Glass Encapsulated TransGuard(R) Automotive Series GENERAL DESCRIPTION The Glass Encapsulated TransGuard(R) Automotive Series are zinc oxide (ZnO) based ceramic semiconductor devices with non-linear, bi-directional voltage-current characteristics. They have the advantage of offering bi-directional overvoltage protection as well as EMI/RFI attenuation in a single SMT package. The Automotive Series high current and high energy handling capability make them well suited for protection against automotive related transients. These large case size parts extend TransGuard range into high energy applications. In addition the glass encapsulation provides enhanced resistance against harsh environment or process such as acidic environment, salts or chlorite flux. GENERAL CHARACTERISTICS Operating Temperature: -55C to 125C FEATURES APPLICATIONS * High Reliability * High Energy Absorption (Load Dump) * High Current Handling * Bi-Directional protection * EMI/RFI attenuation in off-state * Multi-strike capability * Sub 1nS response to ESD strike * AEC Q200 Qualified * Various Automotive Applications * Internal Combustion Engine (ICE) Vehicles * Hybrid Electric Vehicles (HEV) * Plug-in Hybrid Electric Vehicles (PHEV) * Commercial Vehicles * Sensors * DC Motor * LIN BUS * Relays * ECU * and more * Applications where Glass Encapsulation is needed for Harsh Environment/AcidResistance HOW TO ORDER V G AS 1812 16 P 400 Varistor Glass Encapsulate Chip Automotive Series Chip Size Working Voltage Engergy Rating Clamping Voltage 16 = 16Vdc 34 = 34Vdc 65 = 65Vdc S = 2.0J P = 2.9J U = 5.0J Y = 7.2-12J 400 = 42V 770 = 77V 131 = 135V 1210 1812 2220 R P Package Termination D = 7" reel R = 7" reel T = 13" reel P = Ni/Sn plated PHYSICAL DIMENSIONS: mm (inches) Size (EIA) 1210 1812 2220 Length (L) 3.200.20 (0.1260.008) 4.500.30 (0.1770.012) 5.700.40 (0.2240.016) Width (W) 2.490.20 (0.0980.008) 3.200.30 (0.1260.012) 5.000.40 (0.1970.016) Max Thickness (T) 1.70 (0.067) 2.00 (0.079) 2.50 (0.098) Land Length (t) 0.14 max. (0.045 max.) 1.00 max. (0.040 max.) 1.00 max. (0.040 max.) 1 Glass Encapsulated TransGuard(R) Automotive Series ELECTRIAL CHARACTERISTICS AVX PN VW (DC) VW (AC) VB VC IVC IL ET ELD IP Cap Freq VJump PDiss, MAX VGAS181216P400 VGAS222016Y400 VGAS121034S770 VGAS181234U770 VGAS222034Y770 VGAS121065P131 16 16 34 34 34 65 11 11 30 30 30 50 24.510% 24.510% 47.010% 47.010% 47.010% 82.010% 42 42 77 77 77 135 5 10 2.5 5 10 2.5 10 10 15 15 15 15 2.9 7.2 2 5 12 2.7 10 25 3 6.1 25 - 1000 1500 400 800 2000 350 5000 13000 1000 1500 6300 600 K K K K K K 27.5 25.5 48 48 48 48 0.07 0.1 0.04 0.08 0.24 0.05 VW(DC) VW(AC) VB VC IVC IL ET ELD IP Cap DC Working Voltage [V] AC Working Voltage [V] Typical Breakdown Votage [V @ 1mADC, 25C] Clamping Voltage [V @ IIVC] Test Current for VC [A, 8x20s] Maximum leakage current at the working voltage, 25C [A] VJump PDISS Transient Energy Rating [J, 10x1000S] Load Dump Energy (x10) [J] Peak Current Rating [A, 8x20S] Typical capacitance [pF] @ frequency specified and 0.5VRMS, 25C, M = 1MHz, K = 1kHz Jump Start [V, 5 min] Power Dissipation [W] AUTOMOTIVE SERIES - LOAD DUMP TEST According to ISO DP7637 rev 2 Pulse 5 Voltage (V) Energy (Joules) Automotive Load Dump Pulse (According to ISO 7637 Pulse 5) Time (msec) 12V SYSTEMS VGAS181216P400 100ms 200ms 400ms VGAS222016Y400 100ms 200ms 400ms 2 0.5 46 37 32 0.5 53 50 47 1 52 41 35 1 60 55 50 4 72 59 51 4 77 73 66 When using the test method indicated below, the amount of Energy dissipated by the varistor must not exceed the Load Dump Energy value specified in the product table.