https://www.phoenixcontact.com/us/products/3002903
02/06/2019Page1/10
Distribution block-PTFIX 6X1,5-G OG-3002903
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Distribution block, bridged internally, nom. voltage: 450 V, nominal current: 17.5 A, connection method: Push-in
connection, number of connections: 6, cross section: 0.14 mm²-2.5 mm², AWG:26-14, width: 12.5 mm, height:
18.7 mm, color: orange, mounting type: adhesive
The figure shows the product in gray
Your advantages
Space-saving, thanks to the compact design
Flexible use, thanks to DIN rail and direct mounting
Space-saving potential distribution, thanks to compact micro potential distributors
Convenient test options, thanks to test openings at every terminal point
Clear arrangement thanks to marking of all terminal points
Key Commercial Data
Packing unit 1 pc
Minimum order quantity 20 pc
GTIN
GTIN 4055626433080
Weight per Piece (excluding packing) 6.000 g
Custom tariff number 85369010
Country of origin Poland
Technical data
General
Note Notes on operation The blocks can be bridged with one another via the
conductor shaft. For corresponding plug-in bridges, see accessories
Number of levels 1
Number of connections 6
https://www.phoenixcontact.com/us/products/3002903
02/06/2019Page2/10
Distribution block-PTFIX 6X1,5-G OG-3002903
Technical data
General
Potentials 1
Nominal cross section 1.5 mm²
Color orange
Insulating material PA
Flammability rating according to UL 94 V0
Rated surge voltage 6 kV
Degree of pollution 3
Overvoltage category III
Insulating material group I
Maximum power dissipation for nominal condition 0.56 W
Ambient temperature (operation) -60 °C ... 130 °C
Maximum load current 26 A
Maximum total current 26 A
Nominal current IN17.5 A
Nominal voltage UN450 V
Open side panel No
Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection guaranteed
Finger protection guaranteed
Result of thermal test Test passed
Proof of thermal characteristics (needle flame) effective duration 30 s
Relative insulation material temperature index (Elec., UL 746 B) 130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold -60 °C
Behavior in fire for rail vehicles (DIN 5510-2) Test passed
Flame test method (DIN EN 60695-11-10) V0
Oxygen index (DIN EN ISO 4589-2) >32 %
NF F16-101, NF F10-102 Class I 2
NF F16-101, NF F10-102 Class F 2
Surface flammability NFPA 130 (ASTM E 162) passed
Specific optical density of smoke NFPA 130 (ASTM E 662) passed
Smoke gas toxicity NFPA 130 (SMP 800C) passed
Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
https://www.phoenixcontact.com/us/products/3002903
02/06/2019Page3/10
Distribution block-PTFIX 6X1,5-G OG-3002903
Technical data
Dimensions
Width 12.5 mm
Length 21.6 mm
Height 18.7 mm
Connection data
Connection method Push-in connection
Connection in acc. with standard IEC 60998-2-2
Conductor cross section solid min. 0.14 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section AWG min. 26
Conductor cross section AWG max. 14
Conductor cross section flexible min. 0.14 mm²
Conductor cross section flexible max. 1.5 mm²
Min. AWG conductor cross section, flexible 24
Max. AWG conductor cross section, flexible 12
Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max. 1.5 mm²
Stripping length 8 mm ... 10 mm
Internal cylindrical gage A1 / B1
Standards and Regulations
Connection in acc. with standard IEC 60998-2-2
Flammability rating according to UL 94 V0
Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
Environmental Product Compliance
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
Circuit diagram
https://www.phoenixcontact.com/us/products/3002903
02/06/2019Page4/10
Distribution block-PTFIX 6X1,5-G OG-3002903
Classifications
eCl@ss
eCl@ss 4.0 27141120
eCl@ss 4.1 27141120
eCl@ss 5.0 27141120
eCl@ss 5.1 27141120
eCl@ss 6.0 27141100
eCl@ss 7.0 27141120
eCl@ss 8.0 27141120
eCl@ss 9.0 27141120
ETIM
ETIM 2.0 EC000897
ETIM 3.0 EC000897
ETIM 4.0 EC000897
ETIM 5.0 EC000897
ETIM 6.0 EC000897
UNSPSC
UNSPSC 6.01 30211811
UNSPSC 7.0901 39121410
UNSPSC 11 39121410
UNSPSC 12.01 39121410
UNSPSC 13.2 39121410
Approvals
Approvals
Approvals
CSA / UL Recognized / cUL Recognized / EAC / cULus Recognized
Ex Approvals
Approval details
https://www.phoenixcontact.com/us/products/3002903
02/06/2019Page5/10
Distribution block-PTFIX 6X1,5-G OG-3002903
Approvals
CSA http://www.csagroup.org/services-industries/product-listing/ 13631
D B C
Nominal voltage UN 300 V 300 V 150 V
Nominal current IN 10 A 15 A 15 A
mm²/AWG/kcmil 26-14 26-14 26-14
UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425
D B C
Nominal voltage UN 300 V 300 V 150 V
Nominal current IN 10 A 15 A 15 A
mm²/AWG/kcmil 26-14 26-14 26-14
cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425
D B C
Nominal voltage UN 300 V 300 V 150 V
Nominal current IN 10 A 15 A 15 A
mm²/AWG/kcmil 26-14 26-14 26-14
EAC RU C-
DE.AI30.B.01102
cULus Recognized
Accessories
Accessories
Insulating sleeve
https://www.phoenixcontact.com/us/products/3002903
02/06/2019Page6/10
Distribution block-PTFIX 6X1,5-G OG-3002903
Accessories
Insulating sleeve-ISH 1,5/0,2-3206131
Insulating sleeve, color: white
Insulating sleeve-ISH 1,5/0,5-3031034
Insulating sleeve, color: gray
Jumper
Plug-in bridge-FBS 2-4-3030116
Plug-in bridge, pitch: 4.2 mm, number of positions: 2, color: red
Plug-in bridge-FBS 2-4 GY-3030118
Plug-in bridge, pitch: 4.2 mm, number of positions: 2, color: gray
Plug-in bridge-FBS 2-4 BU-3030117
Plug-in bridge, pitch: 4.2 mm, number of positions: 2, color: blue
https://www.phoenixcontact.com/us/products/3002903
02/06/2019Page7/10
Distribution block-PTFIX 6X1,5-G OG-3002903
Accessories
Labeled terminal marker
Marking foil for zack marker strip-SK 3,8 REEL P4,15 WH CUS-0825990
Marking foil for zack marker strip, white, labeled according to customer specifications, mounting type: adhesive, for
terminal block width: 4.15 mm, lettering field size: continuous x 3.8 mm
Marker card-SK 2,8 REEL P5,2 WH CUS-8199986
Marker card, can be ordered: By card, white, labeled according to customer specifications, mounting type: adhesive, for
terminal block width: 5.2 mm, lettering field size: continuous x 2.8 mm
Marker card-SK 3,8 REEL P5,2 WH CUS-8199989
Marker card, can be ordered: By card, white, labeled according to customer specifications, mounting type: adhesive, for
terminal block width: 5.2 mm, lettering field size: continuous x 3.8 mm
Mounting material
Flange-PTFIX 1,5-F-1049503
Flange, with screw-on fixing, width: 7.7 mm, height: 17.7 mm, color: gray, mounting type: Screw mounting
DIN rail adapter-PTFIX 1,5-NS15A-1049500
DIN rail adapter, width: 8 mm
https://www.phoenixcontact.com/us/products/3002903
02/06/2019Page8/10
Distribution block-PTFIX 6X1,5-G OG-3002903
Accessories
DIN rail adapter-PTFIX 1,5-NS35-1049497
DIN rail adapter
Support bracket-PTFIX 1,5-NS35AD-1049498
Support bracket
DIN rail adapter-PTFIX 1,5-RZF-1050613
DIN rail adapter
Terminal marking
Marking foil for zack marker strip-TML (EX3,8)R-0801837
Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0,
THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2,
mounting type: adhesive, for terminal block width: 30000 mm, lettering field size: 30,000 x 3.8 mm
Marking foil for zack marker strip-TML (104X3,8)R-0801833
Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0,
THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2,
mounting type: adhesive, for terminal block width: 104 mm, lettering field size: 104 x 3.8 mm
https://www.phoenixcontact.com/us/products/3002903
02/06/2019Page9/10
Distribution block-PTFIX 6X1,5-G OG-3002903
Accessories
Marking foil for zack marker strip-TML (104X3,8)R-0801833
Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0,
THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2,
mounting type: adhesive, for terminal block width: 104 mm, lettering field size: 104 x 3.8 mm
Marking foil for zack marker strip-TML (104X2,8)R-0801832
Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0,
THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2,
mounting type: adhesive, for terminal block width: 104 mm, lettering field size: 104 x 2.8 mm
Marking foil for zack marker strip-TML (EX3,8)R-0801837
Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0,
THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2,
mounting type: adhesive, for terminal block width: 30000 mm, lettering field size: 30,000 x 3.8 mm
Marking foil for zack marker strip-TML (EX2,8)R-0801836
Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0,
THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2,
mounting type: adhesive, for terminal block width: 30000 mm, lettering field size: 30,000 x 2.8 mm
Marker for terminal blocks-US-TML (104X3,8)-0830768
Marker for terminal blocks, Card, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID,
THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, for terminal
block width: 104 mm, lettering field size: 104 x 3.8 mm
https://www.phoenixcontact.com/us/products/3002903
02/06/2019Page10/10
Distribution block-PTFIX 6X1,5-G OG-3002903
Accessories
Marker for terminal blocks-US-TML (104X2,8)-0830767
Marker for terminal blocks, Card, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID,
THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, for terminal
block width: 104 mm, lettering field size: 104 x 2.8 mm
Marker card-SK U/3,8 WH:UNBEDRUCKT-0803906
Marker card, Sheet, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, Office printing systems,
mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 3.8 mm
Marker card-SK U/2,8 WH:UNBEDRUCKT-0803883
Marker card, Sheet, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, Office printing systems,
mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 2.8 mm
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com