 3 18 4 18 5 18 6 18 7 20 8 20 9 20 10 22 11 22 12 22 13 24 14 24 15 24 16 24 17 24 18 24 19 28 20 28 21 28 22 28 23 28 24 28 25 28 26 28 27 32 28 32 29 32 30 32 31 32 32 32 33 32 34 32 35 32 36 36 37 36 38 36 39 36 40 36 41 36 42 36 43 40 44 40 45 40 46 40 47 44 48 44 (c) 2013 Glenair, Inc. E Max 3.182 3.901 3.932 3.901 4.177 4.177 4.489 4.489 4.306 4.584 4.306 4.306 4.647 4.647 4.647 4.647 4.542 4.647 4.896 4.896 4.647 4.229 4.647 4.896 4.431 4.647 4.896 4.959 4.647 4.896 4.896 4.647 4.276 4.431 4.959 4.959 4.896 5.021 4.959 5.021 4.651 4.959 6.354 6.354 6.354 6.057 6.345 5.266 (80.8) (99.1) (99.9) (99.1) (106.1) (106.1) (114.0) (114.0) (109.4) (116.4) (109.4) (109.4) (118.0) (118.0) (118.0) (118.0) (115.4) (118.0) (124.4) (124.4) (118.0) (107.4) (118.0) (124.4) (112.5) (118.0) (124.4) (126.0) (118.0) (124.4) (124.4) (118.0) (108.6) (112.5) (126.0) (126.0) (124.4) (127.5) (126.0) (127.5) (118.1) (126.0) (161.4) (161.4) (161.4) (153.8) (161.2) (133.8) F .031 (0.8) .938 1.062 1.125 1.062 1.375 1.375 1.562 1.562 1.375 1.688 1.375 1.375 1.812 1.812 1.812 1.812 1.688 1.812 2.125 2.125 1.812 1.125 1.812 2.125 1.375 1.812 2.125 2.469 1.812 2.125 2.125 1.812 1.125 1.375 2.469 2.469 2.125 2.625 2.469 2.625 1.812 2.469 3.171 3.171 3.171 2.953 3.375 3.171 (23.8) (27.0) (28.6) (27.0) (34.9) (34.9) (39.7) (39.7) (34.9) (42.9) (34.9) (34.9) (46.0) (46.0) (46.0) (46.0) (42.9) (46.0) (54.0) (54.0) (46.0) (28.6) (46.0) (54.0) (34.9) (46.0) (54.0) (62.7) (46.0) (54.0) (54.0) (46.0) (28.6) (34.9) (62.7) (62.7) (54.0) (66.7) (62.7) (66.7) (46.0) (62.7) (80.5) (80.5) (80.5) (75.0) (85.7) (80.5) Cable Range Min Max .156 .281 .281 .188 .511 .436 .605 .361 .511 .449 .311 .715 .787 .517 .637 .857 .715 .692 .755 .984 .637 .281 .857 .875 .436 .567 .930 1.105 .637 .755 .984 .857 .281 .436 1.005 1.185 .984 1.250 1.055 1.320 .857 1.105 1.815 1.700 1.605 1.531 1.867 1.775 (4.0) (7.1) (7.1) (4.8) (13.0) (11.1) (15.4) (9.2) (13.0) (11.4) (7.9) (18.2) (20.0) (13.1) (16.2) (21.8) (18.2) (17.6) (19.2) (25.0) (16.2) (7.1) (21.8) (22.2) (11.1) (14.4) (23.6) (28.1) (16.2) (19.2) (25.0) (21.8) (7.1) (11.1) (25.5) (30.1) (25.0) (31.8) (26.8) (33.5) (21.8) (28.1) (46.1) (43.2) (40.8) (38.9) (47.4) (45.1) .250 (6.4) .375 (9.5) .375 (9.5) .281 (7.1) .605 (15.4) .530 (13.5) .699 (17.8) .455 (11.6) .605 (15.4) .562 (14.3) .405 (10.3) .828 (21.0) .900 (22.9) .630 (16.0) .750 (19.1) .970 (24.6) .828 (21.0) .805 (20.4) .880 (22.4) 1.109 (28.2) .750 (19.1) .375 (9.5) .970 (24.6) 1.000 (25.4) .530 (13.5) .680 (17.3) 1.055 (26.8) 1.230 (31.2) .750 (19.1) .880 (22.4) 1.109 (28.2) .970 (24.6) .375 (9.5) .530 (13.5) 1.130 (28.7) 1.310 (33.3) 1.109 (28.2) 1.375 (34.9) 1.180 (30.0) 1.445 (36.7) .970 (24.6) 1.230 (31.2) 1.940 (49.3) 1.825 (46.4) 1.730 (43.9) 1.656 (42.1) 2.000 (50.8) 1.900 (48.3) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-14 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: C MIL-DTL-22992 Classes C, J and R A = Black Anodize W = Cadmium, Olive Drab Y = Pure Dense Electrodeposited Aluminum M85049/5 Basic Part Number (c) 2013 Glenair, Inc. AS85049 AS85049/5 Style 2 Straight Environmental Backshell Finish X = Nickel Fluorocarbon Polymer Z = Zinc Nickel W 10 Dash Number (Table II) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 A Type A or B 2 Style 2 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-15 E-Mail: sales@glenair.com B AS85049 AS85049/5 Style 2 Straight Environmental Backshell TABLE I: Shell Size and Dimensions Shell Size B A Thread Class 2B-LH B Dia .015 (0.4) E Max G Dia Max H Max J Thread (Plated) Class 2 (A or B) 12 .7500 - 20 UNEF .933 (23.7) 4.000 (101.6) 1.094 (27.8) .765 (19.4) 0.875-0.1P-0.2L-DS 14 .8750 - 20 UNEF 1.057 (26.8) 4.100 (104.1) 1.219 (31.0) .765 (19.4) 1.000-0.1P-0.2L-DS 16 1.0000 - 20 UNEF 1.183 (30.0) 4.400 (111.8) 1.344 (34.1) .980 (24.9) 1.125-0.1P-0.2L-DS 18 1.1250 - 18 UNEF 1.307 (33.2) 4.600 (116.8) 1.469 (37.3) .980 (24.9) 1.250-0.1P-0.2L-DS 20 1.2500 - 18 UNEF 1.433 (36.4) 4.900 (124.5) 1.562 (39.7) .980 (24.9) 1.375-0.1P-0.2L-DS 22 1.3750 - 18 UNEF 1.557 (39.5) 4.900 (124.5) 1.688 (42.9) .980 (24.9) 1.500-0.1P-0.2L-DS 24 1.6250 - 18 UNEF 1.807 (45.9) 5.000 (127.0) 1.938 (49.2) .980 (24.9) 1.750-0.1P-0.2L-DS 28 1.8750 - 16 UN 2.057 (52.2) 5.300 (134.6) 2.219 (56.4) .980 (24.9) 2.000-0.1P-0.2L-DS 32 2.0625 - 16 UNS 2.057 (52.2) 5.600 (142.2) 2.469 (62.7) .980 (24.9) 2.250-0.1P-0.2L-DS 36 2.3125 - 16 UNS 2.557 (64.9) 5.600 (142.2) 2.719 (69.1) .980 (24.9) 2.500-0.1P-0.2L-DS 40 2.6250 - 16 UN 2.870 (72.9) 5.725 (145.4) 2.969 (75.4) .980 (24.9) 2.750-0.1P-0.2L-DS TABLE II: Dash Number and Cable Range Dash Shell No. Size 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 12 14 16 18 18 20 20 22 22 22 24 24 28 28 32 32 36 36 40 40 F .031 (0.8) .969 1.094 1.219 1.344 1.344 1.469 1.469 1.625 1.625 1.625 1.750 1.750 2.000 2.000 2.250 2.250 2.500 2.500 2.750 2.750 (24.6) (27.8) (31.0) (34.1) (34.1) (37.3) (37.3) (41.3) (41.3) (41.3) (44.5) (44.5) (50.8) (50.8) (57.2) (57.2) (63.5) (63.5) (69.9) (69.9) Cable Range Min Max .130 (3.3) .246 (6.2) .321 (8.2) .446 (11.3) .300 (7.6) .565 (14.4) .400 (10.2) .690 (17.5) .500 (12.7) .400 (10.2) .815 (20.7) .595 (15.1) .980 (24.9) .780 (19.8) 1.230 (31.2) 1.030 (26.2) 1.470 (37.3) 1.270 (32.3) 1.660 (42.2) 1.400 (35.6) .280 (7.1) .396 (10.1) .521 (13.2) .646 (16.4) .475 (12.1) .765 (19.4) .600 (15.2) .890 (22.6) .700 (17.8) .525 (13.3) 1.015 (25.8) .815 (20.7) 1.180 (30.0) .980 (24.9) 1.430 (36.3) 1.230 (31.2) 1.670 (42.4) 1.470 (37.3) 1.860 (47.2) 1.660 (42.2) APPLICATION NOTES 1. 2. 3. 4. (c) 2013 Glenair, Inc. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Approximate chain lengths: Dash No. 01-12 = 5.0 (127.0); Dash No. 13-29 = 6.0 (152.4). Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-16 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: C MIL-DTL-22992 Classes C, J and R AS85049 AS85049/5 Style 3 Straight Environmental Backshell A = Black Anodize W = Cadmium, Olive Drab Y = Pure Dense Electrodeposited Aluminum M85049/5 Basic Part Number Finish X = Nickel Fluorocarbon Polymer Z = Zinc Nickel W 10 Dash Number (Table II) A Type A or B 3 Style 3 APPLICATION NOTES 1. 2. 3. 4. (c) 2013 Glenair, Inc. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Approximate chain lengths: Dash No. 01-12 = 5.0 (127.0); Dash No. 13-29 = 6.0 (152.4). Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-17 E-Mail: sales@glenair.com B AS85049 AS85049/5 Style 3 Straight Environmental Backshell TABLE I: Shell Size and Dimensions Shell Size B A Thread Class 2B-LH B Dia .015 (0.4) G Dia Max H Max J Thread (Plated) Class 2 (A or B) 12 .7500 - 20 UNEF .933 (23.7) 1.094 (27.8) .765 (19.4) 0.875-0.1P-0.2L-DS 18 1.1250 - 18 UNEF 1.307 (33.2) 1.469 (37.3) .980 (24.9) 1.250-0.1P-0.2L-DS 20 1.2500 - 18 UNEF 1.433 (36.4) 1.562 (39.7) .980 (24.9) 1.375-0.1P-0.2L-DS 22 1.3750 - 18 UNEF 1.557 (39.5) 1.688 (42.9) .980 (24.9) 1.500-0.1P-0.2L-DS 24 1.6250 - 18 UNEF 1.807 (45.9) 1.938 (49.2) .980 (24.9) 1.750-0.1P-0.2L-DS 28 1.8750 - 16 UN 2.057 (52.2) 2.219 (56.4) .980 (24.9) 2.000-0.1P-0.2L-DS 32 2.0625 - 16 UNS 2.307 (58.6) 2.469 (62.7) .980 (24.9) 2.250-0.1P-0.2L-DS 36 2.3125 - 16 UNS 2.557 (64.9) 2.719 (69.1) .980 (24.9) 2.500-0.1P-0.2L-DS 40 2.6250 - 16 UN 2.875 (73.0) 2.969 (75.4) .980 (24.9) 2.750-0.1P-0.2L-DS 44 2.8750 - 16 UN 3.125 (79.4) 3.217 (81.7) .980 (24.9) 3.000-0.1P-0.2L-DS TABLE II: Dash Number, Shell Size and Cable Range Dash Shell No. Size 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 (c) 2013 Glenair, Inc. 12 18 18 18 18 20 20 20 22 22 22 24 24 24 28 28 28 28 28 28 28 32 32 32 32 32 32 32 32 36 36 36 36 36 36 36 40 40 40 40 44 44 Cable Range Min Max .160 .511 .436 .306 .219 .605 .511 .361 .715 .449 .316 .692 .637 .517 .984 .875 .755 .637 .567 .436 .306 1.105 1.005 .930 .857 .755 .637 .436 .306 1.320 1.250 1.185 1.105 1.055 .984 .857 1.815 1.700 1.605 1.531 1.862 1.775 (4.1) (13.0) (11.1) (7.8) (5.6) (15.4) (13.0) (9.2) (18.2) (11.4) (8.0) (17.6) (16.2) (13.1) (25.0) (22.2) (19.2) (16.2) (14.4) (11.1) (7.8) (28.1) (25.5) (23.6) (21.8) (19.2) (16.2) (11.1) (7.8) (33.5) (31.8) (30.1) (28.1) (26.8) (25.0) (21.8) (46.1) (43.2) (40.8) (38.9) (47.3) (45.1) .222 .605 .530 .375 .281 .699 .605 .455 .828 .562 .405 .805 .750 .630 1.109 1.000 .880 .750 .680 .530 .375 1.230 1.130 1.055 .970 .880 .750 .530 .375 1.445 1.375 1.310 1.230 1.180 1.109 .970 1.940 1.825 1.730 1.656 2.000 1.900 (5.6) (15.4) (13.5) (9.5) (7.1) (17.8) (15.4) (11.6) (21.0) (14.3) (10.3) (20.4) (19.1) (16.0) (28.2) (25.4) (22.4) (19.1) (17.3) (13.5) (9.5) (31.2) (28.7) (26.8) (24.6) (22.4) (19.1) (13.5) (9.5) (36.7) (34.9) (33.3) (31.2) (30.0) (28.2) (24.6) (49.3) (46.4) (43.9) (42.1) (50.8) (48.3) E Max 2.752 3.712 3.712 3.502 3.471 4.024 3.841 4.024 4.087 4.087 3.841 4.150 4.150 4.150 4.212 4.212 4.212 4.150 4.150 3.966 3.799 4.275 4.275 4.212 4.150 4.212 4.150 3.966 3.846 4.337 4.337 4.275 4.275 4.275 4.212 4.154 5.673 5.673 5.673 5.373 5.673 4.594 (69.9) (94.3) (94.3) (89.0) (88.2) (102.2) (97.6) (102.2) (103.8) (103.8) (97.6) (105.4) (105.4) (105.4) (107.0) (107.0) (107.0) (105.4) (105.4) (100.7) (96.5) (108.6) (108.6) (107.0) (105.4) (107.0) (105.4) (100.7) (97.7) (110.2) (110.2) (108.6) (108.6) (108.6) (107.0) (105.5) (144.1) (144.1) (144.1) (136.5) (144.1) (116.7) F Appr. Free Length 2.406 5.188 4.688 3.844 2.844 6.188 5.188 4.188 6.688 5.188 3.688 6.688 6.688 5.688 7.688 7.188 6.688 6.688 6.688 4.688 3.844 8.188 7.188 7.688 7.188 6.688 6.688 4.688 3.844 9.688 9.688 8.688 8.188 8.188 7.688 7.188 13.188 13.188 13.188 12.688 14.188 12.688 (61.1) (131.8) (119.1) (97.6) (72.2) (157.2) (131.8) (106.4) (169.9) (131.8) (93.7) (169.9) (169.9) (144.5) (195.3) (182.6) (169.9) (169.9) (169.9) (119.1) (97.6) (208.0) (182.6) (195.3) (182.6) (169.9) (169.9) (119.1) (97.6) (246.1) (246.1) (220.7) (208.0) (208.0) (195.3) (182.6) (335.0) (335.0) (335.0) (322.3) (360.4) (322.3) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-18 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: A AS50151 Series 34001 MIL-DTL-26482 Series II AS81703 Series III MIL-DTL-83723 Series I & III 40M39569, DEF 5326-3, EN 2997 EN 3646, ESC 10, ESC 11, LN 29504 NFC93422 Series HE302 PAN 6432-1, PAN 6432-2, PATT 602 Basic Part Number AS85049 AS85049/6 and MS3189A 45 EMI/RFI Environmental Backshell Superseded Part Number Dash Number (Table II) MS3189A 21 C M85049/6 - 21 W Basic Part No. Finish / Material B = Black Cadmium / Stainless Steel N = Electroless Nickel / Aluminum S = Passivated / Stainless Steel W = 1,000 Hr. Cadmium Olive Drab over Electroless Nickel / Aluminum X = Aluminum, Nickel Fluorocarbon Polymer Z = Aluminum, Zinc-Nickel, Black XS = Stainless Steel, Nickel Flurocarbon Polymer ZS = Stainless Steel, Zinc-Nickel, Black Dash No. Finish (Material is Aluminum Only) A = Cadmium Olive Drab over Nickel C = Cadmium Olive Drab N = Electroless Nickel TABLE I: Dash Number, Cable Range and Dimensions Dash No. Shell Size F Max G Max K Ref. 1 2 L Max Cable Range Min Max M85049/42 Ref. 3 .686 (17.4) 2.034 (51.7) 1.544 (39.2) .957 (24.3) .125 (3.2) .250 (6.4) 4 3 1.500 (38.1) 1.306 (33.2) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 3 8 .625 (15.9) 1.974 (50.1) 1.544 (39.2) .957 (24.3) .125 (3.2) .250 (6.4) 4 4 10 .686 (17.4) 1.369 (34.8) 1.544 (39.2) .957 (24.3) .125 (3.2) .312 (7.9) 4 5 10 .686 (17.4) 2.034 (51.7) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .375 (9.5) 6 6 12 .750 (19.1) 2.034 (51.7) 1.544 (39.2) .957 (24.3) .125 (3.2) .312 (7.9) 4 7 12 .750 (19.1) 2.034 (51.7) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 8 12 .750 (19.1) 2.124 (53.9) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .500 (12.7) 10 9 14 .813 (20.7) 1.779 (45.2) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 10 14 .813 (20.7) 2.234 (56.7) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .575 (14.6) 10 11 16 .906 (23.0) 1.874 (47.6) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 12 16 .906 (23.0) 2.424 (61.6) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .700 (17.8) 12 13 18 1.093 (27.8) 2.062 (52.4) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 14 18 1.093 (27.8) 2.424 (61.6) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .779 (19.8) 16 15 20 1.093 (27.8) 2.062 (52.4) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 16 20 1.093 (27.8) 2.574 (65.4) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .904 (23.0) 16 17 22 1.188 (30.2) 2.217 (56.3) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 18 22 1.188 (30.2) 2.574 (65.4) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.029 (26.1) 20 19 24 1.188 (30.2) 2.217 (56.3) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 20 24 1.188 (30.2) 2.624 (66.6) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.144 (29.1) 20 21 28 1.313 (33.4) 2.562 (65.1) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 APPLICATION NOTES 1. For complete dimensions see the applicable Military Specification. When maximum cable entry is exceeded, Style 2 will be supplied. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 2. 3. 4. Continued on Page B-20 (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-19 E-Mail: sales@glenair.com B AS85049 AS85049/6 and MS3189A 45 EMI/RFI Environmental Backshell TABLE I: Continued from Page B-19 Dash No. B Shell Size F Max G Max K Ref. L Max M85049/42 Ref. 22 28 1.312 (33.3) 2.280 (57.9) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 23 32 1.375 (34.9) 2.724 (69.2) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 24 32 1.375 (34.9) 2.724 (69.2) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 25 32 1.375 (34.9) 2.374 (60.3) 2.550 (64.8) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 26 36 1.406 (35.7) 2.814 (71.5) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 27 36 1.406 (35.7) 2.814 (71.5) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 28 36 1.406 (35.7) 2.468 (62.7) 2.600 (66.0) 3.020 (76.7) 1.437 (36.5) 1.840 (46.7) 32 29 40 2.156 (54.8) 2.634 (66.9) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 30 40 2.156 (54.8) 2.634 (66.9) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 31 40 2.156 (54.8) 2.468 (62.7) 2.600 (66.0) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 32 44 2.156 (54.8) 2.814 (71.5) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 33 44 2.156 (54.8) 2.468 (62.7) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 34 44 2.156 (54.8) 2.468 (62.7) 2.600 (66.0) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 35 48 2.156 (54.8) 2.814 (71.5) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 36 48 2.156 (54.8) 2.814 (71.5) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 37 48 2.156 (54.8) 2.468 (62.7) 2.600 (66.0) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 38 61 1.188 (30.2) 2.574 (65.4) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 39 61 1.188 (30.2) 2.217 (56.3) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.184 (30.1) 20 40 16 .906 (23.0) 2.234 (56.7) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 41 18 1.093 (27.8) 2.424 (61.6) 1.544 (39.2) .957 (24.3) .125 (3.2) .312 (7.9) 4 42 18 1.093 (27.8) 2.424 (61.6) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 43 20 1.093 (27.8) 2.424 (61.6) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 44 22 1.188 (30.2) 2.574 (65.4) 1.544 (39.2) .957 (24.3) .125 (3.2) .312 4 45 22 1.188 (30.2) 2.574 (65.4) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 46 24 1.188 (30.2) 2.574 (65.4) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 47 36 1.406 (35.7) 2.814 (71.5) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 48 40 2.156 (54.8) 2.814 (71.5) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 49* 10 1.500 (38.1) 2.034 (51.7) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 50* 14 1.842 (46.8) 2.424 (61.6) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 51* 16 1.937 (49.2) 2.574 (65.4) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 52 18 1.093 (27.8) 2.424 (61.6) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 53 61 1.188 (30.2) 2.574 (65.4) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 54 20 1.093 (27.8) 2.424 (61.6) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 55* 20 2.061 (52.3) 2.624 (66.6) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 56 22 1.188 (30.2) 2.574 (65.4) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 57 22 1.188 (30.2) 2.574 (65.4) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 58* 22 2.061 (52.3) 2.624 (66.6) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 59 24 1.188 (30.2) 2.574 (65.4) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 60 28 1.313 (33.4) 2.624 (66.6) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 61 28 1.313 (33.4) 2.624 (66.6) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 62 32 1.375 (34.9) 2.724 (69.2) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 63 36 1.406 (35.7) 2.814 (71.5) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 64 36 1.406 (35.7) 2.814 (71.5) 2.550 (64.8) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 65 40 2.156 (54.8) 2.814 (71.5) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 66 40 2.156 (54.8) 2.814 (71.5) 2.550 (64.8) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 67 44 2.156 (54.8) 2.814 (71.5) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 68 44 2.156 (54.8) 2.814 (71.5) 2.550 (64.8) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 69 48 2.156 (54.8) 2.814 (71.5) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 70 48 2.156 (54.8) 2.814 (71.5) 2.550 (64.8) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 71* 12 1.654 (42.0) 2.234 (56.4) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 72* 18 1.937 (49.2) 2.574 (65.4) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 73* 24 2.061 (52.3) 2.624 (66.6) 2.230 (56.6) 2.116 (53.7) .875 (22.2) 1.250 (31.8) 20 74 14 .813 (20.7) 2.124 (53.9) 1.544 (39.2) .957 (24.3) .125 (3.2) .312 (7.9) 04 75 16 .906 (23.0) 2.234 (56.4) 1.544 (39.2) .957 (24.3) .125 (3.2) .312 (7.9) 04 * Denotes Style 2 (c) 2013 Glenair, Inc. Cable Range Min Max (7.9) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-20 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: A AS50151 Series AS34001 MIL-DTL-26482 Series II AS81703 Series III MIL-DTL-83723 Series I & III 40M39569, DEF 5326-3, EN 2997 EN 3646, ESC 10, ESC 11, LN 29504 NFC93422 Series HE302 PAN 6432-1, PAN 6432-2, PATT 602 APPLICATION NOTES 1. 2. 3. 4. 5. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. When maximum cable entry is exceeded, Style 2 will be supplied. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Approximate chain lengths: Dash No. 01-12 = 5.0 (127.0); Dash No. 13-29 = 6.0 (152.4). Basic Part Number AS85049 AS85049/7 and MS3189B 45 Environmental Backshell Superseded Part Number Dash Number (Table II) MS3189B 21 N M85049/7 - 21 N Basic Part No. Finish / Material B = Black Cadmium / Stainless Steel N = Electroless Nickel / Aluminum S = Passivated / Stainless Steel W = 1,000 Hr. Cadmium Olive Drab over Electroless Nickel / Aluminum X = Nickel Fluorocarbon Polymer / Aluminum Y = Pure Dense Electrodeposited Aluminum / Aluminum Z = Zinc Nickel, Black / Aluminum XS = Nickel Fluorocarbon Polymer / Stainless Steel YS = Pure Dense Electrodeposited Aluminum / Stainless Steel ZS = Zinc Nickel, Black / Stainless Steel Dash No. Finish (Material is Aluminum Only) A = Cadmium Olive Drab over Nickel C = Cadmium Olive Drab N = Electroless Nickel TABLE II: Dash Number and Cable Range Dash No. Shell Size F Max G .125 (3.2) K Ref. L Max Cable Range Min Max M85049/42 Ref. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 03 03 08 10 10 12 12 12 14 14 16 16 18 18 20 20 22 22 24 24 28 .688 (17.5) 1.500 (38.1) .625 (15.9) .688 (17.5) .688 (17.5) .750 (19.1) .750 (19.1) .750 (19.1) .812 (20.6) .812 (20.6) .906 (23.0) .906 (23.0) 1.093 (27.8) 1.093 (27.8) 1.093 (27.8) 1.093 (27.8) 1.188 (30.2) 1.188 (30.2) 1.188 (30.2) 1.188 (30.2) 1.312 (33.3) 1.852 (47.0) 1.972 (50.1) 1.244 (31.6) 1.912 (48.6) 1.307 (33.2) 1.972 (50.1) 1.972 (50.1) 1.972 (50.1) 2.062 (52.4) 1.717 (43.6) 2.172 (55.2) 1.812 (46.0) 2.362 (60.0) 2.000 (50.8) 2.362 (60.0) 2.000 (50.8) 2.512 (63.8) 2.155 (54.7) 2.512 (63.8) 2.093 (53.2) 2.500 (63.5) 1.027 (26.1) 1.027 (26.1) 1.027 (26.1) 1.027 (26.1) 1.027 (26.1) 1.027 (26.1) 1.027 (26.1) 1.027 (26.1) 1.027 (26.1) 1.027 (26.1) 1.027 (26.1) 1.059 (26.9) 1.027 (26.1) 1.156 (29.4) 1.027 (26.1) 1.156 (29.4) 1.059 (26.9) 1.375 (34.9) 1.059 (26.9) 1.375 (34.9) 1.156 (33.7) .957 (24.3) 1.145 (29.1) .957 (24.3) .957 (24.3) 1.145 (29.1) .957 (24.3) 1.145 (29.1) 1.332 (33.8) 1.145 (29.1) 1.332 (33.8) 1.145 (29.1) 1.551 (39.4) 1.332 (33.8) 1.770 (45.0) 1.332 (33.8) 1.770 (45.0) 1.551 (39.4) 2.113 (53.7) 1.551 (39.4) 2.113 (53.7) 1.770 (45.0) .125 (3.2) .250 (6.4) .250 (6.4) .437 (11.1) .125 (3.2) .250 (6.4) .125 (3.2) .312 (7.9) .250 (6.4) .375 (9.5) .125 (3.2) .312 (7.9) .250 (6.4) .437 (11.1) .350 (8.9) .500 (12.7) .250 (6.4) .437 (11.1) .350 (8.9) .575 (14.6) .250 (6.4) .437 (11.1) .500 (12.7) .700 (17.8) .350 (8.9) .625 (15.9) .625 (15.9) .779 (19.8) .350 (8.9) .625 (15.9) .625 (15.9) .904 (23.0) .500 (12.7) .750 (19.1) .875 (22.2) 1.029 (26.1) .500 (12.7) .750 (19.1) .875 (22.2) 1.144 (29.1) .625 (15.9) .937 (23.8) 4 6 4 4 6 4 6 10 6 10 6 12 10 16 10 16 12 20 12 20 16 Table Continued on Page B-22 (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-21 E-Mail: sales@glenair.com B AS85049 AS85049/7 and MS3189B 45 Environmental Backshell TABLE II: Dash Number and Cable Range (Continued From Page B-21) Dash No. B Shell Size F Max G .125 (3.2) K Ref. 1.312 (33.3) 1.375 (34.9) 1.375 (34.9) 1.375 (34.9) 1.406 (35.7) 1.406 (35.7) 1.406 (35.7) 2.156 (54.8) 2.156 (54.8) 2.156 (54.8) 2.156 (54.8) 2.156 (54.8) 2.156 (54.8) 2.156 (54.8) 2.156 (54.8) 2.156 (54.8) 1.188 (30.2) 1.188 (30.2) .906 (23.0) 1.093 (27.8) 1.093 (27.8) 1.093 (27.8) 1.188 (30.2) 1.188 (30.2) 1.188 (30.2) 1.406 (35.7) 2.156 (54.8) 1.500 (38.1) 1.842 (46.8) 1.938 (49.2) 1.093 (27.8) 1.188 (30.2) 1.093 (27.8) 2.061 (52.3) 1.188 (30.2) 1.188 (30.2) 2.061 (52.3) 1.188 (30.2) 1.312 (33.3) 1.312 (33.3) 1.375 (34.9) 1.406 (35.7) 1.406 (35.7) 2.156 (54.8) 2.156 (54.8) 2.156 (54.8) 2.156 (54.8) 2.156 (54.8) 2.156 (54.8) 1.654 (42.0) 1.938 (49.2) 2.061 (52.3) .812 (20.6) .906 (23.0) 2.218 (56.3) 2.662 (67.6) 2.662 (67.6) 2.312 (58.7) 2.752 (69.9) 2.752 (69.9) 2.406 (61.1) 2.752 (69.9) 2.752 (69.9) 2.406 (61.1) 2.752 (69.9) 2.752 (69.9) 2.406 (61.1) 2.752 (69.9) 2.752 (69.9) 2.406 (61.1) 2.512 (63.8) 2.155 (54.7) 2.172 (55.2) 2.362 (60.0) 2.362 (60.0) 2.362 (60.0) 2.512 (63.8) 2.512 (63.8) 2.512 (63.8) 2.752 (69.9) 2.752 (69.9) 1.972 (50.1) 2.362 (60.0) 2.512 (63.8) 2.362 (60.0) 2.512 (63.8) 2.362 (60.0) 2.562 (65.1) 2.512 (63.8) 2.512 (63.8) 2.562 (65.1) 2.512 (63.8) 2.562 (65.1) 2.562 (65.1) 2.662 (67.6) 2.752 (69.9) 2.752 (69.9) 2.752 (69.9) 2.752 (69.9) 2.752 (69.9) 2.752 (69.9) 2.752 (69.9) 2.752 (69.9) 2.173 (55.2) 2.512 (63.8) 2.562 (65.1) 2.062 (52.4) 2.172 (55.2) 1.500 (38.1) 1.156 (29.4) 1.375 (34.9) 1.781 (45.2) 1.156 (29.4) 1.500 (38.1) 1.830 (46.5) 1.156 (29.4) 1.500 (38.1) 1.830 (46.5) 1.156 (29.4) 1.500 (38.1) 1.830 (46.5) 1.156 (29.4) 1.500 (38.1) 1.830 (46.5) 1.059 (26.9) 1.375 (34.9) 1.027 (26.1) 1.027 (26.1) 1.027 (26.1) 1.027 (26.1) 1.027 (26.1) 1.027 (26.1) 1.027 (26.1) 1.059 (26.9) 1.059 (26.9) 1.027 (26.1) 1.059 (26.9) 1.156 (29.4) 1.059 (26.9) 1.156 (29.4) 1.059 (26.9) 1.375 (34.9) 1.027 (26.1) 1.156 (29.4) 1.375 (34.9) 1.156 (29.4) 1.059 (26.9) 1.375 (34.9) 1.500 (38.1) 1.375 (34.9) 1.781 (45.2) 1.375 (34.9) 1.781 (45.2) 1.375 (34.9) 1.781 (45.2) 1.375 (34.9) 1.781 (45.2) 1.027 (26.1) 1.156 (29.4) 1.375 (34.9) 1.027 (26.1) 1.027 (26.1) 22 28 23 32 24 32 25 32 26 36 27 36 28 36 29 40 30 40 31 40 32 44 33 44 34 44 35 48 36 48 37 48 38 61 39 61 40 16 41 18 42 18 43 20 44 22 45 22 46 24 47 36 48 40 49* 10 50* 14 51* 16 52 18 53 61 54 20 55* 20 56 22 57 22 58* 22 59 24 60 28 61 28 62 32 63 36 64 36 65 40 66 40 67 44 68 44 69 48 70 48 71* 12 72* 18 73* 24 74 14 75 16 (c) 2013 Glenair, Inc. L Max 2.363 (60.0) 1.770 (45.0) 2.113 (53.7) 2.770 (70.4) 1.770 (45.0) 2.363 (60.0) 3.020 (76.7) 1.770 (45.0) 2.363 (60.0) 3.020 (76.7) 1.770 (45.0) 2.363 (60.0) 3.020 (76.7) 1.770 (45.0) 2.363 (60.0) 3.020 (76.7) 1.551 (39.4) 2.113 (53.7) 1.332 (33.8) .957 (24.3) 1.145 (29.1) 1.145 (29.1) .957 (24.3) 1.145 (29.1) 1.332 (33.8) 1.551 (39.4) 1.551 (39.4) 1.145 (29.1) 1.551 (39.4) 1.770 (45.0) 1.551 (39.4) 1.770 (45.0) 1.551 (39.4) 2.113 (53.7) 1.332 (33.8) 1.770 (45.0) 2.113 (53.7) 1.770 (45.0) 1.551 (39.4) 2.113 (53.7) 2.363 (60.0) 2.113 (53.7) 2.770 (70.4) 2.113 (53.7) 2.770 (70.4) 2.113 (53.7) 2.770 (70.4) 2.113 (53.7) 2.770 (70.4) 1.332 (33.8) 1.770 (45.0) 2.113 (53.7) .957 (24.3) .957 (24.3) Cable Range Min Max 1.000 (25.4) .625 (15.9) .875 (22.2) 1.250 (31.8) .625 (15.9) 1.000 (25.4) 1.437 (36.5) .625 (15.9) 1.000 (25.4) 1.437 (36.5) .625 (15.9) 1.000 (25.4) 1.437 (36.5) .625 (15.9) 1.000 (25.4) 1.437 (36.5) .500 (12.7) .875 (22.2) .350 (8.9) .125 (3.2) .250 (6.4) .250 (6.4) .125 (3.2) .250 (6.4) .350 (8.9) .500 (12.7) .500 (12.7) .250 (6.4) .500 (12.7) .625 (15.9) .500 (12.7) .625 (15.9) .500 (12.7) .875 (22.2) .350 (8.9) .625 (15.9) .875 (22.2) .625 (15.9) .500 (12.7) .875 (22.2) 1.000 (25.4) .875 (22.2) 1.250 (31.8) .875 (22.2) 1.250 (31.8) .875 (22.2) 1.250 (31.8) .875 (22.2) 1.250 (31.8) .350 (8.9) .625 (15.9) .875 (22.2) .125 (3.2) .125 (3.2) 1.375 (34.9) .937 (23.8) 1.250 (31.8) 1.625 (41.3) .937 (23.8) 1.375 (34.9) 1.840 (46.7) .937 (23.8) 1.375 (34.9) 1.875 (47.6) .937 (23.8) 1.375 (34.9) 1.875 (47.6) .937 (23.8) 1.375 (34.9) 1.875 (47.6) .750 (19.1) 1.184 (30.1) .625 (15.9) .312 (7.9) .437 (11.1) .437 (11.1) .312 (7.9) .437 (11.1) .625 (15.9) .750 (19.1) .750 (19.1) .437 (11.1) .750 (19.1) .937 (23.8) .750 (19.1) .937 (23.8) .750 (19.1) 1.250 (31.8) .625 (15.9) .937 (23.8) 1.250 (31.8) .937 (23.8) .750 (19.1) 1.250 (31.8) 1.375 (34.9) 1.250 (31.8) 1.625 (41.3) 1.250 (31.8) 1.625 (41.3) 1.250 (31.8) 1.625 (41.3) 1.250 (31.8) 1.625 (41.3) .625 (15.9) .937 (23.8) 1.250 (31.8) .312 (7.9) .312 (7.9) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 M85049/42 Ref. 24 16 20 28 16 24 32 16 24 32 16 24 32 16 24 32 12 20 10 4 6 6 4 6 10 12 12 6 12 16 12 16 12 20 10 16 20 16 12 20 24 20 28 20 28 20 28 20 28 10 16 20 4 4 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-22 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: A Basic Part Number AS50151 Series AS34001 MIL-DTL-26482 Series II AS81703 Series III MIL-DTL-83723 Series I & III 40M39569, DEF 5326-3, EN 2997 EN 3646, ESC 10, ESC 11, LN 29504 NFC93422 Series HE302 PAN 6432-1, PAN 6432-2, PATT 602 2. 3. 4. Superseded Part Number Dash Number (Table II) MS3188A 21 C M85049/8 - 21 APPLICATION NOTES 1. AS85049 AS85049/8 and MS3188A 90 EMI/RFI Environmental Backshell For complete dimensions see the applicable Military Specification. When maximum cable entry is exceeded, Style 2 will be supplied. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. W Finish / Material B = Black Cadmium / Stainless Steel N = Electroless Nickel / Aluminum S = Passivated / Stainless Steel W = 1,000 Hr. Cadmium Olive Drab over Electroless Nickel / Aluminum X = Aluminum, Nickel Fluorocarbon Polymer Z = Aluminum, Zinc-Nickel, Black XS = Stainless Steel, Nickel Flurocarbon Polymer ZS = Stainless Steel, Zinc-Nickel, Black STYLE 2 Basic Part No. Dash No. Finish (Material is Aluminum Only) A = Cadmium Olive Drab over Nickel C = Cadmium Olive Drab N = Electroless Nickel A Thread (Table I), Page 39-11 TABLE I: Dash Number, Cable Range and Dimensions Dash No. Shell Size H Max J Max K Ref. 1 2 L Max Cable Range Min Max M85049/42 Ref. 3 .761 (19.3) 1.924 (48.9) 1.544 (39.2) .957 (24.3) .125 (3.2) .250 (6.4) 4 3 1.511 (38.4) 1.444 (36.7) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 3 8 .666 (16.9) 1.324 (33.6) 1.544 (39.2) .957 (24.3) .125 (3.2) .250 (6.4) 4 4 10 .761 (19.3) 2.044 (51.9) 1.544 (39.2) .957 (24.3) .125 (3.2) .312 (7.9) 4 5 10 .761 (19.3) 1.444 (36.7) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .375 (9.5) 6 6 12 .766 (19.5) 2.064 (52.4) 1.544 (39.2) .957 (24.3) .125 (3.2) .312 (7.9) 4 7 12 .766 (19.5) 2.064 (52.4) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 8 12 .766 (19.5) 1.459 (37.1) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .500 (12.7) 10 9 14 .866 (22.0) 2.134 (54.2) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 10 14 .866 (22.0) 1.779 (45.2) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .575 (14.6) 10 11 16 1.051 (26.7) 2.224 (56.5) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 12 16 1.051 (26.7) 1.869 (47.5) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .700 (17.8) 12 13 18 1.141 (29.0) 2.394 (60.8) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 14 18 1.141 (29.0) 2.044 (51.9) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .779 (19.8) 16 15 20 1.141 (29.0) 2.394 (60.8) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 16 20 1.141 (29.0) 2.044 (51.9) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .904 (23.0) 16 17 22 1.291 (32.8) 2.504 (63.6) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 18 22 1.291 (32.8) 2.149 (54.6) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.029 (26.1) 20 19 24 1.291 (32.8) 2.504 (63.6) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 20 24 1.291 (32.8) 2.149 (54.6) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.144 (29.1) 20 21 28 1.391 (35.3) 2.674 (67.9) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 Continued on Page B-23 (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-23 E-Mail: sales@glenair.com B AS85049 AS85049/8 and MS3188A 90 EMI/RFI Environmental Backshell TABLE I: Continued from Page B-23 B (c) 2013 Glenair, Inc. Dash No. Shell Size H Max J Max K Ref. L Max Cable Range Min Max M85049/42 Ref. 22 28 1.391 (35.3) 2.319 (58.9) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 23 32 1.741 (44.2) 2.924 (74.3) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 24 32 1.741 (44.2) 2.924 (74.3) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 25 32 1.741 (44.2) 2.569 (65.3) 2.550 (64.8) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 26 36 1.941 (49.3) 2.894 (73.5) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 27 36 1.941 (49.3) 2.894 (73.5) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 28 36 1.941 (49.3) 2.539 (64.5) 2.600 (66.0) 3.020 (76.7) 1.437 (36.5) 1.840 (46.7) 32 29 40 2.691 (68.4) 2.894 (73.5) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 30 40 2.691 (68.4) 2.894 (73.5) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 31 40 2.691 (68.4) 2.539 (64.5) 2.600 (66.0) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 32 44 2.691 (68.4) 2.894 (73.5) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 33 44 2.691 (68.4) 2.894 (73.5) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 34 44 2.691 (68.4) 2.539 (64.5) 2.600 (66.0) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 35 48 2.691 (68.4) 2.894 (73.5) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 36 48 2.691 (68.4) 2.894 (73.5) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 37 48 2.691 (68.4) 2.539 (64.5) 2.600 (66.0) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 38 61 1.291 (32.8) 2.504 (63.6) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 39 61 1.291 (32.8) 2.149 (54.6) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.184 (30.1) 20 40 16 1.051 (26.7) 2.224 (56.5) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 41 18 1.141 (29.0) 2.394 (60.8) 1.544 (39.2) .957 (24.3) .125 (3.2) .312 (7.9) 4 42 18 1.141 (29.0) 2.394 (60.8) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 43 20 1.141 (29.0) 2.394 (60.8) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 44 22 1.291 (32.8) 2.504 (63.6) 1.544 (39.2) .957 (24.3) .125 (3.2) .312 4 45 22 1.291 (32.8) 2.504 (63.6) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 46 24 1.291 (32.8) 2.504 (63.6) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 47 36 1.941 (49.3) 2.894 (73.5) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 48 40 1.941 (49.3) 2.894 (73.5) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 49* 10 1.516 (38.5) 2.064 (52.4) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 50* 14 1.891 (48.0) 2.394 (60.8) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 51* 16 2.041 (51.8) 2.504 (63.6) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 52 18 1.141 (29.0) 2.394 (60.8) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 53 61 1.291 (32.8) 2.149 (54.6) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 54 20 1.141 (29.0) 2.394 (60.8) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 55* 20 2.141 (54.4) 2.674 (67.9) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 56 22 1.291 (32.8) 2.504 (63.6) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 57 22 1.291 (32.8) 2.504 (63.6) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 58* 22 2.141 (54.4) 2.674 (67.9) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 59 24 1.291 (32.8) 2.504 (63.6) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 60 28 1.391 (35.3) 2.674 (67.9) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 61 28 1.391 (35.3) 2.674 (67.9) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 62 32 1.741 (44.2) 2.924 (74.3) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 63 36 1.941 (49.3) 2.894 (73.5) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 64 36 1.941 (49.3) 2.894 (73.5) 2.550 (64.8) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 65 40 2.691 (68.4) 2.894 (73.5) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 66 40 2.691 (68.4) 2.894 (73.5) 2.550 (64.8) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 67 44 2.691 (68.4) 2.894 (73.5) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 68 44 2.691 (68.4) 2.894 (73.5) 2.550 (64.8) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 69 48 2.691 (68.4) 2.894 (73.5) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 70 48 2.691 (68.4) 2.894 (73.5) 2.550 (64.8) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 71* 12 1.811 (46.0) 2.224 (56.5) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 72* 18 2.051 (52.1) 2.504 (63.6) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 73* 24 2.151 (54.6) 2.674 (67.9) 2.230 (56.6) 2.116 (53.7) .875 (22.2) 1.250 (31.8) 20 74 14 .866 (22.0) 2.134 (54.2) 1.544 (39.2) .957 (24.3) .125 (3.2) .312 (7.9) 04 75 16 1.051 (26.7) 2.224 (56.5) 1.544 (39.2) .957 (24.3) .125 (3.2) .312 (7.9) 04 (7.9) * Denotes Style 2 Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-24 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: A AS50151 Series AS34001 MIL-DTL-26482 Series II AS81703 Series III MIL-DTL-83723 Series I & III 40M39569, DEF 5326-3, EN 2997 EN 3646, ESC 10, ESC 11, LN 29504 NFC93422 Series HE302 PAN 6432-1, PAN 6432-2, PATT 602 Basic Part Number AS85049 AS85049/9 and MS3188B 90 Environmental Backshell Superseded Part Number Dash Number (Table II) MS3188B 21 N M85049/9 - 21 N Finish / Material B = Black Cadmium / Stainless Steel N = Electroless Nickel / Aluminum S = Passivated / Stainless Steel W = 1,000 Hr. Cadmium Olive Drab over Electroless Nickel / Aluminum X = Nickel Fluorocarbon Polymer Y = Pure Dense Electrodeposited Aluminum Z = Zinc Nickel XS = Nickel Fluorocarbon Polymer / Stainless Steel YS = Pure Dense Electrodeposited Aluminum / Stainless Steel ZS = Zinc Nickel, Black / Stainless Steel Basic Part No. Dash No. Finish (Material is Aluminum Only) A = Cadmium Olive Drab over Nickel C = Cadmium Olive Drab N = Electroless Nickel APPLICATION NOTES 1. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. When maximum cable entry is exceeded, Style 2 will be supplied. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Approximate chain lengths: Dash No. 01-12 = 5.0 (127.0); Dash No. 13-29 = 6.0 (152.4). 2. 3. 4. 5. TABLE II: Dash Number and Cable Range (Continued on Page B-26) Dash Shell No. Size H Max J Max K Ref. L Max Cable Range Min Max M85049/42 Ref. 1 03 .761 (19.3) 1.862 (47.3) 1.027 (26.1) .957 (24.3) .125 (3.2) .250 (6.4) 4 2 03 1.511 (38.4) 1.382 (35.1) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 3 08 .666 (16.9) 1.262 (32.1) 1.027 (26.1) .957 (24.3) .125 (3.2) .250 (6.4) 4 4 10 .761 (19.3) 1.982 (50.3) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 4 5 10 .761 (19.3) 1.382 (35.1) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .375 (9.5) 6 6 12 .766 (19.5) 2.002 (50.9) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 4 7 12 .766 (19.5) 2.002 (50.9) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 8 12 .766 (19.5) 1.397 (35.5) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .500 (12.7) 10 9 14 .866 (22.0) 2.072 (52.6) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 10 14 .866 (22.0) 1.717 (43.6) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .575 (14.6) 10 11 16 1.051 (26.7) 2.162 (54.9) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 12 16 1.051 (26.7) 1.807 (45.9) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .700 (17.8) 12 13 18 1.141 (29.0) 2.332 (59.2) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 14 18 1.141 (29.0) 1.982 (50.3) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .779 (19.8) 16 15 20 1.141 (29.0) 2.332 (59.2) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 16 20 1.141 (29.0) 1.982 (50.3) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .904 (23.0) 16 17 22 1.291 (32.8) 2.442 (62.0) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 18 22 1.291 (32.8) 2.087 (53.0) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.029 (26.1) 20 19 24 1.291 (32.8) 2.442 (62.0) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 20 24 1.291 (32.8) 2.087 (53.0) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.144 (29.1) 20 21 28 1.391 (35.3 2.612 (66.3) 1.156 (33.7) 1.770 (45.0) .625 (15.9) 16 .937 (23.8) Table Continued on Page B-26 (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-25 E-Mail: sales@glenair.com B AS85049 AS85049/9 and MS3188B 90 Environmental Backshell TABLE II: Dash Number and Cable Range (Continued From Page B-25 Dash Shell No. Size B H Max J Max K Ref. L Max Cable Range Min Max M85049/42 Ref. 22 28 1.391 (35.3) 2.257 (57.3) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 23 32 1.741 (44.2) 2.862 (72.7) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 24 32 1.741 (44.2) 2.862 (72.7) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 25 32 1.741 (44.2) 2.507 (63.7) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 26 36 1.941 (49.3) 2.832 (71.9) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 27 36 1.941 (49.3) 2.832 (71.9) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 28 36 1.941 (49.3) 2.477 (62.9) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.840 (46.7) 32 29 40 2.691 (68.4) 2.832 (71.9) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 30 40 2.691 (68.4) 2.832 (71.9) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 31 40 2.691 (68.4) 2.477 (62.9) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 32 44 2.691 (68.4) 2.832 (71.9) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 33 44 2.691 (68.4) 2.832 (71.9) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 34 44 2.691 (68.4) 2.477 (62.9) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 35 48 2.691 (68.4) 2.832 (71.9) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 36 48 2.691 (68.4) 2.832 (71.9) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 37 48 2.691 (68.4) 2.477 (62.9) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 38 61 1.291 (32.8) 2.442 (62.0) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 39 61 1.291 (32.8) 2.087 (53.0) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.184 (30.1) 20 40 16 1.051 (26.7) 2.162 (54.9) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 41 18 1.141 (29.0) 2.332 (59.2) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 4 42 18 1.141 (29.0) 2.332 (59.2) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 43 20 1.141 (29.0) 2.332 (59.2) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 44 22 1.291 (32.8) 2.442 (62.0) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 4 45 22 1.291 (32.8) 2.442 (62.0) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 46 24 1.291 (32.8) 2.442 (62.0) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 47 36 1.941 (49.3) 2.832 (71.9) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 48 40 1.941 (49.3) 2.832 (71.9) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 49* 10 1.516 (38.5) 2.002 (50.9) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 50* 14 1.891 (48.0) 2.332 (59.2) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 51* 16 2.041 (51.8) 2.442 (62.0) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 52 18 1.141 (29.0) 2.332 (59.2) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 53 61 1.291 (32.8) 2.087 (53.0) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 54 20 1.141 (29.0) 2.332 (59.2) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 55* 20 2.141 (54.4) 2.612 (66.3) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 56 22 1.291 (32.8) 2.442 (62.0) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 57 22 1.291 (32.8) 2.442 (62.0) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 58* 22 2.141 (54.4) 2.612 (66.3) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 59 24 1.291 (32.8) 2.442 (62.0) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 60 28 1.391 (35.3) 2.612 (66.3) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 61 28 1.391 (35.3) 2.612 (66.3) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 62 32 1.741 (44.2) 2.862 (72.7) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 63 36 1.941 (49.3) 2.832 (71.9) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 64 36 1.941 (49.3) 2.832 (71.9) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 65 40 2.691 (68.4) 2.832 (71.9) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 66 40 2.691 (68.4) 2.832 (71.9) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 67 44 2.691 (68.4) 2.832 (71.9) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 68 44 2.691 (68.4) 2.832 (71.9) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 69 48 2.691 (68.4) 2.832 (71.9) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 70 48 2.691 (68.4) 2.832 (71.9) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 71* 12 1.811 (46.0) 2.162 (54.9) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 72* 18 2.051 (52.1) 2.442 (62.0) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 73* 24 2.151 (54.6) 2.612 (66.3) 1.375 (34.9) 2.116 (53.7) .875 (22.2) 1.250 (31.8) 20 74 14 .866 (22.0) 2.072 (52.6) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 4 75 16 1.051 (26.7) 2.162 (54.9) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 4 (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-26 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: A AS50151 Series AS34001 MIL-DTL-26482 Series II AS81703 Series III MIL-DTL-83723 Series I & III 40M39569, DEF 5326-3, EN 2997 EN 3646, ESC 10, ESC 11, LN 29504 NFC93422 Series HE302 PAN 6432-1, PAN 6432-2, PATT 602 Basic Part Number Superseded Part Number Dash Number (Table II) MS3437A 21 C M85049/10 - 21 W Finish / Material B = Black Cadmium / Stainless Steel N = Electroless Nickel / Aluminum S = Passivated / Stainless Steel W = 1,000 Hr. Cadmium Olive Drab over Electroless Nickel / Aluminum X = Aluminum, Nickel Fluorocarbon Polymer Z = Aluminum, Zinc-Nickel, Black XS = Stainless Steel, Nickel Flurocarbon Polymer ZS = Stainless Steel, Zinc-Nickel, Black TABLE I: Shell Size and Dimensions (c) 2013 Glenair, Inc. AS85049 AS85049/10 and MS3437A Straight EMI/RFI Environmental Backshell Shell Size A Thread Class 2B C Dia Max 3 .562 - 24 UNEF .67 (17.0) 8 .500 - 20 UNF .62 (15.7) 10 .625 - 24 UNEF .73 (18.5) 12 .750 - 20 UNEF .86 (21.8) 14 .875 - 20 UNEF .98 (24.9) 16 1.000 - 20 UNEF 1.11 (28.2) 18 1.062 - 18 UNEF 1.22 (31.0) 20 1.188 - 18 UNEF 1.34 (34.0) 22 1.313 - 18 UNEF 1.47 (37.3) 24 1.438 - 18 UNEF 1.59 (40.4) 28 1.750 - 18 UNS 1.97 (50.0) 32 2.000 - 18 UNS 2.22 (56.4) 36 2.250 - 16 UN 2.47 (62.7) 40 2.500 - 16 UN 2.72 (69.1) 44 2.750 - 16 UN 2.97 (75.4) 48 3.000 - 16 UN 3.22 (81.8) 61 1.500 - 18 UNEF 1.65 (41.9) Basic Part No. Dash No. Finish (Material is Aluminum Only) A = Cadmium Olive Drab over Nickel C = Cadmium Olive Drab N = Electroless Nickel APPLICATION NOTES 1. 2. 3. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-27 E-Mail: sales@glenair.com B AS85049 AS85049/10 and MS3437A Straight EMI/RFI Environmental Backshell TABLE II: Dash No., Style, Shell Size, Dimensions and Cable Range B Dash No. Shell Size Style K Ref L Max 01 3 1 2.125 02 3 1 3.125 (54.0) 1.544 (39.2) .957 (24.3) .125 (3.2) .250 (6.4) 4 (79.4) 1.544 (39.2) .957 (24.3) .125 (3.2) .250 (6.4) 03 3 2 4 2.875 (73.0) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 04 3 6 2 3.875 (98.4) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 05 6 8 1 2.125 (54.0) 1.544 (39.2) .957 (24.3) .125 (3.2) .250 (6.4) 4 06 8 1 3.125 (79.4) 1.544 (39.2) .957 (24.3) .125 (3.2) .250 (6.4) 4 07 8 2 2.875 (73.0) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 08 8 2 3.875 (98.4) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 09 10 1 2.125 (54.0) 1.544 (39.2) .957 (24.3) .125 (3.2) .312 (7.9) 4 10 10 1 3.125 (79.4) 1.544 (39.2) .957 (24.3) .125 (3.2) .312 (7.9) 4 11 10 2 2.875 (73.0) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 12 10 2 3.875 (98.4) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 13 12 1 2.125 (54.0) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 14 12 1 3.125 (79.4) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 15 12 2 2.875 (73.0) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 16 12 2 3.875 (98.4) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 17 14 1 2.125 (54.0) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .575 (14.6) 10 18 14 1 3.125 (79.4) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .575 (14.6) 10 19 14 2 2.875 (73.0) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 20 14 2 3.875 (98.4) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 21 16 1 2.125 (54.0) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .700 (17.8) 12 22 16 1 3.125 (79.4) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .700 (17.8) 12 23 16 2 2.875 (73.0) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 24 16 2 3.875 (98.4) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 25 18 1 2.125 (54.0) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 26 18 1 3.125 (79.4) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 27 18 1 2.125 (54.0) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 28 18 1 3.125 (79.4) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 29 18 2 2.875 (73.0) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 30 18 2 3.875 (98.4) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 31 20 1 3.125 (79.4) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 32 20 1 4.125 (104.8) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 33 20 1 3.125 (79.4) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 34 20 1 4.125 (104.8) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 35 20 2 3.875 (98.4) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 36 20 2 4.875 (123.8) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 37 20 2 3.875 (98.4) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 38 20 2 4.875 (123.8) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 39 22 1 3.125 (79.4) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 40 22 1 4.125 (104.8) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 41 22 1 3.125 (79.4) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 42 22 1 4.125 (104.8) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 43 22 1 3.125 (79.4) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 44 22 1 4.125 (104.8) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 45 22 2 3.875 (98.4) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 46 22 2 4.875 (123.8) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 47 24 1 3.125 (79.4) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 48 24 1 4.125 (104.8) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 49 24 1 3.125 (79.4) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .812 (20.6) 16 50 24 1 4.125 (104.8) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .812 (20.6) 16 51 24 1 3.125 (79.4) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 52 24 1 4.125 (104.8) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 E Max Cable Range Min Max M85049/42 Ref. Continued on Page B-29 (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-28 E-Mail: sales@glenair.com AS85049 AS85049/10 and MS3437A Straight EMI/RFI Environmental Backshell TABLE II: (Continued from Page B-28) Dash No. Shell Size Style K Ref L Max 53 24 2 54 24 2 3.875 (98.4) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 4.875 (123.8) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 55 28 1 20 3.125 (79.4) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 56 28 12 1 4.125 (104.8) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 57 12 28 1 3.125 (79.4) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 58 28 1 4.125 (104.8) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 59 28 1 3.125 (79.4) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 60 28 1 4.125 (104.8) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 61 28 1 3.125 (79.4) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 62 28 1 4.126 (104.8) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 63 32 1 3.125 (79.4) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 64 32 1 4.125 (104.8) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 65 32 1 3.125 (79.4) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 66 32 1 4.125 (104.8) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 67 32 1 3.125 (79.4) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 68 32 1 4.125 (104.8) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 69 32 1 3.125 (79.4) 2.550 (64.8) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 70 32 1 4.125 (104.8) 2.550 (64.8) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 71 36 1 4.125 (104.8) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 72 36 1 5.125 (130.2) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 73 36 1 4.125 (104.8) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 74 36 1 5.125 (130.2) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 75 36 1 4.125 (104.8) 2.550 (64.8) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 76 36 1 5.125 (130.2) 2.550 (64.8) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 77 36 2 5.000 (127.0) 2.600 (66.0) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 78 36 2 6.000 (152.4) 2.600 (66.0) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 79 40 1 4.125 (104.8) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 80 40 1 5.125 (130.2) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 81 40 1 4.125 (104.8) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 82 40 1 5.125 (130.2) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 83 40 1 4.125 (104.8) 2.550 (64.8) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 84 40 1 5.125 (130.2) 2.550 (64.8) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 85 40 1 4.125 (104.8) 2.600 (66.0) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 86 40 1 5.125 (130.2) 2.600 (66.0) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 87 44 1 4.125 (104.8) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 88 44 1 5.125 (130.2) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 89 44 1 4.125 (104.8) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 90 44 1 5.125 (130.2) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 91 44 1 4.125 (104.8) 2.550 (64.8) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 92 44 1 5.125 (130.2) 2.550 (64.8) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 93 44 1 4.125 (104.8) 2.600 (66.0) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 94 44 1 5.125 (130.2) 2.600 (66.0) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 95 48 1 4.125 (104.8) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 96 48 1 5.125 (130.2) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 97 48 1 4.125 (104.8) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 98 48 1 5.125 (130.2) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 99 48 1 4.125 (104.8) 2.550 (64.8) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 100 48 1 5.125 (130.2) 2.550 (64.8) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 101 48 1 4.125 (104.8) 2.600 (66.0) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 102 48 1 5.125 (130.2) 2.600 (66.0) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 103 61 1 3.125 (79.4) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 104 61 1 4.125 (104.8) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 E Max Cable Range Min Max M85049/42 Ref. Continued on Page B-30 (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 B Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-29 E-Mail: sales@glenair.com AS85049 AS85049/10 and MS3437A Straight EMI/RFI Environmental Backshell TABLE II: (Continued from Page B-29 B (c) 2013 Glenair, Inc. Dash No. Shell Size Style K Ref L Max 105 61 1 3.125 106 61 1 (79.4) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 4.125 (104.8) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 107 61 2 3.875 16 (98.4) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 108 61 20 2 4.875 (123.8) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 109 20 61 2 3.875 (98.4) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 110 61 2 4.875 (123.8) 2.024 (51.4) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 111 12 1 2.125 (54.0) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .500 (12.7) 10 112 16 1 2.125 (54.0) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 113 16 1 3.125 (79.4) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 114 12 1 2.125 (54.0) 1.544 (39.2) .957 (24.3) .125 (3.2) .312 (7.9) 4 115 12 1 3.125 (79.4) 1.544 (39.2) .957 (24.3) .125 (3.2) .312 (7.9) 4 116 14 1 2.125 (54.0) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 117 14 1 3.125 (79.4) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 118 16 1 2.125 (54.0) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 E Max Cable Range Min Max M85049/42 Ref. 119 16 1 3.125 (79.4) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 120 18 1 2.125 (54.0) 1.544 (39.2) .957 (24.3) .125 (3.2) .312 (7.9) 4 121 18 1 3.125 (79.4) 1.544 (39.2) .957 (24.3) .125 (3.2) .312 (7.9) 4 122 18 1 2.125 (54.0) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 123 18 1 3.125 (79.4) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 124 20 1 3.125 (79.4) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 125 20 1 4.125 (104.8) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 126 22 1 3.125 (79.4) 1.544 (39.2) .957 (24.3) .125 (3.2) .312 (7.9) 4 127 22 1 4.125 (104.8) 1.544 (39.2) .957 (24.3) .125 (3.2) .312 (7.9) 4 128 22 1 3.125 (79.4) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 129 22 1 4.125 (104.8) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 130 24 1 3.125 (79.4) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 131 24 1 4.125 (104.8) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 132 36 1 4.125 (104.8) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 133 36 1 5.125 (130.2) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 134 40 1 4.125 (104.8) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 135 40 1 5.125 (130.2) 1.916 (48.7) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 136 10 1 2.125 (54.0) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .375 (9.5) 6 137 10 1 3.125 (79.4) 1.544 (39.2) 1.145 (29.1) .250 (6.4) .375 (9.5) 6 138 12 1 2.125 (54.0) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .500 (12.7) 10 139 12 1 3.125 (79.4) 1.844 (46.8) 1.332 (33.8) .350 (8.9) .500 (12.7) 10 140 20 1 3.125 (79.4) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .904 (23.0) 16 141 20 1 4.125 (104.8) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .904 (23.0) 16 142 22 1 3.125 (79.4) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.029 (26.1) 20 143 22 1 4.125 (104.8) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.029 (26.1) 20 144 24 1 3.125 (79.4) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.144 (29.1) 20 145 24 1 4.125 (104.8) 2.230 (56.6) 2.113 (53.7) .875 (22.2) 1.144 (29.1) 20 146 36 1 4.125 (104.8) 2.600 (66.0) 3.020 (76.7) 1.437 (36.5) 1.840 (46.7) 32 147 36 1 5.125 (130.2) 2.600 (66.0) 3.020 (76.7) 1.437 (36.5) 1.840 (46.7) 32 148 36 1 4.125 (104.8) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 149 36 1 5.125 (130.2) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 150 14 1 2.125 (54.0) 1.544 (39.2) .957 (24.3) .125 (3.2) .312 (7.9) 4 151 14 1 3.125 (79.4) 1.544 (39.2) .957 (24.3) .125 (3.2) .312 (7.9) 4 152 16 1 2.125 (54.0) 1.544 (39.2) .957 (24.3) .125 (3.2) .312 (7.9) 4 153 16 1 3.125 (79.4) 1.544 (39.2) .957 (24.3) .125 (3.2) .312 (7.9) 4 154 44 1 4.125 (104.8) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 155 44 1 5.125 (130.2) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 156 40 1 4.125 (104.8) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 157 40 1 5.125 (130.2) 2.000 (50.8) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-30 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: A AS50151 Series AS34001 MIL-DTL-26482 Series II AS81703 Series III MIL-DTL-83723 Series I & III 40M39569, DEF 5326-3, EN 2997 EN 3646, ESC 10, ESC 11, LN 29504 NFC93422 Series HE302 PAN 6432-1, PAN 6432-2, PATT 602 Basic Part Number AS85049 AS85049/11 and MS3437B Straight Environmental Backshell Superseded Part Number Dash Number (Table II) MS3437B 21 N M85049/11 - 21 N Finish / Material B = Black Cadmium / Stainless Steel N = Electroless Nickel / Aluminum S = Passivated / Stainless Steel W = 1,000 Hr. Cadmium Olive Drab over Electroless Nickel / Aluminum X = Nickel Fluorocarbon Polymer / Aluminum Y = Pure Dense Electrodeposited Aluminum / Aluminum Z = Zinc Nickel, Black / Aluminum XS = Nickel Fluorocarbon Polymer / Stainless Steel YS = Pure Dense Electrodeposited Aluminum / Stainless Steel ZS = Zinc Nickel, Black / Stainless Steel Basic Part No. Dash No. Finish (Material is Aluminum Only) A = Cadmium Olive Drab over Nickel C = Cadmium Olive Drab N = Electroless Nickel TABLE I: Shell Size and Dimensions Shell Size (c) 2013 Glenair, Inc. A Thread Class 2B-LH C Dia Max 3 .562 - 24 UNEF .669 (17.0) 8 .500 - 20 UNF .617 (15.7) 10 .625 - 24 UNEF .734 (18.6) APPLICATION NOTES 1. 12 .750 - 20 UNEF .858 (21.8) 14 .875 - 20 UNEF .984 (25.0) 2. 3. 16 1.000 - 20 UNEF 1.112 (28.2) 18 1.062 - 18 UNEF 1.218 (30.9) 20 1.188 - 18 UNEF 1.345 (34.2) 22 1.313 - 18 UNEF 1.468 (37.3) 24 1.438 - 18 UNEF 1.593 (40.5) 28 1.750 - 18 UNS 1.969 (50.0) 32 2.000 - 18 UNS 2.219 (56.4) 36 2.250 - 16 UN 2.469 (62.7) 40 2.500 - 16 UN 2.719 (69.1) 44 2.750 - 16 UN 2.969 (75.4) 48 3.000 - 16 UN 3.219 (81.8) 61 1.500 - 18 UNEF 1.653 (42.0) 4. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. When maximum cable entry is exceeded, Style 2 will be supplied. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-31 E-Mail: sales@glenair.com B AS85049 AS85049/11 and MS3437B Straight Environmental Backshell TABLE II: Dash Number and Cable Range (Continued on Page B-33) Dash Shell Style No. Size B E Max K Ref. L Max Cable Range Min Max M85049/42 Ref. 01 3 1 2.125 (54.0) 1.027 (26.1) .957 (24.3) .125 (3.2) .250 (6.4) 4 02 3 1 3.125 (79.4) 1.027 (26.1) .957 (24.3) .125 (3.2) .250 (6.4) 4 03 3 2 2.875 (73.0) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 04 3 2 3.875 (98.4) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 05 8 1 2.125 (54.0) 1.027 (26.1) .957 (24.3) .125 (3.2) .250 (6.4) 4 06 8 1 3.125 (79.4) 1.027 (26.1) .957 (24.3) .125 (3.2) .250 (6.4) 4 07 8 2 2.875 (73.0) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 08 8 2 3.875 (98.4) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 09 10 1 2.125 (54.0) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 4 10 10 1 3.125 (79.4) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 4 11 10 2 2.875 (73.0) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 12 10 2 3.875 (98.4) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 13 12 1 2.125 (54.0) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 14 12 1 3.125 (79.4) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 15 12 2 2.875 (73.0) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 16 12 2 3.875 (98.4) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 17 14 1 2.125 (54.0) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .575 (14.6) 10 18 14 1 3.125 (79.4) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .575 (14.6) 10 19 14 2 2.875 (73.0) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 20 14 2 3.875 (98.4) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 21 16 1 2.125 (54.0) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .700 (17.8) 12 22 16 1 3.125 (79.4) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .700 (17.8) 12 23 16 2 2.875 (73.0) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 24 16 2 3.875 (98.4) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 25 18 1 2.125 (54.0) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 26 18 1 3.125 (79.4) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 27 18 1 2.125 (54.0) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 28 18 1 3.125 (79.4) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 29 18 2 2.875 (73.0) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 30 18 2 3.875 (98.4) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 31 20 1 3.125 (79.4) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 32 20 1 4.125 (104.8) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 33 20 1 3.125 (79.4) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 34 20 1 4.125 (104.8) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 35 20 2 3.875 (98.4) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 36 20 2 4.875 (123.8) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 37 20 2 3.875 (98.4) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 38 20 2 4.875 (123.8) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 39 22 1 3.125 (79.4) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 40 22 1 4.125 (104.8) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 41 22 1 3.125 (79.4) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 42 22 1 4.125 (104.8) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 43 22 1 3.125 (79.4) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 44 22 1 4.125 (104.8) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 45 22 2 3.875 (98.4) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 46 22 2 4.875 (123.8) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 47 24 1 3.125 (79.4) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 48 24 1 4.125 (104.8) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 49 24 1 3.125 (79.4) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .812 (20.6) 16 50 24 1 4.125 (104.8) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .812 (20.6) 16 51 24 1 3.125 (79.4) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 52 24 1 4.125 (104.8) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 Continued on Page B-33 (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-32 E-Mail: sales@glenair.com AS85049 AS85049/11 and MS3437B Straight Environmental Backshell TABLE II: Dash Number and Cable Range (Continued From Page B-32) Dash No. Shell Size Style E Max K Ref. L Max Cable Range Min Max 53 24 2 3.875 54 24 2 55 28 1 3.125 56 28 57 M85049/42 Ref. (98.4) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 4.875 (123.8) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 (79.4) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 1 4.125 (104.8) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 28 1 3.125 (79.4) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 58 28 1 4.125 (104.8) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 59 28 1 3.125 (79.4) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 60 28 1 4.125 (104.8) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 61 28 1 3.125 (79.4) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 62 28 1 4.125 (104.8) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 63 32 1 3.125 (79.4) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 64 32 1 4.125 (104.8) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 65 32 1 3.125 (79.4) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 66 32 1 4.125 (104.8) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 67 32 1 3.125 (79.4) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 68 32 1 4.125 (104.8) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 69 32 1 3.125 (79.4) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 70 32 1 4.125 (104.8) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 71 36 1 4.125 (104.8) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 72 36 1 5.125 (130.2) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 73 36 1 4.125 (104.8) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 74 36 1 5.125 (130.2) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 75 36 1 4.125 (104.8) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 76 36 1 5.125 (130.2) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 77 36 2 5.000 (127.0) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 78 36 2 6.000 (152.4) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 79 40 1 4.125 (104.8) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 80 40 1 5.125 (130.2) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 81 40 1 4.125 (104.8) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 82 40 1 5.125 (130.2) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 83 40 1 4.125 (104.8) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 84 40 1 5.125 (130.2) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 85 40 1 4.125 (104.8) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 86 40 1 5.125 (130.2) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 87 44 1 4.125 (104.8) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 88 44 1 5.125 (130.2) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 89 44 1 4.125 (104.8) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 90 44 1 5.125 (130.2) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 91 44 1 4.125 (104.8) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 92 44 1 5.125 (130.2) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 93 44 1 4.125 (104.8) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 94 44 1 5.125 (130.2) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 95 48 1 4.125 (104.8) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 96 48 1 5.125 (130.2) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 97 48 1 4.125 (104.8) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 98 48 1 5.125 (130.2) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 99 48 1 4.125 (104.8) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 100 48 1 5.125 (130.2) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 101 48 1 4.125 (104.8) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 102 48 1 5.125 (130.2) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 103 61 1 3.125 (79.4) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 104 61 1 4.125 (104.8) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 B Continued on Page B-34 (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-33 E-Mail: sales@glenair.com AS85049 AS85049/11 and MS3437B Straight Environmental Backshell TABLE II: Dash Number and Cable Range (Continued From Page B-33) Dash Shell Style No. Size B (c) 2013 Glenair, Inc. E Max K Ref. L Max Cable Range Min Max M85049/42 Ref. 105 61 1 3.125 (79.4) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 106 61 1 4.125 (104.8) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 107 61 2 3.875 (98.4) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 108 61 2 4.875 (123.8) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 109 61 2 3.875 (98.4) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 110 61 2 4.875 (123.8) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 111 12 1 2.125 (54.0) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .500 (12.7) 10 112 16 1 2.125 (54.0) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 113 16 1 3.125 (79.4) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 114 12 1 2.125 (54.0) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 4 115 12 1 3.125 (79.4) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 4 116 14 1 2.125 (54.0) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 117 14 1 3.125 (79.4) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 118 16 1 2.125 (54.0) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 119 16 1 3.125 (79.4) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 120 18 1 2.125 (54.0) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 4 121 18 1 3.125 (79.4) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 4 122 18 1 2.125 (54.0) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 123 18 1 3.125 (79.4) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 124 20 1 3.125 (79.4) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 125 20 1 4.125 (104.8) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 126 22 1 3.125 (79.4) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 4 127 22 1 4.125 (104.8) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 4 128 22 1 3.125 (79.4) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 129 22 1 4.125 (104.8) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 130 24 1 3.125 (79.4) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 131 24 1 4.125 (104.8) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 132 36 1 4.125 (104.8) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 133 36 1 5.125 (130.2) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 134 40 1 4.125 (104.8) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 135 40 1 5.125 (130.2) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 136 10 1 2.125 (54.0) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .375 (9.5) 6 137 10 1 3.125 (79.4) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .375 (9.5) 6 138 12 1 2.125 (54.0) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .500 (12.7) 10 139 12 1 3.125 (79.4) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .500 (12.7) 10 140 20 1 3.125 (79.4) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .904 (23.0) 16 141 20 1 4.125 (104.8) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .904 (23.0) 16 142 22 1 3.125 (79.4) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.029 (26.1) 20 143 22 1 4.125 (104.8) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.029 (26.1) 20 144 24 1 3.125 (79.4) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.144 (29.1) 20 145 24 1 4.125 (104.8) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.144 (29.1) 20 146 36 1 4.125 (104.8) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.840 (46.7) 32 147 36 1 5.125 (130.2) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.840 (46.7) 32 148 38 1 4.125 (104.8) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 149 38 1 5.125 (130.2) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 150 14 1 2.125 (54.0) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 4 151 14 1 3.125 (79.4) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 4 152 16 1 2.125 (54.0) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 4 153 16 1 3.125 (79.4) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 4 154 44 1 4.125 (104.8) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 155 44 1 5.125 (130.2) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 156 40 1 4.125 (104.8) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 157 40 1 5.125 (130.2) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-34 E-Mail: sales@glenair.com AS85049 AS85049/14S Self-Locking E-Nut Finish A = Anodize, Black N = Electroless Nickel W = 1,000 Hour Cadmium Olive Drab over Electroless Nickel X = Nickel Fluorocarbon Polymer Y = Pure Dense Electrodeposited Aluminum Z = Zinc-Nickel, Black CONNECTOR DESIGNATOR: H MIL-DTL-38999 Series III & IV EN36455 Basic Part Number M85049/14 - N -- = Non Self-Locking S = Detented N = Non-Detented B 11 W Shell Size .38 (9.7) Max A Thread C Self-Locking Coupling Nut .660 (16.8) Max TABLE I: Shell Size, Shell Size Code, Thread and Dimensions Shell Size 9 11 13 15 17 19 21 23 25 (c) 2013 Glenair, Inc. Shell Size Code Ref. A B C D E F G H J A Thread Class 2B M12 X 1 - 6H M15 X 1 - 6H M18 X 1 - 6H 1M22 X 1 - 6H M25 X 1 - 6H M28 X 1 - 6H M31 X 1 - 6H M34 X 1 - 6H M37 X 1 - 6H OC Max .86 (21.8) .98 (24.9) 1.16 (29.5) 1.28 (32.5) 1.41 (35.8) 1.52 (38.6) 1.64 (41.7) 1.77 (45.0) 1.89 (48.0) APPLICATION NOTES 1. For complete dimensions, see the applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-35 E-Mail: sales@glenair.com AS85049 AS85049/15 and AS85049/16 45 and 90 Qwik-Ty(R) Strain Reliefs Self-Locking Coupling * Optional Ground Lug CONNECTOR DESIGNATOR: H Configuration -- = Non-Self-Locking N = Non-Detented G = Self-Locking with Ground Lug H = Non-Detented with Ground Lug S = Self-Locking without Ground Lug MIL-DTL-38999, Series III and IV EN3645 SELF-LOCKING COUPLING B Basic Part Number M85049/15 = 45 M85049/16 = 90 M85049/15 G 11 Finish A = Anodize, Black N = Electroless Nickel W = 1,000 Hour Cadmium Olive Drab over Electroless Nickel X = Nickel Fluorocarbon Polymer Y = Pure Dense Electrodeposited Aluminum Z = Zinc-Nickel, Black N Shell Size G A Thread Typ. M85049/16S = .50 (12.7) Max M85049/16G = .69 (17.5) Max E Dia E Dia H F Ground Lug Typical on M85049/15G and M85049/16G only MS3367-1 Tie Strap or Equivalent (Typical) F TABLE I: Shell Size, Thread, Cable Entry and Backshell Dimensions Shell Size A Thread Class 2B 9 11 13 15 17 19 21 23 25 M12 X 1 - 6H M15 X 1 - 6H M18 X 1 - 6H M22 X 1 - 6H M25 X 1 - 6H M28 X 1 - 6H M31 X 1 - 6H M34 X 1 - 6H M37 X 1 - 6H E Dia Max .860 .984 1.160 1.280 1.410 1.520 1.640 1.770 1.890 (21.8) (25.0) (29.5) (32.5) (35.8) (38.6) (41.7) (45.0) (48.0) F Max Cable Entry M85049/15S G Max M85049/15G G Max .264 .392 .506 .631 .756 .845 .970 1.095 1.220 1.030 1.030 1.030 1.090 1.110 1.210 1.260 1.300 1.340 1.210 1.210 1.390 1.390 1.390 1.390 1.390 1.390 1.390 (6.7) (10.0) (12.9) (16.0) (19.2) (21.5) (24.6) (27.8) (31.0) (26.2) (26.2) (26.2) (27.7) (28.2) (30.7) (32.0) (33.0) (34.0) (30.7) (30.7) (35.3) (35.3) (35.3) (35.3) (35.3) (35.3) (35.3) M85049/16 H Max 1.220 1.290 1.620 1.660 1.720 1.720 1.790 1.850 1.910 (31.0) (32.8) (41.1) (42.2) (43.7) (43.7) (45.5) (47.0) (48.5) APPLICATION NOTES 1. Assembly identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Cable entry is defined as the accomodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Metric dimensions (mm) are in parentheses. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 9.15.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-36 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: F AS85049 AS85049/17 Straight EMI/RFI Environmental Backshell N = Electroless Nickel W = 1,000 Hr. Cadmium Olive Drab over Electroless Nickel MIL-DTL-38999 Series I and II M85049/17 Basic Part Number Finish X = Aluminum, Nickel Flurocarbon Polymer Z = Aluminum, Zinc-Nickel, Black 10 N 03 A Length Code (Table IV) Omit for Standard Clamp Size (Table III) Dash Number (Table I) TABLE I: Shell Size, Thread and Dimensions Dash No. 08 10 12 14 16 18 20 22 24 B Dia Max Series I Shell Size Series II A Thread Class 2B 09 11 13 15 17 19 21 23 25 08 10 12 14 16 18 20 22 24 .438 - 28 UNEF .562 - 24 UNEF .688 - 24 UNEF .813 - 20 UNEF .938 - 20 UNEF 1.063 - 18 UNEF 1.188 - 18 UNEF 1.313 - 18 UNEF 1.438 - 18 UNEF Shell Size .570 .700 .830 .950 1.080 1.200 1.330 1.450 1.580 TABLE II: Shell Size and Clamp Size Shell Size Shell Size Dash No. Series I Series II 08 10 12 14 16 18 20 22 24 09 11 13 15 17 19 21 23 25 08 10 12 14 16 18 20 22 24 TABLE III: Clamp Size, Cable Range and Dimensions Clamp Size Min Max 01 01 02 02 02 03 03 03 04 (14.5) (17.8) (21.1) (24.1) (27.4) (30.5) (33.8) (36.8) (40.1) 02 03 04 05 06 07 08 09 10 Clamp Size 01 02 03 04 05 06 07 08 09 10 Min .062 .125 .250 .375 .500 .625 .750 .875 1.000 1.125 Cable Range Max (1.6) (3.2) (6.4) (9.5) (12.7) (15.9) (19.1) (22.2) (25.4) (28.6) .125 .250 .375 .500 .625 .750 .875 1.000 1.125 1.250 (3.2) (6.4) (9.5) (12.7) (15.9) (19.1) (22.2) (25.4) (28.6) (31.8) E Max .781 .969 1.062 1.156 1.250 1.375 1.500 1.625 1.750 1.875 (19.8) (24.6) (27.0) (29.4) (31.8) (34.9) (38.1) (41.3) (44.5) (47.6) F Max 1.250 1.250 1.250 1.250 1.312 1.375 1.500 1.625 1.625 1.625 (31.8) (31.8) (31.8) (31.8) (33.3) (34.9) (38.1) (41.3) (41.3) (41.3) APPLICATION NOTES TABLE IV: Length Code (c) 2013 Glenair, Inc. Length Code Available Shell Sizes Length Standard A B C 08 - 24 08 - 24 14 - 24 20 - 24 1.500 (38.1) 2.500 (63.5) 3.500 (88.9) 4.500 (114.3) 1. 2. 3. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-37 E-Mail: sales@glenair.com B AS85049 AS85049/18 Straight EMI/RFI Environmental Backshell CONNECTOR DESIGNATOR: H N = Electroless Nickel W = 1,000 Hr. Cadmium Olive Drab over Electroless Nickel MIL-DTL-38999, Series III and IV EN3645 M85049/18 B Basic Part Number Finish X = Aluminum, Nickel Flurocarbon Polymer Z = Aluminum, Zinc-Nickel, Black 11 N 03 Clamp Size (Table III) Shell Size (Table I) A Length Code (Table IV) Omit for Standard TABLE I: Shell Size, Thread and Dimensions Shell Size 9 11 13 15 17 19 21 23 25 B Dia Max .750 (19.1) .850 (21.6) 1.000 (25.4) 1.150 (29.2) 1.250 (31.8) 1.400 (35.6) 1.550 (39.4) 1.650 (41.9) 1.850 (47.0) A Thread Class 2B M12 X 1 - 6H M15 X 1 - 6H M18 X 1 - 6H M22 X 1 - 6H M25 X 1 - 6H M28 X 1 - 6H M31 X 1 - 6H M34 X 1 - 6H M37 X 1 - 6H TABLE II: Shell Size and Clamp Size Shell Size 9 11 13 15 17 19 21 23 25 TABLE III: Clamp Size, Cable Range and Dimensions Clamp Size Clamp Size Min Max 01 01 02 02 02 03 03 03 04 01 02 03 04 05 06 07 08 09 10 02 03 04 05 06 07 08 09 10 Min .062 .125 .250 .375 .500 .625 .750 .875 1.000 1.125 Cable Range (1.6) (3.2) (6.4) (9.5) (12.7) (15.9) (19.1) (22.2) (25.4) (28.6) Max .125 .250 .375 .500 .625 .750 .875 1.000 1.125 1.250 (3.2) (6.4) (9.5) (12.7) (15.9) (19.1) (22.2) (25.4) (28.6) (31.8) E Max .781 .969 1.062 1.156 1.250 1.375 1.500 1.625 1.750 1.875 F Max (19.8) (24.6) (27.0) (29.4) (31.8) (34.9) (38.1) (41.3) (44.5) (47.6) 1.250 1.250 1.250 1.250 1.312 1.375 1.500 1.625 1.625 1.625 (31.8) (31.8) (31.8) (31.8) (33.3) (34.9) (38.1) (41.3) (41.3) (41.3) APPLICATION NOTES TABLE IV: Length Code (c) 2013 Glenair, Inc. Length Code Available Shell Sizes Length Standard A B C 9 - 25 9 - 25 9 - 25 9 - 25 1.500 (38.1) 2.500 (63.5) 3.500 (88.9) 4.500 (114.3) 1. 2. 3. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-38 E-Mail: sales@glenair.com Finish N = Electroless Nickel W = Cadmium, Olive Drab X = Nickel Fluorocarbon Polymer Z = Zinc Nickel CONNECTOR DESIGNATOR: H AS85049 AS85049/19 Straight EMI/RFI Non-Environmental Backshell MIL-DTL-38999 Series III and IV EN3645 M85049/19 11 Basic Part Number Shell Size (Table I) W 03 Clamp Size (Table II) A Length Code (Omit for Standard) (Table III) Table III APPLICATION NOTES 1. 2. 3. (c) 2013 Glenair, Inc. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-39 E-Mail: sales@glenair.com B AS85049 AS85049/19 Straight EMI/RFI Non-Environmental Backshell TABLE I: Shell Size and Clamp Size Shell Size 9 11 13 15 17 19 21 23 25 B Clamp Size Min Max 01 02 01 03 02 04 02 05 02 06 03 07 03 08 03 09 04 10 A Thread Class 6H M12 X 1 - 6H M15 X 1 - 6H M18 X 1 - 6H M22 X 1 - 6H M25 X 1 - 6H M28 X 1 - 6H M31 X 1 - 6H M34 X 1 - 6H M37 X 1 - 6H C Dia Max .750 .850 1.000 1.100 1.250 1.400 1.500 1.650 1.700 (19.1) (21.6) (25.4) (27.9) (31.8) (35.6) (38.1) (41.9) (43.2) TABLE II: Cable Range and Dimensions Clamp Size 01 02 03 04 05 06 07 08 09 10 .062 .125 .250 .312 .437 .562 .687 .812 .937 1.062 Cable Range Min Max (1.6) .125 (3.2) .250 (6.4) .375 (7.9) .500 (11.1) .625 (14.3) .750 (17.4) .875 (20.6) 1.000 (23.8) 1.125 (27.0) 1.250 E Max (3.2) (6.4) (9.5) (12.7) (15.9) (19.1) (22.2) (25.4) (28.6) (31.8) .800 1.000 1.100 1.200 1.250 1.400 1.500 1.650 1.750 1.900 (20.3) (25.4) (27.9) (30.5) (31.8) (35.6) (38.1) (41.9) (44.5) (48.3) TABLE III: Length Code Length Code Std. A B C (c) 2013 Glenair, Inc. Available Shell Sizes 9 - 25 9 - 25 15 - 25 21 - 25 Length 1.500 (38.1) 2.500 (63.5) 3.500 (88.9) 4.500 (114.3) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-40 E-Mail: sales@glenair.com Finish N = Electroless Nickel W = 1,000 Hr. Cadmium Olive Drab over Electroless Nickel X = Aluminum, Nickel Fluorocarbon Polymer Z = Aluminum, Zinc-Nickel, Black CONNECTOR DESIGNATOR: H AS85049 AS85049/20 Straight Crimp Ring Backshell and Crimp Ring MIL-DTL-38999 Series III and IV EN3645 M85049/20 - 11 Basic Part Number W Shell Size (Table I) TABLE I: Shell Size, Thread, Cable Entry and Dimensions Shell Size A Thread Class 2B 9 11 13 15 17 19 21 23 25 M12 X 1 - 6H M15 X 1 - 6H M18 X 1 - 6H M22 X 1 - 6H M25 X 1 - 6H M28 X 1 - 6H M31 X 1 - 6H M34 X 1 - 6H M37 X 1 - 6H (c) 2013 Glenair, Inc. C Dia Max .750 .850 1.000 1.100 1.250 1.400 1.500 1.650 1.750 E Dia .015 (0.4) F Dia Max (19.1) .250 (6.4) .347 (8.8) (21.6) .325 (8.3) .498 (12.6) (25.4) .420 (10.7) .510 (13.0) (27.9) .540 (13.7) .630 (16.0) (31.8) .670 (17.0) .760 (19.3) (35.6) .789 (20.0) .890 (22.6) (38.1) .914 (23.2) 1.010 (25.7) (41.9) 1.039 (26.4) 1.130 (28.7) (44.5) 1.112 (28.2) 1.202 (30.5) M85049/26-2 Crimp Ring Ref 8 10 12 14 16 18 20 22 24 B APPLICATION NOTES 1. 2. 3. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Entry is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-41 E-Mail: sales@glenair.com AS85049 AS85049/21 Straight Non-Environmental Strain Relief Backshell CONNECTOR DESIGNATOR: Basic Part Number Shell Size M85049/21 11 MIL-DTL-38999 Series III and IV EN3645 H B Clamp Size A Finish A = Black Anodize N = Electroless Nickel W = Cadmium, Olive Drab X = Nickel Fluorocarbon Polymer Y = Pure Dense Electrodeposited Aluminum Z = Zinc Nickel 02 A Length Code (Omit for Standard) Table III TABLE III: Length Code Code Length .032 (0.8) Standard 1.50 (38.1) A 2.50 (63.5) B 3.50 (88.9) C 4.50 (114.3) TABLE I: Shell Size, Clamp Size and Dimensions Shell Size Clamp Size* Min Max A Thread Class 6H C Dia Max TABLE II: Clamp Size, Cable Range and Dimensions Clamp Size Cable Range Min Max E Max 9 01 02 M12 X 1 - 6H .750 (19.1) 01 .062 (1.6) .125 (3.2) .800 (20.3) 11 01 03 M15 X 1 - 6H .850 (21.6) 02 .125 (3.2) .250 (6.4) 1.000 (25.4) 13 02 04 M18 X 1 - 6H 1.000 (25.4) 03 .250 (6.4) .375 (9.5) 1.100 (27.9) 15 02 05 M22 X 1 - 6H 1.100 (27.9) 04 .312 (7.9) .500 (12.7) 1.200 (30.5) 17 02 06 M25 X 1 - 6H 1.250 (31.8) 05 .437 (11.1) .625 (15.9) 1.250 (31.8) 19 03 07 M28 X 1 - 6H 1.400 (35.6) 06 .562 (14.3) .750 (19.1) 1.400 (35.6) .875 (22.2) 1.500 (38.1) 21 03 08 M31 X 1 - 6H 1.500 (38.1) 07 .687 (17.4) 23 03 09 M34 X 1 - 6H 1.650 (41.9) 08 .812 (20.6) 1.000 (25.4) 1.650 (41.9) 25 04 10 M37 X 1 - 6H 1.750 (44.5) 09 .937 (23.8) 1.125 (28.6) 1.750 (44.5) 10 1.062 (27.0) 1.250 (31.8) 1.900 (48.3) *Clamp Size from Table IV, AS85049/21 Specifications. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 APPLICATION NOTES 1. 2. 3. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-42 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: A AS50151 Series AS34001 MIL-DTL-26482 Series II AS81703 Series III MIL-DTL-83723 Series I & III 40M39569, DEF 5326-3, EN 2997 EN 3646, ESC 10, ESC 11, LN 29504 NFC93422 Series HE302 PAN 6432-1, PAN 6432-2, PATT 602 Basic Part Number AS85049 AS85049/23 and MS3189C 45 EMI/RFI Non-Environmental Backshell Superseded Part Number Dash Number (Table II) MS3189C 21 N M85049/23 - 21 N Basic Part No. Dash No. Finish Finish / Material B = Black Cadmium / Stainless Steel N = Electroless Nickel / Aluminum S = Passivated / Stainless Steel W = 1,000 Hr. Cadmium Olive Drab over Electroless Nickel / Aluminum X = Aluminum, Nickel Fluorocarbon Polymer Z = Aluminum, Zinc-Nickel, Black XS = Stainless Steel, Nickel Flurocarbon Polymer ZS = Stainless Steel, Zinc-Nickel, Black (Material is Aluminum Only) A = Cadmium Olive Drab over Nickel C = Cadmium Olive Drab N = Electroless Nickel TABLE II: Dash Number, Cable Range and Dimensions Dash No. Shell Size F Max G Max K Ref. L Max Cable Range Min Max M85049/42 Ref. 1 3 .687 (17.4) 1.915 (48.6) 1.027 (26.1) .957 (24.3) .125 (3.2) .250 (6.4) 4 2 3 1.500 (38.1) 2.035 (51.7) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 3 8 .625 (15.9) 1.307 (33.2) 1.027 (26.1) .957 (24.3) .125 (3.2) .250 (6.4) 4 4 10 .687 (17.4) 1.975 (50.2) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 4 5 10 .687 (17.4) 1.370 (34.8) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .375 (9.5) 6 6 12 .750 (19.1) 2.035 (51.7) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 4 7 12 .750 (19.1) 2.035 (51.7) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 8 12 .750 (19.1) 2.035 (51.7) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .500 (12.7) 10 9 14 .812 (20.6) 2.125 (54.0) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 10 14 .812 (20.6) 1.780 (45.2) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .575 (14.6) 10 11 16 .906 (23.0) 2.235 (56.8) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 12 16 .906 (23.0) 1.875 (47.6) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .700 (17.8) 12 13 18 1.093 (27.8) 2.425 (61.6) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 14 18 1.093 (27.8) 2.062 (52.4) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .779 (19.8) 16 15 20 1.093 (27.8) 2.425 (61.6) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 16 20 1.093 (27.8) 2.062 (52.4) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .904 (23.0) 16 17 22 1.188 (30.2) 2.575 (65.4) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 18 22 1.188 (30.2) 2.218 (56.3) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.029 (26.1) 20 19 24 1.188 (30.2) 2.575 (65.4) 1.069 (27.2) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 20 24 1.188 (30.2) 2.218 (56.3) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.144 (29.1) 20 21 28 1.312 (33.3) 2.625 (66.7) 1.156 (33.7) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 APPLICATION NOTES 1. 2. 3. 4. For complete dimensions see the applicable Military Specification. When maximum cable entry is exceeded, Style 2 will be supplied. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Continued on Page B-44 (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-43 E-Mail: sales@glenair.com B AS85049 AS85049/23 and MS3189C 45 EMI/RFI Non-Environmental Backshell TABLE II: Continued from Page B-43 Dash No. B Shell Size F Max G Max K Ref. L Max Cable Range Min Max M85049/42 Ref. 22 28 1.312 (33.3) 2.281 (57.9) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 23 32 1.375 (34.9) 2.725 (69.2) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 24 32 1.375 (34.9) 2.725 (69.2) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 25 32 1.375 (34.9) 2.500 (63.5) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 26 36 1.406 (35.7) 2.815 (71.5) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 27 36 1.406 (35.7) 2.815 (71.5) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 28 36 1.406 (35.7) 2.469 (62.7) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.840 (46.7) 32 29 40 2.156 (54.8) 2.815 (71.5) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 30 40 2.156 (54.8) 2.815 (71.5) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 31 40 2.156 (54.8) 2.469 (62.7) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 32 44 2.156 (54.8) 2.815 (71.5) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 33 44 2.156 (54.8) 2.815 (71.5) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 34 44 2.156 (54.8) 2.469 (62.7) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 35 48 2.156 (54.8) 2.815 (71.5) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 36 48 2.156 (54.8) 2.815 (71.5) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 37 48 2.156 (54.8) 2.469 (62.7) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 38 61 1.188 (30.2) 2.575 (65.4) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 39 61 1.188 (30.2) 2.218 (56.3) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.184 (30.1) 20 40 16 .906 (23.0) 2.235 (56.8) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 41 18 1.093 (27.8) 2.425 (61.6) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 4 42 18 1.093 (27.8) 2.425 (61.6) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 43 20 1.093 (27.8) 2.425 (61.6) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 44 22 1.188 (30.2) 2.575 (65.4) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 4 45 22 1.188 (30.2) 2.575 (65.4) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 46 24 1.188 (30.2) 2.575 (65.4) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 47 36 1.406 (35.7) 2.815 (71.5) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 48 40 2.156 (54.8) 2.815 (71.5) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 49* 10 1.500 (38.1) 2.035 (51.7) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 50* 14 1.842 (46.8) 2.425 (61.6) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 51* 16 1.938 (49.2) 2.575 (65.4) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 52 18 1.093 (27.8) 2.425 (61.6) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 53 61 1.188 (30.2) 2.575 (65.4) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 54 20 1.093 (27.8) 2.425 (61.6) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 55* 20 2.061 (52.3) 2.625 (66.7) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 56 22 1.188 (30.2) 2.575 (65.4) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 57 22 1.188 (30.2) 2.575 (65.4) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 58* 22 2.061 (52.3) 2.625 (66.7) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 59 24 1.188 (30.2) 2.575 (65.4) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 60 28 1.312 (33.3) 2.625 (66.7) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 61 28 1.312 (33.3) 2.625 (66.7) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 62 32 1.375 (34.9) 2.725 (69.2) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 63 36 1.406 (35.7) 2.815 (71.5) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 64 36 1.406 (35.7) 2.815 (71.5) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 65 40 2.156 (54.8) 2.815 (71.5) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 66 40 2.156 (54.8) 2.815 (71.5) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 67 44 2.156 (54.8) 2.815 (71.5) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 68 44 2.156 (54.8) 2.815 (71.5) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 69 48 2.156 (54.8) 2.815 (71.5) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 70 48 2.156 (54.8) 2.815 (71.5) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 71* 12 1.684 (42.8) 2.236 (56.8) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 72* 18 1.938 (49.2) 2.575 (65.4) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 73* 24 2.061 (52.3) 2.625 (66.7) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 74 14 .812 (20.6) 2.125 (54.0) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 04 75 16 .906 (23.0) 2.235 (56.8) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 04 * Denotes Style 2 (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-44 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: A AS50151 Series AS34001 MIL-DTL-26482 Series II AS81703 Series III MIL-DTL-83723 Series I & III 40M39569, DEF 5326-3, EN 2997 EN 3646, ESC 10, ESC 11, LN 29504 NFC93422 Series HE302 PAN 6432-1, PAN 6432-2, PATT 602 A Thread (Table I, Page 38-10) C (Table I, Page 38-10) Basic Part Number AS85049 AS85049/24 and MS3188C 90 EMI/RFI Non-Environmental Backshell Superseded Part Number Dash Number (Table II) MS3188C 21 N M85049/24 - 21 N Finish / Material B = Black Cadmium / Stainless Steel N = Electroless Nickel / Aluminum S = Passivated / Stainless Steel W = 1,000 Hr. Cadmium Olive Drab over Electroless Nickel / Aluminum X = Aluminum, Nickel Fluorocarbon Polymer Z = Aluminum, Zinc-Nickel, Black XS = Stainless Steel, Nickel Flurocarbon Polymer ZS = Stainless Steel, Zinc-Nickel, Black Basic Part No. Dash No. Finish (Material is Aluminum Only) A = Cadmium Olive Drab over Nickel C = Cadmium Olive Drab N = Electroless Nickel TABLE II: Dash Number, Cable Range and Dimensions Dash Shell No. Size H Max J Max K Ref. L Max Cable Range Min Max M85049/42 Ref. 1 03 .698 (17.7) 1.862 (47.3) 1.027 (26.1) .957 (24.3) .125 (3.2) .250 (6.4) 04 2 03 1.448 (36.8) 1.382 (35.1) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 04 3 08 .603 (15.3) 1.262 (32.1) 1.027 (26.1) .957 (24.3) .125 (3.2) .250 (6.4) 04 4 10 .698 (17.7) 1.982 (50.3) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 04 5 10 .698 (17.7) 1.382 (35.1) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .375 (9.5) 06 6 12 .703 (17.9) 2.002 (50.9) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 04 7 12 .703 (17.9) 2.002 (50.9) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 06 8 12 .703 (17.9) 1.397 (35.5) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .500 (12.7) 10 9 14 .803 (20.4) 2.072 (52.6) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 06 10 14 .803 (20.4) 1.717 (43.6) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .575 (14.6) 10 11 16 .988 (25.1) 2.162 (54.9) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 06 12 16 .988 (25.1) 1.807 (45.9) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .700 (17.8) 12 13 18 1.078 (27.4) 2.332 (59.2) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 14 18 1.078 (27.4) 1.982 (50.3) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .779 (19.8) 16 15 20 1.078 (27.4) 2.332 (59.2) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 16 20 1.079 (27.4) 1.982 (50.3) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .904 (23.0) 16 17 22 1.228 (31.2) 2.442 (62.0) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 18 22 1.228 (31.2) 2.087 (53.0) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.029 (26.1) 20 19 24 1.228 (31.2) 2.442 (62.0) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 20 24 1.228 (31.2) 2.087 (53.0) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.144 (29.1) 20 21 28 1.328 (33.7) 2.612 (66.3) 1.156 (33.7) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 Continued on Page B-46 * Refer to the Mil-Spec for Complete Dimensions (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-45 E-Mail: sales@glenair.com B AS85049 AS85049/24 and MS3188C 90 EMI/RFI Non-Environmental Backshell TABLE II: Continued from Page B-45 * Refer to the Mil-DSpec for Complete Dimensions B (c) 2013 Glenair, Inc. Dash No. Shell Size H Max K Max K Ref. L Max Cable Range Min Max M85049/42 Ref. 22 28 1.328 (33.7) 2.257 (57.3) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 23 32 1.678 (42.6) 2.862 (72.7) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 24 32 1.678 (42.6) 2.862 (72.7) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 25 32 1.678 (42.6) 2.507 (63.7) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 26 36 1.878 (47.7) 2.832 (71.9) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 27 36 1.878 (47.7) 2.832 (71.9) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 28 36 1.878 (47.7) 2.477 (62.9) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.840 (46.7) 32 29 40 2.628 (66.8) 2.832 (71.9) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 30 40 2.628 (66.8) 2.832 (71.9) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 31 40 2.628 (66.8) 2.477 (62.9) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 32 44 2.628 (66.8) 2.832 (71.9) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 33 44 2.628 (66.8) 2.832 (71.9) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 34 44 2.628 (66.8) 2.477 (62.9) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 35 48 2.628 (66.8) 2.832 (71.9) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 36 48 2.628 (66.8) 2.832 (71.9) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 37 48 2.628 (66.8) 2.477 (62.9) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 38 61 1.228 (31.2) 2.442 (62.0) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 39 61 1.228 (31.2) 2.087 (53.0) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.184 (30.1) 20 40 16 .988 (25.1) 2.162 (54.9) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 41 18 1.078 (27.4) 2.332 (59.2) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 04 42 18 1.078 (27.4) 2.332 (59.2) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 06 43 20 1.078 (27.4) 2.332 (59.2) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 06 44 22 1.228 (31.2) 2.442 (62.0) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 04 45 22 1.228 (31.2) 2.442 (62.0) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 06 46 24 1.228 (31.2) 2.442 (62.0) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 47 36 1.878 (47.7) 2.832 (71.9) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 48 40 1.878 (47.7) 2.832 (71.9) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 49* 10 1.453 (36.9) 2.002 (50.9) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 06 50* 14 1.828 (46.4) 2.334 (59.3) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 51* 16 1.978 (50.2) 2.442 (62.0) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 52 18 1.078 (27.4) 2.332 (59.2) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 53 61 1.228 (31.2) 2.087 (53.0) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 54 20 1.078 (27.4) 2.332 (59.2) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 55* 20 2.078 (52.8) 2.612 (66.3) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 56 22 1.228 (31.2) 2.442 (62.0) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 57 22 1.228 (31.2) 2.442 (62.0) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 58* 22 2.078 (52.8) 2.612 (66.3) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 59 24 1.228 (31.2) 2.442 (62.0) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 60 28 1.328 (33.7) 2.612 (66.3) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 61 28 1.328 (33.7) 2.612 (66.3) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 62 32 1.678 (42.6) 2.862 (72.7) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 63 36 1.878 (47.7) 2.832 (71.9) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 64 36 1.878 (47.7) 2.832 (71.9) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 65 40 2.628 (66.8) 2.832 (71.9) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 66 40 2.628 (66.8) 2.832 (71.9) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 28 67 44 2.628 (66.8) 2.832 (71.9) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 68 44 2.628 (66.8) 2.832 (71.9) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 69 48 2.628 (66.8) 2.832 (71.9) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 70 48 2.628 (66.8) 2.832 (71.9) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 71* 12 1.748 (44.4) 2.162 (54.9) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 72* 18 1.988 (50.5) 2.442 (62.0) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 73* 24 2.088 (53.0) 2.612 (66.3) 1.375 (34.9) 2.116 (53.7) .875 (22.2) 1.250 (31.8) 20 74 14 .803 (20.4) 2.072 (52.6) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 04 75 16 .988 (25.1) 2.162 (54.9) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 04 Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-46 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: A AS50151 Series AS34001 MIL-DTL-26482 Series II AS81703 Series III MIL-DTL-83723 Series I & III 40M39569, DEF 5326-3, EN 2997 EN 3646, ESC 10, ESC 11, LN 29504 NFC93422 Series HE302 PAN 6432-1, PAN 6432-2, PATT 602 Basic Part Number AS85049 AS85049/25 and MS3437C Straight EMI/RFI Non-Environmental Backshell Superseded Part Number Dash Number (Table II) MS3188C 21 N M85049/25 - 21 N Finish / Material B = Black Cadmium / Stainless Steel N = Electroless Nickel / Aluminum S = Passivated / Stainless Steel W = 1,000 Hr. Cadmium Olive Drab over Electroless Nickel / Aluminum X = Aluminum, Nickel Fluorocarbon Polymer Z = Aluminum, Zinc-Nickel, Black XS = Stainless Steel, Nickel Flurocarbon Polymer ZS = Stainless Steel, Zinc-Nickel, Black Basic Part No. Dash No. Finish (Material is Aluminum Only) A = Cadmium Olive Drab over Nickel C = Cadmium Olive Drab N = Electroless Nickel APPLICATION NOTES 1. 2. 3. 4. (c) 2013 Glenair, Inc. For complete dimensions see the applicable Military Specification. When maximum cable entry is exceeded, Style 2 will be supplied. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-47 E-Mail: sales@glenair.com B AS85049 AS85049/25 and MS3437C Straight EMI/RFI Non-Environmental Backshell TABLE I: Shell Size B TABLE II: Dash Number, Dimensions and Cable Range Dash No. A Thread Class 2B C Dia Ref Dash No. Shell Size Style E Max F Ref. L Max 03 .562 - 24 UNEF .77 (19.6) 01 03 1 2.062 (52.4) 1.027 (26.1) .957 (24.3) .125 (3.2) .250 (6.4) 4 08 .500 - 20 UNF .65 (16.5) 02 03 1 3.063 (77.8) 1.027 (26.1) .957 (24.3) .125 (3.2) .250 (6.4) 4 10 .625 - 24 UNEF .77 (19.6) 03 03 2 2.812 (71.4) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 12 .750 - 20 UNEF .40 (10.2) 04 03 2 3.812 (96.8) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 14 .875 - 20 UNEF 1.02 (25.9) 05 08 1 2.062 (52.4) 1.027 (26.1) .957 (24.3) .125 (3.2) .250 (6.4) 4 16 1.000 - 20 UNEF 1.21 (30.7) 06 08 1 3.062 (77.8) 1.027 (26.1) .957 (24.3) .125 (3.2) .250 (6.4) 4 18 1.062 - 18 UNEF 1.23 (31.2) 07 08 2 2.812 (71.4) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 08 2 3.812 (96.8) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 20 08 6 1.188 - 18 UNEF 1.36 (34.5) 09 10 1 2.062 (52.4) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 4 22 1.313 - 18 UNEF 1.48 (37.6) 10 10 1 3.062 (77.8) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 4 24 1.438 - 18 UNEF 1.73 (43.9) 11 10 2 2.812 (71.4) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 28 1.750 - 18 UNS 1.97 (50.0) 12 10 2 3.812 (96.8) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 13 12 1 2.062 (52.4) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 14 12 1 3.062 (77.8) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 6 15 12 2 2.812 (71.4) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 16 12 2 3.812 (96.8) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 17 14 1 2.062 (52.4) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .575 (14.6) 10 18 14 1 3.062 (77.8) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .575 (14.6) 10 19 14 2 2.812 (71.4) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 20 14 2 3.812 (96.8) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 21 16 1 2.062 (52.4) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .700 (17.8) 12 22 16 1 3.062 (77.8) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .700 (17.8) 12 23 16 2 2.812 (71.4) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 24 16 2 3.812 (96.8) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 25 18 1 2.062 (52.4) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 26 18 1 3.062 (77.8) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 27 18 1 2.062 (52.4) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 28 18 1 3.062 (77.8) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 29 18 2 2.812 (71.4) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 30 18 2 3.812 (96.8) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 31 20 1 3.062 (77.8) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 32 20 1 4.062 (103.2) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 33 20 1 3.062 (77.8) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 34 20 1 4.062 (103.2) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 35 20 2 3.812 (96.8) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 36 20 2 4.812 (122.2) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 37 20 2 3.812 (96.8) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 38 20 2 4.812 (122.2) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 39 22 1 3.062 (77.8) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 40 22 1 4.062 (103.2) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 41 22 1 3.062 (77.8) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 42 22 1 4.062 (103.2) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 43 22 1 3.062 (77.8) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 44 22 1 4.062 (103.2) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 45 22 2 3.812 (96.8) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 46 22 2 4.812 (122.2) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 47 24 1 3.062 (77.8) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 48 24 1 4.062 (103.2) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 49 24 1 3.062 (77.8) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .812 (20.6) 16 50 24 1 4.062 (103.2) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .812 (20.6) 16 51 24 1 3.062 (77.8) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 52 24 1 4.062 (103.2) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 32 2.000 - 18 UNS 2.22 (56.4) 36 2.250 - 16 UN 2.47 (62.7) 40 2.500 - 16 UN 2.72 (69.1) 44 2.750 - 16 UN 2.97 (75.4) 48 3.000 - 16 UN 3.22 (81.8) 61 1.500 - 18 UNEF 1.67 (42.4) Refer to the Mil-Spec for Complete Dimensions Cable Range Min Max M85049/42 Ref. Continued on Page B-49 (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-48 E-Mail: sales@glenair.com AS85049 AS85049/25 and MS3437C Straight EMI/RFI Non-Environmental Backshell TABLE II: Continued from Page B-48 Dash No. Shell Size E Max Style F Ref. L Max 53 24 54 24 55 Cable Range Min Max M85049/42 Ref. 2 3.812 (96.8) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 2 4.812 (122.2) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 28 1 3.062 (77.8) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 56 28 1 4.062 (103.2) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 57 28 1 3.062 (77.8) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 58 28 1 4.062 (103.2) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 59 28 1 3.062 (77.8) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 60 28 1 4.062 (103.2) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 61 28 1 3.062 (77.8) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 62 28 1 4.062 (103.2) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 63 32 1 3.062 (77.8) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 64 32 1 4.062 (103.2) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 65 32 1 3.062 (77.8) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 66 32 1 4.062 (103.2) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 67 32 1 3.062 (77.8) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 68 32 1 4.062 (103.2) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 69 32 1 3.062 (77.8) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 70 32 1 4.062 (103.2) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 71 36 1 4.062 (103.2) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 72 36 1 5.062 (128.6) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 73 36 1 4.062 (103.2) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 74 36 1 5.062 (128.6) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 75 36 1 4.062 (103.2) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 76 36 1 5.062 (128.6) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 77 36 2 4.942 (125.5) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 78 36 2 5.942 (150.9) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 79 40 1 4.062 (103.2) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 80 40 1 5.062 (128.6) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 81 40 1 4.062 (103.2) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 82 40 1 5.062 (128.6) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 83 40 1 4.062 (103.2) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 84 40 1 5.062 (128.6) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 85 40 1 4.062 (103.2) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 86 40 1 5.062 (128.6) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 87 44 1 4.062 (103.2) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 88 44 1 5.062 (128.6) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 89 44 1 4.062 (103.2) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 90 44 1 5.062 (128.6) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 91 44 1 4.062 (103.2) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 92 44 1 5.062 (128.6) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 93 44 1 4.062 (103.2) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 94 44 1 5.062 (128.6) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 95 48 1 4.062 (103.2) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 96 48 1 5.062 (128.6) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 97 48 1 4.062 (103.2) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 98 48 1 5.062 (128.6) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 99 48 1 4.062 (103.2) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 100 48 1 5.062 (128.6) 1.781 (45.2) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 101 48 1 4.062 (103.2) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 102 48 1 5.062 (128.6) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 103 61 1 3.062 (77.8) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 104 61 1 4.062 (103.2) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 B Continued on Page B-50 (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-49 E-Mail: sales@glenair.com AS85049 AS85049/25 and MS3437C Straight EMI/RFI Non-Environmental Backshell TABLE II: Continued from Page B-49 B (c) 2013 Glenair, Inc. Dash No. Shell Size E Max Style F Ref. L Max 105 61 106 61 107 Cable Range Min Max M85049/42 Ref. 1 3.062 (77.8) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 1 4.062 (103.2) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 61 2 3.812 (96.8) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 108 61 2 4.812 (122.2) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 20 109 61 2 3.812 (96.8) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 110 61 2 4.812 (122.2) 1.500 (38.1) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 111 12 1 2.062 (52.4) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .500 (12.7) 10 112 16 1 2.062 (52.4) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 06 113 16 1 3.062 (77.8) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 06 114 12 1 2.062 (52.4) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 04 115 12 1 3.062 (77.8) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 04 116 14 1 2.062 (52.4) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 06 117 14 1 3.062 (77.8) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 06 118 16 1 2.062 (52.4) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 119 16 1 3.062 (77.8) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 120 18 1 2.062 (52.4) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 04 121 18 1 3.062 (77.8) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 04 122 18 1 2.062 (52.4) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 06 123 18 1 3.062 (77.8) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 06 124 20 1 3.062 (77.8) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 06 125 20 1 4.062 (103.2) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 06 126 22 1 3.062 (77.8) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 04 127 22 1 4.062 (103.2) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 04 128 22 1 3.062 (77.8) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 0 129 22 1 4.062 (103.2) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .437 (11.1) 06 130 24 1 3.062 (77.8) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 131 24 1 4.062 (103.2) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .625 (15.9) 10 132 36 1 4.062 (103.2) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 133 36 1 5.062 (128.6) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 134 40 1 4.062 (103.2) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 135 40 1 5.062 (128.6) 1.059 (26.9) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 136 10 1 2.062 (52.4) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .375 (9.5) 06 137 10 1 3.062 (77.8) 1.027 (26.1) 1.145 (29.1) .250 (6.4) .375 (9.5) 06 138 12 1 2.062 (52.4) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .500 (12.7) 10 139 12 1 3.062 (77.8) 1.027 (26.1) 1.332 (33.8) .350 (8.9) .500 (12.7) 10 140 20 1 3.062 (77.8) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .904 (23.0) 16 141 20 1 4.062 (103.2) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .904 (23.0) 16 142 22 1 3.062 (77.8) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.029 (26.1) 20 143 22 1 4.062 (103.2) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.029 (26.1) 20 144 24 1 3.062 (77.8) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.144 (29.1) 20 145 24 1 4.062 (103.2) 1.375 (34.9) 2.113 (53.7) .875 (22.2) 1.144 (29.1) 20 146 36 1 4.062 (103.2) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.840 (46.7) 32 147 36 1 5.062 (128.6) 1.830 (46.5) 3.020 (76.7) 1.437 (36.5) 1.840 (46.7) 32 148 36 1 4.062 (103.2) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 149 36 1 5.062 (128.6) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 150 14 1 2.062 (52.4) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 04 151 14 1 3.062 (77.8) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 04 152 16 1 2.062 (52.4) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 04 153 16 1 3.062 (77.8) 1.027 (26.1) .957 (24.3) .125 (3.2) .312 (7.9) 04 154 44 1 4.062 (103.2) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 155 44 1 5.062 (128.6) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 156 40 1 4.062 (103.2) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 157 40 1 5.062 (128.6) 1.156 (29.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-50 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: A AS50151 Series AS34001 MIL-DTL-26482 Series II AS81703 Series III MIL-DTL-83723 Series I & III AS85049 AS85049/26-1 and MS3419 Straight Crimp Ring Backshell and Crimp Ring Superseded Part Number Basic Part Number M85049/26-1 = Adapter Only M85049/26-2 = Crimp Ring Only M85049/26-3 = Adapter with Crimp Ring (See Page B-52 for Crimp Ring) MS3419-21 C Shell Size (Table II) M85049/26-1 - 12 Basic Part No. W Finish N = Electroless Nickel W = 1,000 Hr. Cadmium Olive Drab over Electroless Nickel X = Aluminum, Nickel Fluorocarbon Polymer Z = Aluminum, Zinc-Nickel, Black Shell Size Finish (Material is Aluminum Only) A = Electroless Nickel C = 500 Hr. Cadmium Olive Drab over Electroless Nickel M85049/26-2 Crimp Ring (See Page B-52) TABLE I: Adapter Shell Size,Thread, and Dimensions Shell Size A Thread Class 2B 3 8 10 12 14 16 18 20 22 24 28 32 36 40 44 48 61 .562 - 24 UNEF .500 - 20 UNF .625 - 24 UNEF .750 - 20 UNEF .875 - 20 UNEF 1.000 - 20 UNEF 1.062 - 18 UNEF 1.188 - 18 UNEF 1.313 - 18 UNEF 1.438 - 18 UNEF 1.750 - 18 UNS 2.000 - 18 UNS 2.250 - 16 UN 2.500 - 16 UN 2.750 - 16 UN 3.000 - 16 UN 1.500 - 18 UNEF (c) 2013 Glenair, Inc. C Dia Max .670 .620 .730 .860 .980 1.110 1.220 1.350 1.470 1.590 1.970 2.220 2.470 2.720 2.970 3.220 1.650 (17.0) (15.7) (18.5) (21.8) (24.9) (28.2) (31.0) (34.3) (37.3) (40.4) (50.0) (56.4) (62.7) (69.1) (75.4) (81.8) (41.9) E Dia .250 .250 .325 .420 .540 .670 .789 .914 1.039 1.112 1.389 1.635 1.850 2.065 2.320 2.570 1.210 F Dia (6.4) (6.4) (8.3) (10.7) (13.7) (17.0) (20.0) (23.2) (26.4) (28.2) (35.3) (41.5) (47.0) (52.5) (58.9) (65.3) (30.7) .337 .337 .488 .500 .620 .750 .880 1.000 1.120 1.192 1.545 1.795 2.045 2.295 2.545 2.795 1.359 (8.6) (8.6) (12.4) (12.7) (15.7) (19.1) (22.4) (25.4) (28.4) (30.3) (39.2) (45.6) (51.9) (58.3) (64.6) (71.0) (34.5) APPLICATION NOTES 1. 2. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. See Page B-52 for AS85049/26-2 Crimp Ring Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-51 E-Mail: sales@glenair.com B AS85049 AS85049/26-2 Backshell Crimp Ring Product Series Basic Part Number M85049/26 - -2 - 10 B Dash No. (Table I) B A L TABLE I: Shell Size, Thread, Cable Entry and Dimensions Dash No. Color Code 8 10 12 14 16 18 20 22 24 28 32 36 40 44 48 61 GREEN RED RED BLUE GREY BROWN GREEN PINK ORANGE RED GREY GREEN ORANGE YELLOW BLUE PURPLE A Dia Min .400 .585 .585 .705 .835 1.005 1.125 1.245 1.327 1.665 1.915 2.165 2.415 2.665 2.915 1.435 (10.2) (14.9) (14.9) (17.9) (21.2) (25.5) (28.6) (31.6) (33.7) (42.3) (48.6) (55.0) (61.3) (67.7) (74.0) (36.4) B Dia Max .410 .595 .595 .715 .845 1.015 1.135 1.255 1.337 1.675 1.925 2.175 2.425 2.675 2.925 1.445 (10.4) (15.1) (15.1) (18.2) (21.5) (25.8) (28.8) (31.9) (34.0) (42.5) (48.9) (55.2) (61.6) (67.9) (74.3) (36.7) Min .448 .660 .660 .780 .910 1.080 1.200 1.320 1.402 1.740 1.990 2.240 2.490 2.740 2.990 1.510 (11.4) (16.8) (16.8) (19.8) (23.1) (27.4) (30.5) (33.5) (35.6) (44.2) (50.5) (56.9) (63.2) (69.6) (75.9) (38.4) L Dim .020 (0.5) Max .458 .680 .680 .800 .930 1.100 1.220 1.340 1.422 1.760 2.010 2.260 2.510 2.760 3.010 1.530 (11.6) (17.3) (17.3) (20.3) (23.6) (27.9) (31.0) (34.0) (36.1) (44.7) (51.4) (57.4) (63.8) (70.1) (76.5) (38.9) .250 .440 .440 .440 .440 .440 .440 .440 .440 .440 .440 .440 .440 .440 .440 .440 (6.4) (11.2) (11.2) (11.2) (11.2) (11.2) (11.2) (11.2) (11.2) (11.2) (11.2) (11.2) (11.2) (11.2) (11.2) (11.2) For Use with AS85049/26-1 For Use with AS85049/20 For Use with AS85049/33-2 -3 & -8 -10 -12 -14 -16 -18 -20 -22 -24 -28 -32 -36 -40 -44 -48 -61 -9 -11 -11 -15 -17 -19 -21 -23 -25 -8 -10 -10 -14 -16 -18 -20 -22 -24 Installing Die Cat. No. (See Note 2) GS405 GS590 GS590 GS710 GS840 GS1010 GS1130 GS1250 GS1332 GS1670 GS1920 GS2170 GS2420 GS2670 GS2920 GS1440 APPLICATION NOTES 1. Assembly identified with manufacturer's name and part number, space permitting. 2. Crimp tool shall be the Thomas and Betts Installing Head catalog number 13640 or equivalent (see Table I). 3. The installing dies (Thomas and Betts Cat. No.--See Table I) shall be used with the Thomas and Betts Installing head Catalog Number 13640 or an equivalent tool. 4. Material/Finish: Copper/Tin Plate. 5. Metric dimensions (mm) are in parentheses. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-52 E-Mail: sales@glenair.com Finish N = Electroless Nickel W = 1,000 Hour Cadmium Olive Drab over Electroless Nickel X = Nickel Fluorocarbon Polymer Y = Pure Dense Electrodeposited Aluminum Z = Zinc-Nickel, Black CONNECTOR DESIGNATOR: F AS85049 AS85049/27 and M38999/1 Self-Locking and Non-Self-Locking E-Nut MIL-DTL-27599, MIL-DTL-38999 Series I & II Basic Part Number M85049/27 N S = Self-Locking N = Non-Detented Use Dash for Non-Self-Locking F Self-Locking 08 10 12 14 16 18 20 22 24 .438 - 28 UNEF .562 - 24 UNEF .688 - 24 UNEF .813 - 20 UNEF .938 - 20 UNEF 1.063 - 18 UNEF 1.188 - 18 UNEF 1.313 - 18 UNEF 1.438 - 18 UNEF (c) 2013 Glenair, Inc. OE Max .274 .412 .526 .651 .776 .882 1.006 1.132 1.257 (7.0) (10.5) (13.4) (16.5) (19.7) (22.4) (25.6) (28.8) (31.9) Shell Size E TABLE I: Shell Size, Thread and Dimensions A Thread Class 2B B W G SelfLocking A Thread Shell Size 10 OF Max .859 .984 1.156 1.281 1.406 1.516 1.641 1.766 1.891 (21.8) (25.0) (29.4) (32.5) (35.7) (38.5) (41.7) (44.9) (48.0) APPLICATION NOTES G Max .590 .590 .590 .590 .590 .590 .590 .590 .590 (15.0) (15.0) (15.0) (15.0) (15.0) (15.0) (15.0) (15.0) (15.0) 1. For complete dimensions, see the applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-53 E-Mail: sales@glenair.com AS85049 AS85049/28 and M83733/15 Straight Rectangular Non-Environmental Backshell Basic Part Number Dash Number (Table II) TABLE I: Shell Size and Dimensions Superseded Part Number M83733/15 1 M85049/28 - 1 Basic Part No. Dash No. (Table II) B Dash Shell A Max No. Size Dim 1 A 2 A 3 B 4 B C 2.126 (54.0) 2.126 (54.0) 3.426 (87.0) 3.426 (87.0) B Dim C Cable Range (See Note 4) 1.900 (48.3) 1.890 (48.0) .625 (15.9) .500 (12.7) 1.900 (48.3) 1.890 (48.0) .750 (19.1) .625 (15.9) 3.200 (81.3) 3.190 (81.0) .625 (15.9) .500 (12.7) 3.200 (81.3) 3.190 (81.0) .750 (19.1) .625 (15.9) Metalastic Entry Gasket (See Note 3) 3.75 (95.3) Ref (See Note 1) (See Note 1) 2.02 (51.3) 1.98 (50.3) Metalastic Backshell Gasket (See Note 3) .172 (4.4) .121 (3.1) Monel Mesh Connector Shell Grounding Gasket (See Note 3) #4-40 Unc X .437 Long Screw With Lockwasher & Clearance Hole For Screw Thru Metalastic Gasket & Backshell 4 Each Required A B 1.031 (26.2) .969 (24.6) APPLICATION NOTES .100 (2.5) Ref .815 (20.7) .811 (20.6) .104 (2.6 ) .083 (2.1) 1. Assembly identified with manufacturer's name and part number, space permitting, location optional. 2. Glenair Series 600 Backshell Assembly Tools are recommended for assembly and installation. 3. Gasket may be ordered as a kit (Glenair G61659), shell size A or B. 4. Dash numbers 1 and 3 = Standard cable entry. Dash numbers 2 and 4 = Oversize cable entry. Material/finish: Backshell, adapter, clamp, ferrule - Al alloy/Electroless nickel. Screws and washers -CRES/Passivate Backshell and entry gaskets = Metalastic/N.A. Interface gasket - Monel mesh/N.A. 5. 6. (c) 2013 Glenair, Inc. Metric dimensions (mm) are indicated in parentheses Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 10-17-14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-54 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: F MIL-DTL-38999 Series I and II TABLE III: Length Code Code Length .032 (0.8) Standard 1.00 (25.4) A 2.00 (50.8) APPLICATION NOTES 1. 2. 3. B 3.00 (76.2) C 4.00 (101.6) Basic Part Number Shell Size M85049/29 10 AS85049 AS85049/29 (M38999/6) Straight Non-Environmental Strain Relief Backshell Clamp Size N Finish A = Black Anodize N = Electroless Nickel W = Cadmium, Olive Drab X = Nickel Fluorocarbon Polymer Y = Pure Dense Electrodeposited Aluminum Z = Zinc Nickel 03 A Length Code (Omit for Standard) Table III For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. TABLE I: Shell Size and Clamp Size Shell Size Series I Clamp Size* Ref. Min Max TABLE II: Clamp Size, Cable Range and Dimensions A Thread Class 2B 08 09 01 02 .438 - 28 UNEF 10 11 01 03 .562 - 24 UNEF 12 13 02 04 .688 - 24 UNEF 14 15 02 05 .813 - 20 UNEF 16 17 02 06 .938 - 20 UNEF 18 19 03 07 1.063 - 18 UNEF 20 21 03 08 1.188 - 18 UNEF 22 23 03 09 1.313 - 18 UNEF 24 25 04 10 1.438 - 18 UNEF Clamp Size *Clamp Size from Table II, AS85049/29 Specifications. (c) 2013 Glenair, Inc. Cable Range Min Max E Max 01 .062 (1.6) .125 (3.2) .781 (19.8) 02 .125 (3.2) .250 (6.4) .969 (24.6) 03 .250 (6.4) .375 (9.5) 1.062 (27.0) 04 .312 (7.9) .500 (12.7) 1.156 (29.4) 05 .437 (11.1) .625 (15.9) 1.250 (31.8) 06 .562 (14.3) .750 (19.1) 1.375 (34.9) 07 .687 (17.4) .875 (22.2) 1.500 (38.1) 08 .812 (20.6) 1.000 (25.4) 1.625 (41.3) 09 .937 (23.8) 1.125 (28.6) 1.750 (44.5) 10 1.062 (27.0) 1.250 (31.8) 1.875 (47.6) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-55 E-Mail: sales@glenair.com B AS85049 AS85049/30 and M38999/4 Straight TAG(R) Ring Backshell CONNECTOR DESIGNATOR: F Basic Part Number MIL-DTL-38999 Series I and II M38999/4 12 B M85049/30 - 10 B Superseded Part Number Shell Size (Table II) W Basic Part No. Finish Finish N = Electroless Nickel W = 1,000 Hr. Cadmium Olive Drab over Electroless Nickel X = Aluminum, Nickel Fluorocarbon Polymer Z = Aluminum, Zinc-Nickel, Black (Material is Aluminum Only) B = Cadmium Olive Drab over Nickel F = Electroless Nickel TABLE I: Clamp Size, Cable Range and Dimensions Shell Shell Size Size Series I Ref 08 10 12 14 16 18 20 22 24 9 11 13 15 17 19 21 23 25 (c) 2013 Glenair, Inc. A Thread Class 2B .438 - 28 UNEF .562 - 24 UNEF .688 - 24 UNEF .813 - 20 UNEF .938 - 20 UNEF 1.063 - 18 UNEF 1.188 - 18 UNEF 1.313 - 18 UNEF 1.438 - 18 UNEF C Dia Max .75 .85 1.00 1.10 1.25 1.40 1.50 1.65 1.75 E Cable Entry Max (19.1) .250 (6.4) (21.6) .375 (9.5) (25.4) .500 (12.7) (27.9) .625 (15.9) (31.8) .750 (19.1) (35.6) .844 (21.4) (38.1) .970 (24.6) (41.9) 1.094 (27.8) (44.5) 1.219 (31.0) APPLICATION NOTES F Dia Max .545 .670 .795 .920 1.045 1.170 1.295 1.420 1.670 Shell Size (13.8) (17.0) (20.2) (23.4) (26.5) (29.7) (32.9) (36.1) (42.4) 1. 2. 3. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Entry is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-56 E-Mail: sales@glenair.com AS85049 AS85049/31, MS3416 and MIL-DTL-85723/15N Self-Locking and Non-Self-Locking E-Nut Finish A = Anodize, Black N = Electroless Nickel W = 1,000 Hour Cadmium Olive Drab over Electroless Nickel X = Nickel Fluorocarbon Polymer Y = Pure Dense Electrodeposited Aluminum Z = Zinc-Nickel, Black CONNECTOR DESIGNATOR: A AS50151 Series AS34001 Crimp, MIL-DTL-26482 Series II, SAE AS81703 Crimp Series III, MIL-DTL-83723 Series I, MIL-DTL-83723 Series III A Thread Basic Part Number F Self-Locking G M85049/31 S 22 W Shell Size S = Self-Locking N = Non-Detented Use Dash for Non-Self-Locking E B Superseded Part Number MS3416 -10-E A Superseded Part Number Dash No. M83723/15N-10 A Basic Part No. (Non-SelfLocking Only) Dash No. Basic Part No. (Non-SelfLocking Only) Finish Designator A = Non-Conductive, Black Anodize R = Conductive, Electroless Nickel Metal and Finish Designator Style A = Aluminum 500 Hour Cad. Olive Drab Over Electroless Nickel C = Aluminum, Cadmium Olive Drab G = Aluminum, Black Anodize N = Aluminum, Electroless Nickel TABLE I: Shell Size, Thread and Dimensions APPLICATION NOTES 1. For complete dimensions, see the applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. (c) 2013 Glenair, Inc. Shell Size A Thread Class 2B 3 8 10 12 14 16 18 20 22 24 28 32 36 40 44 48 61 .562 - 24 UNEF .500 - 20 UNF .625 - 24 UNEF .750 - 20 UNEF .875 - 20 UNEF 1.000 - 20 UNEF 1.062 - 18 UNEF 1.188 - 18 UNEF 1.313 - 18 UNEF 1.438 - 18 UNEF 1.750 - 18 UNS 2.000 - 18 UNS 2.250 - 16 UN 2.500 - 16 UN 2.750 - 16 UN 3.000 - 16 UN 1.500 - 18 UNEF OE Max .270 .270 375 .511 .585 .710 .789 .914 1.039 1.154 1.389 1.635 1.850 2.065 2.320 2.570 1.194 F Max (6.9) (6.9) (9.5) (13.0) (14.9) (18.0) (20.0) (23.2) (26.4) (29.3) (35.3) (41.5) (47.0) (52.5) (58.9) (65.3) (30.3) Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 OG Max -.710 .710 .710 .710 .710 .710 .710 .710 .710 .890 .890 .890 .890 .890 .890 -(18.0) (18.0) (18.0) (18.0) (18.0) (18.0) (18.0) (18.0) (18.0) (22.6) (22.6) (22.6) (22.6) (22.6) (22.6) -- .885 1.010 1.135 1.260 1.385 1.510 1.635 1.760 1.885 2.135 2.395 2.635 2.885 3.135 3.385 (22.5) (25.7) (28.8) (32.0) (35.2) (38.4) (41.5) (44.7) (47.9) (54.2) (60.8) (66.9) (73.3) (79.6) (86.0) -- Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-57 E-Mail: sales@glenair.com AS85049 AS85049/33-2 Straight RFI/EMI Non-Environmental Backshell CONNECTOR DESIGNATOR: F Basic Part Number MIL-DTL-38999 Series I and II Shell Size (Table I) M85049/33-2 - 10 B W Finish N = Electroless Nickel W = 1,000 Hr. Cadmium Olive Drab over Electroless Nickel X = Aluminum, Nickel Fluorocarbon Polymer Z = Aluminum, Zinc-Nickel, Black M85049/26-2 Crimp Ring (See Table I and Page B-52) TABLE I: Adapter Shell Size,Thread, Dimensions and Crimp Ring Ref. Shell Size A Thread Class 2B 08 10 12 14 16 18 20 22 24 .438 - 28 UNEF .562 - 24 UNEF .688 - 24 UNEF .813 - 20 UNEF .938 - 20 UNEF 1.063 - 18 UNEF 1.188 - 18 UNEF 1.313 - 18 UNEF 1.438 - 18 UNEF (c) 2013 Glenair, Inc. C Dia Max .750 .850 1.000 1.100 1.250 1.400 1.500 1.650 1.750 E Dia (19.1) .250 (6.4) (21.6) .325 (8.3) (25.4) .420 (10.7) (27.9) .540 (13.7) (31.8) .670 (17.0) (35.6) .789 (20.0) (38.1) .914 (23.2) (41.9) 1.039 (26.4) (44.5) 1.112 (28.2) F Dia Max .347 .498 .510 .630 .760 .890 1.010 1.130 1.202 (8.8) (12.6) (13.0) (16.0) (19.3) (22.6) (25.7) (28.7) (30.5) AS85049/26-2 Crimp Ring Ref 8 10 12 14 16 18 20 22 24 APPLICATION NOTES 1. 2. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. See Page B-52 for AS85049/26-2 Crimp Ring Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-58 E-Mail: sales@glenair.com AS85049 AS85049/34 Straight Adapter and Extender for Use with MS3114 and MS3124 Connectors CONNECTOR DESIGNATOR: D Basic Part Number MIL-DTL-26482 Series I For Use With MS3114 and MS3124 Connectors Only Shell Size (Table I) M85049/34 - 12 W B Finish W = 1000 Hr. Cadmium Olive Drab X = Nickel Fluorocarbon Polymer Y = Pure Dense Electrodeposited Aluminum Z = Zinc Nickel, Black TABLE I: Shell Size and Dimensions D Dia E Dia F Max Shell Size G Thread UNEF Class 2A H Thread UNEF Class 2A 8 .4375 - 28 .625 - 24 .500 (12.7) .327 (8.3) .812 (20.6) 10 .5625 - 24 .750 - 20 .609 (15.5) .444 (11.3) .812 (20.6) 12 .6875 - 24 .875 - 20 .734 (18.6) .569 (14.5) .812 (20.6) 14 .8125 - 20 1.000 - 20 .859 (21.8) .673 (17.1) .812 (20.6) 16 .9375 - 20 1.125 - 18 .969 (24.6) .798 (20.3) .812 (20.6) 18 1.0625 - 18 1.250 - 18 1.109 (28.2) .915 (23.2) .812 (20.6) 20 1.1875 - 18 1.375 - 18 1.219 (31.0) 1.030 (26.2) .906 (23.0) 22 1.3125 - 18 1.500 - 18 1.344 (34.1) 1.155 (29.3) .906 (23.0) 24 1.4375 - 18 1.625 - 18 1.469 (37.3) 1.280 (32.5) .937 (23.8) (c) 2013 Glenair, Inc. APPLICATION NOTES 1. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. 2. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-59 E-Mail: sales@glenair.com AS85049 AS85049/36 and M38999/7 Straight EMI/RFI Non-Environmental Backshell CONNECTOR DESIGNATOR: F Finish N = Electroless Nickel X = Nickel Fluorocarbon Polymer W = 1,000 Hr. Cadmium Olive Drab Z = Zinc-Nickel, Black over Electroless Nickel MIL-DTL-38999 Series I and II M85049/36 B Basic Part Number 10 Shell Size (Table I) N 03 A Clamp Size (Table I) Length Code (Omit for Standard) Table III TABLE I: Shell Size and Clamp Size Shell Series I Size Shell Size Ref. 08 10 12 14 16 18 20 22 24 09 11 13 15 17 19 21 23 25 Clamp Size (Table II) Min Max 01 01 02 02 02 03 03 03 04 02 03 04 05 06 07 08 09 10 A Thread Class 2B .438 - 28 UNEF .562 - 24 UNEF .688 - 24 UNEF .813 - 20 UNEF .938 - 20 UNEF 1.063 - 18 UNEF 1.188 - 18 UNEF 1.313 - 18 UNEF 1.438 - 18 UNEF TABLE II: Cable Range and Dimensions B Dia Max .65 .77 .89 1.02 1.15 1.23 1.36 1.48 1.73 (16.5) (19.6) (22.6) (25.9) (29.2) (31.2) (34.5) (37.6) (43.9) Clamp Size 01 02 03 04 05 06 07 08 09 10 TABLE III: Length Code Length Code Std. A B C (c) 2013 Glenair, Inc. Available Shell Sizes 08 - 24 08 - 24 14 - 24 20 - 24 Cable Range Min Max .062 (1.6) .125 (3.2) .125 (3.2) .250 (6.4) .250 (6.4) .375 (9.5) .312 (7.9) .500 (12.7) .437 (11.1) .625 (15.9) .562 (14.3) .750 (19.1) .687 (17.4) .875 (22.2) .812 (20.6) 1.000 (25.4) .937 (23.8) 1.125 (28.6) 1.062 (27.0) 1.250 (31.8) E Max .781 .969 1.062 1.156 1.250 1.375 1.500 1.625 1.750 1.875 (19.8) (24.6) (27.0) (29.4) (31.8) (34.9) (38.1) (41.3) (44.5) (47.6) APPLICATION NOTES Length 1. 1.500 (38.1) 2.500 (63.5) 3.500 (88.9) 4.500 (114.3) 2. 3. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-60 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: F Finish N = Electroless Nickel X = Nickel Fluorocarbon Polymer W = 1,000 Hr. Cadmium Olive Drab Z = Zinc-Nickel, Black over Electroless Nickel MIL-DTL-38999 Series I and II M85049/37 TABLE I: Shell Size Shell Series I Size Shell Size Series II Ref. 08 10 12 14 16 18 20 22 24 Shell Size Series II 8 10 12 14 16 18 20 22 24 09 11 13 15 17 19 21 23 25 A Thread Class 2B .438 - 28 UNEF .562 - 24 UNEF .688 - 24 UNEF .813 - 20 UNEF .938 - 20 UNEF 1.063 - 18 UNEF 1.188 - 18 UNEF 1.313 - 18 UNEF 1.438 - 18 UNEF AS85049 AS85049/37 and M38999/8 90 EMI/RFI Non-Environmental Backshell C Dia Max .750 .850 1.000 1.100 1.250 1.400 1.500 1.650 1.750 Basic Part Number 10 Shell Size (Table I) W 03 Clamp Size (Table I) L D = 3 Drain Holes L = Encapsulating Hole (19.1) (21.6) (25.4) (27.9) (31.8) (35.6) (38.1) (41.9) (44.5) TABLE II: Clamp Size and Dimensions Series I E F Clamp Size Shell Size Max Max Min Max Ref. .720 (18.3) 2.50 (63.5) 01 02 09 11 .720 (18.3) 2.50 (63.5) 01 03 13 .800 (20.3) 2.56 (65.0) 02 04 15 .850 (21.6) 2.69 (68.3) 02 05 17 .910 (23.1) 2.81 (71.4) 02 06 19 1.000 (25.4) 3.03 (77.0) 03 06 21 1.050 (26.7) 3.19 (81.0) 03 07 23 1.100 (27.9) 3.31 (84.1) 03 08 25 1.200 (30.5) 3.31 (84.1) 04 09 TABLE II: Clamp Size and Dimensions Clamp Size 01 02 03 04 05 06 07 08 09 Cable Range Min Max .062 (1.6) .125 (3.2) .125 (3.2) .250 (6.4) .250 (6.4) .375 (9.5) .312 (7.9) .500 (12.7) .437 (11.1) .625 (15.9) .562 (14.3) .750 (19.1) .687 (17.4) .875 (22.2) .812 (20.6) 1.000 (25.4) .937 (23.8) 1.125 (28.6) (c) 2013 Glenair, Inc. G Max .781 .969 1.062 1.156 1.250 1.375 1.500 1.625 1.750 (19.8) (24.6) (27.0) (29.4) (31.8) (34.9) (38.1) (41.3) (44.5) APPLICATION NOTES 1. 2. 3. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 05.29.15 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-61 E-Mail: sales@glenair.com B AS85049 AS85049/38 Straight Strain Relief Self-Locking or Non-Self-Locking CONNECTOR DESIGNATOR: H B Basic Part Number MIL-DTL-38999 Series III & IV EN3645 M85049/38 FOR NEW DESIGN USE AS85049/124 Shell Size S 11 Material and Finish Designator A = Aluminum, Black Anodize N = Aluminum, Electroless Nickel S = 300 Series Steel, Passivated W = Aluminum, 500 Hour Cadmium Olive Drab over Electroless Nickel S = Self-Locking Use Dash for Non-Self-Locking N = Non-Detented A Thread Cable Entry F Self-Locking Only E Self-Locking Only W H Note: Screw orientation shown is for non-self-locking configuration. Screws on self-locking configurations are on the same side/face of the clamp. TABLE I: Shell Size, Cable Entry and Backshell Dimensions Shell Size 9 11 13 15 17 19 21 23 25 Shell Size Ref. A B C D E F G H J A Thread Class 2B M12 X 1 - 6H M15 X 1 - 6H M18 X 1 - 6H M22 X 1 - 6H M25 X 1 - 6H M28 X 1 - 6H M31 X 1 - 6H M34 X 1 - 6H M37 X 1 - 6H O E Max F Max Self-Locking Only Self-Locking Only .858 (21.8) .91 (23.1) .984 (25.0) .91 (23.1) 1.157 (29.4) 1.01 (25.7) 1.279 (32.5) 1.06 (26.9) 1.406 (35.7) 1.16 (29.5) 1.516 (38.5) 1.41 (35.8) 1.642 (41.7) 1.51 (38.4) 1.768 (44.9) 1.66 (42.2) 1.889 (48.0) 2.76 (44.7) H Max .85 (21.6) .90 (22.9) 1.10 (27.9) 1.15 (29.2) 1.30 (33.0) 1.50 (38.1) 1.60 (40.6) 1.70 (43.2) 1.80 (45.7) Cable Entry Min Max .098 (2.5) .234 (5.9) .153 (3.9) .234 (5.9) .190 (4.8) .328 (8.3) .260 (6.6) .457 (11.6) .283 (7.2) .614 (15.6) .325 (8.3) .634 (16.1) .343 (8.7) .698 (17.7) .381 (9.7) .823 (20.9) .418 (10.6) .853 (21.7) APPLICATION NOTES 1. Assembly to be identified with manufacturer's name and part number, space permitting. 2. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 3. For complete dimensions, see the applicable Military Specification. 4. Metric dimensions (mm) are in parentheses. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-62 E-Mail: sales@glenair.com AS85049 AS85049/39 90 Strain Relief Self-Locking or Non-Self-Locking CONNECTOR DESIGNATOR: H Basic Part Number MIL-DTL-38999 Series III & IV EN3645 M85049/39 FOR NEW DESIGN USE AS85049/126 Shell Size S 11 W Material and Finish Designator A = Aluminum, Black Anodize N = Aluminum, Electroless Nickel S = 300 Series Steel, Passivated W = Aluminum, 500 Hour Cadmium Olive Drab over Electroless Nickel S = Self-Locking Use Dash for Non-Self-Locking N = Non-Detented F A Thread E Self Locking Only G G Cable Entry H TABLE I: Shell Size, Cable Entry and Backshell Dimensions Shell Size 9 11 13 15 17 19 21 23 25 Shell Size Ref. A B C D E F G H J A Thread Class 2B M12 X 1 - 6H M15 X 1 - 6H M18 X 1 - 6H M22 X 1 - 6H M25 X 1 - 6H M28 X 1 - 6H M31 X 1 - 6H M34 X 1 - 6H M37 X 1 - 6H O E Max Self-Locking Only .858 (21.8) .984 (25.0) 1.157 (29.4) 1.279 (32.5) 1.406 (35.7) 1.516 (38.5) 1.642 (41.7) 1.768 (44.9) 1.889 (48.0) F Max 1.01 (25.7) 1.01 (25.7) 1.21 (30.7) 1.26 (32.0) 1.41 (35.8) 1.51 (38.4) 1.66 (42.2) 1.76 (44.7) 2.91 (73.9) G Max 1.00 (25.4) 1.10 (27.9) 1.10 (27.9) 1.25 (31.8) 1.30 (33.0) 1.35 (34.3) 1.60 (40.6) 1.75 (44.5) 1.85 (47.0) H Max .85 (21.6) .90 (22.9) 1.10 (27.9) 1.15 (29.2) 1.30 (33.0) 1.50 (38.1) 1.60 (40.6) 1.70 (43.2) 1.80 (45.7) Cable Entry Min Max .098 (2.5) .234 (5.9) .153 (3.9) .234 (5.9) .190 (4.8) .328 (8.3) .260 (6.6) .457 (11.6) .283 (7.2) .614 (15.6) .325 (8.3) .634 (16.1) .343 (8.7) .698 (17.7) .381 (9.7) .823 (20.9) .418 (10.6) .853 (21.7) APPLICATION NOTES 1. Assembly to be identified with manufacturer's name and part number, space permitting. 2. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 3. For complete dimensions, see the applicable Military Specification. 4. Metric dimensions (mm) are in parentheses. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-63 E-Mail: sales@glenair.com B AS85049 AS85049/41 and MS3057A Straight Non-Self-Locking Strain Relief for Use with MS "V" Thread General Duty "A" End Bell Basic Part Number Dash No. M85049/41 - 3A B G D Superseded Part Number Cable Entry MS3057-16A A Thread Basic Part No. E Dash No. F TABLE I: Shell Size, Cable Entry and Backshell Dimensions Dash No. 3A 4A 6A 8A 10A 12A 16A 20A 24A 28A 32A 40A Conn. Shell Ref.(s) 8S, 10S 10SL, 12S, 12 14S, 14 16S, 16 18 20, 22 24, 28 32 36 40 44 48 A Thread Class 2B 1/2 - 28 UNEF 5/8 - 24 UNEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1 - 20 UNEF 1 3/16 - 18 UNEF 1 7/16 - 18 UNEF 1 3/4 - 18 UNS 2 - 18 UNS 2 1/4 - 16 UN 2 1/2 - 16 UN 3 - 16 UN Cable Entry Max .250 (6.4) .312 (7.9) .438 (11.1) .562 (14.3) .625 (15.9) .750 (19.1) .938 (23.8) 1.250 (31.8) 1.375 (34.9) 1.625 (41.3) 1.875 (47.6) 2.375 (60.3) D Ref. .406 (10.3) .406 (10.3) .406 (10.3) .406 (10.3) .406 (10.3) .406 (10.3) .406 (10.3) .469 (11.9) .531 (13.5) .531 (13.5) .594 (15.1) .656 (16.7) OE .031 (0.8) .688 (17.5) .812 (20.6) .969 (24.6) 1.094 (27.8) 1.188 (30.2) 1.375 (34.9) 1.656 (42.1) 2.031 (51.6) 2.219 (56.4) 2.500 (63.5) 2.781 (70.6) 3.281 (83.3) .031 .812 .875 1.062 1.156 1.250 1.469 1.688 2.031 2.281 2.688 2.938 3.500 F (0.8) (20.6) (22.2) (27.0) (29.4) (31.8) (37.3) (42.9) (51.6) (57.9) (68.3) (74.6) (88.9) .031 .812 .812 .875 .938 .938 .938 1.031 1.094 1.156 1.688 1.750 1.750 G (0.8) (20.6) (20.6) (22.2) (23.8) (23.8) (23.8) (26.2) (27.8) (29.4) (42.9) (44.5) (44.5) APPLICATION NOTES 1. Finish on M85049/41 is Cadmium Olive Drab over Electroless Nickel, 1,000 hour salt spray. 2. Assembly to be identified with manufacturer's name and part number, space permitting. 3. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 4. For complete dimensions, see the applicable Military Specification. 5. Metric dimensions (mm) are in parentheses. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-64 E-Mail: sales@glenair.com AS85049 AS85049/42 and MS3057D Straight Non-Self-Locking Strain Relief for Use with MS "V" Thread General Duty "A" End Bell Basic Part Number Dash No. M85049/42 - 10D W Superseded Part Number Material/Finish N = Aluminum/Electroless Nickel W = Aluminum/1,000 Hour Cadmium over Electroless Nickel X = Aluminum/Nickel Fluorocarbon Polymer Y = Aluminum/Pure Dense Electrodeposited Aluminum Z = Aluminum/Zinc Nickel Black B = Stainless Steel/Cadmium Black S = Stainless Steel/Passivated XS = Stainless Steel/Nickel Fluorocarbon Polymer YS = Stainless SteelPure Dense Electrodeposited Aluminum ZS = Stainless Steel/Zinc Nickel Black MS3057 -10D A Basic Part No. Dash No. Metal and Finish Designator A = Aluminum Cadmium Olive Drab over Electroless Nickel C = Aluminum, Cadmium Olive Drab N = Aluminum, Electroless Nickel D = 300 Series Steel, Cadmium Black Plate S = 300 Series Steel, Passivate G E Thread Cable Entry F Stainless Steel Clamp Saddle Configuration H Telescoping Screws TABLE I: Shell Size, Cable Entry and Backshell Dimensions Dash No. 4D 6D 8D 10D 12D 16D 20D 24D 28D 32D E Thread Class 2B 5/8 - 24 UNEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1 - 20 UNEF 1 3/16 - 18 UNEF 1 7/16 - 18 UNEF 1 3/4 - 18 UNS 2 - 18 UNS 2 1/4 - 16 UN 2 1/2 - 16 UN OF Max .937 (23.8) 1.031 (26.2) 1.250 (31.8) 1.250 (31.8) 1.437 (36.5) 1.688 (42.9) 2.000 (50.8) 2.250 (57.2) 2.500 (63.5) 2.750 (69.9) OG .020 (.5) 1.281 (32.5) 1.281 (32.5) 1.281 (32.5) 1.281 (32.5) 1.312 (33.3) 1.406 (35.7) 1.563 (39.7) 1.625 (41.3) 1.900 (48.3) 1.900 (48.3) .020 .937 1.125 1.312 1.312 1.531 1.750 2.093 2.343 2.750 3.000 H (.5) (23.8) (28.6) (33.3) (33.3) (38.9) (44.5) (53.2) (59.5) (69.9) (76.2) Max .312 .437 .562 .625 .750 .937 1.250 1.375 1.625 1.875 Cable Entry (7.9) (11.1) (14.3) (15.9) (19.1) (23.8) (31.8) (34.9) (41.3) (47.6) Min .125 (3.2) .250 (6.4) .312 (7.9) .350 (8.9) .500 (12.7) .625 (15.9) .875 (22.2) 1.000 (25.4) 1.250 (31.8) 1.437 (36.5) APPLICATION NOTES (c) 2013 Glenair, Inc. 1. Assembly to be identified with manufacturer's name and part number, space permitting. 2. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 3. For complete dimensions, see the applicable Military Specification. 4. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-65 E-Mail: sales@glenair.com B AS85049 AS85049/43 and MS3415 Strain Relief 45 Self-Locking or Non-Self-Locking CONNECTOR DESIGNATOR: A B Basic Part Number AS5015 Series AS34001 Crimp, MIL-DTL-26482 Series II, AS81703 Crimp Series III, MIL-DTL-83723 Series I & III M85049/43 Dash No. S 10 E A Thread S = Self-Locking Use Dash for Non-Self-Locking N = Non-Detented C W Finish A = Anodize, Black N = Electroless Nickel W = 1,000 Hour Cadmium Olive Drab over Electroless Nickel X = Nickel Fluorocarbon Polymer Y = Pure Dense Electrodeposited Aluminum Z = Zinc-Nickel, Black F Cable Entry TABLE I: Shell Size, Cable Entry and Backshell Dimensions Dash A Thread No. Class 2B 3* .562 - 24 UNEF 8 .500 - 20 UNF 10 .625 - 24 UNEF 12 .750 - 20 UNEF 14 .875 - 20 UNEF 16 1.000 - 20 UNEF 18 1.062 - 18 UNEF 20 1.188 - 18 UNEF 22 1.313 - 18 UNEF 24 1.438 - 18 UNEF 28 1.750 - 18 UNS 32 2.000 - 18 UNS 36 2.250 - 16 UN 40 2.500 - 16 UN 44 2.750 - 16 UN 48 3.000 - 16 UN 61* 1.500 - 18 UNEF * See Note 5 1. 2. 3. 4. 5. (c) 2013 Glenair, Inc. C Max .669 (17.0) .885 (22.5) 1.010 (25.7)) 1.135 (28.8) 1.260 (32.0) 1.385 (35.2) 1.570 (39.9) 1.635 (41.5) 1.760 (44.7) 1.885 (47.9) 2.135 (54.2) 2.315 (58.8) 2.635 (66.9) 2.885 (73.3) 3.135 (79.6) 3.385 (86.0) 1.653 (41.5) E Closed 1.160 (29.5) 1.650 (29.5) 1.694 (30.6) 1.768 (32.5) 1.840 (33.5) 1.916 (36.2) 2.034 (39.2) 2.078 (40.3) 2.122 (41.5) 2.166 (42.6) 2.461 (45.7) 2.549 (48.0) 2.595 (49.1) 2.599 (49.1) 2.860 (55.9) 2.918 (58.1) 1.676 (42.6) F Max .772 (19.6) .772 (19.6) .803 (20.4) .866 (22.0) .928 (23.6) .991 (25.2) 1.110 (28.2) 1.172 (29.8) 1.235 (31.4) 1.297 (32.9) 1.543 (39.2) 1.668 (42.4) 1.793 (45.5) 1.918 (48.7) 2.132 (54.2) 2.257 (57.3) 1.204 (30.6) Min .125 .125 .187 .291 .351 .501 .518 .581 .644 .706 .750 .875 .938 .938 1.188 1.312 .706 Cable Entry (3.2) (3.2) (4.7) (7.4) (8.9) (12.7) (13.2) (14.8) (16.4) (17.9) (19.1) (22.2) (23.8) (23.8) (30.2) (33.3) (17.9) Max .204 (5.2) .204 (5.2) .286 (7.3) .416 (10.6) .476 (12.1) .625 (15.9) .706 (17.9) .831 (21.1) .956 (24.3) 1.081 (27.5) 1.187 (30.1) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.750 (44.5) 1.875 (47.6) 1.081 (27.5) APPLICATION NOTES Assembly to be identified with manufacturer's name and part number, space permitting. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. For complete dimensions, see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Non-Self-Locking only. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-66 E-Mail: sales@glenair.com Basic Part Number AS85049 AS85049/44 and M83733/16 Straight Non-Self-Locking Strain Relief Superseded Part Number Dash No. M83733/16-16 M85049/44 - 3 Basic Part No. Dash No. B APPLICATION NOTES 1. E Assembly to be identified with manufacturer's name and part number, space permitting. O.080 (2.0) +.012 (0.3) -.000 (0.0) PTFE Jacketed Coating 2. Maximum dimension with halves bottomed. 3. For complete dimensions, see the applicable Military Specification. 4. Metric dimensions (mm) are in parentheses. 5. Material/Finish: Frame and saddles - Aluminum alloy/Electroless nickel Hardware - CRES/Passivated Saddle cushion - Silicone/N/A 1.50 (38.1) .02 (0.5) .25 (6.4) .02 (0.5) O.047 (1.2) +.010 (0.3) -.000 (0.0) Wire Rope .312 (7.9) .02 (0.5) O.187/.178 (4.7/4.5) .112-40 UNC-2A X .437 (11.1) Long Screw With Lockwasher (4 Places) A B C D .818 (20.8) Max See Note 2 1.03 (26.2) Max See Note 2 O.116 (2.9) Hole (4 Places) Marking Location Optional .062 (1.6) Thick Silicone Cushion TABLE I: Dash Number, Shell Size and Dimensions Dash No. Shell Size A Dim .062 (1.6) B Dim .005 (0.1) C Dim .032 (0.8) D Dim .062 (1.6) E Dim .062 (1.6) 1 2 3 4 A B A B 2.437 (61.9) 3.750 (95.3) 2.437 (61.9) 3.750 (95.3) 1.895 (48.1) 3.195 (81.2) 1.895 (48.1) 3.195 (81.2) .271 (6.9) .277 (7.0) .271 (6.9) .277 (7.0) 1.70 (43.2) 3.00 (76.2) 1.70 (43.2) 3.00 (76.2) N/A N/A 10.375 (263.5) 10.375 (263.5) (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Lanyard Without With Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-67 E-Mail: sales@glenair.com AS85049 AS85049/45 and MS27663-1 Straight Composite Non-Self-Locking Strain Relief CONNECTOR DESIGNATOR: F Basic Part Number MIL-DTL-38999 Series I and II M85049/45 B Superseded Part Number Dash No. W MS27663-1 10 Basic Part No. Dash No. Finish A = Anodize, Black W = 1,000 Hour Cadmium Olive Drab over Electroless Nickel X = Nickel Fluorocarbon Polymer Y = Pure Dense Electrodeposited Aluminum Z = Zinc-Nickel, Black E A Thread Cable Entry F C Thermoplastic Body Aluminum Nut TABLE I: Shell Size, Cable Entry and Backshell Dimensions Dash No. 8 10 12 14 16 18 20 22 24 Shell Size Ref. 8/9 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 A Thread Class 2B .438 - 28 UNEF .562 - 24 UNEF .688 - 24 UNEF .813 - 20 UNEF .938 - 20 UNEF 1.063 - 18 UNEF 1.188 - 18 UNEF 1.313 - 18 UNEF 1.438 - 18 UNEF OC Max .578 (14.7) .703 (17.9) .828 (21.0) .953 (24.2) 1.078 (27.4) 1.203 (30.6) 1.328 (33.7) 1.453 (36.9) 1.578 (40.1) E Max 1.344 (34.1) 1.344 (34.1) 1.344 (34.1) 1.344 (34.1) 1.344 (34.1) 1.344 (34.1) 1.422 (36.1) 1.422 (36.1) 1.422 (36.1) F Max .422 (10.7) .422 (10.7) .422 (10.7) .422 (10.7) .422 (10.7) .422 (10.7) .422 (10.7) .422 (10.7) .344 (8.7) Cable Entry Min Max .094 (2.4) .203 (5.2) .141 (3.6) .250 (6.4) .172 (4.4) .323 (8.2) .203 (5.2) .422 (10.7) .234 (5.9) .500 (12.7) .265 (6.7) .562 (14.3) .297 (7.5) .625 (15.9) .328 (8.3) .703 (17.9) .359 (9.1) .765 (19.4) APPLICATION NOTES 1. Assembly to be identified with manufacturer's name and part number, space permitting. 2. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 3. For complete dimensions, see the applicable Military Specification. 4. Metric dimensions (mm) are in parentheses. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-68 E-Mail: sales@glenair.com Basic Part Number CONNECTOR DESIGNATOR: F AS85049 AS85049/46 and MS27663-2 90 Non-Self-Locking Composite Strain Relief MIL-DTL-38999 Series I and II Dash No. M85049/46 W 10 E A Thread Finish A = Anodize, Black W = 1,000 Hour Cadmium Olive Drab over Electroless Nickel X = Nickel Fluorocarbon Polymer Y = Pure Dense Electrodeposited Aluminum Z = Zinc-Nickel, Black Thermoplastic Body C F Aluminum Nut Superseded Part Number MS27663-2 Cable Entry Basic Part No. Dash No. TABLE I: Shell Size, Cable Entry and Backshell Dimensions Dash No. 8 10 12 14 16 18 20 22 24 Shell Size Ref. 8/9 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 A Thread Class 2B .438 - 28 UNEF .562 - 24 UNEF .688 - 24 UNEF .813 - 20 UNEF .938 - 20 UNEF 1.063 - 18 UNEF 1.188 - 18 UNEF 1.313 - 18 UNEF 1.438 - 18 UNEF OC Max .578 (14.7) .703 (17.9) .828 (21.0) .953 (24.2) 1.078 (27.4) 1.203 (30.6) 1.328 (33.7) 1.453 (36.9) 1.578 (40.1) E Max .656 (16.7) .688 (17.5) .750 (19.1) .859 (21.8) .937 (23.8) 1.000 (25.4) 1.062 (27.0) 1.141 (29.0) 1.203 (30.6) F Max 1.015 (25.8) 1.062 (27.0) 1.125 (28.6) 1.328 (33.7) 1.392 (35.4) 1.453 (36.9) 1.609 (40.9) 1.656 (42.1) 1.719 (43.7) Cable Entry Min Max .094 (2.4) .203 (5.2) .141 (3.6) .250 (6.4) .172 (4.4) .323 (8.2) .203 (5.2) .422 (10.7) .234 (5.9) .500 (12.7) .265 (6.7) .562 (14.3) .297 (7.5) .625 (15.9) .328 (8.3) .703 (17.9) .359 (9.1) .765 (19.4) APPLICATION NOTES (c) 2013 Glenair, Inc. 1. Assembly to be identified with manufacturer's name and part number, space permitting. 2. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 3. For complete dimensions, see the applicable Military Specification. 4. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-69 E-Mail: sales@glenair.com B AS85049 AS85049/47 and MS27507 90 Strain Relief Self-Locking or Non-Self-Locking Material and Finish Designator N = Aluminum, Electroless Nickel S = 300 Series Steel, Passivated W = Aluminum, 1000 Hour Cadmium Olive Drab over Electroless Nickel CONNECTOR DESIGNATOR: F MIL-DTL-38999 Series I and II FOR NEW DESIGN USE AS85049/123 B Basic Part Number M85049/47 S W 10 Dash No. S = Self-Locking Omit for Non-Self-Locking N = Non-Detented, Self-Locking Superseded Part Number MS27507-B 10 Basic Part No. (Non-SelfLocking) Dash No. Metal and Finish Designator A = Aluminum Cadmium Olive Drab over Electroless Nickel C = Aluminum, Cadmium Olive Drab N = Aluminum, Electroless Nickel D = 300 Series Steel, Cadmium Black Plate S = 300 Series Steel, Passivate APPLICATION NOTES F A Thread 1. E Self-Locking Only 2. G 3. 4. 5. Cable Entry H Assembly to be identified with manufacturer's name and part number, space permitting. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. For complete dimensions, see the applicable Military Specification. Metric dimensions (mm) are in parentheses. TABLE I: Shell Size, Cable Entry and Backshell Dimensions Dash No. 8 10 12 14 16 18 20 22 24 Shell Size Ref. 8/9 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 (c) 2013 Glenair, Inc. A Thread Class 2B .438 - 28 UNEF .562 - 24 UNEF .688 - 24 UNEF .813 - 20 UNEF .938 - 20 UNEF 1.063 - 18 UNEF 1.188 - 18 UNEF 1.313 - 18 UNEF 1.438 - 18 UNEF OE Max .86 (21.8) .98 (24.9) 1.16 (29.5) 1.28 (32.5) 1.41 (35.8) 1.52 (38.6) 1.64 (41.7) 1.77 (45.0) 1.89 (48.0) F Max 1.38 (35.1) 1.38 (35.1) 1.46 (37.1) 1.63 (41.4) 1.80 (45.7) 1.82 (46.2) 1.90 (48.3) 2.04 (51.8) 2.15 (54.6) G Max 1.00 (25.4) 1.10 (27.9) 1.10 (27.9) 1.25 (31.8) 1.30 (33.0) 1.35 (34.3) 1.60 (40.6) 1.75 (44.5) 1.85 (47.0) H Max .85 (21.6) .90 (22.9) 1.10 (27.9) 1.15 (29.2) 1.30 (33.0) 1.50 (38.1) 1.60 (40.6) 1.70 (43.2) 1.80 (45.7) .098 .153 .190 .260 .283 .325 .343 .381 .418 Dimensions in inches (millimeters) and are subject to change without notice. Rev. 10-23-14 Mil-Spec Backshells U.S. CAGE Code 06324 Min Cable Entry (2.5) (3.9) (4.8) (6.6) (7.2) (8.3) (8.7) (9.7) (10.6) .234 .234 .328 .457 .614 .634 .698 .823 .853 Max (5.9) (5.9) (8.3) (11.6) (15.6) (16.1) (17.7) (20.9) (21.7) Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-70 E-Mail: sales@glenair.com AS85049 AS85049/48-1 Rectangular Backshells MIL-DTL-24308 Dash Number Basic Part Number M85049/48 - 1 - 3 F B Finish F = Yellow Chromate over Cadmium TABLE I: Dash Number and Backshell Dimensions Dash No. 1 2 3 4 5 A .015 (0.4) 1.203 (30.6) 1.531 (38.9) 2.078 (52.8) 2.718 (69.0) 2.625 (66.7) (c) 2013 Glenair, Inc. C E F .005 (.13) .015 (0.4) .015 (0.4) .984 (25.0) .375 (9.5) .375 (9.5) 1.312 (33.3) .713 (18.1) .312 (7.9) 1.852 (47.0) 1 .000 (25.4) .312 (7.9) 2.500 (63.5) 1 .375 (34.9) .312 (7.9) 2.406 (61.1) 1 .406 (35.7) .406 (10.3) G .015 (0.4) .750 (19.1) .750 (19.1) 1.000 (25.4) 1.000 (25.4) 1.125 (28.6) H Max 1.250 (31.8) 1.250 (31.8) 1.563 (39.7) 1.563 (39.7) 1.688 (42.9) APPLICATION NOTES 1. Assembly identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-71 E-Mail: sales@glenair.com AS85049 AS85049/48-2 Rectangular Backshells MIL-DTL-24308 Dash Number Basic Part Number M85049/48 - 2 - 3 B F Finish F = Yellow Chromate over Cadmium APPLICATION NOTES 1. Assembly identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Metric dimensions (mm) are in parentheses. TABLE I: Dash Number and Backshell Dimensions Dash No. 1 2 3 4 5 (c) 2013 Glenair, Inc. Nonmagnetic (Brass) 6 7 8 9 10 A .015 (0.4) 1.208 (30.7) 1.531 (38.9) 2.078 (52.8) 2.718 (69.0) 2.625 (66.7) C .005 (.13) .984 (25.0) 1.312 (33.3) 1.852 (47.0) 2.500 (63.5) 2.406 (61.1) D .406 (10.3) .406 (10.3) .593 (15.1) .718 (18.2) .812 (20.6) E .015 (0.4) .661 ( 16.8) .984 ( 25.0) 1.515 (38.5) 2.171 (55.1) 2.093 (53.2) G .030 (0.8) 1.031 (26.2) 1.031 (26.2) 1.062 ( 27.0) 1.062 ( 27.0) 1.062 (27.0) Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 H .015 (0.4) .344 ( 8.7) .344 ( 8.7) .344 ( 8.7) .344 ( 8.7) .438 (11.1) Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-72 E-Mail: sales@glenair.com AS85049 AS85049/48-3 Rectangular Backshell MIL-DTL-24308 Dash Number Basic Part Number M85049/48 - 3 - 3 F B Finish F = Yellow Chromate over Cadmium APPLICATION NOTES TABLE I: Dash Number and Backshell Dimensions Dash No. of A No. Screws .015 (0.4) 2 2 .531 (38.9) 1 3 2 .078 (52.8) 2 4 3 .718 (69.0) 2 5 3 .625 (66.7) 2 (c) 2013 Glenair, Inc. B .015 (0.4) .500 (12.7) .500 (12.7) .500 (12.7) .609 (15.5) C .005 (0.1) 1.312 (33.3) 1.852 (47.0) 2.500 (63.5) 2.406 (61.1) F Max .679 (17.2) .679 (17.2) .679 (17.2) .724 (18.4) G .015 (0.4) 1.091 (27.7) 1.631 (41.4) 2.282 (58.0) 2.205 (56.0) H .015 (0.4) .442 (11.2) .442 (11.2) .442 (11.2) .565 (14.4) 1. Assembly identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-73 E-Mail: sales@glenair.com AS85049 AS85049/49-2 and MS27506 Straight Strain Relief Self-Locking or Non-Self-Locking CONNECTOR DESIGNATOR: F B Basic Part Number MIL-DTL-27599, MIL-DTL-38999 Series I & II FOR NEW DESIGN USE AS85049/121 A Thread E Self-Locking Only M85049/49-2 Dash No. S 10 S = Self-Locking Use Dash for Non-Self-Locking N = Non-Detented W Material and Finish Designator A = Aluminum, Black Anodize N = Aluminum, Electroless Nickel S = 300 Series Steel, Passivated W = Aluminum, 1000 Hour Cadmium Olive Drab over Electroless Nickel Cable Entry F Self-Locking Only Note: Screw orientation shown is for non-self-locking configuration. Screws on self-locking configurations are on the same side/face of the clamp. H TABLE I: Shell Size, Cable Entry and Backshell Dimensions Shell Size 8 10 12 14 16 18 20 22 24 Shell Size Ref. 8/9 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 A Thread O E Max F Max Class 2B Self-Locking Only Self-Locking Only .438 - 28 UNEF .86 (21.8) .91 (23.1) .562 - 24 UNEF .98 (24.9) .91 (23.1) .688 - 24 UNEF 1.16 (29.5) 1.01 (25.7) .813 - 20 UNEF 1.28 (32.5) 1.06 (26.9) .938 - 20 UNEF 1.41 (35.8) 1.16 (29.5) 1.063 - 18 UNEF 1.52 (38.6) 1.41 (35.8) 1.188 - 18 UNEF 1.64 (41.7) 1.51 (38.4) 1.313 - 18 UNEF 1.77 (45.0) 1.66 (42.2) 1.438 - 18 UNEF 1.89 (48.0) 1.76 (44.7) H Max .85 (21.6) .90 (22.9) 1.10 (27.9) 1.15 (29.2) 1.30 (33.0) 1.50 (38.1) 1.60 (40.6) 1.70 (43.2) 1.80 (45.7) .098 .153 .190 .260 .283 .325 .343 .381 .418 Min Cable Entry (2.5) (3.9) (4.8) (6.6) (7.2) (8.3) (8.7) (9.7) (10.6) .234 .234 .328 .457 .614 .634 .698 .823 .853 Max (5.9) (5.9) (8.3) (11.6) (15.6) (16.1) (17.7) (20.9) (21.7) APPLICATION NOTES 1. Assembly to be identified with manufacturer's name and part number, space permitting. 2. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 3. For complete dimensions, see the applicable Military Specification. 4. Metric dimensions (mm) are in parentheses. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-74 E-Mail: sales@glenair.com AS85049 AS85049/50 Rectangular Backshell MIL-DTL-24308 Dash Number Basic Part Number M85049/50 - 3 - F B Finish F = Yellow Chromate over Cadmium A D E B Cable Clamp C TABLE I: Dash Number and Backshell Dimensions Dash No. 1 2 3 4 5 A B .015 (0.4) .030 (0.8) 1.203 (30.6) .718 (18.2) 1.531 (38.9) .718 (18.2) 2.078 (52.8) .968 (24.6) 2.718 (69.0) 1 .187 (30.1) 2.625 (66.7) 1 .250 (31.8) (c) 2013 Glenair, Inc. C .005 (0.1) .984 (25.0) 1.312 (33.3) 1.852 (47.0) 2.500 (63.5) 2.406 (61.1) D Max .467 (11.9) .467 (11.9) .467 (11.9) .467 (11.9) .592 (15.0) E .030 (0.8) .437 (11.1) .437 (11.1) .625 (15.9) .812 (20.6) .906 (23.0) APPLICATION NOTES 1. Assembly identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-75 E-Mail: sales@glenair.com AS85049 AS85049/51 and MS3418 90 Strain Relief Self-Locking or Non-Self-Locking CONNECTOR DESIGNATOR: A B AS50151 Series AS34001 Crimp, MIL-DTL-26482 Series II, SAE-AS1703 Crimp Series III, MIL-DTL-83723 Series I & III Basic Part Number M85049/51 Superseded Part Number Dash No. S 10 S = Self-Locking -1 = Non-Self-Locking N = Non-Detented MS3418-10 C Basic Part No. (Non-SelfLocking) Dash No. Metal and Finish Designator A = Aluminum 1000 Hour Cadmium Olive Drab over Electroless Nickel C = Aluminum, Cadmium Olive Drab G = Aluminim Black Anodize N = Aluminum, Electroless Nickel FOR NEW DESIGN USE AS85049/120 Material and Finish Designator A = Aluminum, Black Anodize N = Aluminum, Electroless Nickel S = Stainless Steel, Passivate W = Aluminum, 1000 Hr. Cadmium O.D. over Electroless Nickel APPLICATION NOTES 1. F Self Locking Only A Thread W 2. E Self Locking Only 3. G 4. 5. Cable Entry Assembly to be identified with manufacturer's name and part number, space permitting. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. For complete dimensions, see the applicable Military Specification. Metric dimensions (mm) are in parentheses. H TABLE I: Shell Size, Cable Entry and Backshell Dimensions Dash No. 3*+ 8 10 12 14 16 18 20 22 24 28+ 32+ 36+ 40+ 44+ 48+ 61*+ A Thread Class 2B .562 - 24 UNEF .500 - 20 UNF .625 - 24 UNEF .750 - 20 UNEF .875 - 20 UNEF 1.000 - 20 UNEF 1.062 - 18 UNEF 1.188 - 18 UNEF 1.313 - 18 UNEF 1.438 - 18 UNEF 1.750 - 18 UNS 2.000 - 18 UNS 2.250 - 16 UN 2.500 - 16 UN 2.750 - 16 UN 3.000 - 16 UN 1.500 - 18 UNEF * Not Available in Self Locking (c) 2013 Glenair, Inc. O E Max Self-Locking .885 (22.5) 1.010 (25.7) 1.135 (28.8) 1.260 (32.0) 1.385 (35.2) 1.510 (38.4) 1.635 (41.5) (44.7) 1.760 1.885 (47.9) 2.135 (54.2) 2.395 (60.8) 2.635 (66.9) 2.885 (73.3) 3.135 (79.6) 3.385 (86.0) - F Max Self-Locking 1.257 (31.9) 1.339 (34.0) 1.532 (38.9) 1.592 (40.4) 1.741 (44.2) 1.853 (47.1) 1.978 (50.2) 2.108 (53.5) 2.228 (56.6) 2.528 (64.2) 2.591 (65.8) 2.716 (69.0) 2.841 (72.2) 3.091 (78.5) 3.216 (81.7) - .062 .777 .746 .805 .867 .930 .994 1.171 1.234 1.296 1.358 1.572 1.797 1.922 2.047 2.296 2.421 1.388 G (1.6) (19.7) (18.9) (20.4) (22.0) (23.6) (25.2) (29.7) (31.2) (32.9) (34.5) (39.9) (45.6) (48.8) (52.0) (58.3) (61.5) (35.3) Cable Entry H Max Min Max .782 (19.9) .125 (3.2) .204 (5.2) .782 (19.9) .125 (3.2) .204 (5.2) .862 (21.9) .187 (4.7) .286 (7.3) 1.003 (25.5) .291 (7.4) .416 (10.6) 1.061 (26.9) .351 (8.9) .476 (12.1) 1.334 (33.9) .501 (12.7) .626 (15.9) 1.466 (37.2) .518 (13.2) .706 (17.9) 1.572 (39.9) 581 (14.8) .831 (21.1) 1.688 (42.9) .644 (16.4) .956 (24.3) 1.790 (45.5) .706 (17.9) 1.081 (27.5) 2.035 (51.7) .750 (19.1) 1.187 (30.1) 2.386 (60.6) .875 (22.2) 1.250 (31.8) 2.496 (63.4) .938 (23.8) 1.375 (34.9) 2.566 (65.2) .938 (23.8) 1.500 (38.1) 2.860 (72.6) 1.188 (30.2) 1.750 (44.5) 3.344 (84.9) 1.312 (33.3) 1.875 (47.6) 1.775 (45.1) .706 (17.9) 1.081 (27.5) + Not Available under M83723/15A Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 04.28.16 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-76 E-Mail: sales@glenair.com AS85049 AS85049/52 and MS3417 Straight Strain Relief Self-Locking or Non-Self-Locking CONNECTOR DESIGNATOR: A Basic Part Number AS50151 Series AS34001 Crimp, MIL-DTL-26482 Series II, SAE-AS1703 Crimp Series III, MIL-DTL-83723 Series I & III M85049/52 Superseded Part Number Dash No. S S = Self-Locking -1 = Non-Self-Locking N = Non-Detented MS3417-10 A Basic Part No. (Non-SelfLocking) Dash No. Metal and Finish Designator A = Aluminum 1000 Hour Cadmium Olive Drab over Electroless Nickel C = Aluminum, Cadmium Olive Drab G = Aluminim Black Anodize N = Aluminum, Electroless Nickel 10 Material and Finish Designator A = Aluminum, Black Anodize N = Aluminum, Electroless Nickel S = Stainless Steel, Passivate W = Aluminum, 1000 Hr. Cadmium O.D. over Electroless Nickel APPLICATION NOTES 1. A Thread Cable Entry F Self Locking Only 2. 3. E Dia Self Locking Only FOR NEW DESIGN USE AS85049/118 W 4. G 5. Assembly to be identified with manufacturer's name and part number, space permitting. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. For complete dimensions, see the applicable Military Specification. Metric dimensions (mm) are in parentheses. TABLE I: Shell Size, Cable Entry and Backshell Dimensions Dash No. 3*+ 8 10 12 14 16 18 20 22 24 28+ 32+ 36+ 40+ 44+ 48+ 61*+ A Thread Class 2B .562 - 24 UNEF .500 - 20 UNF .625 - 24 UNEF .750 - 20 UNEF .875 - 20 UNEF 1.000 - 20 UNEF 1.062 - 18 UNEF 1.188 - 18 UNEF 1.313 - 18 UNEF 1.438 - 18 UNEF 1.750 - 18 UNS 2.000 - 18 UNS 2.250 - 16 UN 2.500 - 16 UN 2.750 - 16 UN 3.000 - 16 UN 1.500 - 18 UNEF * Not Available in Self Locking (c) 2013 Glenair, Inc. O E Max Self-Locking .885 (22.5) 1.010 (25.7) 1.135 (28.8) 1.260 (32.0) 1.385 (35.2) 1.510 (38.4) 1.635 (41.5) 1.760 (44.7) 1.885 (47.9) 2.135 (54.2) 2.395 (60.8) 2.635 (66.9) 2.885 (73.3) 3.135 (79.6) 3.385 (86.0) - F Max Self-Locking .73 (18.5) .85 (21.6) .98 (24.9) .98 (24.9) 1.10 (27.9) 1.35 (34.3) 1.98 (50.3) 2.73 (69.3) 2.88 (73.2) 2.528 (64.2) 2.591 (65.8) 2.13 (54.1) 2.44 (62.0) 3.00 (76.2) 3.40 (86.4) - Cable Entry G Max Min Max .782 (19.9) .125 (3.2) .204 (5.2) .782 (19.9) .125 (3.2) .204 (5.2) .862 (21.9) .187 (4.7) .286 (7.3) 1.003 (24.6) .291 (7.4) .416 (10.6) 1.061 (25.5) .351 (8.9) .476 (12.1) 1.234 (26.9) .501 (12.7) .626 (15.9) 1.466 (35.4) .518 (13.2) .706 (17.9) 1.572 (37.2) 581 (14.8) .831 (21.1) 1.688 (39.9) .644 (16.4) .956 (24.3) 1.790 (43.1) .706 (17.9) 1.081 (27.5) 2.035 (45.5) .750 (19.1) 1.187 (30.1) 2.386 (51.7) .875 (22.2) 1.250 (31.8) 2.446 (60.6) .938 (23.8) 1.375 (34.9) 2.566 (65.2) .938 (23.8) 1.500 (38.1) 2.860 (72.6) 1.188 (30.2) 1.750 (44.5) 3.344 (84.9) 1.312 (33.3) 1.875 (47.6) 1.775 (45.1) .706 (17.9) 1.081 (27.5) + Not Available under M83723/15S Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-77 E-Mail: sales@glenair.com B AS85049 AS85049/53, AS85049/54 and AS85049/55 Straight, 45 and 90 Qwik-Ty Strain Reliefs Optional Self-Locking * Optional Ground Lug CONNECTOR DESIGNATOR: A B Configuration AS50151 Series AS34001 MIL-DTL-26482 Series II AS81703 Series III MIL-DTL-83723 Series I and III 40M39569, DEF 5326-3, EN2997 EN3646, ESC 10, ESC 11, LN 29504 NFC93422 Series HE302 PAN 6432-1, PAN 6432-2, PATT 602 OPTIONAL SELF-LOCKING COUPLING Finish -- = Non-Self-Locking G = Non-Self-Locking with Ground Lug* S = Detented, Self-Locking* T = Detented, Self-Locking with Ground Lug N = Non-Detented, Self-Locking H = Non-Detented, Self-Locking with Ground Lug *Configuration Options G, S, T, H and N are only available with AS85049/55 M85049/55 Basic Part Number M85049/53 = Straight M85049/54 = 45 M85049/55 = 90 Shell Size G A = Anodize, Black N = Electroless Nickel W = 1,000 Hour Cadmium Olive Drab over Electroless Nickel X = Nickel Fluorocarbon Polymer Y = Pure Dense Electrodeposited Aluminum Z = Zinc-Nickel, Black 22 N FOR NEW DESIGN APPLICATIONS USE M85049/43 (45), M85049/51 (90) and M85049/52 (Straight) TABLE I: Shell Size, Thread, Cable Entry and Backshell Dimensions Shell Size A Thread Class 2B C Dia Max 03 08 10 12 14 16 18 20 22 24 28 562 - 24 UNEF .500 - 20 UNF .625 - 24 UNEF .750 - 20 UNEF .875 - 20 UNEF 1.000 - 20 UNEF 1.062 - 18 UNEF 1.188 - 18 UNEF 1.313 - 18 UNEF 1.438 - 18 UNEF 1.750 - 18 UNS .780 .660 .780 .940 1.050 1.240 1.380 1.500 1.630 1.750 1.970 (19.8) (16.8) (19.8) (23.9) (26.7) (31.5) (35.1) (38.1) (41.4) (44.5) (50.0) E Dia Max 1.010 .890 1.010 1.140 1.260 1.390 1.510 1.640 1.760 1.890 2.140 F Cable Entry (25.7) (22.6) (25.7) (29.0) (32.0) (35.3) (38.4) (41.7) (44.7) (48.0) (54.4) .260 .260 .365 .501 .575 .700 .779 .904 1.029 1.144 1.379 (6.6) (6.6) (9.3) (12.7) (14.6) (17.8) (19.8) (23.0) (26.1) (29.1) (35.0) G Max .954 .954 .954 .954 1.204 1.204 1.204 1.310 1.430 1.560 1.560 (24.0) (24.0) (24.0) (24.0) (30.6) (30.6) (30.6) (33.3) (36.3) (39.6) (39.6) H Max 1.232 1.232 1.232 1.232 1.232 1.232 1.232 1.482 1.482 1.482 1.469 (31.3) (31.3) (31.3) (31.3) (31.3) (31.3) (31.3) (37.6) (37.6) (37.6) (37.3) J Max .730 (18.5) .730 (18.5) .730 (18.5) .730 (18.5) .730 (18.5) .730 (18.5) .730 (18.5) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) K Max 1.290 1.290 1.290 1.620 1.660 1.720 1.720 1.790 1.850 1.910 2.060 (32.8) (31.0) (32.8) (41.1) (42.2) (43.7) (43.7) (45.5) (47.0) (48.5) (52.3) APPLICATION NOTES 1. Assembly identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Cable entry is defined as the accomodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Metric dimensions (mm) are in parentheses. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-78 Rev. 03/15/18 E-Mail: sales@glenair.com AS85049 AS85049/56 and AS85049/57 Straight and 45 Qwik-Ty Strain Reliefs Optional Self-Locking * Optional Ground Lug Finish A = Anodize, Black N = Electroless Nickel W = 1,000 Hour Cadmium Olive Drab over Electroless Nickel X = Nickel Fluorocarbon Polymer Y = Pure Dense Electrodeposited Aluminum Z = Zinc-Nickel, Black CONNECTOR DESIGNATOR: F Configuration N = Non-Detented G = Self-Locking with Ground Lug H = Non-Detented with Ground Lug S = Self-Locking without Ground Lug -- = Non Self-Locking MIL-DTL-38999 Series I and II Basic Part Number M85049/56 = Straight M85049/57 = 45 M85049/57 G 16 OPTIONAL SELF-LOCKING COUPLING W Shell Size TABLE I: Shell Size, Thread, Cable Entry and Backshell Dimensions Shell Series I Size Shell Size Series II Ref. 8 10 12 14 16 18 20 22 24 9 11 13 15 17 19 21 23 25 A Thread Class 2B .438-28 UNEF .562-24 UNEF .688-24 UNEF .813-20 UNEF .938-20 UNEF 1.063-18 UNEF 1.188-18 UNEF 1.313-18 UNEF 1.438-18 UNEF C Dia Max .750 .850 1.000 1.100 1.250 1.400 1.500 1.650 1.750 (19.1) (21.6) (25.4) (27.9) (31.8) (35.6) (38.1) (41.9) (44.5) E Dia Max .860 .980 1.160 1.280 1.410 1.520 1.640 1.770 1.890 F Cable Entry (21.8) .264 (6.7) (24.9) .392 (10.0) (29.5) .506 (12.9) (32.5) .631 (16.0) (35.8) .756 (19.2) (38.6) .845 (21.5) (41.7) .970 (24.6) (45.0) 1.095 (27.8) (48.0) 1.220 (31.0) G Max .895 .895 .955 1.135 1.135 1.195 1.325 1.445 1.585 H Max (22.7) (22.7) (24.3) (28.8) (28.8) (30.4) (33.7) (36.7) (40.3) 1.210 1.210 1.390 1.390 1.390 1.390 1.390 1.390 1.390 (30.7) (30.7) (35.3) (35.3) (35.3) (35.3) (35.3) (35.3) (35.3) APPLICATION NOTES 1. Assembly identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Cable entry is defined as the accomodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Metric dimensions (mm) are in parentheses. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-79 E-Mail: sales@glenair.com B AS85049 AS85049/58 Potting Boot Ring (MS27458) CONNECTOR DESIGNATOR: F Basic Part Number Dash Number MIL-DTL-38999 Series I and II M85049/58 - 10 B TABLE I: Dash Number, Shell Size and Dimensions Dash No. Shell Size (Ref) A Thread UNEF-2B B Dia Max C Dia Max D Dia .005 (.1) 8 8/9 .4375-28 .600 (15.2) .506 (12.9) .344 (8.7) 10 10/11 .5625-24 .726 (18.4) .631(16.0) .472 (12.0) 12 12/13 .6875-24 .850 (21.6) .756 (19.2) .586 (14.9) 14 14/15 .8125-20 .976 (24.8) .881 (22.4) .711 (18.1) 16 16/17 .9375-20 1.012 (25.7) 1.006 (25.6) .836 (21.2) 18 18/19 1.0625-18 1.226 (31.1) 1.131 (28.7) .942 (23.9) 20 20/21 1.1875-18 1.352 (34.3) 1.256 (31.9) 1.067 (27.1) 22 22/23 1.3125-18 1.476 (37.5) 1.381 (35.1) 1.192 (30.3) 24 24/25 1.4375-18 1.602 (40.7) 1.506 (38.3) 1.317 (33.5) APPLICATION NOTES 1. 2. For complete dimensions see the applicable Military Specification. Finish: 500-Hour Cadmium Olive Drab over Electroless Nickel. (c) 2013 Glenair, Inc. 3. 4. See Pages 30-5 and 68-14 or the AS85049/75 Potting Boot which can be used with this potting ring. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-80 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: C AS85049 AS85049/59 Straight Shrink Boot Adapter Adapter Size Basic Part Number MIL-DTL-22992 M85049/59 - A 10 B Finish A = Black Anodize W = 1000 Hr. Cadmium Olive Drab X = Nickel Fluorocarbon Polymer Y = Pure Dense Electrodeposited Aluminum Z = Zinc Nickel, Black TABLE I: Adapter Size, Thread and Dimensions Adapter Size 12 A Thread Class 2B-LH .750 - 20 UNEF B Max F .016 (0.4) G .031 (0.8) H Dia .010 (0.3) .933 (23.7) .479 (6.4) 1.175 (29.8) .798 (20.3) 14 .875 - 20 UNEF 1.057 (26.8) .479 (6.4) 1.175 (29.8) .922 (23.4) 16 1.000 - 20 UNEF 1.182 (30.0) .479 (6.4) 1.175 (29.8) 1.048 (26.6) 18 1.125 - 18 UNEF 1.307 (33.2) .479 (6.4) 1.175 (29.8) 1.172 (29.8) 20 1.250 - 18 UNEF 1.432 (36.4) .479 (6.4) 1.175 (29.8) 1.297 (32.9) 22 1.375 - 18 UNEF 1.557 (39.5) .479 (6.4) 1.175 (29.8) 1.423 (36.1) 24 1.625 - 18 UNEF 1.797 (45.6) .479 (6.4) 1.175 (29.8) 1.662 (42.2) 28 1.875 - 16 UN 2.057 (52.2) .479 (6.4) 1.175 (29.8) 1.922 (48.8) 32 2.062 - 16 UN 2.307 (58.6) .479 (6.4) 1.175 (29.8) 2.172 (55.2) 36 2.312 - 16 UN 2.557 (64.9) .479 (6.4) 1.175 (29.8) 2.422 (61.5) 40 2.625 - 16 UN 2.869 (72.9) .667 (16.9) 1.375 (44.9) 2.734 (69.4) 44 2.875 - 16 UN 3.120 (79.2) .667 (16.9) 1.375 (44.9) 2.982 (75.7) (c) 2013 Glenair, Inc. APPLICATION NOTES 1. 2. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-81 E-Mail: sales@glenair.com AS85049 AS85049/60-1 and MS3158 Straight Shrink Boot Adapter CONNECTOR DESIGNATOR: B AS50151 Series AS34001 MIL-DTL-26482 Series II AS81703 Series III MIL-DTL-83723 Series I & III 40M39569, DEF 5326-3 EN 2997, EN 3646 ESC 10, ESC 11, LN 29504 NFC93422 Series HE302 PAN 6432-1, PAN 6432-2 PATT 602 A Shell Size Basic Part Number M85049/60-1 W 22 Superseded Part Number Basic Part Number MS3158 Finish A = Black Anodize N = Electroless Nickel W = 1000 Hr. Cadmium Olive Drab X = Nickel Fluorocarbon Polymer Y = Pure Dense Electrodeposited Aluminum Z = Zinc Nickel, Black Shell Size - 22 C Finish C = Cadmium Olive Drab over Electroless Nickel N = Electroless Nickel APPLICATION NOTES 1. 2. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. TABLE I: Shell Size, Thread and Dimensions Shell Size (c) 2013 Glenair, Inc. A Thread Class 2B C Dia Max +.000 (0.0) -.045 (1.14) E Min Dia F Dia +.000 (0.0) -.020 (0.5) G Max 3 .562 - 24 UNEF .670 (17.0) .250 (6.4) .533 (13.5) .832 (21.1) 8 .500 - 20 UNF .620 (15.7) .250 (6.4) .533 (13.5) .832 (21.1) 10 .625 - 24 UNEF .740 (18.8) .355 (9.0) .605 (15.4) .832 (21.1) 12 .750 - 20 UNEF .860 (21.8) .491 (12.5) .774 (19.7) .832 (21.1) 14 .875 - 20 UNEF .980 (24.9) .565 (14.4) .838 (21.3) .832 (21.1) 16 1.000 - 20 UNEF 1.110 (28.2) .690 (17.5) .963 (24.5) .832 (21.1) 18 1.062 - 18 UNEF 1.220 (31.0) .769 (19.5) 1.042 (26.5) .832 (21.1) 20 1.188 - 18 UNEF 1.350 (34.3) .894 (22.7) 1.217 (30.9) .832 (21.1) 22 1.313 - 18 UNEF 1.470 (37.3) 1.019 (25.9) 1.355 (34.4) .832 (21.1) 24 1.438 - 18 UNEF 1.590 (40.4) 1.134 (28.8) 1.443 (36.7) .832 (21.1) 28 1.750 - 18 UNS 1.970 (50.0) 1.369 (34.8) 1.709 (43.4) .994 (25.3) 32 2.000 - 18 UNS 2.220 (56.4) 1.615 (41.0) 1.919 (48.7) .994 (25.3) 36 2.250 - 16 UN 2.470 (62.7) 1.830 (46.5) 2.169 (55.1) .994 (25.3) 40 2.500 - 16 UN 2.720 (69.1) 2.045 (51.9) 2.402 (61.0) .994 (25.3) 44 2.750 - 16 UN 2.970 (75.4) 2.300 (58.4) 2.657 (67.5) .994 (25.3) 48 3.000 - 16 UN 3.220 (81.8) 2.550 (64.8) 2.907 (73.8) .994 (25.3) 61 1.500 - 18 UNEF 1.650 (41.9) 1.174 (29.8) 1.529 (38.8) .832 (21.1) Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 06.14.17 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-82 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: A Basic Part Number AS50151 Series AS34001 MIL-DTL-26482 Series II AS81703 Series III MIL-DTL-83723 Series I & III 40M39569, DEF 5326-3 EN 2997, EN 3646 ESC 10, ESC 11, LN 29504 NFC93422 Series HE302 PAN 6432-1, PAN 6432-2 PATT 602 AS85049 AS85049/60-2G and MS3416-G Straight Shrink Boot Adapter Superseded Part Number Shell Size M85049/60-2G 22 Basic Part Number W Shell Size Style MS3416 - 22 Finish A = Black Anodize W = 1000 Hr. Cadmium Olive Drab X = Nickel Fluorocarbon Polymer Y = Pure Dense Electrodeposited Aluminum Z = Zinc Nickel, Black G C Finish A = 1,000 Hr. Cadmium Olive Drab C = Cadmium Olive Drab N = Electroless Nickel APPLICATION NOTES 1. 2. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. TABLE I: Shell Size, Thread and Dimensions Shell Size (c) 2013 Glenair, Inc. A Thread Class 2B D Dia +.000 (0.0) -.020 (0.5) F Dia +.000 (0.0) -.045 (1.1) G Max 3 .562 - 24 UNEF .709 (18.0) .750 (19.1) .540 (13.7) 8 .500 - 20 UNF .657 (16.7) .688 (17.5) .540 (13.7) 10 .625 - 24 UNEF .774 (19.7) .803 (20.4) .540 (13.7) 12 .750 - 20 UNEF .898 (22.8) .938 (23.8) .540 (13.7) 14 .875 - 20 UNEF 1.024 (26.0) 1.063 (27.0) .540 (13.7) 16 1.000 - 20 UNEF 1.152 (29.3) 1.238 (31.4) .540 (13.7) 18 1.062 - 18 UNEF 1.243 (31.6) 1.310 (33.3) .540 (13.7) 20 1.188 - 18 UNEF 1.370 (34.8) 1.436 (36.5) .540 (13.7) 22 1.313 - 18 UNEF 1.443 (36.7) 1.560 (39.6) .540 (13.7) 24 1.438 - 18 UNEF 1.618 (41.1) 1.686 (42.8) .540 (13.7) 28 1.750 - 18 UNS 1.969 (50.0) 2.062 (52.4) .702 (17.8) 32 2.000 - 18 UNS 2.219 (56.4) 2.312 (58.7) .702 (17.8) 36 2.250 - 16 UN 2.469 (62.7) 2.562 (65.1) .702 (17.8) 40 2.500 - 16 UN 2.719 (69.1) 2.812 (71.4) .702 (17.8) 44 2.750 - 16 UN 2.969 (75.4) 3.062 (77.8) .702 (17.8) 48 3.000 - 16 UN 3.219 (81.8) 3.312 (84.1) .702 (17.8) 61 1.500 - 18 UNEF 1.653 (42.0) 1.748 (44.4) .540 (13.7) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Mil-Spec Backshells Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-83 E-Mail: sales@glenair.com B AS85049 AS85049/61 Potting Boot Ring CONNECTOR DESIGNATOR: F Basic Part Number Dash Number MIL-DTL-27599 M85049/61 - 10 B TABLE I: Dash Number and Dimensions Dash No. Shell Size (Ref) A Thread UNEF-2B B Dia Max C Dia Max D Dia .005 (.1) 8 8/9 .4375-28 .594 (15.1) .521 (13.2) .476 (12.1) 10 10/11 .5625-24 .734 (18.6) .647(16.4) .602 (15.3) 12 12/13 .6875-24 .844 (21.4) .771 (19.6) .726 (18.4) 14 14/15 .8125-20 .969 (24.6) .897 (22.8) .852 (21.6) 16 16/17 .9375-20 1.094 (27.8) 1.023 (26.0) .978 (24.8) 18 18/19 1.0625-18 1.234 (31.3) 1.147 (29.1) 1.102 (28.0) 20 20/21 1.1875-18 1.344 (34.1) 1.273 (32.3) 1.228 (31.2) 22 22/23 1.3125-18 1.469 (37.3) 1.397 (35.5) 1.352 (34.3) 24 24/25 1.4375-18 1.594 (40.5) 1.524 (38.7) 1.478 (37.5) APPLICATION NOTES 1. 2. For complete dimensions see the applicable Military Specification. Finish: 500-Hour Cadmium Olive Drab over Electroless Nickel. (c) 2013 Glenair, Inc. 3. 4. See Pages 30-4 and 68-13 for the AS85049/75 Potting Boot which can be used with this potting ring and Page 88-13 Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-84 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: F AS85049 AS85049/62 and M38999/2 Straight Shrink Boot Adapter Basic Part Number MIL-DTL-38999 Series I & II 40M38277, PAN 6433-1 PATT 614, PATT 616 NFC93422 Series HE308 & HE309 Shell Size M85049/62 - 10 Drain Hole Option (Omit for None) W D B Finish A = Black Anodize W = 1000 Hr. Cadmium Olive Drab X = Nickel Fluorocarbon Polymer Y = Pure Dense Electrodeposited Aluminum Z = Zinc Nickel, Black TABLE I: Shell Size, Thread and Dimensions Shell Size A Thread Class 2B C Max E Dia Min F Dia Min G Max 08 .438 - 28 UNEF .750 (19.1) .250 (6.4) .533 (13.5) 1.000 (25.4) 10 .562 - 24 UNEF .850 (21.6) .375 (9.5) .605 (15.4) 1.000 (25.4) 12 .688 - 24 UNEF 1.000 (25.4) .500 (12.7) .774 (19.7) 1.000 (25.4) 14 .813 - 20 UNEF 1.100 (27.9) .625 (15.9) .838 (21.3) 1.000 (25.4) 16 .938 - 20 UNEF 1.250 (31.8) .750 (19.1) .963 (24.5) 1.000 (25.4) 18 1.063 - 18 UNEF 1.400 (35.6) .812 (20.6) 1.042 (26.5) 1.000 (25.4) 20 1.188 - 18 UNEF 1.500 (38.1) .937 (23.8) 1.217 (30.9) 1.000 (25.4) 22 1.313 - 18 UNEF 1.650 (41.9) 1.062 (27.0) 1.355 (34.4) 1.000 (25.4) 24 1.438 - 18 UNEF 1.750 (44.5) 1.188 (30.2) 1.443 (36.7) 1.000 (25.4) (c) 2013 Glenair, Inc. APPLICATION NOTES 1. 2. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-85 E-Mail: sales@glenair.com AS85049 AS85049/63 90 Qwik-Ty Strain Relief Optional Self-Locking * Optional Ground Lug Finish A = Anodize, Black N = Electroless Nickel W = 1,000 Hour Cadmium Olive Drab over Electroless Nickel X = Nickel Fluorocarbon Polymer Y = Pure Dense Electrodeposited Aluminum Z = Zinc-Nickel, Black CONNECTOR DESIGNATOR: F MIL-DTL-38999 Series I and II B Basic Part Number M85049/63 = 90 Configuration N = Non-Detented G = Self-Locking with Ground Lug H = Non-Detented with Ground Lug S = Self-Locking without Ground Lug -- = Non Self-Locking M85049/63 G 16 OPTIONAL SELF-LOCKING COUPLING W Shell Size TABLE I: Shell Size, Thread, Cable Entry and Backshell Dimensions Shell Series I Size Shell Size Series II Ref. 8 10 12 14 16 18 20 22 24 9 11 13 15 17 19 21 23 25 A Thread Class 2B .438-28 UNEF .562-24 UNEF .688-24 UNEF .813-20 UNEF .938-20 UNEF 1.063-18 UNEF 1.188-18 UNEF 1.313-18 UNEF 1.438-18 UNEF C Dia Max .750 .850 1.000 1.100 1.250 1.400 1.500 1.650 1.750 (19.1) (21.6) (25.4) (27.9) (31.8) (35.6) (38.1) (41.9) (44.5) E Dia Max .860 .980 1.160 1.280 1.410 1.520 1.640 1.770 1.890 F Cable Entry (21.8) .264 (6.7) (24.9) .392 (10.0) (29.5) .506 (12.9) (32.5) .631 (16.0) (35.8) .756 (19.2) (38.6) .845 (21.5) (41.7) .970 (24.6) (45.0) 1.095 (27.8) (48.0) 1.220 (31.0) J Max 1.220 1.290 1.620 1.660 1.720 1.720 1.790 1.850 1.910 K Self-Locking (31.0) (32.8) (41.1) (42.2) (43.7) (43.7) (45.5) (47.0) (48.5) .630 .630 .630 .700 .700 .730 .730 .730 .730 (16.0) (16.0) (16.0) (17.8) (17.8) (18.5) (18.5) (18.5) (18.5) APPLICATION NOTES 1. Assembly identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Cable entry is defined as the accomodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Metric dimensions (mm) are in parentheses. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-86 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: H AS85049 AS85049/69 Straight Shrink Boot Adapter Basic Part Number MIL-DTL-38999 Series III & IV EN3645 Shell Size M85049/69 - 11 Drain Hole Option (Omit for None) A D Finish A = Black Anodize N = Electroless Nickel W = 1000 Hr. Cadmium Olive Drab X = Nickel Fluorocarbon Polymer Y = Pure Dense Electrodeposited Aluminum Z = Zinc Nickel, Black TABLE I: Shell Size, Thread and Dimensions Shell Size A Thread Class 6H C Max E Dia Min F Dia Max G Max 9 M12 X 1 - 6H .750 (19.1) .250 (6.4) .533 (13.5) .710 (18.0) 11 M15 X 1 - 6H .850 (21.6) .375 (9.5) .605 (15.4) .710 (18.0) 13 M18 X 1 - 6H 1.000 (25.4) .500 (12.7) .774 (19.7) .710 (18.0) 15 M22 X 1 - 6H 1.150 (29.2) .625 (15.9) .838 (21.3) .710 (18.0) 17 M25 X 1 - 6H 1.250 (31.8) .750 (19.1) .963 (24.5) .710 (18.0) 19 M28 X 1 - 6H 1.400 (35.6) .812 (20.6) 1.042 (26.5) .710 (18.0) 21 M31 X 1 - 6H 1.550 (39.4) .938 (23.8) 1.217 (30.9) .710 (18.0) 23 M34 X 1 - 6H 1.650 (41.9) 1.062 (27.0) 1.355 (34.4) .710 (18.0) 25 M37 X 1 - 6H 1.785 (47.0) 1.188 (30.2) 1.443 (36.7) .710 (18.0) (c) 2013 Glenair, Inc. APPLICATION NOTES 1. 2. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-87 E-Mail: sales@glenair.com B AS85049 AS85049/74 Potting Boot For Use with AS85049/61 Potting Boot Ring Shell Size Basic Part Number (Page B-84) Geometry 1 - Straight 2 = 90 M85049/74 - 10 - 1 B G A D B G B E C F Min Cross Section TABLE I: Shell Size and Dimensions Shell Size A Min A Max B Dia .005 (.1) G Max 8 450 (11.4) .500 (12.7) .511 (13.0) .608 (15.4) 10 .450 (11.4) .500 (12.7) .637 (16.2) .734 (18.6) 12 .450 (11.4) .500 (12.7) .761 (19.3) .858 (21.8) 14 .450 (11.4) .500 (12.7) .887 (22.5) .984 (25.0) 16 .450 (11.4) .500 (12.7) 1.013 (25.7) 1.110 (28.2) 18 .450 (11.4) .500 (12.7) 1.137 (28.9) 20 .550 (14.0) .594 (15.1) 1.263 (32.1) 22 .550 (14.0) .594 (15.1) 24 .550 (14.0) .594 (15.1) C Min ID .317 (8.1) D Max E Max F Min .766 (19.5) 1.000 (25.4) .110 (2.8) .434 (11.0) .922 (23.4) 1.125 (28.6) .200 (5.1) .548 (13.9) 1.031 (26.2) 1.125 (28.6) .290 (7.4) .673 (17.1) 1.016 (25.8) 1.297 (32.9) .400 (10.2) .798 (20.3) 1.016 (25.8) 1.375 (34.9) .490 (12.4) 1.234 (31.3) .899 (22.8) 1.078 (27.4) 1.469 (37.3) .590 (15.0) 1.360 (34.5) 1.024 (26.0) 1.094 (27.8) 1.625 (41.3) .730 (18.5) 1.387 (35.2) 1.484 (37.7) 1.149 (29.2) 1.094 (27.8) 1.703 (43.3) .860 (21.8) 1.513 (38.4) 1.610 (40.9) 1.274 (32.4) 1.281 (32.5) 2.047 (52.0) 1.070 (27.2) APPLICATION NOTES 1. 2. 3. (c) 2013 Glenair, Inc. For complete dimensions see the applicable Military Specification. Material: Translucent nylon, minimum wall thickness .020 (.51). Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-88 E-Mail: sales@glenair.com For Use with AS85049/58 Potting Boot Ring AS85049 AS85049/75 Potting Boot Shell Size Basic Part Number (Page B-80) Geometry 1 - Straight 2 = 90 M85049/75 - 10 - 1 B .297 (7.5) Max D .031 (.8) .010 (.3) B B E .031 (.8) .010 (.3) C F Min Cross Section TABLE I: Shell Size and Dimensions Shell Size B Dia .005 (.1) C Min ID D Max E Max F Min 8 527 (13.4) .434 (11.0) .438 (11.1) .766 (19.5) .073 (1.9) 10 .652 (16.6) .548 (13.9) .469 (11.9) .891 (22.6) .117 (3.0) 12 .776 (19.7) .673 (17.1) .562 (14.3) 1.031 (26.2) .206 (5.2) 14 .898 (22.8) .798 (20.3) .719 (18.3) 1.156 (29.4) .384 (9.8) 16 1.016 (25.8) .899 (22.8) .781 (19.8) 1.287 (32.7) .443 (11.3) 18 1.140 (29.0) 1.024 (26.0) .844 (21.4) 1.406 (35.7) .561 (14.2) 20 1.265 (32.1) 1.149 (29.2) .906 (23.0) 1.531 (38.9) .693 (17.6) 22 1.390 (35.3) 1.274 (32.4) .938 (23.8) 1.656 (42.1) .840 (21.3) 24 1.515 (38.5) 1.399 (35.5) 1.031 (26.2) 1.781 (45.2) .999 (25.4) APPLICATION NOTES 1. 2. 3. (c) 2013 Glenair, Inc. For complete dimensions see the applicable Military Specification. Material: Translucent nylon, minimum wall thickness .020 (.51). Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-89 E-Mail: sales@glenair.com AS85049 AS85049/76 90 EMI/RFI Environmental Backshell CONNECTOR DESIGNATOR: F Finish X = Aluminum, Nickel Flurocarbon Polymer Z = Aluminum, Zinc-Nickel, Black N = Electroless Nickel W = 1,000 Hr. Cadmium Olive Drab over Electroless Nickel MIL-DTL-38999 Series I and II M85049/76 - 10 B TABLE I: Shell Size, Thread and Dimensions Dash No. 08 10 12 14 16 18 20 22 24 C Dia Max Series I Shell Size Series II A Thread Class 2B 09 11 13 15 17 19 21 23 25 08 10 12 14 16 18 20 22 24 .438 - 28 UNEF .562 - 24 UNEF .688 - 24 UNEF .813 - 20 UNEF .938 - 20 UNEF 1.063 - 18 UNEF 1.188 - 18 UNEF 1.313 - 18 UNEF 1.438 - 18 UNEF Shell Size Basic Part Number .750 .850 1.000 1.150 1.250 1.400 1.550 1.650 1.850 Dash Number (Table I) W 01 Clamp Size (Tables II & III) (19.1) (21.6) (25.4) (29.2) (31.8) (35.6) (39.4) (41.9) (47.0) TABLE II: Shell Size, Series 1 Reference, Clamp Size and Dimensions Shell Size Shell Size Dash No. Series I Series II 08 10 12 14 16 18 20 22 24 09 11 13 15 17 19 21 23 25 08 10 12 14 16 18 20 22 24 Clamp Size Min Max 01 01 02 02 02 03 03 03 04 02 03 04 05 06 07 08 09 10 E .156 (4.0) .532 .627 .642 .719 .774 .854 .899 1.009 1.024 (13.5) (15.9) (16.3) (18.3) (19.7) (21.7) (22.8) (25.6) (26.0) F .188 (4.8) 3.267 3.387 3.407 3.477 3.567 3.737 3.737 3.847 3.847 (83.0) (86.0) (86.5) (88.3) (90.6) (94.9) (94.9) (97.7) (97.7) APPLICATION NOTES 1. 2. 3. Clamp Size For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. (c) 2013 Glenair, Inc. TABLE III: Clamp Size, Cable Range and Dimensions 01 02 03 04 05 06 07 08 09 10 Min .062 .125 .250 .375 .500 .625 .750 .875 1.000 1.125 Cable Range Max (1.6) (3.2) (6.4) (9.5) (12.7) (15.9) (19.1) (22.2) (25.4) (28.6) .125 .250 .375 .500 .625 .750 .875 1.000 1.125 1.250 Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 (3.2) (6.4) (9.5) (12.7) (15.9) (19.1) (22.2) (25.4) (28.6) (31.8) G Max .800 1.000 1.100 1.200 1.250 1.400 1.500 1.650 1.750 1.900 (20.3) (25.4) (27.9) (30.5) (31.8) (35.6) (38.1) (41.9) (44.5) (48.3) Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-90 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: F AS85049 AS85049/77 45 EMI/RFI Environmental Backshell Finish X = Aluminum, Nickel Flurocarbon Polymer Z = Aluminum, Zinc-Nickel, Black N = Electroless Nickel W = 1,000 Hr. Cadmium Olive Drab over Electroless Nickel MIL-DTL-38999 Series I and II M85049/77 - 10 Basic Part Number TABLE I: Shell Size, Thread and Dimensions Dash No. 08 10 12 14 16 18 20 22 24 01 Clamp Size (Tables II & III) Dash Number (Table I) C Dia Max Series I Shell Size Series II A Thread Class 2B 09 11 13 15 17 19 21 23 25 08 10 12 14 16 18 20 22 24 .438 - 28 UNEF .562 - 24 UNEF .688 - 24 UNEF .813 - 20 UNEF .938 - 20 UNEF 1.063 - 18 UNEF 1.188 - 18 UNEF 1.313 - 18 UNEF 1.438 - 18 UNEF Shell Size W .750 .850 1.000 1.150 1.250 1.400 1.550 1.650 1.850 (19.1) (21.6) (25.4) (29.2) (31.8) (35.6) (39.4) (41.9) (47.0) TABLE II: Shell Size, Series 1 Reference, Clamp Size and Dimensions Shell Size Shell Size Dash No. Series I Series II 08 10 12 14 16 18 20 22 24 09 11 13 15 17 19 21 23 25 08 10 12 14 16 18 20 22 24 Clamp Size Min Max 01 01 02 02 02 03 03 03 04 02 03 04 05 06 07 08 09 10 E .062 (1.6) .398 .458 .518 .588 .678 .868 .868 .958 .958 (10.1) (11.6) (13.2) (14.9) (17.2) (22.0) (22.0) (24.3) (24.3) F .062 (1.6) 3.088 3.148 3.208 3.298 3.408 3.598 3.598 3.748 3.748 (78.4) (80.0) (81.5) (83.8) (86.6) (91.4) (91.4) (95.2) (95.2) TABLE III: Clamp Size, Cable Range and Dimensions Clamp Size APPLICATION NOTES 1. 2. 3. 01 02 03 04 05 06 07 08 09 10 For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. (c) 2013 Glenair, Inc. Min .062 .125 .250 .375 .500 .625 .750 .875 1.000 1.125 Cable Range Max (1.6) (3.2) (6.4) (9.5) (12.7) (15.9) (19.1) (22.2) (25.4) (28.6) .125 .250 .375 .500 .625 .750 .875 1.000 1.125 1.250 Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 (3.2) (6.4) (9.5) (12.7) (15.9) (19.1) (22.2) (25.4) (28.6) (31.8) G Max .800 1.000 1.100 1.200 1.250 1.400 1.500 1.650 1.750 1.900 (20.3) (25.4) (27.9) (30.5) (31.8) (35.6) (38.1) (41.9) (44.5) (48.3) Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-91 E-Mail: sales@glenair.com B AS85049 AS85049/78 45 EMI/RFI Environmental Backshell CONNECTOR DESIGNATOR: H N = Electroless Nickel W = 1,000 Hr. Cadmium Olive Drab over Electroless Nickel MIL-DTL-38999, Series III and IV EN3645 Finish X = Aluminum, Nickel Flurocarbon Polymer Z = Aluminum, Zinc-Nickel, Black M85049/78 - 10 B Basic Part Number TABLE I: Shell Size, Thread and Dimensions Shell Size 09 11 13 15 17 19 21 23 25 A Thread Class 2B M12 X 1 - 6H M15 X 1 - 6H M18 X 1 - 6H M22 X 1 - 6H M25 X 1 - 6H M28 X 1 - 6H M31 X 1 - 6H M34 X 1 - 6H M37 X 1 - 6H W 01 Clamp Size (Tables II & III) Shell Size (Tables I & II) B Dia Max .750 (19.1) .850 (21.6) 1.000 (25.4) 1.150 (29.2) 1.250 (31.8) 1.400 (35.6) 1.550 (39.4) 1.650 (41.9) 1.850 (47.0) TABLE II: Shell Size, Clamp Size and Dimensions Shell Size 09 11 13 15 17 19 21 23 25 Clamp Size Min Max 01 01 02 02 02 03 03 03 04 02 03 04 05 06 07 08 09 10 F .062 (1.6) .398 .458 .518 .588 .678 .868 .868 .958 .958 (10.1) (11.6) (13.2) (14.9) (17.2) (22.0) (22.0) (24.3) (24.3) G .062 (1.6) 3.088 3.148 3.208 3.298 3.408 3.598 3.598 3.748 3.748 (78.4) (80.0) (81.5) (83.8) (86.6) (91.4) (91.4) (95.2) (95.2) APPLICATION NOTES 1. 2. 3. TABLE III: Clamp Size, Cable Range and Dimensions Clamp Size 01 02 03 04 05 06 07 08 09 10 For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. (c) 2013 Glenair, Inc. Cable Range Min Max .062 .125 .250 .375 .500 .625 .750 .875 1.000 1.125 (1.6) (3.2) (6.4) (9.5) (12.7) (15.9) (19.1) (22.2) (25.4) (28.6) .125 .250 .375 .500 .625 .750 .875 1.000 1.125 1.250 Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 H Max (3.2) (6.4) (9.5) (12.7) (15.9) (19.1) (22.2) (25.4) (28.6) (31.8) .800 1.000 1.100 1.200 1.250 1.400 1.500 1.650 1.750 1.900 (20.3) (25.4) (27.9) (30.5) (31.8) (35.6) (38.1) (41.9) (44.5) (48.3) Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-92 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: H AS85049 AS85049/79 90 EMI/RFI Environmental Backshell N = Electroless Nickel W = 1,000 Hr. Cadmium Olive Drab over Electroless Nickel MIL-DTL-38999, Series III and IV EN3645 Finish X = Aluminum, Nickel Flurocarbon Polymer Z = Aluminum, Zinc-Nickel, Black M85049/79 - 10 Basic Part Number TABLE I: Shell Size, Thread and Dimensions Shell Size 09 11 13 15 17 19 21 23 25 A Thread Class 2B M12 X 1 - 6H M15 X 1 - 6H M18 X 1 - 6H M22 X 1 - 6H M25 X 1 - 6H M28 X 1 - 6H M31 X 1 - 6H M34 X 1 - 6H M37 X 1 - 6H W 01 Clamp Size (Tables II & III) Shell Size (Tables I & II) B Dia Max .750 (19.1) .850 (21.6) 1.000 (25.4) 1.150 (29.2) 1.250 (31.8) 1.400 (35.6) 1.550 (39.4) 1.650 (41.9) 1.850 (47.0) TABLE II: Shell Size, Clamp Size and Dimensions Shell Size 09 11 13 15 17 19 21 23 25 Clamp Size Min Max 01 01 02 02 02 03 03 03 04 02 03 04 05 06 07 08 09 10 F .156 (4.0) .532 .627 .642 .719 .774 .854 .899 1.009 1.024 (13.5) (15.9) (16.3) (18.3) (19.7) (21.7) (22.8) (25.6) (26.0) G .188 (4.8) 3.267 3.387 3.407 3.477 3.567 3.737 3.737 3.847 3.847 APPLICATION NOTES 1. 2. 3. (83.0) (86.0) (86.5) (88.3) (90.6) (94.9) (94.9) (97.7) (97.7) TABLE III: Clamp Size, Cable Range and Dimensions Clamp Size 01 02 03 04 05 06 07 08 09 10 For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. (c) 2013 Glenair, Inc. Min .062 .125 .250 .375 .500 .625 .750 .875 1.000 1.125 Cable Range Max (1.6) (3.2) (6.4) (9.5) (12.7) (15.9) (19.1) (22.2) (25.4) (28.6) .125 .250 .375 .500 .625 .750 .875 1.000 1.125 1.250 (3.2) (6.4) (9.5) (12.7) (15.9) (19.1) (22.2) (25.4) (28.6) (31.8) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 H Max .800 1.000 1.100 1.200 1.250 1.400 1.500 1.650 1.750 1.900 (20.3) (25.4) (27.9) (30.5) (31.8) (35.6) (38.1) (41.9) (44.5) (48.3) Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-93 E-Mail: sales@glenair.com B AS85049 AS85049/80 Sealing Plug for MIL-DTL-38999 Connectors Contact Sizes 8, 12 and 16 Dash Number Basic Part Number M85049/80 - 16 B 1.506 +.000 -.040 (38.25 +0 -1.02) .029 (0.74) +.004 -.000 (+0.10 -0) .015 x 45 .237 (6.02) +.000 (0.0) -.020 (0.51) .130 (3.30) Dia +0 -.020 (0.51) .095 (2.41) +.000 (0.0) -.002 (0.05) .182 (4.62) +.000 (0.0) Dia -.003 (0.08) .020 (0.51) .010 (0.25) x 45 .5 Chamfer (Optional Rad Max) 45 Typ .205 (5.21) Min .151 (3.84) +.000 (0.0) Dia -.003 (0.08) .050 (1.27) +.010 (0.25) Dia -.000 (0.0) .271 (6.88) +.000 (0.0) -.010 (0.25) Dimensions and Configuration for Size 12 Contacts 1.506 (38.25) +.000 (0.0) -.040 (1.02) .155 (3.94) + 0 -.003 (0.08) Dia .840 (21.34) .810 (20.57) .015 (0.38) x 45 .219 (5.56) Dia .217 (5.51) .029 (0.74) +.004 (0.10) -.0 .316 (8.03) Dia .313 (7.95) .258 (6.55) Min 45 Typ .276 (7.01) + 0 -.003 (0.08) .271 (6.88) + 0 (0.0) -.020 (0.51) .151 (3.84) .141 (3.58) Dia Dimensions and Configuration for Size 8 Contacts (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-94 E-Mail: sales@glenair.com 1.506 +.000 -.040 (38.25 +0 -1.02) AS85049 AS85049/80 Sealing Plug for MIL-DTL-38999 Connectors Contact Sizes 8, 12 and 16 .029 (0.74) +.004 -.000 (+0.10 -0) .010 x 45 .237 (6.02) +.000 (0.0) -.010 (0.25) .063 (1.60) +.000 (0.0) -.002 (0.05) .093 (2.36) Dia +0 -.020 (0.51) .130 (3.30) +.000 (0.0) Dia -.003 (0.08) .020 (0.51) .010 (0.25) x 45 .5 Chamfer (Optional Rad Max) 45 Typ .205 (5.21) Min .103 (2.62) +.000 (0.0) Dia -.002 (0.05) .020 (0.51) +.010 (0.25) Dia -.000 (0.0) .271 (6.88) +.000 (0.0) -.010 (0.25) Dimensions and Configuration for Size 16 Contacts Figure 1 Figure 2 Figure 3 Table I: Insertion and Removal Tools Figure 1 2 3 Size #16 #12 #8 Type Insertion/Extraction Insertion/extraction Extraction only Glenair Part Number 809-131 809-132 859-022 Military Part Number M81969/14-03 M81969/14-04 M81969/14-06 APPLICATION NOTES 1. 2. 3. 4. 5. 6. 7. 8. Assembly identified with manufacturer's name and part number, space permitting. Color: Size 16 - Blue, IAW EIA RS359 Size 12 - Yellow, IAW EIA RS359 Size 8 - Green, IAW EIA RS359 Insulation resistance: 100 megaohms minimum at 500V DC when tested IAW EIA 364-21, using flat probes placed on opposite ends of the dummy contact. Size 16 is for use in MIL-DTL-Series I, III or IV connectors in size 16 contact cavities. Size 12 is for use in MIL-DTL-38999 Series I, III or IV connectors in size 12 contact cavities. Size 8 is for use in MIL-DTL-38999 Series I, III or IV connectors in size 8 cavities. Sizes 16, 12 and 8 dummy contacts are to be used in lieu of contacts and sealing plugs in unwired contact cavities for both pin and socket inserts. The size 8 dummy contact requires an additional boot (to be provided by the connector manufacturer) for insert arrangements 17-2, 19-18, 21-75, 25-7, 25-8, 25-46 and 25-90 to seal the cavity. For complete dimensions, see the applicable Military Specification. Metric dimensions (mm) are in parentheses. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-95 E-Mail: sales@glenair.com B AS85049 AS85049/81 Sealing Plug for MIL-DTL-38999 Connectors Basic Part Number Dash Number M85049/81 - 10 B A B D C E H Dia Typ F Dia G Dia Typ 45 Typ TABLE I: Dimensions Dash No. A Dim B Dim C Dim D Dim E Dim F Dia G Dia H Dia 10 .702 (17.83) .672 (17.07) .255 (6.48) .245 (6.22) .034 (0.86) .028 (0.71) .255 (6.48) .245 (6.22) .034 (0.86) .028 (0.71) .155 (3.94) .149 (3.78) .130 (3.30) .120 (3.05) .185 (4.70) .179 (4.55) APPLICATION NOTES 1. 2. 3. 4. 5. 6. 7. Assembly identified with manufacturer's name and part number, space permitting. Material and color: Green polytetrafluoroethylene, perfluoroalkoxy (PFA) or fluorinated ethylene propylene (FEP) rod, molded or extruded, temperature limit 200C minimum. Insulation resistance: 100 megaohms minimum at 500V DC when tested IAW EIA 364-21, using flat probes placed on opposite ends of the sealing plug. Tool: Size 10 insertion and removal tool, military part number M81969/14-05. Designed for use with MIL-DTL-38999 connectors utilizing size 10 contact cavities for AS39029/56 and /58 contacts. Sealing plug to be used in both pin and socket cavities. For complete dimensions, see the applicable Military Specification. Metric dimensions (mm) are in parentheses. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-96 E-Mail: sales@glenair.com AS85049 AS85049/82, AS85049/83 and AS85049/84 Straight, 45 and 90 Banding Backshells with Self-Locking Coupling Basic Part Number M85049/82 = Straight M85049/83 = 45 M85049/84 = 90 CONNECTOR DESIGNATOR: A AS50151 Series AS34001 MIL-DTL-26482 Series II AS81703 Series III MIL-DTL-83723 Series I and III 40M39569, DEF 5326-3, EN 2997, EN 3646 ESC 10, ESC 11, LN 29504 NFC93422 Series HE302 PAN 6432-1, PAN 6432-2, PATT 602 -- = Detented N = Non-Detented M85049/82 N Entry Size (Table I) Shell Size (Table I) 16 P 02 Finish N = Electroless Nickel P = Cadmium, Olive Drab over Electroless Nickel with Polysulfide Sealant Strips W = 1,000 Hr. Cadmium Olive Drab over Electroless Nickel X = Aluminum, Nickel Fluorocarbon Polymer YP = Aluminum, Pure Dense Electrodeposited Aluminum with Polysulfide Sealant Strips Z = Aluminum, Zinc-Nickel, Black ZP = Aluminum, Zinc Nickel with Polysulphide Sealant Strips APPLICATION NOTES 1. 2. 3. 4. (c) 2013 Glenair, Inc. Assembly identified with manufacturer's name and part number, space permitting. For complete dimensions, see the applicable Military Specification. Metric dimensions (mm) are in parentheses. For use with AS85049/128 Bands. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-97 E-Mail: sales@glenair.com B AS85049 AS85049/82, AS85049/83 and AS85049/84 Straight, 45 and 90 Banding Backshells B with Self-Locking Coupling TABLE I: Shell Size, Cable Entry and Backshell Dimensions Shell Size 08 10 12 14 16 18 20 22 24 28 A Thread Class 2B .500 - 20 UNF .625 - 24 UNEF .750 - 20 UNEF .875 - 20 UNEF 1.000 - 20 UNEF 1.062 - 18 UNEF 1.188 - 18 UNEF 1.313 - 18 UNEF 1.438 - 18 UNEF 1.750 - 18 UNS (c) 2013 Glenair, Inc. C Dia Max .886 1.010 1.130 1.260 1.386 1.510 1.636 1.760 1.886 2.136 (22.4) (25.7) (28.7) (32.0) (35.1) (38.4) (41.4) (44.7) (47.8) (54.1) E Dia Cable Entry Size 02 .010 (0.30) E Dia Cable Entry Size 03 .010 (0.30) N/A .250 (6.4) N/A .312 (7.9) .312 (7.9) .438 (11.1) .438 (11.1) .562 (14.3) .500 (12.7) .625 (15.9) .625 (15.9) .750 (19.1) .625 (15.9) .812 (20.6) .688 (17.5) .938 (23.8) .750 (19.1) 1.000 (25.4) .875 (22.2) 1.125 (28.6) F Max .870 .890 .920 .940 .960 .980 1.00 1.030 1.050 1.100 (22.1) (22.6) (23.4) (23.9) (24.4) (24.9) (25.4) (26.2) (26.7) (27.9) G Max 1.160 1.180 1.200 1.220 1.250 1.260 1.290 1.310 1.340 1.380 H Max (29.5) (30.0) (30.5) (31.0) (31.8) (32.0) (32.8) (33.3) (34.0) (35.1) 1.188 1.281 1.406 1.531 1.656 1.718 1.844 1.938 2.093 2.531 Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 (30.2) (32.5) (35.7) (38.9) (42.1) (43.6) (46.8) (49.2) (53.2) (64.3) J Max 1.417 1.480 1.542 1.605 1.667 1.730 1.792 1.850 1.917 2.042 (36.0) (37.6) (39.2) (40.8) (42.3) (43.9) (45.5) (47.0) (48.7) (51.9) Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-98 E-Mail: sales@glenair.com AS85049 AS85049/85, AS85049/86 and AS85049/87 Straight, 45 and 90 Banding Backshells with Self-Locking Coupling CONNECTOR DESIGNATOR: F MIL-DTL-38999 Series I and II Basic Part Number M85049/85 = Straight M85049/86 = 45 M85049/87 = 90 -- = Detented N = Non-Detented M85049/85 N Shell Size (Table I) 16 P Entry Size (Table I) 02 Finish N = Electroless Nickel P = Cadmium, Olive Drab over Electroless Nickel with Polysulfide Sealant Strips W = 1,000 Hr. Cadmium Olive Drab over Electroless Nickel X = Aluminum, Nickel Fluorocarbon Polymer YP = Aluminum, Pure Dense Electrodeposited Aluminum with Polysulfide Sealant Strips Z = Aluminum, Zinc-Nickel, Black ZP = Aluminum, Zinc Nickel with Polysulphide Sealant Strips O-Ring Typ (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-99 E-Mail: sales@glenair.com B AS85049 AS85049/85, AS85049/86 and AS85049/87 Straight, 45 and 90 Banding Backshells with Self-Locking Coupling TABLE I: Shell Size, Cable Entry and Backshell Dimensions Shell Size A Thread Class 2B 08 10 12 14 16 18 20 22 24 .438 - 28 UNEF .562 - 24 UNEF .688 - 24 UNEF .813 - 20 UNEF .938 - 20 UNEF 1.063 - 18 UNEF 1.188 - 18 UNEF 1.313 - 18 UNEF 1.438 - 18 UNEF B C Dia Max .860 .990 1.160 1.280 1.410 1.520 1.640 1.770 1.890 F Max (21.8) (25.1) (29.5) (32.5) (35.8) (38.6) (41.7) (45.0) (48.0) .870 .900 .920 .950 .980 .980 1.010 1.040 1.070 TABLE II: Shell Size and Cable Entry for Straight Configuration Only Shell Size E Dia Cable Entry Size 01 .010 (0.30) 08 10 12 14 16 18 20 22 24 N/A N/A .312 (7.9) .438 (11.1) .500 (12.7) .625 (15.9) .625 (15.9) .688 (17.5) .750 (19.1) (22.1) (22.9) (23.4) (24.1) (24.9) (24.9) (25.7) (26.4) (27.2) 1.160 1.190 1.210 1.240 1.260 1.270 1.300 1.330 1.350 (29.5) (30.2) (30.7) (31.5) (32.0) (32.3) (33.0) (33.8) (34.3) H Max 1.375 1.437 1.562 1.687 1.750 1.875 1.938 2.062 2.125 J Max (34.9) (36.5) (39.7) (42.8) (44.5) (47.6) (49.2) (52.4) (54.0) 1.375 1.437 1.562 1.687 1.750 1.875 1.938 2.062 2.125 (34.9) (36.5) (39.7) (42.8) (44.5) (47.6) (49.2) (52.4) (54.0) TABLE III: Shell Size and Cable Entry for 45 and 90 Configurations Only E Dia Cable Entry Size 02 .010 (0.30) .250 .312 .438 .562 .625 .750 .812 .938 1.000 G Max Shell Size K Dia Cable Entry Size 02 .010 (0.30) 08 10 12 14 16 18 20 22 24 N/A N/A .312 (7.9) .438 (11.1) .500 (12.7) .625 (15.9) .625 (15.9) .688 (17.5) .750 (19.1) (6.4) (7.9) (11.1) (14.3) (15.9) (19.1) (20.6) (23.8) (25.4) K Dia Cable Entry Size 03 .010 (0.30) .250 .312 .438 .562 .625 .750 .812 .938 1.000 (6.4) (7.9) (11.1) (14.3) (15.9) (19.1) (20.6) (23.8) (25.4) APPLICATION NOTES (c) 2013 Glenair, Inc. 1. Assembly identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Metric dimensions (mm) are in parentheses. 4. For use with AS85049/128 Bands. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-100 E-Mail: sales@glenair.com AS85049 AS85049/88, AS85049/89 and AS85049/90 Straight, 45 and 90 Banding Backshells with Self-Locking Coupling CONNECTOR DESIGNATOR: H -- = Detented N = Non-Detented MIL-DTL-38999 Series III and IV EN3645 M85049/88 N Basic Part Number M85049/88 = Straight M85049/89 = 45 M85049/90 = 90 17 P Shell Size (Table I) 02 Entry Size (Table I) B Finish (Table II) O-Ring Typ APPLICATION NOTES (c) 2013 Glenair, Inc. 1. Assembly identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Metric dimensions (mm) are in parentheses. 4. For use with AS85049/128 Bands. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-101 E-Mail: sales@glenair.com AS85049 AS85049/88, AS85049/89 and AS85049/90 Straight, 45 and 90 Banding Backshells with Self-Locking Coupling TABLE I: Shell Size, Cable Entry and Backshell Dimensions B Shell Size A Thread Class 2B 9 11 13 15 17 19 21 23 25 M12 X 1 - 6H M15 X 1 - 6H M18 X 1 - 6H M22 X 1 - 6H M25 X 1 - 6H M28 X 1 - 6H M31 X 1 - 6H M34 X 1 - 6H M37 X 1 - 6H E Dia Cable Entry Size 02 .010 (0.30) C Dia Max .860 .990 1.160 1.280 1.410 1.520 1.640 1.770 1.890 (21.8) (25.1) (29.5) (32.5) (35.8) (38.6) (41.7) (45.0) (48.0) N/A N/A .312 (7.9) .438 (11.1) .500 (12.7) .625 (15.9) .625 (15.9) .688 (17.5) .750 (19.1) E Dia Cable Entry Size 03 .010 (0.30) .250 .312 .438 .562 .625 .750 .812 .938 1.000 (6.4) (7.9) (11.1) (14.3) (15.9) (19.1) (20.6) (23.8) (25.4) F Max 1.010 1.030 1.060 1.080 1.110 1.120 1.150 1.170 1.200 (25.7) (26.2) (26.9) (27.4) (28.2) (28.4) (29.2) (29.7) (30.5) G Max 1.160 1.190 1.210 1.240 1.260 1.270 1.300 1.330 1.350 (29.5) (30.2) (30.7) (31.5) (32.0) (32.3) (33.0) (33.8) (34.3) H Max 1.375 1.437 1.562 1.687 1.750 1.875 1.938 2.062 2.125 (34.9) (36.5) (39.7) (42.8) (44.5) (47.6) (49.2) (52.4) (54.0) J Max 1.417 1.480 1.553 1.614 1.678 1.733 1.796 1.859 1.919 (36.0) (37.6) (39.4) (41.0) (42.6) (44.0) (45.6) (47.2) (48.7) TABLE II: Finish and Material Aluminum Composite G N P W X YP Z ZP (c) 2013 Glenair, Inc. Finish Description Not Available Electroless Nickel (Space Grade) M Electroless Nickel Cadmium Olive Drab over Electroless L Nickel, Selective Plating J Cadmium Olive Drab XC Nickel Fluorocarbon Polymer Pure Dense Electrodeposited YL Aluminum, Selective Plating ZC Zinc Nickel ZL Zinc Nickel, Selective Plating Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-102 E-Mail: sales@glenair.com AS85049 AS85049/91 and AS85049/92 Composite Strain Reliefs Self-Locking CONNECTOR DESIGNATOR: H MIL-DTL-38999 Series III & IV, EN3645 Basic Part Number M85049/91 = Straight M85049/92 = 90 M85049/92 Material and Finish Designator J = Composite (Conductive), Cadmium Olive Drab over Electroless Nickel M = Composite (Conductive) Electroless Nickel T = Composite (Non-Conductive) without Plating XC = Composite (Conductive) Nickel Fluorocarbon Polymer YC = Composite (Conductive) Pure Dense Electrodeposited Aluminum ZC = Composite (Conductive) Zinc-Nickel, Black N - = Detented N = Non-Detented A Thread Typ. 11 T Shell Size F C Dia Typ. J H Typ. G Typ. (See Note 3) K TABLE I: Shell Size, Cable Entry and Backshell Dimensions Shell Size 09 11 13 15 17 19 21 23 25 A Thread Class 2B M12 X 1 - 6H M15 X 1 - 6H M18 X 1 - 6H M22 X 1 - 6H M25 X 1 - 6H M28 X 1 - 6H M31 X 1 - 6H M34 X 1 - 6H M37 X 1 - 6H OC Max .858 (21.8) .984 (25.0) 1.157 (29.4) 1.280 (32.5) 1.406 (35.7) 1.516 (38.5) 1.642 (41.7) 1.768 (44.9) 1.890 (48.0) F Max .840 (21.3) .960 (24.4) 1.100 (27.9) 1.100 (27.9) 1.230 (31.2) 1.410 (35.8) 1.510 (38.4) 1.660 (42.2) 1.760 (44.7) G Max .98 (24.9) 1.05 (26.7) 1.20 (30.5) 1.30 (33.0) 1.42 (36.1) 1.52 (38.6) 1.64 (41.7) 1.77 (45.0) 1.89 (48.0) OH +.031 .219 (5.6) .264 (6.7) .344 (8.7) .460 (11.7) .545 (13.8) .615 (15.6) .698 (17.7) .700 (17.8) .850 (21.6) J Max 1.06 (26.9) 1.10 (27.9) 1.18 (30.0) 1.30 (33.0) 1.38 (35.1) 1.45 (36.8) 1.54 (39.1) 1.62 (41.1) 1.69 (42.9) .062 .875 .937 1.031 1.125 1.312 1.375 1.500 1.625 1.750 K (1.6) (22.2) (23.8) (26.2) (28.6) (33.3) (34.9) (38.1) (41.3) (44.5) APPLICATION NOTES 1. 2. 3. 4. (c) 2013 Glenair, Inc. Assembly to be identified with manufacturer's name and part number, space permitting. Cable Entry is measured with saddle bars closed and bottomed on clamp ears. For complete dimensions, see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-103 E-Mail: sales@glenair.com B AS85049 AS85049/93 Banding Split-Ring Basic Part Number Dash No. M85049/93 - 10 SAMPLE APPLICATION B Shrink Sleeve or Shrink Boot Split Ring Shield Pig Tail or Drain Wire Tape Wrap AS85049/128 Band Shield Sock Solder Sleeve AS85049/128 Band TABLE I: Reference for Connector Shell Size Dash No. 04 06 08 10 12 14 16 18 20 22 24 26 28 OA OB .010 (0.3) .030 (0.8) .25 .38 .50 .63 .75 .88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 (6.4) (9.7) (12.7) (16.0) (19.1) (22.4) (25.4) (28.7) (31.8) (35.1) (38.1) (41.4) (44.5) .36 .49 .61 .74 .86 .99 1.11 1.24 1.36 1.49 1.61 1.74 1.86 (9.1) (12.4) (15.5) (18.8) (21.8) (25.1) (28.2) (31.5) (34.5) (37.8) (40.9) (44.2) (47.2) .88 (22.4) Max B A .50 (12.7) Min. APPLICATION NOTES 1. 2. 3. 4. 5. Accomodates AS85049/128 Band Assembly identified with manufacturer's name and part number, space permitting. For complete dimensions, see the applicable Military Specification. Use with Glenair Banding Backshells and Braid Socks. Consult factory for specific application part numbers. Metric dimensions (mm) are in parentheses. Material - high grade engineering thermoplastic. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-104 E-Mail: sales@glenair.com Basic Part Number AS85049 AS85049/94 Mounting Flange, Full Perimeter A = Primer Coat Required M85049/94 - 10 - A B Shell Size B D A C A .040 (1.02) .003 (0.8) B Nut, Self-Locking, Clinch NASM 45938 Type, 4 Places TABLE I: Reference for Connector Shell Size A Shell Size Thread UNJC-3B .015 (.38) 8 10 12 14 16 18 20 22 24 25 4-40 4-40 4-40 4-40 4-40 4-40 4-40 4-40 6-32 6-32 .594 .719 .812 .906 .969 1.062 1.156 1.250 1.375 1.500 (15.1) (18.3) (20.6) (23.0) (24.6) (27.0) (29.4) (31.8) (34.9) (38.1) B Max .900 1.034 1.119 1.213 1.295 1.421 1.550 1.680 1.800 1.910 (22.9) (26.3) (28.4) (30.8) (32.9) (36.1) (39.4) (42.7) (45.7) (48.5) C .015 (.4) .570 .720 .845 .975 1.085 1.210 1.335 1.470 1.585 1.658 (14.5) (18.3) (21.5) (24.8) (27.6) (30.7) (33.9) (37.3) (40.3) (42.1) D Max .166 .166 .166 .166 .166 .166 .166 .166 .183 .183 (4.2) (4.2) (4.2) (4.2) (4.2) (4.2) (4.2) (4.2) (4.6) (4.6) APPLICATION NOTES 1. 2. 3. (c) 2013 Glenair, Inc. Assembly identified with manufacturer's name and part number, space permitting. For complete dimensions, see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-105 E-Mail: sales@glenair.com AS85049 AS85049/95 3/4 Perimeter Mounting Flange Basic Part Number A = Primer Coat Required M85049/95 - 10A - A B B D A Shell Size and Class C APPLICATION NOTES 1. 2. 3. E Assembly identified with manufacturer's name and part number, space permitting. For complete dimensions, see the applicable Military Specification. Metric dimensions (mm) are in parentheses. .040 (1.02) .003 (0.8) AB Nut, Self-Locking, Clinch NASM 45938 Type, 4 Places TABLE I: Reference for Connector Shell Size Shell Size & Class Thread UNJC-3B 3A 7A 8A 10A 10B 12A 12B 14A 14B 16A 16B 18A 18B 19A 20A 20B 22A 22B 24A 24B 25A 27A 28A 32A 36A 37A 61A 4-40 4-40 4-40 4-40 6-32 4-40 6-32 4-40 6-32 4-40 6-32 4-40 6-32 4-40 4-40 6-32 4-40 6-32 6-32 6-32 6-32 4-40 6-32 6-32 6-32 4-40 4-40 (c) 2013 Glenair, Inc. A .005 (0.1) .625 .719 .594 .719 .812 .812 .938 .906 1.031 .969 1.125 1.062 1.203 .906 1.156 1.297 1.250 1.375 1.500 1.375 1.500 .969 1.562 1.750 1.938 1.187 1.437 15.88 18.26 15.09 18.26 20.62 20.62 23.83 23.01 26.19 24.61 28.58 26.97 30.56 23.01 29.36 32.94 31.75 34.92 38.10 34.92 38.10 24.61 39.67 44.45 49.23 30.15 36.50 B Max .940 1.034 .900 1.034 1.202 1.119 1.327 1.213 1.421 1.295 1.515 1.421 1.593 1.207 1.550 1.703 1.680 1.753 1.906 1.800 1.906 1.270 2.015 2.327 2.515 1.515 1.827 C .015 (0.4) 23.88 26.26 22.86 26.26 30.53 28.42 33.71 30.81 36.09 32.89 38.48 36.09 40.46 30.66 39.37 43.26 42.67 44.53 48.41 45.72 48.41 32.26 51.18 59.11 63.88 38.48 46.41 .641 .688 .570 .720 .749 .855 .938 .984 1.031 1.094 1.125 1.220 1.234 .953 1.345 1.359 1.478 1.483 1.560 1.595 1.658 1.094 1.820 2.062 2.312 1.281 1.594 16.3 17.5 14.5 18.3 19.0 21.7 23.8 25.0 26.2 27.8 28.6 31.0 31.3 24.2 34.2 34.5 37.5 37.7 39.6 40.5 42.1 27.8 46.2 52.4 58.7 32.5 40.5 D Max .166 .166 .166 .166 .183 .166 .183 .166 .183 .166 .183 .166 .183 .166 .166 .183 .166 .183 .183 .183 .183 .166 .183 .183 .183 .166 .166 E .030 (0.8) 4.22 4.22 4.22 4.22 4.65 4.22 4.65 4.22 4.65 4.22 4.65 4.22 4.65 4.22 4.22 4.65 4.22 4.65 4.65 4.65 4.65 4.22 4.65 4.65 4.65 4.22 4.22 Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 .325 .433 .308 .433 .433 .530 .530 .624 .624 .687 .687 .780 .780 .620 .874 .865 .968 .907 1.000 1.031 1.125 .683 1.125 1.188 1.375 .874 1.062 8.25 11.00 7.82 11.00 11.00 13.46 13.46 15.85 15.85 17.45 17.45 19.81 19.81 15.75 22.20 21.97 24.59 23.04 125.40 126.19 128.58 17.35 128.58 130.18 134.92 22.20 26.97 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-106 Rev. 03/22/19 E-Mail: sales@glenair.com Basic Number AS85049 AS85049/96 Mounting Flange, 1/4 Perimeter A - Primer Coat Required M85049/96 - 10 - A Dash No. B Nut, Self-Locking, Clinch MIL-N-45938 Type, 2 Places D E F E C A B G .040 (1.0) .003 (0.1) TABLE I Dash No. Thread A UNJC-3B .003 (0.1) 3 7 8 10 12 14 16 18 19 20 22 24 25 27 28 32 36 37 61 (c) 2013 Glenair, Inc. 4-40 4-40 4-40 4-40 4-40 4-40 4-40 4-40 4-40 4-40 4-40 6-32 6-32 4-40 6-32 6-32 6-32 4-40 4-40 .625 (15.9) .719 (18.3) .594 (15.1) .719 (18.3) .812 (20.6) .906 (23.0) .969 (24.6) 1.062 (27.0) .906 (23.0) 1.156 (29.4) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) .969 (24.6) 1.562 (39.7) 1.750 (44.5) 1.938 (49.2) 1.187 (30.1) 1.437 (36.5) B .015 (0.4) C + .015 (.4) - .000 (.0) D .030 (0.8) E .005 (0.1) F (Ref) G Max .925 (23.5) 1.016 (25.8) .891 (22.6) 1.016 (25.8) 1.109 (28.2) 1.203 (30.6) 1.266 (32.2) 1.390 (35.3) 1.203 (30.6) 1.510 (38.4) 1.640 (41.7) 1.760 (44.7) 1.859 (47.2) 1.266 (32.2) 2.000 (50.8) 2.312 (58.7) 2.500 (63.5) 1.500 (38.1) 1.812 (46.0) .300 (7.6) .298 (7.6) .296 (7.5) .298 (7.6) .296 (7.5) .296 (7.5) .298 (7.6) .328 (8.3) .296 (7.5) .354 (9.0) .390 (9.9) .386 (9.8) .358 (9.1) .298 (7.6) .438 (11.1) .562 (14.3) .562 (14.3) .314 (8.0) .376 (9.6) .136 (3.5) .136 (3.5) .136 (3.5) .136 (3.5) .136 (3.5) .136 (3.5) .136 (3.5) .136 (3.5) .136 (3.5) .136 (3.5) .136 (3.5) .153 (3.9) .153 (3.9) .136 (3.5) .153 (3.9) .153 (3.9) .153 (3.9) .136 (3.5) .136 (3.5) .312 (7.92) .359 (9.12) .297 (7.54) .359 (9.12) .406 (10.31) .453 (11.51) .484 (12.29) .531 (13.49) .453 (11.51) .578 (14.68) .625 (15.88) .687 (17.45) .750 (19.05) .484 (12.29) .781 (19.84) .875 (22.23) .969 (24.61) .593 (15.06) .718 (18.24) .150 (3.81) .149 (3.78) .148 (3.76) .149 (3.78) .148 (3.76) .148 (3.76) .149 (3.78) .164 (4.17) .148 (3.76) .177 (4.50) .195 (4.95) .193 (4.90) .179 (4.55) .149 (3.78) .219 (5.56) .281 (7.14) .281 (7.14) .157 (3.99) .188 (4.78) .310 (7.87) .308 (7.82) .306 (7.77) .308 (7.82) .306 (7.77) .306 (7.77) .308 (7.82) .338 (8.59) .306 (7.77) .364 (9.25) .400 (10.16) .396 (10.06) .368 (9.35) .308 (7.82) .448 (11.38) .572 (14.53) .572 (14.53) .324 (8.23) .386 (9.80) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-107 E-Mail: sales@glenair.com AS85049 AS85049/103 Composite Straight RFI/EMI Shield-Sock Adapter with Detented or Non-Detented Self-Locking Coupling Nut CONNECTOR DESIGNATOR: H Product Series and Basic Part Number MIL-DTL-38999 Series III and IV EN3645 Shell Size (Table I) M85049/103 - 11 B N N = Non-Detented Self-Locking (Omit for Detented Self-Locking) (See Note 6) H F EMI Shroud A Thread B Braided Shield (See Note 5) Braid I.D. Ref J D (See Note 4) E .25 (6.4) Max Screw Extension Typ Anti-rotation Device (See Part Number Development) 0.125 (3.18) Drain Holes (Under Coupling) 3 Min Equally Spaced G 10.00 (254.0) Min Captivated Self-Locking Telescoping Screws & Washers - Typ APPLICATION NOTES 1. For complete dimensions see the applicable Military Specification. 2. Metric dimensions (mm) are in parentheses. 3. Glenair 600 Series backshell assembly tools are recommended for assembly and installation. 4. Cable entry is measured with saddle bars closed and bottomed on clamp ears. 5. For shield/splice termination use AS85049/93 split support ring. (c) 2013 Glenair, Inc. 6. Detented self-locking has a positive audible detented coupling. 7. Material/Finish: Clamp body, coupling nut, saddles - High grade engineering thermoplastic/N.A. Clamp hardware - CRES/passivated, silver plated, mfg option Anti-rotation device - Corrosion resistant material Braid - Copper/nickel plated Interface ring and shroud - Brass/nickel plated Braid retention device - See Table II Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-108 E-Mail: sales@glenair.com AS85049 AS85049/103 Composite Straight RFI/EMI Shield-Sock Adapter with Detented or Non-Detented Self-Locking Coupling Nut TABLE I: Shell Size and Dimensions A Thread Class 2B B Max C Max D .031 (0.79) See Note 4 E Min F Max G .030 (0.76) 09 M12 X 1 - 6H .858 (21.79) .98 (24.89) .265 (6.73) .229 (5.82) .939 (23.85) .375 (9.53) 11 M15 X 1 - 6H .984 (24.99) 1.05 (26.67) .310 (7.87) 13 M18 X 1 - 6H 1.157 (29.39) 1.20 (30.48) .390 (9.91) Shell Size Braid I.D. Ref Screw Size .750/.736 .264 (6.71) (19.05/18.69) .375 (9.53) 4-40 .274 (6.96) 1.059 (26.90) .375 (9.53) .875/.860 .390 (9.91) (22.23/21.84) .375 (9.53) 4-40 .354 (8.99) 1.199 (30.45) .406 (10.31) 1.000/.980 .504 (12.80) .500 (12.70) (25.40/24.89) 6-32 15 M22 X 1 - 6H 1.280 (32.51) 1.30 (33.02) .506 (12.85) .470 (11.94) 1.199 (30.45) .406 (10.31) 1.125/1.100 .630 (16.00) .500 (12.70) (31.75/31.09) 6-32 17 M25 X 1 - 6H 1.406 (35.71) 1.44 (36.58) .591 (15.01) .555 (14.10) 1.329 (33.76) .406 (10.31) 1.250/1.224 .756 (19.20 .781 (19.84) (31.75/31.09) 6-32 19 M28 X 1 - 6H 1.516 (38.51) 1.56 (39.62) .661 (16.79) .625 (15.88) 1.509 (38.33) .406 (10.31) 1.375/1.348 .843 (21.41) .781 (19.84) (34.93/34.24) 6-32 21 M31 X 1 - 6H 1.642 (41.71) 1.69 (42.93) .744 (18.90) .708 (17.98) 1.609 (40.87) .406 (10.31) 1.500/1.469 .969 (24.61) 1.000 (25.40) (38.10/37.31) 6-32 23 M34 X 1 - 6H 1.768 (44.91) 1.77 (44.96) .826 (20.98) .790 (20.07) 1.759 (44.68) .406 (10.31) 1.625/1.581 1.091 (27.71) 1.000 (25.40) (41.28/40.16) 6-32 25 M37 X 1 - 6H 1.890 (48.01) 1.89 (48.01) .896 (22.76) .860 (21.84) 1.859 (47.22) .406 (10.31) 1.750/1.690 1.217 (30.91) 1.250 (31.75) (44.45/42.93) 6-32 H Hex J Min Table II (Manufacturer's Option) (c) 2013 Glenair, Inc. Material Finish Aluminum Alloy Iridite per AMS-C-5541 Stainless Steel Passivated Copper Tin Plate Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-109 E-Mail: sales@glenair.com B AS85049 AS85049/104 Composite 45 RFI/EMI Shield-Sock Adapter with Detented or Non-Detented Self-Locking Coupling Nut CONNECTOR DESIGNATOR: H Product Series and Basic Part Number MIL-DTL-38999 Series III and IV EN3645 Shell Size (Table I) M85049/104 - 11 B N N = Non-Detented Self-Locking (Omit for Detented Self-Locking) (See Note 6) EMI Shroud A Thread H F G B J 10.00 (254.0) Min K Anti-Rotation Device (See Part Number Development) O.125 (3.18) Drain Holes 3 Min Equally Spaced Braided Shield (See Note 5) E Braid I.D. Ref C Captivated Self-locking Telescoping Screws - Typ .25 (6.4) Max Screw Extension, Typ D (See Note 4) APPLICATION NOTES 1. For complete dimensions see the applicable Military Specification. 2. Metric dimensions (mm) are in parentheses. 3. Glenair 600 Series backshell assembly tools are recommended for assembly and installation. 4. Cable entry is measured with saddle bars closed and bottomed on clamp ears. 5. For shield/splice termination use AS85049/93 split support ring. (c) 2013 Glenair, Inc. 6. Detented self-locking has a positive audible detented coupling. 7. Material/Finish: Clamp body, coupling nut, saddles - High grade engineering thermoplastic/N.A. Clamp hardware - CRES/passivated, silver plated, mfg option Anti-rotation device - Corrosion resistant material Braid - Copper/nickel plated Interface ring and shroud - Brass/nickel plated Braid retention device - See Table II Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-110 E-Mail: sales@glenair.com AS85049 AS85049/104 Composite 45 RFI/EMI Shield-Sock Adapter with Detented or Non-Detented Self-Locking Coupling Nut B TABLE I: Shell Size and Dimensions Shell Size A Thread Class 2B B Max C Max D .031 (0.79) See Note 4 E Min G .030 (0.76) F Max H Hex J Min K Max Braid I.D. Ref Screw Size 09 M12 X 1 - 6H .858 (21.79) .98 (24.89) .265 (6.73) .229 (5.82) 1.388 (35.26) .375 (9.53) .750/.736 .264 (6.71) .901 (22.89) .375 (9.53) (19.05/18.69) 4-40 11 M15 X 1 - 6H .984 (24.99) 1.05 (26.67) .310 (7.87) .274 (6.96) 1.428 (36.27) .375 (9.53) .875/.860 .390 (9.91) .964 (24.39) .375 (9.53) (22.23/21.84) 4-40 13 M18 X 1 - 6H 1.157 (29.39) 1.20 (30.48) .390 (9.91) .354 (8.99) 1.498 (38.05) .406 (10.31) 1.000/.980 .504 (12.80) 1.050 (26.67) .500 (12.70) (25.40/24.89) 6-32 15 M22 X 1 - 6H 1.280 (32.51) 1.30 (33.02) .506 (12.85) .470 (11.94) 1.548 (39.32) .406 (10.31) 1.125/1.100 .630 (16.00) 1.112 (28.24) .500 (12.70) (31.75/31.09) 6-32 17 M25 X 1 - 6H 1.406 (35.71) 1.44 (36.58) .591 (15.01) .555 (14.10) 1.648 (41.86) .406 (10.31) 1.250/1.224 .756 (19.20 1.175 (29.85) .781 (19.84) (31.75/31.09) 6-32 19 M28 X 1 - 6H 1.516 (38.51) 1.56 (39.62) .661 (16.79) .625 (15.88) 1.768 (44.91) .406 (10.31) 1.375/1.348 .843 (21.41) 1.230 (31.24) .781 (19.84) (34.93/34.24) 6-32 21 M31 X 1 - 6H 1.642 (41.71) 1.69 (42.93) .744 (18.90) .708 (17.98) 1.808 (45.92) .406 (10.31) 1.500/1.469 .969 (24.61) 1.293 (32.84) 1.000 (25.40) (38.10/37.31) 6-32 23 M34 X 1 - 6H 1.768 (44.91) 1.77 (44.96) .826 (20.98) .790 (20.07) 1.858 (47.19) .406 (10.31) 1.625/1.581 1.091 (27.71) 1.365 (34.67) 1.000 (25.40) (41.28/40.16) 6-32 25 M37 X 1 - 6H 1.890 (48.01) 1.89 (48.01) .896 (22.76) .860 (21.84) 1.898 (48.21 .406 (10.31) 1.750/1.690 1.217 (30.91) 1.417 (35.99) 1.250 (31.75) (44.45/42.93) 6-32 Table II (Manufacturer's Option) (c) 2013 Glenair, Inc. Material Finish Aluminum Alloy Iridite per AMS-C-5541 Stainless Steel Passivated Copper Tin Plate Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-111 E-Mail: sales@glenair.com AS85049 AS85049/105 Composite 90 RFI/EMI Shield-Sock Adapter with Detented or Non-Detented Self-Locking Coupling Nut CONNECTOR DESIGNATOR: H Product Series and Basic Part Number MIL-DTL-38999 Series III and IV EN3645 Shell Size (Table I) M85049/105 - 11 B N N = Non-Detented Self-Locking (Omit for Detented Self-Locking) (See Note 6) H EMI Shroud F A Thread B J G K Anti-rotation Device (See Part Number Development) O.125 (3.18) Drain Holes 3 Min Equally Spaced 10.00 (254.0) Min Braided Shield (See Note 5) Braid I.D. Ref D (See Note 4) E .25 (6.4) Max Screw Extension Typ (c) 2013 Glenair, Inc. C Captivated Self-locking Telescoping Screws & Washers - Typ Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-112 E-Mail: sales@glenair.com AS85049 AS85049/105 Composite 90 RFI/EMI Shield-Sock Adapter with Detented or Non-Detented Self-Locking Coupling Nut TABLE I: Shell Size and Dimensions Shell Size A Thread Class 2B B Max C Max D .031 (0.79) See Note 4 E Min G .030 (0.76) F Max H Hex J Min K Max Braid I.D. Ref Screw Size .94 (23.88) 09 M12 X 1 - 6H .858 (21.79) .98 (24.89) .265 (6.73) .229 (5.82) 1.128 (28.65) .375 (9.53) .750/.736 .264 (6.71) (19.05/18.69) .375 (9.53) 4-40 11 M15 X 1 - 6H .984 (24.99) 1.05 (26.67) .310 (7.87) .274 (6.96) 1.168 (29.67) .375 (9.53) .875/.860 .390 (9.91) 1.00 (25.40) .375 (9.53) (22.23/21.84) 4-40 13 M18 X 1 - 6H 1.157 (29.39) 1.20 (30.48) .390 (9.91) .354 (8.99) 1.248 (31.70) .406 (10.31) 1.000/.980 .504 (12.80) 1.12 (28.45) .500 (12.70) (25.40/24.89) 6-32 15 M22 X 1 - 6H 1.280 (32.51) 1.30 (33.02) .506 (12.85) .470 (11.94) 1.368 (34.75) .406 (10.31) 1.125/1.100 .630 (16.00) 1.19 (30.23) .500 (12.70) (31.75/31.09) 6-32 17 M25 X 1 - 6H 1.406 (35.71) 1.44 (36.58) .591 (15.01) .555 (14.10) 1.448 (36.78) .406 (10.31) 1.250/1.224 .756 (19.20 1.37 (34.80) .781 (19.84) (31.75/31.09) 6-32 19 M28 X 1 - 6H 1.516 (38.51) 1.56 (39.62) .661 (16.79) .625 (15.88) 1.528 (38.81) .406 (10.31) 1.375/1.348 .843 (21.41) 1.44 (36.58) .781 (19.84) (34.93/34.24) 6-32 21 M31 X 1 - 6H 1.642 (41.71) 1.69 (42.93) .744 (18.90) .708 (17.98) 1.648 (41.86) .406 (10.31) 1.500/1.469 .969 (24.61) 1.56 (39.62) 1.000 (25.40) (38.10/37.31) 6-32 23 M34 X 1 - 6H 1.768 (44.91) 1.77 (44.96) .826 (20.98) .790 (20.07) 1.688 (42.88) .406 (10.31) 1.625/1.581 1.091 (27.71) 1.69 (42.93) 1.000 (25.40) (41.28/40.16) 6-32 25 M37 X 1 - 6H 1.890 (48.01) 1.89 (48.01) .896 (22.76) .860 (21.84) 1.758 (44.65) .406 (10.31) 1.750/1.690 1.217 (30.91) 1.81 (45.97) 1.250 (31.75) (44.45/42.93) 6-32 Table II (Manufacturer's Option) Material Finish Aluminum Alloy Iridite per AMS-C-5541 Stainless Steel Passivated Copper Tin Plate APPLICATION NOTES 1. For complete dimensions see the applicable Military Specification. 2. Metric dimensions (mm) are in parentheses. 3. Glenair 600 Series backshell assembly tools are recommended for assembly and installation. 4. Cable entry is measured with saddle bars closed and bottomed on clamp ears. 5. For shield/splice termination use AS85049/93 split support ring. (c) 2013 Glenair, Inc. 6. Detented self-locking has a positive audible detented coupling. 7. Material/Finish: Clamp body, coupling nut, saddles - High grade engineering thermoplastic/N.A. Clamp hardware - CRES/passivated, silver plated, mfg option Anti-rotation device - Corrosion resistant material Braid - Copper/nickel plated Interface ring and shroud - Brass/nickel plated Braid retention device - See Table II Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-113 E-Mail: sales@glenair.com B AS85049 AS85049/109 Straight RFI/EMI Shield-Sock Metal Shrink Boot Adapter with Optional Detented or Non-Detented Self-Locking or Non-Self-Locking Coupling Nut CONNECTOR DESIGNATOR: B A AS50151 Series AS34001 MIL-DTL-26482 Series II AS81703 Series III MIL-DTL-83723 Series I & III 40M39569, DEF 5326-3 EN 2997, EN 3646 ESC 10, ESC 11, LN 29504 NFC93422 Series HE302 PAN 6432-1, PAN 6432-2 PATT 602 Product Series and Basic Part Number Shell Size (Table I) M85049/109 S Shield Finish (Table IV) 10 T S = Detented, Self-Locking - = Non-Self-Locking (Use Dash) N = Non-Detented, Self-Locking Entry Size (Table II) W Drain Hole (Omit for None) 03 - 6 D Braid Length 1 Inch Increments, 6" Min., 18" Max Finish (Table III) See Note 9 Coupling Nut 1.19 (30.2) Length .50 (12.7) A Thread B Z W See Note 5 Marking Location Optional Y Single Layer Shield Knurl Style Mfr Option - Typ See Note 8 .075 (1.9) (Ref) .140 (3.56) .130 (3.30) Adapter Body (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-114 E-Mail: sales@glenair.com AS85049 AS85049/109 Straight RFI/EMI Shield-Sock Metal Shrink Boot Adapter with Optional Detented or Non-Detented Self-Locking or Non-Self-Locking Coupling Nut TABLE II: Entry Size and Dimensions TABLE I: Shell Size, Entry Size, Thread and Dimensions Shell Size Accessory Shell Size Code Allowable Cable Entry Size 03 01 3 - 08 01 - 10 01-03 12 01-05 14 02-06 16 18 Shell Size Shell Size A Thread Class 2B B Max Diameter - 9/16-24 UNEF .855 (22.48) 8 8S 1/2-20 UNF .885 (22.48) - 10 10S & 10SL 5/8-24 UNEF 7 12 12S & 12 3/4-20 UNEF 12 14 14S & 14 04-08 19 16 16S & 16 05-09 27 18 18 20 07-11 37 20 20 22 09-13 - 22 24 11-14 - 24 MIL-DTL-26482, Series II MIL-DTL-5015, AS81703, Series III MIL-DTL-83723, Series III Series I and II (Ref) (Ref) (Ref) 01 .250 (6.4) 1.010 (25.65) 02 1.135 (28.83) 03 7.8-20 UNEF 1.260 (32.00) 1-20 UNEF 1 1/16-18 UNEF .560 (14.2) .312 (7.9) .044 (1.12) .630 (16.0) .375 (9.5) .044 (1.12) .690 (17.5) 04 .438 (11.1) .044 (1.12) .750 (19.1) 1.385 (35.18) 05 .500 (12.7) .044 (1.12) .820 (20.8) 1.510 (38.35) 06 .562 (14.3) .044 (1.12) .890 (22.6) 1 3/16-18 UNEF 1.635 (41.53) 07 .625 (15.9) .044 (1.12) .950 (24.1) 22 1 5/16-18 UNEF 1.760 (44.70) 08 .688 (17.5) .044 (1.12) 1.020 (25.9) 24 1 7/16-18 UNEF 1.885 (47.88) 09 .750 (19.1) .069 (1.75) 1.120 (28.4) 10 .812 (20.6) .069 (1.75) 1.200 (30.5) 11 .875 (22.2) .069 (1.75) 1.270 (32.3) 12 .938 (23.8) .069 (1.75) 1.260 (32.0) 13 1.000 (25.4) .069 (1.75) 1.370 (34.8) 14 1.125 (28.6) .069 (1.75) 1.470 (37.3) 15 1,250 (31.8) .069 (1.75) 1.600 (40.6) 16 1.375 (34.9) .069 (1.75) 1.710 (43.4) 17 1.500 (38.1) .086 (2.18) 1.840 (46.7) 18 1.625 (41.3) .086 (2.18) 2.000 (50.8) 19 1.750 (44.5) .086 (2.18) 2.120 (53.8) 14-16 - - 28 1 3/4-18 UNS 2.135 (54.23) 32 16-17 - - 32 2-18 UNS 2.395 (60.83) 36 17-19 - - 36 2 1/4-16 UN 2.635 (66.93) 40 19-21 - - 40 2 1/2-16 UN 2.885 (73.28) 44 21-23 - - 44 2 3/4-16 UN 3.135 (76.63) 48 23-25 - - 48 61 12-14 61 - - Symbol Finish z Max .044 (1.12) 28 Table III: Symbol and Finish Y Entry W +.008 (.20) Size .020 (.51) -.000 (.00) 3-16 UN 3.385 (85.98) 1 1/2-18 UNEF 1.885 (47.88) Table IV: Symbol and Finish Symbol Finish N Electroless Nickel K Nickel Plate 20 1.875 (47.6) .086 (2.18) 2.270 (57.7) W Cadmium/Olive Drab over Electroless Nickel (1000 Hour Salt Spray) T Tin Plate 21 2.000 (50.8) .086 (2.18) 2.440 (62.0) X Nickel Flurocarbon Polymer 22 2.125 (54.0) .086 (2.18) 2.600 (66.0) Z Zinc Nickel 23 2.250 (57.2) .086 (2.18) 2.750 (69.9) 24 2.375 (60.3) .086 (2.18) 2.900 (73.7) 25 2.500 (63.5) .086 (2.18) 3.060 (77.7) Table V: (Manufacturer's Option) Material Finish Copper Tin Plate Stainless Steel Passivated APPLICATION NOTES 1. Metric equivalents are given for general information only and are based on 1.000 inch (25.40 mm). 2. Dimensions are in inches and apply after plating. Accessory configuration is optional within the specified dimension envelope. 3. Adapter length is measured from the bottom of the accessory teeth to the adapter that is covered by the braid, The adapter surface under the braid shall be ribbed knurled or have a surface roughness of .125 R minimum in accordance with ANSI B46.1. 4. 5. Pig tail terminated braid material shall be in accordance with TableIV. Braid length is defined by Note 1 as shown in the part or indentifying number (PIN). Termination band configuration is not controlled. Band with buckle may exceed the "Z" dimension (See Table II) provided the band does not interfere with boot attachment, band material (c) 2013 Glenair, Inc. shall be specified as in Table V. 6. Shrink boot (when required) shall be as specified in AS5258. 7. Termination of rthe accessory shield with harness shield may be performed with a AS85049/93 shield support ring or similar split ring accessory types. 8. Three (3) holes equally spaced shall be provided and accommodate .020 (.51) maximum safety wire for the nonself-locking coupling configuration. 9. Drain holes will be provided with a.125 (3.2 mm) diameter, 4 places equally spaces (optional, see part number development). 10. Material/Finish: Adapter, coupling nut - Al alloy/See Table III Band - See Table V, manufacturer's option Braid - Copper/See Table IV Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-115 E-Mail: sales@glenair.com B AS85049 AS85049/111 90 RFI/EMI Shield-Sock Shrink Boot Adapter with Optional Self-Locking Coupling Nut CONNECTOR DESIGNATOR: B A Product Series and Specification Sheet AS50151 Series AS34001 MIL-DTL-26482 Series II AS81703 Series III MIL-DTL-83723 Series I & III 40M39569, DEF 5326-3 EN 2997, EN 3646 ESC 10, ESC 11, LN 29504 NFC93422 Series HE302 PAN 6432-1, PAN 6432-2 PATT 602 Shield Finish (Table IV) Shell Size (Table I) M85049/111 S 10 S = Detented, Self-Locking - = Non-Self-Locking (Use Dash) N = Non-Detented, Self-Locking T Entry Size (Table II) W Drain Hole (Omit for None) 03 - 6 Finish (Table III) D Braid Length 1 Inch Increments, 6" Min., 18" Max See Note 9 Coupling Nut J Max Configuration Optional A Thread Adapter Body B .140 (3.56) .130 (3.30) H Marking Location Optional Knurl Style Mfr Option - Typ .075 (1.9) (Ref) See Note 8 Length .50 (12.7) See Note 5 Single Layer Shield W Y Z (c) 2013 Glenair, Inc. TABLE II: Entry Size and Dimensions Y Entry W +.008 (.20) Size .020 (.51) -.000 (.00) 01 .250 (6.4) z Max .044 (1.12) .560 (14.2) 02 .312 (7.9) .044 (1.12) .630 (16.0) 03 .375 (9.5) .044 (1.12) .690 (17.5) 04 .438 (11.1) .044 (1.12) .750 (19.1) 05 .500 (12.7) .044 (1.12) .820 (20.8) .890 (22.6) 06 .562 (14.3) .044 (1.12) 07 .625 (15.9) .044 (1.12) .950 (24.1) 08 .688 (17.5) .044 (1.12) 1.020 (25.9) 09 .750 (19.1) .069 (1.75) 1.120 (28.4) 10 .812 (20.6) .069 (1.75) 1.200 (30.5) 11 .875 (22.2) .069 (1.75) 1.270 (32.3) 12 .938 (23.8) .069 (1.75) 1.260 (32.0) 13 1.000 (25.4) .069 (1.75) 1.370 (34.8) 14 1.125 (28.6) .069 (1.75) 1.470 (37.3) 1.600 (40.6) 15 1,250 (31.8) .069 (1.75) 16 1.375 (34.9) .069 (1.75) 1.710 (43.4) 17 1.500 (38.1) .086 (2.18) 1.840 (46.7) 18 1.625 (41.3) .086 (2.18) 2.000 (50.8) 19 1.750 (44.5) .086 (2.18) 2.120 (53.8) 20 1.875 (47.6) .086 (2.18) 2.270 (57.7) 21 2.000 (50.8) .086 (2.18) 2.440 (62.0) 22 2.125 (54.0) .086 (2.18) 2.600 (66.0) 23 2.250 (57.2) .086 (2.18) 2.750 (69.9) 24 2.375 (60.3) .086 (2.18) 2.900 (73.7) 25 2.500 (63.5) .086 (2.18) 3.060 (77.7) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-116 E-Mail: sales@glenair.com AS85049 AS85049/111 90 RFI/EMI Shield-Sock Shrink Boot Adapter with Optional Self-Locking Coupling Nut TABLE I: Shell Size, Entry Size, Thread and Dimensions Accessory Shell Size Code Allowable Cable Entry Size Shell Size Shell Size Shell Size MIL-DTL-26482, Series II MIL-DTL-5015, AS81703, Series III MIL-DTL-83723, Series III Series I and II (Ref) (Ref) (Ref) A Thread Class 2B B Max Diameter H Max J Max 03 01 3 - - 9/16-24 UNEF .855 (22.48) 1.730 (43.94) 1.120 (28.45) 08 01 - 8 8S 1/2-20 UNF .885 (22.48) 1.730 (43.94) 1.120 (28.45) 10 01-03 - 10 10S & 10SL 5/8-24 UNEF 1.010 (25.65) 1.850 (46.99) 1.250 (31.75) 12 01-05 7 12 12S & 12 3/4-20 UNEF 1.135 (28.83) 1.870 (47.50) 1.380 (35.05) 14 02-06 12 14 14S & 14 7.8-20 UNEF 1.260 (32.00) 1.940 (49.28) 1.440 (36.58) 16 04-08 19 16 16S & 16 1-20 UNEF 1.385 (35.18) 2.030 (51.56) 1.560 (39.62) 18 05-09 27 18 18 1 1/16-18 UNEF 1.510 (38.35) 2.200 (55.88) 1.750 (44.45) 20 07-11 37 20 20 1 3/16-18 UNEF 1.635 (41.53) 2.200 (55.88) 1.750 (44.45) 22 09-13 - 22 22 1 5/16-18 UNEF 1.760 (44.70) 2.310 (58.67) 2.000 (50.80) 24 11-14 - 24 24 1 7/16-18 UNEF 1.885 (47.88) 2.310 (58.67) 2.000 (50.80) 28 14-16 - - 28 1 3/4-18 UNS 2.135 (54.23) 2.480 (62.99) 2.250 (57.15) 32 16-17 - - 32 2-18 UNS 2.395 (60.83) 2.730 (69.34) 2.750 (69.85) 36 17-19 - - 36 2 1/4-16 UN 2.635 (66.93) 2.730 (69.34) 3.125 (79.38) 40 19-21 - - 40 2 1/2-16 UN 2.885 (73.28) 2.880 (73.15) 4.125 (104.77) 44 21-23 - - 44 2 3/4-16 UN 3.135 (76.63) 3.000 (76.20) 4.125 (104.77) 48 23-25 - - 48 3-16 UN 61 12-14 61 - - 1 1/2-18 UNEF Table III: Symbol and Finish Symbol Finish 3.385 (85.98) 3.120 (79.25) 4.125 (104.77) 1.885 (47.88) 2.380 (60.45) Table IV: Symbol and Finish Symbol 2.250 (57.15) Table V: (Manufacturer's Option) Finish Material Finish N Electroless Nickel K Nickel Plate Copper Tin Plate W Cadmium/Olive Drab over Electroless Nickel (1000 Hour Salt Spray) T Tin Plate Stainless Steel Passivated X Nickel Flurocarbon Polymer Z Zinc Nickel APPLICATION NOTES 1. Metric equivalents are given for general information only and are based on 1.000 inch (25.40 mm). 2. Dimensions are in inches and apply after plating. Accessory configuration is optional within the specified dimension envelope. 3. Adapter length is measured from the bottom of the accessory teeth to the adapter that is covered by the braid, The adapter surface under the braid shall be ribbed knurled or have a surface roughness of .125 R minimum in accordance with ANSI B46.1. 4. 5. Pig tail terminated braid material shall be in accordance with TableIV. Braid length is defined by Note 1 as shown in the part or indentifying number (PIN). Termination band configuration is not controlled. Band with buckle may exceed the "Z" dimension (See Table II) provided the band does not interfere with boot attachment, band material (c) 2013 Glenair, Inc. shall be specified as in Table V. 6. Shrink boot (when required) shall be as specified in AS5258. 7. Termination of rthe accessory shield with harness shield may be performed with a AS85049/93 shield support ring or similar split ring accessory types. 8. Three (3) holes equally spaced shall be provided and accommodate .020 (.51) maximum safety wire for the nonself-locking coupling configuration. 9. Drain holes will be provided with a.125 (3.2 mm) diameter, 4 places equally spaces (optional, see part number development). 10. Material/Finish: Adapter, coupling nut - Al alloy/See Table III Band - See Table V, manufacturer's option Braid - Copper/See Table IV Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-117 E-Mail: sales@glenair.com B AS85049 AS85049/112 Straight RFI/EMI Shield-Sock Shrink Boot Adapter with Optional Self-Locking Coupling Nut CONNECTOR DESIGNATOR: F MIL-DTL-38999 Series I and II Product Series and Specification Sheet Shell Size (Table I) M85049/112 B S Shield Finish (Table IV) 10 S = Detented, Self-Locking - = Non-Self-Locking (Use Dash) N = Non-Detented, Self-Locking T Entry Size (Table II) W Drain Hole (Omit for None) 03 - 6 D Braid Length 1 Inch Increments, 6" Min., 18" Max Finish (Table III) See Note 9 O-Ring 1.19 (30.2) Max Length .50 (12.7) A Thread Z W B See Note 5 Marking Location Optional Y Single Layer Shield Knurl Style Mfr Option - Typ .075 (1.9) (Ref) See Note 8 .140 (3.56) .130 (3.30) Coupling Nut Adapter Body (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-118 E-Mail: sales@glenair.com AS85049 AS85049/112 Straight RFI/EMI Shield-Sock Shrink Boot Adapter with Optional Self-Locking Coupling Nut TABLE I: Shell Size, Entry Size, Thread and Dimensions Accessory Shell Size Code Series I Shell Size (Ref) Series II Shell Size (Ref) A Thread Class 2B B Max Diameter TABLE II: Entry Size and Dimensions Allowable Cable Entry Size Y Entry W +.008 (.20) Size .020 (.51) -.000 (.00) Z Max 08 9 8 7/16-28 UNEF .858 (21.79) 01 10 11 10 9/16-24 UNEF .984 (24.99) 01-03 12 01-05 01 .044 (1.12) 13 11/16-24 UNEF 1.157 (29.39) .250 (6.4) 12 .312 (7.9) .044 (1.12) .630 (16.0) 14 15 14 13/16-20 UNEF 1.279 (32.49) 02 03-07 .375 (9.5) .044 (1.12) .690 (17.5) 16 17 16 15/16-20 UNEF 1.406 (35.71) 03 05-09 .438 (11.1) .044 (1.12) .750 (19.1) 18 19 18 1 1/16-18 UNEF 1.516 (38.51) 04 06-10 .500 (12.7) .044 (1.12) .820 (20.8) 21 20 1 3/16-18 UNEF 1.642 (41.71) 05 20 08-12 .562 (14.3) .044 (1.12) .890 (22.6) 23 22 1 5/16-18 UNEF 1.768 (44.91) 06 22 09-13 .625 (15.9) .044 (1.12) .950 (24.1) 24 25 24 1 7/16-18 UNEF 1.889 (47.98) 07 10-14 08 .688 (17.5) .044 (1.12) 1.020 (25.9) 09 .750 (19.1) .069 (1.75) 1.120 (28.4) 10 .812 (20.6) .069 (1.75) 1.200 (30.5) 11 .875 (22.2) .069 (1.75) 1.270 (32.3) 12 .938 (23.8) .069 (1.75) 1.260 (32.0) 13 1.000 (25.4) .069 (1.75) 1.370 (34.8) 14 1.125 (28.6) .069 (1.75) 1.470 (37.3) Table III: Symbol and Finish Symbol Finish Table IV: Symbol and Finish Symbol .560 (14.2) Table V: (Manufacturer's Option) Finish Material Finish N Electroless Nickel K Nickel Plate Copper Tin Plate W Cadmium/Olive Drab over Electroless Nickel (1000 Hour Salt Spray) T Tin Plate Stainless Steel Passivated X Nickel Flurocarbon Polymer Z Zinc Nickel APPLICATION NOTES 1. Metric equivalents are given for general information only and are based on 1.000 inch (25.40 mm). 2. Dimensions are in inches and apply after plating. Accessory configuration is optional within the specified dimension envelope. 3. Adapter length is measured from the bottom of the accessory teeth to the adapter that is covered by the braid, The adapter surface under the braid shall be ribbed knurled or have a surface roughness of .125 R minimum in accordance with ANSI B46.1. 4. Pig tail terminated braid material shall be in accordance with TableIV. Braid length is defined by Note 1 as shown in the part or indentifying number (PIN). 5. Termination band configuration is not controlled. Band with buckle may exceed the "Z" dimension (See Table II) provided the band does not interfere with boot attachment, band material (c) 2013 Glenair, Inc. shall be specified as in Table V. 6. Shrink boot (when required) shall be as specified in AS5258. 7. Termination of the accessory shield with harness shield may be performed with a AS85049/93 shield support ring or similar split ring accessory types. 8. Three (3) holes equally spaced shall be provided and accommodate .020 (.51) maximum safety wire for the nonself-locking coupling configuration. 9. Drain holes will be provided with a.125 (3.2 mm) diameter, 4 places equally spaces (optional, see part number development). O-Ring not required when drain hole option is specified. 10. Material/Finish: Adapter, coupling nut - Al alloy/See Table III Band - See Table V, manufacturer's option Braid - Copper/See Table IV Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-119 E-Mail: sales@glenair.com B AS85049 AS85049/114 90 RFI/EMI Shield-Sock Shrink Boot Adapter with Detented or Non-Detented Self-Locking or Non Self-Locking Coupling Nut CONNECTOR DESIGNATOR: F Product Series and Specification Sheet MIL-DTL-38999 Series I & II 40M38277, PAN 6433-1 PATT 614, PATT 616 NFC93422 Series HE308 & HE309 Shield Finish (Table IV) M85049/114 B S S = Detented, Self-Locking - = Non-Self-Locking (Use Dash) N = Non-Detented, Self-Locking 10 Shell Size (Table I) T Entry Size (Table II) W Drain Hole (Omit for None) 03 - 6 Finish (Table III) D Braid Length 1 Inch Increments, 6" Min., 18" Max See Note 9 O-Ring J Configuration Optional A Thread Elbow Body B .140 (3.56) .130 (3.30) Marking Location H Optional Knurl Style Mfr Option - Typ Coupling Nut Length .50 (12.7 ) See Note 5 Single Layer Shield W Y Z (c) 2013 Glenair, Inc. Y Entry W +.008 (.20) Size .020 (.51) -.000 (.00) .075 (1.9) (Ref ) See Note 8 TABLE II: Entry Size and Dimensions Z Max 01 .250 (6.4) .044 (1.12) .560 (14.2) 02 .312 (7.9) .044 (1.12) .630 (16.0) 03 .375 (9.5) .044 (1.12) .690 (17.5) 04 .438 (11.1) .044 (1.12) .750 (19.1) 05 .500 (12.7) .044 (1.12) .820 (20.8) 06 .562 (14.3) .044 (1.12) .890 (22.6) 07 .625 (15.9) .044 (1.12) .950 (24.1) 08 .688 (17.5) .044 (1.12) 1.020 (25.9) 09 .750 (19.1) .069 (1.75) 1.120 (28.4) 10 .812 (20.6) .069 (1.75) 1.200 (30.5) 11 .875 (22.2) .069 (1.75) 1.270 (32.3) 12 .938 (23.8) .069 (1.75) 1.260 (32.0) 13 1.000 (25.4) .069 (1.75) 1.370 (34.8) 14 1.125 (28.6) .069 (1.75) 1.470 (37.3) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-120 E-Mail: sales@glenair.com AS85049 AS85049/114 90 RFI/EMI Shield-Sock Shrink Boot Adapter with Detented or Non-Detented Self-Locking or Non Self-Locking Coupling Nut TABLE I: Shell Size, Entry Size, Thread and Dimensions Accessory Shell Size Code Series I Shell Size (Ref) Series II Shell Size (Ref) A Thread Class 2B B Max Diameter H Max Allowable Cable Entry Size J Max 08 9 8 7/16-28 UNEF .858 (21.79) 1.730 (43.94) 1.070 (27.18) 01 10 11 10 9/16-24 UNEF .984 (24.99) 1.850 (46.99) 1.190 (30.23) 01-03 12 13 12 11/16-24 UNEF 1.157 (29.39) 1.870 (47.50) 1.320 (33.53) 01-05 14 15 14 13/16-20 UNEF 1.279 (32.49) 1.940 (49.28) 1.440 (36.58) 03-07 16 17 16 15/16-20 UNEF 1.406 (35.71) 2.030 (51.56) 1.570 (39.88) 05-09 18 19 18 1 1/16-18 UNEF 1.516 (38.51) 2.200 (55.88) 1.750 (44.45) 06-10 20 21 20 1 3/16-18 UNEF 1.642 (41.71) 2.200 (55.88) 1.750 (44.45) 08-12 22 23 22 1 5/16-18 UNEF 1.768 (44.91) 2.310 (58.67) 2.000 (50.80) 09-13 24 1 7/16-18 UNEF 1.889 (47.98) 2.310 (58.67) 2.000 (50.80) 10-14 24 25 Table III: Symbol and Finish Symbol Finish Table IV: Symbol and Finish Symbol B Table V: (Manufacturer's Option) Finish Material Finish N Electroless Nickel K Nickel Plate Copper Tin Plate W Cadmium/Olive Drab over Electroless Nickel (1000 Hour Salt Spray) T Tin Plate Stainless Steel Passivated X Nickel Flurocarbon Polymer Z Zinc Nickel APPLICATION NOTES 1. Metric equivalents are given for general information only and are based on 1.000 inch (25.40 mm). 2. Dimensions are in inches and apply after plating. Accessory configuration is optional within the specified dimension envelope. 3. Adapter length is measured from the bottom of the accessory teeth to the adapter that is covered by the braid, The adapter surface under the braid shall be ribbed knurled or have a surface roughness of .125 R minimum in accordance with ANSI B46.1. 4. Pig tail terminated braid material shall be in accordance with Table IV. Braid length is defined by Note 1 as shown in the part or indentifying number (PIN). 5. Termination band configuration is not controlled. Band with buckle may exceed the "Z" dimension (See Table II) provided the band does not interfere with boot attachment, band material (c) 2013 Glenair, Inc. shall be specified as in Table V. 6. Shrink boot (when required) shall be as specified in AS5258. 7. Termination of rthe accessory shield with harness shield may be performed with a AS85049/93 shield support ring or similar split ring accessory types. 8. Three (3) holes equally spaced shall be provided and accommodate .020 (.51) maximum safety wire for the non-selflocking coupling configuration. 9. Drain holes will be provided with a.125 (3.2 mm) diameter, 4 places equally spaces (optional, see part number development). O-Ring not required when drain hole option is specified. 10. Material/Finish: Adapter, coupling nut - Al alloy/See Table III Band - See Table V, manufacturer's option Braid - Copper/See Table IV Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-121 E-Mail: sales@glenair.com AS85049 AS85049/115 Straight RFI/EMI Shield-Sock Shrink Boot Adapter with Optional Self-Locking Coupling Nut CONNECTOR DESIGNATOR: H Product Series and Basic Part Number MIL-DTL-38999 Series III and IV EN3645 M85049/115 B Shell Size (Table I) S Shield Finish (Table IV) 11 T S = Detented, Self-Locking - = Non-Self-Locking (Use Dash) N = Non-Detented, Self-Locking Entry Size (Table II) W 03 - 6 Drain Hole (Omit for None) D Braid Length 1 Inch Increments, 6" Min., 18" Max Finish (Table III) Drain Holes (See Note 6) O-Ring (See Note 6) 1.32 (33.5) Max Length .50 (12.7) A Thread Z W B Y Knurl Style Mfr Option - Typ Single Layer Shield Wire Holes (See Note 5) Coupling Nut Adapter Body (c) 2013 Glenair, Inc. Termination Band (See Note 3) .075 (1.9) Ref .140 (3.56) .130 (3.30) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-122 E-Mail: sales@glenair.com AS85049 AS85049/115 Straight RFI/EMI Shield-Sock Shrink Boot Adapter with Optional Self-Locking Coupling Nut TABLE I: Shell Size and Dimensions TABLE II: Entry Size and Dimensions Shell Size A Thread Class 2B B Max Diameter Allowable Cable Entry Size 09 M12 X 1 - 6H .858 (21.79) 01 11 M15 X 1 - 6H .984 (24.99) 01-03 13 M18 X 1 - 6H 1.157 (29.39) 01-05 15 M22 X 1 - 6H 1.279 (32.49) 03-07 17 M25 X 1 - 6H 1.406 (35.71) 05-09 19 M28 X 1 - 6H 1.516 (38.51) 06-10 21 M31 X 1 - 6H 1.642 (41.71) 08-12 23 M34 X 1 - 6H 1.768 (44.91) 09-13 25 M37 X 1 - 6H 1.889 (47.98) 10-14 Table III: Symbol and Finish Symbol Finish Y Entry W +.008 (.20) Size .020 (.51) -.000 (.00) 01 .250 (6.4) .044 (1.12) .560 (14.2) 02 .312 (7.9) .044 (1.12) .630 (16.0) 03 .375 (9.5) .044 (1.12) .690 (17.5) 04 .438 (11.1) .044 (1.12) .750 (19.1) 05 .500 (12.7) .044 (1.12) .820 (20.8) 06 .562 (14.3) .044 (1.12) .890 (22.6) 07 .625 (15.9) .044 (1.12) .950 (24.1) 08 .688 (17.5) .044 (1.12) 1.020 (25.9) 09 .750 (19.1) .069 (1.75) 1.120 (28.4) 10 .812 (20.6) .069 (1.75) 1.200 (30.5) 11 .875 (22.2) .069 (1.75) 1.270 (32.3) 12 .938 (23.8) .069 (1.75) 1.260 (32.0) 13 1.000 (25.4) .069 (1.75) 1.370 (34.8) 14 1.125 (28.6) .069 (1.75) 1.470 (37.3) Table IV: Symbol and Finish Symbol Z Max B Table V: (Manufacturer's Option) Finish Material Finish N Electroless Nickel K Nickel Plate Copper Tin Plate W Cadmium/Olive Drab over Electroless Nickel (1000 Hour Salt Spray) T Tin Plate Stainless Steel Passivated X Nickel Flurocarbon Polymer Z Zinc Nickel APPLICATION NOTES 1. Assembly identification with manufactuer's name and part number, space permitting. 2. Metric equivalents are given for general information only and are based on 1.00 inch = 25.4 mm. 3. Termination band configuration is not controlled. Band with buckle may exceed the "Z" dimensions (see Table II) provided the band does not interfere with boot attachment. Band material shall be as specified in Table V. 4. 5. Three (3) holes equally spaced shall be provided and accommodate .020 (0.51) maximum safety wire for the nonself-locking coupling configuration. 6. .125 (3.2 mm) diameter drain holes will be provided, 4 places, equally spaced (Optional, see part number development). O-Ring not required when drain hole option is specified. 7. Material/Finish: Adapter, coupling nut - Al alloy/see Table III. Termination band - See Table V (manufacturer's option). Braid - Copper/see Table IV. O-Ring - Silicone/N.A. Termination of the accessory shield with harness shield may be performed with a GS85049/93 shield support ring or similar split ring accessory types. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-123 E-Mail: sales@glenair.com AS85049 AS85049/117 90 RFI/EMI Shield-Sock Shrink Boot Adapter With Optional Self-Locking Coupling Nut CONNECTOR DESIGNATOR: H Product Series and Specification Sheet MIL-DTL-38999 Series III and IV EN3645 Shield Finish (Table IV) M85049/117 B S S = Detented, Self-Locking - = Non-Self-Locking (Use Dash) N = Non-Detented, Self-Locking 11 Shell Size (Table I) T Entry Size (Table II) W Drain Hole (Omit for None) 03 - 6 Finish (Table III) D Braid Length 1 Inch Increments, 6" Min., 18" Max Drain Holes See Note 6 O-Ring See Note 6 J Configuration Optional A Thread Elbow Body B .140 (3.56) .130 (3.30) Marking Location TABLE II: Entry Size and Dimensions H Optional Knurl Style Mfr Option - Typ .075 (1.9) (Ref ) Wire Holes See Note 5 Coupling Nut Length .50 (12.7 ) Termination Band See Note 4 Single Layer Shield W Y Z (c) 2013 Glenair, Inc. Y Entry W +.008 (.20) Size .020 (.51) -.000 (.00) Z Max 01 .250 (6.4) .044 (1.12) .560 (14.2) 02 .312 (7.9) .044 (1.12) .630 (16.0) 03 .375 (9.5) .044 (1.12) .690 (17.5) 04 .438 (11.1) .044 (1.12) .750 (19.1) 05 .500 (12.7) .044 (1.12) .820 (20.8) 06 .562 (14.3) .044 (1.12) .890 (22.6) 07 .625 (15.9) .044 (1.12) .950 (24.1) 08 .688 (17.5) .044 (1.12) 1.020 (25.9) 09 .750 (19.1) .069 (1.75) 1.070 (27.2) 10 .812 (20.6) .069 (1.75) 1.130 (28.7) 11 .875 (22.2) .069 (1.75) 1.190 (30.2) 12 .938 (23.8) .069 (1.75) 1.260 (32.0) 13 1.000 (25.4) .069 (1.75) 1.320 (33.5) 14 1.125 (28.6) .069 (1.75) 1.470 (37.3) Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-124 E-Mail: sales@glenair.com AS85049 AS85049/117 90 RFI/EMI Shield-Sock Shrink Boot Adapter With Optional Self-Locking Coupling Nut TABLE I: Shell Size, Entry Size, Thread and Dimensions Accessory Shell Size Code A ISO Metric H Max Allowable Cable Entry Size J Max 9 M12 x 1 - 6H .858 (21.79) 1.730 (43.94) 11 M15 x 1 - 6H .984 (24.99) 1.850 (46.99) 1.000 (25.40) 01-03 13 M18 x 1 - 6H 1.157 (29.39) 1.870 (47.50) 1.125 (28.58) 01-05 15 M22 x 1 - 6H 1.279 (32.49) 1.940 (49.28) 1.312 (33.32) 03-07 17 M25 x 1 - 6H 1.406 (35.71) 2.030 (51.56) 1.500 (38.10) 05-09 19 M28 x 1 - 6H 1.516 (38.51) 2.200 (55.88) 1.750 (44.45) 06-10 21 M31 x 1 - 6H 1.642 (41.71) 2.200 (55.88) 1.750 (44.45) 08-12 23 M34 x 1 - 6H 1.768 (44.91) 2.310 (58.67) 2.000 (50.80) 09-13 25 M37 x 1 - 6H 1.889 (47.98) 2.310 (58.67) 2.000 (50.80) 10-14 Table III: Symbol and Finish Symbol B Max Diameter Finish Table IV: Symbol and Finish Symbol .875 (22.23) 01 B Table V: (Manufacturer's Option) Finish Material Finish N Electroless Nickel K Nickel Plate Copper Tin Plate W Cad/O.D. over electroless nickel (1000 hour salt spray) T Tin Plate Stainless Steel Passivated Z Black zinc nickel (1000 hour salt spray) APPLICATION NOTES 1. Assembly identified with manufacturer's name and part number, space permitting. 2. With Optional Self-Locking Coupling Nut Metric equivalents are given for general information only and are based on 1.000 inch (25.40 mm). 3. Termination band configuration is not controlled. Band with buckle may exceed the "Z" dimension (See Table II) provided the band does not interfere with boot attachment, band material shall be specified as in Table V. 4. 5. Three (3) holes equally spaced shall be provided and accommodate .020 (.51) maximum safety wire for the non-selflocking coupling configuration. 6. Drain holes will be provided with a.125 (3.2 mm) diameter, 4 places equally spaces (optional, see part number development). O-Ring not required when drain hole option is specified. 7. Material/Finish: Adapter, coupling nut - Al alloy/See Table III Band - See Table V, manufacturer's option Braid - Copper/See Table IV Termination of rthe accessory shield with harness shield may be performed with a AS85049/93 shield support ring or similar split ring accessory types. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-125 E-Mail: sales@glenair.com AS85049 AS85049/118 Straight Strain Relief Self-Locking or Non-Self-Locking Material and Finish Designator A = Aluminum, Black Anodize N = Aluminum, Electroless Nickel S = Stainless Steel, Passivate W = Aluminum, Cadmium, Olive Drab X = Aluminum, Nickel Fluorocarbon Polymer Y = Aluminum, Pure Dense Electrodeposited Aluminum Z = Aluminum, Zinc-Nickel CONNECTOR DESIGNATOR: A AS5015 Series AS34001 Crimp, MIL-DTL-26482 Series II, SAE-AS1703 Crimp Series III, MIL-DTL-83723 Series I & III B M85049/118 Product Series and Basic Part Number 08 S = Detented Self-Locking N = Non-Detented Self-Locking Use Dash (-) for Non-Self-Locking (See Note 5) E Coupling Nut S F Captive Self-locking Nut Typical A Thread Dash No. Table I C See Note 4 G B Knurl Style Optional W Screw D .06/.25 (1.52/6.35) Screw Extension H APPLICATION NOTES (c) 2013 Glenair, Inc. 1. Assembly to be identified with manufacturer's name and part number, space permitting. 2. Glenair Series 600 Backshell Assembly Tools are recommended for assembly and installation. 3. Metric equivalents in parentheses (mm) are given for general information only and are based on 1.000 inch = 25.4 mm. 4. Cable entry is measured with saddle bars closed and bottomed on clamp ears. 5. Detented self-locking has a positive audible detented coupling. 6. Material/Finish: Clamp body, coupling nut, saddles - Al alloy or 300 Series SST/See Table II. Clamp screws and lock nuts - CRES/Passivated, Silver plate optional. Anti-rotation device - Corrosion resistant material Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-124 E-Mail: sales@glenair.com AS85049 AS85049/118 Straight Strain Relief Self-Locking or Non-Self-Locking TABLE I: Dash Number, Shell Size, Thread and Dimensions (Continued Below) Dash Screw No. Size 03 08 10 12 14 16 18 20 22 24 28 32 36 40 44 48 61 MIL-DTL-83723 Series III MIL-DTL-5015 MS3400 Series AS81703 Series III MIL-DTL-26482 Series II A Thread Class 2B B Dia Max C Dim .031 (0.8) D Min E Max Length -- 8 10 12 14 16 18 20 22 24 -- -- -- -- -- -- -- -- 8S 10S, 10SL 12, 12S 14.14S 16, 16S 18 20 22 24 28 32 36 40 44 48 -- 3 -- -- 7 12 19 27 37 -- -- -- -- -- -- -- -- 61 -- 8 10 12 14 16 18 20 24 -- -- -- -- -- -- -- -- 9/16-24 UNEF 1/2-20 UNF 5/8-20 UNEF 3/4-20 UNEF 7/8-20 UNEF 1-20 UNEF 1 1/16-18 UNEF 1 3/16-18 UNEF 1 5/16-18 UNEF 1 7/16-18 UNEF 1 3/4-18 UNS 2-18 UNS 2 1/4-16 UN 2 1/2-16 UN 2 3/4-16 UN 3-16 UN 1 1/2-18 UNEF .95 (24.1) .89 (22.6) 1.01 (25.7) 1.14 (29.0) 1.26 (32.0) 1.39 (35.3) 1.51 (38.4) 1.64 (41.7) 1.176 (44.7) 1.89 (48.0) 2.14 (54.4) 2.40 (61.0) 2.64 (67.1) 2.89 (73.4) 3.14 (79.8) 3.39 (86.1) 1.95 (49.5) .219 (5.6) .219 (5.6) .264 (6.7) .344 (8.7) .460 (11.7) .545 (13.8) .615 (15.6) .698 (17.7) .780 (19.8) .850 (21.6) .950 (24.1) 1.015 (25.8) 1.187 (30.1) 1.220 (31.0) 1.500 (38.1) 1.625 (41.3) .850 (21.6) .22 (5.6) .22 (5.6) .27 (6.9) .35 (8.9) .47 (11.9) .55 (14.0) .62 (15.7) .70 (17.8) .78 (19.8) .85 (21.6) .95 (24.1) 1.02 (25.2) 1.19 (30.2) 1.22 (31.0) 1.50 (38.1) 1.63 (41.4) .85 (21.6) 1.14 (29.0) 1.14 (29.0) 1.25 (31.8) 1.38 (35.1) 1.38 (35.1) 1.50 (38.1) 1.75 (44.5) 1.88 (47.8) 2.00 (50.8) 2.13 (54.1) 2.56 (65.0) 2.81 (71.4) 3.06 (77.7) 3.16 (80.3) 3.53 (89.7) 3.93 (99.8) 2.13 (54.1) 4-40 4-40 4-40 4-40 4-40 4-40 6-32 6-32 6-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32 TABLE I: (Continued from Above) Dash No. Screw Size MIL-DTL-83723 Series III MIL-DTL-5015 MS3400 Series AS81703 Series III MIL-DTL-26482 Series II F Dim 03 4-40 -- -- 3 -- .77 (19.6) .51 (13.0) .88 (22.4) .710 (18.00 8 .77 (19.6) .51 (13.0) .88 (22.4) .710 (18.00 10 .89 (22.6) .64 (16.3) .94 (23.9) .710 (18.00 12 1.01 (25.7) .76 (19.3) 1.12 (28.4) .710 (18.00 14 1.01 (25.7) .76 (19.3) 1.19 (30.3) .710 (18.00 16 1.13 (28.7) .88 (22.4) 1.44 (36.6) .710 (18.00 18 1.38 (35.1) 1.13 (28.7) 1.56 (39.6) .710 (18.00 20 1.51 (38.4) 1.25 (31.8) 1.69 (42.9) .710 (18.00 24 1.62 (41.1) 1.38 (35.1) 1.75 (44.5) .710 (18.00 -- 1.76 (44.7) 1.51 (38.4) 1.88 (47.8) .710 (18.00 -- 2.03 (51.6) 1.67 (42.5) 2.12 (53.8) .890 (22.6) -- 2.28 (57.9) 1.87 (47.5) 2.50 (63.5) .890 (22.6) -- 2.53 (64.3) 2.22 (56.4) 2.62 (66.5) .890 (22.6) -- 2.63 (66.8) 2.41 (61.2) 2.68 (68.1) .890 (22.6) -- 3.00 (76.2) 2.80 (71.1) 3.00 (76.2) .890 (22.6) -- 3.40 (86.4) 3.20 (81.3) 3.50 (88.9) .890 (22.6) -- 1.76 (44.7) 1.51 (38.5) 1.88 (47.8) .710 (18.0) 08 10 12 14 16 18 20 22 24 28 32 36 40 44 48 61 (c) 2013 Glenair, Inc. 4-40 4-40 4-40 4-40 4-40 6-32 6-32 6-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32 8 10 12 14 16 18 20 22 24 -- -- -- -- -- -- -- 8S 10S, 10SL 12, 12S 14.14S 16, 16S 18 20 22 24 28 32 36 40 44 48 -- -- -- 7 12 19 27 37 -- -- -- -- -- -- -- -- 61 G Dim Max H Dim Max Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-125 E-Mail: sales@glenair.com B AS85049 AS85049/118 Straight Strain Relief Self-Locking or Non-Self-Locking Material and Finish Designator A = Aluminum, Black Anodize N = Aluminum, Electroless Nickel S = Stainless Steel, Passivate W = Aluminum, Cadmium, Olive Drab X = Aluminum, Nickel Fluorocarbon Polymer Y = Aluminum, Pure Dense Electrodeposited Aluminum Z = Aluminum, Zinc-Nickel CONNECTOR DESIGNATOR: A AS5015 Series AS34001 Crimp, MIL-DTL-26482 Series II, SAE-AS1703 Crimp Series III, MIL-DTL-83723 Series I & III B M85049/118 Product Series and Basic Part Number 08 S = Detented Self-Locking N = Non-Detented Self-Locking Use Dash (-) for Non-Self-Locking (See Note 5) E Coupling Nut S F Captive Self-locking Nut Typical A Thread Dash No. Table I C See Note 4 G B Knurl Style Optional W Screw D .06/.25 (1.52/6.35) Screw Extension H APPLICATION NOTES (c) 2013 Glenair, Inc. 1. Assembly to be identified with manufacturer's name and part number, space permitting. 2. Glenair Series 600 Backshell Assembly Tools are recommended for assembly and installation. 3. Metric equivalents in parentheses (mm) are given for general information only and are based on 1.000 inch = 25.4 mm. 4. Cable entry is measured with saddle bars closed and bottomed on clamp ears. 5. Detented self-locking has a positive audible detented coupling. 6. Material/Finish: Clamp body, coupling nut, saddles - Al alloy or 300 Series SST/See Table II. Clamp screws and lock nuts - CRES/Passivated, Silver plate optional. Anti-rotation device - Corrosion resistant material Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-126 E-Mail: sales@glenair.com AS85049 AS85049/118 Straight Strain Relief Self-Locking or Non-Self-Locking TABLE I: Dash Number, Shell Size, Thread and Dimensions (Continued Below) Dash Screw No. Size 03 08 10 12 14 16 18 20 22 24 28 32 36 40 44 48 61 MIL-DTL-83723 Series III MIL-DTL-5015 MS3400 Series AS81703 Series III MIL-DTL-26482 Series II A Thread Class 2B B Dia Max C Dim .031 (0.8) D Min E Max Length -- 8 10 12 14 16 18 20 22 24 -- -- -- -- -- -- -- -- 8S 10S, 10SL 12, 12S 14.14S 16, 16S 18 20 22 24 28 32 36 40 44 48 -- 3 -- -- 7 12 19 27 37 -- -- -- -- -- -- -- -- 61 -- 8 10 12 14 16 18 20 22 -- -- -- -- -- -- -- -- 9/16-24 UNEF 1/2-20 UNF 5/8-20 UNEF 3/4-20 UNEF 7/8-20 UNEF 1-20 UNEF 1 1/16-18 UNEF 1 3/16-18 UNEF 1 5/16-18 UNEF 1 7/16-18 UNEF 1 3/4-18 UNS 2-18 UNS 2 1/4-16 UN 2 1/2-16 UN 2 3/4-16 UN 3-16 UN 1 1/2-18 UNEF .95 (24.1) .89 (22.6) 1.01 (25.7) 1.14 (29.0) 1.26 (32.0) 1.39 (35.3) 1.51 (38.4) 1.64 (41.7) 1.176 (44.7) 1.89 (48.0) 2.14 (54.4) 2.40 (61.0) 2.64 (67.1) 2.89 (73.4) 3.14 (79.8) 3.39 (86.1) 1.95 (49.5) .219 (5.6) .219 (5.6) .264 (6.7) .344 (8.7) .460 (11.7) .545 (13.8) .615 (15.6) .698 (17.7) .780 (19.8) .850 (21.6) .950 (24.1) 1.015 (25.8) 1.187 (30.1) 1.220 (31.0) 1.500 (38.1) 1.625 (41.3) .850 (21.6) .22 (5.6) .22 (5.6) .27 (6.9) .35 (8.9) .47 (11.9) .55 (14.0) .62 (15.7) .70 (17.8) .78 (19.8) .85 (21.6) .95 (24.1) 1.02 (25.2) 1.19 (30.2) 1.22 (31.0) 1.50 (38.1) 1.63 (41.4) .85 (21.6) 1.14 (29.0) 1.14 (29.0) 1.25 (31.8) 1.38 (35.1) 1.38 (35.1) 1.50 (38.1) 1.75 (44.5) 1.88 (47.8) 2.00 (50.8) 2.13 (54.1) 2.56 (65.0) 2.81 (71.4) 3.06 (77.7) 3.16 (80.3) 3.53 (89.7) 3.93 (99.8) 2.13 (54.1) 4-40 4-40 4-40 4-40 4-40 4-40 6-32 6-32 6-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32 TABLE I: (Continued from Above) Dash No. Screw Size MIL-DTL-83723 Series III MIL-DTL-5015 MS3400 Series AS81703 Series III MIL-DTL-26482 Series II F Dim 03 4-40 -- -- 3 -- .77 (19.6) .51 (13.0) .88 (22.4) .710 (18.00 8 .77 (19.6) .51 (13.0) .88 (22.4) .710 (18.00 10 .89 (22.6) .64 (16.3) .94 (23.9) .710 (18.00 12 1.01 (25.7) .76 (19.3) 1.12 (28.4) .710 (18.00 14 1.01 (25.7) .76 (19.3) 1.19 (30.3) .710 (18.00 16 1.13 (28.7) .88 (22.4) 1.44 (36.6) .710 (18.00 18 1.38 (35.1) 1.13 (28.7) 1.56 (39.6) .710 (18.00 20 1.51 (38.4) 1.25 (31.8) 1.69 (42.9) .710 (18.00 24 1.62 (41.1) 1.38 (35.1) 1.75 (44.5) .710 (18.00 -- 1.76 (44.7) 1.51 (38.4) 1.88 (47.8) .710 (18.00 -- 2.03 (51.6) 1.67 (42.5) 2.12 (53.8) .890 (22.6) -- 2.28 (57.9) 1.87 (47.5) 2.50 (63.5) .890 (22.6) -- 2.53 (64.3) 2.22 (56.4) 2.62 (66.5) .890 (22.6) -- 2.63 (66.8) 2.41 (61.2) 2.68 (68.1) .890 (22.6) -- 3.00 (76.2) 2.80 (71.1) 3.00 (76.2) .890 (22.6) -- 3.40 (86.4) 3.20 (81.3) 3.50 (88.9) .890 (22.6) -- 1.76 (44.7) 1.51 (38.5) 1.88 (47.8) .710 (18.0) 08 10 12 14 16 18 20 22 24 28 32 36 40 44 48 61 (c) 2013 Glenair, Inc. 4-40 4-40 4-40 4-40 4-40 6-32 6-32 6-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32 8 10 12 14 16 18 20 22 24 -- -- -- -- -- -- -- 8S 10S, 10SL 12, 12S 14.14S 16, 16S 18 20 22 24 28 32 36 40 44 48 -- -- -- 7 12 19 27 37 -- -- -- -- -- -- -- -- 61 G Dim Max H Dim Max Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-127 Rev. 05.15.18 E-Mail: sales@glenair.com B AS85049 AS85049/121 Straight Strain Relief Self-Locking or Non-Self-Locking CONNECTOR DESIGNATOR: F Dash No. Table I Page 62-28 Product Series and Basic Part Number MIL-DTL-38999 Series I and II M85049/121 B S Finish Table II Page 62-28 08 W S = Detented Self-Locking N = Non-Detented Self-Locking Use Dash (-) for Non-Self-Locking (See Note 5) E Coupling Nut F Captive Self-locking Nut -typ- A Thread C See Note 4 Screw G B Knurl Style Optional D .060/.250 (1.52/6.35) Screw Extension .590 (14.99) Max APPLICATION NOTES 1. Captivewith manufacturer's name Assembly to be identified and part number, space permitting. C 2. -typGlenair Series 600 Backshell Assembly Tools are recommended for assembly and installation. 3. Metric equivalents in parentheses (mm) are given for general information only and are based on 1.000 inch = 25.4 mm. 4. Cable entry is measured with saddle bars closed and bottomed on clamp ears. 5. Detented self-locking has a positive audible detented coupling. 6. Material/Finish: Clamp body, coupling nut, saddles - Al alloy or 300 Series SST/See Table II. Clamp screws and lock nuts - CRES/Passivated, Silver plate optional. Anti-rotation device - Corrosion resistant material (c) 2013 Glenair, Inc. Self-locking Nut See Note 4 Screw Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-128 E-Mail: sales@glenair.com AS85049 AS85049/121 Straight Strain Relief Self-Locking or Non-Self-Locking TABLE I: Dash Number, Shell Size, Thread and Dimensions (Continued Below) Dash Screw No. Size 08 10 12 14 16 18 20 22 24 4-40 4-40 4-40 4-40 4-40 6-32 6-32 6-32 8-32 Connector Shell Size Series I Series II 9 11 13 15 17 19 21 23 25 8 10 12 14 16 18 20 22 24 A Thread Class 2B B Dia Max C Dim .031 (0.79) See Note 4 7/16-28 UNEF .858 (21.8) .219 (5.6) 9/16-24 UNEF .984 (25.0) 11/16-24 UNEF 1.157 (29.4) 13/16-20 UNEF 1.297 (32.5) 15/16-20 UNEF 1.406 (35.7) 1 1/16-18 UNEF 1.516 (38.5) 1 3/16-18 UNEF 1.642 (41.7) 1 5/16-18 UNEF 1.768 (44.9) 1 7/16-18 UNEF 1.869 (47.5) .264 (6.7) .344 (8.7) .460 (11.7) .545 (13.8) .615 (15.6) .698 (17.7) .780 (19.8) .850 (21.6) D Min E Max Length F Dim G Max .22 (5.6) 1.01 (25.7) .77 (19.6) .51 (13.0) .88 (22.4) .27 (6.9) 1.13 (28.7) .89 (22.6) .64 (16.3) .94 (23.9) .35 (8.9) 1.25 (31.8) 1.01 (25.7) .76 (19.3) 1.12 (28.4) .47 (11.9) 1.25 (31.8) 1.01 (25.7) .76 (19.3) 1.19 (30.2) .55 (14.0) 1.37 (34.8) 1.13 (28.7) .88 (22.4) 1.44 (36.6) .62 (15.7) 1.62 (41.1) 1.38 (35.1) 1.13 (28.7) 1.56 (39.6) .70 (17.8) 1.75 (44.5) 1.51 (38.4) 1.26 (32.0) 1.69 (42.9) .78 (19.8) 1.87 (47.5) 1.63 (41.4) 1.38 (35.1) 1.75 (44.5) .85 (21.6) 2.00 (50.8) 1.76 (44.7) 1.51 (38.4) 1.88 (47.8) TABLE II: Material and Finish Symbol A N W X Material Aluminum Alloy Y Z S (c) 2013 Glenair, Inc. 300 Series SST Finish Black Anodize Electroless Nickel Cadmium, Olive Drab Nickel Fluorocarbon Polymer Pure Dense Electrodeposited Aluminum Zinc Nickel Passivated Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-129 E-Mail: sales@glenair.com B AS85049 AS85049/123 90 Strain Relief Self-Locking or Non-Self Locking CONNECTOR DESIGNATOR: F Dash No. Table I Page 62-30 Product Series and Basic Part Number MIL-DTL-38999 Series I and II M85049/123 B S 08 Finish Table II Page 62-30 W S = Detented Self-Locking N = Non-Detented Self-Locking Use Dash (-) for Non-Self-Locking (See Note 5) E Coupling Nut D A Thread O.125 (3.2) Drain Holes 3 Min, Equally Spaced B G F Knurl Style Optional .590 (14.99) Max .060/.380 (1.52/9.65) Screw Extension Captive Self-locking Nut -typ- (c) 2013 Glenair, Inc. H C See Note 4 Screw Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-130 E-Mail: sales@glenair.com AS85049 AS85049/123 90 Strain Relief Self-Locking or Non-Self Locking TABLE I: Dash Number, Shell Size, Thread and Dimensions (Continued Below) Dash Screw No. Size 08 10 12 14 16 18 20 22 24 4-40 4-40 4-40 4-40 4-40 6-32 6-32 6-32 8-32 Connector Shell Size Series I Series II 9 8 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 A Thread Class 2B B Dia Max 7/16-28 UNEF 9/16-24 UNEF 11/16-24 UNEF 13/16-20 UNEF 15/16-20 UNEF 1 1/16-18 UNEF 1 3/16-18 UNEF 1 5/16-18 UNEF 1 7/16-18 UNEF .858 (21.8) .984 (25.0) 1.157 (29.4) 1.297 (32.5) 1.406 (35.7) 1.516 (38.5) 1.642 (41.7) 1.768 (44.9) 1.869 (47.5) C Dim .031 (0.79) See Note 4 .219 (5.6) .264 (6.7) .344 (8.7) .460 (11.7) .545 (13.8) .615 (15.6) .698 (17.7) .780 (19.8) .850 (21.6) D Max E Max Length F Max G Max H Max .86 (21.8) .94 (23.9) 1.14 (29.0) 1.20 (30.5) 1.34 (34.0) 1.46 (37.1) 1.58 (40.1) 1.71 (43.4) 1.83 (46.5) 1.10 (27.9) 1.18 (30.0) 1.38 (35.1) 1.44 (36.6) 1.58 (40.1) 1.70 (43.2) 1.82 (46.2) 1.95 (49.5) 2.07 (52.6) .81 (20.6) .87 (22.1) .93 (23.6) .99 (25.1) 1.09 (27.7) 1.23 (31.2) 1.30 (33.0) 1.36 (34.5) 1.42 (36.1) 1.24 (31.5) 1.36 (34.5) 1.51 (38.4) 1.63 (41.4) 1.76 (44.7) 1.99 (50.5) 2.12 (53.8) 2.24 (56.9) 2.35 (59.7) .88 (22.4) .94 (23.9) 1.12 (28.4) 1.19 (30.2) 1.44 (36.6) 1.56 (39.6) 1.69 (42.9) 1.75 (44.5) 1.88 (47.8) TABLE II: Material and Finish Symbol A N W X Material Aluminum Alloy Y Z S 300 Series SST Finish Black Anodize Electroless Nickel Cadmium, Olive Drab Nickel Fluorocarbon Polymer Pure Dense Electrodeposited Aluminum Zinc Nickel Passivated APPLICATION NOTES (c) 2013 Glenair, Inc. 1. Captivewith manufacturer's name Assembly to be identified and part number, space permitting. C 2. -typGlenair Series 600 Backshell Assembly Tools are recommended for assembly and installation. 3. Metric equivalents in parentheses (mm) are given for general information only and are based on 1.000 inch = 25.4 mm. 4. Cable entry is measured with saddle bars closed and bottomed on clamp ears. 5. Detented self-locking has a positive audible detented coupling. 6. Material/Finish: Clamp body, coupling nut, saddles - Al alloy or 300 Series SST/See Table II. Clamp screws and lock nuts - CRES/Passivated, Silver plate optional. Anti-rotation device - Corrosion resistant material Self-locking Nut See Note 4 Screw Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-131 E-Mail: sales@glenair.com B AS85049 AS85049/124 Straight Strain Relief Self-Locking or Non-Self-Locking CONNECTOR DESIGNATOR: H Product Series and Basic Part Number MIL-DTL-38999 Series III & IV EN3645 M85049/124 B Dash No. Table I Page 62-32 S 09 Finish Table II Page 62-32 W S = Detented Self-Locking N = Non-Detented Self-Locking Use Dash (-) for Non-Self-Locking (See Note 5) E Coupling Nut F Captive Self-locking Nut -typ- A Thread G B Knurl Style Optional (c) 2013 Glenair, Inc. C See Note 4 Screw D .25 (6.35) Max Screw Extension .660 (16.76) Max Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-132 E-Mail: sales@glenair.com AS85049 AS85049/124 Straight Strain Relief Self-Locking or Non-Self-Locking TABLE I: Dash Number, Shell Size, Thread and Dimensions (Continued Below) Dash Screw Shell Size No. Size Code (Ref) 09 11 13 15 17 19 21 23 25 4-40 4-40 4-40 4-40 4-40 6-32 6-32 6-32 8-32 A B C D E F G H J A Thread ISO Metric B Dia Max M12 x 1 - 6H M15 x 1 - 6H M18 x 1 - 6H M22 x 1 - 6H M25 x 1 - 6H M28 x 1 - 6H M31 x 1 - 6H M34 x 1 - 6H M37 x 1 - 6H .858 (21.8) .984 (25.0) 1.157 (29.4) 1.297 (32.5) 1.406 (35.7) 1.516 (38.5) 1.642 (41.7) 1.768 (44.9) 1.869 (47.5) C Dim .031 (0.79) See Note 4 .219 (5.6) .264 (6.7) .344 (8.7) .460 (11.7) .545 (13.8) .615 (15.6) .698 (17.7) .780 (19.8) .850 (21.6) D Min E Max Length F Max G Max .22 (5.6) .27 (6.9) .35 (8.9) .47 (11.9) .55 (14.0) .62 (15.7) .70 (17.8) .78 (19.8) .85 (21.6) 1.05 (26.7) 1.17 (22.6) 1.29 (32.8) 1.29 (32.8) 1.41 (35.8) 1.66 (42.2) 1.79 (45.5) 1.91 (48.5) 2.04 (51.8) .77 (19.6) .89 (22.6) 1.01 (25.7) 1.01 (25.7) 1.13 (28.7) 1.38 (35.1) 1.51 (38.4) 1.63 (41.4) 1.76 (44.7) .88 (22.4) .94 (23.9) 1.12 (28.4) 1.19 (30.2) 1.44 (36.6) 1.56 (39.6) 1.69 (42.9) 1.75 (44.5) 1.88 (47.8) TABLE II: Material and Finish Symbol A N W X Material Aluminum Alloy Y Z S 300 Series SST Finish Black Anodize Electroless Nickel Cadmium, Olive Drab Nickel Fluorocarbon Polymer Pure Dense Electrodeposited Aluminum Zinc Nickel Passivated APPLICATION NOTES (c) 2013 Glenair, Inc. 1. Captivewith manufacturer's name Assembly to be identified and part number, space permitting. C 2. -typGlenair Series 600 Backshell Assembly Tools are recommended for assembly and installation. 3. Metric equivalents in parentheses (mm) are given for general information only and are based on 1.000 inch = 25.4 mm. 4. Cable entry is measured with saddle bars closed and bottomed on clamp ears. 5. Detented self-locking has a positive audible detented coupling. 6. Material/Finish: Clamp body, coupling nut, saddles - Al alloy or 300 Series SST/See Table II. Clamp screws and lock nuts - CRES/Passivated, Silver plate optional. Anti-rotation device - Corrosion resistant material Self-locking Nut See Note 4 Screw Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-133 E-Mail: sales@glenair.com B AS85049 AS85049/126 90 Strain Relief Self-Locking or Non-Self-Locking CONNECTOR DESIGNATOR: H Dash No. Table I Page 62-34 Product Series and Basic Part Number MIL-DTL-38999 Series III & IV EN3645 M85049/126 B 09 W S = Detented Self-Locking N = Non-Detented Self-Locking Use Dash (-) for Non-Self-Locking (See Note 5) E Coupling Nut S Finish Table II Page 62-34 D A Thread O.125 (3.2) Drain Holes 3 Min, Equally Spaced B G F Knurl Style Optional .660 (16.8) Max .060/.380 (1.52/9.65) Screw Extension Captive Self-locking Nut -typ- (c) 2013 Glenair, Inc. H C See Note 4 Screw Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-134 E-Mail: sales@glenair.com AS85049 AS85049/126 90 Strain Relief Self-Locking or Non-Self-Locking TABLE I: Dash Number, Shell Size, Thread and Dimensions Dash Screw Shell Size No. Size Code (Ref) 09 11 13 15 17 19 21 23 25 4-40 4-40 4-40 4-40 4-40 6-32 6-32 6-32 8-32 A B C D E F G H J A Thread ISO Metric B Dia Max M12 x 1 - 6H M15 x 1 - 6H M18 x 1 - 6H M22 x 1 - 6H M25 x 1 - 6H M28 x 1 - 6H M31 x 1 - 6H M34 x 1 - 6H M37 x 1 - 6H .858 (21.8) .984 (25.0) 1.157 (29.4) 1.297 (32.5) 1.406 (35.7) 1.516 (38.5) 1.642 (41.7) 1.768 (44.9) 1.869 (47.5) C Dim D .031 (0.79) Max See Note 4 .219 (5.6) .86 (21.8) .264 (6.7) .94 (23.9) .344 (8.7) 1.14 (29.0) .460 (11.7) 1.20 (30.5) .545 (13.8) 1.34 (34.0) .615 (15.6) 1.46 (37.1) .698 (17.7) 1.58 (40.1) .780 (19.8) 1.71 (43.4) .850 (21.6) 1.83 (46.5) E Max Length F Max G Max H Max 1.14 (29.0) 1.22 (31.0) 1.42 (36.1) 1.48 (37.6) 1.62 (41.1) 1.74 (44.2) 1.86 (47.2) 1.99 (50.5) 2.11 (53.6) .81 (20.6) .87 (22.1) .93 (23.6) .99 (25.1) 1.09 (27.7) 1.23 (31.2) 1.30 (33.0) 1.36 (34.5) 1.42 (36.1) 1.24 (31.5) 1.36 (34.5) 1.51 (38.4) 1.63 (41.4) 1.76 (44.7) 1.99 (50.5) 2.12 (53.8) 2.24 (56.9) 2.35 (59.7) .88 (22.4) .94 (23.9) 1.12 (28.4) 1.19 (30.2) 1.44 (36.6) 1.56 (39.6) 1.69 (42.9) 1.75 (44.5) 1.88 (47.8) TABLE II: Material and Finish Symbol A N W X Material Aluminum Alloy Y Z S 300 Series SST Finish Black Anodize Electroless Nickel Cadmium, Olive Drab Nickel Fluorocarbon Polymer Pure Dense Electrodeposited Aluminum Zinc Nickel Passivated APPLICATION NOTES (c) 2013 Glenair, Inc. 1. Captivewith manufacturer's name Assembly to be identified and part number, space permitting. C 2. -typGlenair Series 600 Backshell Assembly Tools are recommended for assembly and installation. 3. Metric equivalents in parentheses (mm) are given for general information only and are based on 1.000 inch = 25.4 mm. 4. Cable entry is measured with saddle bars closed and bottomed on clamp ears. 5. Detented self-locking has a positive audible detented coupling. 6. Material/Finish: Clamp body, coupling nut, saddles - Al alloy or 300 Series SST/See Table II. Clamp screws and lock nuts - CRES/Passivated, Silver plate optional. Anti-rotation device - Corrosion resistant material Self-locking Nut See Note 4 Screw Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-135 E-Mail: sales@glenair.com B AS85049 AS85049/127 Bushing Strip Basic Part Number M85049/127 - 02 B Order No. Table I .12 (3.0) .03 (0.8) Typ .075 (1.9) .015 (0.4) .12 (3.0) .03 (0.8) .24 (6.1) .03 (0.8) .040 (1.0) .010 (0.3) Typ 10.00 (254.0) .12 (3.0) A TABLE I: Order Number, Dimensions, Sizes Order No. A .031 (0.8) Dim Used on Size /118, /120, /121, /123 Used on Size /124, /126 01 02 03 .312 (7.9) .440 (11.2) .560 (14.2) 03-16 18-24 and 61 28-40 09-17 19-25 - APPLICATION NOTES 1. 2. 3. (c) 2013 Glenair, Inc. Assembly identified by bag and tag in suitable quantities. Material/finish: Silicone/N.A. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-136 E-Mail: sales@glenair.com AS85049 AS85049/128-3 and AS85049/128-4 Clamping Band Standard Length, Flat or Precoiled 3 = Standard Length 4 = Precoiled M85049/128 - 3 B Basic Part Number M85049/128 = Clamping Band Standard Band M85049/128-3 and Precoiled Standard Band M85049/128-4 Tail Length Indicator Mark .350 (8.9) Ref. .240 (6.1) Ref. 14.256 .030 (362.1 0.8) .156 (4.0) Ref. .020 (0.5) Ref. .074 (1.9) Ref. The M85049/128-3 and -4 Standard Band is precision constructed of 300 Series SST/ Passivate and designed for use with the Glenair 600-058 (QPL'd) hand banding tool, doublewrapped bands will accommodate diameters up to approximately 1.8 inches (45.7). Bands may be ordered flat (M85049/128-3) or precoiled (M85049/128-4). Bands come bagged and tagged in quantities from 1 to 100. Metric dimensions (mm) are indicated in parentheses. Consult factory for diameters above 2.5 inches (63.5). (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. Rev. 1/2/18 Mil-Spec Backshells U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-139 E-Mail: sales@glenair.com AS85049 AS85049/130 Gasket Basic Part Number Material C = Conductive Silicone with Aluminum or Monel Mesh, Capable of 80 dB at 100 MHz. Temperature Range -57 to +260 C. F = Fluorosilicone IAW SAE AMS-R-25988 M = Conductive Silver Filled Silicone IAW MIL-DTL-3528 Type B, Capable of 110 dB at 10GHz. Temperature Range -55 to +260 C. N = Neoprene IAW AMS 3208. S = Silicone IAW AA-59588 V = Viton IAW MIL-R-83248 Dash Number Table I M85049/130 - 18 S B C A B Dia A .037/.027 (0.94x0.69) D Dia Hole 4 Places C Chamfer or Radius Mfr. Option TABLE I: Dimensions (c) 2013 Glenair, Inc. Dash A No. .015 (0.38) B +.020 (0.05) -.000 01 02 03 04 05 06 07 08 09 .594 (15.09) .594 (15.09) .625 (15.88) .719 (18.26) .719 (18.26) .750 (19.05) .812 (20.62) .812 (20.62) .813 (20.65) .568 (14.43) .500 (12.70) .603 (15.32) .680 (12.27) .625 (15.88) .750 (19.05) .875 (22.23) .828 (21.03) .750 (19.05) .812 (20.62) .875 (22.23) .896 (22.76) .937 (23.80) 1.000 (25.40) 1.023 (25.98) 1.060 (26.92) 1.114 (28.30) 1.094 (27.79) .125 (3.18) .156 (3.96) .125 (3.18) .125 (3.18) .156 (3.96) .125 (3.18) .141 (3.58) .125 (3.18) .141 (3.58) 10 .843 (21.41) .875 (22.23) 1.138 (28.91) .125 (3.58) 11 .906 (23.01) 1.005 (25.53) 1.153 (29.29) .125 (3.58) 12 .906 (23.01) .938 (23.83) 1.125 (28.58) .125 (3.58) 13 .906 (23.01) .875 (22.23) 1.188 (30.18) .156 (3.96) 14 .969 (24.61) 1.135 (28.83) 1.258 (31.95) .156 (3.96) 15 .969 (24.61) 1.063 (27.00) 1.250 (31.75) Continued on Page B-141 .125 (3.58) C D .015 (0.38) .010 (0.25) Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-138 E-Mail: sales@glenair.com AS85049 AS85049/130 Gasket TABLE I: Dimensions (Continued From Page B-140) Dash No. A .015 (0.38) B +.020 (0.05) -.000 16 17 18 19 20 21 22 23 24 .969 (24.61) 1.015 (25.78) 1.062 (26.97) 1.062 (26.97) 1.062 (26.97) 1.140 (28.96) 1.156 (29.36) 1.156 (29.36) 1.156 (29.36) 1.000 (25.4) 1.125 (28.58) 1.260 (32.00) 1.189 (30.20) 1.135 (28.83) 1.312 (33.32) 1.375 (34.92) 1.312 (33.32) 1.250 (31.75) 1.281 (32.54) 1.383 (35.13) 1.351 (34.32) 1.343 (34.11) 1.375 (34.92) 1.508 (38.30) 1.500 (38.10) 1.467 (37.26) 1.500 (38.10) .156 (3.69) .125 (3.18) .156 (3.96) .125 (3.18) .156 (3.96) .125 (3.18) .141 (3.58) .125 (3.18) .177 (4.50) 25 1.187 (30.15) 1.266 (32.16) 1.458 (37.03) .125 (3.58) 26 1.250 (31.75) 1.500 (38.10) 1.625 (41.28) .141 (3.58) 27 1.250 (31.75) 1.437 (36.50) 1.562 (39.67) .125 (3.58) 28 1.250 (31.75) 1.375 (34.92) 1.625 (41.28) .177 (4.50) 29 1.281 (32.54) 1.500 (38.10) 1.718 (43.64) .125 (3.18) 30 1.375 (34.92) 1.625 (41.28) 1.750 (44.45) .177 (3.18) 31 1.375 (34.92) 1.563 (39.70) 1.703 (43.26) .156 (3.96) 32 1.375 (34.92) 1.500 (38.10) 1.750 (44.45) .203 (5.16) 33 1.392 (35.36) 1.625 (41.28) 1.818 (46.18) .141 (3.58) 34 1.436 (36.47) 1.570 (39.88) 1.799 (45.69) .125 (3.18) 35 1.500 (38.10) 1.750 (44.45) 1.875 (47.63) .177 (3.18) 36 1.562 (39.67) 1.750 (44.45) 2.000 (50.80) .203 (5.16) 37 1.568 (39.83) 1.875 (47.63) 2.138 (54.31) .141 (3.58) 38 1.719 (43.66) 2.000 (50.80) 2.375 (60.33) .177 (3.18) 39 1.734 (44.04) 2.062 (52.37) 2.328 (59.13) .177 (3.18) 40 1.750 (44.45) 2.000 (50.80) 2.250 (57.15) .219 (5.56) 41 1.906 (48.41) 2.250 (57.15) 2.625 (66.68) .219 (5.56) 42 1.938 (49.23) 2.250 (57.15) 2.500 (63.50) .219 (5.56) 43 2.188 (55.58) 2.500 (63.50) 2.750 (69.85) .219 (5.56) 44 2.375 (60.33) 2.781 (70.64) 3.000 (76.20) .219 (5.56) 45 2.406 (61.11) 2.750 (69.85) 3.125 (79.38) .281 (7.14) 46 2.625 (66.68) 3.031 (76.99) 3.250 (82.55) .219 (5.56) 47 2.656 (67.46) 3.000 (76.20) 3.375 (85.73) .281 (7.14) 48 2.906 (73.81) 3.250 (82.55) 3.625 (92.08) .281 (7.14) 49 3.156 (80.16) 3.500 (88.90) 3.875 (98.43) .281 (7.14) C D .015 (0.38) .010 (0.25) B APPLICATION NOTES 1. 2. 3. (c) 2013 Glenair, Inc. Assembly identified with manufacturer's name and part number, space permitting. For complete dimensions, see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Mil-Spec Backshells Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-139 E-Mail: sales@glenair.com AS85049 MS3420 and AS85049/139 Telescoping Bushing Basic Part Number Dash Number M85049/139 - 3 MS3420 - 3 B Material: Neoprene D .046/.078 (1.2/2.0) A .020/.010 (0.5/0.3) R .015 (0.4) Min C R .015 (0.4) Min B 45 Basic Part Number R .015 (0.4) Min Dash Number MS3420 - 3 M85049/139 - 3 L Material A = Neoprene D = Silicone L = Fluorosilicone L Material A = Neoprene D = Silicone L = Fluorosilicone 2.062/1.938 (52.4/49.2) E F (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 09.28.15 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-140 E-Mail: sales@glenair.com AS85049 MS3420 and AS85049/139 Telescoping Bushing B TABLE I: Reference for Connector Shell Size Dash No. 3 4 6 8 10 12 16 18 20 24 28 32 40 OA Dia OB Dia OC Dia D Dim Dia E Dia F Dia .150/.110 (3.8/2.8) .230/.190 (5.8/4.8) .395/.363 (10.0/9.2) 2.906/2.844 (73.8/72.2) .150/.110 (3.8/2.8) .230/.190 (5.8/4.8) .240/.200 (6.1/5.1) .322/.282 (8.2/7.2) .521/.489 (13.2/12.4) 2.781/2.719 (70.6/69.1) .240/.200 (6.1/5.1) .322/.282 (8.2/7.2) .332/.292 (8.4/7.4) .447/.407 (11.4/10.3) .635/.603 (16.1/15.3) 2.656/2.594 (67.5/65.9) .332/.292 (8.4/7.4) .447/.407 (11.4/10.3) .464/.410 (11.8/10.4) .579/.525 (14.7/13.3) .760/.728 (19.3/18.5) 2.531/2.469 (64.3/62.7) .464/.410 (11.8/10.4) .579/.525 (14.7/13.3) .589/.535 (15.0/13.6) .652/.535 (16.6/13.6) .905/.873 (23.0/59.5) 2.406/2.344 (61.1/10.4) .464/.410 (11.8/10.4) .642/.588 (16.3/14.9) .652/.598 (16.6/15.2) .767/.713 (19.5/18.1) 1.100/1.068 (27.9/27.1) 2.281/2.219 (57.9/56.4) .568/.514 (14.4/13.1) .767/.713 (19.5/18.1) .777/.723 (19.7/18.4) .954/.900 (24.2/22.9) 1.330/1.298 (33.8/33.0) 2.156/2.094 (54.8/53.2) .777/.723 (19.7/18.4) .954/.900 (24.2/22.9) -- -- -- -- .976/.898 (24.8/22.8) 1.142/1.088 (29.0/27.6) .976/.898 (24.8/22.8) 1.279/1.201 (32.5/30.5) 1.614/1.582 (41.0/40.2) 2.031/1.969 (51.6/50.0) .976/.898 (24.8/22.8) 1.279/1.201 (32.5/30.5) 1.289/1.211 (32.7/30.8) 1.404/1.326 (35.7/33.7) 1.863/1.831 (47.3/46.5) 1.906/1.844 (48.4/46.8) 1.164/1.086 (29.6/27.6) 1.404/1.326 (35.7/33.7) 1.414/1.336 (35.9/33.9) 1.653/1.575 (42.0/40.0) 2.101/2.069 (53.4/52.6) 1.781/1.719 (45.2/43.7) 1.289/1.719 (45.2/43.7) 1.653/1.575 (42.0/40.0) 1.675/1.573 (42.5/40.0) 1.915/1.813 (48.6/46.1) 2.351/2.319 (59.7/58.9) 1.656/1.594 (42.1/40.0) 1.676/1.574 (42.6/40.0) 1.916/1.814 (48.7/46.1) 1.925/1.823 (48.9/46.3) 2.415/2.313 (61.3/58.8) 2.851/2.819 (72.4/71.6) 1.531/1.469 (38.9/37.3) 1.926/1.824 (48.9/46.3) 2.416/2.314 (61.4/58.8) APPLICATION NOTES 1. 2. 3. (c) 2013 Glenair, Inc. Assembly identified with manufacturer's name and part number, space permitting. For complete dimensions, see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-141 E-Mail: sales@glenair.com AS85049 AS85049/140 Straight Lipped Heat Shrink Boot Dash Number Table I Basic Part Number Material Table II See Note 2 M85049/140 - 05 B H Drain Holes Omit for None C D Adhesive C = Adhesive Lined U = No Adhesive Table III P Injection Vent Ports P = Vent Ports Omit for None P R See Note 2 H H Dia T HW S H Dia Optional O.12 (3.05) Drain Holes JW .12 Ref (4 Places, 90 Apart) (3.05) As Recovered with Drain Holes Additional Boot Lips (Mfr Option) J Dia See Note 2 H As Supplied Optional O.18 (4.57) Injection Port (c) 2013 Glenair, Inc. J Dia PP Optional O.12 (3.05) Vent Port RR As Recovered with Injection-Vent Port Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-142 E-Mail: sales@glenair.com Dash No. H Dia Min (As Supplied) 01 02 03 04 05 06 07 08 0.92 (23.4) 1.12 (28.4) 1.22 (31.0) 1.42 (36.1) 1.68 (42.7) 2.04 (51.8) 2.60 (66.0) 3.22 (81.8) AS85049 AS85049/140 Straight Lipped Heat Shrink Boot TABLE I: Dash Number and Dimensions (Continued Below) J Dia Min J Dia Min P R H Dia Max J Dia Max (As Recovered) (As Supplied) (As Supplied) (As (As Recovered) (As Recovered) Material Recovered) A, B, H Material G 10% Ref 0.41 (10.4) 0.56 (14.2) 0.70 (17.6) 0.88 (22.4) 1.11 (28.2) 1.38 (35.1) 1.75 (44.5) 2.27 (57.7) 0.92 (23.4) 1.12 (28.4) 1.22 (31.0) 1.42 (36.1) 1.68 (42.7) 2.04 (51.8) 2.60 (66.0) 3.22 (81.8) 0.47 (11.9) 0.58 (14.7) 0.63 (16.0) 0.73 (18.5) 0.87 (22.1) 1.39 (35.3) 1.80 (45.7) 2.25 (57.2) 0.24 (6.1) 0.26 (6.6) 0.28 (7.1) 0.38 (9.7) 0.39 (9.9) 0.63 (16.0) 0.80 (20.3) 1.00 (25.4) 1.50 (38.1) 2.16 (54.9) 2.63 (66.8) 3.15 (80.0) 4.08 (103.6) 5.13 (130.3) 6.50 (165.1) 7.00 (177.8) 0.83 (21.1) 1.09 (27.7) 1.39 (35.3) 1.63 (41.4) 2.22 (56.4) 2.54 (64.5) 3.31 (84.1) 3.75 (95.3) B TABLE I: Dash Number and Dimensions (Continued from Above) T HW PP S RR Dash JW Max (As Recovered) (As Recovered) (As Recovered) (As Recovered) (As Recovered) No. (As Recovered) Ref 20% 10% 10% 10% 01 02 03 04 05 06 07 08 0.04 (1.0) 0.04 (1.0) 0.04 (1.0) 0.04 (1.0) 0.07 (1.8) 0.07 (1.8) 0.08 (2.0) 0.08 (2.0) 0.07 (1.8) 0.07 (1.8) 0.08 (2.0) 0.08 (2.0) 0.09 (2.3) 0.13 (3.3) 0.16 (4.1) 0.16 (4.1) 0.09 (2.2) 0.09 (2.2) 0.10 (2.5) 0.10 (2.5) 0.11 (2.7) 0.16 (4.0) 0.19 (4.9) 0.19 (4.9) 0.60 (15.2) 0.60 (15.2) 0.60 (15.2) 0.60 (15.2) 0.60 (15.2) 0.60 (15.2) 0.60 (15.2) 0.60 (15.2) TABLE II: Shrink Boot Materials Material Compound Code A B G H 2071 2040 2010 2025 0.48 (12.2) 0.49 (12.4) 0.75 (19.1) 0.75 (19.1) 0.75 (19.1) 0.57 (14.5) 0.68 (17.3) 0.68 (17.3) N/A .85 (21.6) .96 (24.4) 1.17 (29.7) 1.44 (36.6) 2.12 (53.8) 2.59 (65.8) 2.64 (67.1) TABLE III: Adhesive Description Material Description Color Code Symbol Adhesive Description Flexible Polyolefin General Purpose Polyolefin Zero Halogen Polyolefin High Performance Elastomer WHITE RED GREEN BLUE C Zero Halogen / Hot Melt APPLICATION NOTES (c) 2013 Glenair, Inc. 1. See bag identification for matching boot number, not number on boot. See part number development for full description. 2. Encircled material letter designator located on O.D. approximately mid length along the "J" end. See part number development for full description. 3. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-143 E-Mail: sales@glenair.com AS85049 AS85049/140 Straight Lipped Long Tail Low Profile Heat Shrink Boot Dash Number Table I Basic Part Number Material Table II See Note 2 M85049/140 - 09 B H Drain Holes Omit for None C Adhesive C = Adhesive Lined U = No Adhesive Table III D P Injection Vent Ports P = Vent Ports Omit for None P R See Note 2 H H Dia J Dia As Recovered with Drain Holes S Optional O.12 (3.05) Drain Holes (4 Places, 90 Apart) Optional O.18 (4.57) Injection Port As Supplied T (c) 2013 Glenair, Inc. JW See Note 2 H J Dia H HW .12 Ref (3.05) U As Recovered with Injection-Vent Port Optional O.12 (3.05) Vent Port Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-144 E-Mail: sales@glenair.com AS85049 AS85049/140 Straight Lipped Long Tail Low Profile Heat Shrink Boot Dash No. H Dia Min (As Supplied) 09 10 11 12 13 14 15 16 17 18 0.88 (22.4) 0.98 (24.9) 1.16 (29.5) 1.34 (34.0) 1.47 (37.3) 1.72 (43.7) 1.97 (50.0) 2.47 (62.7) 2.73 (69.3) 3.22 (81.8) TABLE I: Dash Number and Dimensions (Continued Below) H Dia J Dia Min J Dia Min J Dia P R Max (As Supplied) (As Recovered) Max (As Recovered) (As Recovered) (As Recovered) Material A, B, H Material G (As Recovered) 10% Ref 0.47 (11.9) 0.59 (15.0) 0.75 (19.1) 0.91 (23.1) 1.18 (30.0) 1.34 (34.0) 1.62 (41.1) 1.85 (47.0) 2.36 (59.9) 2.64 (67.1) 0.88 (22.4) 0.98 (24.9) 1.16 (29.5) 1.34 (34.0) 1.47 (37.3) 1.72 (43.7) 1.97 (50.0) 2.47 (62.7) 2.73 (69.3) 3.22 (81.8) 0.55 (14.0) 0.63 (16.0) 0.72 (18.3) 0.84 (21.3) 0.91 (23.1) 1.07 (27.2) 1.24 (31.5) 1.54 (39.1) 1.70 (43.2) 2.01 (51.1) 0.25 (6.4) 0.30 (7.6) 0.33 (8.4) 0.39 (9.9) 0.43 (10.9) 0.48 (12.2) 0.57 (14.5) 0.71 (18.0) 0.79 (20.1) 0.91 (23.1) 4.17 (105.9) 4.77 (121.2) 5.46 (138.7) 6.28 (159.5) 7.00 (177.8) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 0.46 (11.7) 0.48 (12.2) 0.48 (12.2) 0.48 (12.2) 0.55 (14.0) 0.60 (15.2) 0.60 (15.2) 0.63 (16.0) 0.63 (16.0) 0.63 (16.0) B TABLE I: Dash Number and Dimensions (Continued from Above) T HW JW S U Dash (As Recovered) (As Recovered) Max (As Recovered) (As Recovered) No. Ref 20% (As Recovered) 10% 10% 09 10 11 12 13 14 15 16 17 18 0.04 (1.0) 0.04 (1.0) 0.04 (1.0) 0.04 (1.0) 0.07 (1.7) 0.07 (1.7) 0.07 (1.7) 0.08 (2.0) 0.08 (2.0) 0.08 (2.0) 0.06 (1.5) 0.06 (1.5) 0.07 (1.8) 0.07 (1.8) 0.08 (2.0) 0.08 (2.0) 0.09 (2.3) 0.10 (2.5) 0.10 (2.5) 0.10 (2.5) 0.05 (1.1) 0.05 (1.1) 0.05 (1.1) 0.05 (1.1) 0.05 (1.1) 0.05 (1.1) 0.06 (1.5) 0.06 (1.5) 0.06 (1.5) 0.06 (1.5) TABLE II: Shrink Boot Materials Material Compound Code A B G H 2071 2040 2010 2025 0.23 (5.8) 0.24 (6.1) 0.47 (11.9) 0.47 (11.9) 0.47 (11.9) 0.47 (11.9) 0.30 (7.6) 0.63 (16.0) 0.63 (16.0) 0.63 (16.0) 0.56 (14.2) 0.59 (15.0) 0.61 (15.5) 0.62 (15.7) 0.71 (18.0) 0.78 (19.8) 0.82 (20.8) 0.92 (23.4) 0.93 (23.6) 1.23 (31.2) TABLE III: Adhesive Description Material Description Color Code Symbol Adhesive Description Flexible Polyolefin General Purpose Polyolefin Zero Halogen Polyolefin High Performance Elastomer WHITE RED GREEN BLUE C Zero Halogen / Hot Melt APPLICATION NOTES (c) 2013 Glenair, Inc. 1. See bag identification for matching boot number, not number on boot. See part number development for full description. 2. Encircled material letter designator located on O.D. approximately mid length along the "J" end. See part number development for full description. 3. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-145 E-Mail: sales@glenair.com AS85049 AS85049/140 Straight Lipped Miniature Long Tail High Ratio Low Profile Heat Shrink Boot Basic Part Number Dash Number Table I Material Table II See Note 2 M85049/140 - 20 B H Drain Holes Omit for None C Adhesive C = Adhesive Lined U = No Adhesive Table III R HW D P Injection Vent Ports P = Vent Ports Omit for None P .120 Ref (3.05) See Note 2 JW H H Dia J Dia As Recovered with Drain Holes T H Dia Optional O.120 (3.05) Drain Holes (4 Places, 90 Apart) S J Dia Optional O.120 (3.05) Vent Port As Supplied See Note 2 H U (c) 2013 Glenair, Inc. As Recovered with Injection-Vent Port Optional O.180 (4.57) Injection Port Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-146 E-Mail: sales@glenair.com AS85049 AS85049/140 Straight Lipped Miniature Long Tail High Ratio Low Profile Heat Shrink Boot Dash No. H Dia Min (As Supplied) 19 20 21 22 0.76 (19.3) 1.03 (26.2) 1.35 (34.3) 1.72 (43.7) TABLE I: Dash Number and Dimensions (Continued Below) H Dia J Dia Min J Dia Min J Dia P R Max (As Supplied) (As Supplied) Max (As Recovered) (As Recovered) (As Recovered) Material A, B, H Material G (As Recovered) 10% Ref 0.51 (13.0) 0.75 (19.1) 1.02 (25.9) 1.34 (34.0) 0.25 (6.4) 0.30 (7.6) 0.38 (9.7) 0.45 (11.4) 0.18 (4.6) 0.22 (5.6) 0.26 (6.6) 0.31 (7.9) 0.08 (2.0) 0.10 (2.5) 0.12 (3.0) 0.14 (3.6) 2.37 (60.2) 2.92 (74.2) 3.32 (84.3) 3.92 (99.6) 0.46 (11.7) 0.48 (12.2) 0.48 (12.2) 0.48 (12.2) B TABLE I: Dash Number and Dimensions (Continued from Above) T HW JW S U Dash (As Recovered) (As Recovered) Max (As Recovered) (As Recovered) No. 10% 20% (As Recovered) 10% 10% 19 20 21 22 0.04 (1.0) 0.04 (1.0) 0.04 (1.0) 0.07 (1.7) 0.06 (1.5) 0.07 (1.8) 0.07 (1.8) 0.07 (1.8) 0.05 (1.14) 0.05 (1.14) 0.05 (1.14) 0.05 (1.14) TABLE II: Shrink Boot Materials Material Compound Code A B G H 2071 2040 2010 2025 0.47 (11.9) 0.47 (11.9) 0.47 (11.9) 0.47 (11.9) 0.62 (15.75) 0.80 (20.32) 0.90 (22.86) 1.03 (26.16) TABLE III: Adhesive Description Material Description Color Code Symbol Adhesive Description Flexible Polyolefin General Purpose Polyolefin Zero Halogen Polyolefin High Performance Elastomer WHITE RED GREEN BLUE C Zero Halogen / Hot Melt APPLICATION NOTES (c) 2013 Glenair, Inc. 1. See bag identification for matching boot number, not number on boot. See part number development for full description. 2. Encircled material letter designator located on O.D. approximately mid length along the "J" end. See part number development for full description. 3. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-147 E-Mail: sales@glenair.com AS85049 AS85049/140 Straight Lipped Sealing Heat Shrink Boot Basic Part Number Dash Number Table I M85049/140 - 25 B Material Table II See Note 2 H C Adhesive C = Adhesive Lined U = No Adhesive Table III J Dia H Dia As Supplied T HW R .120 (3.05) Ref P JW H H Dia As Recovered (c) 2013 Glenair, Inc. J Dia See Note 2 Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-148 E-Mail: sales@glenair.com Dash No. H Dia Min (As Supplied) H Dia Max (As Recovered) 23 24 25 26 27 28 0.84 (21.3) 1.00 (25.4) 1.30 (33.0) 1.70 (43.2) 2.10 (53.3) 2.85 (72.4) 0.55 (14.0) 0.65 (16.5) 0.80 (20.3) 0.90 (22.9) 1.10 (27.9) 1.45 (36.4) TABLE I: Dash Number and Dimensions J Dia J Dia P R T HW JW Min Max (As Recovered) (As Recovered) (As Recovered) (As Recovered) Max (As Supplied) (As Recovered) 10% Ref 10% 20% (As Recovered) 0.66 (16.8) 1.00 (25.4) 1.30 (33.0) 1.70 (43.2) 2.10 (53.3) 2.85 (72.4) 0.21 (5.3) 0.33 (8.4) 0.43 (10.9) 0.56 (14.2) 0.70 (17.8) 0.95 (24.1) 5.30 (134.6) 6.00 (152.4) 6.00 (152.4) 6.90 (175.3) 6.90 (175.3) 7.24 (183.9) TABLE II: Shrink Boot Materials Material Compound Code A B G H 2071 2040 2010 2025 AS85049 AS85049/140 Straight Lipped Sealing Heat Shrink Boot 1.10 (27.9) 1.20 (30.5) 1.20 (30.5) 1.50 (38.1) 1.50 (38.1) 1.60 (40.6) 0.06 (1.5) 0.06 (1.5) 0.06 (1.5) 0.06 (1.5) 0.06 (1.5) 0.06 (1.5) 0.16 (4.1) 0.16 (4.1) 0.16 (4.1) 0.16 (4.1) 0.16 (4.1) 0.20 (5.1) 0.04 (1.0) 0.06 (1.5) 0.06 (1.5) 0.08 (2.0) 0.08 (2.0) 0.10 (2.54) TABLE III: Adhesive Description Material Description Color Code Symbol Adhesive Description Flexible Polyolefin General Purpose Polyolefin Zero Halogen Polyolefin High Performance Elastomer WHITE RED GREEN BLUE C Zero Halogen / Hot Melt APPLICATION NOTES (c) 2013 Glenair, Inc. 1. See bag identification for matching boot number, not number on boot. See part number development for full description. 2. Encircled material letter designator located on O.D. approximately mid length along the "J" end. See part number development for full description. 3. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-149 E-Mail: sales@glenair.com B AS85049 AS85049/141 90 Lipped Heat Shrink Boot Basic Part Number Dash Number Table I Material Table II See Note 2 M85049/141 - 03 B H Drain Holes Omit for None C D P Injection Vent-Ports Adhesive C = Adhesive Lined U = No Adhesive Table III Optional O.120 (3.05) Drain Holes (4 Places, 90 Apart and one on Top) Omit for None P U JW H R J Dia See Note 2 S HW T J Dia H Dia .120 Ref (3.05) As Recovered with Drain Holes H Dia Optional O.120 (3.05) Vent Port As Supplied L H Optional O.180 (4.57) Injection Port K As Recovered with Injection-Vent Port (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-150 E-Mail: sales@glenair.com Dash No. H Dia Min (As Supplied) 01 02 03 04 05 06 07 08 0.920 (23.4) 1.120 (28.4) 1.220 (31.0) 1.420 (36.1) 1.680 (42.7) 2.040 (51.8) 2.600 (66.0) 3.220 (81.8) AS85049 AS85049/141 90 Lipped Heat Shrink Boot TABLE I: Dash Number and Dimensions (Continued Below) H Dia J Dia Min J Dia Min J Dia P R Max (As Supplied) (As Supplied) Max (As Recovered) (As Recovered) (As Recovered) Material A, B, H Material G (As Recovered) 10% 10% 0.410 (10.4) 0.610 (15.5) 0.710 (18.0) 0.890 (22.6) 1.120 (28.4) 1.380 (35.1) 1.770 (45.0) 2.400 (61.0) 0.920 (23.4) 1.120 (28.4) 1.220 (31.0) 1.420 (36.1) 1.680 (42.7) 2.040 (51.8) 2.600 (66.0) 3.220 (81.8) 0.470 (11.9) 0.580 (14.7) 0.630 (16.0) 0.730 (18.5) 0.870 (22.1) 1.390 (35.3) 1.800 (45.7) 2.250 (57.2) 0.240 (6.1) 0.260 (6.6) 0.280 (7.1) 0.330 (8.4) 0.390 (9.9) 0.630 (16.0) 0.800 (20.3) 1.000 (25.4) 0.840 (21.3) 1.330 (33.8) 1.440 (36.6) 1.720 (43.7) 2.110 (53.6) 3.070 (78.0) 3.840 (97.5) 4.640 (117.9) 0.650 (16.5) 0.760 (19.3) 0.830 (21.1) 0.900 (22.9) 1.140 (29.0) 1.320 (33.5) 1.640 (41.7) 2.030 (51.6) TABLE I: Dash Number and Dimensions (Continued from Above) T HW JW S U K L Dash (As Recovered) (As Recovered) Max (As Recovered) (As Recovered) (As Recovered) (As Recovered) No. Ref 20% (As Recovered) 10% 10% 10% 10% 01 02 03 04 05 06 07 08 0.040 (1.0) 0.040 (1.0) 0.040 (1.0) 0.040 (1.0) 0.070 (1.8) 0.070 (1.8) 0.080 (2.0) 0.080 (2.0) 0.050 (1.3) 0.060 (1.5) 0.070 (1.8) 0.070 (1.8) 0.080 (2.0) 0.130 (3.3) 0.150 (3.8) 0.160 (4.1) 0.050 (1.3) 0.050 (1.3) 0.070 (1.8) 0.070 (1.8) 0.080 (2.0) 0.130 (3.3) 0.150 (3.8) 0.160 (4.1) 0.450 (11.4) 0.470 (11.9) 0.470 (11.9) 0.470 (11.9) 0.470 (11.9) 0.530 (13.5) 0.640 (16.3) 0.640 (16.3) TABLE II: Shrink Boot Materials Material Compound Code A B G H 2071 2040 2010 2025 0.470 (11.9) 1.020 (25.9) 1.090 (27.7) 1.160 (29.5) 1.470 (37.3) 2.500 (63.5) 2.750 (69.9) 3.120 (79.2) 0.600 (15.2) 0.750 (19.1) 0.750 (19.1) 0.750 (19.1) 0.760 (19.3) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 0.580 (14.7) 0.980 (24.9) 0.980 (24.9) 1.180 (30.0) 1.300 (33.0) 2.120 (53.8) 2.800 (71.1) 3.150 (80.0) TABLE III: Adhesive Description Material Description Color Code Symbol Adhesive Description Flexible Polyolefin General Purpose Polyolefin Zero Halogen Polyolefin High Performance Elastomer WHITE RED GREEN BLUE C Zero Halogen / Hot Melt APPLICATION NOTES (c) 2013 Glenair, Inc. 1. See bag identification for matching boot number, not number on boot. See part number development for full description. 2. Encircled material letter designator located on O.D. approximately mid length along the "J" end. See part number development for full description. 3. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-151 E-Mail: sales@glenair.com B AS85049 AS85049/141 90 Lipped Low Profile Heat Shrink Boot Dash Number Table I Basic Part Number Material Table II See Note 2 M85049/141 - 10 B H Drain Holes Omit for None C Adhesive C = Adhesive Lined U = No Adhesive Table III D P Injection Vent-Ports Omit for None P Optional O.120 (3.05) Drain Holes JW (4 Places, 90 Apart and on Top) J Dia H R J Dia H Dia S As Recovered with Drain Holes .120 Ref (3.05) T HW H Dia As Supplied Optional O.180 (4.57) Injection Port PP Optional O.120 (3.05) Vent Port H RR (c) 2013 Glenair, Inc. See Note 2 As Recovered with Injection-Vent Port Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 See Note 2 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-152 E-Mail: sales@glenair.com Dash No. H Dia Min (As Supplied) 09 10 11 12 13 14 15 16 17 18 0.880 (22.4) 1.010 (25.7) 1.160 (29.5) 1.340 (34.0) 1.470 (37.3) 1.720 (43.7) 1.970 (50.0) 2.470 (62.7) 2.730 (69.3) 3.220 (81.8) AS85049 AS85049/141 90 Lipped Low Profile Heat Shrink Boot TABLE I: Dash Number and Dimensions (Continued Below) H Dia J Dia Min J Dia Max J Dia P R Max (As Supplied) (As Supplied) Max (As Recovered) (As Recovered) (As Recovered) Material A, B, H Material G (As Recovered) 10% Ref 0.450 (11.4) 0.590 (15.0) 0.740 (18.8) 0.900 (22.9) 1.160 (29.5) 1.340 (34.0) 1.620 (41.1) 1.850 (47.0) 2.350 (59.7) 2.640 (67.1) 0.880 (22.4) 1.010 (25.7) 1.160 (29.5) 1.340 (34.0) 1.470 (37.3) 1.720 (43.7) 1.970 (50.0) 2.470 (62.7) 2.730 (69.3) 3.220 (81.8) 0.550 (14.0) 0.630 (16.0) 0.720 (18.3) 0.840 (21.3) 0.910 (23.1) 1.070 (27.2) 1.240 (31.5) 1.540 (39.1) 1.700 (43.2) 2.010 (51.1) 0.250 (6.4) 0.300 (7.6) 0.330 (8.4) 0.390 (9.9) 0.430 (10.9) 0.480 (12.2) 0.570 (14.5) 0.710 (18.0) 0.790 (20.1) 0.910 (23.1) 4.140 (105.2) 4.880 (124.0) 5.760 (146.3) 6.780 (172.2) 7.290 (185.2) 8.410 (213.6) 8.840 (224.5) 8.950 (227.3) 9.190 (233.4) 9.330 (237.0) 0.730 (18.5) 0.780 (19.8) 0.820 (20.8) 0.860 (21.8) 0.960 (24.4) 1.080 (27.4) 1.160 (29.5) 1.310 (33.3) 1.380 (35.1) 1.750 (44.5) B TABLE I: Dash Number and Dimensions (Continued from Above) T HW JW S PP RR Dash (As Recovered) (As Recovered) Max (As Recovered) (As Recovered) (As Recovered) No. Ref 20% (As Recovered) 10% 10% 10% 09 10 11 12 13 14 15 16 17 18 0.040 (1.0) 0.040 (1.0) 0.040 (1.0) 0.040 (1.0) 0.070 (1.8) 0.070 (1.8) 0.070 (1.8) 0.080 (2.0) 0.080 (2.0) 0.080 (2.0) 0.060 (1.5) 0.060 (1.5) 0.070 (1.8) 0.070 (1.8) 0.080 (2.0) 0.080 (2.0) 0.090 (2.3) 0.100 (2.5) 0.100 (2.5) 0.100 (2.5) 0.060 (1.5) 0.060 (1.5) 0.060 (1.5) 0.060 (1.5) 0.060 (1.5) 0.060 (1.5) 0.060 (1.5) 0.060 (1.5) 0.060 (1.5) 0.060 (1.5) 0.470 (11.9) 0.470 (11.9) 0.470 (11.9) 0.470 (11.9) 0.470 (11.9) 0.470 (11.9) 0.470 (11.9) 0.630 (16.0) 0.630 (16.0) 0.630 (16.0) TABLE II: Shrink Boot Materials Material Compound Code A B G H 2071 2040 2010 2025 0.270 (6.9) 0.330 (8.4) 0.410 (10.4) 0.480 (12.2) 0.610 (15.5) 0.720 (18.3) 0.830 (21.1) 0.950 (24.1) 1.180 (30.0) 1.310 (33.3) 0.490 (12.4) 0.590 (15.0) 0.610 (15.5) 0.620 (15.7) 0.700 (17.8) 0.780 (19.8) 0.820 (20.8) 0.920 (23.4) 0.930 (23.6) 1.230 (31.2) TABLE III: Adhesive Description Material Description Color Code Symbol Adhesive Description Flexible Polyolefin General Purpose Polyolefin Zero Halogen Polyolefin High Performance Elastomer WHITE RED GREEN BLUE C Zero Halogen / Hot Melt APPLICATION NOTES (c) 2013 Glenair, Inc. 1. See bag identification for matching boot number, not number on boot. See part number development for full description. 2. Encircled material letter designator located on O.D. approximately mid length along the "J" end. See part number development for full description. 3. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-153 E-Mail: sales@glenair.com AS85049 AS85049/141 90 Lipped Miniature Low Profile Heat Shrink Boot Basic Part Number Dash Number Table I Material Table II See Note 2 M85049/141 - 19 B H Drain Holes Omit for None C D P Injection Vent-Ports Adhesive Omit for None C = Adhesive Lined U = No Adhesive Table III P Optional O.120 (3.05) Drain Holes (4 Plcs) 90 apart and one on Top. See Note 3 JW H J Dia R S J Dia T .120 Ref (3.05) See Note 2 HW H Dia As Supplied H Dia Recovered with Drain Holes U Optional O.180 (4.57) Injection Port H Optional O.120 (3.05) Vent Port See Note 3 (c) 2013 Glenair, Inc. See Note 2 Recovered with Injection-Vent Port Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-154 E-Mail: sales@glenair.com Dash No. H Dia Min (As Supplied) 19 20 21 22 0.760 (19.3) 1.030 (26.2) 1.350 (34.3) 1.720 (43.7) AS85049 AS85049/141 90 Lipped Miniature Low Profile Heat Shrink Boot TABLE I: Dash Number and Dimensions (Continued Below) H Dia J Dia Min J Dia Max J Dia P R Max (As Supplied) (As Supplied) Max (As Recovered) (As Recovered) (As Recovered) Material A, B, H Material G (As Recovered) 10% Ref 0.510 (13.0) 0.750 (19.1) 1.020 (25.9) 1.340 (34.0) 0.250 (6.4) 0.300 (7.6) 0.380 (9.7) 0.450 (11.4) 0.180 (4.6) 0.220 (5.6) 0.260 (6.6) 0.310 (7.9) 0.080 (2.0) 0.100 (2.5) 0.120 (3.0) 0.140 (3.6) 1.750 (44.5) 2.650 (67.3) 3.200 (81.3) 4.550 (115.6) 0.640 (16.3) 0.710 (18.0) 0.740 (18.8) 0.840 (21.3) B TABLE I: Dash Number and Dimensions (Continued from Above) T HW JW S U Dash (As Recovered) (As Recovered) Max (As Recovered) (As Recovered) No. Ref 20% (As Recovered) 10% 10% 19 20 21 22 0.040 (1.0) 0.040 (1.0) 0.040 (1.0) 0.070 (1.8) 0.060 (1.5) 0.070 (1.8) 0.070 (1.8) 0.070 (1.8) 0.050 (1.1) 0.050 (1.1) 0.050 (1.1) 0.050 (1.1) 0.470 (11.90) 0.470 (11.90) 0.470 (11.90) 0.470 (11.90) TABLE II: Shrink Boot Materials Material Compound Code A B G H 2071 2040 2010 2025 0.220 (5.6) 0.330 (8.4) 0.450 (11.4) 0.610 (15.5) TABLE III: Adhesive Description Material Description Color Code Symbol Adhesive Description Flexible Polyolefin General Purpose Polyolefin Zero Halogen Polyolefin High Performance Elastomer WHITE RED GREEN BLUE C Zero Halogen / Hot Melt APPLICATION NOTES (c) 2013 Glenair, Inc. 1. See bag identification for matching boot number, not number on boot. See part number development for full description. 2. Encircled material letter designator located on O.D. approximately mid length along the "J" end. See part number development for full description. 3. Dimensions applicable for both injection and vent ports. 4. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-155 E-Mail: sales@glenair.com AS85049 AS85049/142 Tee Transition Wide Body Heat Shrink Boot Dash Number Table I Basic Part Number Material Table II See Note 2 M85049/142 - 02 B H Injection Vent-Ports Omit for None C P Adhesive C = Adhesive Lined U = No Adhesive Table III Optional O.180 (4.57) Injection Port (If Required) See Note 2 K Dia (C2) 30 10 J Dia (C1) H Dia S J Dia K Dia H Recovered 90 5 T As Supplied Optional O.12 (3.05) Vent Port (If Required) (c) 2013 Glenair, Inc. P W 3 Plcs R H Dia Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-156 E-Mail: sales@glenair.com AS85049 AS85049/142 Tee Transition Wide Body Heat Shrink Boot Dash No. H, J, K Dia Min (As Supplied) TABLE I: Dash Number and Dimension H, J, K Dia P R S T W Max (As Recovered) (As Recovered) (As Recovered) (As Recovered) (As Recovered) (As Recovered) 10% 10% 10% 10% 20% 01 02 03 04 0.260 (6.6) 0.520 (13.2) 1.060 (26.9) 2.190 (55.6) 0.140 (3.6) 0.270 (6.9) 0.530 (13.5) 1.190 (30.2) 1.170 (29.7) 2.310 (58.7) 4.730 (120.1) 9.700 (246.4) 0.580 (14.7) 1.160 (29.5) 2.360 (59.9) 4.850 (123.2) TABLE II: Shrink Boot Materials Material Compound Code A B G H 2071 2040 2010 2025 0.590 (15.0) 1.160 (29.5) 2.370 (60.2) 4.850 (123.2) N/A 0.690 (17.5) 1.400 (35.6) 2.790 (70.9) 0.040 (1.0) 0.060 (1.5) 0.090 (2.3) 0.120 (3.0) B TABLE III: Adhesive Description Material Description Color Code Symbol Adhesive Description Flexible Polyolefin General Purpose Polyolefin Zero Halogen Polyolefin High Performance Elastomer WHITE RED GREEN BLUE C Zero Halogen / Hot Melt APPLICATION NOTES (c) 2013 Glenair, Inc. 1. See bag identification for matching boot number, matching dash number on boot. See part number development for full description. 2. Encircled material letter designator located on O.D. approximately mid length along the "K" end. See part number development for full description. 3. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-157 E-Mail: sales@glenair.com AS85049 AS85049/142 Wye Transition Wide Body Heat Shrink Boot Dash Number Table I Basic Part Number Material Table II See Note 2 M85049/142 - 05 B H Injection Vent-Ports Omit for None C P Adhesive C = Adhesive Lined U = No Adhesive Table III Optional O.180 (4.57) Injection Port Optional O.120 (3.05) Vent Port R J Dia J Dia (C1) H Dia JW H Dia K Dia (C2) As Supplied (c) 2013 Glenair, Inc. HW See Note 2 2230' 5 H T KW P S As Recovered K Dia Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-158 E-Mail: sales@glenair.com AS85049 AS85049/142 Wye Transition Wide Body Heat Shrink Boot TABLE I: Dash Number and Dimensions Dash No. H Dia Min (As Supplied) H Dia Max (As Recovered) J & K Dia Min (As Supplied) J & K Dia Max (As Recovered) P (As Recovered) Ref R (As Recovered) Ref S (As Recovered) 10% T (As Recovered) 10% HW (As Recovered) 20% JW & KW (As Recovered) 20% 05 06 07 08 0.520 (13.2) 1.060 (26.9) 1.520 (38.6) 2.190 (55.6) 0.240 (6.1) 0.490 (12.4) 0.710 (18.0) 1.020 (25.9) 0.260 (6.6) 0.520 (13.2) 1.060 (26.9) 1.060 (26.9) 0.130 (3.3) 0.240 (6.1) 0.490 (12.4) 0.500 (12.7) 0.880 (22.4) 1.500 (38.1) 2.580 (65.5) 3.350 (85.1) 0.760 (19.3) 0.940 (23.9) 1.700 (43.2) 2.100 (53.3) 3.100 (78.7) 3.100 (78.7) 3.700 (94.0) 4.400 (111.8) 0.610 (15.5) 1.300 (33.0) 2.200 (55.9) 2.800 (71.1) 0.060 (1.5) 0.100 (2.5) 0.120 (3.0) 0.180 (4.6) 0.040 (1.0) 0.060 (1.5) 0.100 (2.5) 0.100 (2.5) TABLE II: Shrink Boot Materials Material Compound Code A B G H 2071 2040 2010 2025 TABLE III: Adhesive Description Material Description Color Code Symbol Adhesive Description Flexible Polyolefin General Purpose Polyolefin Zero Halogen Polyolefin High Performance Elastomer WHITE RED GREEN BLUE C Zero Halogen / Hot Melt APPLICATION NOTES (c) 2013 Glenair, Inc. 1. See bag identification for matching boot number, matching dash number on boot. See part number development for full description. 2. Encircled material letter designator located on O.D. approximately mid length along the "K" end. See part number development for full description. 3. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-159 E-Mail: sales@glenair.com B AS85049 AS85049/142 1:3 Transition Wide Body Heat Shrink Boot Basic Part Number Dash Number Table I Material Table II See Note 2 M85049/142 - 10 B H Injection Vent-Ports Omit for None C P Adhesive C = Adhesive Lined U = No Adhesive Table III K Dia (C2) H Dia P Optional O.120 (3.05) Vent Port R J Dia W (3x) See Note 2 H Dia As Supplied H U L Dia (C3) Optional O.180 (4.57) Injection Port J Dia (C1) HW S 305 Typ K Dia T Recovered (c) 2013 Glenair, Inc. L Dia Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-160 E-Mail: sales@glenair.com Dash No. 09 10 11 12 13 AS85049 AS85049/142 1:3 Transition Wide Body Heat Shrink Boot TABLE I: Dash Number and Dimensions (Continued Below) H Dia H Dia J, K, L Dia J, K, L Dia P R Min Max Min Max (As Recovered) (As Recovered) (As Supplied) (As Recovered) (As Supplied) (As Recovered) 10% Ref 0.520 (13.2) 1.060 (26.9) 1.520 (38.6) 2.190 (55.6) 3.600 (91.4) 0.260 (6.6) 0.530 (13.5) 0.750 (19.1) 1.000 (25.4) 2.150 (54.6) 0.260 (6.6) 0.520 (13.2) 0.760 (19.3) 1.060 (26.9) 1.800 (45.7) 0.140 (3.6) 0.270 (6.9) 0.380 (9.7) 0.490 (12.4) 1.080 (27.4) 1.820 (46.2) 3.670 (93.2) 5.320 (135.1) 7.560 (192.0) 15.37 (390.4) 1.000 (25.4) 1.980 (50.3) 2.900 (73.7) 4.060 (103.1) 8.310 (211.1) B TABLE I: Dash Number and Dimensions (Continued from Above) S U T HW W Dash (As Recovered) (As Recovered) (As Recovered) (As Recovered) (As Recovered) No. Ref 10% 10% 20% 20% 09 10 11 12 13 0.820 (20.8) 1.690 (42.9) 2.420 (61.5) 3.500 (88.9) 7.060 (179.3) 0.620 (15.7) 1.300 (33.0) 1.800 (45.7) 2.800 (71.1) 5.00 (127.0) 1.200 (30.5) 2.250 (57.2) 3.500 (88.9) 4.800 (121.9) 10.00 (254.0) TABLE II: Shrink Boot Materials Material Compound Code A B G H 2071 2040 2010 2025 0.060 (1.5) 0.100 (2.5) 0.120 (3.0) 0.180 (4.6) 0.280 (7.1) 0.040 (1.0) 0.060 (1.5) 0.070 (1.8) 0.120 (3.0) 0.180 (4.6) TABLE III: Adhesive Description Material Description Color Code Symbol Adhesive Description Flexible Polyolefin General Purpose Polyolefin Zero Halogen Polyolefin High Performance Elastomer WHITE RED GREEN BLUE C Zero Halogen / Hot Melt APPLICATION NOTES (c) 2013 Glenair, Inc. 1. See bag identification for matching boot number, matching dash number on boot. See part number development for full description. 2. Encircled material letter designator located on O.D. approximately mid length along the "H" end. See part number development for full description. 3. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-161 E-Mail: sales@glenair.com WHY GLENAIR? ONE GOOD REASON TO SOURCE YOUR BACKSHELLS FROM GLENAIR Outstandin Customer S g ervice! OUTSTANDING CUSTOMER SERVICE Sales, service, and support professionals standing by... when and where you need them GLENAIR, INC. * 1211 Air Way * Glendale, CA 91201-2497 * Tel: 818-247-6000 * Email: sales@glenair.com * www.glenair.com MIL-DTL-38999 MIL-DTL-38999 Qualified Connector Accessories Industry Specification Number MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999/22 Part Identification Number MS27501 MS27502 MS27510 MS27511 D38999/22 Military Part Number Superseded MS20048 MS20047 MS27352 MS27353 -- Glenair Commercial Part Number 660-012 660-013 660-014 660-015 650HS010 MIL-DTL-38999/28 D38999/28 -- Consult Factory MIL-DTL-38999/32 MIL-DTL-38999/33 MIL-DTL-38999/50 D38999/32 D38999/33 D38999/50 -- 660-023 660-024 650HS007 MIL-DTL-38999 -- Description Protective Plug Cover Protective Receptacle Cover Protective Plug Cover Protective Receptacle Cover Dummy Storage Receptacle, Threaded Coupling Jam Nut with Safety Wire Holes Composite or Metal Threaded Plug Cover Composite or Metal Threaded Receptacle Cover Dummy Storage Receptacle, Bayonet Coupling Glenair Connector Designator/ Interface Page No. MIL-DTL-38999 Series I C-2 MIL-DTL-38999 Series II C-3 MIL-DTL-38999, Series III MIL-DTL-38999 Series III & IV; EN3645 C-4 C-5 MIL-DTL-38999, Series III C-6 MIL-DTL-38999, Series IV C-7 C (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com C-1 E-Mail: sales@glenair.com MIL-DTL-38999 MS27501 and MS27502 Protective Plug and ReceptacleCovers MATING CONNECTOR Basic Part Number MS27501 = Plug Cover MS27502 = Receptacle Cover MIL-DTL-38999, Series I MS27501 A B C F T Z C .90 (22.9) Max = = = = = = C L Attachment Style C .167 (4.2) Gasket Dia .82 (20.8) Max G 19 Length (Inches) L = 5.0 (127.0) M = 6.0 (152.4) MS27501 Only N = 7.0 (177.8) MS27501 Only (Omit for Standard) Finish Gold Iridite over Cadmium over Nickel 500 Hour Cadmium Olive Drab Anodize Electroless Nickel Nickel Fluorocarbon Polymer Zinc Nickel Attachment .167 (4.2) Dia Gasket B Shell Size Attachment Option A = No Attachment C = Chain N = Chain with Ring (MS27502 Only) H J J MS27501 Plug Cover MS27502 Attachment Type N MS27502 Receptacle Cover TABLE I: Shell Size, Attachment and Dimensions Shell Size 9 11 13 15 17 19 21 23 25 G Dia Max .820 (20.8) .940 (23.9) 1.070 (27.2) 1.190 (30.2) 1.320 (33.5) 1.440 (36.6) 1.570 (39.9) 1.690 (42.9) 1.820 (46.2) H Max .820 (20.8) .940 (23.9) 1.100 (27.9) 1.220 (31.0) 1.340 (34.0) 1.460 (37.1) 1.580 (40.1) 1.700 (43.2) 1.830 (46.5) J Attachment Length (Inches) 3.000 (76.2) 3.000 (76.2) 3.500 (88.9) 3.500 (88.9) 3.500 (88.9) 3.500 (88.9) 4.000 (101.6) 4.000 (101.6) 4.000 (101.6) K Dia Min .700 (17.8) .840 (21.3) 1.010 (25.7) 1.140 (29.0) 1.260 (32.0) 1.390 (35.3) 1.510 (38.4) 1.640 (41.7) 1.760 (44.7) APPLICATION NOTES (c) 2013 Glenair, Inc. 1. Assembly identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com C-2 E-Mail: sales@glenair.com MIL-DTL-38999 MS27510 and MS27511 Protective Plug and ReceptacleCovers MATING CONNECTOR MIL-DTL-38999, Series II Basic Part Number MS27510 = Plug Cover MS27511 = Receptacle Cover MS27511 A B C F .570 (14.5) Max = = = = Finish Gold Iridite over Cadmium over Nickel 500 Hour Cadmium Olive Drab Anodize Electroless Nickel Attachment Style C .167 (4.2) Dia Gasket K B Shell Size Attachment Option A = No Attachment C = Chain N = Chain with Ring (MS27511 Only) R = Rope (MS27511 Only) 19 C Length (Inches) L = 5.0 (127.0) M = 6.0 (152.4) MS27510 Only N = 7.0 (177.8) MS27510 Only (Omit for Standard Length. Not Applicable to Style R--MS27511 Only) .570 (14.5) Max G Attachment Style C .167 (4.2) Dia Gasket H J MS27511 Attachment Type N L J MS27510 Plug Cover MS27511 Receptacle Cover TABLE I: Shell Size, Attachment and Dimensions Shell Size G Dia Max H Dia Max 8 10 12 14 16 18 20 22 24 .720 (18.3) .850 (21.6) 1.000 (25.4) 1.130 (28.7) 1.250 (31.8) 1.380 (35.1) 1.500 (38.1) 1.630 (41.4) 1.750 ( 44.5) .630 ( 16.0) .761 ( 19.3) .936 ( 23.8) 1 .074 ( 27.3) .172 ( 29.8) 1 1 .304 (33.1) 1 .435 (36.4) 1 .560 (39.6) 1.688 (42.9) J Std. Chain or Rope Length .000 ( 76.2) 3 3.000 ( 76.2) 3.500 ( 88.9) 3.500 ( 88.9) 3.500 (88.9) 3.500 ( 88.9) 4.000 (101.6) 4.000 (101.6) 4.000 (101.6) K Dia Min .890 (22.6) 1 .010 (25.7) .140 (29.0) 1 1 .260 (32.0) 1.390 (35.3) 1.510 (38.4) 1 .640 (41.7) 1 .760 (44.7) 1 .890 (48.0) APPLICATION NOTES (c) 2013 Glenair, Inc. 1. Assembly identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com C-3 E-Mail: sales@glenair.com C MIL-DTL-38999 D38999/22 Dummy Stowage Receptacle Threaded Coupling Shell Size Code MATING CONNECTOR MIL-DTL-38999 Series III D38999/22 F Sq. B W Basic Part No. E Typ. C B D Typ. C Class per Spec C = Aluminum Anodize F = Aluminum, Electroless Nickel H = Stainless Steel, Passivated (Space Grade) J = Composite, Cadmium Plated, Olive Drab K = Corrosion-Resistant Steel Passivate M = Composite, Electroless Nickel Plated N = Stainless Steel, Electrodeposited Nickel Y = Stainless Steel, Passivated G Dia A Thread TABLE I: Shell Size Code and Dimensions Shell Size Code A (See Note 4) AA (See Note 5) B C D E F G H J B -0.0 Max A Thread 9 .625-.1P-3LTS .820 (20.83) .098 (2.5) .594 (15.09) 9 .625-.1P-3LTS .820 (20.83) .098 (2.5) .594 (15.09) 11 13 15 17 19 21 23 25 .750-.1P-3LTS .875-.1P-3LTS 1.000-.1P-3LTS 1.187-.1P-3LTS 1.250-.1P-3LTS 1.375-.1P-3LTS 1.500-.1P-3LTS 1.625-.1P-3LTS .820 .820 .820 .820 .820 .790 .790 .790 (20.83) (20.83) (20.83) (20.83) (20.83) (20.07) (20.07) (20.07) .098 .098 .098 .098 .098 .126 .126 .126 (2.5) (2.5) (2.5) (2.5) (2.5) (3.2) (3.2) (3.2) .719 .812 .906 .969 1.062 1.156 1.250 1.375 (18.26) (20.62) (23.01) (24.61) (26.97) (29.36) (31.75) (34.93) +.012 TABLE I: Shell Size Code and Dimensions Shell Size Code A B C D E F G H J Shell Size Ref. 9 11 13 15 17 19 21 23 25 (c) 2013 Glenair, Inc. E .719 .812 .906 .969 1.062 1.156 1.250 1.375 1.500 C Shell Size Ref. (18.26) (20.62) (23.01) (24.61) (26.97) (29.36) (31.75) (34.93) (38.10) F -0.0 +.012 (0.3) .937 (23.8) 1.031 (26.2) 1.126 (28.6) 1.220 (31.0) 1.311 (33.3) 1.437 (36.5) 1.563 (39.7) 1.689 (42.9) 1.811 (46.0) OG +.008 (0.2) .128 (3.25) .128 (3.25) .128 (3.25) .128 (3.25) .128 (3.25) .128 (3.25) .128 (3.25) .154 (3.91) .154 (3.91) D (0.3) APPLICATION NOTES 1. 2. 3. 4. 5. Assembly to be identified with manufacturer's name and part number, space permitting. For complete dimensions, see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Shell size code "A" is for polarization C, E and N only. Shell size code "AA" is for polarization A, B and D only. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com C-4 E-Mail: sales@glenair.com MIL-DTL-38999 D38999/28 Jam Nut CONNECTOR DESIGNATOR: H Material and Finish C = Aluminum Anodize F = Aluminum, Electroless Nickel K = Corrosion-Resistant Steel Passivate W = Aluminum, Cadmium Olive Drab over Electroless Nickel MIL-DTL-38999 Series III and IV, EN3645 Basic Part Number D38999/28 - 11 A Dash No. B C C Safety Wire Holes (Min. 3 Holes Equally Spaced) A Thread TABLE I: Reference for Connector Shell Size Dash No. Shell Size Series Series III IV A Thread Class 2B 1 9 -M17 X 1 - 6H* 2 11 -M20 X 1 - 6H* 3 13 11 M25 X 1 - 6H 4 15 13 M28 X 1 - 6H 5 -15 M31 X 1 - 6H 6 17 -M32 X 1 - 6H 7 -17 M34 X 1 - 6H 8 19 -M35 X 1 - 6H 9 21 19 M38 X 1 - 6H 10 23 21 M41 X 1 - 6H 11 25 23 M44 X 1 - 6H 12 -25 M47 X 1 - 6H *Modified Minor Diameter B Hex Max .945 1.063 1.260 1.417 1.614 1.457 1.614 1.614 1.811 1.969 2.017 2.165 (24.00) (27.00) (32.00) (36.00) (41.00) (37.00) (41.00) (41.00) (46.00) (50.00) (51.23) (55.00) C .018 -.000 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 (.45) (.00) (3.17) (3.17) (3.17) (3.17) (3.17) (3.17) (3.17) (3.17) (3.17) (3.17) (3.17) (3.17) APPLICATION NOTES 1. 2. 3. (c) 2013 Glenair, Inc. Assembly identified with manufacturer's name and part number, space permitting. For complete dimensions, see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com C-5 E-Mail: sales@glenair.com MIL-DTL-38999 D38999/32 and D38999/33 Composite or Metal Protective Covers Plug and Receptacle * MIL-DTL-38999 Series III Threaded MATING CONNECTOR Basic Part Number D38999/32 = Plug Cover D38999/33 = Receptacle Cover MIL-DTL-38999, Series III Threaded APPLICATION NOTES 1. C D38999/32 Assembly identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Metric dimensions (mm) are in parentheses. Shell Size Designator W 15 Attachment Style R or N N Material and Finish C = Aluminum, Hard Anodize F = Aluminum, Electroless Nickel H = Stainless Steel, Passivated (Space Grade) J = Composite, Cadmium, Olive Drab K = Stainless Steel, Passivated M = Composite, Electroless Nickel N = Stainless Steel, Electrodeposited Nickel T = Aluminum, Nickel Fluorocarbon Polymer W = Aluminum, Cadmium Olive Drab Z = Aluminum, Black Zinc-Nickel 1.18 (30.0) Max Gasket Style N Style R .167 (4.2) Dia. D38999/32 PLUG COVER J Dia F Length ** ** Rope Length 5.000 (127.0) +.50 (+13.0) -.25 (-7.0) E Thread Gasket .906 (23.0) Max E Thread D38999/33 RECEPTACLE COVER Style N Style R .167 (4.2) Dia. H Dia G Length ** TABLE I: Shell Size, Thread and Dimensions Shell Size 9 11 13 15 17 19 21 23 25 (c) 2013 Glenair, Inc. E Thread .6250-0.1P-0.3L-TS .7500-0.1P-0.3L-TS .8750-0.1P-0.3L-TS 1.0000-0.1P-0.3L-TS 1.1875-0.1P-0.3L-TS 1.2500-0.1P-0.3L-TS 1.3750-0.1P-0.3L-TS 1.5000-0.1P-0.3L-TS 1.6250-0.1P-0.3L-TS F Max .906 (23.0) 1.024 ( 26.0) 1.220 ( 31.0) 1.300 ( 33.0) 1.457 ( 37.0) 1.575 ( 40.0) 1.732 ( 44.0) 1.811 (46.0) 1.969 ( 50.0) G Max .906 (23.0) 1.102 (28.0) 1.220 (31.0) 1.260 (32.0) 1.457 (37.0) 1.535 (39.0) 1.654 (42.0) 1.772 (45.0) 1.929 (49.0) H Min .694 (17.6) .865 (22.0) .989 (25.1) 1.178 (29.9) 1.260 (32.0) 1.428 (36.3) 1.506 (38.3) 1.678 (42.6) 1.750 (44.5) J Min .512 (13.0) .709 (18.0) .787 (20.0) .906 (23.0) 1.024 (26.0) 1.142 (29.0) 1.260 (32.0) 1.339 (34.0) 1.535 (39.0) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Rev. 10.19.18 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com C-6 E-Mail: sales@glenair.com MIL-DTL-38999 D38999/50 Dummy Stowage Receptacle Bayonet Coupling MATING CONNECTOR Basic Part No. MIL-DTL-38999 Series IV D38999/50 Class Per Spec. (Finish is Cadmium Olive Drab over Electroles Nickel B W Shell Size Code .819/.756 (20.8/19.2) A Sq. D C C B Sq. E TABLE I: Dash Number, Cable Entry and Backshell Dimensions A Shell Size Code Shell Size Ref. .043 (1.10) B C D E F G H J 11 13 15 17 19 21 23 25 1.030 1.124 1.219 1.313 1.439 1.561 1.687 1.813 (26.15) (28.55) (30.95) (33.35) (36.55) (39.65) (42.85) (46.05) B BSC .812 .906 .969 1.062 1.156 1.250 1.375 1.500 (20.62) (23.02) (24.62) (26.98) (29.36) (31.76) (34.92) (38.10) +0 -.015 .793 .919 1.044 1.170 1.294 1.419 1.544 1.669 C (0.00) (-0.39) (20.15) (23.35) (26.52) (29.72) (32.87) (36.05) (39.22) (42.40) D OE .010 (0.25) .008 (0.2) .093 .093 .093 .093 .093 .124 .124 .124 (2.35) (2.35) (2.35) (2.35) (2.35) (3.15) (3.15) (3.15) .130 .130 .130 .130 .130 .130 .150 .150 (3.3) (3.3) (3.3) (3.3) (3.3) (3.3) (3.8) (3.8) APPLICATION NOTES 1. Assembly to be identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Metric dimensions (mm) are in parentheses. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com C-7 E-Mail: sales@glenair.com WHY GLENAIR? ANOTHER GOOD REASON TO SOURCE YOUR BACKSHELLS FROM GLENAIR Paul Winkler a Glenair Northern Californi Sales Group NATIONWIDE TECH SUPPORT Technical support and application engineering is offered nationwide by over 100 Glenair field representatives GLENAIR, INC. * 1211 Air Way * Glendale, CA 91201-2497 * Tel: 818-247-6000 * Email: sales@glenair.com * www.glenair.com MIL-DTL-28840 MIL-DTL-28840 Qualified Backshells and Connector Accessories Industry Specification Number Part Identification Number Military Part Number Superseded Glenair Commercial Part Number MIL-DTL-28840/1 M28840/1 -- 620GS051 Straight Non-Self-Locking Strain Relief MIL-DTL-28840/2 M28840/2 -- 620GA051 90 Non-Self-Locking Strain Relief MIL-DTL-28840/3 M28840/3 -- 620GB051 45 Non-Self-Locking Strain Relief MIL-DTL-28840/4 M28840/4 -- -- Metal-Core Conduit MIL-DTL-28840/5 M28840/5 -- -- Straight Backshell for Metal-Core Conduit MIL-DTL-28840/6 M28840/6 A M28840/6 B -- 390AB001 370 Series Strt. EMI/RFI Environmental Backshell, Style A Straight Environmental Backshell, Style B MIL-DTL-28840/7 M28840/7 -- 650GS001 Dummy Storage Receptacle, Threaded Coupling MIL-DTL-28840/8 -- 390-061 -- 390-061 MIL-DTL-28840/13 MIL-DTL-28840/15 M28840/8M28840/8 A M28840/9 B M28840/9 A M28840/13 M28840/15 -- 660-010 660-011 MIL-DTL-28840/22 M28840/22 -- -- MIL-DTL-28840/23 M28840/23 -- Consult Factory E Nut, Non-Self-Locking MIL-DTL-28840/24 M28840/24 -- Consult Factory Gasket MIL-DTL-28840/9 (c) 2013 Glenair, Inc. Description 90 Environmental Backshell, Style A 90 EMI/RFI Environmental Backshell, Style B 45 Environmental Backshell, Style A 45 EMI/RFI Environmental Backshell Protective Threaded Receptacle Cover Protective Threaded Plug Cover Glenair Connector Designator/ Interface "G" MIL-DTL-28840 "G" MIL-DTL-28840 "G" MIL-DTL-28840 "G" MIL-DTL-28840 "G" MIL-DTL-28840 "G" MIL-DTL-28840 "G" MIL-DTL-28840 "G" MIL-DTL-28840 "G" MIL-DTL-28840 MIL-DTL-28840 "G" MIL-DTL-28840 "G" MIL-DTL-28840 "G" MIL-DTL-28840 Metal-Core Conduit Bushing Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Page No. D-2 D-3 D-4 D-5 D-6 D-7 D-8 D-9 D-10 D-11 D-12 D-13 D-14 D-15 D-16 D-17 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com D-1 E-Mail: sales@glenair.com D MIL-DTL-28840 MIL-DTL-28840/1 Straight Non-Self-Locking Strain Relief Basic Part Number Designator M28840/1 J CONNECTOR DESIGNATOR: G MIL-DTL-28840 W Material and Finish D = Corrosion Resistant Steel, Cadmium Plate, Black W = Aluminum, Cadmium Olive Drab A Thread D .228 (5.79) Ref. C Cable Entry B Wire Holes (3 Equally Spaced) D Telescoping Screw and Lockwasher TABLE I: Shell Size, Cable Entry and Backshell Dimensions Designator A B C D E F G H J Shell Size Ref. 11 13 15 17 19 23 25 29 33 A Thread Class 2B .750 - 20 UNEF .875 - 20 UNEF 1.000 - 20 UNEF 1.125 - 18 UNEF 1.250 - 18 UNEF 1.438 - 18 UNEF 1.562 - 18 UNEF 1.875 - 16 UN 2.062 - 16 UNS B Max 1.028 (26.1) 1.141 (29.0) 1.263 (32.1) 1.387 (35.2) 1.513 (38.4) 1.703 (43.3) 1.825 (46.4) 2.143 (54.4) 2.329 (59.2) C Max 1.091 (27.7) 1.091 (27.7) 1.091 (27.7) 1.206 (30.6) 1.320 (33.5) 1.445 (36.7) 1.570 (39.9) 1.721 (43.7) 1.908 (48.5) D Max .903 (22.9) .977 (24.8) 1.151 (29.2) 1.281 (32.5) 1.406 (35.7) 1.576 (40.0) 1.666 (42.3) 2.046 (52.0) 2.209 (56.1) Cable Entry Closed Open .177 (4.5) .286 (7.3) .177 (4.5) .286 (7.3) .250 (6.4) .416 (10.6) .291 (7.4) .476 (12.1) .348 (8.8) .626 (15.9) .429 (10.9) .831 (21.1) .523 (13.3) .956 (24.3) .643 (16.3) 1.081 (27.5) (17.9) 1.187 (30.1) .704 APPLICATION NOTES 1. Assembly to be identified with manufacturer's name and part number, space permitting. 2. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 3. For complete dimensions, see the applicable Military Specification. 4. Metric dimensions (mm) are in parentheses. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. Rev. 12.13.18 U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com D-2 E-Mail: sales@glenair.com MIL-DTL-28840 MIL-DTL-28840/2 90 Non-Self-Locking Strain Relief Basic Part Number Designator M28840/2 J CONNECTOR DESIGNATOR: G MIL-DTL-28840 W Material and Finish D = Corrosion Resistant Steel, Cadmium Plate, Black W = Aluminum, Cadmium Olive Drab A Thread .228 (5.79) Ref. Wire Holes (3 Equally Spaced) E D C G Cable Entry Telescoping Screw and Lockwasher F TABLE I: Shell Size, Cable Entry and Backshell Dimensions Desig- Shell Size nator Ref. A 11 B 13 C 15 D 17 E 19 F 23 G 25 H 29 J 33 A Thread Class 2B .750 - 20 UNEF .875 - 20 UNEF 1.000 - 20 UNEF 1.125 - 18 UNEF 1.250 - 18 UNEF 1.438 - 18 UNEF 1.562 - 18 UNEF 1.875 - 16 UN 2.062 - 16 UNS C Max 1.028 (26.1) 1.141 (29.0) 1.263 (32.1) 1.387 (35.2) 1.513 (38.4) 1.703 (43.3) 1.825 (46.4) 2.143 (54.4) 2.329 (59.2) E Max 1.071 (27.2) 1.071 (27.2) 1.280 (32.5) 1.392 (35.4) 1.517 (38.5) 1.642 (41.7) 1.767 (44.9) 1.905 (48.4) 1.968 (50.0) F Max .903 (22.9) .977 (24.8) 1.151 (29.2) 1.281 (32.5) 1.406 (35.7) 1.576 (40.0) 1.666 (42.3) 2.046 (52.0) 2.209 (56.1) G Max .929 (23.6) .929 (23.6) 1.056 (26.8) 1.233 (31.3) 1.296 (32.9) 1.358 (34.5) 1.420 (36.1) 1.634 (41.5) 1.859 (47.2) .177 .177 .250 .291 .348 .429 .523 .643 .704 Min Cable Entry (4.5) (4.5) (6.4) (7.4) (8.8) (10.9) (13.3) (16.3) (17.9) Max .286 (7.3) .286 (7.3) .416 (10.6) .476 (12.1) .626 (15.9) .831 (21.1) .956 (24.3) 1.081 (27.5) 1.187 (30.1) APPLICATION NOTES 1. Assembly to be identified with manufacturer's name and part number, space permitting. 2. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 3. For complete dimensions, see the applicable Military Specification. 4. Metric dimensions (mm) are in parentheses. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com D-3 E-Mail: sales@glenair.com MIL-DTL-28840 MIL-DTL-28840/3 45 Non-Self-Locking Strain Relief CONNECTOR DESIGNATOR: G MIL-DTL-28840 Basic Part Number Designator M28840/3 J W Material and Finish D = Corrosion Resistant Steel, Cadmium Plate, Black W = Aluminum, Cadmium Olive Drab A Thread D .228 (5.79) Ref. E Wire Holes (3 Equally Spaced) C G Telescoping Screw and Lockwasher Cable Entry F TABLE I: Shell Size, Cable Entry and Backshell Dimensions Desig- Shell Size nator Ref. A 11 B 13 C 15 D 17 E 19 F 23 G 25 H 29 J 33 A Thread Class 2B .750 - 20 UNEF .875 - 20 UNEF 1.000 - 20 UNEF 1.125 - 18 UNEF 1.250 - 18 UNEF 1.438 - 18 UNEF 1.562 - 18 UNEF 1.875 - 16 UN 2.062 - 16 UNS C Max 1.028 (26.1) 1.141 (29.0) 1.263 (32.1) 1.387 (35.2) 1.513 (38.4) 1.703 (43.3) 1.825 (46.4) 2.143 (54.4) 2.329 (59.2) E Max 1.650 (41.9) 1.650 (41.9) 1.765 (44.8) 1.874 (47.6) 1.918 (48.7) 1.962 (49.8) 2.006 (51.0) 2.301 (58.4) 2.389 (60.7) F Max .903 (22.9) .977 (24.8) 1.151 (29.2) 1.281 (32.5) 1.406 (35.7) 1.576 (40.0) 1.666 (42.3) 2.046 (52.0) 2.209 (56.1) G Max .929 (23.6) .929 (23.6) 1.056 (26.8) 1.233 (31.3) 1.296 (32.9) 1.358 (34.5) 1.420 (36.1) 1.634 (41.5) 1.859 (47.2) .177 .177 .250 .291 .348 .429 .523 .643 .704 Min Cable Entry (4.5) (4.5) (6.4) (7.4) (8.8) (10.9) (13.3) (16.3) (17.9) Max .286 (7.3) .286 (7.3) .416 (10.6) .476 (12.1) .626 (15.9) .831 (21.1) .956 (24.3) 1.081 (27.5) 1.187 (30.1) APPLICATION NOTES 1. Assembly to be identified with manufacturer's name and part number, space permitting. 2. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 3. For complete dimensions, see the applicable Military Specification. 4. Metric dimensions (mm) are in parentheses. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com D-4 E-Mail: sales@glenair.com MIL-DTL-28840 M28840/4 Metal Core Conduit Military Designator M28840/4 Type Designator A - Plain B - Insulator Jacket 12 A C Material Type Conduit Size C - Brass E - Nickel-Iron Conduit Neoprene Jacket Braid Conduit Nominal Conduit I.D. D A Dia Order Length 50 Ft. Max. (c) 2013 Glenair, Inc. Size Nominal Conduit Inside Diameter A Diameter Over Shield .010 (0.25) 03 .375 (9.52) .525 (13.34) .688 (17.47) 04 .500 (12.70) .650 (16.51) .812 (20.62) 05 .625 (15.87) .765 (19.43) .937 (23.79) 06 .750 (19.05) .925 (23.50) 08 1.00 (25.40) 1.210 (30.73) 10 1.25 (31.75) 1.455 (36.96) 1.695 (43.05) 12 1.500 (38.10) 1.725 (43.82) 1.956 (49.68) 16 2.000 (50.80) 2.200 (55.88) 2.469 (62.71) L 50 ft. Max. B Diameter Max Over Jacket 1.078 (27.38) 1.437 (36.49) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com D-5 E-Mail: sales@glenair.com MIL-DTL-28840 M28840/5 Backshell for Metal Core Conduit Military Designator Material Type W - Aluminum, Cadmium Plate, O.D. over Electroless Nickel D - Corrosion Resistant Steel, Cadmium Plate, Black Dash Number M28840/5 16 W A Type Designator A - EMI / Environmental B - EMI / Environmental A Thread D .50 (12.7) Max D Cable Range C E STYLE A - EMI/Non-Environmental (Plain Conduit) A Thread D O-Rings 1.75 (44.5) Max Cable Range C F STYLE B - EMI/Environmental (Jacket Conduit) (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com D-6 E-Mail: sales@glenair.com MIL-DTL-28840 MIL-DTL-28840/6 Style A Straight EMI/RFI Environmental Backshell CONNECTOR DESIGNATOR: G Material and Finish D = Corrosion Resistant Steel, Cadmium Plate, Black W = Aluminum, Cadmium Olive Drab MIL-DTL-28840 M28840/6 Basic Part Number 16 Dash No. (Table II) W A Style A = EMI/Environmental D TABLE II: Dash Number, Shell Size, Dimensions and Cable Range TABLE I: Shell Size and Dimensions Shell Size A Thread Class 2B C Dia Max 11 .750 - 20 UNEF 1.028 (26.1) 13 .875 - 20 UNEF 1.141 (29.0) 15 1.000 - 20 UNEF 1.263 (32.1) 17 1.125 - 18 UNEF 1.387 (35.2) 19 1.250 - 18 UNEF 1.513 (38.4) 23 1.438 - 18 UNEF 1.703 (43.3) 25 1.562 - 18 UNEF 1.825 (46.4) 29 1.875 - 16 UN 2.143 (54.4) 33 2.062 - 16 UNS 2.329 (59.2) APPLICATION NOTES 1. 2. 3. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. (c) 2013 Glenair, Inc. Dash No. Shell Size E .120 (3.0) F Ref Dim G Ref Dim Cable Range Min Max 01 11 3.62 (91.9) 1.281 (32.5) .938 (23.8) .188 (4.8) 02 13 3.62 (91.9) 1.281 (32.5) .938 (23.8) .188 (4.8) .312 (7.9) 03 13 3.62 (91.9) 1.281 (32.5) 1.125 (28.6) .281 (7.1) .438 (11.1) 04 15 3.62 (91.9) 1.281 (32.5) .938 (23.8) .188 (4.8) .312 (7.9) 05 15 3.62 (91.9) 1.281 (32.5) 1.125 (28.6) .281 (7.1) .438 (11.1) 06 15 3.62 (91.9) 1.281 (32.5) 1.312 (33.3) .344 (8.7) .562 (14.3) 07 15 4.12 (104.6) 1.312 (33.3) 1.593 (40.5) .438 (11.1) .750 (19.1) 08 17 4.12 (104.6) 1.281 (32.5) 1.312 (33.3) .375 (9.5) .625 (15.9) 09 17 4.12 (104.6) 1.312 (33.3) 1.593 (40.5) .438 (11.1) .750 (19.1) 10 17 4.12 (104.6) 1.406 (35.7) 1.750 (44.5) .625 (15.9) .938 (23.8) 11 19 4.12 (104.6) 1.281 (32.5) 1.312 (33.3) .375 (9.5) .625 (15.9) 12 19 4.12 (104.6) 1.406 (35.7) 1.750 (44.5) .625 (15.9) .938 (23.8) 13 23 4.62 (117.3) 1.312 (33.3) 1.593 (40.5) .438 (11.1) .750 (19.1) 14 23 4.62 (117.3) 1.406 (35.7) 1.750 (44.5) .625 (15.9) .938 (23.8) 15 23 4.62 (117.3) 1.593 (40.5) 2.093 (53.2) .812 (20.6) 1.188 (30.2) 16 25 4.62 (117.3) 1.406 (35.7) 1.750 (44.5) .625 (15.9) .938 (23.8) 17 25 5.12 (130.0) 1.593 (40.5) 2.093 (53.2) .812 (20.6) 1.188 (30.2) 18 25 5.12 (130.0) 1.593 (40.5) 2.093 (53.2) .875 (22.2) 1.250 (31.8) 19 25 5.12 (130.0) 1.625 (41.3) 2.343 (59.5) 1.000 (25.4) 1.380 (35.1) 20 29 5.12 (130.0) 1.593 (40.5) 2.093 (53.2) .812 (20.6) 1.188 (30.2) 21 29 5.12 (130.0) 1.625 (41.3) 2.343 (59.5) 1.000 (25.4) 1.380 (35.1) 22 33 5.12 (130.0) 1.625 (41.3) 2.343 (59.5) 1.000 (25.4) 1.380 (35.1) 23 33 5.12 (130.0) 1.900 (48.3) 2.750 (69.9) 1.250 (31.8) 1.625 (41.3) 24 11 3.62 (91.9) 1.281 (32.5) 1.125 (28.6) .281 (7.1) .438 (11.1) 25 11 3.62 (91.9) 1.281 (32.5) 1.312 (33.3) .344 (8.7) .562 (14.3) 26 13 3.62 (91.9) 1.281 (32.5) 1.312 (33.3) .344 (8.7) .562 (14.3) 27 13 4.12 (104.6) 1.281 (32.5) 1.312 (33.3) .375 (9.5) .625 (15.9) 28 15 4.12 (104.6) 1.281 (32.5) 1.312 (33.3) .375 (9.5) .625 (15.9) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 .312 (7.9) Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com D-7 E-Mail: sales@glenair.com MIL-DTL-28840 MIL-DTL-28840/6 Style B Straight Environmental Backshell CONNECTOR DESIGNATOR: G MIL-DTL-28840 Basic Part Number Material and Finish D = Corrosion Resistant Steel, Cadmium Plate, Black W = Aluminum, Cadmium Olive Drab M28840/6 16 Dash Number (Table II) W B Style Designator B = Environmental D TABLE II: Dash Number and Dimensions Dash No. APPLICATION NOTES 1. 2. 3. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. TABLE I: Shell Size C Dia Max Shell Size Ref. E .12 (3.0) F Ref. Dim G Ref. Dim Cable Range Min Max 01 11 3.620 (91.9) 1.281 (32.5) .938 (23.8) .188 (4.8) .312 (7.9) 02 13 3.620 (91.9) 1.281 (32.5) .938 (23.8) .188 (4.8) .312 (7.9) 03 13 3.620 (91.9) 1.281 (32.5) 1.125 (28.6) .281 (7.1) .438 (11.1) 04 15 3.620 (91.9) 1.281 (32.5) .938 (23.8) .188 (4.8) .312 (7.9) 05 15 3.620 (91.9) 1.281 (32.5) 1.125 (28.6) .281 (7.1) .438 (11.1) 06 15 3.620 (91.9) 1.281 (32.5) 1.312 (33.3) .344 (8.7) .562 (14.3) 07 15 4.120 (104.6) 1.312 (33.3) 1.593 (40.5) .438 (11.1) .750 (19.1) 08 17 4.120 (104.6) 1.281 (32.5) 1.312 (33.3) .375 (9.5) .625 (15.9) 09 17 4.120 (104.6) 1.312 (33.3) 1.593 (40.5) .438 (11.1) .750 (19.1) 10 17 4.120 (104.6) 1.406 (35.7) 1.750 (44.5) .625 (15.9) .938 (23.8) 11 19 4.120 (104.6) 1.281 (32.5) 1.312 (33.3) .375 (9.5) .625 (15.9) 12 19 4.120 (104.6) 1.406 (35.7) 1.750 (44.5) .625 (15.9) .938 (23.8) 13 23 4.620 (117.3) 1.312 (33.3) 1.593 (40.5) .438 (11.1) .750 (19.1) 14 23 4.620 (117.3) 1.406 (35.7) 1.750 (44.5) .625 (15.9) .938 (23.8) 15 23 4.620 (117.3) 1.593 (40.5) 2.003 (50.9) .812 (20.6) 1.188 (30.2) 16 25 4.620 (117.3) 1.406 (35.7) 1.750 (44.5) .625 (15.9) .938 (23.8) 17 25 5.120 (130.0) 1.593 (40.5) 2.093 (53.2) .812 (20.6) 1.188 (30.2) 1.250 (31.8) Shell Size A Thread Class 2B 18 25 5.120 (130.0) 1.593 (40.5) 2.093 (53.2) .875 (22.2) 11 .750 - 20 UNEF 1.030 (26.2) 19 25 5.120 (130.0) 1.625 (41.3) 2.343 (59.5) 1.000 (25.4) 1.380 (35.1) 13 .875 - 20 UNEF 1.140 (29.0) 20 29 5.120 (130.0) 1.593 (40.5) 2.093 (53.2) .812 (20.6) 1.188 (30.2) 15 1.000 - 20 UNEF 1.260 (32.0) 1.380 (35.1) 17 1.125 - 18 UNEF 1.390 (35.3) 19 1.250 - 18 UNEF 1.510 (38.4) 23 1.438 - 18 UNEF 1.700 (43.2) 25 1.563 - 18 UNEF 1.820 (46.2) 29 1.875 - 16 UN 2.140 (54.4) 33 2.063 - 16 UNS 2.330 (59.2) (c) 2013 Glenair, Inc. 21 29 5.120 (130.0) 1.625 (41.3) 2.343 (59.5) 1.000 (25.4) 22 33 5.120 (130.0) 1.625 (41.3) 2.343 (59.5) 1.000 (25.4) 1.380 (35.1) 23 33 5.120 (130.0) 1.900 (48.3) 2.750 (69.9) 1.250 (31.8) 1.625 (41.3) 24 11 3.620 (91.9) 1.281 (32.5) 1.125 (28.6) .281 (7.1) .438 (11.1) 25 11 3.620 (91.9) 1.281 (32.5) 1.312 (33.3) .344 (8.7) .562 (14.3) 26 13 3.620 (91.9) 1.281 (32.5) 1.312 (33.3) .344 (8.7) .562 (14.3) 27 13 4.120 (104.6) 1.281 (32.5) 1.312 (33.3) .375 (9.5) .625 (15.9) 28 15 4.120 (104.6) 1.281 (32.5) 1.312 (33.3) .375 (9.5) .625 (15.9) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com D-8 E-Mail: sales@glenair.com MIL-DTL-28840 M28840/7 Dummy Stowage Receptacle Threaded Coupling Key Positions (1, 2, 3, 4, 5, or 6) Basic Part No. MATING CONNECTOR MIL-DTL-28840 M28840/7 G 1 Shell Size Designator C .898 / .878 (22.8 / 22.3) B .130 / .100 (3.3 / 2.5) D A Thread D Dia 4 Holes Shell Size Designator A B C D E F G H J TABLE I: Dash Number, Cable Entry and Backshell Dimensions Shell Size Ref. 11 13 15 17 19 23 25 29 33 E Thread 0.750-0.1P-0.2L-DS 0.875-0.1P-0.2L-DS 1.062-0.1P-0.2L-DS 1.125-0.1P-0.2L-DS 1.312-0.1P-0.2L-DS 1.500-0.1P-0.2L-DS 1.625-0.1P-0.2L-DS 1.812-0.1P-0.2L-DS 2.000-0.1P-0.2L-DS B Dim .750 (19.1) .843 (21.4) .968 (24.6) 1.015 (25.8) 1.140 (29.0) 1.281 (32.5) 1.392 (35.4) 1.568 (39.8) 1.734 (44.0) C Max 1.043 (26.5) 1.158 (29.4) 1.278 (32.5) 1.403 (35.6) 1.528 (38.8) 1.738 (44.1) 1.838 (46.7) 2.158 (54.8) 2.348 (59.6) D Max .130 (3.3) .130 (3.3) .130 (3.3) .130 (3.3) .130 (3.3) .130 (3.3) .157 (4.0) .157 (4.0) .183 (4.6) APPLICATION NOTES (c) 2013 Glenair, Inc. 1. Assembly to be identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Material/Finish: Aluminum Alloy/Cadmium Olive Drab. 4. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com D-9 E-Mail: sales@glenair.com MIL-DTL-28840 MIL-DTL-28840/8 Style A 90 EMI/RFI Environmental Backshell CONNECTOR DESIGNATOR: G Material and Finish D = Corrosion Resistant Steel, Cadmium Plate, Black W = Aluminum, Cadmium Olive Drab MIL-DTL-28840 M28840/8 Basic Part Number 16 Dash No. (Table II) W A Style A = EMI/Environmental TABLE II: Dash Number, Shell Size, Dimensions and Cable Range Dash No. D TABLE I: Shell Size and Dimensions Shell Size A Thread Class 2B C Dia Max 11 .750 - 20 UNEF 1.028 (26.1) 13 .875 - 20 UNEF 1.141 (29.0) 15 1.000 - 20 UNEF 1.263 (32.1) 17 1.125 - 18 UNEF 1.387 (35.2) 19 1.250 - 18 UNEF 1.513 (38.4) 23 1.438 - 18 UNEF 1.703 (43.3) 25 1.562 - 18 UNEF 1.825 (46.4) 29 1.875 - 16 UN 2.143 (54.4) 33 2.062 - 16 UNS 2.329 (59.2) (c) 2013 Glenair, Inc. Shell Size E Max Envelope F Max G Ref Dim Cable Range Min Max 01 11 2.614 (66.4) 5.332 (135.4) .938 (23.8) .188 (4.8) .312 (7.9) 02 13 2.614 (66.4) 5.332 (135.4) .938 (23.8) .188 (4.8) .312 (7.9) 03 13 2.614 (66.4) 5.332 (135.4) 1.125 (28.6) .281 (7.1) .438 (11.1) 04 15 2.864 (72.7) 5.457 (138.6) .938 (23.8) .188 (4.8) .312 05 15 2.864 (72.7) 5.457 (138.6) 1.125 (28.6) .281 (7.1) .438 (11.1) 06 15 2.864 (72.7) 5.457 (138.6) 1.312 (33.3) .344 (8.7) .562 (14.3) 07 15 3.114 (79.1) 5.682 (144.3) 1.593 (40.5) .438 (11.1) .750 (19.1) 08 17 3.114 (79.1) 5.682 (144.3) 1.312 (33.3) .375 (9.5) .625 (15.9) 09 17 3.114 (79.1) 5.713 (145.1) 1.593 (40.5) .438 (11.1) .750 (19.1) 10 17 3.114 (79.1) 5.807 (147.5) 1.750 (44.5) .625 (15.9) .938 (23.8) 11 19 3.114 (79.1) 5.682 (144.3) 1.312 (33.3) .375 (9.5) .625 (15.9) 12 19 3.364 (85.4) 5.832 (148.1) 1.750 (44.5) .625 (15.9) .938 (23.8) 13 23 3.364 (85.4) 5.738 (145.7) 1.593 (40.5) .438 (11.1) .750 (19.1) 14 23 3.364 (85.4) 5.832 (148.1) 1.750 (44.5) .625 (15.9) .938 (23.8) 15 23 3.364 (85.4) 6.019 (152.9) 2.093 (53.2) .812 (20.6) 1.188 (30.2) 16 25 3.364 (85.4) 5.832 (148.1) 1.750 (44.5) .625 (15.9) .938 (23.8) 17 25 3.364 (85.4) 6.019 (152.9) 2.093 (53.2) .812 (20.6) 1.188 (30.2) 18 25 3.614 (91.8) 6.144 (156.1) 2.093 (53.2) .875 (22.2) 1.250 (31.8) 19 25 3.614 (91.8) 6.176 (156.9) 2.343 (59.5) 1.000 (25.4) 1.380 (35.1) 20 29 3.614 (91.8) 6.144 (156.1) 2.093 (53.2) .812 (20.6) 1.188 (30.2) 21 29 3.614 (91.8) 6.176 (156.9) 2.343 (59.5) 1.000 (25.4) 1.380 (35.1) 22 33 4.114 (104.5) 6.426 (163.2) 2.343 (59.5) 1.000 (25.4) 1.380 (35.1) 23 33 4.114 (104.5) 6.701 (170.2) 2.750 (69.9) 1.250 (31.8) 1.625 (41.3) 24 11 2.614 (66.4) 5.332 (135.4) 1.125 (28.6) .281 (7.1) .438 (11.1) 25 11 2.864 (72.7) 5.457 (138.6) 1.312 (33.3) .344 (8.7) .562 (14.3) 26 13 2.864 (72.7) 5.457 (138.6) 1.312 (33.3) .344 (8.7) .562 (14.3) 27 13 3.114 (79.1) 5.682 (144.3) 1.312 (33.3) .375 (9.5) .625 (15.9) 28 15 3.114 (79.1) 5.682 (144.3) 1.312 (33.3) .375 (9.5) .625 (15.9) (7.9) APPLICATION NOTES 1. 2. 3. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com D-10 E-Mail: sales@glenair.com MIL-DTL-28840 MIL-DTL-28840/8 Style B 90 Environmental Backshell CONNECTOR DESIGNATOR: G MIL-DTL-28840 Basic Part Number Material and Finish D = Corrosion Resistant Steel, Cadmium Plate, Black W = Aluminum, Cadmium Olive Drab M28840/8 16 Dash Number (Table II) W B Style Designator B = Environmental TABLE II: Dash Number and Dimensions Dash No. TABLE I: Shell Size Shell Size A Thread Class 2B C Dia Max 11 .750 - 20 UNEF 1.030 (26.2) 13 .875 - 20 UNEF 1.140 (29.0) 15 1.000 - 20 UNEF 1.260 (32.0) 17 1.125 - 18 UNEF 1.390 (35.3) 19 1.250 - 18 UNEF 1.510 (38.4) 23 1.438 - 18 UNEF 1.700 (43.2) 25 1.563 - 18 UNEF 29 1.875 - 16 UN 33 2.063 - 16 UNS 2.330 (59.2) 2. 3. F Max G Ref. Dim Cable Range Min Max 01 11 2.614 (66.4) 2.962 (75.2) .938 (23.8) .188 (4.8) .312 (7.9) 02 13 2.614 (66.4) 2.962 (75.2) .938 (23.8) .188 (4.8) .312 (7.9) 03 13 2.614 (66.4) 2.962 (75.2) 1.125 (28.6) .281 (7.1) .438 (11.1) .312 (7.9) 04 15 2.864 (72.7) 3.087 (78.4) .938 (23.8) .188 (4.8) 05 15 2.864 (72.7) 3.087 (78.4) 1.125 (28.6) .281 (7.1) .438 (11.1) 06 15 2.864 (72.7) 3.087 (78.4) 1.312 (33.3) .344 (8.7) .562 (14.3) 07 15 3.114 (79.1) 3.312 (84.1) 1.593 (40.5) .438 (11.1) .750 (19.1) 08 17 3.114 (79.1) 3.312 (84.1) 1.312 (33.3) .375 (9.5) .625 (15.9) 09 17 3.114 (79.1) 3.343 (84.9) 1.593 (40.5) .438 (11.1) .750 (19.1) 10 17 3.114 (79.1) 3.437 (87.3) 1.750 (44.5) .625 (15.9) .938 (23.8) 11 19 3.114 (79.1) 3.312 (84.1) 1.312 (33.3) .375 (9.5) .625 (15.9) 12 19 3.364 (85.4) 3.462 (87.9) 1.750 (44.5) .625 (15.9) .938 (23.8) 13 23 3.364 (85.4) 3.368 (85.5) 1.593 (40.5) .438 (11.1) .750 (19.1) 14 23 3.364 (85.4) 3.462 (87.9) 1.750 (44.5) .625 (15.9) .938 (23.8) 15 23 3.364 (85.4) 3.649 (92.7) 2.093 (53.2) .812 (20.6) 1.188 (30.2) 16 25 3.364 (85.4) 3.462 (87.9) 1.750 (44.5) .625 (15.9) .938 (23.8) 17 25 3.364 (85.4) 3.649 (92.7) 2.093 (53.2) .812 (20.6) 1.188 (30.2) 18 25 3.614 (91.8) 3.774 (95.9) 2.093 (53.2) .875 (22.2) 1.250 (31.8) 25 3.614 (91.8) 3.806 (96.7) 2.343 (59.5) 1.000 (25.4) 1.380 (35.1) 20 29 3.614 (91.8) 3.774 (95.9) 2.093 (53.2) .812 (20.6) 1.188 (30.2) 1.820 (46.2) 21 29 3.614 (91.8) 3.806 (96.7) 2.343 (59.5) 1.000 (25.4) 1.380 (35.1) 2.140 (54.4) 22 33 4.114 (104.5) 4.056 (103.0) 2.343 (59.5) 1.000 (25.4) 1.380 (35.1) 4.114 (104.5) 4.331 (110.0) 1.625 (41.3) For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. (c) 2013 Glenair, Inc. E Max Envelope 19 APPLICATION NOTES 1. Shell Size Ref. 23 33 2.750 (69.9) 1.250 (31.8) 24 11 2.614 (66.4) 2.962 (75.2) 1.125 (28.6) .281 (7.1) .438 (11.1) 25 11 2.864 (72.7) 3.087 (78.4) 1.312 (33.3) .344 (8.7) .562 (14.3) 26 13 2.864 (72.7) 3.087 (78.4) 1.312 (33.3) .344 (8.7) .562 (14.3) 27 13 3.114 (79.1) 3.312 (84.1) 1.312 (33.3) .375 (9.5) .625 (15.9) 28 15 3.114 (79.1) 3.312 (84.1) 1.312 (33.3) .375 (9.5) .625 (15.9) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com D-11 E-Mail: sales@glenair.com D MIL-DTL-28840 MIL-DTL-28840/9 Style A 45 EMI/RFI Environmental Backshell CONNECTOR DESIGNATOR: G Material and Finish D = Corrosion Resistant Steel, Cadmium Plate, Black W = Aluminum, Cadmium Olive Drab MIL-DTL-28840 M28840/9 Basic Part Number 16 Dash No. (Table II) W A Style A = EMI/Environmental D TABLE I: Shell Size and Dimensions Shell Size 11 13 15 17 19 23 25 29 33 C Dia A Thread Max Class 2B .750 - 20 UNEF 1.028 (26.1) .875 - 20 UNEF 1.141 (29.0) 1.000 - 20 UNEF 1.263 (32.1) 1.125 - 18 UNEF 1.387 (35.2) 1.250 - 18 UNEF 1.513 (38.4) 1.438 - 18 UNEF 1.703 (43.3) 1.562 - 18 UNEF 1.825 (46.4) 1.875 - 16 UN 2.143 (54.4) 2.062 - 16 UNS 2.329 (59.2) APPLICATION NOTES 1. 2. 3. (c) 2013 Glenair, Inc. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com D-12 E-Mail: sales@glenair.com MIL-DTL-28840 MIL-DTL-28840/9 45 Environmental Backsheli Style B CONNECTOR DESIGNATOR: G MIL-DTL-28840 Material and Finish D = Corrosion Resistant Steel, Cadmium Plate, Black W = Aluminum, Cadmium Olive Drab Basic Part Number M28840/9 16 W B Style Designator B = Environmental Dash Number (Table II) TABLE II: Dash Number, Dimensions and Cable Range Dash No. TABLE I: Shell Size C Dia Max Shell Size A Thread Class 2B 11 .750 - 20 UNEF 1.030 (26.2) 13 .875 - 20 UNEF 1.140 (29.0) 15 1.000 - 20 UNEF 1.260 (32.0) 17 1.125 - 18 UNEF 1.390 (35.3) 19 1.250 - 18 UNEF 1.510 (38.4) 23 1.438 - 18 UNEF 1.700 (43.2) 25 1.563 - 18 UNEF 29 1.875 - 16 UN 33 2.063 - 16 UNS 2. 3. F Ref. Dim G Ref. Dim Cable Range Min Max 01 11 1.031 (26.2) 1.281 (32.5) .938 (23.8) .188 (4.8) .312 (7.9) 02 13 1.031 (26.2) 1.281 (32.5) .938 (23.8) .188 (4.8) .312 (7.9) 03 13 1.031 (26.2) 1.281 (32.5) 1.125 (28.6) .281 (7.1) .438 (11.1) 04 15 1.156 (29.4) 1.281 (32.5) .938 (23.8) .188 (4.8) .312 (7.9) 05 15 1.156 (29.4) 1.281 (32.5) 1.125 (28.6) .281 (7.1) .438 (11.1) 06 15 1.156 (29.4) 1.281 (32.5) 1.312 (33.3) .344 (8.7) .562 (14.3) .750 (19.1) 07 15 1.281 (32.5) 1.312 (33.3) 1.593 (40.5) .438 (11.1) 08 17 1.281 (32.5) 1.281 (32.5) 1.312 (33.3) .375 (9.5) .625 (15.9) 09 17 1.281 (32.5) 1.312 (33.3) 1.593 (40.5) .438 (11.1) .750 (19.1) .938 (23.8) 10 17 1.281 (32.5) 1.406 (35.7) 1.750 (44.5) .625 (15.9) 11 19 1.281 (32.5) 1.281 (32.5) 1.312 (33.3) .375 (9.5) .625 (15.9) 12 19 1.406 (35.7) 1.406 (35.7) 1.750 (44.5) .625 (15.9) .938 (23.8) 13 23 1.406 (35.7) 1.312 (33.3) 1.593 (40.5) .438 (11.1) .750 (19.1) 14 23 1.406 (35.7) 1.406 (35.7) 1.750 (44.5) .625 (15.9) .938 (23.8) 1.188 (30.2) 15 23 1.406 (35.7) 1.593 (40.5) 2.093 (53.2) .812 (20.6) 25 1.406 (35.7) 1.406 (35.7) 1.750 (44.5) .625 (15.9) .938 (23.8) 1.820 (46.2) 17 25 1.406 (35.7) 1.593 (40.5) 2.093 (53.2) .812 (20.6) 1.188 (30.2) 2.140 (54.4) 18 25 1.531 (38.9) 1.593 (40.5) 2.093 (53.2) .875 (22.2) 1.250 (31.8) 2.330 (59.2) 19 25 1.531 (38.9) 1.625 (41.3) 2.343 (59.5) 1.000 (25.4) 1.380 (35.1) For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. (c) 2013 Glenair, Inc. E Max 16 APPLICATION NOTES 1. Shell Size Ref. 20 29 1.531 (38.9) 1.593 (40.5) 2.093 (53.2) .812 (20.6) 1.188 (30.2) 21 29 1.531 (38.9) 1.625 (41.3) 2.343 (59.5) 1.000 (25.4) 1.380 (35.1) 22 33 1.781 (45.2) 1.625 (41.3) 2.343 (59.5) 1.000 (25.4) 1.380 (35.1) 23 33 1.781 (45.2) 1.900 (48.3) 2.750 (69.9) 1.250 (31.8) 1.625 (41.3) 24 11 1.031 (26.2) 1.281 (32.5) 1.125 (28.6) .281 (7.1) .438 (11.1) 25 11 1.156 (29.4) 1.281 (32.5) 1.312 (33.3) .344 (8.7) .562 (14.3) 26 13 1.156 (29.4) 1.281 (32.5) 1.312 (33.3) .344 (8.7) .562 (14.3) 27 13 1.281 (32.5) 1.281 (32.5) 1.312 (33.3) .375 (9.5) .625 (15.9) 28 15 1.281 (32.5) 1.281 (32.5) 1.312 (33.3) .375 (9.5) .625 (15.9) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com D-13 E-Mail: sales@glenair.com D MIL-DTL-28840 M28840/13 and M28840/15 Protective Plug and Receptacle Covers Basic Part Number M28840/13 = Receptacle Cover M28840/15 = Plug Cover MATING CONNECTOR MIL-DTL-28840 APPLICATION NOTES 1. Assembly identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Metric dimensions (mm) are in parentheses. Shell Size Designator M28840/13 H Material and Finish D = Corrosion Resistant Steel, Cadmium Plate, Black W = Aluminum, 500 Hour, Cadmium O.D. A W Attachment Style A = Chain with Fastener B = Chain with Ring for Jam Nut Receptacle (M28840/13 Only) B = Chain with Ring (M28840/15 Only) C = Chain with Ring for Cable Receptacle (M28840/13 Only) .780 (19.8) Max 1.000 (25.4) Max Gasket D Attachment Style A .156 (4.0) Dia Attachment Style A J Dia F F 5.0 (127.0) 5.0 (127.0) E Thread E Thread M28840/15 Plug Cover M28840/13 Receptacle Cover G H for Type B K for Type C M28840/13 Attachment Types B & C MS28840/15 Attachment Type B TABLE I: Shell Size Designator, Thread and Dimensions Shell Size Desig. A B C D E F G H J (c) 2013 Glenair, Inc. Shell Size Ref. 11 13 15 17 19 23 25 29 33 E Thread 0.750-0.1P-0.2L-DS 0.875-0.1P-0.2L-DS 1.062-0.1P-0.2L-DS 1.125-0.1P-0.2L-DS 1.312-0.1P-0.2L-DS 1.500-0.1P-0.2L-DS 1.625-0.1P-0.2L-DS 1.812-0.1P-0.2L-DS 2.000-0.1P-0.2L-DS F Max 1.028 (26.1) 1.141 (29.0) 1.263 (32.1) 1.387 (35.2) 1.513 (38.4) 1.703 (43.3) 1.825 (46.4) 2.143 (54.4) 2.329 (59.2) G Dia .010 (0.3) .765 (19.4) .890 (22.6) 1.015 (25.8) 1.140 (29.0) 1.265 (32.1) 1.453 (36.9) 1.577 (40.1) 1.890 (48.0) 2.077 (52.8) H Dia .010 (0.3) .890 (22.6) 1.015 (25.8) 1.203 (30.6) 1.265 (32.1) 1.453 (36.9) 1.640 (41.7) 1.765 (44.8) 1.953 (49.6) 2.140 (54.4) J Dia .005 (0.1) .130 (3.3) .130 (3.3) .130 (3.3) .130 (3.3) .130 (3.3) .130 (3.3) .156 (4.0) .156 (4.0) .193 (4.9) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 K Dia .010 (0.3) .765 (19.4) .890 (22.6) 1.015 (25.8) 1.140 (29.0) 1.265 (32.1) 1.453 (36.9) 1.577 (40.1) 1.890 (48.0) 2.077 (52.8) Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com D-14 E-Mail: sales@glenair.com MIL-DTL-28840 M28840/22 Metal Core Conduit Bushing Material Designator Military Designator S - Corrosion resistant steel Passivate IAW SAE-AMS-QQ-P-35 M28840/22 S A Dash Number 1.50 (38.1) .03 (.8) D D Dia B Dia A Dia C Dia Size MILDTL-28840/04 Size Ref. A +.020 (.50) -.000 (.000) B +.005 (.12) -.000 (.000) C +.000 (.000) -.005 (.12) D +.000 (.000) -.005 (.12) 03 03 .375 (9.53) .540 (13.71) .625 (15.87) .525 (13.34) 04 04 .500 (12.70) .665 (16.89) .750 (19.05) .650 (16.51) 05 05 .625 (15.87) .780 (19.81) .875 (22.23) .775 (19.69) 06 06 .750 (19.05) .940 (23.88) 1.000 (25.40) .900 (22.86) 08 08 1.000 (25.40) 1.225 (31.12) 1.375 (34.93) 1.275 (32.39) 10 10 1.250 (31.75) 1.470 (37.34) 1.625 (41.28) 1.525 (38.74) 12 12 1.500 (38.10) 1.740 (44.20) 1.875 (47.65) 1.775 (45.09) 16 16 2.000 (50.80) 2.215 (56.26) 2.375 (60.33) 2.275 (57.79) (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com D-15 E-Mail: sales@glenair.com MIL-DTL-28840 MIL-DTL-28840/23 Non-Self-Locking E-Nut Basic Part Number CONNECTOR DESIGNATOR: G MIL-DTL-28840 Shell Size M28840/23 - J W Material and Finish D = Corrosion Resistant Steel, Cadmium Plate, Black W = Aluminum, Cadmium Olive Drab .718 (18.2) .062 (1.6) .228 (5.8) Ref. A Thread D B Ring Clearance Hole For .032 (.8) Dia. Safety Wire (3 Places 120 Apart) Captive Coupling Nut TABLE I: Shell Size, Shell Size Ref, Thread and Dimensions Shell Size A B C D E F G H J Shell Size Ref. 11 13 15 17 19 23 25 29 33 A Thread Class 2B .750 - 20 UNEF .875 - 20 UNEF 1.000 - 20 UNEF 1.125 - 18 UNEF 1.250 - 18 UNEF 1.438 - 18 UNEF 1.562 - 18 UNEF 1.875 - 16 UN 2.062 - 16 UNS (c) 2013 Glenair, Inc. OB Max 1.028 (26.1) 1.141 (29.0) 1.263 (32.1) 1.387 (35.2) 1.513 (38.4) 1.703 (43.3) 1.825 (46.4) 2.143 (54.4) 2.329 (59.2) APPLICATION NOTES 1. 2. 3. 4. Assembly to be identified with manufacturer's name and part number, space permitting. For complete dimensions, see the applicable Military Specification. Cable entry is defined as the accomodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com D-16 E-Mail: sales@glenair.com MIL-DTL-28840 M28840/24 Gasket Basic Part Number M28840/24 Material A = Florinated Silicone B = EMI Shielding - Rubber G A Designator C Square D A Square D Dia (4 Places) B Dia TABLE I: Reference for Connector Shell Size Designator Shell Size A B C D E F G H J 11 13 15 17 19 23 25 29 33 A Sq. .010 .750 .843 .968 1.015 1.140 1.281 1.392 1.568 1.734 OB (.3) (19.1) (21.4) (24.6) (25.8) (29.0) (32.5) (35.4) (39.8) (44.0) .008 .758 .883 1.070 1.133 1.320 1.508 1.633 1.883 2.070 C Sq. OD (.2) .008 (.2) .010 (.3) (19.3) (22.4) (27.2) (28.8) (33.5) (38.3) (41.5) (47.8) (52.6) 1.031 1.146 1.266 1.391 1.516 1.726 1.826 2.146 2.336 (26.2) (29.1) (32.2) (35.3) (38.5) (43.8) (46.4) (54.5) (59.3) .120 .120 .120 .120 .120 .120 .147 .147 .173 (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.7) (3.7) (4.4) APPLICATION NOTES 1. 2. 3. (c) 2013 Glenair, Inc. Assembly identified with manufacturer's name and part number, space permitting. For complete dimensions, see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com D-17 E-Mail: sales@glenair.com WHY GLENAIR? ANOTHER GOOD REASON TO SOURCE YOUR BACKSHELLS FROM GLENAIR d Availability: Connector oduct Line lindrical erse Selection of Cy World! or Accessories in the skilled operators, and acity, raw materials, and commercial every military-standard ed of stock parts are stag y. Tens of thousands just 2-3 weeks. are es cial order lead-tim sory Every Connector Acces There Is! "NO GAPS" Glenair supplies every active MS backshell and connector accessory--no gaps--most with same-day availability GLENAIR, INC. * 1211 Air Way * Glendale, CA 91201-2497 * Tel: 818-247-6000 * Email: sales@glenair.com * www.glenair.com MIL-DTL-83723 MIL-DTL-83723 Qualified Backshells and Connector Accessories Industry Specification Number Part Identification Number Military Part Number Superseded Glenair Commercial Part Number MIL-DTL-83723/27 M83723/27M -- 310KS002 -- Consult Factory -- Consult Factory MS27292 MS27293 MS27294 MS27295 -- 660-021 660-022 660-019 660-020 Consult Factory MIL-DTL-83723/35 MIL-DTL-83723/50 MIL-DTL-83723/59 MIL-DTL-83723/60 MIL-DTL-83723/59 MIL-DTL-83723/60 MIL-DTL-83723/70 M83723/35S M83723/35A M83723/35N M83723/50 R M83723/50 B M83723/50 A M83723/59-1 M83723/60-1 M83723/59-2 M83723/60-2 M83723/70 Glenair Connector Designator/ Interface "K" MIL-DTL-83723 Series II Description Straight Shrink Boot Adapter Strt. Non-Environmental Strain Relief Backshell 90 Non-Environmental Strain Relief Backshell Non-Self-Locking E-Nut Straight Qwik-Ty(R) Strain Relief 45 Qwik-Ty(R) Strain Relief 90 Qwik-Ty(R) Strain Relief Protective Plug Cover, Threaded Coupling Protective Receptacle Cover, Threaded Coupling Protective Plug Cover Bayonet Coupling Protective Receptacle Cover Bayonet Coupling Straight Quick Disconnect Receptacle Adapter Page No. E-2 "K" MIL-DTL-83723 Series II E-3 E-4 E-5 K" MIL-DTL-83723 Series II E-6 MIL-DTL-83723, Series III E-7 MIL-DTL-83723, Series III E-8 -- E-9 E (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-1 E-Mail: sales@glenair.com MIL-DTL-83723 M83723/27M Straight Shrink Boot Adapter CONNECTOR DESIGNATOR: K Basic Part Number MIL-DTL-83723 Series II M83723/27M Shell Size 22 M Backshell Only E TABLE I: Adapter Size, Shell Size, Thread and Dimensions Adapter Size Shell Size Ref. A Thread Class 2B B Dia Max E Dia F Dia Min G Max 08 8S .438 - 28 UNEF .580 (14.7) .250 (6.4) .479 (12.2) .830 (21.1) 10 10S .500 - 28 UNEF .640 (16.3) .303 (7.7) .539 (13.7) .830 (21.1) 11 10SL .562 - 24 UNEF .700 (17.8) .383 (9.7) .608 (15.4) .830 (21.1) 12 12 .625 - 24 UNEF .760 (19.3) .408 (10.4) .659 (16.7) .830 (21.1) 13 12S .625 - 24 UNEF .760 (19.3) .408 (10.4) .659 (16.7) .830 (21.1) 14 14 .750 - 20 UNEF .890 (22.6) .490 (12.4) .782 (19.9) .830 (21.1) 16 14S .750 - 20 UNEF .890 (22.6) .490 (12.4) .782 (19.9) .830 (21.1) 16 16 .875 - 20 UNEF 1.010 (25.7) .609 (15.5) .908 (23.1) .996 (25.3) 17 16S .875 - 20 UNEF 1.010 (25.7) .609 (15.5) .908 (23.1) .830 (21.1) 18 18 1.000 - 20 UNEF 1.140 (29.0) .730 (18.5) 1.025 (26.0) .996 (25.3) 20 20 1.125 - 18 UNEF 1.260 (32.0) .870 (22.1) 1.212 (30.8) .996 (25.3) 22 22 1.250 - 18 UNEF 1.390 (35.3) .978 (24.8) 1.343 (34.1) .996 (25.3) 24 24 1.375 - 18 UNEF 1.520 (38.6) 1.090 (27.7) 1.450 (36.8) .996 (25.3) 28 28 1.625 - 18 UNEF 1.760 (44.7) 1.250 (31.8) 1.671 (42.4) 1.076 (27.3) 32 32 1.875 - 16 UN 2.010 (51.1) 1.520 (38.6) 1.956 (49.7) 1.076 (27.3) 36 36 2.125 - 16 UN 2.260 (57.4) 1.756 (44.6) 2.164 (55.0) 1.076 (27.3) 40 40 2.375 - 16 UN 2.510 (63.8) 1.880 (47.8) 2.500 (63.5) 1.222 (31.0) (c) 2013 Glenair, Inc. APPLICATION NOTES 1. 2. 3. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 For complete dimensions see the applicable Military Specification. Finish: Electroless Nickel. Metric dimensions (mm) are in parentheses. Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-2 E-Mail: sales@glenair.com MIL-DTL-83723 M83723/35S Straight Non-Environmental Strain Relief Backshell CONNECTOR DESIGNATOR: K Basic Part Number MIL-DTL-83723 Series II Shell Size M83723/35S - 22 Finish A = Anodize Black R = Electroless Nickel APPLICATION NOTES 1. 2. 3. A For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. E TABLE I: Shell Size, Cable Range and Dimensions B Dia Max E Max F Max Cable Range Min Max Shell Size Shell Size (s) (Ref) A Thread Class 2B 08 8S .438 - 28 UNEF .585 (14.9) 1.290 (32.8) .843 (21.4) .125 (3.2) .235 (6.0) 10 10S .500 - 28 UNEF .645 (16.4) 1.290 (32.8) .843 (21.4) .125 (3.2) .235 (6.0) 11 10SL .562 - 24 UNEF .730 (18.5) 1.290 (32.8) .906 (23.0) .170 (4.3) .297 (7.5) 13 12 & 12S .625 - 24 UNEF .770 (19.6) 1.290 (32.8) 1.085 (27.6) .170 (4.3) .297 (7.5) 15 14 & 14S .750 - 20 UNEF .910 (23.1) 1.368 (34.7) 1.093 (27.8) .235 (6.0) .422 (10.7) 16 16 .875 - 20 UNEF 1.035 (26.3) 1.587 (40.3) 1.275 (32.4) .295 (7.5) .547 (13.9) 17 16S .875 - 20 UNEF 1.035 (26.3) 1.430 (36.3) 1.187 (30.1) .295 (7.5) .547 (13.9) 18 18 1.000 - 20 UNEF 1.170 (29.7) 1.695 (43.1) 1.475 (37.5) .325 (8.3) .610 (15.5) 20 20 1.125 - 18 UNEF 1.300 (33.0) 1.695 (43.1) 1.500 (38.1) .380 (9.7) .735 (18.7) 22 22 1.250 - 18 UNEF 1.420 (36.1) 1.695 (43.1) 1.710 (43.4) .380 (9.7) .735 (18.7) 24 24 1.375 - 18 UNEF 1.535 (39.0) 1.931 (49.0) 1.719 (43.7) .500 (12.7) .922 (23.4) 28 28 1.625 - 18 UNEF 1.800 (45.7) 1.931 (49.0) 2.040 (51.8) .500 (12.7) .922 (23.4) 32 32 1.875 - 16 UNEF 2.035 (51.6) 1.869 (47.5) 2.332 (59.2) .705 (17.9) 1.235 (31.4) 36 36 2.125 - 16 UN 2.270 (57.7) 1.869 (47.5) 2.312 (58.7) .725 (18.4) 1.360 (34.5) 40 40 2.375 - 16 UN 2.780 (70.6) 2.875 (73.0) 2.950 (74.9) .911 (23.1) 1.630 (41.4) (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Mil-Spec Backshells Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-3 E-Mail: sales@glenair.com MIL-DTL-83723 M83723/35A 90 Non-Environmental Strain Relief Backshell CONNECTOR DESIGNATOR: K MIL-DTL-83723 Series II Basic Part Number Shell Size M83723/35A - 22 A Finish A = Anodize Black R = Electroless Nickel E TABLE I: Shell Size, Cable Range and Dimensions APPLICATION NOTES 1. 2. 3. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. (c) 2013 Glenair, Inc. B Dia Max E Max F Max Cable Range Min Max Shell Size A Thread Class 2B 08 .438 - 28 UNEF .805 (20.4) 1.187 (30.1) 1.220 (31.0) .102 (2.6) .235 (6.0) 10 .500 - 28 UNEF .890 (22.6) 1.187 (30.1) 1.250 (31.8) .102 (2.6) .235 (6.0) 11 .562 - 24 UNEF .975 (24.8) 1.312 (33.3) 1.280 (32.5) .140 (3.6) .297 (7.5) 13 .625 - 24 UNEF 1.005 (25.5) 1.312 (33.3) 1.280 (32.5) .140 (3.6) .297 (7.5) 12 .625 - 24 UNEF 1.005 (25.5) 1.468 (37.3) 1.280 (32.5) .140 (3.6) .297 (7.5) 15 .750 - 20 UNEF 1.130 (28.7) 1.437 (36.5) 1.405 (35.7) .195 (5.0) .422 (10.7) 14 .750 - 20 UNEF 1.130 (28.7) 1.594 (40.5) 1.405 (35.7) .195 (5.0) .422 (10.7) 17 .875 - 20 UNEF 1.255 (31.9) 1.531 (38.9) 1.529 (38.8) .255 (6.5) .547 (13.9) 16 .875 - 20 UNEF 1.255 (31.9) 1.687 (42.8) 1.529 (38.8) .255 (6.5) .547 (13.9) 18 1.000 - 20 UNEF 1.350 (34.3) 1.765 (44.8) 1.593 (40.5) .285 (7.2) .610 (15.5) 20 1.125 - 18 UNEF 1.475 37.5) 2.000 (50.8) 1.655 (42.0) .350 (8.9) .735 (18.7) 22 1.250 - 18 UNEF 1.600 (40.6) 2.000 (50.8) 1.718 (43.6) .350 (8.9) .735 (18.7) 24 1.375 - 18 UNEF 1.725 (43.8) 2.265 (57.5) 1.894 (48.1) .468 (11.9) .922 (23.4) 28 1.625 - 18 UNEF 1.975 (50.2) 2.265 (57.5) 1.973 (50.1) .468 (11.9) .922 (23.4) 32 1.875 - 16 UN 2.225 56.5) 2.578 (65.5) 2.187 (55.5) .664 (16.9) 1.235 (31.4) 36 2.125 - 16 UN 2.475 (62.9) 2.815 (71.5) 2.405 (61.1) .694 (17.6) 1.360 (34.5) 40 2.375 - 16 UN 2.750 (69.9) 5.800 (147.3) 5.100 (129.5) .911 (23.1) 1.630 (41.4) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-4 E-Mail: sales@glenair.com MIL-DTL-83723 M83723/35N Non-Self-Locking E-Nut CONNECTOR DESIGNATOR: K Finish A = Black Anodize R = Electroless Nickel Basic Part Number MIL-DTL-83723 Series II M83723/35N - 22 A Dash No. E A Thread G F B E Grounding Screws (2) (Typical) TABLE I: Dash Number, Shell Size, Thread and Dimensions Dash Shell Size No. Ref. 08 10 11 13 15 16 17 18 20 22 24 28 32 36 40 8S 10S 10SL 12S 14S 16 16S 18 33 20 22 28 32 36 40 A Thread Class 2B .438 - 28 UNEF .500 - 28 UNEF .562 - 24 UNEF .625 - 24 UNEF .750 - 20 UNEF .875 - 20 UNEF .875 - 20 UNEF 1.000 - 20 UNEF 1.125 - 18 UNEF 1.250 - 18 UNEF 1.375 - 18 UNEF 1.625 - 18 UNEF 1.875 - 16 UN 2.125 - 16 UN 2.375 - 16 UN (c) 2013 Glenair, Inc. OB Max .59 .65 .73 .77 .91 1.03 1.03 1.17 1.30 1.42 1.54 1.80 2.04 2.27 2.78 (15.0) (16.5) (18.5) (19.6) (23.1) (26.2) (26.2) (29.7) (33.0) (36.1) (39.1) (45.7) (51.8) (57.7) (70.6) E Max .780 .780 .780 .780 .780 .970 .780 1.050 1.050 1.050 .970 .970 .970 .970 1.450 F Max (19.8) (19.8) (19.8) (19.8) (19.8) (24.6) (19.8) (26.7) (26.7) (26.7) (24.6) (24.6) (24.6) (24.6) (36.8) .257 .310 .390 .415 .497 .616 .616 .735 .875 .983 1.095 1.255 1.525 1.760 2.020 (6.5) (7.9) (9.9) (10.5) (12.6) (15.6) (15.6) (18.7) (22.2) (25.0) (27.8) (31.9) (38.7) (44.7) (51.3) APPLICATION NOTES G Max .900 .900 .980 .995 1.160 1.260 1.260 1.455 1.580 1.580 1.890 1.890 2.215 2.405 2.781 (22.9) (22.9) (24.9) (25.3) 29.5) (32.0) (32.0) (37.0) (40.1) (40.1) (48.0) (48.0) (56.3) (61.1) (70.6) Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 1. For complete dimensions, see the applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-5 E-Mail: sales@glenair.com MIL-DTL-83723 M83723/50 Straight, 45 and 90 Qwik-Ty(R) Strain Reliefs Non-Self-Locking CONNECTOR DESIGNATOR: K Basic Part Number M83723/50R = Straight M83723/50B = 45 M83723/50A = 90 MIL-DTL-83723, Series II Angular Function R = Straight B = 45 A = 90 M83723/50 A Thread Typ. Set Screw (Typ.) F D Typ. R Shell Size Finish A = Black Anodize N = Electroless Nickel 22 N H G E J E E MS3367-1 Tie Strap or Equivalent (Typical) E TABLE I: Shell Size, Thread, Cable Entry and Backshell Dimensions Shell Size A Thread Class 2B 08 10 11 12 13 14 15 16 17 18 20 22 24 28 .438 - 28 UNEF .500 - 28 UNEF .562 - 24 UNEF .625 - 24 UNEF .625 - 24 UNEF .750 - 20 UNEF .750 - 20 UNEF .875 - 20 UNEF .875 - 20 UNEF 1.000 - 20 UNEF 1.125 - 18 UNEF 1.250 - 18 UNEF 1.375 - 18 UNEF 1.625 - 18 UNEF D Dia Max .620 .730 .730 .860 .860 .980 .980 1.110 1.110 1.220 1.350 1.470 1.590 1.970 E Max Cable Entry (15.7) .240 (18.5) .295 (18.5) .375 (21.8) .400 (21.8) .400 (24.9) .482 (24.9) .482 (28.2) .601 (28.2) .601 (31.0) .722 (34.3) .862 (37.3) .970 (40.4) 1.082 (50.0) 1.241 (6.1) (7.5) (9.5) (10.2) (10.2) (12.2) (12.2) (15.3) (15.3) (18.3) (21.9) (24.6) (27.5) (31.5) F Max 1.060 1.060 1.060 1.120 1.120 1.300 1.310 1.300 1.300 1.360 1.500 1.620 1.680 1.710 (26.9) (26.9) (26.9) (28.4) (28.4) (33.0) (33.3) (33.0) (33.0) (34.5) (38.1) (41.1) (42.7) (43.4) G Max .740 .740 .740 .740 .740 2.010 2.020 2.010 2.010 2.170 2.250 2.250 2.330 2.330 (18.8) (18.8) (18.8) (18.8) (18.8) (51.1) (51.3) (51.1) (51.1) (55.1) (57.2) (57.2) (59.2) (59.2) H Max .710 .710 .710 .710 .710 .710 .710 .710 .710 .730 .740 .630 .630 .630 (18.0) (18.0) (18.0) (18.0) (18.0) (18.0) (18.0) (18.0) (18.0) (18.5) (18.8) (16.0) (16.0) (16.0) J Max .880 .940 .940 1.000 1.000 1.320 1.320 1.370 1.370 1.470 1.510 1.570 1.640 1.710 (22.4) (23.9) (23.9) (25.4) (25.4) (33.5) (33.5) (34.8) (34.8) (37.3) (38.4) (39.9) (41.7) (43.4) APPLICATION NOTES 1. Assembly identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Cable entry is defined as the accomodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Metric dimensions (mm) are in parentheses. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-6 E-Mail: sales@glenair.com MIL-DTL-83723 M83723/59-1, M83723/60-1, MS27292 and MS27294 Threaded Protective Plug and ReceptacleCovers Attachment Style C = 5.0" (127.0) Chain P = 8.0" (203.2) Chain R = 5.0" (127.0) Rope T = 8.0" (203.2) Rope N = No Attachment MATING CONNECTOR MIL-DTL-83723, Series III Threaded Basic Part Number M83723/59-1 = Plug Cover M83723/60-1 = Receptacle Cover Superseded Part Number Basic Part Number MS27292 = Plug Cover MS27294 = Receptacle Cover Shell Size M83723/59-1 Dash Number 10 A C Finish A = Black Anodize R = Electroless Nickel W = Cadmium over Electroless Nickel MS27292 - 1 See Note 3 .757 (19.2) .618 (15.7) Max Gasket Gasket .125 (3.2) Max Dia. F .125 (3.2) Max Dia. F Length Length E Thread M83723/59-1 PLUG COVER M27292 PLUG COVER (SEE NOTE 3) E Thread M83723/60-1 RECEPTACLE COVER M27294 RECEPTACLE COVER (SEE NOTE 3) TABLE I: Shell Size, Dash Number, Thread and Dimensions Shell Size 8 10 12 14 16 18 20 22 24 M27292 M27294 Dash No. 7 1 2 3 4 5 8 6 9 (c) 2013 Glenair, Inc. E Thread Class 2A/2B 9/16- 24 UNEF 11/16- 24 UNEF 7/8- 20 UNEF 15/16- 20 UNEF 1 1/16- 18 UNEF 1 3/16- 18 UNEF 1 5/16- 18 UNEF 1 7/16- 18 UNEF 1 9/16- 18 UNEF APPLICATION NOTES K Dia Max 1. Assembly identified with manufacturer's name and part number, space permitting. .776 (19.7) .906 (23.0) 1.078 (27.4) 1.141 (29.0) 1.266 (32.2) 1.375 (34.9) 1.510 (38.4) 1.625 (41.3) 1.760 (44.7) 2. For complete dimensions, see the applicable Military Specification. 3. MS27292 and MS27294 have a black anodize finish. Dash numbers 1, 2 and 7 have a 3.0-inch (76.2) wire rope attachment. Other dash numbers have a 5-inch (127.0) wire rope attachent. 4. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-7 E-Mail: sales@glenair.com E MIL-DTL-83723 M83723/59-2, M83723/60-2, MS27293 and MS29295 Protective Plug and ReceptacleCovers Bayonet Coupling Attachment Style C = 5.0" (127.0) Chain P = 8.0" (203.2) Chain R = 5.0" (127.0) Rope T = 8.0" (203.2) Rope N = No Attachment MATING CONNECTOR MIL-DTL-83723 Bayonet Basic Part Number M83723/59-2 = Plug Cover M83723/60-2 = Receptacle Cover Superseded Part Number Basic Part Number MS27293 = Plug Cover MS27295 = Receptacle Cover Shell Size M83723/59-2 Dash Number 10 A C Finish A = Black Anodize R = Electroless Nickel W = Cadmium over Electroless Nickel MS27293 - 1 See Note 3 .757 (19.2) Max E Gasket .125 (3.2) Max Dia. F Length M83723/59-2 PLUG COVER M27293 PLUG COVER (SEE NOTE 3) TABLE I: Shell Size, Dash Number and Dimensions Shell Size 8 10 12 14 16 18 20 22 24 (c) 2013 Glenair, Inc. M27292 M27294 Dash No. 7 1 2 3 4 5 8 6 9 F Dia Max .776 (19.7) .906 (23.0) 1.078 (27.4) 1.141 (29.0) 1.266 (32.2) 1.375 (34.9) 1.510 (38.4) 1.625 (41.3) 1.760 (44.7) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-8 E-Mail: sales@glenair.com MIL-DTL-83723 M83723/70 Series III Quick-Disconnect Receptacle Adapter Basic Part Number M83723/70 Dash No. W 22 Material and Finish A = Aluminum, Black Anodize R = Aluminum, Electroless Nickel G = Corrosion-Resistant Steel Passivate W = Aluminum, Cadmium Olive Drab over Electroless Nickel .320 (8.1) .065 (1.7) .040 (1.0) .065 (1.7) .060 (1.5) .010 (0.3) X 45 B .035 (0.9) D F C 20 A Thread .025 (0.6) Min Width Coupled Indicator Line Color Coded Blue .292 (7.4) .288 (7.3) 30 .410 (10.4) E Radius .442 (11.2) APPLICATION NOTES 1. 2. 3. 4. (c) 2013 Glenair, Inc. Dimensions are in inches and apply after plating. Metric equivalents are in parentheses and given for information only. Unless otherwise specified, tolerances shall be .005 (0.13) for three decimal places, .01 (0.25) for two decimal places and 1/2 for all angles. Coupling indicator line shall be color coded blue and .025 .010 (0.64 0.25) wide. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-9 E-Mail: sales@glenair.com E MIL-DTL-83723 M83723/70 Straight Adapter TABLE I: Shell Size, Thread, Teeth and Dimensions Shell Size 8 10 12 14 16 18 E 20 22 24 (c) 2013 Glenair, Inc. A Coupling Thread UNEF-2B B Dia C Dia D Dia E Radius F Dia .5625-24 .607 (15.42) .603 (15.32) .579 (14.71) .575 (14.61) .689 (17.50) .685 (17.40) .036 (0.91) .031 (0.79) .525 (13.34) .6875-24 .732 (18.59) .728 (18.49) .714 (18.14) .710 (18.03) .814 (20.68) .810 (20.57) .036 (0.91) .031 (0.79) .650 (16.51) .875-20 .918 (23.34) .915 (23.24) .894 (22.71) 1.001 (25.43) .890 (22.61) .997 (25.32) .036 (0.91) .031 (0.79) .840 (21.34) .9375-20 .982 (24.94) .978 (24.84) .954 (24.23) 1.064 (27.03) .950 (24.13) 1.060 (26.92) .036 (0.91) .031 (0.79) .900 (22.86) 1.0625-18 1.107 (28.12) 1.079 (27.41) 1.189 (30.20) 1.103 (28.02) 1.075 (27.31) 1.185 (30.10) .036 (0.91) 1.025 (26.04) .031 (0.79) 1.1875-18 1.232 (31.29) 1.204 (30.58) 1.330 (33.78) 1.228 (31.19) 1.200 (30.48) 1.326 (33.68) .044 (1.12) 1.150 (29.21) .039 (0.99) 1.3125-18 1.357 (34.47) 1.329 (33.76) 1.455 (36.96) 1.353 (34.37) 1.325 (33.66) 1.451 (36.86) .044 (1.12) 1.275 (32.39) .039 (0.99) 1.4375-18 1.482 (37.64) 1.454 (36.93) 1.580 (40.13) 1.478 (37.54) 1.450 (36.83) 1.576 (40.03) .044 (1.12) 1.400 (35.56) .039 (0.99) 1.5625-18 1.607 (40.82) 1.579 (40.11) 1.705 (43.31) 1.603 (40.72) 1.575 (40.01) 1.701 (43.21) .044 (1.12) 1.525 (38.74) .039 (0.99) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-10 E-Mail: sales@glenair.com AS81511 AS81511 Qualified Backshells and Connector Accessories SECTION F * AS81511 QUALIFIED PRODUCTS * SECTION F Industry Specification Number Part Identification Number Military Part Number Superseded Glenair Commercial Part Number AS81511/13 M81511/13 -- 620JS001 AS81511/14 -- AS81511/17 AS81511/18 AS81511/19 AS81511/20 AS81511/29 M81511/14 A M81511/14 B M81511/14 C M81511/14 D M81511/17 M81511/18 M81511/19 M81511/20 M81511/29 -- -- -- 390JS012 390JS012 380JS008 380JS008 660-017 660-018 650JS002 Consult Factory 660-016 AS81511/30 M81511/30 -- 650JS001 AS81511/14 -- -- Glenair Connector Designator/ Interface "J" AS81511 Series I, II, III & IV "J" AS81511 Series I, II, III & IV "J" AS81511 Series I, II, III & IV Description Straight Non-Self-Locking Strain Relief Straight EMI/RFI Environmental Backshell A Straight EMI/RFI Environmental Backshell B Str. EMI/RFI Non-Environmental Backshell C Str. EMI/RFI Non-Environmental Backshell D Protective Plug Cover Protective Receptacle Cover Dummy Storage Receptacle Jam Nut Protective Plug Cover Dummy Storage Receptacle Bayonet Coupling Page No. F-2 F-3 F-5 AS81511 Series I, II, III & IV F-7 AS81511 Series I, II, III & IV AS81511 Series I, II, III & IV AS81511 Series I, II, III & IV MIL-DTL-26500 and MIL-DTL-83723, Series III F-8 F-9 F-7 F-10 F (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com F-1 E-Mail: sales@glenair.com AS81511 AS81511/13 Straight Non-Self-Locking Strain Relief CONNECTOR DESIGNATOR: J AS81511 Series I, II, III & IV Basic Part Number Shell Size M81511/13 16 A1 Adapter Connector Class Designator A1 = Classes E, H, and P B1 = Classes A, B, C, F, G, and T E A Thread Cable Entry F F TABLE I: Shell Size, Cable Entry and Backshell Dimensions Shell Size 08 10 14 16 18 20 22 24 A Thread Class 2B .500 - 28 UNEF .625 - 28 UN .875 - 28 UN 1.000 - 28 UN 1.125 - 28 UN 1.250 - 28 UN 1.375 - 28 UN 1.500 - 28 UN E Max 1.375 (34.9) 1.375 (34.9) 1.375 (34.9) 1.375 (34.9) 1.375 (34.9) 1.452 (36.9) 1.452 (36.9) 1.452 (36.9) F Max .775 (19.7) .955 (24.3) 1.145 (29.1) 1.210 (30.7) 1.330 (33.8) 1.470 (37.3) 1.580 (40.1) 1.720 (43.7) .062 .125 .250 .375 .500 .625 .750 .750 Min Cable Entry (1.6) (3.2) (6.4) (9.5) (12.7) (15.9) (19.1) (19.1) Max .125 (3.2) .250 (6.4) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) APPLICATION NOTES 1. Assembly to be identified with manufacturer's name and part number, space permitting. 2. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 3. For complete dimensions, see the applicable Military Specification. 4. Metric dimensions (mm) are in parentheses. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com F-2 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: J Basic Part Number AS81511 Series I, II, III & IV AS81511 AS81511/14 Straight EMI/RFI Environmental Backshell A & B Dash Number (Table I) M81511/14 - 050 TABLE I: Dash Number and Dimensions Dash No. Shell Size Function A Thread Class 2B Length Ref. Cable Range Min Max 001 08 A .500 - 28 UNEF 2.22 (56.4) .062 (1.6) .125 002 08 A .500 - 28 UNEF 2.22 (56.4) .125 (3.2) .250 (6.4) 003 08 B .500 - 28 UNEF 2.72 (69.1) .062 (1.6) .125 (3.2) 004 08 B .500 - 28 UNEF 2.72 (69.1) .125 (3.2) .250 (6.4) 005 08 A .500 - 28 UNEF 2.72 (69.1) .062 (1.6) .125 (3.2) 006 08 A .500 - 28 UNEF 2.72 (69.1) .125 (3.2) .250 (6.4) 007 08 B .500 - 28 UNEF 3.22 (81.8) .062 (1.6) .125 (3.2) 008 08 B .500 - 28 UNEF 3.22 (81.8) .125 (3.2) .250 (6.4) 009 10 A .625 - 28 UN 2.22 (56.4) .125 (3.2) .250 (6.4) 010 10 A .625 - 28 UN 2.22 (56.4) .250 (6.4) .375 (9.5) 011 10 A .625 - 28 UN 2.22 (56.4) .375 (9.5) .500 (12.7) 012 10 B .625 - 28 UN 2.72 (69.1) .125 (3.2) .250 (6.4) 013 10 B .625 - 28 UN 2.72 (69.1) .250 (6.4) .375 (9.5) 014 10 B .625 - 28 UN 2.72 (69.1) .375 (9.5) .500 (12.7) 015 10 A .625 - 28 UN 2.72 (69.1) .125 (3.2) .250 (6.4) 016 10 A .625 - 28 UN 2.72 (69.1) .250 (6.4) .375 (9.5) 017 10 A .625 - 28 UN 2.72 (69.1) .375 (9.5) .500 (12.7) 018 10 B .625 - 28 UN 3.22 (81.8) .125 (3.2) .250 (6.4) 019 10 B .625 - 28 UN 3.22 (81.8) .250 (6.4) .375 (9.5) 020 10 B .625 - 28 UN 3.22 (81.8) .375 (9.5) .500 (12.7) 021 14 A .875 - 28 UN 2.22 (56.4) .250 (6.4) .375 022 14 A .875 - 28 UN 2.22 (56.4) .375 (9.5) .500 (12.7) 023 14 A .875 - 28 UN 2.22 (56.4) .500 (12.7) .625 (15.9) 024 14 B .875 - 28 UN 2.72 (69.1) .250 (6.4) .375 025 14 B .875 - 28 UN 2.72 (69.1) .375 (9.5) .500 (12.7) 026 14 B .875 - 28 UN 2.72 (69.1) .500 (12.7) .625 (15.9) 027 14 A .875 - 28 UN 2.72 (69.1) .250 (6.4) .375 028 14 A .875 - 28 UN 2.72 (69.1) .375 (9.5) .500 (12.7) 029 14 A .875 - 28 UN 2.72 (69.1) .500 (12.7) .625 (15.9) 030 14 B .875 - 28 UN 3.22 (81.8) .250 (6.4) .375 031 14 B .875 - 28 UN 3.22 (81.8) .375 (9.5) .500 (12.7) 032 14 B .875 - 28 UN 3.22 (81.8) .500 (12.7) .625 (15.9) 033 16 A 1.000 - 28 UN 2.22 (56.4) .250 (6.4) .375 034 16 A 1.000 - 28 UN 2.22 (56.4) .375 (9.5) .500 (12.7) 035 16 A 1.000 - 28 UN 2.22 (56.4) .500 (12.7) .625 (15.9) 036 16 B 1.000 - 28 UN 2.72 (69.1) .250 (6.4) .375 (9.5) 037 16 B 1.000 - 28 UN 2.72 (69.1) .375 (9.5) .500 (12.7) (3.2) F (9.5) (9.5) Function "B" Adapter Assembly (9.5) APPLICATION NOTES (9.5) (9.5) Table I Continued on Page F-4 (c) 2013 Glenair, Inc. Function "A" Adapter Assembly 1. 2. 3. 4. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. For functions C and D see page F-5. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com F-3 E-Mail: sales@glenair.com AS81511 AS81511/14 Straight EMI/RFI Environmental Backshell A & B TABLE I: Dash Number and Dimensions (Continued from Page F-3) F Dash No. Shell Size Function A Thread Class 2B 038 16 B 1.000 - 28 UN 1.056 (26.8) 2.72 (69.1) .500 (12.7) 039 16 A 1.000 - 28 UN 1.056 (26.8) 2.72 (69.1) .250 (6.4) .375 (9.5) 040 16 A 1.000 - 28 UN 1.056 (26.8) 2.72 (69.1) .375 (9.5) .500 (12.7) 041 16 A 1.000 - 28 UN 1.056 (26.8) 2.72 (69.1) .500 (12.7) .625 (15.9) 042 16 B 1.000 - 28 UN 1.056 (26.8) 3.22 (81.8) .250 (6.4) .375 (9.5) 043 16 B 1.000 - 28 UN 1.056 (26.8) 3.22 (81.8) .375 (9.5) .500 (12.7) 044 16 B 1.000 - 28 UN 1.056 (26.8) 3.22 (81.8) .500 (12.7) .625 (15.9) 045 18 A 1.125 - 28 UN 1.180 (30.0) 2.22 (56.4) .375 (9.5) .500 (12.7) 046 18 A 1.125 - 28 UN 1.180 (30.0) 2.22 (56.4) .500 (12.7) .625 (15.9) 047 18 A 1.125 - 28 UN 1.180 (30.0) 2.22 (56.4) .625 (15.9) .750 (19.1) 048 18 B 1.125 - 28 UN 1.180 (30.0) 2.72 (69.1) .375 (9.5) .500 (12.7) 049 18 B 1.125 - 28 UN 1.180 (30.0) 2.72 (69.1) .500 (12.7) .625 (15.9) 050 18 B 1.125 - 28 UN 1.180 (30.0) 2.72 (69.1) .625 (15.9) .750 (19.1) 051 18 A 1.125 - 28 UN 1.180 (30.0) 2.72 (69.1) .375 (9.5) .500 (12.7) 052 18 A 1.125 - 28 UN 1.180 (30.0) 2.72 (69.1) .500 (12.7) .625 (15.9) 053 18 A 1.125 - 28 UN 1.180 (30.0) 2.72 (69.1) .625 (15.9) .750 (19.1) 054 18 B 1.125 - 28 UN 1.180 (30.0) 3.22 (81.8) .375 (9.5) .500 (12.7) 055 18 B 1.125 - 28 UN 1.180 (30.0) 3.22 (81.8) .500 (12.7) .625 (15.9) 056 18 B 1.125 - 28 UN 1.180 (30.0) 3.22 (81.8) .625 (15.9) .750 (19.1) 113 20 A 1.250 - 28 UN 1.305 (33.1) 2.30 (58.4) .500 (12.7) .625 (15.9) 114 20 A 1.250 - 28 UN 1.305 (33.1) 2.30 (58.4) .625 (15.9) .750 (19.1) 115 20 A 1.250 - 28 UN 1.305 (33.1) 2.30 (58.4) .750 (19.1) .875 (22.2) 116 20 B 1.250 - 28 UN 1.305 (33.1) 2.80 (71.1) .500 (12.7) .625 (15.9) 117 20 B 1.250 - 28 UN 1.305 (33.1) 2.80 (71.1) .625 (15.9) .750 (19.1) 118 20 B 1.250 - 28 UN 1.305 (33.1) 2.80 (71.1) .750 (19.1) .875 (22.2) 119 20 A 1.250 - 28 UN 1.305 (33.1) 2.80 (71.1) .500 (12.7) .625 (15.9) 120 20 A 1.250 - 28 UN 1.305 (33.1) 2.80 (71.1) .625 (15.9) .750 (19.1) 121 20 A 1.250 - 28 UN 1.305 (33.1) 2.80 (71.1) .750 (19.1) .875 (22.2) 122 20 B 1.250 - 28 UN 1.305 (33.1) 3.30 (83.8) .500 (12.7) .625 (15.9) 123 20 B 1.250 - 28 UN 1.305 (33.1) 3.30 (83.8) .625 (15.9) .750 (19.1) 124 20 B 1.250 - 28 UN 1.305 (33.1) 3.30 (83.8) .750 (19.1) .875 (22.2) 125 22 A 1.375 - 28 UN 1.430 (36.3) 2.30 (58.4) .625 (15.9) .750 (19.1) 126 22 A 1.375 - 28 UN 1.430 (36.3) 2.30 (58.4) .750 (19.1) .875 (22.2) 127 22 A 1.375 - 28 UN 1.430 (36.3) 2.30 (58.4) .875 (22.2) 1.000 (25.4) 128 22 B 1.375 - 28 UN 1.430 (36.3) 2.80 (71.1) .625 (15.9) .750 (19.1) 129 22 B 1.375 - 28 UN 1.430 (36.3) 2.80 (71.1) .750 (19.1) .875 (22.2) 130 22 B 1.375 - 28 UN 1.430 (36.3) 2.80 (71.1) .875 (22.2) 1.000 (25.4) 131 22 A 1.375 - 28 UN 1.430 (36.3) 2.80 (71.1) .625 (15.9) .750 (19.1) 132 22 A 1.375 - 28 UN 1.430 (36.3) 2.80 (71.1) .750 (19.1) .875 (22.2) 133 22 A 1.375 - 28 UN 1.430 (36.3) 2.80 (71.1) .875 (22.2) 1.000 (25.4) 134 22 B 1.375 - 28 UN 1.430 (36.3) 3.30 (83.8) .625 (15.9) .750 (19.1) 135 22 B 1.375 - 28 UN 1.430 (36.3) 3.30 (83.8) .750 (19.1) .875 (22.2) 136 22 B 1.375 - 28 UN 1.430 (36.3) 3.30 (83.8) .875 (22.2) 1.000 (25.4) 137 24 A 1.500 - 28 UN 1.555 (39.5) 2.30 (58.4) .750 (19.1) .875 (22.2) 138 24 A 1.500 - 28 UN 1.555 (39.5) 2.30 (58.4) .875 (22.2) 1.000 (25.4) 139 24 A 1.500 - 28 UN 1.555 (39.5) 2.30 (58.4) 1.000 (25.4) 1.125 (28.6) 140 24 B 1.500 - 28 UN 1.555 (39.5) 2.80 (71.1) .750 (19.1) .875 (22.2) 141 24 B 1.500 - 28 UN 1.555 (39.5) 2.80 (71.1) .875 (22.2) 1.000 (25.4) 142 24 B 1.500 - 28 UN 1.555 (39.5) 2.80 (71.1) 1.000 (25.4) 1.125 (28.6) 143 24 A 1.500 - 28 UN 1.555 (39.5) 2.80 (71.1) .750 (19.1) .875 (22.2) 144 24 A 1.500 - 28 UN 1.555 (39.5) 2.80 (71.1) .875 (22.2) 1.000 (25.4) 145 24 A 1.500 - 28 UN 1.555 (39.5) 2.80 (71.1) 1.000 (25.4) 1.125 (28.6) 146 24 B 1.500 - 28 UN 1.555 (39.5) 3.30 (83.8) .750 (19.1) .875 (22.2) 147 24 B 1.500 - 28 UN 1.555 (39.5) 3.30 (83.8) .875 (22.2) 1.000 (25.4) 24 B 1.500 - 28 UN 1.555 (39.5) 3.30 (83.8) 1.000 (25.4) 1.125 (28.6) 148 (c) 2013 Glenair, Inc. C Dia Max Length Ref. Cable Range Min Max .625 (15.9) Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com F-4 E-Mail: sales@glenair.com CONNECTOR DESIGNATOR: J AS81511 AS81511/14 Functions C and D Straight EMI/RFI Non-Environmental Backshell Basic Part Number Dash Number (Table I) M81511/14 100 AS81511 Series I, II, III & IV Function "D" Adapter Assembly Function "C" Adapter Assembly TABLE I: Dash Number and Dimensions TABLE I: Dash Number and Dimensions (Continued) Dash No. Shell Size Function A Thread Class 2B C Dia Max Length Ref. Cable Range Min Max Dash No. Shell Size Function A Thread Class 2B C Dia Max 057 08 C .500 - 28 UNEF .555 (14.1) 1.71 (43.4) 062 (1.6) 058 08 C .500 - 28 UNEF .555 (14.1) 1.71 (43.4) .125 (3.2) 059 08 D .500 - 28 UNEF .555 (14.1) 2.47 (62.7) .062 (1.6) 060 08 D .500 - 28 UNEF .555 (14.1) 2.47 (62.7) .125 061 08 C .500 - 28 UNEF .555 (14.1) 2.21 (56.1) 062 08 C .500 - 28 UNEF .555 (14.1) 063 08 D .500 - 28 UNEF 064 08 D 065 10 066 .125 (3.2) 089 16 C 1.000 - 28 UN 1.056 (26.8) 1.71 (43.4) .250 (6.4) .375 (9.5) .250 (6.4) 090 16 C 1.000 - 28 UN 1.056 (26.8) 1.71 (43.4) .375 (9.5) .500 (12.7) .125 (3.2) 091 16 C 1.000 - 28 UN 1.056 (26.8) 1.71 (43.4) .500 (12.7) .625 (15.9) (3.2) .250 (6.4) 092 16 D 1.000 - 28 UN 1.056 (26.8) 2.47 (62.7) .250 (6.4) .375 (9.5) .062 (1.6) .125 (3.2) 093 16 D 1.000 - 28 UN 1.056 (26.8) 2.47 (62.7) .375 (9.5) .500 (12.7) 2.21 (56.1) .125 (3.2) .250 (6.4) 094 16 D 1.000 - 28 UN 1.056 (26.8) 2.47 (62.7) .500 (12.7) .625 (15.9) .555 (14.1) 2.97 (75.4) .062 (1.6) .125 (3.2) 095 16 C 1.000 - 28 UN 1.056 (26.8) 2.21 (56.1) .250 (6.4) .375 (9.5) .500 - 28 UNEF .555 (14.1) 2.97 (75.4) .125 (3.2) .250 (6.4) 096 16 C 1.000 - 28 UN 1.056 (26.8) 2.21 (56.1) .375 (9.5) .500 (12.7) C .625 - 28 UN .680 (17.3) 1.71 (43.4) .125 (3.2) .250 (6.4) 097 16 C 1.000 - 28 UN 1.056 (26.8) 2.21 (56.1) .500 (12.7) .625 (15.9) 10 C .625 - 28 UN .680 (17.3) 1.71 (43.4) .250 (6.4) .375 (9.5) 098 16 D 1.000 - 28 UN 1.056 (26.8) 2.97 (75.4) .250 (6.4) .375 (9.5) 067 10 C .625 - 28 UN .680 (17.3) 1.71 (43.4) .375 (9.5) .500 (12.7) 099 16 D 1.000 - 28 UN 1.056 (26.8) 2.97 (75.4) .375 (9.5) .500 (12.7) 068 10 D .625 - 28 UN .680 (17.3) 2.47 (62.7) .125 (3.2) .250 (6.4) 100 16 D 1.000 - 28 UN 1.056 (26.8) 2.97 (75.4) .500 (12.7) .625 (15.9) 069 10 D .625 - 28 UN .680 (17.3) 2.47 (62.7) .250 (6.4) .375 (9.5) 101 18 C 1.125 - 28 UN 1.180 (30.0) 1.71 (43.4) .375 (9.5) .500 (12.7) 070 10 D .625 - 28 UN .680 (17.3) 2.47 (62.7) .375 (9.5) .500 (12.7) 102 18 C 1.125 - 28 UN 1.180 (30.0) 1.71 (43.4) .500 (12.7) .625 (15.9) 071 10 C .625 - 28 UN .680 (17.3) 2.21 (56.1) .125 (3.2) .250 (6.4) 103 18 C 1.125 - 28 UN 1.180 (30.0) 1.71 (43.4) .625 (15.9) .750 (19.1) 072 10 C .625 - 28 UN .680 (17.3) 2.21 (56.1) .250 (6.4) .375 (9.5) 104 18 D 1.125 - 28 UN 1.180 (30.0) 2.47 (62.7) .375 (9.5) .500 (12.7) 073 10 C .625 - 28 UN .680 (17.3) 2.21 (56.1) .375 (9.5) .500 (12.7) 105 18 D 1.125 - 28 UN 1.180 (30.0) 2.47 (62.7) .500 (12.7) .625 (15.9) 074 10 D .625 - 28 UN .680 (17.3) 2.97 (75.4) .125 (3.2) .250 (6.4) 106 18 D 1.125 - 28 UN 1.180 (30.0) 2.47 (62.7) .625 (15.9) .750 (19.1) 075 10 D .625 - 28 UN .680 (17.3) 2.97 (75.4) .250 (6.4) .375 (9.5) 107 18 C 1.125 - 28 UN 1.180 (30.0) 2.21 (56.1) .375 (9.5) .500 (12.7) 076 10 D .625 - 28 UN .680 (17.3) 2.97 (75.4) .375 (9.5) .500 (12.7) 108 18 C 1.125 - 28 UN 1.180 (30.0) 2.21 (56.1) .500 (12.7) .625 (15.9) 077 14 C .875 - 28 UN .930 (23.6) 1.71 (43.4) .250 (6.4) .375 (9.5) 109 18 C 1.125 - 28 UN 1.180 (30.0) 2.21 (56.1) .625 (15.9) .750 (19.1) 078 14 C .875 - 28 UN .930 (23.6) 1.71 (43.4) .375 (9.5) .500 (12.7) 110 18 D 1.125 - 28 UN 1.180 (30.0) 2.97 (75.4) .375 (9.5) .500 (12.7) 079 14 C .875 - 28 UN .930 (23.6) 1.71 (43.4) .500 (12.7) .625 (15.9) 111 18 D 1.125 - 28 UN 1.180 (30.0) 2.97 (75.4) .500 (12.7) .625 (15.9) 080 14 D .875 - 28 UN .930 (23.6) 2.47 (62.7) .250 (6.4) .375 (9.5) 112 18 D 1.125 - 28 UN 1.180 (30.0) 2.97 (75.4) .625 (15.9) .750 (19.1) 081 14 D .875 - 28 UN .930 (23.6) 2.47 (62.7) .375 (9.5) .500 (12.7) 149 20 C 1.250 - 28 UN 1.305 (33.1) 1.78 (45.2) .500 (12.7) .625 (15.9) 082 14 D .875 - 28 UN .930 (23.6) 2.47 (62.7) .500 (12.7) .625 (15.9) 150 20 C 1.250 - 28 UN 1.305 (33.1) 1.78 (45.2) .625 (15.9) .750 (19.1) 083 14 C .875 - 28 UN .930 (23.6) 2.21 (56.1) .250 (6.4) .375 (9.5) 151 20 C 1.250 - 28 UN 1.305 (33.1) 1.78 (45.2) .750 (19.1) .875 (22.2) 084 14 C .875 - 28 UN .930 (23.6) 2.21 (56.1) .375 (9.5) .500 (12.7) 152 20 D 1.250 - 28 UN 1.305 (33.1) 2.55 (64.8) .500 (12.7) .625 (15.9) 085 14 C .875 - 28 UN .930 (23.6) 2.21 (56.1) .500 (12.7) .625 (15.9) 153 20 D 1.250 - 28 UN 1.305 (33.1) 2.55 (64.8) .625 (15.9) .750 (19.1) 086 14 D .875 - 28 UN .930 (23.6) 2.97 (75.4) .250 (6.4) .375 (9.5) 154 20 D 1.250 - 28 UN 1.305 (33.1) 2.55 (64.8) .750 (19.1) .875 (22.2) 087 14 D .875 - 28 UN .930 (23.6) 2.97 (75.4) .375 (9.5) .500 (12.7) 155 20 C 1.250 - 28 UN 1.305 (33.1) 2.28 (57.9) .500 (12.7) .625 (15.9) 088 14 D .875 - 28 UN .930 (23.6) 2.97 (75.4) .500 (12.7) .625 (15.9) 156 20 C 1.250 - 28 UN 1.305 (33.1) 2.28 (57.9) .625 (15.9) .750 (19.1) Table I Continued on Next Column (Right) (c) 2013 Glenair, Inc. Length Ref. Cable Range Min Max Table I Continued on Page F-6 Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com F-5 E-Mail: sales@glenair.com F AS81511 AS81511/14 Functions C and D Straight EMI/RFI Non-Environmental Backshell TABLE I: Dash Number and Dimensions (Continued from Page F-5) F Dash No. Shell Size Function A Thread Class 2B C Dia Max Length Ref. Cable Range Min Max 157 20 C 1.250 - 28 UN 1.305 (33.1) 2.28 (57.9) .750 (19.1) .875 (22.2) 158 20 D 1.250 - 28 UN 1.305 (33.1) 3.05 (77.5) .500 (12.7) .625 (15.9) 159 20 D 1.250 - 28 UN 1.305 (33.1) 3.05 (77.5) .625 (15.9) .750 (19.1) 160 20 D 1.250 - 28 UN 1.305 (33.1) 3.05 (77.5) .750 (19.1) .875 (22.2) 161 22 C 1.375 - 28 UN 1.430 (36.3) 1.78 (45.2) .625 (15.9) .750 (19.1) 162 22 C 1.375 - 28 UN 1.430 (36.3) 1.78 (45.2) .750 (19.1) .875 (22.2) 163 22 C 1.375 - 28 UN 1.430 (36.3) 1.78 (45.2) .875 (22.2) 1.000 (25.4) 164 22 D 1.375 - 28 UN 1.430 (36.3) 2.55 (64.8) .625 (15.9) .750 (19.1) 165 22 D 1.375 - 28 UN 1.430 (36.3) 2.55 (64.8) .750 (19.1) .875 (22.2) 166 22 D 1.375 - 28 UN 1.430 (36.3) 2.55 (64.8) .875 (22.2) 1.000 (25.4) 167 22 C 1.375 - 28 UN 1.430 (36.3) 2.28 (57.9) .625 (15.9) .750 (19.1) 168 22 C 1.375 - 28 UN 1.430 (36.3) 2.28 (57.9) .750 (19.1) .875 (22.2) 169 22 C 1.375 - 28 UN 1.430 (36.3) 2.28 (57.9) .875 (22.2) 1.000 (25.4) 170 22 D 1.375 - 28 UN 1.430 (36.3) 3.05 (77.5) .625 (15.9) .750 (19.1) 171 22 D 1.375 - 28 UN 1.430 (36.3) 3.05 (77.5) .750 (19.1) .875 (22.2) 172 22 D 1.375 - 28 UN 1.430 (36.3) 3.05 (77.5) .875 (22.2) 1.000 (25.4) 173 24 C 1.500 - 28 UN 1.555 (39.5) 1.78 (45.2) .750 (19.1) .875 (22.2) 174 24 C 1.500 - 28 UN 1.555 (39.5) 1.78 (45.2) .875 (22.2) 1.000 (25.4) 175 24 C 1.500 - 28 UN 1.555 (39.5) 1.78 (45.2) 1.000 (25.4) 1.125 (28.6) 176 24 D 1.500 - 28 UN 1.555 (39.5) 2.55 (64.8) .750 (19.1) .875 (22.2) 177 24 D 1.500 - 28 UN 1.555 (39.5) 2.55 (64.8) .875 (22.2) 1.000 (25.4) 178 24 D 1.500 - 28 UN 1.555 (39.5) 2.55 (64.8) 1.000 (25.4) 1.125 (28.6) 179 24 C 1.500 - 28 UN 1.555 (39.5) 2.28 (57.9) .750 (19.1) .875 (22.2) 180 24 C 1.500 - 28 UN 1.555 (39.5) 2.28 (57.9) .875 (22.2) 1.000 (25.4) 181 24 C 1.500 - 28 UN 1.555 (39.5) 2.28 (57.9) 1.000 (25.4) 1.125 (28.6) 182 24 D 1.500 - 28 UN 1.555 (39.5) 3.05 (77.5) .750 (19.1) .875 (22.2) 183 24 D 1.500 - 28 UN 1.555 (39.5) 3.05 (77.5) .875 (22.2) 1.000 (25.4) 184 24 D 1.500 - 28 UN 1.555 (39.5) 3.05 (77.5) 1.000 (25.4) 1.125 (28.6) 171 22 D 1.375 - 28 UN 1.430 (36.3) 3.05 (77.5) .750 (19.1) .875 (22.2) 172 22 D 1.375 - 28 UN 1.430 (36.3) 3.05 (77.5) .875 (22.2) 1.000 (25.4) 173 24 C 1.500 - 28 UN 1.555 (39.5) 1.78 (45.2) .750 (19.1) .875 (22.2) 174 24 C 1.500 - 28 UN 1.555 (39.5) 1.78 (45.2) .875 (22.2) 1.000 (25.4) 175 24 C 1.500 - 28 UN 1.555 (39.5) 1.78 (45.2) 1.000 (25.4) 1.125 (28.6) 176 24 D 1.500 - 28 UN 1.555 (39.5) 2.55 (64.8) .750 (19.1) .875 (22.2) 177 24 D 1.500 - 28 UN 1.555 (39.5) 2.55 (64.8) .875 (22.2) 1.000 (25.4) 178 24 D 1.500 - 28 UN 1.555 (39.5) 2.55 (64.8) 1.000 (25.4) 1.125 (28.6) 179 24 C 1.500 - 28 UN 1.555 (39.5) 2.28 (57.9) .750 (19.1) .875 (22.2) 180 24 C 1.500 - 28 UN 1.555 (39.5) 2.28 (57.9) .875 (22.2) 1.000 (25.4) 181 24 C 1.500 - 28 UN 1.555 (39.5) 2.28 (57.9) 1.000 (25.4) 1.125 (28.6) 182 24 D 1.500 - 28 UN 1.555 (39.5) 3.05 (77.5) .750 (19.1) .875 (22.2) 183 24 D 1.500 - 28 UN 1.555 (39.5) 3.05 (77.5) .875 (22.2) 1.000 (25.4) 184 24 D 1.500 - 28 UN 1.555 (39.5) 3.05 (77.5) 1.000 (25.4) 1.125 (28.6) APPLICATION NOTES 1. 2. 3. 4. (c) 2013 Glenair, Inc. For complete dimensions see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Cable Range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. For functions A and B see page F-3. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com F-6 E-Mail: sales@glenair.com MATING CONNECTOR AS81511 AS81511/17, AS81511/18 and AS81511/29 Protective Plug and ReceptacleCovers Basic Part Number M81511/17 = Plug Cover Series 2 M81511/18 = Receptacle Cover Series 1and 2 M81511/29 = Plug Cover Series 1 AS81511 M81511/17 - 16 Shell Size .885 (22.5) Max H Gasket Gasket F Dia .161/156 (4.1/4.0) G Dia .161/156 (4.1/4.0) K J J M81511/18 Receptacle Cover Series 1 and 2 M81511/29 Plug Cover - Series 1 M81511/17 Plug Cover - Series 2 TABLE I: Shell Size, Attachment and Dimensions Shell Size F Dia Max 08 10 14 16 18 20* 22* 24* .845 ( 21.5) .970 ( 24.6) 1.220 (31.0) 1.345 (34.2) 1.470 (37.3) 1.595 (40.5) 1.720 (43.7) 1.845 (46.9) G Dia +.000(0.0) -.006(0.2) .553 (14.0) .678 (17.2) .928 (23.6) 1.054 (26.8) 1.178 (29.9) 1.303 (33.1) 1.428 (36.3) 1.553 (39.4) H Max M81511/29 M81511/17 1.125 (28.6) 1.125 (28.6) 1.125 (28.6) 1.125 (28.6) 1.125 (28.6) 1.125 (28.6) 1.125 (28.6) 1.125 (28.6) .985 (25.0) .985 (25.0) .985 (25.0) .985 (25.0) .985 (25.0) - - - J One Link K Dia Max 3.0 ( 76.2) 3.0 ( 76.2) 3.5 ( 88.9) 3.5 ( 88.9) 3.5 ( 88.9) 3.5 ( 88.9) 3.5 ( 88.9) 3.5 ( 88.9) .844 ( 21.4) .969 ( 24.6) 1.219 (31.0) 1.345 (34.2) 1.469 (37.3) 1.594 (40.5) 1.719 (43.7) 1.844 (46.8) F * Not Applicable for M81511/17 or M81511/18 APPLICATION NOTES (c) 2013 Glenair, Inc. 1. Assembly identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. Rev. 8.29.14 Mil-Spec Backshells U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com F-7 E-Mail: sales@glenair.com AS81511 AS81511/19 Dummy Stowage Receptacle Bayonet Coupling MATING CONNECTOR Finish: 1 = Cadmium Olive Drab 2 = Dull Chromium over Nickel Basic Part No. AS81511 Series 2 M81511/19 - 14 1 Shell Size F J K O-Ring E G H F OE Shell Size .003 (.1) 08 .550 (14.0) 10 .675 (17.1) 14 .925 (23.5) 16 1.051 (26.7) 18 1.175 (29.8) TABLE I: Dash Number, Cable Entry and Backshell Dimensions F Sq. .008 (.2) .812 (20.6) .937 (23.8) 1.125 (28.6) 1.250 (31.8) 1.343 (34.1) G Sq. .005 (.1) .594 (15.1) .719 (18.3) .906 (23.0) .969 (24.6) 1.062 (27.0) .005 .121 .121 .121 .121 .121 H (0.1) (3.1) (3.1) (3.1) (3.1) (3.1) .010 .645 .645 .645 .645 .645 J (.3) (16.4) (16.4) (16.4) (16.4) (16.4) .005 .070 .070 .070 .070 .070 K (.1) (1.8) (1.8) (1.8) (1.8) (1.8) APPLICATION NOTES (c) 2013 Glenair, Inc. 1. Assembly to be identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com F-8 E-Mail: sales@glenair.com AS81511 AS81511/30 Dummy Stowage Receptacle Bayonet Coupling MATING CONNECTOR Finish: 1 = Cadmium Olive Drab 2 = Dull Chromium over Nickel Basic Part No. AS81511 Series 1 M81511/30 - 14 1 Shell Size F J K O-Ring E G H F OE Shell Size .003 (.1) 08 .550 (14.0) 10 .675 (17.1) 14 .925 (23.5) 16 1.051 (26.7) 18 1.175 (29.8) 20 1.300 (33.0) 22 1.425 (36.2) 24 1.550 (39.4) TABLE I: Dash Number, Cable Entry and Backshell Dimensions F Sq. .008 (.2) .812 (20.6) .937 (23.8) 1.125 (28.6) 1.250 (31.8) 1.343 (34.1) 1.467 (37.3) 1.562 (39.7) 1.703 (43.3) G Sq. .005 (.1) .594 (15.1) .719 (18.3) .906 (23.0) .969 (24.6) 1.062 (27.0) 1.156 (29.4) 1.250 (31.8) 1.375 (34.9) .005 .121 .121 .121 .121 .121 .121 .121 .148 H (0.1) (3.1) (3.1) (3.1) (3.1) (3.1) (3.1) (3.1) (3.8) .010 .645 .645 .645 .645 .645 .645 .645 .645 J (.3) (16.4) (16.4) (16.4) (16.4) (16.4) (16.4) (16.4) (16.4) .005 .070 .070 .070 .070 .070 .070 .070 .070 K (.1) (1.8) (1.8) (1.8) (1.8) (1.8) (1.8) (1.8) (1.8) APPLICATION NOTES (c) 2013 Glenair, Inc. 1. Assembly to be identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com F-10 E-Mail: sales@glenair.com Misc. Backshells and Accessories Miscellaneous Qualified Backshells and Connector Accessories Industry Specification Number AS25042 AS25043 MS17349 MS17350 Part Identification Number MS25042 MS25043 MS17349 MS17350 Military Part Number Superseded MS25042 MS25043 -- Glenair Commercial Part Number 660-004 660-005 660-007 660-006 Description Threaded Protective Plug Cover Threaded Protective Receptacle Cover Threaded Protective Receptacle Cover Threaded Protective Plug Cover MS27291 MS27291 -- 620ES050 Straight Non-Self-Locking Strain Relief MIL-DTL-26500 MS27558 -- G2221-A 90 Non-Self-Locking Strain Relief MIL-DTL-26500 MS27559 -- G2221-B 90 Non-Self-Locking Strain Relief -- MS27741 -- 410-003 AS50151 -- MS3105 MS3115 MS3180 MS3181 -- -- 650BS001 650DS001 660-008 660-009 TAG Ring for Reliable Terminations Dummy Storage Receptacle, Threaded Coupling Dummy Storage Receptacle, Bayonet Coupling Protective Plug Cover, Bayonet Coupling Protectiove Receptacle Cover, Bayonet Coupling -- -- (R) -- MS27512 MS3186 Consult Factory Jam Nut with Safety Wire Holes -- -- MIL-DTL-83513/05 MIL-DTL-83538/9 M29504/04 M29504/05 M83513/05 -- -- -- Consult Factory Consult Factory Consult Factory Fiber Optic Pin Terminus, Size 16 Fiber Optic Socket Terminus, Size 16 Micro-D Jackscrew Kits M83538/9S M81824/1 -- -- Consult Factory 070-001 Straight Adapter and Extender In-Line Splice, Insulated and Environmental MIL-S-81824/1 Glenair Connector Designator/ Interface Page No. AS50151 G-2 MIL-DTL-22992 G-3 "E" MIL-DTL-26500 "E" MIL-DTL-26500 "E" MIL-DTL-26500 -- AS50151 MIL-DTL-26482 G-6 MIL-DTL-26482 G-10 G-4 G-5 G-7 G-8 G-9 AS50151; MIL-DTL-26482; MIL-DTL-26500; MIL-DTL-83723 Series I; MIL-DTL-83723, Series III MIL-DTL-38999 Series I; MIL-DTL38999 Series II; MIL-DTL-28840; MIL-DTL-27599 MIL-DTL-29504 MIL-DTL-29504 MIL-DTL-83513/05 G-13 G-14 G-15 MIL-DTL-83538/4 -- G-16 G-17 G-11 G (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells and Accessories U.S. CAGE Code 06324 Rev 8-19-14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com G-1 E-Mail: sales@glenair.com Misc. Backshells and Accessories AS25042 and AS25043 Protective Plug and ReceptacleCovers Basic Part Number MS25042 = Plug Cover MS25043 = Receptacle Cover MATING CONNECTOR AS50151 Finish D = Cadmium, O.D. DA = Black Anodize Shell Size (Table I) MS25042 - 20 D J G E Thread Attachment L Dia Gasket Attachment M Dia F H K K E Thread MS25042 Plug Cover MS25043 Receptacle Cover TABLE I: Shell Size, Thread, Attachment and Dimensions G Shell Size 8 10 12 14 16 18 20 22 24 28 32 36 40 44 48 E Thread 1/2- 28 UNEF 5/8- 24 UNEF 3/4- 20 UNEF 7/8- 20 UNEF 1- 20 UNEF 1 1/8- 18 UNEF 1 1/4- 18 UNEF 1 3/8- 18 UNEF 1 1/2- 18 UNEF 1 3/4- 18 UNS 2- 18 UNS 2 1/4- 16 UN 2 1/2- 16 UN 2 3/4- 16 UN 3- 16 UN F Dia Max .562 (14.3) .687 (17.4) .812 (20.6) .937 (23.8) 1.062 (27.0) 1.187 (30.1) 1.312 (33.3) 1.437 (36.5) 1.562 (39.7) 1.812 (46.0) 2.062 (52.4) 2.312 (58.7) 2.562 (65.1) 2.812 (71.4) 3.062 (77.8) G Max .656 (16.7) .656 (16.7) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) H Max .688 (17.5) .815 (20.7) 1.000 (25.4) 1.125 (28.6) 1.188 (30.2) 1.344 (34.1) 1.469 (37.3) 1.594 (40.5) 1.719 (43.7) 1.969 (50.0) 2.219 (56.4) 2.469 (62.7) 2.719 (69.1) 2.969 (75.4) 3.188 (81.0) J K Attachment Max Length (Inches) .469 (11.9) 4.00 (101.6) .469 (11.9) 4.00 ( 101.6) .469 (11.9) 4.50 ( 114.3) .469 (11.9) 4.50 ( 114.3) .469 (11.9) 4.50 ( 114.3) .469 (11.9) 4.50 ( 114.3) .469 (11.9) 5.00 (127.0) .469 (11.9) 5.00 (127.0) .469 (11.9) 5.50 (139.7) .531 (13.5) 7.75 (196.9) .531 (13.5) 7.75 (196.9) .531 (13.5) 7.75 (196.9) .531 (13.5) 7.75 (196.9) .531 (13.5) 7.75 (196.9) .531 (13.5) 7.75 (196.9) L Dia Min .151 (3.8) .151 (3.8) .151 (3.8) .151 (3.8) .151 (3.8) .151 (3.8) .182 (4.6) .182 (4.6) .182 (4.6) .182 (4.6) .213 (5.4) .213 (5.4) .213 (5.4) .213 (5.4) .213 (5.4) M Dia Min .135 (3.4) .135 (3.4) .135 (3.4) .135 (3.4) .135 (3.4) .135 (3.4) .135 (3.4) .135 (3.4) .166 (4.2) .166 (4.2) .182 (4.6) .182 (4.6) .182 (4.6) .182 (4.6) .182 (4.6) APPLICATION NOTES (c) 2013 Glenair, Inc. 1. Assembly identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com G-2 E-Mail: sales@glenair.com Misc. Backshells and Accessories MS17349 and MS17350 Protective Receptacle and Plug Covers MATING CONNECTOR Basic Part Number MS17349 = Receptacle Cover MS17350 = Plug Cover MIL-DTL-22992 Dash No. (Table I) MS17349 C Attachment Type A = MS17349 Only 28 A Finish C = Conductive N = Non-Condictive E Thread H Gasket Attachment (Type B) M Dia 1.500 (38.1) Max Attachment M Dia MIL-C-22992 L G J J E Thread MS17349 Receptacle Cover MS17349 Attachment Type A MS17350 Plug Cover TABLE I: Dash Number, Thread, Attachment and Dimensions Dash No. 12 14 16 18 20 22 24 28 32 36 40 44 E Thread .8750-0.1P-0.2L-DS 1.0000-0.1P-0.2L-DS 1.1250-0.1P-0.2L-DS 1.2500-0.1P-0.2L-DS 1.3750-0.1P-0.2L-DS 1.5000-0.1P-0.2L-DS 1.7500-0.1P-0.2L-DS 2.0000-0.1P-0.2L-DS 2.2500-0.1P-0.2L-DS 2.5000-0.1P-0.2L-DS 2.7500-0.1P-0.2L-DS 3.0000-0.1P-0.2L-DS G Max 1.094 (27.8) 1.219 (31.0) 1.344 (34.1) 1.469 (37.3) 1.562 (39.7) 1.688 (42.9) 1.938 (49.2) 2.219 (56.4) 2.469 (62.7) 2.719 (69.1) 2.969 (75.4) 3.219(81.8) H J Chain Max Length (Inches) .765 (19.4) 5.00 (127.0) .765 (19.4) 5.00 (127.0) .980 (24.9) 5.00 (127.0) .980 (24.9) 5.00 (127.0) .980 (24.9) 5.00 (127.0) .980 (24.9) 6.00 (152.4) .980 (24.9) 6.00 (152.4) .980 (24.9) 6.00 (152.4) .980 (24.9) 6.00 (152.4) .980 (24.9) 6.00 (152.4) .980 (24.9) 6.00 (152.4) .980 (24.9) 6.00 (152.4) L Min 1.016 (25.8) 1.141 (29.0) 1.266 (32.2) 1.391 (35.3) 1.516 (38.5) 1.641 (41.7) 1.891 (48.0) 2.141 (54.4) 2.391 (60.7) 2.641 (67.1) 2.891 (73.4) 3.141 (79.8) M Dia Min .150 (3.8) .150 (3.8) .150 (3.8) .177 (4.5) .177 (4.5) .177 (4.5) .177 (4.5) .177 (4.5) .199 (5.1) .199 (5.1) .199 (5.1) .199 (5.1) APPLICATION NOTES (c) 2013 Glenair, Inc. 1. Assembly identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells and Accessories U.S. CAGE Code 06324 Rev. 04.04.18 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com G-3 E-Mail: sales@glenair.com G Misc. Backshells and Accessories MS27291 Straight Non-Self-Locking Strain Relief CONNECTOR DESIGNATOR: E Dash Number Basic Part Number MIL-DTL-26500 MS27291 - 401 E A Thread C G G F TABLE I: Dash Number, Shell Size, Thread and Dimensions G Dash No. For Use with Class Connectors R and F G 1 101 2 201 3 301 4 401 5 501 6 601 13 701 14 801 15 901 Shell Size Ref. A Thread Class 2B C Max 10 12 14 16 18 22 8 20 24 .562 - 24 UNEF .750 - 20 UNEF .812 - 20 UNEF .938 - 20 UNEF 1.062 - 18 UNEF 1.312 - 18 UNEF .438 - 28 UNEF 1.188 - 18 UNEF 1.438 - 18 UNEF .731 .919 .981 1.106 1.231 1.481 .606 1.356 1.606 (18.6) (23.3) (24.9) (28.1) (31.3) (37.6) (15.4) (34.4) (40.8) E .015 .935 .935 1.170 1.170 1.170 1.170 .935 1.170 1.170 (.4) (23.7) (23.7) (29.7) (29.7) (29.7) (29.7) (23.7) (29.7) (29.7) F Max .914 1.026 1.090 1.250 1.358 1.604 .789 1.481 1.729 (23.2) (26.1) (27.7) (31.8) (34.5) (40.7) (20.0) (37.6) (43.9) OG .005 .270 .400 .460 .610 .690 .940 .186 .816 1.066 (.1) (6.9) (10.2) (11.7) (15.5) (17.5) (23.9) (4.7) (20.7) (27.1) APPLICATION NOTES 1. 2. 3. 4. (c) 2013 Glenair, Inc. Finish: Class R and F-anodize, Class G, Chrome Plated Assembly to be identified with manufacturer's name and part number, space permitting. For complete dimensions, see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com G-4 E-Mail: sales@glenair.com Misc. Backshells and Accessories MS27558 90 Non-Self-Locking Strain Relief CONNECTOR DESIGNATOR: E Basic Part Number MIL-DTL-26500 Dash Number MS27558 - 3 E A Thread Wire Holes (3 Equally Spaced) Set Screw C F G H TABLE I: Dash Number, Shell Size, Thread and Dimensions Dash Shell Size No. Ref. 1* 8 2 10 3 12 4 14 5 16 6 18 7 20 8 22 9 24 * Consult Factory A Thread Class 2B .437 - 28 UNEF .562 - 24 UNEF .750 - 20 UNEF .812 - 20 UNEF .938 - 20 UNEF 1.062 - 18 UNEF 1.188 - 18 UNEF 1.312 - 18 UNEF 1.438 - 18 UNEF C Max .672 (17.1) .797 (20.2) 1.016 (25.8) 1.110 (28.2) 1.234 (31.3) 1.360 (34.5) 1.485 (37.7) 1.610 (40.9) 1.735 (44.1) E Max 1.200 (30.5) 1.320 (33.5) 1.320 (33.5) 1.487 (37.8) 1.470 (37.3) 1.588 (40.3) 1.759 (44.7) 1.759 (44.7) 2.027 (51.5) F Max .602 (15.3) .650 (16.5) .740 (18.8) .775 (19.7) .830 (21.1) .897 (22.8) .955 (24.3) 1.015 (25.8) 1.077 (27.4) G Max .892 (22.7) 1.072 (27.2) 1.072 (27.2) 1.108 (28.1) 1.108 (28.1) 1.233 (31.3) 1.477 (37.5) 1.477 (37.5) 1.727 (43.9) .240 .365 .365 .515 .515 .640 .775 .775 1.060 H Dia (6.1) (9.3) (9.3) (13.1) (13.1) (16.3) (19.7) (19.7) (26.9) APPLICATION NOTES 1. 2. 3. 4. (c) 2013 Glenair, Inc. Finish: Anodize. Assembly to be identified with manufacturer's name and part number, space permitting. For complete dimensions, see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com G-5 E-Mail: sales@glenair.com G Misc. Backshells and Accessories MS27559 90 Non-Self-Locking Strain Relief CONNECTOR DESIGNATOR: E Dash Number Basic Part Number MIL-DTL-26500 MS27559 - 4 E A Thread Wire Holes (3 Equally Spaced) Set Screw C F G H TABLE I: Dash Number, Shell Size, Thread and Dimensions G Dash No. 1 2 3 4 5 6 7 8 9 Shell Size Ref. 8 10 12 14 16 18 20 22 24 A Thread Class 2B .437 - 28 UNEF .562 - 24 UNEF .750 - 20 UNEF .812 - 20 UNEF .938 - 20 UNEF 1.062 - 18 UNEF 1.188 - 18 UNEF 1.312 - 18 UNEF 1.438 - 18 UNEF C Max .672 (17.1) .797 (20.2) 1.016 (25.8) 1.110 (28.2) 1.234 (31.3) 1.360 (34.5) 1.485 (37.7) 1.610 (40.9) 1.735 (44.1) E Max 1.173 (29.8) 1.293 (32.8) 1.293 (32.8) 1.460 (37.1) 1.443 (36.7) 1.561 (39.6) 1.732 (44.0) 1.732 (44.0) 2.000 (50.8) F Max .602 (15.3) .650 (16.5) .740 (18.8) .775 (19.7) .830 (21.1) .897 (22.8) .955 (24.3) 1.015 (25.8) (27.4) 1.077 G Max .892 (22.7) 1.072 (27.2) 1.072 (27.2) 1.108 (28.1) 1.108 (28.1) 1.233 (31.3) 1.477 (37.5) 1.477 (37.5) 1.727 (43.9) .201 .320 .320 .452 .508 .571 .748 .748 .996 H Dia (5.1) (8.1) (8.1) (11.5) (12.9) (14.5) (19.0) (19.0) (25.3) APPLICATION NOTES 1. 2. 3. 4. (c) 2013 Glenair, Inc. Finish: Anodize. Assembly to be identified with manufacturer's name and part number, space permitting. For complete dimensions, see the applicable Military Specification. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com G-6 E-Mail: sales@glenair.com Misc. Backshells and Accessories MS27741 TAG(R) Ring For Reliable Shield Terminations Basic Part Number MS27741 Dash Number - 10 TABLE I: Shell Size, Entry, Slots and Weight Dash No. 2 3 4 5 6 7 8 9 10 11 (c) 2013 Glenair, Inc. A Dia Max .545 .670 .795 .920 1.045 1.170 1.295 1.420 1.687 1.812 (13.8) (17.0) (20.2) (23.4) (26.5) (29.7) (32.9) (36.1) (42.8) (46.0) Entry Dia No. of Slots Weight in Grams .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 3 4 6 8 10 10 12 15 15 15 2.268 2.722 3.175 4.082 4.536 4.990 5.443 6.350 10.433 14.515 APPLICATION NOTES 1. For complete dimensions see the applicable Military Specification. 2. Finish: Body and Nut - Gold Iridite Spring - Gold Plate 3. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 G Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com G-7 E-Mail: sales@glenair.com Misc. Backshells and Accessories AS31051 Dummy Stowage Receptacle Threaded Coupling Basic Part No. MATING CONNECTOR Dash No. AS50151 MS3105 - 16 E H K F J Thread G Dia. G E Shell Size .005 (.1) 8S .594 (15.1) 10S .719 (18.3) 12S .812 (20.6) 12 .812 (20.6) 14S .906 (23.0) 14 .906 (23.0) 16S .969 (24.6) 16 .969 (24.6) 18 1.062 (27.0) 20 1.156 (29.4) 22 1.250 (31.8) 24 1.375 (34.9) 28 1.562 (39.7) 32 1.750 (44.5) 36 1.938 (49.2) 40 2.188 (55.6) 44 2.375 (60.3) 48 2.625 (66.7) TABLE I: Dash Number, Cable Entry and Backshell Dimensions F Max .906 1.031 1.125 1.125 1.219 1.219 1.312 1.312 1.406 1.531 1.656 1.781 2.031 2.281 2.531 2.781 3.031 3.281 (23.0) (26.2) (28.6) (28.6) (31.0) (31.0) (33.3) (33.3) (35.7) (38.9) (42.1) (45.2) (51.6) (57.9) (64.3) (70.6) (77.0) (83.3) G Max .130 .130 .130 .130 .130 .130 .130 .130 .130 .130 .130 .157 .157 .183 .183 .183 .183 .183 H Max (3.3) (3.3) (3.3) (3.3) (3.3) (3.3) (3.3) (3.3) (3.3) (3.3) (3.3) (4.0) (4.0) (4.6) (4.6) (4.6) (4.6) (4.6) .593 .593 .593 .781 .593 .781 .593 .781 .781 .781 .781 .843 .843 .906 .906 .906 .906 .906 (15.1) (15.1) (15.1) (19.8) (15.1) (19.8) (15.1) (19.8) (19.8) (19.8) (19.8) (21.4) (21.4) (23.0) (23.0) (23.0) (23.0) (23.0) J Thread Class 2A 1/2-28 UNEF 5/8-24 UNEF 3/4-20 UNEF 3/4-20 UNEF 7/8-20 UNEF 7/8-20 UNEF 1-20 UNEF 1-20 UNEF 1 1/8-18 UNEF 1 1/4-18 UNEF 1 3/8-18 UNEF 1 1/2-18 UNEF 1 3/4-18 UNS 2-18 UNS 2 1/4-16 UN 2 1/2-16 UN 2 3/4-16 UN 3-16 UN K Max .156 .156 .156 .156 .156 .156 .156 .156 .203 .203 .203 .203 .203 .359 .359 .359 .359 .359 (4.0) (4.0) (4.0) (4.0) (4.0) (4.0) (4.0) (4.0) (5.2) (5.2) (5.2) (5.2) (5.2) (9.1) (9.1) (9.1) (9.1) (9.1) APPLICATION NOTES 1. Assembly to be identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Metric dimensions (mm) are in parentheses. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells and Accessories U.S. CAGE Code 06324 Rev 8-19-14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com G-8 E-Mail: sales@glenair.com Misc. Backshells and Accessories MS3115 Dummy Stowage Receptacle Bayonet Coupling MATING CONNECTOR Material and Finish A = Hard Anodize L = Electroless Nickel W = Cadmium Olive Drab over Electroless Nickel MIL-DTL-26482 Basic Part No. MS3115 - 16 L Dash No. (Table II) K J F Gasket E G H E Shell Size .003 (.1) 8 .471 (12.0) 10 .588 (14.9) 12 .748 (19.0) 14 .873 (22.2) 16 .998 (25.3) 18 1.123 (28.5) 20 1.248 (31.7) 22 1.373 (34.9) 24 1.498 (38.0) TABLE I: Dash Number, Cable Entry and Backshell Dimensions F Max .828 .954 1.047 1.141 1.234 1.328 1.453 1.578 1.703 (21.0) (24.2) (26.6) (29.0) (31.3) (33.7) (36.9) (40.1) (43.3) G Dim .594 .719 812 .906 .969 1.062 1.156 1.250 1.375 (15.1) (18.3) (20.6) (23.0) (24.6) (27.0) (29.4) (31.8) (34.9) OH .005 (0.1) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .147 (3.7) .016 .478 .478 .478 .478 .478 .478 .572 .572 .605 J (.4) (12.1) (12.1) (12.1) (12.1) (12.1) (12.1) (14.5) (14.5) (15.4) .016 .062 .062 .062 .062 .062 .062 .094 .094 .094 K (.4) (1.6) (1.6) (1.6) (1.6) (1.6) (1.6) (2.4) (2.4) (2.4) APPLICATION NOTES 1. Assembly to be identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Metric dimensions (mm) are in parentheses. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells and Accessories U.S. CAGE Code 06324 Rev. 12.23.15 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com G-9 E-Mail: sales@glenair.com G Misc. Backshells and Accessories MS3180 and MS3181 Protective Plug and Receptacle Covers MATING CONNECTOR MIL-DTL-26482 Prior Revision D Available: Finish is Cadmium Olive Drab MS3180 - 12 Attachment Option (Omit for None) C = Chain N = Chain with Ring (MS3181 Only) MS3180 - 12 Basic Part Number MS3180 = Plug Cover MS3181 = Receptacle Cover Length L = Chain or Rope Length of 5 Inches (127.0 mm). Omit for Standard (See K in Table I) Attachment Option C = Chain N = Chain with Ring (MS3181 Only) R = Wire Rope Basic Part Number MS3180 = Plug Cover MS3181 = Receptacle Cover C C Shell Size (Table I) A L Finish A = Anodize Shell Size NOTE: prior revision parts will NOT carry the "JAN" marking J F Gasket .167 (4.2) Dia G Gasket .167 (4.2) Dia L H K K MS3180 Plug Cover MS3181 Optional Ring Attachment MS3181 Receptacle Cover TABLE I: Shell Size, Dimensions and Attachment Shell Size 8 10 12 14 16 18 20 22 24 G F Max .562 ( 14.3) .562 ( 14.3) .562 ( 14.3) .562 ( 14.3) .562 ( 14.3) .562 ( 14.3) .625 ( 15.9) .625 ( 15.9) .658 ( 16.7) G Dia Max .719 ( 18.3) .844 ( 21.4) 1.000 ( 25.4) 1.125 ( 28.6) 1.250 ( 31.8) 1.375 ( 34.9) 1.500 ( 38.1) 1.625 ( 41.3) 1.750 ( 44.5) H Dia Max .734 (18.6) .859 (21.8) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) J Max .562 (14.3) .562 (14.3) .562 (14.3) .562 (14.3) .562 (14.3) .562 (14.3) .562 (14.3) .562 (14.3) .602 (15.3) K Standard Length (Inches) 3.00 (76.2) 3.00 (76.2) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 4.00 ( 101.6) 4.00 ( 101.6) 4.00 ( 101.6) L Min .578 (14.7) .703 (17.9) .891 (22.6) 1.016 (25.8) 1.141 (29.0) 1.266 (32.2) 1.391 (35.3) 1.516 (38.5) 1.641 (41.7) APPLICATION NOTES (c) 2013 Glenair, Inc. 1. Assembly identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells and Accessories U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com G-10 E-Mail: sales@glenair.com Misc. Backshells and Accessories MS3186 Jam Nut with Safety Wire Holes B Material E Basic Part Number Safety Wire Holes (3 Equally Spaced) A Thread .045 (1.1) Min C D - Number of Slots A = Aluminim S = Steel C = CRES MS3186 Dash No. A - 113 B Finish A = Black Anodize (Material `A' only) B = Black Cadmium over Corrosion Resistant Steel (Material `C' only) C = Clear Cadmium (Material `A' only) E = Electrodeposited Nickel N = Electroless Nickel (Space Use Only) P = Passivated (Material `C' only) T = Tin Plate (Material `S' only) W = 1,000 Hour Cadmium Olive Drab over Electroless Nickel TABLE I: Reference for Connector Shell Size Dash No. 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 AS50151 MILDTL-26482 MIL-DTL26500 MIL-DTL83723 I MIL-DTL83723 III MIL-DTL38999 I MIL-DTL38999 II MILDTL-28840 MILDTL-27599 8S -10S, 10SL ---12S, 12 -14S, 14 -16S, 16 -18 --20 22 --24 -28 --32 -36 40 44 48 -8 ---10 --12 -14 -16 --18 20 --22 24 ---------- ---8 --10 --12 14 16 --18 -20 -22 -24 ---------- -8 ---10 --12 -14 -16 --18 20 --22 24 ---------- ----8 -10 --12 14 16 Bay 16 Thd --18 20 --22 24 ---------- -----9 -11 --13 -15 --17 19 --21 23 25 --------- --------8 -10 -12 --14 16 --18 20 22 24 -------- --------11 -13 --15 -17 -19 --23 25 -29 -33 ----- -----9 -11 8 -10, 13 -12, 15 -14, 17 -16, 19 --18, 21 20, 23 22, 25 24 -------- (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells and Accessories U.S. CAGE Code 06324 Rev. 11.17.15 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com G-11 E-Mail: sales@glenair.com G Misc. Backshells and Accessories MS3186 Jam Nut with Safety Wire Holes TABLE I: Reference for Connector Shell Size Dash No. A Thread 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 .500 -28 UNEF-2B .5625 - 24 UNEF-2B .625 - 24 UNEF-2B .625 - 20 UN-2B .625 - 20 UN-2B .6875 - 24 UNEF-2B .750 - 20 UNEF-2B .8125 - 20 UNEF-2B .875 - 20 UNEF-2B .9375 - 20 UNEF-2B 1.000 - 20 UNEF-2B 1.125 - 20 UN-2B 1.125 - 18 UNEF-2B 1.1875 - 18 UNEF-2B 1.250 - 20 UN-2B 1.250 - 18 UNEF-2B 1.375 - 18 UNEF-2B 1.4375 - 18 UNEF-2B 1.500 - 20 UN-2B 1.500 - 18 UNEF-2B 1.625 - 18 UNEF-2B 1.750 - 18 UNS-2B 1.875 - 16 UN-2B 1.9375 - 16 UN-2B 2.000 - 18 UNS-2B 2.125 - 16 UN-2B 2.250 - 16 UN-2B 2.500 - 16 UN-2B 2.750 - 16 UN-2B 3.000 - 16 UN-2B B OE .017 (.4) C Max D Min. No. of Slots .017 (.4) .687 .750 .812 .812 .812 .875 .937 1.000 1.062 1.123 1.188 1.312 1.312 1.375 1.438 1.438 1.562 1.625 1.688 1.688 1.812 2.000 2.125 2.187 2.250 2.375 2.500 2.750 3.000 3.250 (17.4) (19.1) (20.6) (20.6) (20.6) (22.2) (23.8) (25.4) (27.0) (28.5) (30.2) (33.3) (33.3) (34.9) (36.5) (36.5) (39.7) (41.3) (42.9) (42.9) (46.0) (50.8) (54.0) (55.5) (57.2) (60.3) (63.5) (69.9) (76.2) (82.6) None .135 (3.4) None .135 (3.4) None .135 (3.4) None .135 (3.4) .135 (3.4) None .135 (3.4) .135 (3.4) .135 (3.4) None None .135 (3.4) .192 (4.9) None None .192 (4.9) .192 (4.9) .192 (4.9) None None None None None None None None None 2 None 2 2 1 2 1 1 1 1 1 1 None None 1 1 None None 1 1 1 None None None None None None None None .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .189 .189 .189 .189 .189 .189 .189 (3.2) (3.2) (3.2) (3.2) (3.2) (3.2) (3.2) (3.2) (3.2) (3.2) (3.2) (3.2) (3.2) (3.2) (3.2) (3.2) (3.2) (3.2) (3.2) (3.2) (3.2) (3.2) (3.2) (4.8) (4.8) (4.8) (4.8) (4.8) (4.8) (4.8) APPLICATION NOTES G (c) 2013 Glenair, Inc. 1. Assembly identified with manufacturer's name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells and Accessories U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com G-12 E-Mail: sales@glenair.com Misc. Backshells and Accessories M29504/04 181-002 Size 16 MIL-DTL-38999 Series III Type Fiber Optic Pin Terminus D38999 Series III QPL Ultra low dB loss QPL'd pin terminus for MIL-DTL-38999 Series III Part Number Fiber Size Core/Cladding/Coating O A (Microns) 181-002-125 181-002-126S 181-002-126 181-002-127 181-002-142 181-002-144 181-002-145 181-002-156 181-002-157 181-002-173 181-002-175 181-002-231 181-002-236 181-002-286 181-002-448 181-002-533 9/125 (Singlemode) 9/125 (Singlemode) 50/125 & 62.5/125 50/125 & 62.5/125 100/140 100/140 100/140 62.5/125/155 (Polyimide) 62.5/125/155 (Polyimide) 100/140/172 (Polyimide) 100/140/172 (Polyimide) 200/230 200/233 200/280 400/440 486/500 Ref. M29504/04-XXXX 125.5 126.0 126.0 127.0 142.0 144.0 145.0 156.0 157.0 173.0 175.0 231.0 236.0 286.0 448.0 533.0 M29504/04-4208 M29504/04-4209 M29504/04-4210 M29504/04-4040 M29504/04-4043 N/A M29504/04-4044 M29504/04-4211 M29504/04-4212 M29504/04-4087 M29504/04-4213 N/A M29504/04-4214 M29504/04-4215 M29504/04-4216 N/A .783 (19.9) .300 (7.6) .262 (6.7) Min. O .062 (1.6) OA .031 (0.8) O .069 (1.8) O.130 Max Shrink Tube .080 (2.0) Max Dia Cable .500 (12.7) Material and Finish Ferrule: Zirconia Ceramic Terminus Assembly: Stainless Steel/Passivate Shrink Tube: Kynar Notes See Glenair assembly procedure GAP-015 for complete termination instructions. Recommended Insertion/Extraction tool: P/N M81969/14-03 or equivalent (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com G-13 E-Mail: sales@glenair.com G Misc. Backshells and Accessories M29504/05 181-001 Size 16 MIL-DTL-38999 Series III Type Fiber Optic Socket Terminus D38999 QPL Series III Ultra low dB loss QPL'd socket terminus for MIL-DTL-38999 Series III Part Number 181-001-125 181-001-126S 181-001-126 181-001-127 181-001-142 181-001-144 181-001-145 181-001-156 181-001-157 181-001-173 181-001-175 181-001-231 181-001-236 181-001-286 181-001-448 181-001-533 Protective Cover Alignment Sleeve .100 (2.5) OA Fiber Size O A (Microns) Core/Cladding/Coating (Microns) 9/125 (Singlemode) 9/125 (Singlemode) 50/125 & 62.5/125 50/125 & 62.5/125 100/140 100/140 100/140 62.5/125/155 (Polyimide) 62.5/125/155 (Polyimide) 100/140/172 (Polyimide) 100/140/172 (Polyimide) 200/230 200/233 200/280 400/440 486/500 1.132 (28.8) 125.5 126.0 126.0 127.0 142.0 144.0 145.0 156.0 157.0 173.0 175.0 231.0 236.0 286.0 448.0 533.0 M29504/05-4237 M29504/05-4238 M29504/05-4239 M29504/05-4046 M29504/05-4049 N/A M29504/05-4050 M29504/05-4240 M29504/05-4241 M29504/05-4088 M29504/05-4242 N/A M29504/05-4243 M29504/05-4244 M29504/05-4245 N/A 1.025 (26.0) .031 (0.8) .158 (4.0) Min Ref. M29504/05-XXXX .537 (13.6) O .130 (3.3) Max O .069 (1.8) O .062 (1.6) O .117 (3.0) Max .346 (8.8) G Shrink Tube .265 (6.7) Ceramic alignment sleeve supplied with terminus. Add K to the end of part number development to supply with optional stainless steel alignment sleeve e.g. 181-001-126K. Table II: Accessories Part Number .500 (12.7) Description 181-001-S Ceramic Alignment Sleeve 181-001-K Stainless Steel Alignment Sleeve 181-001-C Protective cover (c) 2013 Glenair, Inc. .080 (2.0) Max Dia. Cable Bottoming Surface Material and Finish Ferrule: Zirconia Ceramic Alignment Sleeve: Zirconia Ceramic or Stainless Steel/Passivate. Terminus Assembly: Stainless Steel/Passivate Spacer, Spring, and Cover: Stainless Steel/Passivate * Shrink Tube: Kynar Notes Alignment Sleeve & Protective Cover can also be ordered separately (Table II). See assembly procedure GAP-015 for complete termination instructions. Recommended Insertion/Extraction tool: P/N M81969/14-03 or equivalent Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com G-14 E-Mail: sales@glenair.com Misc. Backshells and Accessories MIL-DTL-83513/05 Micro-D Jackscrew Kits Order One Kit Per Connector. Jackpost kits contain two posts, two hex nuts and 2 lockwashers. Jackscrew kits contain 2 screws and 2 e-rings. Packaged one kit (two screws or posts) per bag. Mil Spec Hardware Kits feature 300 series stainless steel. MIL SPEC JACKSCREW KITS Configuration Connector Size, Thread Size Sizes 9 to 69 Contacts. Mil Spec Size A to G #2-56 UNC Jackpost Size100 Only Mil Spec Size H #4-40 UNC Sizes 9 to 69 Contacts. Mil Spec Size A to G #2-56 UNC-2A Hex Head Jackscrew Low Profile Size 100 Only Mil Spec Size H #4-40 UNC-2A Sizes 9 to 69 Contacts. Mil Spec Size A to G #2-56 UNC-2A Mil Spec Part Number Glenair Part Number Dimensions .190 / .185 (4.8 / 4.7) M83513/05-07 080-00-00-100 .086 (2.2)-56 UNC-2A .125 (3.2) HEX .086 (2.2)-56 UNC-2B .490 / .460 (12.4 / 11.7) .185/.175 (4.7 / 4.4) M83513/05-17 080-00-00-101 .112 (2.8)-40 UNC-2A .187 (4.7) HEX .112 (2.8)-40 UNC-2B .490 / .460 (12.4 / 11.7) .083 (2.11) DIA .062 (1.57) HEX M83513/05-02 #2-56 UNC 2A .090 (2.29) MIN PERFECT THD .125 (3.18) DIA 080-00-00-502 .258 (6.55) MAX .103 (2.62) MAX .140 (3.56) DIA .062 (1.57) HEX M83513/05-12 080-00-00-512 #4-40 UNC 2A .110 (2.79) MIN PERFECT THD .187 (4.75) DIA .292 (7.41) MAX .098 (2.49) .083 (2.11) DIA M83513/05-05 080-00-00-505 #2-56 UNC 2A .090 (2.29) MIN PERFECT THD .125 (3.18) DIA .258 (6.55) MAX .103 (2.62) MAX .140 (3.56) DIA Slot Head Jackscrew Low Profile Hex Head Jackscrew Extended Size 100 Only Mil Spec Size H #4-40 UNC-2A M83513/05-15 Sizes 9 to 69 Contacts. Mil Spec Size A to G #2-56 UNC-2A M83513/05-03 Size 100 Only Mil Spec Size H #4-40 UNC-2A Sizes 9 to 69 Contacts. Mil Spec Size A to G #2-56 UNC-2A #4-40 UNC 2A .110 (2.79) MIN PERFECT THD .187 (4.75) DIA 080-00-00-515 .292 (7.41) MAX .098 (2.49) .062 (1.57) HEX 080-00-00-503 .083 (2.11) DIA .156 (3.96) DIA MAX .258 (6.55) MAX .610 (15.49) MAX .062 (1.57) HEX M83513/05-13 080-00-00-513 .140 (3.56) DIA .200 (5.08) DIA MAX .083 (2.11) DIA 080-00-00-506 .156 (3.96) DIA MAX (c) 2013 Glenair, Inc. Size 100 Only Mil Spec Size H #4-40 UNC-2A M83513/05-16 080-00-00-516 #2-56 UNC 2A .090 (2.29) MIN PERFECT THD .258 (6.55) MAX .610 (15.49) MAX .140 (3.56) DIA Slot Head Jackscrew Extended #4-40 UNC 2A .110 (2.79) MIN PERFECT THD .292 (7.41) MAX .610 (15.49) MAX M83513/05-06 #2-56 UNC 2A .090 (2.29) MIN PERFECT THD .200 (5.08) DIA MAX #4-40 UNC 2A .110 (2.79) MIN PERFECT THD .292 (7.41) MAX .610 (15.49) MAX Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com G-15 E-Mail: sales@glenair.com G Misc. Backshells and Accessories M83538/9S Straight Adapter and Extender CONNECTOR DESIGNATOR: MIL-DTL-83538/4 Basic Part Number Shell Size M83538/9S - 09 G TABLE I: Shell Size, Thread, Teeth and Dimensions B Dia .005 (0.13) Shell Size "A" Accessory Thread 09 M12x1.0-6g 0.100R .332 (8.18) 12 11 M15x1.0-6g 0.100R .440 (11.18) 16 13 M18x1.0-6g 0.100R .559 (14.20) 20 15 M22x1.0-6g 0.100R .716 (18.19) 24 17 M25x1.0-6g 0.100R .834 (21.18) 28 19 M28x1.0-6g 0.100R .952 (24.18) 32 21 M31x1.0-6g 0.100R 1.070 (27.18) 36 23 M34x1.0-6g 0.100R 1.188 (30.18) 40 (c) 2013 Glenair, Inc. C Number of Teeth APPLICATION NOTES 1. 2. 3. For complete dimensions see the applicable Military Specification. Material is corrosion resistant steel. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com G-16 E-Mail: sales@glenair.com Misc. Backshells and Accessories M81824/1 * 070-001 MIL-Qualified Splice In-Line, Insulated, Environmental Product Series Size (Table I, Page G-18) M81824/1 - 1 1.10 .050 .950 Min OE See Note 1 C 2X D Inspection Window 2X OB .110 .080 G Wirestop 2X OA Mfg Code Location Optional Color Code (see note 1) APPLICATION NOTES 1. 2. 3. 4. For complete dimensions see the applicable Military Specification. One seal ring must be color coded per Table I. Splice to have matching circumferential color stripe. Metric dimensions (mm) are in parentheses. Material and Finish: Splice - Copper UNS C10100 ASTM F68 or ASTM B187. Finish - Tin plate per ASTM B 545, .00010 min thick over nickel per AMS-QQ-N-290. Sealing material - Thermally stabilized thermoplastic. Shrink Sleeve - transparent, heat shrinkable, cross-linked polyvinylidene fluoride per AMS-DTL-23053/8. (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com G-17 E-Mail: sales@glenair.com G Misc. Backshells and Accessories M81824/1 * 070-001 MIL-Qualified Splice In-Line, Insulated, Environmental Table I Size 01 02 03 Wire Range A Dia B Dia 20-26 AWG 16-20 AWG 12-16 AWG .050 (1.27) .045 (1.14) .069 (1.75) .064 (1.63) .102 (2.59) .097 (2.46) .080 (2.03) .075 (1.90) .106 (2.69) .101 (2.57) .153 (3.89) .147 (3.74) C D .510 (12.95) .245 (6.22) .490 (12.45) .225 (5.72) .585 (14.86) .280 (7.11) .565 (14.35) .260 (6.60) .585 (14.86) .280 (7.11) .565 (14.35) .260 (6.60) E Dia Min After (Free State) Recovery Ref Mil Ref Color Code (note 1) .085 (2.2) .025 (0.6) M81824/1-1 Red .110 (2.8) .025 (0.6) M81824/1-2 Blue .170 (4.3) .025 (0.6) M81824/1-3 Yellow ASSEMBLY INSTRUCTIONS Step A 1. F Strip wires per Table II. Ends must be cut cleanly and at right angles to the axial plane of the wire. The wire must not be deformed while making cuts. Center Conductor Jacket Step B 1. Slide Insulation Sleeve onto one of the wires Insulation Sleeve Step C 1. Insert one wire into barrel of crimp splice and crimp using crimp tool and dies listed in Table II. 2. Repeat for second wire. Insulation Sleeve Step D Wire 1 Crimp Splice Wire 2 1. Slide Insulation Sleeve over the splice until centered. 2. Apply heat using acceptable heat source for military equipment as qualified by the services for Class 2 splices. Sealing rings shall melt and insulation sleeve shall seal around crimp splice and wires. G Insulation Sleeve Table II Part No. (c) 2013 Glenair, Inc. Wire Range F 070-00101 20, 22, 24, 26 .24 070-00102 16, 18, 20 .28 070-00103 12, 14, 16 .28 Crimp Tool Data Crimp Tool: M22520/5-01 Crimp Dies: M22520/5-102, -103 OR Crimp Tool: M22520/10-01 Crimp Dies: M22520/10-103, -104 OR Crimp Tool: M22520/37-01 Crimp Dies: None Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com G-18 E-Mail: sales@glenair.com Assembly Tools Backshell-to-Connector Assembly Tools Industry Specification Number Part Identification Number Military Part Number Superseded Glenair Commercial Part Number -- -- -- TG37 Description Connector Wrench for MIL-DTL-26500 and MIL-DTL-83723 Series III -- MS3481 -- TG39 Connector Wrench for MIL-DTL-26482, Ser. I & II; MIL-DTL-83723, Ser. I & NAS 1599 -- -- -- TG47 -- -- -- TG48 -- -- -- TG52 -- -- -- TG60 -- -- -- TG83 Connector Wrench for MIL-DTL-22992, Classes C, J and R Connector Wrench for MIL-DTL-38999, Series II Connector Wrench for MIL-C-81511, Series II and IV Connector Wrench for MIL-DTL-27599 and MIL-DTL-38999, Series I Wrench for SJT Connectors (LN29729) -- -- -- TG90 -- -- -- 600B005 -- -- -- 600C005 -- -- -- 600D005 -- -- -- 600E005 -- -- -- 600F005 -- -- -- 600FF005 -- -- -- 600G005 -- -- -- 600H005 -- -- -- 600HH005 -- -- -- 600J005 Glenair Connector Designator/ Interface MIL-DTL-26500; MIL-DTL-83723 Series III MIL-DTL-26482 Series I & II; MIL-DTL-83723 Series I; NAS 1599 MIL-DTL-22992, Classes C, J and R MIL-DTL-38999 Series II MIL-C-81511 Series II & IV MIL-DTL-27599; MIL-DTL-38999 Series I LN29729 Connector Wrench For MIL-DTL-38999, Ser III MIL-DTL-38999 Series III Plug and Receptacle Holder for MIL-DTL-50155 Series MS3100 MIL-DTL-5015555 Series MS3100 Solder & Crimp Solder and Crimp; and MIL-DTL-83723, Series II MIL-DTL-83723 Series II Plug and Receptacle Holder for MIL-DTL-22992 MIL-DTL-22992 Classes C, J and R Classes C, J and R Plug and Receptacle Holder for MIL-DTL-26482 Series I & II; MIL-DTL-26482, Series I and II, MIL-DTL-83723 Series I; MIL-DTL-83723, Series I and NAS 1599 NAS 1599 Plug and Receptacle Holder for MIL-DTL-26500 MIL-DTL-26500; and MIL-DTL-83723 Series III MIL-DTL-83723 Series III Plug and Receptacle Holder for MIL-DTL-27599 MIL-DTL-27599; and MIL-DTL-38999 Series I MIL-DTL-38999 Series I Plug and Receptacle Holder for MIL-DTL-38999 Series II MIL-DTL-38999, Series II Plug and Recetacle Holder for MIL-DTL-28840 MIL-DTL-28840 Plug and Receptacle Holder for MIL-DTL-38999 Series III MIL-DTL-38999, Series III Plug and Receptacle Holder for MIL-DTL-38999 Series IV MIL-DTL-38999, Series IV Plug and Receptacle Holder for MIL-DTL-81511 MIL-DTL-81511, Series I, II, III and IV Series I, II, III & IV Page No. H-2 H-3 H-4 H-5 H-6 H-7 H-8 H-9 H-10 H-11 H-12 H-13 H-14 H-15 H-16 H-17 H-18 H-19 H (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com H-1 E-Mail: sales@glenair.com Assembly Tools TG37 Connector Wrench MIL-DTL-26500, MIL-DTL-83723 Series III TG37 - 20 Basic Part Number Shell Size A GLENAIR, INC. .75 (19.1) Approx. B .375 (9.5) Approx .75 (19.1) Approx. C TABLE I: Dash Number and Dimensions H Polarization N - Normal 6, 7, 8, 9 or 10 (See Note 3) 5.625 (142.9) Approx. A Dash No. 8 10 12 14 16 18 20 22 24 N A Dim .062(1.6) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) (c) 2013 Glenair, Inc. B Dia Ref .424 (10.8) .526 (13.4) .696 (17.7) .765 (19.4) .892 (22.7) .998 (25.3) 1.123 (28.5) 1.248 (31.7) 1.373 (34.9) APPLICATION NOTES C Dia Ref .428 (10.9) .530 (13.5) .700 (17.8) .769 (19.5) .896 (22.8) 1.002 (25.5) 1.127 (28.6) 1.252 (31.8) 1.377 (35.0) 1. Metric dimensions (mm) are indicated in parentheses. 2. Material: Aluminum alloy with electroless nickel finish. 3. Polarization 10 not available for shell size 8. 4. Wrench has been designed to be used with both threaded and bayonet style connectors. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com H-2 E-Mail: sales@glenair.com Assembly Tools TG39 Connector Wrench MIL-DTL26482 Series I and II, MIL-DTL-83723 Series I and NAS 1599 TG39 - 20 Basic Part Number Dash Number 5.625 (142.9) Approx. A A GLENAIR, INC. .375 (9.5) Approx B TABLE I: Shell Size and Dimensions Shell Size 8 10 12 14 16 18 20 22 24 (c) 2013 Glenair, Inc. A Dim .062 (1.6) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) B Dia Ref .362 (9.2) .490 (12.4) .607 (15.4) .732 (18.6) .857 (21.8) .962 (24.4) 1.087 (27.6) 1.212 (30.8) 1.337 (34.0) APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. H 2. Material: Aluminum alloy with electroless nickel finish. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com H-3 E-Mail: sales@glenair.com Assembly Tools TG47 Connector Wrench MIL-DTL-22992 Classes C, J & R TG47 - 20 Basic Part Number Dash Number 5.625 (142.9) Approx. A A GLENAIR, INC. .75 (19.1) Approx. B Male .375 (9.5) Approx Female .75 (19.1) Approx. C TABLE I: Shell Size and Dimensions Shell Size 12 14 16 18 20 22 24 28 32 36 H (c) 2013 Glenair, Inc. A Dim .062 (1.6) 1.250 (31.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.750 (69.9) 2.750 (69.9) 2.750 (69.9) 2.750 (69.9) 2.750 (69.9) B Dia Ref .554 (14.1) .674 (17.1) .804 (20.4) .929 (23.6) 1.052 (26.7) 1.177 (29.9) 1.302 (33.1) 1.522 (38.7) 1.772 (45.0) 1.982 (50.3) C Dia Ref .567 (14.4) .692 (17.6) .817 (20.8) .942 (23.9) 1.068 (27.1) 1.192 (30.3) 1.317 (33.5) 1.536 (39.0) 1.786 (45.4) 2.005 (50.9) APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 2. Material: Aluminum alloy with electroless nickel finish. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com H-4 E-Mail: sales@glenair.com Assembly Tools TG48 Connector Wrench MIL-DTL-38999 Series II TG48 - 20 Basic Part Number Dash Number 5.625 (142.9) Approx. A A GLENAIR, INC. .385 (9.8) Max. .390 (9.9) Max. .375 (9.5) Approx B TABLE I: Shell Size and Dimensions Shell Size 8 10 12 14 16 18 20 22 24 (c) 2013 Glenair, Inc. A Dim B Dia Ref .062 (1.6) 1.250 (31.8) .362 (9.2) 1.250 (31.8) .490 (12.4) 1.250 (31.8) .607 (15.4) 1.250 (31.8) .732 (18.6) 2.000 (50.8) .857 (21.8) 2.000 (50.8) .962 (24.4) 2.000 (50.8) 1 .087 (27.6) 2.000 (50.8) 1 .212 (30.8) 2.000 (50.8) 1 .337 (34.0) APPLICATION NOTES H 1. Metric dimensions (mm) are indicated in parentheses. 2. Material: Aluminum alloy with electroless nickel finish. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com H-5 E-Mail: sales@glenair.com Assembly Tools TG52 Connector Wrench MIL-C-81511 Series II & IV TG52 - 14 Basic Part Number Shell Size 1 Polarization 1, 2, 3, 4, 5, 6 (Omit for Normal) 5.625 (142.9) Approx. A A .75 (19.1) Approx. .75 (19.1) Approx. B .375 (9.5) Approx C TABLE I: Shell Size and Dimensions H Shell Size 8 10 14 16 18 (c) 2013 Glenair, Inc. A Dim B Dia .062 (1.6) Ref 1.250 (31.8) .382 (9.7) 1.250 (31.8) .507 (12.9) 2.000 (50.8) .757 (19.2) 2.000 (50.8) .883 (22.4) 2.000 (50.8) 1.007 (25.6) C Dia Ref .386 (9.8) .511 (13.0) .761 (19.3) .887 (22.5) 1.011 (25.7) APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 2. Material: Aluminum alloy with electroless nickel finish. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com H-6 E-Mail: sales@glenair.com Assembly Tools TG60 Connector Wrench MIL-DTL-27599, MIL-DTL-38999 Series I TG60 - 15 Basic Part Number Shell size 5.625 (142.9) Approx. A A GLENAIR, INC. .612 (15.5) Max. C .375 (9.5) Approx B TABLE I: Shell Size and Dimensions Shell Size 9 11 13 15 17 19 21 23 25 (c) 2013 Glenair, Inc. A Dim Ref 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) B Dia Ref .442 (11.2) .570 (14.5) .687 (17.4) .812 (20.6) .937 (23.8) 1.042 (26.5) 1.167 (29.6) 1.292 (32.8) 1.417 (36.0) C Dia Ref .647 (16.4) .647 (16.4) .647 (16.4) .647 (16.4) .647 (16.4) .647 (16.4) .617 (15.7) .617 (15.7) .617 (15.7) APPLICATION NOTES H 1. Metric dimensions (mm) are indicated in parentheses. 2. Material: Aluminum alloy with electroless nickel finish. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com H-7 E-Mail: sales@glenair.com Assembly Tools TG83 Wrench for SJT Connectors (LN29729) TG83 - 20 Basic Part Number Shell size 5.625 (142.9) Approx. A A GLENAIR, INC. .626 (15.9) Max. .632 (16.1) Max. .375 (9.5) Approx B TABLE I: Shell Size and Dimensions Shell Size 8 10 12 14 16 18 20 22 24 H (c) 2013 Glenair, Inc. A Dim B Dia .062 (1.6) Ref 1.250 (31.8) .362 (9.2) 1.250 (31.8) .490 (12.4) 1.250 (31.8) .607 (15.4) 1.250 (31.8) .732 (18.6) 2.000 (50.8) .857 (21.8) 2.000 (50.8) .962 (24.4) 2.000 (50.8) 1 .087 (27.6) 2.000 (50.8) 1 .212 (30.8) 2.000 (50.8) 1 .337 (34.0) APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 2. Material: Aluminum alloy with electroless nickel finish. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com H-8 E-Mail: sales@glenair.com Assembly Tools TG90 Connector Wrench MIL-DTL-38999 Series III TG90 - 15 Basic Part Number Shell Size A Polarization A, B, C, D, E (Omit for Normal) 5.625 (142.9) Approx. A Sq. GLENAIR, INC. B .375 (9.5) Approx C TABLE I: Shell Size and Dimensions Shell Size 09 11 13 15 17 19 21 23 25 (c) 2013 Glenair, Inc. A Dim .062 (1.6) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.750 (69.9) 2.750 (69.9) B Dia Ref .438 (11.1) .566 (14.4) .678 (17.2) .802 (20.4) .928 (23.6) 1.032 (26.2) 1.155 (29.3) 1.283 (32.6) 1.407 (35.7) C Dia Ref .441 (11.2) .569 (14.5) .682 (17.3) .811 (20.6) .931 (23.6) 1.037 (26.3) 1.162 (29.5) 1.288 (32.7) 1.411 (35.8) APPLICATION NOTES H 1. Metric dimensions (mm) are indicated in parentheses. 2. Material: Aluminum alloy with electroless nickel finish. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com H-9 E-Mail: sales@glenair.com Assembly Tools 600B005 Plug and Receptacle Holder AS50151 Series AS31001 Solder and Crimp, MIL-DTL-83723 Series II KIT - Complete Kit 600 Product Series B Connector Designator 005 - 16 Basic Number Shell Size (Omit for Kit) P - KIT Holder Type P - Plug Holder R - Receptacle Holder NO POLARIZATION REQUIRED C C A B RECEPTACLE HOLDER PLUG HOLDER TABLE I: Dash Number, Torque and Dimensions H Dash No. 08 10 12 14 16 18 20 22 24 28 32 Torque Max (In/lbs) 60 80 110 120 120 120 140 140 140 150 150 A Dia Max .456 (11.6) .575 (14.6) .691 (17.6) .816 (20.7) .941 (23.9) 1.060 (26.9) 1.185 (30.1) 1.310 (33.3) 1.435 (36.4) 1.685 (42.8) 1.935 (49.1) B Dia Max .365 (9.3) .440 (11.2) .555 (14.1) .675 (17.1) .805 (20.4) .930 (23.6) 1.050 (26.7) 1.175 (29.8) 1.300 (33.0) 1.520 (38.6) 1.777 (45.0) C Dim Max 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 36 150 2.177 (55.3) 1.980 (50.3) 1.250 (31.8) (c) 2013 Glenair, Inc. APPLICATION NOTES 1. Also mates with MIL-C-83723, Series II. 2. Metric dimensions (mm) are indicated in parentheses. 3. Material: Case hardened carbon steel with electroless nickel finish. 4. Receptacle and plug holder drives: 1/4" Shell sizes 08, 10, 12; 3/8" - Shell sizes 14 and up. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com H-10 E-Mail: sales@glenair.com Assembly Tools 600C005 Plug and Receptacle Holder MIL-DTL-22992 Classes C, J & R KIT - Complete Kit 600 Product Series C Connector Designator 005 - 18 Basic Number P - KIT Shell Size (Omit for Kit) Holder Type P - Plug Holder R - Receptacle Holder C C B A RECEPTACLE HOLDER PLUG HOLDER TABLE I: Dash Number, Torque and Dimensions Dash No. 12 14 16 18 20 22 24 28 32 Torque Max (In/lbs) 110 120 120 120 140 140 140 150 150 A Dia Max .824 (20.9) .950 (24.1) 1.058 (26.9) 1.183 (30.0) 1.315 (33.4) 1.425 (36.2) 1.683 (42.7) 1.931 (49.0) 2.183 (55.4) B Dia Max .552 (14.0) .677 (17.2) .802 (20.4) .927 (23.5) 1.053 (26.7) 1.177 (29.9) 1.302 (33.1) 1.521 (38.6) 1.771 (45.0) C Dim Max 1.280 (32.5) 1.280 (32.5) 1.280 (32.5) 1.280 (32.5) 1.280 (32.5) 1.280 (32.5) 1.280 (32.5) 1.280 (32.5) 1.280 (32.5) 36 150 2.445 (62.1) 1.990 (50.5) 1.280 (32.5) (c) 2013 Glenair, Inc. APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 2. Material: Case hardened carbon steel with electroless nickel finish. 3. Receptacle and plug holder drives: 1/4" Shell size 12; 3/8" - Shell sizes 14 and up. 4. Consult Factory for larger sizes. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com H-11 E-Mail: sales@glenair.com H Assembly Tools 600D005 Plug and Receptacle Holder MIL-DTL-26482 Series I & II, MIL-DTL-83723 Series I and NAS 1599 KIT - Complete Kit 600 Product Series D Connector Designator 005 - 16 Basic Number Shell Size (Omit for Kit) P - KIT Holder Type P - Plug Holder R - Receptacle Holder NO POLARIZATION REQUIRED C C B A RECEPTACLE HOLDER PLUG HOLDER TABLE I: Dash Number, Torque and Dimensions H Dash No. 08 10 12 14 16 18 20 22 24 Series I Series II 40 40 40 40 40 40 80 80 60 80 110 120 120 120 140 140 A Dia B Dia Max Max .478 (12.1) .358 (9.1) .599 (15.2) .486 (12.3) .758 (19.3) .598 (15.2) .882 (22.4) .723 (18.4) 1.007 (25.6) .848 (21.5) 1.133 (28.8) .948 (24.1) 1.257 (31.9) 1 .073 (27.3) 1.382 (35.1) 1 .198 (30.4) 80 140 1.507 (38.3) 1.323 (33.6) .910 (23.1) Torque Max (In/lbs) (c) 2013 Glenair, Inc. C Dim Max .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) APPLICATION NOTES 1. Also mates with MIL-C-83723, Series I; 40M39569. 2. Metric dimensions (mm) are indicated in parentheses. 3. Material: Case hardened carbon steel with electroless nickel finish. 4. Receptacle and plug holder drives: 1/4" Shell sizes 08, 10, 12; 3/8" - Shell sizes 14 and up. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com H-12 E-Mail: sales@glenair.com Assembly Tools 600E005 Plug and Receptacle Holder MIL-DTL-26500 and MIL-DTL-83723 Series III Polarization 6, 7, 8, 9, 10 - Polarization N - 1, 2, 3, 4, 5 600 Product Series E Connector Designator 005 - 16 Basic Number Shell Size (Omit for Kit) P KIT - Complete Kit N - KIT Holder Type P - Plug Holder R - Receptacle Holder C C B A RECEPTACLE HOLDER PLUG HOLDER TABLE I: Dash Number, Torque and Dimensions Dash No. 08 10 12 14 16 18 20 22 24 Torque Max (In/lbs) 60 80 110 120 120 120 140 140 140 A Dia Max .537 (13.6) .660 (16.8) .830 (21.1) .899 (22.8) 1.026 (26.1) 1.132 (28.8) 1.259 (32.0) 1.382 (35.1) 1.509 (38.3) B Dia Max .424 (10.8) .526 (13.4) .696 (17.7) .765 (19.4) .892 (22.7) .998 (25.3) 1.123 (28.6) 1.248 (31.7) 1.373 (34.9) C Dim Max 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 28* 150 1.740 (44.2) 1.623 (41.2) 1.031 (26.2) APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 2. Material: Case hardened carbon steel with electroless nickel finish. 3. Receptacle and plug holder drives: 1/4" Shell sizes 08, 10, 12; 3/8" - Shell sizes 14 and up. * Non-Military standard shell size (c) 2013 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com H-13 E-Mail: sales@glenair.com H Assembly Tools 600F005 Plug and Receptacle Holder MIL-DTL-27599, MIL-DTL-38999 Series I KIT - Complete Kit 600 Product Series F Connector Designator 005 - 17 Basic Number P - KIT Shell Size (Omit for Kit) Holder Type P - Plug Holder R - Receptacle Holder NO POLARIZATION REQUIRED C C B A RECEPTACLE HOLDER PLUG HOLDER TABLE I: Dash Number, Torque and Dimensions H Dash No. 09 11 13 15 17 19 21 23 Torque Max (In/lbs) 40 40 40 40 40 40 80 80 A Dia Max .577 (14.7) .709 (18.0) .829 (21.1) .954 (24.2) 1.107 (28.1) 1.190 (30.2) 1.315 (33.4) 1.440 (36.6) B Dia Max .438 (11.1) .566 (14.4) .678 (17.2) .803 (20.4) .928 (23.6) 1.033 (26.2) 1.158 (29.4) 1.283 (32.6) C Dim Max 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 25 80 1.565 (39.8) 1.408 (35.8) 1.031 (26.2) (c) 2013 Glenair, Inc. APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 2. Material: Case hardened carbon steel with electroless nickel finish. 3. Receptacle and plug holder drives: 1/4" Shell sizes 08, 10, 12; 3/8" - Shell sizes 14 and up. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com H-14 E-Mail: sales@glenair.com Assembly Tools 600FF005 Plug and Receptacle Holder MIL-DTL-38999 Series II KIT - Complete Kit 600 Product Series FF Connector Designator 005 - 16 Basic Number P - KIT Shell Size (Omit for Kit) Holder Type P - Plug Holder R - Receptacle Holder NO POLARIZATION REQUIRED C C B A RECEPTACLE HOLDER PLUG HOLDER TABLE I: Dash Number, Torque and Dimensions Dash No. 08 10 12 14 16 18 20 22 Torque Max (In/lbs) 40 40 40 40 40 40 80 80 A Dia Max .478 (12.1) .599 (15.2) .758 (19.3) .882 (22.4) 1.007 (25.6) 1.133 (28.8) 1.257 (31.9) 1.382 (35.1) B Dia Max .358 (9.1) .486 (12.3) .603 (15.3) .728 (18.5) .853 (21.7) .958 (24.3) 1.083 (27.5) 1.208 (30.7) C Dim Max .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) 24 80 1.507 (38.3) 1.333 (33.9) .910 (23.1) (c) 2013 Glenair, Inc. APPLICATION NOTES 1. Also mates with 40M38277. 2. Metric dimensions (mm) are indicated in parentheses. 3. Material: Case hardened carbon steel with electroless nickel finish. 4. Receptacle and plug holder drives: 1/4" Shell sizes 08, 10, 12; 3/8" - Shell sizes 14 and up. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com H-15 E-Mail: sales@glenair.com H Assembly Tools 600G005 Plug and Receptacle Holder MIL-DTL-28840 Polarization 1, 2, 3, 4, 5, 6 600 Product Series G 005 - 17 Connector Designator Basic Number Shell Size (Omit for Kit) P KIT - Complete Kit 1 - KIT Holder Type P - Plug Holder R - Receptacle Holder C C B A RECEPTACLE HOLDER PLUG HOLDER TABLE I: Dash Number, Torque and Dimensions H Dash No. 11 13 15 17 19 23 25 29 Torque Max (In/lbs) 80 110 120 120 120 140 140 150 A Dia Max .697 (17.7) .822 (20.8) .995 (25.3) 1.058 (26.9) 1.245 (31.6) 1.433 (36.4) 1.558 (39.6) 1.745 (44.3) B Dia Max .502 (12.8) .626 (15.9) .798 (20.3) .868 (22.0) 1.035 (26.3) 1.220 (31.0) 1.381 (35.1) 1.547 (39.3) C Dim Max .945 (24.0) .945 (24.0) .945 (24.0) .945 (24.0) .945 (24.0) .945 (24.0) .945 (24.0) .945 (24.0) 33 150 1.933 (49.1) 1.739 (44.2) .945 (24.0) (c) 2013 Glenair, Inc. APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 2. Material: Case hardened carbon steel with electroless nickel finish. 3. Receptacle and plug holder drives: 1/4" Shell sizes 08, 10, 12; 3/8" - Shell sizes 14 and up. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com H-16 E-Mail: sales@glenair.com Assembly Tools 600H005 Plug and Receptacle Holder MIL-DTL-38999 Series III Polarization N, A, B, C, D, E 600 Product Series H 005 - 17 Connector Designator Basic Number Shell Size (Omit for Kit) P KIT - Complete Kit N - KIT Holder Type P - Plug Holder R - Receptacle Holder C C B A RECEPTACLE HOLDER PLUG HOLDER TABLE I: Dash Number, Torque and Dimensions Shell Size Commercial Military Ref 09 11 13 15 17 19 21 23 A B C D E F G H 25 J Max Torque ( 5 Inch Lbs) Metal Composite 60 35 80 35 110 40 120 40 120 40 120 40 140 80 140 80 (c) 2013 Glenair, Inc. 140 80 APPLICATION NOTES A Dia Max B Dia Max C Dim Max .577 (14.7) .709 (18.0) .829 (21.1) .954 (24.2) 1.107 (28.1) 1.190 (30.2) 1.315 (33.4) 1.440 (36.6) .438 (11.1) .566 (14.4) .678 (17.2) .803 (20.4) .928 (23.6) 1.033 (26.2) 1.158 (29.4) 1.283 (32.6) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.565 (39.8) 1.408 (35.8) 1.031 (26.2) 1. Metric dimensions (mm) are indicated in parentheses. 2. Material: Case hardened carbon steel with electroless nickel finish. 3. Receptacle and plug holder drives: 1/4" - Shell sizes 08, 10, 12; 3/8" Shell sizes 14 and up. 4. Composite values apply when using Glenair 600-091, 600-157 or 600007 tools. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com H-17 E-Mail: sales@glenair.com H Assembly Tools 600HH005 Plug and Receptacle Holder MIL-DTL-38999 Series IV KIT - Complete Kit 600 Product Series HH 005 - 17 Connector Designator Basic Number P - KIT Shell Size (Omit for Kit) Holder Type P - Plug Holder R - Receptacle Holder NO POLARIZATION REQUIRED C C A B PLUG HOLDER RECEPTACLE HOLDER TABLE I: Dash Number, Torque and Dimensions 11 13 15 17 19 21 23 B C D E F G H Max Torque (Inch Pounds) 80 110 120 120 120 140 140 25 J 140 Shell Size Commercial Military Ref H (c) 2013 Glenair, Inc. A Dia B Dia Max Max .830 (21.1) .515 (13.1) .950 (24.1) .650 (16.5) 1.070 (27.2) .775 (19.7) 1.200 (30.5) .901 (22.9) 1.280 (32.5) 1 .015 (25.8) 1.400 (35.6) 1 .140 (29.0) 1.530 (38.9) 1 .265 (32.1) C Dim Max 1.280 (32.5) 1.280 (32.5) 1.280 (32.5) 1.280 (32.5) 1.280 (32.5) 1.280 (32.5) 1.280 (32.5) 1.660 (42.2) 1.392 (35.4) 1.280 (32.5) APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 2. Material: Case hardened carbon steel with electroless nickel finish. 3. Receptacle and plug holder drives: 1/4" Shell sizes 11 and 13; 3/8" - Shell sizes 15 and up. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com H-18 E-Mail: sales@glenair.com Assembly Tools 600J005 Plug and Receptacle Holder MIL-DTL-81511 Series I, II, III & IV Polarization 1, 2, 3, 4, 5, 6 600 Product Series J 005 - 1F18 Connector Designator Dash Number Basic Number P KIT - Complete Kit 1 - KIT Holder Type P - Plug Holder R - Receptacle Holder C C B A RECEPTACLE HOLDER PLUG HOLDER SERIES I and III: Dash Number, Shell Size, Torque and Dimensions Dash Number Shell Size Commercial Military Ref Max Torque ( 5 Inch Lbs) A Dia Max B Dia Max C Dim Max 1A08 1B10 1D14 1E16 1F18 1G20 1H22 08 10 14 16 18 20 22 A B D E F G H 40 40 40 40 40 40 40 .556 (14.1) .394 (10.0) .681 (17.3) .519 (13.2) .931 (23.6) .769 (19.5) 1.058 (26.9) .895 (22.7) 1.181 (30.0) 1 .019 (25.9) 1.306 (33.2) 1 .144 (29.1) 1.431 (36.3) 1 .269 (32.2) 1J24 24 J 40 1.556 (39.5) 1.394 (35.4) .950 (24.1) .950 (24.1) .950 (24.1) .950 (24.1) .950 (24.1) .950 (24.1) .950 (24.1) .950 (24.1) SERIES II and IV: Dash Number, Shell Size, Torque and Dimensions Dash Number Shell Size Commercial Military Ref Max Torque ( 5 Inch Lbs) A Dia Max B Dia Max C Dim Max 2A08 2B10 2D14 2E16 08 10 14 16 A B D E 40 40 40 40 .544 (13.8) .669 (17.0) .919 (23.3) .045 (26.5) 1 .374 (9.5) .499 (12.7) .749 (19.0) .875 (22.2) .950 (24.1) .950 (24.1) .950 (24.1) .950 (24.1) 2F18 18 F 40 1.169 (29.7) .999 (25.4) .950 (24.1) (c) 2013 Glenair, Inc. APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 2. Material: Case hardened carbon steel with electroless nickel finish. 3. Receptacle and plug holder drives: 1/4" - Shell sizes 08, 10 and 12; 3/8" - Shell sizes 14 and up. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com H-19 E-Mail: sales@glenair.com H Assembly Tools TG90 Connector Wrench MIL-DTL-38999 Series III TG90 - 15 Basic Part Number Shell Size A Polarization A, B, C, D, E (Omit for Normal) 5.625 (142.9) Approx. A Sq. GLENAIR, INC. B .375 (9.5) Approx C TABLE I: Shell Size and Dimensions Shell Size 09 11 13 15 17 19 21 23 25 H (c) 2013 Glenair, Inc. A Dim .062 (1.6) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.750 (69.9) 2.750 (69.9) B Dia Ref .438 (11.1) .566 (14.4) .678 (17.2) .802 (20.4) .928 (23.6) 1.032 (26.2) 1.155 (29.3) 1.283 (32.6) 1.407 (35.7) C Dia Ref .441 (11.2) .569 (14.5) .682 (17.3) .811 (20.6) .931 (23.6) 1.037 (26.3) 1.162 (29.5) 1.288 (32.7) 1.411 (35.8) APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 2. Material: Aluminum alloy with electroless nickel finish. Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com H-20 E-Mail: sales@glenair.com Quick Reference P/N to Page No. Military Standard Backshells and Accessories Quick-Reference Part Number to Page Number Index Part Number AS25042 AS25043 AS50151 AS81511/13 AS81511/14 AS81511/14 AS81511/17 AS81511/18 AS81511/19 AS81511/20 AS81511/29 AS81511/30 AS85049/1 AS85049/2 AS85049/3 AS85049/4 AS85049/5 AS85049/6 AS85049/7 AS85049/8 AS85049/9 AS85049/10 AS85049/11 AS85049/14 AS85049/15 AS85049/16 AS85049/17 AS85049/18 AS85049/19 AS85049/20 AS85049/21 AS85049/23 AS85049/24 AS85049/25 AS85049/26 AS85049/27 AS85049/28 (c) 2013 Glenair, Inc. Page G-2 G-8 F-2 F-3 F-5 F-7 F-8 F-9 F-7 F-10 B-2 B-3 B-4 B-5 B-6 B-7 B-9 B-11 B-13 B-15 B-17 B-19 B-21 B-23 B-25 B-27 B-31 B-35 B-36 B-36 B-37 B-38 B-39 B-41 B-42 B-43 B-45 B-47 B-51 B-52 B-53 B-54 Part Number AS85049/29 AS85049/30 AS85049/31 AS85049/33 AS85049/34 AS85049/36 AS85049/37 AS85049/38 AS85049/39 AS85049/41 AS85049/42 AS85049/43 AS85049/44 AS85049/45 AS85049/46 AS85049/47 AS85049/48 AS85049/49 AS85049/50 AS85049/51 AS85049/52 AS85049/53 AS85049/54 AS85049/55 AS85049/56 AS85049/57 AS85049/58 AS85049/59 AS85049/60 AS85049/61 AS85049/62 AS85049/63 AS85049/69 AS85049/74 AS85049/75 AS85049/76 AS85049/77 AS85049/78 AS85049/79 AS85049/80 Page B-55 B-56 B-57 B-58 B-59 B-60 B-61 B-62 B-63 B-64 B-65 B-66 B-67 B-68 B-69 B-70 B-71 B-72 B-73 B-74 B-75 B-76 B-77 B-78 B-79 B-80 B-81 B-82 B-83 B-84 B-85 B-86 B-87 B-88 B-89 B-90 B-91 B-92 B-93 B-94 Part Number AS85049/81 AS85049/82 AS85049/83 AS85049/84 AS85049/85 AS85049/86 AS85049/87 AS85049/88 AS85049/89 AS85049/90 AS85049/91 AS85049/92 AS85049/93 AS85049/94 AS85049/95 AS85049/96 AS85049/103 AS85049/104 AS85049/105 AS85049/109 AS85049/111 AS85049/112 AS85049/114 AS85049/115 AS85049/118 AS85049/120 AS85049/121 AS85049/123 AS85049/124 AS85049/126 AS85049/127 AS85049/128-3 AS85049/128-4 AS85049/130 AS85049/139 AS85049/140 AS85049/141 AS85049/142 Page B-96 Part Number MIL-DTL-26500 MIL-DTL-26500 MIL-DTL-28840/1 MIL-DTL-28840/2 MIL-DTL-28840/3 MIL-DTL-28840/4 MIL-DTL-28840/5 B-97 B-99 B-101 MIL-DTL-28840/6 MIL-DTL-28840/7 B-103 MIL-DTL-28840/8 B-104 B-105 B-106 B-107 B-108 B-110 B-112 B-114 B-116 B-118 B-120 B-122 B-124 B-126 B-128 B-130 B-132 B-134 B-136 MIL-DTL-28840/9 MIL-DTL-28840/13 MIL-DTL-28840/15 MIL-DTL-28840/22 MIL-DTL-28840/23 MIL-DTL-28840/24 MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999/22 MIL-DTL-38999/28 MIL-DTL-38999/32 MIL-DTL-38999/33 MIL-DTL-38999/50 MIL-DTL-83513/05 MIL-DTL-83538/9 MIL-DTL-83723/27 MIL-DTL-83723/35 B-137 MIL-DTL-83723/50 MIL-DTL-83723/59 MIL-DTL-83723/60 MIL-DTL-83723/59 MIL-DTL-83723/60 MIL-DTL-83723/70 MIL-S-81824/1 MS17349 MS17350 MS27291 B-138 B-140 B-142 B-144 B-146 B-148 B-150 B-152 B-154 B-156 B-158 B-160 Page G-5 G-6 D-2 D-3 D-4 D-5 D-6 D-7 D-8 D-9 D-10 D-11 D-12 D-13 D-14 D-15 D-16 D-17 C-2 C-3 C-4 C-5 C-6 C-7 G-15 G-16 E-2 E-3 E-4 E-5 E-6 E-7 E-8 E-9 G-17 G-3 G-4 J Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com Quick-Reference E-Mail: sales@glenair.com Out of This World INTERCONNECT SOLUTIONS Glenair, Inc. 1211 Air Way * Glendale, California * 91201-2497 Telephone: 818-247-6000 * Fax: 818-500-9912 * sales@glenair.com www.glenair.com Glenair Power Products Group 860 N. Main Street Extension Wallingford, CT 06492 Glenair Microway Systems 7000 North Lawndale Avenue Lincolnwood, IL 60712 Glenair Electric GmbH Schaberweg 28 61348 Bad Homburg Germany Glenair Italia S.p.A. Via Del Lavoro, 7 40057 Quarto Inferiore - Granarolo dell'Emilia Bologna, Italy (c) 2013 Glenair, Inc. Telephone: 203-741-1115 Facsimile: 203-741-0053 sales@glenair.com Glenair UK Ltd 40 Lower Oakham Way Oakham Business Park P.O. Box 37, Mansfield Notts, NG18 5BY England Telephone: +44-1623-638100 Facsimile: +44-1623-638111 sales@glenair.co.uk Telephone: 847-679-8833 Facsimile: 847-679-8849 Glenair Nordic AB Gustav III : S Boulevard 46 S - 169 27 Solna Sweden Telephone: +46-8-50550000 Facsimile: +46-8-50550001 sales@glenair.se Telephone: 06172 / 68 16 0 Facsimile: 06172 / 68 16 90 germany@glenair.com Telephone: +39-051-782811 Facsimile: +39-051-782259 info@glenair.it Printed in U.S.A. Glenair Iberica C/ La Vega, 16 45612 Velada Spain Glenair France SARL 7, Avenue Parmentier Immeuble Central Parc #2 31200 Toulouse France Telephone: +34-925-89-29-88 Facsimile: +34-925-89-29-87 sales@glenair.es Telephone: +33-5-34-40-97-40 Facsimile: +33-5-61-47-86-10 sales@glenair.fr